Table of Contents Knoll Office Tables · Cascade Edge Top Tables Four-star base, fixed and...

Table of Contents

Introduction Knoll and Sustainable Design 4Introduction to Knoll Office Tables 5

AutoStrada AutoStrada Basics 6AutoStrada Materials and Details 7AutoStrada Finishes 8AutoStrada Paint and Laminate Finishes Matrix 9Tables 10Table desks 12Worksurface support 14

Crinion Open Table Introduction 15Specifications 16Crinion Open Table Finishes 17Worksurfaces with center hinged power access 18Worksurfaces with edge grommet 19Worksurfaces with cord drop 20End counters 21Extended end counters 22File tops 24Complete base assemblies fixed height 24� D dual 25Complete base assemblies fixed height 24� D single sided 26Complete base assemblies fixed height 30� D dual 27Complete base assemblies fixed height 30� D single sided 28Complete base assemblies adjustable height 30� D dual 29Complete base assemblies adjustable height 30� D single sided 30Complete base assemblies fixed height 36� D dual 31Complete base assemblies fixed height 36� D single sided 32Complete base assemblies adjustable height 36� D dual 33Complete base assemblies adjustable height 36� D single sided 34Top channels 35Beams for single sided or dual tables 36Beams for dual tables 37Beams for single sided tables 38End legs, intermediate leg sets for dual tables 39End legs, intermediate leg sets for single sided tables 41End panels for dual tables and single sided tables, painted 42End panels for dual tables and single sided tables, laminate and veneer 43Beam trusses 44Worksurface support 45Modular Raceway 47Hardwire Raceway 53Cable tray and cable clips 54Beam mounted cable trays and cable baskets 55Center screens 56Shelves, adapters and buttresses for slatwall screens 58Side screens 59Return screens 61Dual end screens 63Single sided end screen 65Frameless glass Add up 67Morrison Network privacy screens 68

Knoll Office Tables

PLTAB01101

Copyright � 2010 Knoll, Inc.All rights reserved.All prices effective 2/15/2009.

Reff General Specifications 69Optional edge details 70Reff finish options 71Reff Original finish options 73Conference room tops 74Waterfall edge 78Optional edge conference room tops 80Bases, 261/2� high 82Bases, 283/8� high 85

Magnusson Construction and Shipping Information 88Meeting tables 89Conference tables 90

Interaction Interaction Base Options 91Interaction Table Planning 93Ordering Interaction Tables 97Interaction Core Finishes 98Interaction Legacy Finishes 99Four-star base, fixed and adjustable height 100C-leg tables, fixed and adjustable height, linking tops 103C-leg tables, Counterforce™ corners and split-tops 104T-leg and column base tables, file top 106

Morrison System Top Tables Four-star base, fixed and adjustable height 108C-leg tables, fixed height 109C-leg tables, manually adjustable 110C-leg tables, crank adjustable 111C-leg tables, Counterforce™ adjustable 112T-leg tables 113C-leg tables, split top 114C-leg tables, keyboard cutout 115C-leg tables, top crank adjustable 116C-leg tables, electric adjustable 117

Equity System Top Tables Four-star base, fixed and adjustable height 118C-leg tables, fixed height 120C-leg tables, manually adjustable 121C-leg tables, crank adjustable 122C-leg tables, Counterforce™ adjustable 123T-leg tables 124C-leg tables, split-top 125C-leg tables, keyboard cutout 126C-leg tables, top crank adjustable 127C-leg tables, electric adjustable 128

Reff System Top Tables Four-star base, fixed and adjustable height 129C-leg tables, fixed height 130C-leg tables, manually adjustable 131C-leg tables, crank adjustable 132C-leg tables, Counterforce™ adjustable 133T-leg tables 134C-leg tables, split top 135C-leg tables, keyboard cutout 136C-leg tables, top crank adjustable 137C-leg tables, electric adjustable 138

Dividends Horizon System TopTables

Four-star base, fixed and adjustable height 139C-leg tables, fixed height 140C-leg tables, manually adjustable 141C-leg tables, crank adjustable 142C-leg tables, Counterforce™ adjustable 143T-leg tables 144C-leg tables, split-top 145C-leg tables, keyboard cutout 146C-leg tables, top crank adjustable 147C-leg tables, electric adjustable 148

Knoll Office Tables

2

Cascade Edge Top Tables Four-star base, fixed and adjustable height 149C-leg tables, fixed height 150C-leg tables, manually adjustable 151C-leg tables, crank adjustable 152C-leg tables, Counterforce™ adjustable 153C-leg tables, top crank adjustable 154C-leg tables, electric adjustable 155

Interaction Bases Only Interaction bases 156Accessories Accessories 159Currents Introduction to Currents 160

Currents Color Program 163Currents Legacy Finishes 164Worksurface supports 165Desks 166Desks with service beam 174Above-desk storage and lighting for desks 182Privacy screens for desks 183Power, data and communications components for desks 185Worktables 189

Upstart Introduction to Upstart 192Original Upstart Planning Examples 193Knoll Color Program 195Upstart Legacy Finishes 196Upstart Tables 197Plannable Upstart Tables 202Accessories 211Upstart Privacy Screens 212Plannable Upstart Privacy Screens 213Upstart Storage 215

Equity Equity finishes 216Tables 217120° 219

Dividends Horizon Y Leg Tables 220X Base Tables 227Table Supports 232Conference Tables 233

Alpha-Numeric Index 237

Selling Policy 246

KnollKey Lock Program 248

General Ordering Information 249

Knoll Office Tables

3

Knoll and Sustainable Design

Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.

Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and Chicago Climate Exchange (CCX�).

In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.

1. Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement

solutions to some of the world’s most pressing challenges, including environmental change.

• Knoll is a member of the Chicago Climate Exchange, which promotes greenhouse gas reduction through the trading of credits earnedfor reducing emissions.

• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.

2. Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw

materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.

• Knoll has partnered with The Green Standard.org to develop an affordable, universal ISO-compliant computer-based LCA tool thatcan be used by the entire contract furniture industry and is partnering on the development of an Environmental Product DeclarationSystem (EPDs) for Knoll products. EPDs are verified documents containing LCA results and additional environmental performanceinformation about a product.

3. Setting Industry Standards• Knoll partners with MTS (The Institue for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable

Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.

• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.

• Knoll also participates in an ongoing BIFMA (Business and Institutional Furniture Manufacturers Association) initiative to establishlevel ™ sustainability standards for the contract furniture industry.

• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.

For more information about Knoll and sustainable design, visit knoll.com/environment.

4

Introduction to Knoll Office Tables

The following Price List pages are acompilation of Knoll office tables.The product information contained inthis Price List reflects the sameproduct information contained ineach System’s individual Price List.For example, the Equity tablescontained in this Price List can alsobe found in the Equity Price List. Forelectronic specification, discounting,lead times, and additional productinformation, please refer to eachproduct’s individual Price List.

For KnollStudio tables, please referto the KnollStudio Price List.

Knoll Office Tables

5

AutoStrada Basics

IntroductionWith a commitment to innovationand modern aesthetics, Knoll sets thestandard for the environment inwhich people work. AutoStrada isone of the most comprehensive officeconcepts to be developed by Knoll.Evolving workplace needs are metwith innovative design, from privateoffices to collaborative spaces forteam interaction.

AutoStrada addresses any officecombination with a consistentaesthetic of high quality materialsand carefully detailed design.Whether an office requires ahigh-performance open plan system,refined architectural case goods,progressive private office furniture,or a collaborative ‘‘big table’’concept, AutoStrada provides asolution.

AutoStrada is a planning approachthat combines furniture and interiorarchitecture for both open plan andprivate offices spaces.

AutoStrada is a premium, one-sourcedesign.

AutoStrada is the definition of themost advanced technologymanagement capabilities.

AutoStrada is modern. It is absolutedesign with a strong, basic designpremise.

The Planning ModelsFour AutoStrada planning modelsoffer one set of continuous,intelligent, solutions-orientedcapabilities.

Four ways AutoStrada redefinesspace:• Spine-based planning• Storage-anchored planning• Collaborative table-based

planning• Architectural office planning

Any one environment could includesolutions provided by any mix or allof the four planning models. Diverseplanning models meet cross-culturalworkplace environments everywhere.

AS1 AutoStrada spine basedplanningAutoStrada spine based planningprovides wall-like architectural orderto office interiors and offers highperformance technological support.The spine supports continuousoff-module attachment ofworksurfaces, storage components,KnollExtra accessories, andperpendicular linkable screens orpanels to define workstations. Thespine also manages and distributespower and communicationsthroughout clusters of workstations,enabling convenient outlets at deskheight and unobstructed access tocabling.

Spines can be built to any one footincrement of length and can befreestanding with outriggers tosupport cantilevered worksurfacesand overhead storage. Spines mayalso be integrated with attachedpanels or screens for support andenclosure. T-ends enable the spine toextend to absorb the dimensionalgain of attached panels.

Spine covers include veneer,laminate, dry-erase marker, tackablefabric, integral shelves, slat wall andintegral cable tray surfaces. Spinesare available in threehorizons--39�H, 48�H and 64�H--and may be fitted with framelessglass add ups for additional privacyabove any of four crown profiles.

Linkable screens are available intackable upholstered or glazedpanels and windows, with a completerange of connectors that also supportworksurfaces and storage.

AS2 AutoStrada storage anchoredplanningAutoStrada storage anchoredplanning redefines the open officearchitecture with aesthetic andfunctional alternatives toconventional panel-based systems.Storage anchored planning beginswith the anchor cabinet to whicheither AutoStrada panels or wood orlaminate surrounds are attached tocreate individual or shared workareas. Storage anchored planningcombines the performance of systemsfurniture with elegant details morelike custom millwork.

AutoStrada panels feature a laminateor veneer tiled grid to the floor, withaluminum reveals between tiles onthe exterior, and fabric or fabric andslat wall surfaces on the inside of theworkstation. Interior base racewaydistributes power andcommunications throughout a clusterwith outlets only on the inside of thepanels. AutoStrada panel heightsenable seated access (42�H), seatedprivacy (49�H) or standing privacy(64�H). Frameless glass add ups canbe added to panels for additionalprivacy. Connectors supportworksurfaces, overhead storage orshelves and KnollExtra papermanagement and technology supporttools.

AutoStrada surrounds, in veneer orlaminate surface, are ideal for raisedfloor environments and a visualalternative to panels. Mediansurrounds or median storage form thebackbone to which bridges andanchor cabinets are attached.Medians include a back panel, one ortwo end gables, a counter surface anda worksurface or shelves. Bridgesinclude a back panel andworksurface. AutoStrada surroundstypically describe workstationboundaries at a 49� horizon.

AS3 AutoStrada wall basedplanningAutoStrada wall based planningintegrates freestanding and wallsupported storage, desks and tablesto build distinctive workspaces inprivate offices and walledcollaborative areas.

AutoStrada Applied Walls addsystems performance to built walls,enabling various surface materialsand off module support for shelves,overheads and worksurfaces.Applied wall is either 69�H or 84�H,in any 6� increment of width.Horizontal channels containinterchangeable inserts like veneer,marker surface, fabric, glass, slatwall or recessed covers, and acceptbrackets for a variety of accessoriesat any point. Wall frames transfermost of the supported load directly tothe floor.

AutoStrada overheads andtackboards can also be directlyattached to most built walls.Freestanding AutoStrada cabinets forprivate offices are available in 70�and 84� horizons.

AS4 AutoStrada collaborativeplanningAutoStrada collaborative planning isbased on the Crinion Open Table,which creates open sharedworkspaces for groups from two toten or more at a continuousworksurface ‘‘bench’’. Designed tosupport teams of people CrinionOpen Table is ideal for tradingrooms, libraries and conferencerooms.

Crinion Open Table offers a uniquealternative to traditionalworkstations, with continuouscantilevered worksurfaces,unobstructed kneespace, convenient,capable power and communicationsdistribution, and optional desktopprivacy screens. An extremely strongstructure supports worksurfaces upto 36�d each side and virtuallyunlimited in length.

Crinion Open Table may becomplemented with AutoStradametal or wood storage, or Calibrefiles and cabinets as parallel filebanks or as returns.

Knoll Office Tables

6

AutoStrada Materials and Details

MaterialsAutoStrada offers a range ofexceptional materials and finishes,including premium grade hardwoodveneers, Techwood, laminate, clearanodized aluminum, andarchitectural glass.

Veneers are all hand selected to bestshowcase the beauty of natural grain.Every effort is made to ensure thatKnoll veneers are the best that canbe sourced in quality of color,consistency and size. Naturalvariations of wood are not consideredto be defects. The natural process ofcolor change in real wood products ispart of the beauty and uniquecharacter of the material. Knollexpects wood to patina over time.

Techwood is a genuine wood veneerwhich has been enhanced bytechnology to provide color and grainconsistency.

High recycled content aluminum isused in the manufacture of aluminumcomponents.

High-pressure laminate surfacematerials have been selected fortheir durability and lowmaintenance.

FSC (Forest Stewardship Council)certified materials are available byrequest.

Construction detailsAll AutoStrada worksurfaces are 11/4�thick and are a 3 ply solidconstruction. Worksurfaces areavailable in rectilinear and wedgeshapes. The distinctive 3/8� taperededge can be specified on just theuser side or also on the approachside. Worksurfaces can be specified‘‘full depth’’ with or withoutgrommets, or with a 3/8� cord dropalong the back with a centered edgegrommet.

Worksurfaces appear to ‘‘float’’ 1�above lower storage components.Pedestals and legs can support aworksurface height of 281/4�H(typically in open plan) or 295/8� (inprivate offices). The higherworksurface height requires woodpedestals equipped with cabinet feet.

Pedestals and overhead storage areavailable in either metal or woodcase. Wood pedestals have fullextension file drawer slides withbottom-loadable steel floor and 3/4extension slides all woodconstruction box drawers.

Wood or laminate case cabinets withhinged doors and adjustable shelvesrequire doors to be removed to adjustshelving; alternatively a specialrequest 170° hinge package isavailable to retrofit cabinets in thefield.

Metal pedestals and Reuter overheadstorage cabinets with flat front aredurable steel construction withpainted, laminate or veneer drawerfronts.

Metal pedestals feature full widthprotruding aluminum pull. Metalpedestals have all full extensionpersonal, data and file drawer slides.

Wood cases incorporate 3 plyconstruction and components arefinished on all sides. Core material is45lb density particleboard. Wooddrawers feature dovetail joinerydetails. File drawers have steel floorand are bottom loadable. Wooddrawers feature full width anodizedaluminum recessed or protrudingpull. File drawers include file bars tosupport letter or legal suspendedfiling in either direction.

Freestanding private office cabinetsare supported by cylindricalextruded aluminum feet which matchan optional worksurface standoffdetail.

Spine, linkable screens, panels, legsand metal storage offer 1� or greaterlevelling capacity. Wood storage has1/2� levelling.

Cable managementAutoStrada incorporates discreet andconcealed wire management as wellas four or six circuit powerdistribution in all four planningmodels, supporting low to very hightechnology requirements. Storageanchored surrounds, designed forraised floor environments, are theonly planning type that does not havepower distribution capability.

Leg designAutoStrada support legs are a refinedshape in clear anodized aluminumfinish. Legs feature either lockablecasters or a unique glide sleeve thatallows leveling without exposed glidethreads. A pair of straight legs or one9� wide leg can support one end of aworksurface when the other end isspine-supported, panel-supported orjoined to a perpendicularworksurface with AT2TB brackets. Ifdistance between support spans over48�, additional support is required.

Two pairs of straight legs may also bespecified to create a freestandingtable in combination with anAutoStrada worksurface not toexceed 72� x 30� with acorresponding stiffener.

LocksAll pedestals and cabinets withdrawers are supplied with a ganglockmechanism in place. In addition,cabinets 30� wide and over withdrawers have an interlock anti-tipfeature to prevent the opening of asecond drawer when one is alreadyopen. Drawer fronts and door frontswhere applicable are routed toreceive the lock itself. Keyinginstructions for key alike mustaccompany all orders and are fieldinstalled. Products are shipped fromthe factory with random locks or lockplugs for key-alike orders.

Representative DimensionsAll dimensions in this price list arenominal and for representativepurposes only. For specific builddimensions please consultspecification planning tools orcontact your Customer Servicerepresentative.

Line drawings in this price list arestrictly for quick productidentification.

Knoll Office Tables

7

Aut

oStr

ada

AutoStrada Finishes

Finishes

L - LaminateMatching edge band unless notedotherwise117 Soft Grey118 Bright White114 Folkstone Grey111 Jet Black119 Pumice121 Micro Grey with 114

Folkstone grey edge band122 Brushed Sand with 119

Pumice edge band123 Brushed Grey with 128 Fog

edge band128 Fog129 Micro Sand with 119 Pumice

edge band124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut

V1 - Techwood Closed PoreY316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY851 Black OakY811 NaturalY821 Blond MapleY831 Light Cherry

V2 – Natural veneerV312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown Cherry(all above V2’s are flat cut)

V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown OakY439 Straight Anigre(all V2 Oaks are rift cut)

V3 – Exotic veneerV512 Figured AnigreV514 MakoreV515 Figured SycamoreV513 Graphite Oak

(rift cut)V517 Natural Sapele(all V3s are quarter cut)

PaintP1111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey

P2611 Beige Mist Metallic612 Medium Metallic Grey

P3118 Bright White613 Silver

AnodizedAA Anodized Aluminum

PlatedPT Brushed Pewter

Glass G1TEMP Clear Tempered

Architectural Glass G2GL6 Block MatrixGL13 Powder

Mixed Finishes: (where applicablefor work surfaces only)To order mixed finishes, enter fourdigit finish code as follows:

Use 2 digit prefix to indicate surfacefinish (laminate)

11 Jet Black14 Folkstone Grey17 Soft Grey18 Bright White19 Pumice21 Micro Grey22 Brushed Sand23 Brushed Grey28 Fog29 Micro Sand

Use 2 digit suffix to indicate edgefinish (wood)

12 for V31216 for V316, Y316Y9 for Y319Y3 for Y32326 for Y32627 for Y32729 for Y32943 for V43345 for V41546 for V43647 for V41748 for V41852 for V51253 for V51354 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V427

Example:For a Micro Grey laminate surfacewith Bronzed Cherry edge, enterfinish code 2112

For a Jet Black laminate surfacewith Light Maple edge, enter finishcode 1116

Knoll Office Tables

8

AutoStrada Paint and Laminate Finishes Matrix

All standardPaint Finishes

AA or all paintsexcept Silver

LaminateHorizontalSurfaces

Laminate VerticalSurfaces

AnodizedAluminum Only

AS1 Spine Based standard crown covers spine base trim covers worksurfaces structural base coversstructural base covers slat wall covers tables access covers

outlet covers integral shelves fronts for metalpedestals

spine connectors flat crown covers fronts for Reuteroverheads

metal pedestals andfronts

flat crown covers box shelves

Reuter cases and fronts straight legswide legs

pullsAS2 Storage Anchored slat wall, panel panel top trim worksurfaces all laminate pedestals top trim wider than 96�

panel raceway covers panel reveals anchor cabinetsstorage reveals medians

pulls bridgestiles, panels

all laminate overheadsAS3 Applied Wall &private officecomponents

wall covers horizontal channelsup to 96�

worksurfaces wall covers horizontal channelswider than 96�

coat hook slat wall covers tables freestanding storagepicture hook recess covers applied wall shelves wall hung overheads

bookends end trimcable tray

marker traydisplay shelf

shelf platformsAS4 Crinion Open Table end legs hinged access worksurfaces, tapered

edge and post formedbeams

intermediate legs top channelup to 96�

top channellonger than 96�

cantilevers screen frames

Finishcode Finish name

Paintgrade

All standardPaint Finishes

AA or all paintsexcept Silver

LaminateHorizontalSurfaces

Laminate VerticalSurfaces

AnodizedAluminum Only

611 Beige Mist Metallic P2 • •118 Bright White P3 • • • •112 Brown P1 • •123 Brushed Grey �

122 Brushed Sand �

113 Dark Grey P1 • •128 Fog • •114 Folkstone Grey P1 • • • •111 Jet Black P1 • • • •115 Medium Grey P1 • •612 Medium Metallic Grey P2 • •121 Micro Grey �

129 Micro Sand �

119 Pumice • •116 Sandstone P1 • •613 Silver P3 •117 Soft Grey P1 • • • •

812 Easy Grey*813 Trim Grey*AA Anodized Aluminum • •LW Markerboard White **

Notes:� All laminates have matching edge bands except:

123 Brushed Grey has 128 Fog edge122 Brushed Sand has 119 Pumice edge121 Micro Grey has 114 Folkstone grey edge129 Micro Sand has 119 Pumice edge

* Easy Grey and Trim grey integral colors only available forCompact crown coversLinkable screen trimLinkable screen top capsSpine end connector top caps

** Markerboard white is available only on AS1 spine access covers, AS3 Applied Wall covers and AS4 screens.

Knoll Office Tables

9

Aut

oStr

ada

Tableswith straight legs

description h w d dia. pattern no. L M V1 V2 V3

Square table, tapered 4 sides 281/4� 42� 42� ATA1T44242( )( )( )( )( ) $1,479. $1,640. $1,640. $1,672. $1,937.281/4� 48� 48� ATA1T44848( )( )( )( )( ) 1,601. 1,680. 1,680. 1,726. 2,058.

Rectangular table, tapered 4 sides 281/4� 48� 30� ATA1T44830( )( )( )( )( ) 1,509. 1,626. 1,626. 1,649. 1,878.281/4� 60� 30� ATA1T46030( )( )( )( )( ) 1,591. 1,715. 1,715. 1,750. 2,026.281/4� 72� 30� ATA1T47230( )( )( )( )( ) 1,671. 1,749. 1,749. 1,791. 2,115.281/4� 72� 36� ATA1T47236( )( )( )( )( ) 1,710. 1,779. 1,779. 1,833. 2,212.

Round table, tapered edge 281/4� 36� ATA1R36( )( )( )( )( ) 1,534. 1,759. 1,591. 1,642. 1,863.281/4� 42� ATA1R42( )( )( )( )( ) 1,606. 1,792. 1,628. 1,692. 1,980.281/4� 48� ATA1R48( )( )( )( )( ) 1,736. 1,833. 1,673. 1,749. 2,112.

Order Code

Example: ATA1T44242V27CV316AA

A AutoStradaTA Table1 Generation 1T4 Tapered edge 4 sides42 42� wide42 42� deepV Surface type, veneer27 27� leg heightC CasterV316 Finish top, MapleAA Finish, leg

Specification Information

To order please specify patternnumber including:1. Width2. Depth3. Surface type

L = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3

4. Leg height (to underside ofsurface)27 = 27�h28 = 283/8�h (add $30 for thisoption)30 = 301/8�h (add $66 for thisoption)

5. Leg typeC = with CasterG = with Glide

6. Finish, SurfaceLaminate, Mixed, V1, V2 or V3finish

7. Finish, EdgeMust be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish

8. Finish, LegAnodized aluminum finish orpainted finish option excludingsilver.

See AutoStrada for finish optionsapplicable.

Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.

Grommets are not optional fortables.

Stiffener included with rectangulartables 60�w and over.

Application Notes

AutoStrada tables include fourstraight legs with glides or casters.

Tables can be specified to surfaceheight of:283/8� : specify 27� leg.295/8� : specify 28� leg.311/2� : specify 30� leg.

Knoll Office Tables

10

Tableswith L-legs

description h w d dia.legheight pattern no. L M V1 V2 V3

Square table, tapered 4 sideswith L-legs

283/8� 42� 42� 27� ATAT4LL424227(L/M/V)( )( )( ) $2,145. $2,383. $2,383. $2,432. $2,797.283/8� 48� 48� 27� ATAT4LL484827(L/M/V)( )( )( ) 2,158. 2,398. 2,398. 2,447. 2,814.293/4� 42� 42� 283/8� ATAT4LL424228(L/M/V)( )( )( ) 2,149. 2,388. 2,388. 2,437. 2,803.293/4� 48� 48� 283/8� ATAT4LL484828(L/M/V)( )( )( ) 2,185. 2,427. 2,427. 2,477. 2,849.

Round table, tapered edgewith L-legs

283/8� 36� 27� ATARLL3627(L/M/V)( )( )( ) 2,088. 2,320. 2,320. 2,367. 2,722.283/8� 42� 27� ATARLL4227(L/M/V)( )( )( ) 2,094. 2,327. 2,327. 2,374. 2,730.283/8� 48� 27� ATARLL4827(L/M/V)( )( )( ) 2,105. 2,339. 2,339. 2,387. 2,745.293/4� 36� 283/8� ATARLL3628(L/M/V)( )( )( ) 2,123. 2,359. 2,359. 2,407. 2,768.293/4� 42� 283/8� ATARLL4228(L/M/V)( )( )( ) 2,129. 2,366. 2,366. 2,414. 2,776.293/4� 48� 283/8� ATARLL4828(L/M/V)( )( )( ) 2,141. 2,378. 2,378. 2,427. 2,791.

Rectangular table desk, tapered 4 sideswith L-legs

283/8� 48� 30� 27� ATDT4LL483027(L/M/V)( )( )( ) 1,959. 2,177. 2,177. 2,221. 2,554.283/8� 60� 30� 27� ATDT4LL603027(L/M/V)( )( )( ) 1,994. 2,216. 2,216. 2,261. 2,600.283/8� 72� 30� 27� ATDT4LL723027(L/M/V)( )( )( ) 2,012. 2,235. 2,235. 2,281. 2,623.283/8� 72� 36� 27� ATDT4LL723627(L/M/V)( )( )( ) 2,029. 2,255. 2,255. 2,301. 2,646.293/4� 48� 30� 283/8� ATDT4LL483028(L/M/V)( )( )( ) 2,038. 2,265. 2,265. 2,311. 2,658.293/4� 60� 30� 283/8� ATDT4LL603028(L/M/V)( )( )( ) 2,091. 2,324. 2,324. 2,371. 2,727.293/4� 72� 30� 283/8� ATDT4LL723028(L/M/V)( )( )( ) 2,135. 2,373. 2,373. 2,421. 2,784.293/4� 72� 36� 283/8� ATDT4LL723628(L/M/V)( )( )( ) 2,171. 2,412. 2,412. 2,461. 2,830.

