TABLE OF CONTENT Glands.pdf · 7) A2 Industrial Cable Gland 8) TRS Cable Gland 9) G Type Gland 10)...

www.superimpex.com, www.aceelectricals.com

305, Adhyaru Industrial Estate. Sun Mill Compound, Lower Parel (W), Mumbai – 400 013. INDIA

Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933 Email: [email protected]

TABLE OF CONTENT

1) Technical Data

2) BW Industrial Gland (2 Part)

3) BW Industrial Gland (3 Part)

4) CW Cable Gland (3 Part)

5) CW Cable Gland (4 Part)

6) E1W Brass Gland

7) A2 Industrial Cable Gland

8) TRS Cable Gland

9) G Type Gland

10) Wiping Gland

11) Kit Packing

12) PVC Shroud/Sleeve

13) Earth Tag

14) Hexagonal Cable Gland With Metric Thread

15) Hexagonal Cable Gland With PG Thread

16) Round Cable Gland With Metric Thread

17) Round Cable Gland With PG Thread

18) Marine - Use Watertight Cable Glands

19) Reducers

20) Enlarger

21) Round Stop Plug

22) Hexagonal Stop Plug

23) Lock Nuts

24) Serated Washers

25) Bolted Gland

26) O Ring

27) Tinned Brass Line Tap

28) Brass Neutral Link/Bar & Connector

29) Brass Earthing Terminals




TECHNICAL DATA General Specification - BS Standard BS 6121 part 1989 MATERIAL- A) GLANDS - Bodies, Caps & Rings are manufactured in plain Brass or Tin - Nickle Plated Brass. B) SEALS - Nitrile Rubber / Natural Rubber / EPDM C) SLEEVES - Black Poly Vinyl Chloride (PVC) D) EARTH TAG - Brass Self Colour E) LOCKNUT - Brass or Galvanised

Gland Selection Chart The Gland sizes recommended are in accordance with calculations based on cables manufactured to BS 6346 (1969) and ACE does not accept any responsibility for cables that prove to deviate materially from the nominal diameters quoted in BS 6346 (1969).

600/1000V Stranded Copper Conductors PVC Insulated with Steel Wire Armour & PVC Sheathed Overall

Cable Size Conductor

Number of Cores

Nom. Area mm

2

Neutral 1 2 3 31/2 4 5 7 10 12 19 27 37 48

1.5 - - 20/16 20/16 - 20S 20S 20S 20 20 25 25 32 32

2.5 - - 20S 20S - 20S 20S 20 25 25 25 32 32 40

4 - - 20S 20 - 20 20 25 25 32 32 40

6 - - 20 20 - 20

10 - - 25 25 - 25

16 - - 25 25 - 25

25 16 - 32 32 32 32

25 25

32

35 16 - 32 32 32 40

25 32

32

50 25 25 32 32 32 40

70 35 25 32 40 40 40

95 50 25 40 40 50S 50S

120 70 32 40 50S 50 50

150 70 32 50S 50 50 63S

185 95 32 50 50 63S 63

240 120 40 50 63S 63 75S

300 150 40 63S 63 75S 75

300 185 - - - 75 -

400 185 50S 63 75S 90 90

500 - 50 - - - -

630 - 50 - - - -

800 - 63S - - - -

1000 - 63 - - - -

Entry Thread - ISO Metric Following threads are available on request- Imperial Thread, NPT Thread, PG Thread

Cable Gland Size

ISO Metric NPT PG PF/BSP Imperial

16 M16 1/2" 11 - 5/8"

20/16 M20 1/2" 11 1/2" 3/4"

20S M20 1/2" 13.5 1/2" 3/4"

20 M20 1/2" 16 1/2" 3/4"

25 M25 3/4" 25 3/4" 1"

32 M32 1" 21 1" 1-1/4"

40 M40 1-1/4" 29 1-1/4" 1-1/2"

50S M50 1-1/2" 36 1-1/2" 2

50 M50 2 36 2 2

63S M63 2 42 2 2-1/2"

63 M63 2-1/2" 48 2-1/2" 2-1/2"

75S M75 2-1/2" - 2-1/2" 3

75 M75 3" - 3 3

90 M90 3" - 3 3-1/2"




BW INDUSTRIAL CABLE GLAND (2 PART)

APPLICATION - For use with Armour or Braided cable, Secures armouring & provides electrical continuity between armour & gland entry component, mainly used in dry & indoor condition. DESIGN FEATURES - * 2 part armour lock * Knurled armour lock produces a low resistance earth clip

Size Cable Dimensions Accomodated Gland Dimensions Product Code

Under

Armour

Dia. A Max.

mm

Overall

Dia. B

Max. mm

Armour

Wire

Diameter C

mm

ISO Entry Thread Approx

Length

From

Shoulder

F mm

Hexagon size

Across Across

Dia.

