Table Saw. Blade Guards Anti-Kickback Device Power Switch.
-
Upload
noah-atkins -
Category
Documents
-
view
237 -
download
0
Transcript of Table Saw. Blade Guards Anti-Kickback Device Power Switch.
Table SawTable Saw
Blade Guards
Anti-Kickback Device
Power Switch
Lock Out Switch
Blade Elevation/Lowering WheelBlade Angle Adjusting Wheel
Measuring ScaleFence Lock KnobFence
Always Use A Push Stick
Table Saw SafetyTable Saw Safety Prior to starting the table saw Prior to starting the table saw
you MUST:you MUST:
Ask Permission (ALWAYS)Ask Permission (ALWAYS) Be ready to workBe ready to work
Table Saw SafetyTable Saw Safety Prior to starting the table saw you Prior to starting the table saw you
MUST:MUST:Ensure gauds and anti-kickback Ensure gauds and anti-kickback
Devices are in placeDevices are in place
Ensure the blade is SQUAREEnsure the blade is SQUARE
Set the blade height 5mm above the Set the blade height 5mm above the stock to be cutstock to be cut
Table Saw SafetyTable Saw Safety Prior to starting the table saw Prior to starting the table saw
you MUST:you MUST:
Ensure you have a push stick Ensure you have a push stick at the readyat the ready
Ensure that the piece to be cut Ensure that the piece to be cut is at least 12” or 30cm longis at least 12” or 30cm long
Table Saw SafetyTable Saw Safety When ripping wood on the table When ripping wood on the table
saw you must:saw you must: Place the piece of wood you are Place the piece of wood you are
keeping - against the fencekeeping - against the fence Using a push stick – push wood Using a push stick – push wood
all the way through the bladeall the way through the blade
Table Saw SafetyTable Saw Safety When cross cutting on the When cross cutting on the
table saw you MUST:table saw you MUST:
Use the Miter GaugeUse the Miter Gauge Ensure the fence is well clear Ensure the fence is well clear
Table Saw SafetyTable Saw Safety Never Never NeverNever Never Never
Reach over the blade to grab Reach over the blade to grab a piece of wooda piece of wood
Make free hand cuts on the Make free hand cuts on the table sawtable saw
Table Saw SafetyTable Saw Safety Never Never NeverNever Never Never
Make any adjustments while Make any adjustments while the saw is runningthe saw is running
Use the fence WITH the Miter Use the fence WITH the Miter GaugeGauge
AssignmentAssignment