Order Code

Example: ATAT4LL424227V316AA

A AutoStradaTA TableT4 Top tapered 4 sidesLL L-Leg42 42� wide42 42� deep27 Leg heightV Surface type, veneerV316 Finish top, MapleAA Finish, leg


To order please specify patternnumber including:1. Width2. Depth3. Leg height (to underside of

surface)27 = 27�h28 = 283/8�h

4. Surface typeL = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3


6. Finish, Edge (if applicable)Must be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish




Grommets are not optional fortables.

Worksurface stiffener included withrectangular table desks 60�w andover.

Application Notes

AutoStrada table desks include fourL-legs with glides.

Tables can be specified to overallsurface height of:283/8� : specify 27� leg.295/8� : specify 28� leg.

Knoll Office Tables

11

Aut

oStr

ada

Table deskswith L-legs

description h w dlegheight pattern no. L M V1 V2 V3

Rectangular table desk withL-legs and full front modesty

283/8� 48� 30� 27� ATDT1LFM483027(L/M/V)( )( )( )( )( ) $2,412. $2,680. $2,680. $2,735. $3,145.283/8� 60� 30� 27� ATDT1LFM603027(L/M/V)( )( )( )( )( ) 2,448. 2,720. 2,720. 2,775. 3,191.283/8� 72� 30� 27� ATDT1LFM723027(L/M/V)( )( )( )( )( ) 2,477. 2,752. 2,752. 2,808. 3,229.283/8� 72� 36� 27� ATDT1LFM723627(L/M/V)( )( )( )( )( ) 2,494. 2,771. 2,771. 2,828. 3,252.293/4� 48� 30� 283/8� ATDT1LFM483028(L/M/V)( )( )( )( )( ) 2,543. 2,825. 2,825. 2,883. 3,315.293/4� 60� 30� 283/8� ATDT1LFM603028(L/M/V)( )( )( )( )( ) 2,547. 2,830. 2,830. 2,888. 3,321.293/4� 72� 30� 283/8� ATDT1LFM723028(L/M/V)( )( )( )( )( ) 2,556. 2,840. 2,840. 2,898. 3,333.293/4� 72� 36� 283/8� ATDT1LFM723628(L/M/V)( )( )( )( )( ) 2,582. 2,869. 2,869. 2,928. 3,367.

Rectangular table desk withL-legs and partial front modesty

283/8� 48� 30� 27� ATDT1LPM483027(L/M/V)( )( )( )( )( ) 2,313. 2,571. 2,571. 2,623. 3,016.283/8� 60� 30� 27� ATDT1LPM603027(L/M/V)( )( )( )( )( ) 2,318. 2,575. 2,575. 2,628. 3,022.283/8� 72� 30� 27� ATDT1LPM723027(L/M/V)( )( )( )( )( ) 2,327. 2,585. 2,585. 2,638. 3,034.283/8� 72� 36� 27� ATDT1LPM723627(L/M/V)( )( )( )( )( ) 2,353. 2,615. 2,615. 2,668. 3,068.293/4� 48� 30� 283/8� ATDT1LPM483028(L/M/V)( )( )( )( )( ) 2,411. 2,678. 2,678. 2,733. 3,143.293/4� 60� 30� 283/8� ATDT1LPM603028(L/M/V)( )( )( )( )( ) 2,415. 2,683. 2,683. 2,738. 3,149.293/4� 72� 30� 283/8� ATDT1LPM723028(L/M/V)( )( )( )( )( ) 2,424. 2,693. 2,693. 2,748. 3,160.293/4� 72� 36� 283/8� ATDT1LPM723628(L/M/V)( )( )( )( )( ) 2,450. 2,722. 2,722. 2,778. 3,195.

Rectangular table desk with L-legsand full front&side modesties

283/8� 48� 30� 27� ATDT1LFS483027(L/M/V)( )( )( )( )( ) 2,987. 3,319. 3,319. 3,387. 3,895.283/8� 60� 30� 27� ATDT1LFS603027(L/M/V)( )( )( )( )( ) 3,027. 3,363. 3,363. 3,432. 3,947.283/8� 72� 30� 27� ATDT1LFS723027(L/M/V)( )( )( )( )( ) 3,062. 3,403. 3,403. 3,472. 3,993.283/8� 72� 36� 27� ATDT1LFS723627(L/M/V)( )( )( )( )( ) 3,089. 3,432. 3,432. 3,502. 4,027.293/4� 48� 30� 283/8� ATDT1LFS483028(L/M/V)( )( )( )( )( ) 3,076. 3,417. 3,417. 3,487. 4,010.293/4� 60� 30� 283/8� ATDT1LFS603028(L/M/V)( )( )( )( )( ) 3,115. 3,461. 3,461. 3,532. 4,062.293/4� 72� 30� 283/8� ATDT1LFS723028(L/M/V)( )( )( )( )( ) 3,151. 3,501. 3,501. 3,572. 4,108.293/4� 72� 36� 283/8� ATDT1LFS723628(L/M/V)( )( )( )( )( ) 3,177. 3,530. 3,530. 3,602. 4,142.

Order Code

Example: ATDT1LPS483027VGV316AA111

A AutoStradaTD Table deskT1 Top tapered 1 side

(user only)L L-LegFM Full front modesty48 48� wide30 30� deep27 Leg heightV Surface type, veneerG GrommetV316 Finish top, MapleAA Finish, leg111 Grommet finish


To order please specify patternnumber including:1. Full or partial modesty (and end

panels when applicable)2. Width3. Depth4. Leg height (to underside of

surface)27 = 27�h28 = 283/8�h


6. GrommetG=GrommetN=No Grommet




10. Finish, Grommet


Laminate finish options for modestypanels on this page are as follows:114 = Folkstone grey117 = Soft grey118 = Bright white119 = Pumice


Worksurface stiffener included withrectangular tables 60�w and over.

Application Notes

AutoStrada tables include fourL-legs with glides and full or partialheight modesty (and optional endpanels).


Partial height option for 27� leg isnominally 13� and 14�h nominallywith 283/8�h legs; and may bemounted flush to underside ofworksurface or with 1� gap belowworksurface.

Knoll Office Tables

12

Table deskswith L-legs

description h w dlegheight pattern no. L M V1 V2 V3

Rectangular table desk with L-legsand partial front and side modesties

283/8� 48� 30� 27� ATDT1LPS483027(L/M/V)( )( )( )( )( ) $2,836. $3,151. $3,151. $3,215. $3,697.283/8� 60� 30� 27� ATDT1LPS603027(L/M/V)( )( )( )( )( ) 2,875. 3,195. 3,195. 3,260. 3,749.283/8� 72� 30� 27� ATDT1LPS723027(L/M/V)( )( )( )( )( ) 2,911. 3,234. 3,234. 3,300. 3,795.283/8� 72� 36� 27� ATDT1LPS723627(L/M/V)( )( )( )( )( ) 2,937. 3,263. 3,263. 3,330. 3,830.293/4� 48� 30� 283/8� ATDT1LPS483028(L/M/V)( )( )( )( )( ) 2,924. 3,249. 3,249. 3,315. 3,812.293/4� 60� 30� 283/8� ATDT1LPS603028(L/M/V)( )( )( )( )( ) 2,964. 3,293. 3,293. 3,360. 3,864.293/4� 72� 30� 283/8� ATDT1LPS723028(L/M/V)( )( )( )( )( ) 2,999. 3,332. 3,332. 3,400. 3,910.293/4� 72� 36� 283/8� ATDT1LPS723628(L/M/V)( )( )( )( )( ) 3,025. 3,361. 3,361. 3,430. 3,945.

Order Code

Example: ATDT1LPS483027VGV316AA111

A AutoStradaTD Table deskT1 Top tapered 1 side

(user only)L L-LegFM Full front modesty48 48� wide30 30� deep27 Leg heightV Surface type, veneerG GrommetV316 Finish top, MapleAA Finish, leg111 Grommet finish


To order please specify patternnumber including:1. Full or partial modesty (and end

panels when applicable)2. Width3. Depth4. Leg height (to underside of

surface)27 = 27�h28 = 283/8�h


6. GrommetG=GrommetN=No Grommet




10. Finish, Grommet


Laminate finish options for modestypanels on this page are as follows:114 = Folkstone grey117 = Soft grey118 = Bright white119 = Pumice


Worksurface stiffener included withrectangular tables 60�w and over.

Application Notes

AutoStrada tables include fourL-legs with glides and full or partialheight modesty (and optional endpanels).


Partial height option for 27� leg isnominally 13� and 14�h nominallywith 283/8�h legs; and may bemounted flush to underside ofworksurface or with 1� gap belowworksurface.

Knoll Office Tables

13

Aut

oStr

ada

Worksurface supportStraight legs, wide legs and L-legs

description type height pattern number list

Straight leg (pair) Fixed height 27� AB1AS27 ( ) $336.283/8� AB1AS28 ( ) 353.301/8� AB1AS30 ( ) 363.

Straight leg with casters (pair) Fixed height 27� AB1ASC27 ( ) 336.283/8� AB1ASC28 ( ) 353.301/8� AB1ASC30 ( ) 363.

Wide leg Fixed height 27� AB1AW27 ( ) 309.283/8� AB1AW28 ( ) 329.

L-legs (pair) Fixed height 261/2� APTLL26( ) 594.27� APTLL27( ) 611.283/8� APTLL28( ) 621.

Order Code

Example: AB1AS28 AA

AB1A AutoStrada legS Straight28 HeightAA Finish


AutoStrada straight legs, wide legsand L-legs are available in anodizedaluminum or painted finish optionlisted on AutoStrada excludingsilver.

To order specify pattern numberincluding height1. Specify finish

Application Notes

A pair of straight legs or a pair ofL-legs or one wide leg can supportone end of a worksurface when theother end is spine-supported,panel-supported or joined to aperpendicular worksurface withAT2TB brackets. If distancebetween support spans over 48�,additional support is required.

Two pairs of straight legs or L-legsmay also be specified to create afreestanding table in combinationwith an AutoStrada worksurface notto exceed 72� x 30� with acorresponding worksurface stiffener.

AutoStrada straight legs areavailable in three heights with orwithout casters:

27� from floor to underside ofworksurface ( 283/8� desk height )

283/8� from floor to underside ofworksurface (293/4� desk height )

301/8� from floor to underside ofworksurface (311/2� desk height )

AutoStrada wide legs are onlyavailable on glides, 27� or 283/8� tounderside of worksurface.

AutoStrada L-legs are available inthree heights, glide only (no casteroption) 26 1/2�h, 27�h and 283/8�h.

Knoll Office Tables

14

Introduction

This Order Guide provides basicplanning, specifications and pricinginformation for Crinion Open Tables.

Refer to KnollExtra price list forcompatible accessories such as flatscreen monitor supports, task lights,paper management accessories,keyboard and storage drawers.

Refer to Calibre, Reff or Currentsprice lists for shared and individualstorage options. Additionalinformation can be found atwww.knoll.com.

Crinion Open Table is thestraightforward alternative for open,collaborative work environments.

Crinion Open Table typicallyconsists of deep worksurfacesend-to-end and back-to-back,cantilever supported by parallelbeams between end legs or endpanels. The beams form a technologycorridor for flat screen monitorsupports, outlets and power/datadistribution. Also available is asingle-sided configuration, with asingle main beam and a smaller backbeam, and a single beamconfiguration for tables withshallower (24� deep) worksurface.

The center of dual tables or back ofsingle-sided tables features a topchannel which supports privacyscreens above the table and modularpower distribution below theworksurface.

Crinion Open Table is appropriate forlibraries and educationenvironments, laboratories, financeand trading desks, teaming areas anddesign offices.

Crinion Open Table is unique inoffering individual height-adjustability and extraordinarilydeep worksurfaces. Overall dualtable depth is 48�, 60� or 72�.

The table structure is strong enoughto span 16 feet between end legs orintermediate supports to build tablesof any length.

The continuous worksurfaces andclear kneespace enable varyingnumbers of workers to sit on eachside. Storage is typically separatedfrom the table in parallel, sharedfile-and-storage islands,perpendicular files as returns ormobile pedestals.

Crinion is distinguished by aminimalist, modern design, anddetails like square or tapered edgeworksurfaces, plastic laminate,Techwood or natural veneers, andaluminum fittings.

Crinion Open Table simplifies theplanning and specifications of anopen office, and it can make adramatic visual and functionalstatement of collaboration.

The quality and classic design ofCrinion work well in virtually anyinterior.

Knoll Office Tables

15

Cri

nion

Ope

nTa

ble

SpecificationsSpecifying Crinion Open Table

Crinion Open Tables are comprisedof worksurfaces, table baseassemblies, power components andscreens.

WorksurfacesIndividual worksurfaces areavailable in four standard widths(48�, 60�, 72�, 96�) and three depths(nominal 24�, 30�, 36�), which maybe combined to form single-sided ordual-sided groups of two to ten ormore positions.

Worksurface edge optionsWorksurfaces are 1 1/4� thick, withthree front edge options:Tapered edge, laminate, veneer ormixed.Square edge, veneerPostformed edge, laminate only

Power and accessory optionsWorksurfaces may be specified withhinged power access door andcontinuous 1/2� cord drop, or edgegrommet and continuous cord drop,or just cord drop.

Hinged power access door is 24�Wand 5�D, centered on worksurfacewidth. Door hinges toward user forcontinuity between access openingand cord drop.

Any worksurface (except endcounters) accepts clamp onKnollExtra accessories such as flatscreen monitor arm or task light.

Other worksurface typesEnd counters have front edge detailon side edges as well and aredesigned to extend dual tables 24� or30� beyond the end leg. End countersalso include 3� wide center grommet.Extended end counters are 36�Dsurfaces with center grommet orhinged power access door. Base ofthe table must be extended 12� underthe back of each extended endcounter (although top channelsshould be specified only as wide asthe worksurfaces on each side of thetable).

All end counters must be supportedby end counter cantilevers andendlegs for end counters.

Worksurface heightsFixed height cantilevers supportworksurfaces at 28 1/2�H, with 27�clear below the top (except directlybelow cantilevers).Adjustable height cantilevers enableworksurfaces to be independently setat 27�, 273/4�, 281/2�, 291/4�, or 30�H.

Open Table base assembliesComplete base assemblies simplifyspecifications for most commonconfigurations of dual or single-sidedopen tables. Base assemblies includetop channels and end caps, beams,end legs and intermediate legs(where required), trusses and topchannel supports, cantileverbrackets (specify fixed or adjustableheight) and midspan supports.Specify worksurfaces, screens, powercomponents, cable trays andaccessories separately.

Complete base assemblies areavailable for the following typicaltables, combinations of 60� or 72�worksurfaces.Single-sided or dual, 24�D, 30�D, or36�D, with continuous beam spanbetween end legs10� W two/four positions 60�W12� W two/four positions 72�W15� W three/six positions 60�WSingle sided or dual 24�D, 30�D, or36�D, with intermediate leg18� W three/six positions 72�W20� W four/eight positions 60�W24� W four/eight positions 72�W25� W five/ten positions 60�W

Open Table base componentsBase assemblies may also bespecified by individual componentsto create configurations other thanthose listed above, or to create tableswith end counters or frameless glassadd ups.In addition to worksurfaces Opentables require top channel, starterbeams for spans up to 15�, extensionbeams for additional spans of 4� to15�, intermediate legs every 16� orless, two end legs or end panels,trusses at every worksurface junctionand at each end leg or end panel.Adjustable tables require twocantilevers per worksurface (or threefor 96�W). Fixed height tables maybe supported by a fixed heightcantilever at each end, sharedcantilevers at each worksurface joint,and a midspan support bracket at thecenter of each worksurface greaterthan 48� wide. For 96�Wworksurfaces the midspan supportshould be a 24�D cantilever.Power components, cable trays andscreens are optional.

Power distributionOptional modular racewaydistributes 2+2 four circuit or 3+3six circuit configuration from a singlepoint of supply. Bundles of cablescan be managed from the floor in acable infeed shroud located at anyintermediate leg. Raceway providespower outlets anddata/communications outlet openingson one or both sides, accessedthrough hinged access doors inworksurfaces or from under table.Specify 30� raceway for two duplexoutlets each side or 42� raceway forfour duplex outlets each side. Specifycompact power module for outletsunder an extended end counter.Duplex outlets, power infeed andjumpers between raceways must bespecified separately.

Privacy screensThere are four screen options forCrinion Open Table.The standard screens are 14�H (42�horizon) or 21�H (49� horizon) inacrylic, slat wall or combinationsurfaces, tackable fabric, marker orveneer. Center screens includemounting hardware to attach to thestandard top channel. Center screensare available full width, 48�, 60� or72�, or shorter by 1� to leave space ateither end of the table for a dual endscreen. Side screens attach to thefront and back of a worksurface atany point other than at a hingedaccess door. Mounting brackets arespecified separately to correspond toeach worksurface edge detail. Dualend screens span across the end of atable (or above an end counter) fromworksurface front edges.

Frameless glass add ups areavailable in 12� height only, 48�, 60�,and 72�W. Add ups can only mountto a top channel for frameless glassadd ups, which may be at the centerof a dual table or back of asingle-sided table.

Original Crinion privacy screens are12�H or 19�H (41� or 48� horizons)and mount to a standard top channelonly.

Morrison Network fabric screens(15�H or 22�H) can also be mountedto the standard top channel withCrinion Open Table mast kit.

Accessories and storageAll Crinion worksurfaces acceptclamp base KnollExtra flat screenmonitor arms and task lights at anypoint except behind the hingedpower access door. Worksurfaces alsoaccept suspended accessories likeadjustable keyboard supports,BackPack center file or keyboarddrawers, or CPU holders. Beamlocation under most tables preventspedestals deeper than 20�underneath. However 36�D tops canbe planned on 30�D table bases tocreate additional kneespace depthand room for 24�D pedestals.

Crinion Open Table file tops areavailable for 27�H Calibre filespositioned perpendicular to the tableto act as returns. Tapered front andback edges assure consistent detailwith tapered worksurface edges. Filetops are also available for pairs offiles and back to back files.

Knoll Office Tables

16

Crinion Open Table Finishes

Finishes

L - LaminateMatching edge band unless notedotherwise117 Soft Grey118 Bright White114 Folkstone Grey111 Jet Black119 Pumice121 Micro Grey with 114


Pumice edge band123 Brushed Grey with 128 Fog

edge band128 Fog129 Micro Sand with 119 Pumice

edge band

Additional wood grain laminates forapplication on postformed laminatetops only.(not available on end counters ortapered edge tops):125 Natural Maple126 Natural Cherry124 Medium Cherry127 Walnut

V1 - Techwood Closed PoreY316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY811 NaturalY821 Blond MapleY831 Light CherryY851 Black Oak

V2 – Natural veneerV312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown Cherry(all above V2’s are flat cut)

V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown OakV439 Straight Anigre(all V2 Oaks are rift cut)

V3 – Natural Exotic veneerV512 Figured AnigreV513 Graphite Oak

Rift cutV514 MakoreV515 SycamoreV517 Natural Sapele(all remaining V3s are quarter cut)

PaintP1111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey

P2611 Beige Mist Metallic612 Medium Metallic Grey

P3118 Bright White613 Silver

AnodizedAA Anodized Aluminum

GlassTEMP Clear TemperedGL13 Powder

AcrylicO OpalT Translucent

ArchitecturalGL13 Powder

Fabric Options

Grade 10Bailey II (W359)Broadcloth (W288)Element (W1077)Foundation (W351)Growth Spurt (W692)Newbury (W812)Solid Crepe (W257)Symbolic Detail (W693)Tailor Made (W133)Versatility (W432)

Grade 15Regency (W210)

Grade 20Archaea (W1254)Banyan (W443)Bauhaus Block (W296A)Circle Line (W1146)Clarity (W281)Criss Cross (W305)Devon (W809)

Fabric OptionsGrade 20 (continued)Melbourne (W228)Nematic (W1292)Outback (W229)Reflect (W884)Resolution (W280)Walkabout (W230)Weave Three (W298)

Grade 30Basket Draft (W249)Flow (W565)Harmony (W232)Interknit (W1090)Match Point (W1145)Micro (W465)Progression (W403)Progression Striae (W463)Raku Cloth (W566)Relay (W1020)

Grade 40Amplify (W1215)Bandwidth (W1219)Clarkson (W1218)Ornament (W1078)

Grade 45Dristi (K872)Macro (W544)Mezzo (W543)

Grade 50Knoll Hopsack (K1206)Presto (K1000)

Grade 55Transition (W816)

Customers Own MaterialPrices for panels that are to bemanufactured with a customersupplied fabric will follow Grade 10panel pricing. COM fabrics aresubject to a testing charge prior toacceptance for use on panels. Panelsbearing COM fabrics are subject toextended leadtimes. It is theresponsibility of the customer’spurchasing agent to ensure COMfabric is supplied for testing andmanufacturing. Delays in receivingCOM fabric for manufacturing willresult in rescheduled delivery dates.

Mixed Finish work surfaces:To order mixed finishes, enter fourdigit finish code as follows:




11 for Y31112 for V31216 for V316, Y316Y9 for Y319Y3 for Y32324 for Y32425 for Y32526 for Y32627 for Y32728 for Y32829 for Y32941 for V43143 for V43345 for V41546 for V43647 for V41748 for V41852 for V51253 for V51354 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V427



Knoll Office Tables

17

Cri

nion

Ope

nTa

ble

Worksurfaces with center hinged power access

descriptionnominaldepth w d h pattern number L M V1 V2 V3

Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824A (L/M/1/2/3) ( )( ) $755. $880. $880. $964. $1,164.24� 60� 22� 11/4� XTTK6024A (L/M/1/2/3) ( )( ) 782. 962. 962. 1,060. 1,288.24� 72� 22� 11/4� XTTK7224A (L/M/1/2/3) ( )( ) 835. 1,015. 1,015. 1,124. 1,373.24� 96� 22� 11/4� XTTK9624A (L/M/1/2/3) ( )( ) 929. 1,144. 1,144. 1,275. 1,568.30� 48� 28� 11/4� XTTK4830A (L/M/1/2/3) ( )( ) 766. 953. 953. 1,051. 1,277.30� 60� 28� 11/4� XTTK6030A (L/M/1/2/3) ( )( ) 806. 1,031. 1,031. 1,139. 1,390.30� 72� 28� 11/4� XTTK7230A (L/M/1/2/3) ( )( ) 863. 1,066. 1,066. 1,180. 1,444.30� 96� 28� 11/4� XTTK9630A (L/M/1/2/3) ( )( ) 962. 1,204. 1,204. 1,340. 1,651.36� 48� 34� 11/4� XTTK4836A (L/M/1/2/3) ( )( ) 802. 1,036. 1,036. 1,151. 1,406.36� 60� 34� 11/4� XTTK6036A (L/M/1/2/3) ( )( ) 825. 1,109. 1,109. 1,228. 1,505.36� 72� 34� 11/4� XTTK7236A (L/M/1/2/3) ( )( ) 900. 1,121. 1,121. 1,240. 1,521.36� 96� 34� 11/4� XTTK9636A (L/M/1/2/3) ( )( ) 1,023. 1,266. 1,266. 1,410. 1,743.

Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824A (1/2/3) ( )( ) n/a n/a 721. 793. 889.24� 60� 22� 11/4� XTTS6024A (1/2/3) ( )( ) n/a n/a 756. 828. 936.24� 72� 22� 11/4� XTTS7224A (1/2/3) ( )( ) n/a n/a 793. 864. 985.24� 96� 22� 11/4� XTTS9624A (1/2/3) ( )( ) n/a n/a 852. 924. 1,068.30� 48� 28� 11/4� XTTS4830A (1/2/3) ( )( ) n/a n/a 828. 901. 1,020.30� 60� 28� 11/4� XTTS6030A (1/2/3) ( )( ) n/a n/a 852. 930. 1,069.30� 72� 28� 11/4� XTTS7230A (1/2/3) ( )( ) n/a n/a 877. 961. 1,163.30� 96� 28� 11/4� XTTS9630A (1/2/3) ( )( ) n/a n/a 924. 1,020. 1,321.36� 48� 34� 11/4� XTTS4836A (1/2/3) ( )( ) n/a n/a 901. 990. 1,140.36� 60� 34� 11/4� XTTS6036A (1/2/3) ( )( ) n/a n/a 936. 1,027. 1,168.36� 72� 34� 11/4� XTTS7236A (1/2/3) ( )( ) n/a n/a 972. 1,082. 1,278.36� 96� 34� 11/4� XTTS9636A (1/2/3) ( )( ) n/a n/a 1,044. 1,188. 1,476.

Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824A (L) ( )( ) 556. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024A (L) ( )( ) 633. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224A (L) ( )( ) 692. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624A (L) ( )( ) 757. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830A (L) ( )( ) 579. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030A (L) ( )( ) 662. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230A (L) ( )( ) 727. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630A (L) ( )( ) 804. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836A (L) ( )( ) 610. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036A (L) ( )( ) 727. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236A (L) ( )( ) 785. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636A (L) ( )( ) 870. n/a n/a n/a n/a

Order Code

Example: XTTP6030AL 118 118

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthA With center hinged

power accessL Finish Type118 Work Surface finish118 Access door finish

Specifications

Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.1. Specify finish group:

L - LaminateM - Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3

2. Specify worksurface finish.3. Speicfy hinged access cover

finish.