D mm

Length

E mm

Flat

G mm

Corners

Hmm

16 8.60 13.50 0.90 16 10 23.00 20.00 23.00 ABW - 16

20 S 12.30 17.00 0.90/1.25 20 10 23.00 23.00 24.00 ABW - 20 S

20 14.30 20.00 0.90/1.25 20 10 30.00 25.00 27.00 ABW - 20

25 S 18.00 23.80 1.25/1.60 25 10 30.00 31.00 32.50 ABW - 25 S

25 20.40 27.00 1.25/1.60 25 10 32.00 30.00 38.50 ABW - 25

32 26.50 33.00 1.60/2.00 32 10 36.00 41.50 45.50 ABW - 32

40 S 31.00 37.00 1.60/2.00 40 10 36.00 45.00 50.00 ABW - 40 S

40 32.50 43.00 1.60/2.00 40 15 40.00 49.00 54.00 ABW - 40

50 S 37.80 48.00 2.00/2.50 50 15 40.00 58.00 65.00 ABW - 50 S

50 44.00 53.00 2.00/2.50 50 15 45.00 62.30 69.50 ABW - 50

63 S 50.50 60.50 2.50 63 15 45.00 70.00 77.00 ABW - 63 S

63 56.50 65.50 2.50 63 15 50.00 76.30 85.00 ABW - 63

75 S 62.50 72.00 2.50 75 15 50.00 85.00 95.00 ABW - 75 S

75 67.50 78.50 2.50/3.15 75 15 75.00 90.50 99.00 ABW - 75

90 80.00 93.00 3.15 90 20 75.00 112.00 125.00 ABW - 90

BW INDUSTRIAL CABLE GLAND (3 PART) Similar in application & design to the BW (2 part) gland. However, an extra component is added, a cone ring. This prevents rotation of the wire & is used instead of a knurled cone.




CW CABLE GLAND (3 PART) APPLICATION - For use with Armoured cable, secures armouring & provides electrical continuity between armour and gland entry component. Also provides a seal on the outer sheath of the cable thus ensuring no damage to cable sheathing. These are used both indoor & outdoor, in all climatic conditions as it is weatherproof & waterproof. DESIGN FEATURES - * 2 Part armour / earth lock * Knurled armour lock produces a low resistance earth clip


Under Armour Dia. A Max. mm

Overall Dia. B Max. mm

Armour Wire Dia. C

mm

ISO Entry Thread Approx Length From

Shoulder

Hexagon Size

Across Across

Dia. D mm

Length E mm

F mm Flat G mm

Corners H mm

16 8.60 13.50 0.90 16 10 40.00 20.00 23.00 ACW - 16

20 S 12.50 17.00 0.90/1.25 20 10 47.00 22.00 29.00 ACW - 20 S

20 14.40 20.50 0.90/1.25 20 10 47.00 26.00 29.00 ACW - 20

25 S 17.80 23.80 1.25/1.60 25 10 50.00 31.00 34.00 ACW - 25 S

25 20.40 27.00 1.25/1.60 25 10 50.00 34.00 38.50 ACW - 25

32 26.50 33.00 1.60/2.00 32 10 55.00 41.50 46.50 ACW - 32

40 S 31.00 37.00 1.60/2.00 40 10 60.00 45.00 50.00 ACW - 40 S

40 32.50 40.80 1.60/2.00 40 15 60.00 49.00 54.00 ACW - 40

50 S 37.80 45.00 2.00/2.50 50 15 65.00 51.00 64.00 ACW - 50 S

50 44.00 51.50 2.00/2.50 50 15 65.00 62.30 69.50 ACW - 50

63 S 50.50 60.50 2.50 63 15 70.00 70.00 78.00 ACW - 63 S

63 56.50 65.50 2.50 63 15 70.00 76.30 85.00 ACW - 63

75S 62.50 72.00 2.50 75 15 75.00 85.00 95.00 ACW - 75 S

75 67.50 78.50 2.50/3.15 75 15 75.00 91.00 112.00 ACW - 75

90 80.00 90.00 3.15 90 20 90.00 103.00 115.00 ACW - 90

CW CABLE GLAND (4 PART)

Similar in application & design to the CW (3 part) gland. However an extra component is added, a cone ring.