AA anodized aluminum and allP1,P2 and P3 paint finishes areavailable except 613 Silver.

Application Notes

Crinion 30�D worksurfacescorrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.

Worksurfaces with hinged poweraccess enable access to suspendedmodular raceway.

Power access door is 24� wide, 5�deep, centered at back edge ofworksurface.

Continous 1/2� wire dropaccommodates clamp-on flat screenmonitor arm or most power cordsplugs.

Actual worksurface depth is 22.35�,28.35� or 34.35�.

Knoll Office Tables

18

Worksurfaces with edge grommet


Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824U (L/M/1/2/3) ( )( ) $495. $620. $620. $704. $904.24� 60� 22� 11/4� XTTK6024U (L/M/1/2/3) ( )( ) 522. 702. 702. 800. 1,028.24� 72� 22� 11/4� XTTK7224U (L/M/1/2/3) ( )( ) 575. 755. 755. 864. 1,113.24� 96� 22� 11/4� XTTK9624U (L/M/1/2/3) ( )( ) 669. 884. 884. 1,015. 1,308.30� 48� 28� 11/4� XTTK4830U (L/M/1/2/3) ( )( ) 506. 693. 693. 791. 1,017.30� 60� 28� 11/4� XTTK6030U (L/M/1/2/3) ( )( ) 546. 771. 771. 879. 1,130.30� 72� 28� 11/4� XTTK7230U (L/M/1/2/3) ( )( ) 603. 806. 806. 920. 1,184.30� 96� 28� 11/4� XTTK9630U (L/M/1/2/3) ( )( ) 702. 944. 944. 1,080. 1,391.36� 48� 34� 11/4� XTTK4836U (L/M/1/2/3) ( )( ) 542. 776. 776. 891. 1,146.36� 60� 34� 11/4� XTTK6036U (L/M/1/2/3) ( )( ) 565. 849. 849. 968. 1,245.36� 72� 34� 11/4� XTTK7236U (L/M/1/2/3) ( )( ) 640. 861. 861. 980. 1,261.36� 96� 34� 11/4� XTTK9636U (L/M/1/2/3) ( )( ) 763. 1,006. 1,006. 1,150. 1,483.

Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824U (1/2/3) ( )( ) n/a n/a 461. 533. 629.24� 60� 22� 11/4� XTTS6024U (1/2/3) ( )( ) n/a n/a 496. 568. 676.24� 72� 22� 11/4� XTTS7224U (1/2/3) ( )( ) n/a n/a 533. 604. 725.24� 96� 22� 11/4� XTTS9624U (1/2/3) ( )( ) n/a n/a 592. 664. 808.30� 48� 28� 11/4� XTTS4830U (1/2/3) ( )( ) n/a n/a 568. 641. 760.30� 60� 28� 11/4� XTTS6030U (1/2/3) ( )( ) n/a n/a 592. 670. 809.30� 72� 28� 11/4� XTTS7230U (1/2/3) ( )( ) n/a n/a 617. 701. 903.30� 96� 28� 11/4� XTTS9630U (1/2/3) ( )( ) n/a n/a 664. 760. 1,061.36� 48� 34� 11/4� XTTS4836U (1/2/3) ( )( ) n/a n/a 641. 730. 880.36� 60� 34� 11/4� XTTS6036U (1/2/3) ( )( ) n/a n/a 676. 767. 908.36� 72� 34� 11/4� XTTS7236U (1/2/3) ( )( ) n/a n/a 712. 822. 1,018.36� 96� 34� 11/4� XTTS9636U (1/2/3) ( )( ) n/a n/a 784. 928. 1,216.

Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824B (L) ( )( ) 296. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024B (L) ( )( ) 373. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224B (L) ( )( ) 432. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624B (L) ( )( ) 497. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830B (L) ( )( ) 319. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030B (L) ( )( ) 402. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230B (L) ( )( ) 467. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630B (L) ( )( ) 544. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836B (L) ( )( ) 350. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036B (L) ( )( ) 467. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236B (L) ( )( ) 525. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636B (L) ( )( ) 610. n/a n/a n/a n/a

Order Code

Example: XTTP6030BL 118 812

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthB With edge grommetL Finish type118 Surface finish812 Grommet finish

Specifications

Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.1. Specify finish group:

L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3

2. Specify worksurface finish.3. Specify grommet color:

812 - Easy grey111 - Black

Application Notes

Crinion 30�D worksurfacescorrrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.

Edge grommet accommodates mostpower cord plugs up to 1� deep.


Knoll Office Tables

19

Cri

nion

Ope

nTa

ble

Worksurfaces with cord drop


Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824C (L/M/1/2/3) ( ) $455. $580. $580. $664. $864.24� 60� 22� 11/4� XTTK6024C (L/M/1/2/3) ( ) 482. 662. 662. 760. 988.24� 72� 22� 11/4� XTTK7224C (L/M/1/2/3) ( ) 535. 715. 715. 824. 1,073.24� 96� 22� 11/4� XTTK9624C (L/M/1/2/3) ( ) 629. 844. 844. 975. 1,268.30� 48� 28� 11/4� XTTK4830C (L/M/1/2/3) ( ) 466. 653. 653. 751. 977.30� 60� 28� 11/4� XTTK6030C (L/M/1/2/3) ( ) 506. 731. 731. 839. 1,090.30� 72� 28� 11/4� XTTK7230C (L/M/1/2/3) ( ) 563. 766. 766. 880. 1,144.30� 96� 28� 11/4� XTTK9630C (L/M/1/2/3) ( ) 662. 904. 904. 1,040. 1,351.36� 48� 34� 11/4� XTTK4836C (L/M/1/2/3) ( ) 502. 736. 736. 851. 1,106.36� 60� 34� 11/4� XTTK6036C (L/M/1/2/3) ( ) 525. 809. 809. 928. 1,205.36� 72� 34� 11/4� XTTK7236C (L/M/1/2/3) ( ) 600. 821. 821. 940. 1,221.36� 96� 34� 11/4� XTTK9636C (L/M/1/2/3) ( ) 723. 966. 966. 1,110. 1,443.

Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824C (1/2/3) ( ) n/a n/a 421. 493. 589.24� 60� 22� 11/4� XTTS6024C (1/2/3) ( ) n/a n/a 456. 528. 636.24� 72� 22� 11/4� XTTS7224C (1/2/3) ( ) n/a n/a 493. 564. 685.24� 96� 22� 11/4� XTTS9624C (1/2/3) ( ) n/a n/a 552. 624. 768.30� 48� 28� 11/4� XTTS4830C (1/2/3) ( ) n/a n/a 528. 601. 720.30� 60� 28� 11/4� XTTS6030C (1/2/3) ( ) n/a n/a 552. 630. 769.30� 72� 28� 11/4� XTTS7230C (1/2/3) ( ) n/a n/a 577. 661. 863.30� 96� 28� 11/4� XTTS9630C (1/2/3) ( ) n/a n/a 624. 720. 1,021.36� 48� 34� 11/4� XTTS4836C (1/2/3) ( ) n/a n/a 601. 690. 840.36� 60� 34� 11/4� XTTS6036C (1/2/3) ( ) n/a n/a 636. 727. 868.36� 72� 34� 11/4� XTTS7236C (1/2/3) ( ) n/a n/a 672. 782. 978.36� 96� 34� 11/4� XTTS9636C (1/2/3) ( ) n/a n/a 744. 888. 1,176.

Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824C (L) ( ) 256. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024C (L) ( ) 333. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224C (L) ( ) 392. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624C (L) ( ) 457. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830C (L) ( ) 279. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030C (L) ( ) 362. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230C (L) ( ) 427. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630C (L) ( ) 504. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836C (L) ( ) 310. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036C (L) ( ) 427. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236C (L) ( ) 485. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636C (L) ( ) 570. n/a n/a n/a n/a

Order Code

Example: XTTP6030CL 118

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthC With cord dropL Finish type118 Surface

Specifications

Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.

Specify finishes:L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3

Application Notes

Crinion 30�D worksurfacescorrrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.

Continous1/2� cord dropaccommodates clamp-on flat screenmonitor arm or most power cords.


Knoll Office Tables

20

End counters

descriptionnominaldepth w l h pattern number L M V1 V2 V3

End counter, tapered edge 24� 48� 24� 11/4� XTTK4824E (L/M/1/2/3) ( ) $637. $820. $820. $904. $1,103.24� 60� 24� 11/4� XTTK6024E (L/M/1/2/3) ( ) 754. 901. 901. 1,001. 1,228.24� 72� 24� 11/4� XTTK7224E (L/M/1/2/3) ( ) 783. 954. 954. 1,064. 1,312.30� 48� 30� 11/4� XTTK4830E (L/M/1/2/3) ( ) 713. 893. 893. 992. 1,217.30� 60� 30� 11/4� XTTK6030E (L/M/1/2/3) ( ) 777. 970. 970. 1,079. 1,331.30� 72� 30� 11/4� XTTK7230E (L/M/1/2/3) ( ) 811. 1,006. 1,006. 1,120. 1,384.

End counter, veneer square edge 24� 48� 24� 11/4� XTTS4824E (1/2/3) ( ) n/a n/a 421. 493. 589.24� 60� 24� 11/4� XTTS6024E (1/2/3) ( ) n/a n/a 456. 528. 636.24� 72� 24� 11/4� XTTS7224E (1/2/3) ( ) n/a n/a 493. 564. 685.30� 48� 30� 11/4� XTTS4830E (1/2/3) ( ) n/a n/a 528. 601. 720.30� 60� 30� 11/4� XTTS6030E (1/2/3) ( ) n/a n/a 552. 630. 769.30� 72� 30� 11/4� XTTS7230E (1/2/3) ( ) n/a n/a 577. 661. 863.

End counter for postformed plastic 24� 48� 24� 11/4� XTTP4824E (L) ( ) 475. n/a n/a n/a n/a24� 60� 24� 11/4� XTTP6024E (L) ( ) 564. n/a n/a n/a n/a24� 72� 24� 11/4� XTTP7224E (L) ( ) 635. n/a n/a n/a n/a30� 48� 30� 11/4� XTTP4830E (L) ( ) 534. n/a n/a n/a n/a30� 60� 30� 11/4� XTTP6030E (L) ( ) 635. n/a n/a n/a n/a30� 72� 30� 11/4� XTTP7230E (L) ( ) 760. n/a n/a n/a n/a

* Note

Order Code

Example: XTTP6024EL 118

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width24 LengthE End counterL Finish Type118 Surface

Specifications

End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.

Specify finishes:L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3

Application Notes

End counters mount at the ends ofdual tables with two end countercantilever brackets. Specify dualend legs for end counters instead ofstandard dual end legs (tables withend counters must be specified fromcomponents, not assemblies).

Specify 48� W for dual 24� tables,60� W for dual 30� tables and 72� Wfor dual 36� tables.

End counters may not be used withend panel kits.

Specify added length of 24� or 30�beyond end leg for end counters.

* Note - End counters forpostformed plastic are not availablein these finishes:121 Micro grey129 Micro sand122 Brushed sand123 Brushed grey

Knoll Office Tables

21

Cri

nion

Ope

nTa

ble

Extended end counters

descriptionnominaldepth w l h pattern no. L M V1 V2 V3

Extended end counter, tapered edgewith hinged power access

36� 48� 36� 11/4� XTTK4836D (L/M/1/2/3) ( )( ) $1,058. $1,229. $1,229. $1,339. $1,587.36� 60� 36� 11/4� XTTK6036D (L/M/1/2/3) ( )( ) 1,086. 1,281. 1,281. 1,395. 1,659.36� 72� 36� 11/4� XTTK7236D (L/M/1/2/3) ( )( ) 1,166. 1,379. 1,379. 1,499. 1,793.

Extended end counter, tapered edgewith grommet

36� 48� 36� 11/4� XTTK4836E (L/M/1/2/3) ( ) 783. 954. 954. 1,064. 1,312.36� 60� 36� 11/4� XTTK6036E (L/M/1/2/3) ( ) 811. 1,006. 1,006. 1,120. 1,384.36� 72� 36� 11/4� XTTK7236E (L/M/1/2/3) ( ) 891. 1,104. 1,104. 1,224. 1,518.

Extended end counter, veneer square edgewith hinged power access

36� 48� 36� 11/4� XTTS4836D (1/2/3) ( )( ) n/a n/a 744. 812. 927.36� 60� 36� 11/4� XTTS6036D (1/2/3) ( )( ) n/a n/a 852. 936. 1,138.36� 72� 36� 11/4� XTTS7236D (1/2/3) ( )( ) n/a n/a 936. 1,024. 1,266.

Extended end counter, veneer square edgewith grommet

36� 48� 36� 11/4� XTTS4836E (1/2/3) ( ) n/a n/a 469. 537. 652.36� 60� 36� 11/4� XTTS6036E (1/2/3) ( ) n/a n/a 577. 661. 863.36� 72� 36� 11/4� XTTS7236E (1/2/3) ( ) n/a n/a 661. 749. 991.

Order Code

Example: XTTP6036DL 118 AA

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width36 LengthD End counter,center

hinged power accessL Finish Type118 Surface finishAA Access door finish

Specifications

End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.1. Specify finish group:


2. Specify worksurface finish.3. Specify hinged access cover

finish.

Hinged access covers are availablein AA anodized aluminum and allstandard paint finishes except 613Silver.

Application Notes




Each extended end counter requiresbase assembly 12� longer thanworksurfaces on each side.


Knoll Office Tables

22

Extended end counters

descriptionnominaldepth w l h pattern no. L M V1 V2 V3

Extended end counter, postformed plasticwith hinged power access

36� 48� 36� 11/4� XTTP4836D (L) ( )( ) $910. n/a n/a n/a n/a36� 60� 36� 11/4� XTTP6036D (L) ( )( ) 1,035. n/a n/a n/a n/a36� 72� 36� 11/4� XTTP7236D (L) ( )( ) 1,125. n/a n/a n/a n/a

* Note

Extended end counter, postformed plasticwith grommet

36� 48� 36� 11/4� XTTP4836E (L) ( ) 635. n/a n/a n/a n/a36� 60� 36� 11/4� XTTP6036E (L) ( ) 760. n/a n/a n/a n/a36� 72� 36� 11/4� XTTP7236E (L) ( ) 850. n/a n/a n/a n/a

* Note

Order Code

Example: XTTP6036DL 118 AA

XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width36 LengthD End counter,center

hinged power accessL Finish Type118 Surface finishAA Access door finish

Specifications

End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.1. Specify finish group:


2. Specify worksurface finish.3. Specify hinged access cover

finish.

Hinged access covers are availablein AA anodized aluminum and allstandard paint finishes except 613Silver.

Application Notes




Each extended end counter requiresbase assembly 12� longer thanworksurfaces on each side.


Knoll Office Tables

23

Cri

nion

Ope

nTa

ble

File tops

description w d h pattern number L M V1 V2 V3

File top, tapered edge 30� 18� 11/4� XTTK3018F (L/M/1/2/3) ( ) $333. $564. $552. $589. $853.30� 36� 11/4� XTTK3036F (L/M/1/2/3) ( ) 456. 712. 712. 798. 1,002.36� 18� 11/4� XTTK3618F (L/M/1/2/3) ( ) 345. 577. 564. 595. 908.36� 36� 11/4� XTTK3636F (L/M/1/2/3) ( ) 475. 780. 780. 873. 1,100.42� 18� 11/4� XTTK4218F (L/M/1/2/3) ( ) 357. 589. 577. 606. 964.42� 36� 11/4� XTTK4236F (L/M/1/2/3) ( ) 497. 810. 810. 915. 1,154.60� 18� 11/4� XTTK6018F (L/M/1/2/3) ( ) 564. 870. 870. 960. 1,200.60� 36� 11/4� XTTK6036F (L/M/1/2/3) ( ) 611. 928. 928. 1,048. 1,325.72� 18� 11/4� XTTK7218F (L/M/1/2/3) ( ) 593. 900. 900. 1,008. 1,262.72� 36� 11/4� XTTK7236F (L/M/1/2/3) ( ) 653. 941. 941. 1,060. 1,341.84� 18� 11/4� XTTK8418F (L/M/1/2/3) ( ) 641. 960. 960. 1,080. 1,321.84� 36� 11/4� XTTK8436F (L/M/1/2/3) ( ) 698. 1,011. 1,011. 1,152. 1,461.

File top, veneer square edge 30� 18� 11/4� XTTS3018F (1/2/3) ( ) n/a n/a 246. 270. 449.36� 18� 11/4� XTTS3618F (1/2/3) ( ) n/a n/a 253. 276. 484.42� 18� 11/4� XTTS4218F (1/2/3) ( ) n/a n/a 259. 283. 523.

File top, postformed plastic 30� 18� 11/4� XTTP3018F (L) ( ) 226. n/a n/a n/a n/a36� 18� 11/4� XTTP3618F (L) ( ) 238. n/a n/a n/a n/a42� 18� 11/4� XTTP4218F (L) ( ) 249. n/a n/a n/a n/a

Order Code

Example: XTTP4218FL 118

XT Crinion Open TableT WorksurfaceP Postformed42 Width18 DepthF File topL Finish type118 Surface

Specifications

File tops are 11/4� thick with squareedge or tapered edge option taperingto 1/2� thick front edge. Tapered edgefile tops are tapered front and backedges only.

Specify finishes:L - LaminateM - Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3

Application Notes

File tops correspond to 30�, 36� or42�W lateral files. File tops on 2high Calibre files positionedperpendicular to the Crinion OpenTable serve as a worksurface return.

Knoll Office Tables

24

Complete base assembliesfixed height 24� D dual

description nominal w d h pattern number P1/P2 P3

Base assembly, continuous 10’ dual 120� 44� 281/2� XTB1 BAS 24D10CF ( )( ) $8,531. $8,756.12’ dual 144� 44� 281/2� XTB1 BAS 24D12CF ( )( ) 8,888. 9,115.15’ dual 180� 44� 281/2� XTB1 BAS 24D15CF ( )( ) 10,285. 10,519.

Base assembly, segmented 10’ + 5� dual 180� 44� 281/2� XTB1 BAS 24D15SF ( )( ) 11,033. 11,269.

Base assembly, with intermediate leg 12’ + 6� dual 216� 44� 281/2� XTB1 BAS 24D18SF ( )( ) 12,174. 12,409.10’ + 10’ dual 240� 44� 281/2� XTB1 BAS 24D20SF ( )( ) 13,306. 13,549.12’ + 12’ dual 288� 44� 281/2� XTB1 BAS 24D24SF ( )( ) 14,020. 14,264.15’ + 10’ dual 300� 44� 281/2� XTB1 BAS 24D25SF ( )( ) 15,060. 15,312.

Order Code

Example: XTB1BAS24D10CF 613AA

XT Crinion Open TableB1 Base componentsBAS Assembly24 DepthD Dual10 WidthC ContinuousF Fixed height613 Base finishAA Top channel finish

Specifications

Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.

Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.

1. Specify painted finish for baseassembly.For leg and cantilever bracketsspecify one paint finish for all.

2. Specify finish for top channel.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.

Application Notes

Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.

No table on this page has beamslonger than 15’.

Base assemblies correspond to:10’: four 60�x24�D worksurfaces12’: four 72�x24�D worksurfaces15’: six 60�X24�D worksurfaces18’: six 72�x24�D worksurfaces20’: eight 60�x24�D worksurfaces24’: eight 72�x24�D worksurfaces25’: ten 60�x24�D worksurfaces

Knoll Office Tables

25

Cri

nion

Ope

nTa

ble

Complete base assembliesfixed height 24� D single sided


Base assembly, continuous 10’ single sided 120� 24� 281/2� XTB1 BAS 24S10CF ( )( ) $7,675. $7,894.12’ single sided 144� 24� 281/2� XTB1 BAS 24S12CF ( )( ) 8,034. 8,250.15’ single sided 180� 24� 281/2� XTB1 BAS 24S15CF ( )( ) 9,112. 9,333.

Base assembly, segmented 10’ + 5� single sided 180� 24� 281/2� XTB1 BAS 24S15SF ( )( ) 9,861. 10,082.

Base assembly, with intermediate leg 12’ + 6� single sided 216� 24� 281/2� XTB1 BAS 24S18SF ( )( ) 11,001. 11,223.10’ + 10’ single sided 240� 24� 281/2� XTB1 BAS 24S20SF ( )( ) 11,815. 12,041.12’ + 12’ single sided 288� 24� 281/2� XTB1 BAS 24S24SF ( )( ) 12,529. 12,754.15’ + 10’ single sided 300� 24� 281/2� XTB1 BAS 24S25SF ( )( ) 13,250. 13,481.

Order Code

Example: XTB1BAS24S10CF 613118

XT Crinion Open TableB1 Base componentsBAS Assembly24 DepthS Single10 WidthC ContinuousF Fixed height613 Base finish118 Top channel finish

Specifications


Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base

assembly.For legs and cantilever bracketsspecify one paint finish for all.

2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.

Application Notes



Base assemblies correspond to:10’: two 60�x24�D worksurfaces12’: two 72�x24�D worksurfaces15’: three 60�X24�D worksurfaces18’: three 72�x24�D worksurfaces20’: four 60�x24�D worksurfaces24’: four 72�x24�D worksurfaces25’: five 60�x24�D worksurfaces

Knoll Office Tables

26



Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 30D10CF ( )( ) $10,151. $10,439.12’ dual 144� 54� 281/2� XTB1 BAS 30D12CF ( )( ) 10,565. 10,852.15’ dual 180� 54� 281/2� XTB1 BAS 30D15CF ( )( ) 12,299. 12,617.

Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 30D15SF ( )( ) 13,336. 13,654.

Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 30D18SF ( )( ) 14,776. 15,140.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 30D20SF ( )( ) 16,474. 16,868.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 30D24CF ( )( ) 17,304. 17,698.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 30D25CF ( )( ) 18,621. 19,046.

Order Code

Example: XTB1BAS30D18SF 613111

XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthD Dual18 WidthS SegmentedF Fixed height613 Base finish111 Top channel finish

Specifications





Application Notes




Knoll Office Tables

27

Cri

nion

Ope

nTa

ble



Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 30S10CF ( )( ) $8,935. $9,184.12’ single sided 144� 283/4� 281/2� XTB1 BAS 30S12CF ( )( ) 9,349. 9,597.15’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15CF ( )( ) 10,636. 10,900.

Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 30S15SF ( )( ) 9,945. 10,208.

Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 30S18SF ( )( ) 10,799. 11,060.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 30S20SF ( )( ) 12,280. 12,559.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 30S24SF ( )( ) 14,839. 15,116.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 30S25SF ( )( ) 15,712. 16,004.

Order Code

Example: XTB1BAS30S15CF 613115

XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthS Single15 WidthC ContinuousF Fixed height613 Base finish115 Top channel finish

Specifications





Application Notes




Knoll Office Tables

28

Complete base assembliesadjustable height 30� D dual


Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 30D10CA ( )( ) $10,301. $10,600.12’ dual 144� 54� 281/2� XTB1 BAS 30D12CA ( )( ) 10,716. 11,015.15’ dual 180� 54� 281/2� XTB1 BAS 30D15CA ( )( ) 12,732. 13,077.

Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 30D15SA ( )( ) 13,769. 14,115.

Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 30D18SA ( )( ) 15,209. 15,602.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 30D20SA ( )( ) 17,190. 17,629.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 30D24CA ( )( ) 18,020. 18,458.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 30D25CA ( )( ) 19,622. 20,106.

Order Code

Example: XTB1BAS30D18SA 613118

XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthD Dual18 WidthS SegmentedA Adjustable height613 Base finish118 Top channel finish

Specifications

Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.1. Specify base finish for base



Application Notes

Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,top channel and end caps.



Knoll Office Tables

29

Cri

nion

Ope

nTa

ble

Complete base assembliesadjustable height 30� D single sided


Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 30S10CA ( )( ) $9,034. $9,286.12’ single sided 144� 283/4� 281/2� XTB1 BAS 30S12CA ( )( ) 9,448. 9,700.15’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15CA ( )( ) 10,888. 11,164.

Base assembly, segmented 10’ +5’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15SA ( )( ) 10,198. 10,474.

Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 30S18SA ( )( ) 11,280. 11,557.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 30S20SA ( )( ) 12,685. 12,986.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 30S24SA ( )( ) 15,243. 15,543.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 30S25SA ( )( ) 16,268. 16,591.

Order Code

Example: XTB1BAS30S18SA 613AA

XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthS Single18 WidthS SegmentedA Adjustable height613 Base finishAA Top channel finish

Specifications




Application Notes




Knoll Office Tables

30


description nominal w h d pattern number P1/P2 P3

Base assembly, continuous 10’ dual 120� 281/2� 54� XTB1 BAS 36D10CF ( )( ) $10,289. $10,578.12’ dual 144� 281/2� 54� XTB1 BAS 36D12CF ( )( ) 10,703. 10,991.15’ dual 180� 281/2� 54� XTB1 BAS 36D15CF ( )( ) 12,482. 12,801.

Base assembly, segmented 10’ + 5� dual 180� 281/2� 54� XTB1 BAS 36D15SF ( )( ) 13,520. 13,839.

Base assembly, with intermediate leg 12’ + 6� dual 216� 281/2� 54� XTB1 BAS 36D18SF ( )( ) 14,960. 15,324.10’ + 10’ dual 240� 281/2� 54� XTB1 BAS 36D20SF ( )( ) 16,704. 17,099.12’ + 12’ dual 288� 281/2� 54� XTB1 BAS 36D24CF ( )( ) 17,533. 17,927.15’ + 10’ dual 300� 281/2� 54� XTB1 BAS 36D25CF ( )( ) 18,898. 19,322.

Order Code

Example: XTB1BAS36D18SF 613111

XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthD Dual18 WidthS SegmentedF Fixed height613 Base finish111 Top channel finish

Specifications





Application Notes




Knoll Office Tables

31

Cri

nion

Ope

nTa

ble



Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 36S10CF ( )( ) $9,073. $9,321.12’ single sided 144� 283/4� 281/2� XTB1 BAS 36S12CF ( )( ) 9,487. 9,736.15’ single sided 180� 283/4� 281/2� XTB1 BAS 36S15CF ( )( ) 10,821. 11,084.

Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 36S15SF ( )( ) 10,130. 10,393.

Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 36S18SF ( )( ) 11,213. 11,476.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 36S20SF ( )( ) 12,512. 12,789.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 36S24SF ( )( ) 15,070. 15,347.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 36S25SF ( )( ) 15,987. 16,281.

Order Code

Example: XTB1BAS36S18SF 613AA

XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthS Single18 WidthS SegmentedF Fixed height613 Base finishAA Top channel finish

Specifications





Application Notes




Knoll Office Tables

32

Complete base assembliesadjustable height 36� D dual


Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 36D10CA ( )( ) $10,439. $10,738.12’ dual 144� 54� 281/2� XTB1 BAS 36D12CA ( )( ) 10,852. 11,154.15’ dual 180� 54� 281/2� XTB1 BAS 36D15CA ( )( ) 12,917. 13,262.

Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 36D15SA ( )( ) 13,953. 14,298.

Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 36D18SA ( )( ) 15,393. 15,785.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 36D20SA ( )( ) 17,420. 17,859.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 36D24CA ( )( ) 18,251. 18,688.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 36D25CA ( )( ) 19,898. 20,382.

Order Code

Example: XTB1BAS36D18SA 613115

XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthD Dual18 WidthS SegmentedA Adjustable height613 Base finish115 Top channel finish

Specifications




Application Notes




Knoll Office Tables

33

Cri

nion

Ope

nTa

ble

Complete base assembliesadjustable height 36� D single sided


Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 36S10CA ( )( ) $9,172. $9,425.12’ single sided 144� 283/4� 281/2� XTB1 BAS 36S12CA ( )( ) 9,586. 9,839.15’ single sided 180� 283/4� 281/2� XTB1 BAS 36S15CA ( )( ) 11,073. 11,350.

Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 36S15SA ( )( ) 10,381. 10,659.

Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 36S18SA ( )( ) 11,464. 11,741.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 36S20SA ( )( ) 12,917. 13,215.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 36S24SA ( )( ) 15,474. 15,773.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 36S25SA ( )( ) 16,546. 16,868.

Order Code

Example: XTB1BAS36S18SA 613AA

XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthS Single18 WidthS SegmentedA Adjustable height613 Base finishAA Top channel finish

Specifications




Application Notes




Knoll Office Tables

34

Top channels

description nominal w d h pattern number list price

Top channel 4’ 48� 21/2� 2� XTC1 48 ( ) $154.5’ 60� 21/2� 2� XTC1 60 ( ) 196.6’ 72� 21/2� 2� XTC1 72 ( ) 230.8’ 96� 21/2� 2� XTC1 96 ( ) 312.10’ 120� 21/2� 2� XTC1 120 AA 392.12’ 144� 21/2� 2� XTC1 144 AA 461.

Top channel end cap 21/2� 2� XTC1 END ( ) 35.

Top channel forframeless glass addups

4’ 48� 21/2� 2� XTCA1 48 ( ) 230.5’ 60� 21/2� 2� XTCA1 60 ( ) 277.6’ 72� 21/2� 2� XTCA1 72 ( ) 328.8’ 96� 21/2� 2� XTCA1 96 ( ) 426.10’ 120� 21/2� 2� XTCA1 120 AA 519.12’ 144� 21/2� 2� XTCA1 144 AA 646.

Top channel filler 48� XTCF 48 ( ) 29.60� XTCF 60 ( ) 40.72� XTCF 72 ( ) 40.

Order Code

Example: XTC1120AA

XT Crinion open tableC1 Top channel120 WidthAA Finish

Specifications

Top channels are extrudedaluminum with natural anodizedfinish AA or any standard paintedfinish except 613 Silver.

Top channel end caps are die castaluminum AA or any standardpainted finish except 613 Silver.

Top channel filler is 812 Easy Greyor 111 Black.

Application Notes

Crinion Open Table top channelsupports privacy screens andsuspended raceway components atany point. Top channel is requiredat the center of dual tables.

Top channels and end caps areincluded in complete baseassemblies.

Top channels correspond in width toone or two worksurface widths.

Knoll Office Tables

35

Cri

nion

Ope

nTa

ble

Beams for single sided or dual tables24� D


Starter beam set for 24� D 5’ 52� 3� 8� XTB1TB5C $1,037.6’ 64� 3� 8� XTB1TB6C 1,152.8’ 88� 3� 8� XTB1TB8C 1,383.10’ 112� 3� 8� XTB1TB10C 1,672.12’ 136� 3� 8� XTB1TB12C 1,959.15’ 172� 3� 8� XTB1TB15C 2,419.

Extension beam set for 24� D tables 4’ 48� 3� 8� XTB1TB4E 1,383.5’ 60� 3� 8� XTB1TB5E 1,498.6’ 72� 3� 8� XTB1TB6E 1,613.8’ 96� 3� 8� XTB1TB8E 1,843.10’ 120� 3� 8� XTB1TB10E 2,132.12’ 144� 3� 8� XTB1TB12E 2,419.15’ 180� 3� 8� XTB1TB15E 2,881.

Order Code

Example: XTB1TB15C

XT Crinion Open TableB1 Base componentsTB Dual beam set15 WidthC Starter

Specifications

Beams are extruded aluminum withnatural anodized finish.

Application Notes

Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses.

Beam sets can be used with eitherdual or single sided tables. Tablebases require one starter beam andextension beam adding up to thelength as the sum of the worksurfacewidths on one side.

Extension beam sets are specifiedonly to add on to starter sets or otherextension beams.

Beam sets must be supported byintermediate legs at least every 16’.Intermediate leg must be positionedat beam truss location, where twoworksurfaces meet.

Knoll Office Tables

36

Beams for dual tables30� and 36� D

description nominal w h pattern number list price

Starter beam set for dual table30� or 36� (pair of beams)

5’ 52� 3� 8� XTB1DB5C $1,383.6’ 64� 3� 8� XTB1DB6C 1,498.8’ 88� 3� 8� XTB1DB8C 1,959.10’ 112� 3� 8� XTB1DB10C 2,304.12’ 136� 3� 8� XTB1DB12C 2,650.15’ 172� 3� 8� XTB1DB15C 3,111.

Extension beam set for dual table30� or 36� (pair of beams)

4’ 48� 3� 8� XTB1DB4E 1,843.5’ 60� 3� 8� XTB1DB5E 1,843.6’ 72� 3� 8� XTB1DB6E 1,959.8’ 96� 3� 8� XTB1DB8E 2,419.10’ 120� 3� 8� XTB1DB10E 2,765.12’ 144� 3� 8� XTB1DB12E 3,111.15’ 180� 3� 8� XTB1DB15E 3,573.

Order Code

Example: XTB1DB15C

XT Crinion Open TableB1 Base componentsDB Dual beam set15 WidthC Starter

Specifications


Beam sets are starter or extension.


Application Notes

Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. Beam sets may be used witheither worksurface depth. Dualtables require one pair of mainbeams of the same nominal width asthe sum of the worksurfaces on eachside.


Knoll Office Tables

37

Cri

nion

Ope

nTa

ble

Beams for single sided tables30� and 36� D


Starter beam set for single sided table30� or 36� ( main and back beam)

5’ 52� 8� XTB1SB5C $1,211.6’ 64� 8� XTB1SB6C 1,267.8’ 88� 8� XTB1SB8C 1,672.10’ 112� 8� XTB1SB10C 1,959.12’ 136� 8� XTB1SB12C 2,304.15’ 172� 8� XTB1SB15C 2,650.

Extension beam set for single sided table30� or 36� ( main and back beam )

4’ 48� 8� XTB1SB4E 1,613.5’ 60� 8� XTB1SB5E 1,672.6’ 72� 8� XTB1SB6E 1,729.8’ 96� 8� XTB1SB8E 2,132.10’ 120� 8� XTB1SB10E 2,419.12’ 144� 8� XTB1SB12E 2,765.15’ 180� 8� XTB1SB15E 3,111.

Order Code

Example: XTB1DB15C

XT Crinion Open TableB1 Base componentsDB Dual beam set15 WidthC Starter

Specifications


Beam sets are starter or extension.


Application Notes

Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. Beam sets may be used witheither worksurface depth. Singlesided tables require one pair ofmain beams of the same nominalwidth as the sum of theworksurfaces on each side.


Knoll Office Tables

38

End legs, intermediate leg sets for dual tables

description application w d h pattern number P1/P2 P3

End leg for dual tables(pair of legs for 36�D worksurface)

24� D worksurface 4� 44� 24� XTB1EDD24 ( ) $4,171. $4,379.30� D worksurface 4� 54� 24� XTB1EDD30 ( ) 4,171. 4,379.36� D worksurface 4� 54� 24� XTB1EDD36 ( ) 4,171. 4,379.

Intermediate leg for dual table(pair of legs for 30� and 36�D)

24� D worksurfaces 4� 23/4� 16� XTB2LDD24 ( ) 500. 500.30�&36� D worksurfaces 4� 23/4� 16� XTB2LDD ( ) 550. 550.

Shroud for intermediate leg infeed kit 24� D or single sided 33/4� 21/2� 15� XTB1 SLIK ( ) 157. 165.30� D 11� 4� 15� XTB1 SLIK30 ( ) 198. 208.36� D 23� 4� 15� XTB1 SLIK36 ( ) 232. 245.

End leg for end counters both ends(pair of legs for 36�D worksurface)

48� W end counter 4� 44� 24� XTB1XDD24 ( ) 4,459. 4,667.60� W end counter 4� 54� 24� XTB1XDD30 ( ) 4,459. 4,667.72� W end counter 4� 54� 24� XTB1XDD36 ( ) 4,459. 4,667.

Order Code

Example: XTB1EDD30 118

XT Crinion Open TableB1 Base componentsE End legD DualD Desk height30 Depth of tops118 Finish

Specifications

Specify paint finish code afterpattern number.

Application Notes

Crinion Open Table bases areassembled from main beams, endlegs or end panels, intermediatelegs and trusses. After selectingstarter or segmented beam sets,specify legs to support each end ofbeams. End legs support mainbeams at each end of a table.

Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilevers forend counters.

Intermediate legs must be specifiedto provide support under beam setsspanning longer than 16’.Intermediate legs may be positionedunder beams at any beam trusslocation. End legs include beam endplates and hardware.

Shroud for intermediate leg kitencloses the space between legs toprotect power, data andcommunication cables between floorand table base. Side covers may beremoved for access.

Shroud for 24�d intermediate leg isU-shaped cover that attaches to sideof intermediate leg for 24�d or anysingle sided intermediate leg.

End legs for 24�D worksurfaces andend legs for 48�W end countershave only one end plate forattaching a single centered beam for24�D tables.

End legs for 30�D and 36�Dworksurfaces and end legs for 60�Wand 72�W end counters have twoend plates for attaching two beamsfor 30�D and 36�D tables.

Knoll Office Tables

39

Cri

nion

Ope

nTa

ble

End legs, intermediate leg sets for dual tables

description application w d h pattern number P1/P2 P3

End leg for end counters one end only(pair of legs for 36�D worksurface)

48� W end counter 4� 44� 24� XTB1YDD24 ( ) $4,315. $4,523.60� W end counter 4� 54� 24� XTB1YDD30 ( ) 4,315. 4,523.72� W end counter 4� 54� 24� XTB1YDD36 ( ) 4,315. 4,523.

Order Code

Example: XTB1EDD30 118

XT Crinion Open TableB1 Base componentsE End legD DualD Desk height30 Depth of tops118 Finish

Specifications


Application Notes


Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilevers forend counters.



Shroud for 24�d intermediate leg isU-shaped cover that attaches to sideof intermediate leg for 24�d or anysingle sided intermediate leg.

End legs for 24�D worksurfaces andend legs for 48�W end countershave only one end plate forattaching a single centered beam for24�D tables.

End legs for 30�D and 36�Dworksurfaces and end legs for 60�Wand 72�W end counters have twoend plates for attaching two beamsfor 30�D and 36�D tables.

Knoll Office Tables

40

End legs, intermediate leg sets for single sided tables

description application width depth height pattern number P1/P2 P3

End leg for single sided tables(pair of legs)

24� D worksurface 4� 24� 24� XTB1ESD24 ( ) $4,171. $4,379.30� D worksurface 4� 283/4� 24� XTB1ESD30 ( ) 4,171. 4,379.36� D worksurface 4� 283/4� 24� XTB1ESD36 ( ) 4,171. 4,379.

Intermediate leg for single sided table 24� D worksurfaces 4� 23/4� 16� XTB2LSD24 ( ) 450. 450.30�&36� D worksurfaces 4� 23/4� 16� XTB2LSD ( ) 550. 550.

Order Code

Example: XTB1ESD30 118

XT Crinion Open TableB1 Base componentsE End legS SingleD Desk height30 Depth of tops118 Finish

Specifications


Application Notes


Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilvers forend counters.



Knoll Office Tables

41

Cri

nion

Ope

nTa

ble

End panels for dual tables and single sided tables, painted

description application width depth height pattern no. P1/P2/P3

End panels for dual tables(pair of end panels)

24� D worksurface 11/4� 46� 251/2� XTB1EP2DD24P( )( ) $2,200.30� D worksurface 11/4� 58� 251/2� XTB1EP2DD30P( )( ) 3,100.36� D worksurface 11/4� 70� 251/2� XTB1EP2DD36P( )( ) 3,300.

End panels for dual tables(single end panel)

24� D worksurface 11/4� 46� 251/2� XTB1EP1DD24P( )( ) 1,100.30� D worksurface 11/4� 58� 251/2� XTB1EP1DD30P( )( ) 1,550.36� D worksurface 11/4� 70� 251/2� XTB1EP1DD36P( )( ) 1,650.

End panels for single sided tables(pair of end panels)

24� D worksurface 11/4� 253/16� 251/2� XTB1EP2SD24P( )( ) 1,950.30� D worksurface 11/4� 303/16� 251/2� XTB1EP2SD30P( )( ) 2,800.36� D worksurface 11/4� 363/16� 251/2� XTB1EP2SD36P( )( ) 2,900.

End panels for single sided tables(single end panel)

LH ShownRH Opposite

24� D worksurface, Left 11/4� 253/16� 251/2� XTB1EP1LD24P( )( ) 975.24� D worksurface, Right 11/4� 253/16� 251/2� XTB1EP1RD24P( )( ) 975.30� D worksurface, Left 11/4� 303/16� 251/2� XTB1EP1LD30P( )( ) 1,400.30� D worksurface, Right 11/4� 303/16� 251/2� XTB1EP1RD30P( )( ) 1,400.36� D worksurface, Left 11/4� 363/16� 251/2� XTB1EP1LD36P( )( ) 1,450.36� D worksurface, Right 11/4� 363/16� 251/2� XTB1EP1RD36P( )( ) 1,450.

Order Code

Example: XTB1EP2DD 24P118118

XT Crinion Open TableB1 Base componentsEP2 End panelD DualD Desk Height24 Depth of topsP Finish118 Finish118 Finish

Specification

Specify paint finish for brackets,then specify paint finish for endpanel.

Application Notes

End panels may be specified as analternative to End legs to supporteach end of beams.

End panel kits include end panel,connecting hardware and supportlegs.

End panel kits are not compatiblewith end counters.

Knoll Office Tables

42

End panels for dual tables and single sided tables, laminateand veneer

description application w d h pattern no. L V1 V2 V3

End panels for dual tables(pair of end panels)

24� D worksurface 11/4� 46� 251/2� XTB1EP2DD24( )( ) $2,300. $2,400. $2,900. $3,000.30� D worksurface 11/4� 58� 251/2� XTB1EP2DD30( )( ) 3,200. 3,400. 3,900. 4,100.36� D worksurface 11/4� 70� 251/2� XTB1EP2DD36( )( ) 3,400. 3,500. 4,100. 4,300.

End panel for dual tables(single end panel)

24� D worksurface 11/4� 46� 251/2� XTB1EP1DD24( )( ) 1,150. 1,200. 1,450. 1,500.30� D worksurface 11/4� 58� 251/2� XTB1EP1DD30( )( ) 1,600. 1,700. 1,950. 2,050.36� D worksurface 11/4� 70� 251/2� XTB1EP1DD36( )( ) 1,700. 1,750. 2,050. 2,150.

End panels for single sided tables(pair of end panels)

24� D worksurface 11/4� 253/16� 251/2� XTB1EP2SD24( )( ) 2,050. 2,200. 2,500. 2,600.30� D worksurface 11/4� 303/16� 251/2� XTB1EP2SD30( )( ) 2,900. 3,100. 3,400. 3,600.36� D worksurface 11/4� 363/16� 251/2� XTB1EP2SD36( )( ) 3,000. 3,200. 3,600. 3,800.

End panel for single sided tables(single end panel)

LH ShownRH Opposite

24� D worksurface, Left 11/4� 253/16� 251/2� XTB1EP1LD24( )( ) 1,025. 1,100. 1,250. 1,300.24� D worksurface, Right 11/4� 253/16� 251/2� XTB1EP1RD24( )( ) 1,025. 1,100. 1,250. 1,300.30� D worksurface, Left 11/4� 303/16� 251/2� XTB1EP1LD30( )( ) 1,450. 1,550. 1,700. 1,800.30� D worksurface, Right 11/4� 303/16� 251/2� XTB1EP1RD30( )( ) 1,450. 1,550. 1,700. 1,800.36� D worksurface, Left 11/4� 363/16� 251/2� XTB1EP1LD36( )( ) 1,500. 1,600. 1,800. 1,900.36� D worksurface, Right 11/4� 363/16� 251/2� XTB1EP1RD36( )( ) 1,500. 1,600. 1,800. 1,900.

Order Code

Example: XTB1EP2DD 24118 118

XT Crinion Open TableB1 Base componentsEP2 End panelD DualD Desk Height24 Depth of tops118 Finish118 Finish

Specifications

Specify paint finish for brackets,then specify laminate or veneerfinish for end panel.

Brushed and woodgrain laminatesare not available on 70� wide endpanels for use on 36�D dual sidedtables.

Application Notes

End panels may be specified as analternative to End legs to supporteach end of beams.

End panel kits include end panel,connecting hardware and supportlegs.

End panel kits are not compatiblewith end counters.

Knoll Office Tables

43

Cri

nion

Ope

nTa

ble

Beam trusses

description application w d h pattern number P1/P2/P3

Beam truss for dual tables 30� D worksurface 3� 11� 10� XTB1XD30 ( ) $508.36� D worksurface 3� 23� 10� XTB1XD36 ( ) 553.

Top channel support 24� D worksurface XTB1T24 ( ) 183.

Beam truss for single sided tables 30� D worksurface 3� XTB1XS30 ( ) 508.36� D worksurface 3� XTB1XS36 ( ) 553.

Beam truss for dual tablesno top channel support

30� D worksurface 3� 11� 8� XTB1XD30N ( ) 393.36� D worksurface 3� 23� 8� XTB1XD36N ( ) 451.

Beam truss for single sided tablesno top channel support

30� D worksurface 3� XTB1XS30N ( ) 393.36� D worksurface 3� XTB1XS36N ( ) 451.

Order Code

Example: XTB1XD30 613

XT Crinion Open TableB1 Base componentsXD Beam truss for dual table30 Depth613 Finish

Specifications

Beam trusses are available in allstandard painted finishes.

Application Notes

Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. After selecting beams andleg kits, specify trusses betweenbeams.

Specify beam trusses adjacent toeach end leg and at eachworksurface junction.

For 24�D tables specify top channelsupport instead of truss.

Beam trusses with no top channelsupport must be specified incombination with intermediate legsplanned other than at worksurfacejunctions (as for cable infeedshrouds).

Knoll Office Tables

44

Worksurface supportcantilever and mid span support

description w d h pattern number P1/P2 P3

Cantilever, fixed height 30� or 36� D 3� 24� 9� XTB1FC ( ) $209. $218.

Cantilever, fixed height 24� D 3� 19� 9� XTB1FC24 ( ) 209. 218.

Cantilever, adjustable height 30� or 36� D 3� 24� 9� - 12� XTB1AC ( ) 230. 243.

Cantilever, adjustable height 24� D 3� 24� 9� - 12� XTB1AC24 ( ) 230. 243.

Mid span support 2 2 8 XTB1MB ( ) 99. 104.

Order Code

Example: XTB1FC 118

XT Crinion Open TableB1 Base componentsFC Fixed height cantilever118 Finish

Specifications


48�worksurfaces: sharedcantilevers each end or twoadjustable per worksurface.

60� and 72� worksurfaces: sharedcantilevers each end plus mid spansupport or two adjustablecantilevers inset 8�.

96�worksurfaces: sharedcantilevers at ends plus one incenter or three adjustablecantilevers.

96�x 24� with hinged door: sharedcantilever each end plus two midspan supports.

96�x 30� with hinged door: sharedcantilever each end plus 24�dcantilever as center support.

96�x 36� with hinged door: sharedcantilever each end plus 24�, 30�or 36�d cantilever as center support.

Application Notes

Cantilever brackets are required tosupport each end of worksurfaces.

Brackets can be positioned at endsof worksurface, or inset at legs orfloorstanding pedestal locations.

Fixed height cantilevers can beshared between adjacentworksurfaces. Mid span supportbracket must be specified forworksurface spans exceeding 4’.

Fixed height cantilever supportsworksurface at 281/2� H.

Adjustable cantilevers enableworksurfaces to be set at 27�, 273/4�,281/2�, 291/4� or 30� H.

Knoll Office Tables

45

Cri

nion

Ope

nTa

ble

Worksurface supportlinking plate and cantilever for end counters

description w d h pattern no. P1/P2 P3

Cantilever for end counters, fixed height 3� 19� 9� XTB1FCEND ( ) $209. $218.

Cantilever for end counters, adjustable height 3� 19� 9� - 12� XTB1ACEND ( ) 230. 243.

Worksurface linking plate XTB1LP 28.

Order Code

Example: XTB1FCEND 613

XT Crinion Open TableB1 Base componentsFC Fixed height cantileverEND for end counter613 Finish

Specification


Application Notes

Cantilever brackets are required tosupport each end of worksurface.

Brackets attach to inserts on theoutside face of end legs for endcounters.

Fixed height cantilever supports forend counter at 281/2� H.

Adjustable cantilevers for endcounter enables end counter to beset at 281/2�, 291/4� or 30� H.

A linking plate is recommended tojoin adjacent worksurfaces that areindependently supported at thesame height. Specify two linkingplates at the junction of twoworksurfaces, or four total for eachend counter to two worksurfaces. Alinking plate is not required whereadjacent tops are supported by ashared fixed height cantileverbracket, as with complete fixedheight base assemblies. Linkingplates are recommended forcomplete adjustable height baseassemblies in which tops are set atthe same height.

Knoll Office Tables

46

Modular Raceway2 + 2 eight-wire Raceway with covers

description type h w d pattern number list price

Dual raceway, two power + two data outlets eachside

4� 30� 2� XTR1E30D ( ) $273.

Dual raceway, four power + two data outlets eachside

4� 42� 2� XTR1E424D ( ) 392.

Flat end cover XTR1FE ( ) 23.

Extended end cover XTR1EE ( ) 23.

Single sided racewaytwo power + two data outlets one side

4� 30� 2� XTR1E30S ( ) 273.

Single sided racewayfour power + two data outlets one side

4� 42� 2� XTR1E424S ( ) 392.

Order Code

Example: XTR1E424D 613

XT Crinion Open TableR1 RacewayE Eight wire system42 Width4 Extra outletsD Dual Raceway613 Finish

Specifications

Eight wire 2+2 has two sets ofcircuits, each set with a separateground and neutral.


Covers have two openings fordata/com outlet modules(Decora-size, specified separately).

Applications notes

Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.

Each raceway requires four or eightduplex outlets, on any of fourcircuits.

Jumpers connect power from oneraceway to another.

To join power between 30�raceways: specify 30� jumper for60� desks and specify 42� jumperfor 72� desks.

To join power between 42�raceways: specify 18� jumper for60� desks and 30� jumper for 72�desks.

Flat end covers enclose the end of araceway at the end of a table.

Extended end covers enclose theend of a raceway at the end of atable where power infeed is located.

Specify outlet fillers separately forunused outlet openings.

Knoll Office Tables

47

Cri

nion

Ope

nTa

ble

Modular Raceway2 + 2 eight-wire Raceway components


Modular infeed XTR1EPI $206.

NYC infeed kit XTR1EPH 471.

Jumper 18� XTR1EJ18 95.30� XTR1EJ30 108.42� XTR1EJ42 124.

Duplex outlet Circuit A XTR1DA 35.Circuit B XTR1DB 35.Circuit X, orange XTR1DXO 40.Circuit Y, orange XTR1DYO 40.

Outlet filler Set of 10 XTR1OF 29.

PDC module extension kit Set of 10 XTR1PDCX 120.

Compact Power Module XTR1ECPM ( ) 508.

Order Code

Example: XTR1EJ18

XT Crinion Open TableR1 RacewayE Eight wireJ Jumper18 Width

Specifications

Eight wire 2+2 has two sets ofcircuits, each set with a separateground and neutral.

Application Notes


Each raceway requires four or eightduplex outlets, on any of fourcircuits.

Power infeed includes pigtail forconnection to building power supplyand connector to either end of anyraceway.

NYC infeed kit includes junctionbox that mounts to inside face ofbeams in table base.