This prevents rotation of the wire & is used instead of a knurled cone.




E1W CABLE GLAND

APPLICATION- For use with all types of SWA extruded bedding cable where it is essential to produce IP 66 seal on to the outer sheath and also produce an IP 66 or explosion proof seal on inner sheath. It provides seals on to both inner sheath & outer sheath of the cable. DESIGN FEATURES - * 2 Part armour / earth lock. * Knurled armour lock produces a low resistance earth clip. * Inner & outer displacement seal. * Rated at IP 66 in conjunction with entry thread seal.


Under Armour

Dia. A Max. mm

Overall Dia. B

Max. mm

Armour Wire Dia. C mm

ISO Entry Thread Approx Length From

Shoulder

Hexagon Size

Across Across

Dia. D mm

Length E mm

F mm Flat G mm

Corners H mm

16 8.60 13.50 0.90 16 10 40.00 20.00 23.00 AE1W - 16

20 S 12.50 15.00 0.90/1.25 20 10 45.00 24.00 28.00 AE1W - 20 S

20 14.40 20.50 0.90/1.25 20 10 45.00 27.00 31.00 AE1W - 20

25 S 17.80 23.80 1.25/1.60 25 10 50.00 31.00 34.00 AE1W - 25 S

25 20.40 27.00 1.25/1.60 25 10 50.00 34.00 38.50 AE1W - 25

32 26.50 33.00 1.60/2.00 32 10 55.00 41.50 46.50 AE1W - 32

40 S 31.00 37.00 1.60/2.00 40 10 60.00 45.00 50.00 AE1W - 40 S

40 32.50 40.80 1.60/2.00 40 15 60.00 49.00 54.00 AE1W - 40

50 S 37.80 48.00 2.00/2.50 50 15 65.00 58.00 65.00 AE1W - 50 S

50 44.00 53.50 2.00/2.50 50 15 65.00 62.30 69.50 AE1W - 50

63 S 50.50 60.50 2.50 63 15 70.00 70.00 78.00 AE1W - 63 S

63 56.50 65.50 2.50 63 15 70.00 76.30 85.00 AE1W - 63

75 S 62.50 72.00 2.50 75 15 75.00 85.00 95.00 AE1W - 75 S

75 67.50 78.50 2.50/3.15 75 15 75.00 90.50 99.00 AE1W - 75

90 80.00 94.00 3.15 90 20 90.00 112.00 125.00 AE1W - 90




A2 INDUSTRIAL CABLE GLAND APPLICATION- For use with unarmoured cables with rubber outer sheath. Secures outer sheath of cable. Displacement seal concept makes it suitable for Indoor & Outdoor application. DESIGN FEATURES - * Outer displacement seal.