Jumper length is difference betweenworksurface width and specifiedraceway width.

Compact power module is designedto supply power outlets underextended end counter worksurfaces,or additional outlets under desks.

Compact power module can besuspended from top channel orattached to inside face of beams.

Each face of compact power moduleaccepts two duplex outlets.

Knoll Office Tables

48

Modular Raceway3 + 3 ten-wire Raceway with covers



4� 30� 2� XTR1T30D ( ) $286.


4� 42� 2� XTR1T424D ( ) 405.




4� 30� 2� XTR1T30S ( ) 286.


4� 42� 2� XTR1T424S ( ) 405.

Order Code

Example: XTR1T424D 613

XT Crinion Open TableR1 RacewayT Ten wire system42 Width4 Extra outletsD Dual Raceway613 Finish

Specifications

Ten wire 3+3 has two sets of threecircuits, each set with a separateground and neutral.



Application Notes


Each raceway requires four or eightduplex outlets, on any of sixcircuits.







Knoll Office Tables

49

Cri

nion

Ope

nTa

ble

Modular Raceway3 + 3 ten-wire Raceway components

description type h w d pattern number list pricing

Modular infeed XTR1TPI $231.

NYC infeed kit XTR1TPH 471.

Jumper 18� XTR1TJ18 108.30� XTR1TJ30 124.42� XTR1TJ42 143.

Duplex outlet Circuit A XTR1DA 35.Circuit B XTR1DB 35.Circuit C XTR1DC 35.Circuit X, orange XTR1DXO 40.Circuit Y, orange XTR1DYO 40.Circuit Z, orange XTR1DZO 40.


PDC module extension kit Set of 10 XTR1PDCX 120.

Compact Power Module XTR1TCPM ( ) 523.

Order Code

Example: XTR1TJ18

XT Crinion Open TableR1 RacewayT Ten wireJ Jumper18 Width

Specifications

Ten wire 3+3 has two sets of threecircuits, each set with a separateground and neutral.

Application Notes









Knoll Office Tables

50

Modular Raceway4-4-2 ten-wire Raceway with covers



4� 30� 2� XTR1X30D ( ) $301.


4� 42� 2� XTR1X424D ( ) 425.


4� 30� 2� XTR1X30S ( ) 301.


4� 42� 2� XTR1X424S ( ) 425.

Order Code

Example: XTR1X424D 613

XT Crinion Open TableR1 RacewayX Ten wire 4-4-242 Width4 Extra outletsD Dual Raceway613 Finish

Specifications

Ten wire 4-4-2 has four circuitseach with a separate neutral, plus aground wire for circuit 1 and 2 andanother ground for circuit 3 and 4.



Application Notes









Knoll Office Tables

51

Cri

nion

Ope

nTa

ble

Modular Raceway4-4-2 ten-wire Raceway components


Modular infeed XTR1XPI $243.

NYC infeed kit XTR1XPH 494.

Jumper 18� XTR1XJ18 113.30� XTR1XJ30 130.42� XTR1XJ42 148.

Duplex outlet Circuit 1 XTR1D1 37.Circuit 2 XTR1D2 37.Circuit 3 XTR1D3 37.Circuit 4 XTR1D4 37.

Compact Power Module XTR1XCPM ( ) 523.

Order Code

Example: XTR1XJ18

XT Crinion Open TableR1 RacewayX Ten wire 4-4-2J Jumper18 Width

Specifications

Ten wire 4-4-2 has four circuitseach with a separate neutral, plus aground wire for circuit 1 and 2 andanother ground for circuit 3 and 4.

All duplex outlets are black.

Application Notes









Knoll Office Tables

52

Hardwire Raceway



4� 30� 2� XTR1H30D ( ) $595.




Order Code

Example: XTR1H30D 613

XT Crinion Open TableR1 RacewayH Hard wire system30 WidthD Dual Raceway613 Finish

Specifications


Hardwired raceway components aredesigned for use in City of Chicagoinstallations.

Covers have two openings fordata/com outlet modules(Decora-size, by others).

Application Notes


Dual raceways are code-approvedboxed with openings for two or fourduplex outlets on each face, plustwo additional openings fordata/communications faceplates oneach face. A continuous horizontalmetal septum divides power wiresand connections from data andcommunications cables. Eachraceway requires Decora-typearchitecturual power outlets,internal wiring and connectingcables, supplied by electricalcontractor.

Flat end covers enclose the racewayat the end of a table. Extended endcovers provide an opening on theunderside to permit cables to enterthe raceway.

Specify outlet filler plates forunused outlet openings. SpecifyPDC extenders to create spacebehind data/com for cabledistribution inside dual raceway.

Knoll Office Tables

53

Cri

nion

Ope

nTa

ble

Cable tray and cable clips

description table size w d pattern number list price

Cable trays, leg position, pair 5’, 30�D 53� 1� XTCT6030LD ( ) $247.5’, 36�D 53� 4� XTCT6036LD ( ) 337.6’, 30�D 65� 1� XTCT7230LD ( ) 268.6’, 36�D 65� 4� XTCT7236LD ( ) 391.

Cable trays, full width, pair 5’, 30�D 60� 1� XTCT6030D ( ) 247.5’, 36�D 60� 4� XTCT6036D ( ) 337.6’, 30�D 72� 1� XTCT7230D ( ) 268.6’, 36�D 72� 4� XTCT7236D ( ) 391.

Data tray kit 42� XTDT42 ( ) 174.

Data + excess cable tray kit 42� XTDTX42 ( ) 288.

Truss cable clips, set of 25 XTR1TCC25 15.

Beam cable clips, set of 50 XTR1BCC50 230.

Random attachment kit, set of 10 XTB1RAK 80.

Order Code

Example: XTCT7230D 613

XT Crinion Open TableCT Cable tray72 Width30 DepthD Dual table613 Finish

Specifications

Cable trays and Data tray kits areavailable in all standard paintfinishes.

Applications notes

Cable trays are optional kits tomanage cables on each side of dualtable bases. Specify cable trays forleg position at each end of the table.Specify cable trays, full width forother positions.

Data tray kit provides 3� widehorizontal open cable tray directlybelow either 30� or 42�W racewaymodule (at center of 60� or 72�desks). Data + excess tray kitprovides two open trays below eitherraceway module, one 3�W and one5�W.

Truss cable clips manage cablesbetween raceway. Specify 2 clipsper truss (one set of 10 for each fivetrusses).

Beam cable clips manage cablesalong the inside faces of each beamset.

Random attachment kit is a set often M8 slot nuts for attachingvarious products to the CrinionOpen Table beams or top channel.Specify appropriate M8 screwsseparately.

Knoll Office Tables

54

Beam mounted cable trays and cable baskets

description application w d h pattern no. list

Beam mounted cable tray 24�D tables 18� 2� 3/4� XTBT18 ( ) $79.24�D tables 24� 2� 3/4� XTBT24 ( ) 88.24�D tables 36� 2� 3/4� XTBT36 ( ) 96.24�D tables 48� 2� 3/4� XTBT48 ( ) 105.24�D tables 60� 2� 3/4� XTBT60 ( ) 113.

Cable basket, 10’ 120� 8� 1� XTWB120 428.

Cable basket hangers From truss 30/36D only XTWTX ( ) 68.

From truss at infeed shroud XTWTBSLIK ( ) 209.

From main beam, 24D only XTWTB ( ) 68.

From top channel, 30/36D only XTWTC ( ) 89.

Order Code

Example: XTBT36 118

XT Crinion Open TableBT Beam mounted cable

tray36 Width118 Paint finish

Specifications

Beam mounted cable trays areavailable in any standard paintedfinish.

Cable basket is zinc metal finishonly.

Basket hangers can be specified inany standard painted finish.

Application Notes

Beam mounted cable trays may beinserted in slots on either face ofCrinion Open Table main beams. On24�D dual or single sided tablesbeam mounted cable trays are theonly option for cable managementother than the shallow channel ontop of the beam or a cable basket.On 30�D and 36�D tables beammounted trays may complementother cable tray options.

Beam mounted cable trays must besegmented to fit between cantileverand midspan support brackets.

For 48�W worksurfaces with sharedcantilevers specify 36�W trays.For 60�W worksurfaces with sharedcantilevers and midspan supportsspecify 24�W trays adjacent to endlegs specify 18�W trays.

For 72�W worksurfaces with sharedcantilevers and midspan supportsspecify 24�W trays.

For 96�W worksurfaces specify36�W trays between supports.Specify 48�W trays for additionalcable management between trusseson the inside face of beams on dual30�D and 36�D tables with 60�worksurfaces.Specify 60�W trays on the insideface of beams on dual 30�D and36�D tables with 72�Wworksurfaces.

Cable basket is suspended belowthe center of dual tables instead ofor in addition to cable trays. Cablebasket offers the most flexibility formanaging large bundles of cablesand for entering or exiting the tray atany point. Cable basket ships in 10’lengths and is cut to size in field.Specify cable basket hangersseparately. Each hanger cansuspend one end of a tray or twoadjacent trays. Hanger from trussesis for 30� or 36�D dual or singlesided tables. Hanger from mainbeam is for 24�D dual tables only.Hangers from top channel are for30� or 36�D dual tables only.

Knoll Office Tables

55

Cri

nion

Ope

nTa

ble

Center screensAcrylic, slatwall, combination, marker or veneer surface

description appl. w d h pattern no.Opal

acrylic

Trans.acrylic /Marker slatwall

Comb.acrylic /slatwall V1 V2 V3

Center screen to 43� H 48� 48� 11/4� 14� XTCS1 4814 ( )( )( ) $835. $863. $1,326. n/a $1,152. $1,262. $1,478.60� 60� 11/4� 14� XTCS1 6014 ( )( )( ) 1,095. 1,149. 1,440. n/a 1,246. 1,375. 1,648.72� 72� 11/4� 14� XTCS1 7214 ( )( )( ) 1,152. 1,207. 1,556. n/a 1,309. 1,459. 1,784.

acrylic shown

Center screen to 43� Hadjacent to end screen

48� 47� 11/4� 14� XTCS1 4714 ( )( )( ) 835. 863. 1,326. n/a 1,152. 1,262. 1,478.60� 59� 11/4� 14� XTCS1 5914 ( )( )( ) 1,095. 1,149. 1,440. n/a 1,246. 1,375. 1,648.72� 71� 11/4� 14� XTCS1 7114 ( )( )( ) 1,152. 1,207. 1,556. n/a 1,309. 1,459. 1,784.

acrylic shown

Center screen to 50� H 48� 48� 11/4� 21� XTCS1 4821 ( )( )( ) 979. 1,023. 1,556. 1,440. 1,263. 1,407. 1,718.60� 60� 11/4� 21� XTCS1 6021 ( )( )( ) 1,267. 1,349. 1,729. 1,672. 1,359. 1,533. 1,922.72� 72� 11/4� 21� XTCS1 7221 ( )( )( ) 1,326. 1,406. 1,902. 1,786. 1,408. 1,610. 2,081.

slatwall shown


48� 47� 11/4� 21� XTCS1 4721 ( )( )( ) 979. 1,023. 1,556. 1,440. 1,263. 1,407. 1,718.60� 59� 11/4� 21� XTCS1 5921 ( )( )( ) 1,267. 1,349. 1,729. 1,672. 1,359. 1,533. 1,922.72� 71� 11/4� 21� XTCS1 7121 ( )( )( ) 1,326. 1,406. 1,902. 1,786. 1,408. 1,610. 2,081.

combination shown

Order Code

Example: XTCS16014A O 111

XT Crinion Open TableCS1 Center screen60 Width14 HeightA SurfaceO Opal111 Frame finish

Specifications

Acrylic surface is AO opal or ATtranslucent.

For Marker surface both sidesspecify suffix M.

For Slatwall screens specify slatwalland frame finish.

For combination acrylic/slatwallscreens specify suffixes CO (opal) orCT (translucent), slatwall and framefinish.

Slatwall surface is available in (AA)or any standard painted finishexcept 613 Silver.

For veneer surface specify suffix Vand finish code from list on CrinionOpen Table.

Frame is clear anodized aluminumor any standard paint finish except613 Silver.

Application Notes

Center screens mount to continuouschannel at center of tables. Specify14� H screens for a 42� horizon.Specify 21� H screens for a 49�horizon. Horizons are maintainedregardless of worksurface height.

Combination screens include 14�high slatwall with acrylic above.

Center screens include mountinghardware for standard top channelonly.

Center screens adjacent to endscreens allow space for dual orsingle sided end screens.

Slatwall screens require buttressesto support Knoll Extra flat screenmonitor arm. Specify one buttressper monitor arm, up to fourbuttresses per screen.

Slatwall screens will support flatpanel monitor arms with varyingweight limitations based onmounting and application. Pleaserefer to the KnollExtra price list forcomprehensive mounting andweight limitation information byapplication.

Veneer grain direction is horizontal.

Marker surface has wood core.

Knoll Office Tables

56

Center screensTackable fabric surface

description application w d h pattern no. 10 15 20 30 35 40 45

Center screen to 43� H 48� 48� 11/4� 14� XTCS1 4814F ( )( )( ) $882. $899. $902. $922. $936. $936. $968.60� 60� 11/4� 14� XTCS1 6014F ( )( )( ) 963. 984. 988. 1,011. 1,029. 1,029. 1,069.72� 72� 11/4� 14� XTCS1 7214F ( )( )( ) 986. 1,012. 1,016. 1,045. 1,067. 1,067. 1,114.


48� 47� 11/4� 14� XTCS1 4714F ( )( )( ) 873. 891. 894. 911. 927. 927. 959.60� 59� 11/4� 14� XTCS1 5914F ( )( )( ) 963. 984. 988. 1,011. 1,029. 1,029. 1,069.72� 71� 11/4� 14� XTCS1 7114F ( )( )( ) 986. 1,012. 1,016. 1,045. 1,067. 1,067. 1,114.

Center screen to 50� H 48� 48� 11/4� 21� XTCS1 4821F ( )( )( ) 935. 952. 955. 973. 988. 988. 1,019.60� 60� 11/4� 21� XTCS1 6021F ( )( )( ) 1,043. 1,066. 1,069. 1,091. 1,110. 1,110. 1,150.72� 72� 11/4� 21� XTCS1 7221F ( )( )( ) 1,054. 1,080. 1,085. 1,113. 1,136. 1,136. 1,182.


48� 47� 11/4� 21� XTCS1 4721F ( )( )( ) 935. 952. 955. 973. 988. 988. 1,019.60� 59� 11/4� 21� XTCS1 5921F ( )( )( ) 1,043. 1,066. 1,069. 1,091. 1,110. 1,110. 1,150.72� 71� 11/4� 21� XTCS1 7121F ( )( )( ) 1,054. 1,080. 1,085. 1,113. 1,136. 1,136. 1,182.

Order Code

Example: XTCS16014F20(W2801) AA

XT Crinion Open TableCS1 Center screen60 Width14 HeightF Surface20 Fabric gradeW2801 FabricAA Frame finish

Specifications

1. Tackable fabric surface is suffixF.

2. Select fabric surface finish codefrom list on page Crinion OpenTable.


Fabric is railroaded.

Application Notes

Fabric center screens mount tocontinuous channel at center oftables. Specify 14� H screens for a43� horizon. Specify 21� H screensfor a 50� horizon. Horizons aremaintained regardless ofworksurface height.

Center screens include mountinghardward for standard top channelonly.

Center screens adjacent to endscreens allow space for dual orsingle sided end screens.

Knoll Office Tables

57

Cri

nion

Ope

nTa

ble

Shelves, adapters and buttresses for slatwall screens

description application w d h pattern no. list AA/paint L V1 V2 V3

Display shelf 5�Daluminum only

48� slatwall 45� 5� 1� XT1DS4505 ( ) $256.60� slatwall 57� 5� 1� XT1DS5705 ( ) 287.72� slatwall 69� 5� 1� XT1DS6905 ( ) 310.

Open shelf 9�Dlaminate or veneer only

48� slatwall 45� 9� 1� XT1LS4509 ( )( ) 287. 375. 430. 581.60� slatwall 57� 9� 1� XT1LS5709 ( )( ) 330. 429. 493. 667.72� slatwall 69� 9� 1� XT1LS6909 ( )( ) 374. 485. 557. 752.

Slatwall adapters forapplied wall accessories

24� XT1SA24 ( ) 26.30� XT1SA30 ( ) 31.36� XT1SA36 ( ) 37.42� XT1SA42 ( ) 42.48� XT1SA48 ( ) 47.54� XT1SA54 ( ) 53.60� XT1SA60 ( ) 58.66� XT1SA66 ( ) 63.72� XT1SA72 ( ) 68.

Buttress for slatwall screen XTCS1 SBA ( ) 230.

Order Code

Example: XT1LS5709 118 AA

XT1 Crinion Open TableLS Open shelf57 Width09 Depth118 Shelf finishAA Platform finish

Specifications

Display shelves are anodizedaluminum (AA) or any standardpainted finish except silver.

For open shelves specify anystandard laminate or veneer finish,then platform finish.Shelf platform may be AA or anystandard paint finish except silver.

Slatwall adapters are integral color812 Easy grey or 111 Black only.

Application Notes

Open shelves and display shelvesfor slatwall are designed for use onCrinion Open Table center screenswith slatwall inserts.

Shelves include adapter that snapsinto horizontal channels in slatwall,approximately every 2� vertically.

Shelf width fits either full widthcenter screens or screens adjacentto end screens.

Slatwall adapters enable otherApplied Wall System shelves andaccessories to be mounted toCrinion Open Table slatwall.

Adapter will also fit other Knollsystem slatwalls, such asAutoStrada spine or panels, but useof shelves in these applications maynot comply with ANSI/BIFMAsafety standards foranti-dislodgment.

Knoll Office Tables

58

Side screensAcrylic, Marker or veneer surface

description application w d h pattern no. listOpal

acrylic

Trans.acrylic /Marker V1 V2 V3

Side screen to 43� H 24� D worksurface 22� 11/4� 14� XTSS1 2414 ( )( )( ) $605. $621. $911. $978. $1,077.30� D worksurface 28� 11/4� 14� XTSS1 3014 ( )( )( ) 634. 656. 940. 1,016. 1,143.36� D worksurface 34� 11/4� 14� XTSS1 3614 ( )( )( ) 691. 719. 965. 1,051. 1,206.

acrylic shown

Side screen to 50� H 24� D worksurface 22� 11/4� 21� XTSS1 2421 ( )( )( ) 691. 719. 976. 1,058. 1,200.30� D worksurface 28� 11/4� 21� XTSS1 3021 ( )( )( ) 721. 753. 1,007. 1,103. 1,284.36� D worksurface 34� 11/4� 21� XTSS1 3621 ( )( )( ) 777. 815. 1,035. 1,147. 1,368.

acrylic shown

Side screen brackets ( pair ) postformed edge XTSM1P ( ) 243.squared edge XTSM1S ( ) 173.tapered edge XTSM1K ( ) 173.

Order Code

Example: XTSS13014A O AA

XT Crinion Open TableSS1 Side screen30 Width14 HeightA SurfaceO OpalAA Frame finish

Specifications

1. Specify surfaceA = AcrylicV = VeneerM = Marker

2. For Acrylic surface specifyO = OpalT = TranslucentVeneer surfaces may be anystandard AutoStrada V1,V2 orV3 veneer.Specify veneer finish code fromCrinion Open Table.


Brackets are available in all paintfinishes

Application Notes

Side screens clamp to front andback edge of worksurface at anypoint (except at hinged access door).Specify side screen bracketsseparately. Specify 14� H screensfor a 42� horizon. Specify 21� Hscreens for a 49� horizon. Sidescreens align in height with centerscreens when worksurfaces are setat 283/8� H.


Knoll Office Tables

59

Cri

nion

Ope

nTa

ble

Side screensTackable fabric surface

description application w d h pattern no. list 10 15 20 30 35 40 45

Side screen to 43� H 24� D worksurface 22� 11/4� 14� XTSS1 2414F ( )( )( ) $687. $695. $697. $707. $714. $714. $730.30� D worksurface 28� 11/4� 14� XTSS1 3014F ( )( )( ) 707. 719. 721. 732. 741. 741. 760.36� D worksurface 34� 11/4� 14� XTSS1 3614F ( )( )( ) 728. 741. 757. 767. 767. 767. 792.

Side screen to 50� H 24� D worksurface 22� 11/4� 21� XTSS1 2421F ( )( )( ) 718. 726. 727. 737. 744. 744. 760.30� D worksurface 28� 11/4� 21� XTSS1 3021F ( )( )( ) 748. 758. 760. 772. 781. 781. 801.36� D worksurface 34� 11/4� 21� XTSS1 3621F ( )( )( ) 762. 775. 777. 792. 802. 802. 826.

Side screen brackets ( pair ) postformed edge XTSM1P ( ) 243.squared edge XTSM1S ( ) 173.tapered edge XTSM1K ( ) 173.

Order Code

Example: XTSS13014F20(W2801) 115

XT Crinion Open TableSS1 Side screen30 Width14 HeightF Surface20 Fabric gradeW2801 Fabric115 Frame finish

Specifications



3. Specify frame finish.



Brackets are available in all paintfinishes.

Application Notes

Side screens clamp to front andback edge of worksurface at anypoint (except at hinged access door).Specify side screen bracketsseparately. Specify 14� H screensfor a 43� horizon. Specify 21� Hscreens for a 50� horizon. Sidescreens align in height with centerscreens when worksurfaces are setat 283/8� H.

Knoll Office Tables

60

Return screensAcrylic, Marker or veneer surface


acrylic


Return screen to 43� H 54� 52� 11/4� 14� XTRS1 5414 ( )( )( ) $1,008. $1,062. $1,099. $1,215. $1,449.60� 58� 11/4� 14� XTRS1 6014 ( )( )( ) 1,008. 1,062. 1,113. 1,240. 1,502.66� 64� 11/4� 14� XTRS1 6614 ( )( )( ) 1,008. 1,062. 1,137. 1,271. 1,564.72� 70� 11/4� 14� XTRS1 7214 ( )( )( ) 1,008. 1,062. 1,151. 1,296. 1,616.78� 76� 11/4� 14� XTRS1 7814 ( )( )( ) 1,123. 1,177. 1,363. 1,486. 1,833.

Return screen to 50� H 54� 52� 11/4� 21� XTRS1 5421 ( )( )( ) 1,181. 1,262. 1,205. 1,358. 1,698.60� 58� 11/4� 21� XTRS1 6021 ( )( )( ) 1,181. 1,262. 1,225. 1,395. 1,775.66� 64� 11/4� 21� XTRS1 6621 ( )( )( ) 1,181. 1,262. 1,246. 1,429. 1,849.72� 70� 11/4� 21� XTRS1 7221 ( )( )( ) 1,181. 1,262. 1,266. 1,464. 1,923.78� 76� 11/4� 21� XTRS1 7821 ( )( )( ) 1,326. 1,406. 1,484. 1,664. 2,161.

Side screen brackets ( pair ) postformed edge XTSM1P ( ) 243.squared edge XTSM1S ( ) 173.

Order Code

Example: XTRS16014A O 118

XT Crinion Open TableRS1 Return screen60 Width14 HeightA AcrylicO Opal118 Frame finish

Specifications




Frame is clear anodized aluminum(AA) or any standard paint finishexcept 613 Silver.


Application Notes

Return screens span the depth ofCrinion Open Table worksurfacesand the width of a 30�, 36� or 42�worksurface planned asperpendicular return. Specify 14� Hscreens for 42� horizon. Specify 21�H screens for a 49� horizon. Returns( file tops or AutoStradaworksurfaces) must be at the sameheight as worksurface.

Specify side brackets separately.


Knoll Office Tables

61

Cri

nion

Ope

nTa

ble

Return screensTackable fabric surface


Return screen to 43� H 54� 52� 11/4� 14� XTRS1 5414F ( )( )( ) $838. $859. $863. $883. $899. $899. $936.60� 58� 11/4� 14� XTRS1 6014F ( )( )( ) 845. 866. 870. 894. 911. 911. 952.66� 64� 11/4� 14� XTRS1 6614F ( )( )( ) 862. 885. 890. 916. 935. 935. 978.72� 70� 11/4� 14� XTRS1 7214F ( )( )( ) 867. 893. 898. 928. 946. 946. 996.78� 76� 11/4� 14� XTRS1 7814F ( )( )( ) 998. 1,025. 1,031. 1,061. 1,083. 1,083. 1,136.

Return screen to 50� H 54� 52� 11/4� 21� XTRS1 5421F ( )( )( ) 820. 838. 842. 865. 881. 881. 917.60� 58� 11/4� 21� XTRS1 6021F ( )( )( ) 851. 872. 875. 900. 918. 918. 957.66� 64� 11/4� 21� XTRS1 6621F ( )( )( ) 857. 880. 884. 909. 930. 930. 973.72� 70� 11/4� 21� XTRS1 7221F ( )( )( ) 862. 887. 893. 921. 942. 942. 990.78� 76� 11/4� 21� XTRS1 7821F ( )( )( ) 1,017. 1,045. 1,051. 1,081. 1,104. 1,104. 1,155.


Order Code

Example: XTRS16014F20(W2801) 611

XT Crinion Open TableRS1 Return screen60 Width14 HeightF Surface20 Fabric gradeW2801 Fabric611 Frame finish

Specifications







Application Notes

Fabric return screens span thedepth of Crinion Open Tableworksurfaces and the width of a 30�,36� or 42� worksurface planned asperpendicular return. Specify 14� Hscreens for 43� horizon. Specify 21�H screens for a 50� horizon. Retunsmust be at the same height asworksurface.

Specify mounting bracketsseparately.

Knoll Office Tables

62

Dual end screensAcrylic, Marker or veneer surface


acrylic


Dual end screens to 43� H 24� D dual 48� 11/4� 14� XTES1 4814 ( )( )( ) $750. $776. $1,054. $1,163. $1,380.30� D dual 60� 11/4� 14� XTES1 6014 ( )( )( ) 979. 1,034. 1,148. 1,279. 1,550.36� D dual 72� 11/4� 14� XTES1 7214 ( )( )( ) 1,008. 1,062. 1,212. 1,360. 1,686.

acrylic shown

Dual end screens to 50� H 24� D dual 48� 11/4� 21� XTES1 4821 ( )( )( ) 893. 936. 1,164. 1,309. 1,621.30� D dual 60� 11/4� 21� XTES1 6021 ( )( )( ) 1,152. 1,232. 1,261. 1,434. 1,824.36� D dual 72� 11/4� 21� XTES1 7221 ( )( )( ) 1,181. 1,369. 1,311. 1,511. 1,982.

acrylic shown

Replacement mast Kit acrylic center screen XTSM1C ( ) 98.slatwall center screen XTSM1SLAT ( ) 259.

End screen brackets ( pair ) tapered edgeworksurface

XTSM1KK ( ) 173.


Order Code

Example: XTES16014A O AA

XT Crinion Open TableES1 End screen60 Width14 HeightA SurfaceO OpalAA Frame finish

Specifications






Replacement mast kit for acryliccenter screen is 812 Easy Grey or111 Black.

Application Notes

Dual end screens clamp tofront edge of worksurface on eitherside of table. Specify 14� H screensfor a 42� horizon. Specify 21� Hscreens for a 49� horizon. Sidescreens align with center screenswhen worksurfaces are set at 283/8�H.

Specify end screen bracketsseparately for each sceen.


Knoll Office Tables

63

Cri

nion

Ope

nTa

ble

Dual end screensTackable fabric surface


Dual end screens to 43� H 24� D dual 48� 11/4� 14� XTES1 4814F ( )( )( ) $772. $791. $794. $813. $827. $827. $860.30� D dual 60� 11/4� 14� XTES1 6014F ( )( )( ) 845. 866. 870. 894. 911. 911. 952.36� D dual 72� 11/4� 14� XTES1 7214F ( )( )( ) 867. 893. 898. 927. 946. 946. 996.

Dual end screens to 50� H 24� D dual 48� 11/4� 21� XTES1 4821F ( )( )( ) 834. 852. 857. 874. 890. 890. 922.30� D dual 60� 11/4� 21� XTES1 6021F ( )( )( ) 906. 929. 933. 956. 974. 974. 1,014.36� D dual 72� 11/4� 21� XTES1 7221F ( )( )( ) 919. 944. 948. 977. 999. 999. 1,045.

Replacement mast Kit acrylic center screen XTSM1C ( ) 98.slatwall center screen XTSM1SLAT ( ) 259.

End screen brackets ( pair ) tapered edgeworksurface

XTSM1KK ( ) 173.


Order Code

Example: XTES16014F20(W2801) 112

XT Crinion Open TableES1 End screen60 Width14 HeightF Surface20 Fabric gradeW2801 Fabric112 Frame finish

Specifications







Replacement mast kit is 812 EasyGrey or 111 Black.

Application Notes

Dual end screens clamp tofront edge of worksurface on eitherside of table. Specify 14� H screensfor a 43� horizon. Specify 21� Hscreens for a 50� horizon. Sidescreens align with center screenswhen worksurfaces are set at 283/8�H.


Knoll Office Tables

64

Single sided end screenAcrylic, Marker or veneer surface


acrylic


Single sided end screens to 43� H 24� D Single sided 241/2� 11/4� 14� XTES1 2414 ( )( )( ) $605. $621. $911. $978. $1,077.30� D Single sided 301/2� 11/4� 14� XTES1 3014 ( )( )( ) 634. 656. 940. 1,016. 1,143.36� D Single sided 361/2� 11/4� 14� XTES1 3614 ( )( )( ) 691. 719. 965. 1,051. 1,206.

acrylic shown

Single sided end sceen to 50� H 24� D single sided 241/2� 11/4� 21� XTES1 2421 ( )( )( ) 691. 719. 976. 1,058. 1,200.30� D single sided 301/2� 11/4� 21� XTES1 3021 ( )( )( ) 721. 753. 1,007. 1,103. 1,284.36� D single sided 361/2� 11/4� 21� XTES1 3621 ( )( )( ) 777. 815. 1,035. 1,147. 1,368.

acrylic shown

Single sided end screenbrackets ( set )

postformed edge XTSM1PC ( ) 174.square edge XTSM1SC ( ) 128.tapered edge XTSM1KC ( ) 128.

Order Code

Example: XTES13614A O 114

XT Crinion Open TableES1 End screen36 Width14 HeightA SurfaceO Opal114 Frame finish

Specifications






Application Notes

Single sided end screens clamp tofront edge of worksurface and attachto top of channel. Specify 14� Hscreens for a 42� horizon. Specify21� H screens for a 49� horizon.Side screens align with centerscreens when worksurfaces are setat 283/8� H.



Knoll Office Tables

65

Cri

nion

Ope

nTa

ble

Single sided end screenTackable fabric surface


Single sided end screens to 43� H 24� D Single sided 241/2� 11/4� 14� XTES1 2414F ( )( )( ) $687. $695. $697. $707. $714. $714. $730.30� D Single sided 301/2� 11/4� 14� XTES1 3014F ( )( )( ) 707. 719. 721. 732. 741. 741. 760.36� D Single sided 361/2� 11/4� 14� XTES1 3614F ( )( )( ) 728. 741. 757. 767. 767. 767. 792.

Single sided end sceen to 50� H 24� D single sided 241/2� 11/4� 21� XTES1 2421F ( )( )( ) 718. 726. 727. 737. 744. 744. 760.30� D single sided 301/2� 11/4� 21� XTES1 3021F ( )( )( ) 748. 758. 760. 772. 781. 781. 801.36� D single sided 361/2� 11/4� 21� XTES1 3621F ( )( )( ) 762. 775. 777. 792. 802. 802. 826.

Single sided end screenbrackets ( set )

postformed edge XTSM1PC ( ) 174.square edge XTSM1SC ( ) 128.tapered edge XTSM1KC ( ) 128.

Order Code

Example: XTES13614F20(W2801) 111

XT Crinion Open TableES1 End screen36 Width14 HeightF Surface20 Fabric gradeW2801 Fabric111 Frame finish

Specifications




Frame is clear anodized aluminumor any paint finish except 613Silver.



Application Notes

Single sided end screens clamp tofront edge of worksurface and attachto top of channel. Specify 14� Hscreens for a 43� horizon. Specify21� H screens for a 50� horizon.Side screens align with centerscreens when worksurfaces are setat 283/8� H.


Knoll Office Tables

66

Frameless glass Add upfor Crinion Open Table

description w d h pattern numberclear

tempered powder

Frameless glass Add ups 48� 1/2� 12� XAUA 1248G ( )( ) $514. $534.60� 1/2� 12� XAUA 1260G ( )( ) 628. 654.72� 1/2� 12� XAUA 1272G ( )( ) 742. 771.

Order Code

Example: XAUA 1248G TEMP AA

X Crinion Open TableAUA Frameless addup screen48 Width12 HeightG GlassTEMP FinishAA Base finish

Specifications

Add up type:G Glass

Glass add-ups are available with thefollowing glass options:TEMP Clear temperedGL13 Powder

Specify base finish:AA anodized aluminum and allstandard painted finishes except613 Silver.

Application Notes

Frameless glass addups for CrinionOpen Table match those availablefor the AutoStrada spine.

Tempered glass in clear or poweredfinish is1/2� thick. Base frame issecured with bolts to top channel forframeless glass addups.

Frameless addups cannot bemounted to standard top channelincluded with base assemblies.

Base extrusion is clear anodizedaluminum or any standard paintedfinish except Silver.

Knoll Office Tables

67

Cri

nion

Ope

nTa

ble

Morrison Network privacy screensmounting kit for Crinion Open Table

description w d h pattern number list price

Fabric screen mounting kit XTPS1MZKIT $117.

Order Code

Example: XTPS1MZKIT

XT Crinion Open TablePS1 Privacy ScreenMZ FabricKIT Kit

Specifications Applications notes

Crinion Open Tables are designed toaccept Morrison Network privacyscreens with fabric screen mountingkit. Screens are tackable fabric, 3/4�thick, in widths corresponding toCrinion worksurfaces 48�, 60� or72� wide. Specify screensMZ1-B4815F, MZ1B6015F orMZ1B7215F.

Specify one mounting kit for eachscreen. Fabric screen mounting kitsinclude two uprights that fasten tothe top channel at any point.Uprights slide into internalchannels in screens. Fabric screensdo not align in height with acrylicprivacy screens.

Knoll Office Tables

68

General Specifications

Panels and PartsAll panels have a concealedperimeter frame 11/2� x 2�. Panels 42�wide and wider, other than windowpanels, have additional interiorbracing.

Panel bases are 33/8� or 63/16� highwith levellers at both ends. Snap-inpanel side plates are provided with atleast two lift-outs on each side ofpanels 30� to 48� wide; one lift-outon each side of panels 24� wide,unless no knockout option isrequested (see Planning Guide fordetails). Acoustical panels can bespecified with fabric on either side orfabric on one side and wood orlaminate on the other. A laminatedboard septum is covered on bothsides with acoustical fiberglass forfabric/fabric panels providing anNRC of .80 and STC of 22.

Window panels utilize tempered4mm thick glass. Panel-to panelconnection is accomplished with asteel connector bar, which engageslocking points on panel perimeterframes and is drawn tight by meansof a screw mechanism located at thetop of the bar. Each panel is suppliedwith one connector, which also servesas an anchor point for panel-hungsupport brackets. Panel-to-wallconnection is accomplished with aPVC extrusion which connects twoaluminum extrusions - one screwedto the wall, the other attached to thepanel perimeter frame. Stackingpanels are provided with a fastenerfeature which allows individual 15�and 30�H sections to be added orremoved without disturbing the panelrun. In all cases a leveller adjustablepanel must first be specified withadditional sections added on toprovide height adjustment. A post isrequired at panel intersections, whena panel run changes direction or asin the case of the straight line postwhen it is required to make up anextra 21/2� to match another panelrun. Top trim utilizes a PVCextrusion for a press fit into the panelperimeter frame. End trim is screwedto a steel connector bar which locksit to the panel perimeter frame.

All tiled panels are constructedusing the same frame as monolithicpanels and also use the same internalcomponents. However, the insertstructure has been altered to allowtiles 15�H to be independentlyapplied to the panel, thus creating atiled appearance. Tiled panels canbe stacked on.

Reff panels can be joined to existingSystem 6, Classic System 6, andSegmented panels with a conversionkit.

Beltway electrical panel is a Reffpanel altered to provide access toelectrical and communication portsat a desk height level.

Note:Line drawings in this price list arepurely for quick productidentification without any form ofdetail. One must not use the pricelist line drawings to satisfyproduction dimensions, shape orsupport options. Refer to PlanningGuide for detailed productinformation.

Wood and Laminate ComponentsTops are 13/4� or 11/4� thick.Undersides are pre-drilled withinserts and routed to acceptpedestals and connecting hardware.

Flush and cantilever top assemblieshave 11/16� thick endpanels, and 15/16�thick backpanels. Recessed topassemblies have 11/16� thickendpanels and a 15/16� thickbackpanel.

Pedestals are supplied with metalchannels on the top to attach thepedestal to the underside of aworksurface.

Drawer boxes can be specified inboth metal or wood with dovetailedjoinery. Hinge doors use concealed,adjustable hinges.

All components are veneered andfinished on all sides unless otherwisespecified. Edges are banded with 1/8�PVC or 3/32� solid wood. 13/4�laminate tops are postformed frontand back. 2� Deep solid waterfalledge optional.

LocksAll pedestals and cabinets withdrawers are supplied with a ganglockmechanism in place. In addition,cabinets with drawers have a drawerinterlock anti-tip device designed toprevent the opening of a seconddrawer when one is already open.Drawer fronts and door fronts arerouted to receive the lock itself.Locks for drawers in pedestals andcabinets can be retro-fitted. Doorlocks are identical in shape to drawerlocks, but these components are notpre-routed and therefore, lockscannot be retro-fitted.

Reff lockcores must be specifiedseparately. Reff lock mechanisms areblack and feature a removable corefor easy replacement.

LevellersAll endpanels, backpanels (exceptrecessed), floor pedestals andcabinets have 11/2� high levellers.

LightingShelves and overhead cabinets havea bottom recess to house the tasklight. The task light can be easilyretro-fitted.

Power is conveyed to the task lightfixture by a 9� long cable. The lowerend of the cable can be plugged intoa panel base receptacle.

GrommetsGrommets are optional (except wherenoted). Tops up to 48� wide have onegrommet. Tops wider than 48�include two grommets. See PlanningGuide for locations.

All dimensions in this price list arefor representative purposes only.For accurate build dimensions orfactory drawings, please callCustomer Services.

The Reff electrical is listed for use inthe Reff panel system underUL1286.

Reff ‘‘Floor to Ceiling’’ is a modular,panel-based system. The ceilingchannel should not be used as asupport for the panel (see supportsection of specification guide).

Because local building andelectrical codes vary and may havespecial requirements for modularwalls that touch, approach or areattached to the ceiling, customersand installers should have thespecifications reviewed andapproved by building inspectorsand a qualified electricalcontractor. To the extent localcodes and practices dictate, Knollis available to help withcustomized solutions.

Orders with 50 or fewer locksrequired with no specific keyingrequests will be sent randomly keyedby the factory without warning.

FinishingAll Reff natural wood veneer andTechwood components are stainedand sealed using a state of the artpolyurethane finishing process.Polyur� provides superior resistanceto solvents, stains, abrasion and heat.Each component is coated and curedwith ultraviolet light for a durable,lasting wood surface.

Natural veneers are all hand selectedto best showcase the beauty ofnatural grain and to Knoll’smeticulous color and grainstandards.

Every effort is made to ensure thatKnoll Reff veneers are the best thatcan be sourced in quality of color,consistency and size. Naturalvariations of wood are held in highregard and are not considered to bedefects. Natural variations are notsubject to warranty. The naturalprocess of color change in real woodproducts is part of the uniquecharacter and beauty of this material.Knoll expects wood to patina overtime and does not warranty colorchange.

Techwood is a genuine real woodproduct, enhanced by technology toprovide color and grain consistency.Techwood finishes are available inopen and closed pore options. Openpore techwood finishes are notavailable on waterfall edge tops.Waterfall edge tops can be specifiedwith closed pore V1 and V2 finishesonly.

FSC (Forest Stewardship Council)certified materials available uponrequest.

Knoll Office Tables

69

Ref

f

Optional edge details

Reff System incorporates optionalworksurface edge details.Wood edges are crafted from selecthardwoods and are finished withKnoll’s industry leadingpolyurethane Reff Finish.Optional for worksurface tops listedon pages 0 through 81.

It is not necessary to plan separatelyfor edges that �mate�; this feature isengineered into appropriate productswhen used as intended.

Edge detail to be specified by oneof the following codes:A - AlphaB - BetaC - ChiD - DeltaE - EpsilonF - PhiG - Gamma

Knoll Office Tables

70

Reff finish options

Wood Finishes:V1 Techwood Closed Pore

Y316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 Wenge *Y342 Medium Teak *Y343 Dark Grey Oak *Y344 EspressoY851 Black OakY811 NaturalY821 Blond MapleY831 Light Cherry*Not available on Reff optionalEdges.

V1 - Techwood Closed PoreSurface with matching synthethicedge:Options applicable for 11/4� thickworksurfaces with standard flat edgeonly.

S319 CherryS316 MapleS323 Medium Walnut

V2 Natural VeneerClosed Pore

V312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown Cherry(all above V2’s are flat cut)V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown Oak(all V2 Oak’s are rift cut)V439 Straight Anigre

V2 Natural Veneer with syntheticedgeOptions applicable for 11/4� thickworksurfaces with standard flat edgeonly.

Flat Cut:

R319 Medium CherryR315 Light CherryR316 Light MapleR323 Medium WalnutR415 Peacock Green WalnutR417 Old English WalnutR421 Chalk OakR427 Brown OakR312 Bronze Cherry

V3 Exotic VeneerV512 Figured AnigreV513 Graphite Oak

(Rift cut)V514 MakoreV515 Figured SycamoreV517 Natural Sapele(all above are quarter cut)

Glass Options:

TEMP Clear Tempered (G1)

Architectural Glass Options: (G2)

GL13 PowderGL8 WaferGL6 Block Matrix

LocksBlack only

LaminateMatching edge band unless notedotherwise

111 Jet Black114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice121 Micro Grey with 114


Pumice edge band123 Brushed Grey with 128

Fog edge band124 Medium Chery125 Natural Maple126 Natural Cherry127 Walnut128 Fog129 Micro Sand with 119

Pumice edge band

Paint Classifications:Upcharge as applicable for paintclass noted on applicable productpages

P1

111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey

P2

611 Beige Mist Metallic612 Medium Metallic Grey

P3

118 Bright White613 Silver

See matrix next page for finishesapplicable by component

Mixed Finishes: (where applicablefor work surfaces only)To order mixed finishes, enter fourdigit finish code as follows:




12 for V31216 for V316, Y316Y9 for Y319Y3 for Y32326 for Y32627 for Y32729 for Y32943 for V43345 for V41546 for V43647 for V41748 for V41849 for V43952 for V51253 for V51354 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V427



Knoll Office Tables

71

Ref

f

Reff finish options

Fabric Options

Grade 10Bailey II (W359) øBroadcloth (W288)Foundation (W351)Growth Spurt (W692)Newbury (W812) øSolid Crepe (W257) øSymbolic Detail (W693)Tailor Made (W133)Versatility (W432)

Grade 15Regency (W210)

Grade 20Banyan (W443)Bauhaus Block (W296A)Circle Line (W1146)Clarity (W281)Criss Cross (W305)Devon (W809) øLabyrinth (W352)Melbourne (W228)Outback (W229)Reflect (W884) øResolution (W280)Walkabout (W230)Weave Three (W298)

Grade 30Basket Draft (W249)Flow (W565)Harmony (W232)Interknit (W1090)Match Point (W1145)Micro (W465)*Progression (W403)Raku Cloth (W566) øRelay (W1020) �

Grade 40Clarkson (W1218)Ornament (W1078)Palladium (W1030) �

Sennit (W337)Spinoff Nuance (W319)

Grade 45Casual Elegance (W920)Dristi (K872)* ø

*with backing only

� Monolithic panels and tackboardsonly

ø May not be available in all colors.

The following textiles are approved foruse on Reff panels. Consult Knollrepresentative for pricing:

Grade 50Knoll Hopsack (K1206)Ricochet (W498)

Grade 55Knoll Felt (K1207)Transition (W816)

Customers Own MaterialPrices for panels that are to bemanufactured with a customersupplied fabric will follow Grade 10panel pricing.

COM fabrics are subject to a testingcharge prior to acceptance for use onReff panels. Panels bearing COMfabrics are subject to extendedleadtimes. It is the responsibility ofthe customer’s purchasing agent toensure COM fabric is supplied fortesting and manufacturing. Delays inreceiving COM fabric formanufacturing will result inrescheduled delivery dates.

When specifying panel/fabrics usethe following format to denotelocation on a tiled panel.Side 1 Side 21E Top of Panel 2E1D 2D1C 2C1B 2B1A Bottom of Panel 2A

(Side 1 is always the inside of theworkstation.)

Panels with beltway one side:assume the beltway is on SIDE 1 ofthe panel.

Non-Wood FinishesPanel Tiles,Worksurfaces & Panel Top Trims Panel Base Panel Beltway Leg and Interaction

Finishes Components Window Frames Side Plates Side Plates* Bases Style Legs Pulls GrommetsJet Black 111 111 111 111 111 111 111 111Dark grey n/a 113 113 113 113 113 n/a 113Medium grey n/a 115 115 115 115 115 n/a 115Soft grey 117 117 117 117 117 117 n/a 117Folkstone grey 114 114 114 114 114 114 n/a 114Pumice 119 119 119 119 119 119 n/a 119Sandstone n/a 116 116 116 116 116 n/a 116Brown n/a 112 112 112 112 112 112 112Medium metallic grey n/a 612 612 612 612 612 612 612Silver n/a 613 613 613 613 613 613 613Bright White 118 118 118 118 118 118 118 118Beige metallic mist n/a 611 611 611 611 611 611 611Micro Grey * 121 n/a n/a n/a n/a n/a n/a n/aBrushed Sand * 122 n/a n/a n/a n/a n/a n/a n/aBrushed Grey * 123 n/a n/a n/a n/a n/a n/a n/aFog 128 n/a n/a n/a n/a n/a n/a n/aMicro Sand * 129 n/a n/a n/a n/a n/a n/a n/aPlated FinishesSatin brass n/a n/a PZ n/a PZ n/a PZ PZBrushed pewter n/a n/a PT n/a PT n/a PT PTPolished chrome n/a n/a PD n/a PD n/a n/a PDn/a = not available* = matching edge band not available, also not optional for panel tiles or components, worksurfaces only

Knoll Office Tables

72

Reff Original finish options

Non-Wood FinishesPanel Tiles, Panel Top Trims Panel Base Panel Beltway Leg and Interaction

Finishes Tops & Components Window Frames Side Plates Side Plates* Bases Style Legs Handles GrommetsBlack LG LG LG LG LG LG LG LGDark grey n/a DG DG DG DG DG n/a DGMedium grey n/a OI OI OI OI OI n/a OICharcoal grey LD LD LD LD LD LD n/a LDFolkstone grey LA LA LA LA LA LA n/a LAOyster grey LC LC LC LC LC LC n/a LCPumice LB LB LB LB LB LB n/a LBWillow grey LE LE LE LE LE LE n/a LEDark grey (metallic) n/a n/a n/a n/a n/a n/a V n/aMedium grey (metallic) n/a n/a n/a n/a n/a n/a J n/aSilver (metallic) n/a HPF HPF HPF HPF HPF HPF HPFWhite LH LH LH LH LH LH LH LHPlated FinishesSatin brass n/a n/a PZ n/a PZ n/a PZ PZBrushed pewter n/a n/a PT n/a PT n/a PT PTPolished chrome n/a n/a PD n/a PD n/a n/a PDCurrents FinishesWhite n/a B B B B B B BMetallic flint n/a 2 2 2 2 2 2 2Light metallic grey n/a U U U U U U UMedium metallic grey n/a J J J J J J JDark metallic grey n/a V V V V V V VMetallic beige n/a H H H H H H HLight metallic tan n/a W W W W W W WSoft grey n/a E E E E E E EMedium Grey n/a Y2 Y2 Y2 Y2 Y2 Y2 Y2n/a = not applicable*Beltway side plates not available in Satin brass, Brushed pewter or Polished chrome.

Knoll Office Tables

73

Ref

f

Conference room topsSquare and rectangular11/4� thick

description w d pattern no. L M/V1 V2 V3

Rectangular top 1 piece 72� 30� RRA7230-( ) $557. $606. $696. $940.84� 30� RRA8430-( ) 616. 668. 770. 1,039.96� 30� RRA9630-( ) 691. 752. 864. 1,166.72� 36� RRA7236-( ) 605. 658. 756. 1,021.84� 36� RRA8436-( ) 662. 719. 825. 1,115.96� 36� RRA9636-( ) 762. 828. 954. 1,288.84� 42� RRA8442-( ) 978. 1,064. 1,221. 1,648.96� 42� RRA9642-( ) 1,123. 1,219. 1,402. 1,893.96� 48� RRA9648-( ) 1,194. 1,298. 1,492. 2,015.

Rectangular top 2 piece 120� 36� RRA12036-( ) 1,224. 1,329. 1,530. 2,065.120� 42� RRA12042-( ) 1,687. 1,835. 2,110. 2,849.144� 42� RRA14442-( ) 1,896. 2,061. 2,370. 3,200.120� 48� RRA12048-( ) 1,834. 1,995. 2,293. 3,096.144� 48� RRA14448-( ) 2,031. 2,210. 2,541. 3,430.

Rectangular top 3 piece 168� 42� RRA16842-( ) 2,485. 2,702. 3,109. 4,198.192� 42� RRA19242-( ) 2,695. 2,929. 3,367. 4,545.168� 48� RRA16848-( ) 2,701. 2,936. 3,376. 4,557.192� 48� RRA19248-( ) 2,901. 3,152. 3,623. 4,890.

Square tops – 36� RRA3636-( ) 429. 467. 538. 727.– 42� RRA4242-( ) 557. 606. 696. 940.– 48� RRA4848-( ) 732. 794. 914. 1,232.* 60� RRA6060-( ) 1,140. 1,238. 1,427. 1,925.* 72� RRA7272-( ) 1,344. 1,462. 1,680. 2,270.

Order Code

Example: RRA72302

R ReffR RectangularA 11/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry


To order please specify patternnumber including:

1. Top thickness2. Width3. Depth4. Finish type5. Finish

1. Thickness options:A = 11/4�

4. Finish type:L = LaminateM = Wood/laminate mixed1 = V12 = V23 = V3

*Square tops in two pieces.

Application Notes

Product on this page will acceptwoodgrain laminate where laminateis currently an option.List price for woodgrain laminateoptions will be current publishedlaminate list price plus 10%.

All tops on this page are withoutgrommets or drillings. The intendeduse of these products is to provideconference room table options.

Top to top brackets included.

Tops have no radius on edges thatadjoin.

See table base matrix in PlanningGuide, pages 140 and 141.

11/4� tops require support at midpoint to reduce spans to 48� or less.


Mixed finish 13/4� tops are notpost-formed.

Actual widths of worksurfaceare1/16� less than nominaldimension. Actual depth is1/8� lessthan nominal dimension.