Size Cable Dimensions Accomodated

Gland Dimensions Product Code

Overall Diameter A ISO Entry Thread

Approx Length From

Shoulders

Hexagon Size

Dia. Length Across Flat Across Corners

Min. mm Max. mm D mm E mm F mm G mm H mm

16 4.50 8.50 16 10 20.00 20.00 23.00 AA2 - 16

20 S 8.00 11.50 20 10 22.00 22.00 25.00 AA2 - 20 S

20 11.00 14.00 20 10 22.00 22.00 25.00 AA2 - 20

25 S 14.00 17.50 20 10 25.00 30.00 34.00 AA2 - 25 S

25 17.50 20.40 32 10 26.00 30.00 34.00 AA2 - 25

32 20.00 26.00 40 10 30.00 36.00 40.00 AA2 - 32

40 S 26.00 30.00 40 10 31.00 46.00 52.00 AA2 - 40 S

40 30.00 33.00 40 15 31.00 46.00 52.00 AA2 - 40

50 S 33.00 38.00 50 15 33.00 55.00 61.00 AA2 - 50 S

50 38.00 44.00 50 15 33.00 56.00 62.00 AA2 - 50

63 S 44.00 50.50 63 15 35.00 70.00 77.50 AA2 - 63 S

63 50.00 56.00 63 15 35.00 70.00 77.50 AA2 - 63

75 S 56.50 62.00 75 15 35.00 80.00 89.00 AA2 - 75 S

75 62.00 68.00 75 15 40.00 80.00 89.00 AA2 - 75

90 68.00 78.00 90 20 45.00 100.00 112.00 AA2 - 90

100 78.00 88.00 100 20 45.00 112.00 125.00 AA2 - 100

TRS CABLE GLAND APPLICATION- Recommended for use with braided, Co-axial or SWA cables. A rubber Seal compresses on tightening to provide a tight fit against cable.

Gland Size

Shroud Size

A B C D Product Code

20 S S 20 S 8 20 21.5 8 ATRS - 20 S

25 S 25 S 12 25 27 10 ATRS - 25

32 S 25 L - 32 - - ATRS - 32




G TYPE GLAND APPLICATION- For use with SWA Plastic & Rubber sheathed cable. Used in dry indoor condition. Inner ring ensures positive armour clap and earth continuity. FINISH-

* Nickel Plated


Under Armour

Dia. A Max. mm

Overall Dia. B

Max. mm

Armour Wire

Diameter C mm

ISO Entry thread Approx Length From

Shoulder

Hexagon Size

Dia. Length Across Flat

Across Corners

D mm E mm F mm G mm H mm

204 15.8 15.8 0.90/1.25 20 10 24 22.00 24.90 AG - 204

206 21.0 21.0 0.90/1.25 20 10 25 27.00 30.00 AG - 206

254 23.8 23.8 1.25/1.60 25 10 26 31.70 35.70 AG - 254

256 27.2 27.2 1.25/1.60 25 10 26 37.60 42.20 AG - 256

324 33.2 33.2 1.60/2.00 32 10 28 47.30 53.60 AG - 324

326 39.2 39.2 1.60/2.00 40 15 25 48.40 54.60 AG - 326

405 39.9 39.9 1.60/2.00 40 15 25 50.00 57.00 AG - 405

503 51.6 51.6 2.00/2.50 50 15 36 58.00 64.20 AG - 503

505 52.6 52.6 2.00/2.50 50 15 36 65.00 71.20 AG - 505

636 61.0 61.0 2.50 63 15 30 71.00 77.50 AG - 636

753 71.3 71.3 2.50 75 15 40 85.00 95.00 AG - 753

755 78.0 78.0 2.50 75 15 40 98.00 109.20 AG - 755

WIPING GLAND

These are made from heavy duty brass & are available as per the following dimensions




KIT PACKING

16/20-32 inclusive

2-Brass Glands

2- Black PVC Shrouds

2-Galv. Steel Locknuts

2-Brass Earthtags

40-75 inclusive

1-Brass Gland

1-Galv. Steel Locknut

1-Brass Earthtag

PVC SHROUD/SLEEVE

MATERIAL-

Black Polyvinylchloride High Grade

FEATURES-

F 1 Provides additional protection & enhances IP rating the Gland Termination.

2. Effective solution to weather and corrosion protection of a cable gland.

3. Available in same gland size compatible to each size of the cable gland.

4. The arrow end of the sleeve is readily cut with a knife, enabling it to be slipped

over a wide range of cable diameters and assists ease of installations.

EARTH TAG

MATERIAL-

Brass, Aluminum & Copper

FEATURES-

Means of connection or an earth bond-around the cable gland.

Available in various shapes & in all sizes.

Ensure earth continuity between the electrical equipment & the gland.