Applicable finishes are listed onReff and Reff.

Knoll Office Tables

74

Conference room topsSquare and rectangular13/4� thick


Rectangular top 1 piece 72� 30� RRB7230-( ) $669. $969. $1,113. $1,503.84� 30� RRB8430-( ) 739. 1,052. 1,210. 1,634.96� 30� RRB9630-( ) 827. 1,153. 1,326. 1,789.72� 36� RRB7236-( ) 724. 1,032. 1,188. 1,604.84� 36� RRB8436-( ) 790. 1,111. 1,280. 1,727.96� 36� RRB9636-( ) 915. 1,256. 1,443. 1,948.84� 42� RRB8442-( ) 1,172. 1,554. 1,787. 2,414.96� 42� RRB9642-( ) 1,344. 1,755. 2,017. 2,724.96� 48� RRB9648-( ) 1,432. 1,855. 2,135. 2,882.

Rectangular top 2 piece 120� 36� RRB12036-( ) 1,467. 1,900. 2,183. 2,947.120� 42� RRB12042-( ) 2,027. 2,544. 2,927. 3,950.144� 42� RRB14442-( ) 2,274. 2,834. 3,257. 4,398.120� 48� RRB12048-( ) 2,201. 2,748. 3,160. 4,265.144� 48� RRB14448-( ) 2,439. 3,023. 3,476. 4,693.

Rectangular top 3 piece 168� 42� RRB16842-( ) 2,981. 3,657. 4,204. 5,677.192� 42� RRB19242-( ) 3,232. 3,946. 4,541. 6,131.168� 48� RRB16848-( ) 3,242. 3,957. 4,552. 6,146.192� 48� RRB19248-( ) 3,477. 4,233. 4,868. 6,573.

Square tops – 36� RRB3636-( ) 517. 792. 910. 1,229.– 42� RRB4242-( ) 669. 969. 1,113. 1,503.– 48� RRB4848-( ) 875. 1,211. 1,392. 1,878.* 60� RRB6060-( ) 1,366. 1,778. 2,045. 2,760.* 72� RRB7272-( ) 1,613. 2,066. 2,377. 3,209.

Order Code

Example: RRB72302

R ReffR RectangularB 13/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry


To order please specify patternnumber including:1. Top thickness2. Width3. Depth4. Finish type5. Finish

1. Thickness options:B = 13/4�


*Square tops in two pieces.

Application Notes




See table base matrix in PlanningGuide, pages 140 and 141.



Mixed finish 13/4� tops are notpost-formed.



Knoll Office Tables

75

Ref

f

Conference room topsRound and racetrack11/4� thick


Racetrack top 1 piece 72� 30� RTA7230-( ) $1,054. $1,145. $1,314. $1,775.84� 30� RTA8430-( ) 1,172. 1,274. 1,465. 1,977.96� 30� RTA9630-( ) 1,302. 1,418. 1,631. 2,202.72� 36� RTA7236-( ) 1,202. 1,305. 1,500. 2,025.84� 36� RTA8436-( ) 1,349. 1,468. 1,687. 2,276.96� 36� RTA9636-( ) 1,497. 1,628. 1,873. 2,528.84� 42� RTA8442-( ) 1,641. 1,786. 2,054. 2,773.96� 42� RTA9642-( ) 1,840. 2,000. 2,298. 3,104.96� 48� RTA9648-( ) 2,018. 2,191. 2,520. 3,401.

Racetrack top 2 piece 120� 36� RTA12036-( ) 1,933. 2,103. 2,419. 3,265.120� 42� RTA12042-( ) 2,087. 2,266. 2,608. 3,521.144� 42� RTA14442-( ) 2,301. 2,500. 2,875. 3,880.120� 48� RTA12048-( ) 2,218. 2,411. 2,773. 3,743.144� 48� RTA14448-( ) 2,358. 2,565. 2,947. 3,978.

Racetrack top 3 piece 168� 42� RTA16842-( ) 2,885. 3,134. 3,606. 4,868.192� 42� RTA19242-( ) 3,098. 3,368. 3,875. 5,231.168� 48� RTA16848-( ) 3,087. 3,353. 3,855. 5,206.192� 48� RTA19248-( ) 3,226. 3,508. 4,032. 5,443.

Round tops – 36� RTA3636-( ) 592. 644. 739. 998.– 42� RTA4242-( ) 688. 745. 857. 1,156.– 48� RTA4848-( ) 1,132. 1,229. 1,413. 1,907.* 60� RTA6060-( ) 1,773. 1,927. 2,216. 2,991.* 72� RTA7272-( ) 2,192. 2,383. 2,744. 3,704.

Order Code

Example: RTA72302

R ReffT Rounded topA 11/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry



1. Top thickness2. Width3. Depth4. Finish type5. Finish

1. Thickness options:A = 11/4�


*Round tops in two pieces.

Application Notes



See table base matrix in PlanningGuide pages 140 and 141.




Laminate and mixed finish 13/4� topson this page are not post formed.




Knoll Office Tables

76

Conference room topsRound and racetrack13/4� thick


Racetrack top 1 piece 72� 30� RTB7230-( ) $1,261. $1,661. $1,908. $2,577.84� 30� RTB8430-( ) 1,407. 1,825. 2,099. 2,834.96� 30� RTB9630-( ) 1,564. 2,010. 2,310. 3,118.72� 36� RTB7236-( ) 1,443. 1,866. 2,145. 2,896.84� 36� RTB8436-( ) 1,621. 2,073. 2,382. 3,217.96� 36� RTB9636-( ) 1,799. 2,283. 2,622. 3,538.84� 42� RTB8442-( ) 1,971. 2,482. 2,853. 3,852.96� 42� RTB9642-( ) 2,208. 2,756. 3,171. 4,281.96� 48� RTB9648-( ) 2,422. 2,984. 3,433. 4,636.

Racetrack top 2 piece 120� 36� RTB12036-( ) 2,322. 2,889. 3,320. 4,482.120� 42� RTB12042-( ) 2,503. 3,102. 3,568. 4,817.144� 42� RTB14442-( ) 2,759. 3,397. 3,909. 5,277.120� 48� RTB12048-( ) 2,660. 3,283. 3,775. 5,095.144� 48� RTB14448-( ) 2,830. 3,479. 4,001. 5,402.

Racetrack top 3 piece 168� 42� RTB16842-( ) 3,461. 4,213. 4,845. 6,539.192� 42� RTB19242-( ) 3,721. 4,512. 5,189. 7,006.168� 48� RTB16848-( ) 3,702. 4,495. 5,166. 6,975.192� 48� RTB19248-( ) 3,871. 4,689. 5,391. 7,279.

Round tops – 36� RTB3636-( ) 711. 1,018. 1,172. 1,582.– 42� RTB4242-( ) 823. 1,149. 1,321. 1,781.– 48� RTB4848-( ) 1,359. 1,768. 2,032. 2,745.* 60� RTB6060-( ) 2,127. 2,663. 3,064. 4,137.* 72� RTB7272-( ) 2,633. 3,248. 3,736. 5,043.

Order Code

Example: RTB72302

R ReffT Rounded topB 13/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry


To order please specify patternnumber including:1. Top thickness2. Width3. Depth4. Finish type5. Finish

1. Thickness options:B = 13/4�



Application Notes



See table base matrix in PlanningGuide pages 140 and 141.




Laminate and mixed finish 13/4� topson this page are not post formed.




Knoll Office Tables

77

Ref

f

Waterfall edge11/4� thick conference room topsround and racetrackwith 2� waterfall edge

description w d pattern no. V1 V2 V3

Racetrack top - one piece 72� 30� RTAW7230-(1/2/3) $3,758. $4,320. $5,833.84� 30� RTAW8430-(1/2/3) 4,182. 4,810. 6,494.96� 30� RTAW9630-(1/2/3) 4,656. 5,353. 7,228.72� 36� RTAW7236-(1/2/3) 4,283. 4,923. 6,646.84� 36� RTAW8436-(1/2/3) 4,815. 5,537. 7,473.96� 36� RTAW9636-(1/2/3) 5,342. 6,147. 8,298.84� 42� RTAW8442-(1/2/3) 5,862. 6,743. 9,104.96� 42� RTAW9642-(1/2/3) 6,563. 7,546. 10,186.

Racetrack top - two piece, Waterfall edge on allsides except on parting lines

120� 36� RTAW12036-(1/2/3) 6,901. 7,934. 10,712.120� 42� RTAW12042-(1/2/3) 7,441. 8,556. 11,552.144� 42� RTAW14442-(1/2/3) 8,205. 9,436. 12,739.

Racetrack top - three piece, Waterfall edge on allsides except on parting lines

168� 42� RTAW16842-(1/2/3) 10,289. 11,834. 15,976.192� 42� RTAW19242-(1/2/3) 11,054. 12,714. 17,165.

RTAW16842-(1/2) comes with 2-60� pieces/1-48� centerRTAW19242-(1/2) comes with 2-72� pieces/1-48� center

Round tops, Waterfall edge on all sides except onparting lines

– 36� RTAW3636-(1/2/3) 2,115. 2,835. 3,827.– 42� RTAW4242-(1/2/3) 2,448. 3,285. 4,436.* 60� RTAW6060-(1/2/3) 6,324. 7,269. 9,814.* 72� RTAW7272-(1/2/3) 7,827. 9,000. 12,150.

Order Code

Example: RTAW72302

R ReffT Rounded topA 11/4� thickW Waterfall all sides72 72� wide30 30� deep2 V2 finishV319 Medium cherry



1. Top thickness2. Finish type3. Finish

1. Thickness option:A = 11/4�

2. Finish type:1 = V12 = V23 = V3


Application Notes


See table base matrix in PlanningGuide for base supportsrecommended.




Waterfall tops cannot be specifiedwith semi-open pore finish.



Products on this page do not acceptthe following finishes:Y341 WengeY342 Medium TeakY343 Dark Grey Oak

Knoll Office Tables

78

Waterfall edge11/4� thick conference room topssquare and rectangularwith 2� waterfall edge

description w d pattern no. V1 V2 V3

Rectangular top - one piece 72� 30� RRAW7230-(1/2/3) $1,984. $2,284. $3,084.84� 30� RRAW8430-(1/2/3) 2,195. 2,526. 3,410.96� 30� RRAW9630-(1/2/3) 2,463. 2,833. 3,824.72� 36� RRAW7236-(1/2/3) 2,156. 2,480. 3,347.84� 36� RRAW8436-(1/2/3) 2,359. 2,709. 3,658.96� 36� RRAW9636-(1/2/3) 2,724. 3,130. 4,226.84� 42� RRAW8442-(1/2/3) 3,487. 4,008. 5,412.96� 42� RRAW9642-(1/2/3) 3,998. 4,598. 6,207.

Rectangular top - two piece, Waterfall edge on allsides except on parting lines

120� 36� RRAW12036-(1/2/3) 4,362. 5,021. 6,778.120� 42� RRAW12042-(1/2/3) 6,021. 6,925. 9,349.144� 42� RRAW14442-(1/2/3) 6,764. 7,779. 10,501.

Rectangular top - three piece, Waterfall edge onall sides except on parting lines

168� 42� RRAW16842-(1/2/3) 8,869. 10,202. 13,774.192� 42� RRAW19242-(1/2/3) 9,610. 11,050. 14,918.

RRAW16842-(1/2) comes with 2-60� pieces/1-48� centerRRAW19242-(1/2) comes with 2-72� pieces /1-48� center

Square top - one piece – 36� RRAW3636-(1/2/3) 1,535. 2,056. 2,777.– 42� RRAW4242-(1/2/3) 1,984. 2,662. 3,594.

Square top - two piece, Waterfall edge not onparting lines

– 60� RRAW6060-(1/2/3) 4,064. 4,672. 6,307.– 72� RRAW7272-(1/2/3) 4,799. 5,520. 7,451.

Order Code

Example: RRAW72302

R ReffR RectangularA 11/4� thickW Waterfall all sides72 72� wide30 30� deep2 V2 finishV319 Medium cherry



1. Top thickness2. Finish type3. Finish

1. Thickness option:A = 11/4�

2. Finish type:1 = V12 = V23 = V3



Application Notes




See table base matrix in PlanningGuide for base supportsrecommended.


Waterfall tops cannot be specifiedwith semi-open pore finish.


Knoll Office Tables

79

Ref

f

Optional edge conference room tops11/4� thick conference room topround and racetrack

description w d pattern no. M/V1 V2 V3

Racetrack top - 1 piece 72� 30� RTA(A/B/C/D/E/F/G)7230-(1/2/3) $1,315. $1,512. $2,041.84� 30� RTA(A/B/C/D/E/F/G)8430-(1/2/3) 1,464. 1,686. 2,275.96� 30� RTA(A/B/C/D/E/F/G)9630-(1/2/3) 1,631. 1,876. 2,532.72� 36� RTA(A/B/C/D/E/F/G)7236-(1/2/3) 1,501. 1,723. 2,326.84� 36� RTA(A/B/C/D/E/F/G)8436-(1/2/3) 1,689. 1,937. 2,617.96� 36� RTA(A/B/C/D/E/F/G)9636-(1/2/3) 1,874. 2,153. 2,906.84� 42� RTA(A/B/C/D/E/F/G)8442-(1/2/3) 2,054. 2,362. 3,188.96� 42� RTA(A/B/C/D/E/F/G)9642-(1/2/3) 2,298. 2,643. 3,568.

Racetrack top - 2 piece Profile edge on all sidesexcept on parting lines

120� 36� RTA(A/B/C/D/E/F/G)12036-(1/2/3) 2,419. 2,781. 3,754.120� 42� RTA(A/B/C/D/E/F/G)12042-(1/2/3) 2,608. 2,998. 4,048.144� 42� RTA(A/B/C/D/E/F/G)14442-(1/2/3) 2,874. 3,307. 4,463.120� 48� RTA(A/B/C/D/E/F/G)12048-(1/2/3) 2,773. 3,187. 4,302.144� 48� RTA(A/B/C/D/E/F/G)14448-(1/2/3) 2,948. 3,388. 4,575.

Racetrack top - 3 piece Profile edge on all sidesexcept on parting lines

168� 42� RTA(A/B/C/D/E/F/G)16842-(1/2/3) 3,605. 4,146. 5,597.192� 42� RTA(A/B/C/D/E/F/G)19242-(1/2/3) 3,875. 4,455. 6,014.168� 48� RTA(A/B/C/D/E/F/G)16848-(1/2/3) 3,855. 4,434. 5,985.192� 48� RTA(A/B/C/D/E/F/G)19248-(1/2/3) 4,032. 4,637. 6,258.

Round tops Profile edge on all sides except onparting lines.

– 36� RTA(A/B/C/D/E/F/G)3636-(1/2/3) 740. 851. 1,149.– 42� RTA(A/B/C/D/E/F/G)4242-(1/2/3) 858. 986. 1,332.– 48� RTA(A/B/C/D/E/F/G)4848-(1/2/3) 1,413. 1,624. 2,192.* 60� RTA(A/B/C/D/E/F/G)6060-(1/2/3) 2,216. 2,548. 3,439.* 72� RTA(A/B/C/D/E/F/G)7272-(1/2/3) 2,742. 3,154. 4,258.

Order Code

Example: RTAG72302

R ReffT Racetrack topA 11/4� thickG Gamma72 22� wide30 30� deep2 V2 finishV319 Medium cherry



1. Edge profile2. Width3. Depth4. Finish type5. Finish

1. Edge profile options:A = AlphaB = BetaC = ChiD = DeltaE = EpsilonF = PhiG = Gamma

4. Finish type:M = Mixed (laminate surface / woodedge)1 = V12 = V23 = V3




Application Notes

Knoll assumes no responsibilityfor special grommet locationswhich interfere with support orother hardware. All requests forspecial grommet locations mustbe approved through customproduct development.

Products on this page are shippedwithout hardware which must beordered separately from the supportcomponents section.


Knoll Office Tables

80

Optional edge conference room tops11/4� thick conference room topsquare and rectangular

description w d pattern no. M/V1 V2 V3

Rectangular top - 1 piece 72� 30� RRA(A/B/C/D/E/F/G)7230-(1/2/3) $696. $799. $1,080.84� 30� RRA(A/B/C/D/E/F/G)8430-(1/2/3) 769. 887. 1,198.96� 30� RRA(A/B/C/D/E/F/G)9630-(1/2/3) 864. 992. 1,340.72� 36� RRA(A/B/C/D/E/F/G)7236-(1/2/3) 756. 868. 1,172.84� 36� RRA(A/B/C/D/E/F/G)8436-(1/2/3) 825. 948. 1,281.96� 36� RRA(A/B/C/D/E/F/G)9636-(1/2/3) 954. 1,097. 1,483.84� 42� RRA(A/B/C/D/E/F/G)8442-(1/2/3) 1,222. 1,404. 1,895.96� 42� RRA(A/B/C/D/E/F/G)9642-(1/2/3) 1,402. 1,611. 2,175.

Rectangular top - 2 piece Profile edge on allsides except on parting lines

120� 36� RRA(A/B/C/D/E/F/G)12036-(1/2/3) 1,530. 1,759. 2,375.120� 42� RRA(A/B/C/D/E/F/G)12042-(1/2/3) 2,110. 2,426. 3,273.144� 42� RRA(A/B/C/D/E/F/G)14442-(1/2/3) 2,369. 2,728. 3,683.120� 48� RRA(A/B/C/D/E/F/G)12048-(1/2/3) 2,293. 2,637. 3,561.144� 48� RRA(A/B/C/D/E/F/G)14448-(1/2/3) 2,541. 2,920. 3,943.

Rectangular top - 3 piece Profile edge on allsides except on parting lines

168� 42� RRA(A/B/C/D/E/F/G)16842-(1/2/3) 3,108. 3,575. 4,825.192� 42� RRA(A/B/C/D/E/F/G)19242-(1/2/3) 3,367. 3,874. 5,229.168� 48� RRA(A/B/C/D/E/F/G)16848-(1/2/3) 3,375. 3,885. 5,245.192� 48� RRA(A/B/C/D/E/F/G)19248-(1/2/3) 3,625. 4,169. 5,626.

Square top Profile edge on all sides except onparting lines

– 36� RRA(A/B/C/D/E/F/G)3636-(1/2/3) 537. 617. 833.– 42� RRA(A/B/C/D/E/F/G)4242-(1/2/3) 696. 799. 1,080.– 48� RRA(A/B/C/D/E/F/G)4848-(1/2/3) 915. 1,050. 1,417.* 60� RRA(A/B/C/D/E/F/G)6060-(1/2/3) 1,425. 1,639. 2,214.* 72� RRA(A/B/C/D/E/F/G)7272-(1/2/3) 1,680. 1,933. 2,609.

Order Code

Example: RSAG72302

R ReffR Conference Room topA 11/4� thickG Gamma72 72� wide30 30� deep2 V2 finishV319 Medium cherry



1. Edge option2. Width3. Depth4. Finish type5. Finish

1. Edge profile options:A = AlphaB = BetaC = ChiD = DeltaE = EpsilonF = PhiG = Gamma

4. Finish type:M = Mixed ( laminate surface / woodedge)1 = V12 = V23 = V3

* Square tops in two pieces.



Application Notes

Knoll assumes no responsibilityfor special grommet locationswhich interfere with support orother hardware. All requests forspecial grommet locations mustbe approved through customproduct development.

Products on this page are shippedwithout hardware which must beordered separately from the supportcomponents section.


Knoll Office Tables

81

Ref

f

Bases, 261/2� highpainted or plated

description dia w h d pattern no.

P1paint/metal P2 P3

Column leg, Interaction style (rectangular plate) 4� – 261/2� – RSC $233. $246. $258.

4� diameter base, plain cylinder 4� – 261/2� – RCB 245. 257. 269.

Set of four column legs (4� dia.), Interaction style(triangular plate)

4� – 261/2� – RSC4-( ) 910. 954. 1,004.

Drum base 14� 261/2� – RSD1427-( ) 1,065. 1,119. 1,174.18� 261/2� – RSD1827-( ) 1,157. 1,216. 1,275.20� 261/2� – RSD2027-( ) 1,194. 1,253. 1,315.24� 261/2� – RSD2427-( ) 1,429. 1,502. 1,576.30� 261/2� – RSD3027-( ) 1,598. 1,677. 1,760.

T-leg, Interaction style – 261/2� 24� RIB24T 334. 350. 369.

T-Leg, plain tube style – 261/2� 20� RCB20T-( ) 361. 379. 397.- 261/2� 24� RCB24T-( ) 367. 388. 406.- 261/2� 30� RCB30T-( ) 406. 425. 448.- 261/2� 40� RCB40T-( ) 427. 450. 473.

Order Code

Example: RSC

R ReffS SupportC Cylinder



1. Finish type, where applicable2. Finish

Finish type options:P = PaintM = Metal (plated)

Application Notes

Cylinder bases, T-legs, X-bases areKnoll Interaction style. Trim ringwill be black.

Interaction style cylinder base,column legs, T-leg, and X-base arenot available in plated finishes.

Refer to Planning Guide fortop-base matrix, pages 140 and 141.

All bases include 11/2� leveller.

Only the plain cylinder and tubelegs can be ordered in platedfinishes.


Knoll Office Tables

82


description dia w h d pattern no.

P1paint/metal P2 P3

X-base – 261/2� 28� RIB28X-( ) $551. $580. $609.– 261/2� 32� RIB32X-( ) 747. 786. 825.

Metal paint finishes only

Spider base, plain tube style – 261/2� 24� RCB24X 564. 593. 622.– 261/2� 28� RCB28X 591. 620. 651.– 261/2� 36� RCB36X 640. 674. 706.

Order Code

Example: RSC

R ReffS SupportC Cylinder



1. Finish type, where applicable2. Finish

Finish type options:P = PaintM = Metal (plated)

Application Notes

Cylinder bases, T-legs, X-bases areKnoll Interaction style. Trim ringwill be black.

Interaction style cylinder base,column legs, T-leg, and X-base arenot available in plated finishes.



Only the plain cylinder and tubelegs can be ordered in platedfinishes.


Knoll Office Tables

83

Ref

f

Bases, 261/2� highlaminate, V1, V2 or V3

description dia. w h d pattern no. L V1 V2 V3

Drum base 14� 261/2� – RSD1427-( ) n/a $1,245. $1,433. $1,935.18� 261/2� – RSD1827-( ) n/a 1,352. 1,556. 2,102.20� 261/2� – RSD2027-( ) n/a 1,396. 1,606. 2,167.24� 261/2� – RSD2427-( ) n/a 1,674. 1,925. 2,599.30� 261/2� – RSD3027-( ) n/a 1,870. 2,148. 2,899.

T-base (hardware included)* 20� 261/2� 12� RST1-( ) 398. 451. 527. 713.24� 261/2� 12� RST2-( ) 426. 486. 558. 753.30� 261/2� 12� RST3-( ) 501. 562. 652. 880.36� 261/2� 12� RST4-( ) 569. 646. 741. 1,001.42� 261/2� 12� RST5-( ) 631. 719. 828. 1,120.48� 261/2� 12� RST6-( ) 704. 793. 916. 1,236.

L-base (hardware included), non-handed* 12� 261/2� 12� RSL12-( ) 398. 451. 527. 713.15� 261/2� 12� RSL15-( ) 407. 462. 532. 718.20� 261/2� 12� RSL20-( ) 426. 477. 551. 744.24� 261/2� 12� RSL24-( ) 433. 486. 558. 753.30� 261/2� 12� RSL30-( ) 501. 562. 652. 880.36� 261/2� 12� RSL36-( ) 569. 646. 741. 1,001.42� 261/2� 12� RSL42-( ) 631. 719. 828. 1,120.48� 261/2� 12� RSL48-( ) 704. 793. 916. 1,236.

Order Code

Example: RSD

R ReffS SupportD Drum base


To order please specify patternnumber including:1. Finish type2. Finish

Finish type options:L = Laminate1 = V12 = V23 = V3

Application Notes




T and L bases are not recommendedfor supporting conference tops.


Knoll Office Tables

84


description dia w h d pattern no.P1 paint/

metal P2 P3

Column Leg, Interaction style w/ rectanglar plate(desk height)

4� dia – 283/8� RSDHC ( )( ) $246. $258. $270.

4� Plain Cylinder (desk height) 4� dia – 283/8� RCDHB ( )( ) 257. 269. 283.

Set of 4 Column legs, Interaction stylew/triangular plate (desk height)

4� dia – 283/8� RSDHC4( )( ) 956. 1,003. 1,054.

T-Leg, plain tube style (desk height) – 283/8� 20� RCDHB20T ( )( ) 379. 398. 417.– 283/8� 24� RCDHB24T ( )( ) 387. 406. 426.– 283/8� 30� RCDHB30T ( )( ) 426. 448. 470.– 283/8� 40� RCDHB40T ( )( ) 450. 473. 496.

T-Leg, Interaction style (desk height) – 283/8� 24� RIBDH24T ( )( ) 350. 369. 388.

X-base (desk height) – 283/8� 28� RIBDH28X ( )( ) 580. 608. 639.– 283/8� 32� RIBDH32X ( )( ) 786. 824. 865.

Order Code

Example: RSDHCP111

R ReffS SupportDH Desk HeightC Column LegP Finish type, paint111 Finish, Jet Black


To order please specify patternnumber including:1. Finish Type, where applicable

P = PaintM = Metal (plated)

2. Finishsee matrix on Reff


Application Notes

Cylinder/column leg bases, T-Legs,X-bases are Knoll Interaction style.Trim ring will be black.

Interaction style cylinder base,column legs, T-leg and X-base arenot available in plated finishes.Only the plain cylinder and the tubelegs can be ordered in platedfinishes.


Refer to Top to Base matrix, pages140 and 141 in the Reff planningguide.