Can be coated or plated as per Customer Specification

Metric Product Code

M 20 AGA - ET - 20

M 25 AGA - ET - 25

M 32 AGA - ET - 32

M 40 AGA - ET - 40

M 50 AGA - ET - 50

M 63 AGA - ET - 63

M 75 AGA - ET - 75

M 80 AGA - ET - 80

M 90 AGA - ET - 90

M 100 AGA - ET - 100




HEXAGONAL CABLE GLAND WITH METRIC THREAD HEXAGONAL CABLE GLAND WITH PG

THREAD

MATERIAL - Brass

FINISH - Nickel Plated

DESIGN FEATURES - According to DIN 46230

PROTECTION TYPE - IP 54

Sizes For Cables D (mm)

Product Code

M 12 x 1.5 4 - 6 AMG - 12

M 16 x 1.5 2 - 10 AMG - 16

M 20 x 1.5 3 - 14 AMG - 20

M 25 x 1.5 7.5 - 18 AMG - 25

M 32 x 1.5 15 - 25 AMG - 32

M 40 x 1.5 22 - 33 AMG - 40

M 50 x 1.5 31 - 42 AMG - 50

M 63 x 1.5 40 - 51 AMG - 63

ROUND CABLE GLAD WITH METRIC THREAD ROUND CABLE GLAND WITH PG THREAD

MATERIAL - Brass


PROTECTION TYPE - IP 68


Thread Product Code Size For Cables D (mm)

Thread Product Code

M 12 x 1.5 3 - 6 5 ARMG - 12 PG 7 3 - 6.5 5 ARPG - 7

M 16 x 1.5 5 - 9 5 ARMG - 16 PG 9 4 - 8 6 ARPG - 9

M 20 x 1.5 9 - 13 6 ARMG - 20 PG 11 5 - 10 6 ARPG - 11

M 25 x 1.5 11 - 15 7 ARMG - 25 PG 13.5 6 - 12 6.5 ARPG - 13.5

M 32 x 1.5 14 - 20 8 ARMG - 32 PG 16 10 - 14 6.5 ARPG - 16

M 40 x 1.5 18 - 25 8 ARMG - 40 PG 21 13 - 18 7 ARPG - 21

M 50 x 1.5 24 - 32 9 ARMG - 50 PG 29 18 - 25 8 ARPG - 29

M 63 x 1.5 32 - 42 10 ARMG - 63 PG 36 22 - 32 9 ARPG - 36

PG 42 30 - 38 10 ARPG - 42

PG 48 34 - 44 10 ARPG - 48


Product Code

PG 7 4 – 6 APG - 7

PG 9 4 - 10 APG - 9

PG 11 7 - 12.5 APG - 11

PG 13.5 7 - 12.5 APG - 13.5

PG 16 7 - 15 APG - 16

PG 21 9 - 19 APG - 21

PG 29 17- 27 APG - 29

PG 36 23 - 33 APG - 36

PG 42 29 - 39 APG - 42

PG 48 35 - 45 APG - 48




MARINE – USE WATERTIGHT CABLE GLANDS

MATERIAL - Brass

FINISH - Nickel Plated NO. OF PARTS - Body, Clamping Gland, Lock Nut, Ywo Brass Washers, Rubber Thread Seal, Rubber Inner Compression Ring SIZE RANGE - 3/8” to 3”

Pipe Thread Gland ID in MM A

Rubber ID Locknut OD in mm

C

Gland OD in MM D

Total Length

L

Product Code

PF 3/8 10 8 28 22 38 ACG - 10

PF 1/2 15 10 31.5 28 42 ACG - 15

PF 3/4 20 13 37 33.5 46 ACG - 20

PF 1 25 15 45 42 52 ACG - 25

PF 1 1/4 30 24 46 49.5 57 ACG - 30

PF 1 1/2 40 30 63 55 65 ACG - 35

PF 1 1/2 40 34 63 55 65 ACG - 40

PF 2 45 38 77 69 73 ACG - 45

PF 2 50 44 77 69 73 ACG - 50

PF 2 1/2 55 48 96 85 83 ACG - 55

PF 2 1/2 60 54 96 85 83 ACG - 60

PF 3 65 60 112 100 95 ACG - 65

PF 3 70 64 112 100 95 ACG - 70




REDUCERS

MATERIAL - Brass


Size (Metric x PG) Thread d1 (out.) x

Thread d2 (inn)

Product Code Size (Metric x Metric) Thread d1 (out.) x

Thread d2 (inn)

Product Code

M 16 x PG 7 ARD - 167 M 16 x M 12 ARD - 1612

M 20 x PG 9 ARD - 209 M 20 x M 12 ARD - 2012

M 25 x PG 11 ARD - 2511 M 20 x M 16 ARD - 2016

M 25 x PG 13.5 ARD - 25135 M 25 x M 16 ARD - 2516

M 25 x PG 16 ARD - 2516 M 25 x M 20 ARD - 2520

M 32 x PG 16 ARD - 3216 M 32 x M 20 ARD - 3220

M 32 x PG 21 ARD - 3221 M 32 x M 25 ARD - 3225

M 40 x PG 21 ARD - 4021 M 40 x M 25 ARD - 4025

M 50 x PG 29 ARD - 5029 M 40 x M 32 ARD - 4032

M 63 x PG 36 ARD - 6336 M 50 x M 32 ARD - 5032

M 63 x PG 42 ARD - 6342 M 50 x M 40 ARD - 5040

M 63 x M 40 ARD - 6340

M 63 x M 50 ARD - 6350

Size (PG x Metric) Thread d1(out.) x Thread d2 (inn)

Product Code Size (PG x PG) Thread d1(out.) x Thread d2 (inn)

Product Code

PG 9 x M 16 ARD - 916 PG 9 x PG 7 ARD - 97



PG 16 x M 20 ARD - 1620 PG 13.5 x PG 7 ARD - 1357




PG 16 x PG 9 ARD - 169

PG 16 x PG 11 ARD - 1611

PG 16 x PG 13.5 ARD - 16135

PG 21 x PG 11 ARD - 2111

PG 21 x PG 13.5 ARD - 21135

PG 21 x PG 16 ARD - 2116

PG 29 x PG 16 ARD - 2916

PG 29 x PG 21 ARD - 2921

PG 36 x PG 21 ARD - 3621

PG 36 x PG 29 ARD - 3629

PG 42 x PG 29 ARD - 4229

PG 42 x PG 36 ARD - 4236

PG 48 x PG 36 ARD - 4836

PG 48 x PG 42 ARD - 4842




ENLARGER

MATERIAL - Brass


Size (Metric x Metric) Thread d1 (out.) x Thread

d2 (inn)

Product Code Size (Metric x PG) Thread d1 (out.) x Thread d2

(inn)

Product Code

M 12 x M 16 AEN - 1216 M 12 x PG 7 AEN - 127

M 16 x M 20 AEN - 1620 M 16 x PG 9 AEN - 169

M 20 x M 25 AEN - 2025 M 20 x PG 11 AEN - 2011

M 25 x M 32 AEN - 2532 M 20 x PG 13.5 AEN - 20135

M 25 x M 40 AEN - 2540 M 20 x PG 16 AEN - 2016

M 32 x M 40 AEN - 3240 M 25 x PG 21 AEN - 2521

M 32 x M 50 AEN - 3250 M 32 x PG 29 AEN - 3229

M 40 x M 50 AEN - 4050 M 40 X PG 36 AEN - 4036

M 50 x M 63 AEN - 5063 M 50 x PG 42 AEN - 5042

M 63 x PG 48 AEN - 6348

Size (PG x PG) Thread d1 (out.) x Thread d2 (inn)

Product Code

PG 7 x PG 9 AEN - 79

PG 9 x PG 11 AEN - 911

PG 9 x PG 13.5 AEN - 9135

PG 11 x PG 13.5 AEN - 11135

PG 11 x PG 16 AEN - 1116

PG 13.5 x PG 16 AEN - 13516

PG 13.5 x PG 21 AEN - 13521

PG 16 x PG 21 AEN - 1621

PG 21 x PG 29 AEN - 2129

PG 29 x PG 36 AEN - 2936

PG 36 x PG 42 AEN - 3642

PG 42 x PG 48 AEN - 4248

STOP PLUG

MATERIAL - Brass Hexagonal Round


Sizes Product Code Sizes Product Code

M 12 ASP - 12 PG 7 ASP - 7

M 16 ASP - 16 PG 9 ASP - 9

M 20 ASP - 20 PG 11 ASP - 11

M 25 ASP - 25 PG 13.5 ASP - 13.5

M 32 ASP - 32 PG 16 ASP - 16

M 40 ASP - 40 PG 21 ASP - 21

M 50 ASP - 50 PG 29 ASP - 29

M 63 ASP - 63 PG 36 ASP - 36

PG 42 ASP - 42

PG 48 ASP - 48

*Add suffix “H” to Product Code for Hexagonal Brass Stop Plug.




LOCK NUTS

MATERIAL - Brass


Sizes Product Code Sizes Product Code

M 12 ALN-12 PG 7 ALN - 7

M 16 ALN - 16 PG 9 ALN - 9

M 20 ALN - 20 PG 11 ALN - 11

M 25 ALN - 25 PG 13.5 ALN – 13.5

M 32 ALN – 32 PG 16 ALN – 16

M 40 ALN – 40 PG 21 ALN – 21

M 50 ALN – 50 PG 29 ALN – 29

M 63 ALN - 63 PG 36 ALN – 36

PG 42 ALN – 42

PG 48 ALN - 48

SERATED WASHERS

BOLTED GLAND




O RING

TINNED BRASS LINE TAP

‘ACE’ manufactures a vast range of line taps to meet the materials & dimensional specifications laid by different international standards. Brass line taps are made with high tensile brass as per BS 2874 - CZ 112. Threads are formed by rolling process giving the nut extra clamping force. Pressure pads are made from extruded bars (not cast), preventing the pads from cracking. Brass line taps are manufactured in passivated natural brass with electro tinned finish. They are also supplied in high conductivity copper.

Size (mm2) A B CA/F DA/F E Product Code

6 19.85 4.00 12.70 13.35 4.80 ASBC - 6

10 26.75 4.70 12.70 19.00 5.60 ASBC - 10

16 26.00 5.70 12.70 19.00 5.60 ASBC - 16

25 28.00 7.30 16.00 19.00 5.60 ASBC - 25

35 35.00 7.80 18.50 24.00 6.35 ASBC - 35

50 42.00 9.70 24.10 27.20 8.65 ASBC - 50

70 44.50 11.50 24.10 27.20 8.65 ASBC - 70

95 50.00 14.40 26.50 35.40 9.40 ASBC - 95

120 57.50 16.20 30.00 35.40 12.00 ASBC - 120

120 57.50 16.20 30.00 35.40 12.00 ASBC - 150

185 57.50 18.20 31.75 38.00 12.00 ASBC - 185

240 72.50 22.00 40.00 48.20 14.25 ASBC - 240

300 72.50 24.00 42.00 50.00 14.25 ASBC - 300

400 76.50 26.00 48.00 56.00 16.00 ASBC - 400

500 80.00 30.00 55.00 65.00 16.00 ASBC - 500




BRASS NEUTRAL LINK / BAR & CONNECTOR

„ACE‟ manufactures a vast range of terminal bars / neutral links for the electrical industry. Besides the available standard sizes,

we also manufacture as per the customers specifications.

Cross Section (MM)

Cross Hole DIA

Pitch Thread Product Code

9 x 7 5.6 8.0 M5 AN 97

11 x 8 6.0 7.5 M5 AN 118

11 x 8 7.0 8.5 1/4" UNF AN 1188

12.7 x 8 7.0 8.5 1/4" UNF AN 1278

12.7 x 12.7 7.0 8.5 1/4" UNF AN 1212

BRASS EARTHING TERMINALS

Size (MM) Finish Product Code

4 x 16 DULL TIN PLATING (BRITISH) ABE - 4D

4 x 16 BRIGHT ZINC FINNISH (IMPORTED) ABE - 4B

1 x 25 + 3 x 16 DULL TIN PLATING (BRITISH) ABE - 2516

8 x 16 DULL TIN PLATING (BRITISH) ABE - 816D

8 x 16 BRIGHT ZINC FINNISH (IMPORTED) ABE - 816B

2 x 25 + 6 x 16 DULL TIN PLATING (BRITISH) ABE - 2516D

2 x 25 + 6 x 16 BRIGHT ZINC FINNISH (IMPORTED) ABE - 2516B

TABLE OF CONTENT Glands.pdf · 7) A2 Industrial Cable Gland 8) TRS Cable Gland 9) G Type Gland 10)...

Documents

Transcript of TABLE OF CONTENT Glands.pdf · 7) A2 Industrial Cable Gland 8) TRS Cable Gland 9) G Type Gland 10)...