Products on this page are 28-3/8�high. 283/8�h ‘‘desk height’’products should not be mixed with261/2�h components. 283/8�hcomponents when used with 11/4�worksurfaces achieve overall deskheight of 295/8�h. 28-3/8� ‘‘deskheight’’ products may be specifiedfor freestanding or panel basedapplications.

Knoll Office Tables

85

Ref

f


description dia w h d pattern no.P1 paint/

metal P2 P3

Spider base, plain tube style (desk height) – 283/8� 24� RCBDH24X ( )( ) $593. $622. $653.– 283/8� 28� RCBDH28X ( )( ) 620. 651. 684.– 283/8� 36� RCBDH36X ( )( ) 674. 707. 741.

Drum Base (desk height) 14� – 283/8� – RSDHD1428 ( )( ) 1,119. 1,174. 1,234.18� – 283/8� – RSDHD1828 ( )( ) 1,216. 1,275. 1,339.20� – 283/8� – RSDHD2028 ( )( ) 1,253. 1,315. 1,380.24� – 283/8� – RSDHD2428 ( )( ) 1,502. 1,576. 1,655.30� – 283/8� – RSDHD3028 ( )( ) 1,677. 1,761. 1,848.

Order Code

Example: RSDHCP111

R ReffS SupportDH Desk HeightC Column LegP Finish type, paint111 Finish, Jet Black



P = PaintM = Metal (plated)



Application Notes

Cylinder/column leg bases, T-Legs,X-bases are Knoll Interaction style.Trim ring will be black.

Interaction style cylinder base,column legs, T-leg and X-base arenot available in plated finishes.Only the plain cylinder and the tubelegs can be ordered in platedfinishes.




Knoll Office Tables

86

Bases, 283/8� highlaminate, V1, V2 or V3

description dia. w h d pattern no. L V1 V2 V3

Drum Base (desk height) 14� – 283/8� – RSDHD1428 ( )( ) N/A $1,308. $1,504. $2,030.18� – 283/8� – RSDHD1828 ( )( ) N/A 1,421. 1,633. 2,206.20� – 283/8� – RSDHD2028 ( )( ) N/A 1,465. 1,684. 2,275.24� – 283/8� – RSDHD2428 ( )( ) N/A 1,756. 2,022. 2,730.30� – 283/8� – RSDHD3028 ( )( ) N/A 1,964. 2,255. 3,045.

T-base, desk height (hardware included) 20� 283/8� 12� RSDHT1 ( )( ) 418. 475. 552. 747.24� 283/8� 12� RSDHT2 ( )( ) 449. 510. 586. 791.30� 283/8� 12� RSDHT3 ( )( ) 526. 593. 684. 924.36� 283/8� 12� RSDHT4 ( )( ) 598. 679. 779. 1,051.42� 283/8� 12� RSDHT5 ( )( ) 663. 754. 870. 1,175.48� 283/8� 12� RSDHT6 ( )( ) 739. 834. 962. 1,299.

L-base, desk height (hardware included,non-handed)

12� 283/8� 12� RSDHL12 ( )( ) 418. 475. 552. 747.15� 283/8� 12� RSDHL15 ( )( ) 427. 482. 558. 753.20� 283/8� 12� RSDHL20 ( )( ) 449. 500. 581. 784.24� 283/8� 12� RSDHL24 ( )( ) 455. 510. 586. 791.30� 283/8� 12� RSDHL30 ( )( ) 526. 593. 684. 924.36� 283/8� 12� RSDHL36 ( )( ) 598. 679. 779. 1,051.42� 283/8� 12� RSDHL42 ( )( ) 663. 754. 870. 1,175.48� 283/8� 12� RSDHL48 ( )( ) 739. 834. 962. 1,299.

Order Code

Example: RSDHD

R ReffS SupportDH Desk HeightD Drum base2 Finish type, V2V316 Finish, Maple



L = Laminate1 = V12 = V23 = V3



Application Notes

T and L bases are not recommendedfor supporting conference tops.





Knoll Office Tables

87

Ref

f

Construction and Shipping Information

DesignMagnusson is designed with theworkplace of the 21st century inmind. It is an aesthetically versatile,up-to-date furniture solution withwire management features that makeit easy to bring power andcommunication utilities to theworksurface.

Edge and Pull DetailS-pull, stainless steel finish only

Leather pull(LEA, brown or LEB, black)

upcharge applicable

Downtown™Sculptured edge

FinishingAll V2 Magnusson units are finishedwith closed-pore natural beechsubstrate veneer. Veneer is cut to a0.5mm thickness. A uniquepolyurethane coating technique,provides superior resistance tosolvents, stains, abrasion and heat.

Drawer and door fronts of allcomponents are flitch matched.

Grain pattern and color vary withnatural veneer. In addition, grain andcolor vary between natural veneerand solid hardwood. Each unit willreflect the uniqueness of the wood.

Tops and PanelsAll tops and panels incorporatenatural wood veneer over a particleboard substrate.

All desk, return, credenza and bridgeworksurface tops are 11/4� thick.

All desk and credenza modestypanels are 3/4� thick.

Modesty panels are recessed 61/2� ondesks, 11/16� on returns, bridges, andcredenzas.

PedestalsAll Box-Box-File and File-Filepedestals are 15� wide. Double Doorpedestals on 66� wide four-positioncredenzas are 35� wide. Double Doorpedestals on 72� wide four-positioncredenzas are 41� wide.

All Magnusson doors are hinged toopen 100° from the closed position.

DrawersDrawer interiors are optional metalor wood; upcharge applicable forwood interior option.

All box drawers operate onthree-quarter extension metalsuspensions. File drawers operate onthree-part, full-extension metalsuspensions. All suspensions operateon steel ball bearings.

The top box drawer of all woodinterior Box-Box-File pedestalsincludes two adjustable dividers. Aremovable hardwood pencil tray isincluded in top box drawer of eachdesk, with wood interior. Metaldrawer interiors do not accommodatedividers. One black plastic penciltray is included in top box drawer ofeach desk with metal interior.

Paper FilingAll pedestal file drawers and lateralfile drawers include steel bars forPendaflex file suspension. Drawerscan be converted from letter to legalfiling.

Note:File drawer interiors are designed forsuspended files. Excessive weightplaced directly on drawer bottomsmay cause damage that is notcovered by warranty.

Desk Pedestal Filing Options:Letter: One row front-to-back orside-to-sideLegal: One row side-to-side

Return and Credenza Filing Options:Letter: One row front-to-back orside-to-sideLegal: One row side-to-side

Lateral File Filing Options:Letter: Two rows front-to-back or onerow side-to-sideLegal: One row front-to-back orside-to-side

Knoll Office Tables

88

Meeting tables

descriptionoverallw dia. h pattern no. V1 V2

36�D Round meeting table with 3 slanted mastlegs, included

36� 281/2� NTMT 36 ( ) $1,210. $1,258.


42� 281/2� NTMT 42 ( ) 1,410. 1,465.


48� 281/2� NTMT 48 ( ) 1,613. 1,678.

Grommet (Qty. = 1) Specify after dimensions inpattern no.)

NG 15.

Order Code

Example: NTMT 36DV311 113

NT MagnussonMT Meeting table36 36� diameterD Downtown edgeV311 Beech finish113 Dark grey finish

(on mast legs)


Specify:1. Pattern number2. Edge option

(D) Downtown3. Finish code4. Leg finish

Leg Finishes:613 Silver Metallic113 Dark grey

Grommets:Black rectangular center grommetoptional for round meeting table, at$15 list upcharge. Two grommetsoptional on racetrack conferencetable at $33 list upcharge. Locatedcentered on radius at each end.Specify ‘‘G’’ after dimensions inpattern no.

Assembly required.

Mast legs:Feature vertical cable managementaccess via recessed routing on eachleg.

Knoll Office Tables

89

Mag

nuss

on

Conference tables

descriptionoverallw d h pattern no. V1 V2

72�W x 36�D Racetrack conference table with 4slanted mast legs, included

72� 36� 281/2� NTCT 7236 ( ) $2,215. $2,305.

84�W x 42�D Racetrack conference table with 4slanted mast legs, included

84� 42� 281/2� NTCT 8442 ( ) 2,419. 2,516.

96�W x 48� Racetrack conference table with 4slanted mast legs, included

96� 48� 281/2� NTCT 9648 ( ) 2,620. 2,724.

Grommet (QTY. = 2) Specify after dimensions inpattern no.

NG 33. 33.

Order Code

Example: NTCT 7236DV311 113

NT MagnussonCT Conference table72 Length36 WidthD Downtown edgeV311 Beech finish113 Dark grey finish (on

mast legs)


Specify:1. Pattern number2. Edge

(D) Downtown3. Finish code4. Leg finish

Leg Finishes:613 Silver Metallic113 Dary grey

Grommets:Black rectangular center grommetoptional for round meeting table, at$15 list upcharge. Two grommetsoptional on racetrack conferencetable at $33 list upcharge. Locatedcentered on radius at each end.Specify ‘‘G’’ after dimensions inpattern no.

Assembly required.

Mast legs:Feature vertical cable managementaccess via recessed routing on eachleg.

Knoll Office Tables

90

Interaction Base Optionsperformance overview

Four Star Base■ Designed for round, teardrop, blunted round, roundedsquare and square top shapes.

■ Available in fixed height, fixed height with lockingcasters, and adjustable versions.

■ Fixed height base is 285/8� high with top.

■ Adjustable base provides 5� of adjustment of top tomatch height of existing worksurfaces.

■ Locking casters can be retrofitted, and add 11/2� toheight.

■ Available separately on page 158.

Fixed Height Adjustable

Column Base■ Overall height is 28� with standard Interaction7/8� top.

■ Designed for Amoeba, Bat, and Large round(60� diameter) tops.

■ Locking casters can be retrofitted, and increase height11/2�. See page 159.

■ Available separately on page 158.

Fixed Base■ 281/2� overall height.

■ Available split-top mechanism adjusts 7� above and53/4� below main surface, and tilts +9°/−15°.

■ Legs include integral vertical wire managers.

■ Crossbeam is designed for cable storage, and includesremovable black PVC cable flap.

■ Locking casters can be retrofitted, and increase tableheight 11/2�. See Accessories, page 159.

Manually Adjustable Base■ 261/2� - 291/2� height range, on 1/2� increments.

■ Available split-top mechanism adjusts 7.5� above and4.5� below main surface, and tilts +/−15°.

■ Legs include integral vertical wire manager.

■ Crossbeam is designed for cable storage, and includesremovable black PVC cable flap.

■ Locking casters can be retrofitted, and increase tableheight range 11/2�. See Accessories, page 159.

Manually Adjustable

Knoll Office Tables

91

Inte

ract

ion

Interaction Base Optionsperformance overview

Crank Adjustable Base■ 231/2� - 35� height adjustment range.

■ Available split-top mechanism adjusts 7.5� above and 4.5� below main surface, andtilts +/−15°.

■ 300 lb. load capacity.

■ Five turns of the handle adjust worksurface one inch.

■ Handle folds beneath worksurface when not in use, and has soft rubber grip.


■ Locking casters can be retrofitted, and increase table height range 11/2�. SeeAccessories, page 159.

Crank Adjustable

Counterforce Base■ Counterforce provides rapid sit-to-stand adjustment, in a 26� - 41� range.


■ 80 - 120 lb. load capacity (depending on top size and configuration)

■ Hand paddle actuates the vertical adjustment mechanism.

■ Safety interlock prevents inadvertent height change.



Counterforce

Top Crank Adjustable Base■ 271/4� - 431/4� height adjustment range.


■ 200 lb. load capacity.

■ Five turns of the handle adjust worksurface one inch.

■ Handle is removable and stores beneath worksurface when not in use.



Top Crank Adjustable

Electric Adjustable Base■ Electric adjustable base provides sit-to-stand adjustment, in a 271/4� - 431/4� range.


■ 200 lb. load capacity

■ Rocker switch actuates the vertical adjustment mechanism.



Electric Adjustable

Knoll Office Tables

92

Interaction Table Planningschematic plan viewsScale =1/4�-1’0

INTERACTION TOP TABLESFour Star Base Round Blunted Round Teardrop

Rounded Square Square

C-Leg Base Hot Dog Small Boomerang Large Boomerang

Corner Counterforce Split Top Counterforce

Knoll Office Tables

93

Inte

ract

ion


Columns Base and T-Leg

Amoeba Bat Large Round Racetrack

40"

C-Leg Tables with Morrison,Equity, Reff, and Dividends Tops

Straight Corner Split-Top

Split-Top Corner

Knoll Office Tables

94


INTERACTION TOP TABLESFour Star Base Fixed Height Adjustable Column Base

"

Adjustability Ranges

Manually Adjustable Counterforce Crank Adjustable Split Top

Top Crank Adjustable Electric Adjustable

Knoll Office Tables

95

Inte

ract

ion


C-Leg and T-Leg Tables for Morrison, Equity, Reff, and Dividends

End View

Fixed Height Manually Adjustable Crank Adjustable Counterforce T-Leg

Inside View

Outside View

Knoll Office Tables

96

Ordering Interaction Tables

This price list provides you with theproduct information you need tospecify and order Interaction Tables.

Interaction Tables are a completecollection of portable and adjustablework and meeting tables. Interactiontables are appropriate for open planworkstations and private offices,conference areas and team spaces,cafeterias and training areas.

Interaction Tables may be plannedalone, or in combination with KnollMorrison, Equity, Reff or DividendsHorizon office systems.

Top options include original 7/8� thickInteraction tops, 11/4� Morrison tops,11/4� Equity and Dividends tops,15/32� Reff tops, and 11/8� Cascadeedge tops. Base options include fixedor adjustable height four star, C-leg,T-leg, columns, Counterforce, andelectric adjustable tables.

How to Order Interaction Tables

Interaction Tables are specified bypattern numbers containing a logical,alphanumeric sequence describingthe top type, size, features, base, andfinish type of the table. Specificfinishes are listed as color fieldsfollowing the pattern number.

To specify a table consult the ordercode examples and application notesat the bottom of each page.

For example, to order an Interaction48� boomerang shape, adjustableheight table, in yellow laminate withblack edge, dark grey base, andyellow trim rings, specify: IT B4848AM; M12, EN, 113, T5

Details follow:I Interaction TableT Interaction topB Boomerang shape48 Width48 DepthA Adjustable baseM Plastic laminate

M12 Yellow topEN Black edge113 Dark grey baseT5 Yellow trim rings

To expedite correct entry of yourorder, be certain all catalog numbers,quantities, colors, and areaidentifications are completelyspecified. Also include completepurchase order numbers, bill-to andship-to addresses, a contact name,and specific shipping dates required.

Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Tel. 215 679-7991Fax 215 679-1788

Once your order is entered at Knoll,an acknowledgment will be mailedwithin five days of the originalacknowledgment. If it is necessary torevise your order, please contact yourCustomer Service representative.

PRODUCT SPECIFICATIONS

Tops

Interaction, 7/8� thickPlastic laminate or veneer surface on3/4� medium density fiberboard; vinylT-mold edge.

Interaction split top and cornerCounterforce table tops have 2�radius at all corners.

Morrison System, 11/4� thickPlastic laminate or veneer surface on11/8� particle board, with balancedconstruction backer. Front and backedges of rectangular laminate topsare post-formed, with a 9/32� radius attop and bottom. Front and backedges of other laminate tops arematching radius T-mold. Side edgesof Morrison laminate tops areself-edge laminate. Front and backedges of veneer tops are solid 3/16�veneer with 3/16� radius top andbottom; side edges are veneer.

Equity, 11/4� thickPlastic laminate on 11/8� particleboard, with laminate backer. Alledges have 2mm PVC edgeband orT-mold extrusion.

Reff System, 15/32� thickPlastic laminate or veneer surface on11/8� particle board with balancedconstruction backer. Edges of plasticlaminate tops are matching solidcolor-core PVC with 2.8 mm radiustop and bottom.

Veneer tops have veneer edge with2.4 mm radii.

Dividends Horizon, 11/4� thickPlastic laminate with laminatebacker. All edges have 2mm PVCedgeband or T-mold extrusion.

Cascade Edge, 11/8� thickPlease Note: Cascade Edgeworksurfaces are wrapped with avinyl sheet that is heated andpressed around an MDF substrate.Vinyl is more susceptible to denting,impact, tearing and marring thanconventional high pressure laminateand should be handled with care. Donot drag worksurfaces across anyflooring surface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces come with a 5 yearwarranty that covers defects inworkmanship and materials. Thiswarranty does not cover damageoccurring during or after installation.

Bases

Four star or column baseDie-cast aluminum base, 33/4�diameter 14-gauge steel tube, withpowder epoxy finish. Trim ring isABS plastic.

Base diameters for 30� or 36� roundare 28�; for 42� or 48� round are 32�;for columns are 5�.

C-Leg or T-Leg baseDie cast aluminum feet, extrudedaluminum vertical legs, and14-gauge steel crossbeam, withpowder epoxy finish. Tops aresupported by 14-gauge, formed steelcantilevers, with color-integralpolystyrene end caps. Each legincludes black, dual-durometer,extruded PVC wire manager, andpolystyrene trim ring. Crossbeamincludes removable black PVC cableflap. (Does not apply to top crankand electric adjustable bases)

Counterforce baseCrossbeam is 11-gauge steelweldment, containing avariable-output spring-actuatedmechanism that will counterbalanceup to 155 lbs. (including top).Hand-paddle actuates the verticallocking mechanism; safety interlockprevents inadvertent height change.Large gear pulley and spiral aremineral-filled acetyl. Springs are5-gauge chrome silicon alloy steelwire.

Glides and CastersGlides are 2� diameter nylon, with3/4� steel stems and optional 1/2� highnylon glide extenders. Lockingcasters are nylon with 1/2� steelstems. Casters can be retrofitted inthe field.

Casters may replace glides on anyInteraction table, and raise top 11/2�.See page 159.

Weight Loads

Interaction Tables exceedANSI/BIFMA standards forworksurface loads: 4.5 lbs per linearinch (functional load) or 10 lbs perlinear inch (proof load) except forCounterforce tables. Counterforcetable bases support a maximum loadof 150 lbs. including the weight ofthe worksurface, (example: weight ofworksurface plus weight of objects ontable must not total more than 150lbs. if placed on a Counterforcebase).

Knoll Office Tables

97

Inte

ract

ion

Interaction Core Finishes

Interaction, Morrison, Equity, Reffand Dividends Horizon TablesTops:

Solid laminate:111 Jet Black114 Folkstone Grey (was LA)117 Soft Grey (was M42)118 Bright White119 Pumice (was LF)121 Micro Grey (comes with 114

Folkstone grey edge only onReff tables)

122 Brushed Sand (comes with 119Pumice edge only on Refftables)

123 Brushed Grey (comes with 128Fog edge only on Reff tables)

128 Fog129 Micro Sand (comes with 119

Pumice edge only on Refftables)

Woodgrain laminate:124 Medium Cherry (not available

on Reff tables)125 Natural Maple (not available

on Reff tables)126 Natural Cherry (not available

on Reff tables)127 Walnut (not available on Reff

tables)

Top Edges:111 Jet Black113 Dark Grey (was Y3)114 Folkstone Grey (was LA)115 Medium Grey (was Y2)117 Soft Grey (was E)118 Bright White119 Pumice (was LF)124 Medium Cherry (not available

on Interaction or Reff tables)125 Natural Maple (not available

on Interaction or Reff tables)126 Natural Cherry (not available

on Interaction or Reff tables)127 Walnut (not available on

Interaction or Reff tables)128 Fog

Note: Edge finish not optional onReff tables; matches surface unlessnoted differently above.

Bases:113 Dark Grey (was Y3)115 Medium Grey (was Y2)117 Soft Grey (was E)

Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow

Core laminate color options areidentical for Type L, Type M andType P laminates. For Legacylaminates, Type L refers to Morrisonlegacy laminates, Type M refers toEquity and Dividends legacylaminates, and Type P refers to Refflegacy laminates.

V1 Techwood Closed PoreY811 Natural (Legacy: VT)Y821 Blonde Maple (Legacy: V4

Maple)Y831 Light Cherry (Legacy: V6

Cherry)Y316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY851 Black Oak

V2 Natural Veneer Closed PoreV312 Bronzed CherryV316 Maple (Legacy: VK)V411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV421 Chalk OakV423 Light OakV425 Amber OakV427 Brown OakV433 Light Fawn CherryV436 Medium Brown CherryV439 Straight Anigre

In October, 2009 all Morrisonveneer finishes were transferredfrom our East Greenville Plant toour Toronto Plant. All veneerfinishes were changed to closedpore finishing and assigned newfinish codes.

This price list contains pricing forCore finishes. Core finishes includesome Morrison veneer finishesformally referred to as Techgrain(cross-referenced above) as well asnumerous new veneer finishes nowavailable on Morrison. For detailedpricing of Legacy finishes, pleaserefer to the latest release of CAPworksheet or contact your customerservices representative.

*Patterned laminates (Micro, Brushed and woodgrain laminates) are available on Morrison rectangular tables only.

Knoll Office Tables

98

Interaction Legacy Finishes

Note: Specify Legacy finishes tomatch existing product only.Legacy finishes are not availablefor new customers.

Interaction Top TablesTops:Type L Plastic LaminatesLN Black

Type M Plastic LaminatesM1 Light greyM12 YellowM15 BlueM33 Red

Interaction tops may also bespecified in any standard Morrison,Equity, Dividends or Reff laminate orveneer listed on this page.

Top Edges:EN BlackEL Light greyEG Medium grey

Note: EG Medium Grey edgematches LG Medium Grey laminate.(Y2) Medium Grey base finishmatches Dividends Medium Greyand Equity Medium Grey (Y2) paint.EG Medium Grey edge does notmatch the (Y2) Medium Grey basefinish.


Morrison Top TablesTops:Type L Plastic LaminatesLL Light greyLG Medium greyLD SandLB Snow

Legacy Veneer Finishes

Veneer Group 1C6F3 Medium Brown

Mahogany (Legacy: V7)C6F4 Medium Red

Mahogany (Legacy: V8)C6F5 American Cherry

Techgrain (Legacy: V9)

Veneer Group 2:C6F6 American Cherry

(Legacy: VX)C6F7 Medium Red Mahogany

(Legacy: VZ)


Equity Top TablesTops:Type M Plastic LaminatesM1 Light greyM5 Dark neutralM80 TaupeM89 Medium grey (Slate)M95 Grey graniteM96 Rose graniteMP70 Light oakMP58 Dark mahoganyM2 Soft whiteMR6 Winter grey matrixES7 White essencePA PearwoodMC Caramel mapleCM Clear mapleSD SandB SnowWM Warm cherry

2mm Top Edges:Y2 Medium grey (Slate)D Dark neutralR TaupeY3 Dark greySD SandB SnowCM Clear MapleMC Caramel MapleWM Warm CherryMT Metal


Reff Top TablesTops:Type P Plastic LaminatesPLC Oyster greyPLD Charcoal greyPLE Willow grey


Dividends Top Tables

Top Laminates:MR6 Winter grey matrixCM Clear maplePA PearwoodMC Caramel mapleWM Warm cherrySD SandM1 Light grey

Top Edges:Y1 PewterY2 Medium greyY3 Dark greySD SandB SnowCM Clear MapleMC Caramel MapleWM Warm CherryMT Metal


Note: Add 10% to the list price of any laminate product when specifying a legacy laminate

Knoll Office Tables

99

Inte

ract

ion

Four-star base, fixed and adjustable heightInteraction topsround, blunted round and teardrop

description type w d h pattern no.laminate

M/L/P V1 V2

Round table Fixed height 30� 285/8� IT R3000 X( ) $677. $1,088. $1,266.36� 285/8� IT R3600 X( )( ) 761. 1,222. 1,424.42� 285/8� IT R4200 X( )( ) 916. 1,489. 1,733.48� 285/8� IT R4800 X( ) 1,057. 1,754. 2,044.

Fixed height with casters 30� 285/8� IT R3000 W( ) 711. 1,124. 1,300.36� 285/8� IT R3600 W( ) 768. 1,258. 1,458.42� 285/8� IT R4200 W( ) 952. 1,524. 1,767.

Adjustable 30� 25� - 30� IT R3000 Y( ) 959. 1,371. 1,549.36� 25� - 30� IT R3600 Y( ) 1,044. 1,504. 1,704.42� 25� - 30� IT R4200 Y( ) 1,198. 1,772. 2,013.48� 25� - 30� IT R4800 Y( ) 1,341. 2,036. 2,326.

Blunted round table Fixed height 36� 24� 285/8� IT D3624 X( ) 833. 1,355. 1,574.42� 30� 285/8� IT D4230 X( ) 997. 1,622. 1,888.

Fixed height with casters 36� 24� 285/8� IT D3624 W( ) 869. 1,390. 1,608.42� 30� 285/8� IT D4230 W( ) 1,033. 1,659. 1,922.

Adjustable 36� 24� 25� - 30� IT D3624 Y( ) 1,150. 1,638. 1,856.42� 30� 25� - 30� IT D4230 Y( ) 1,316. 1,905. 2,168.

Order Code

Example: IT T3618 XL; 117, 117,117, T2

I Interaction TableT Interaction topT Teardrop36 Diameter18 Depth of returnX Base typeL Top type117 Top finish117 Top edge finish117 Base finishT2 Trim ring


Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type

Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers

Specify color fields:Top finishBase finishTop edge finishTrim ring finish

Note: All veneer Interaction topscome standard with black edge.

Application Notes

Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem. Tops are7/8� thick, withT-mold edge.

Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� using a hexwrench.

Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 159).

Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.

Knoll Office Tables

100

Four-star base, fixed and adjustable heightInteraction topsround, blunted round and teardrop


M/L/P V1 V2

Teardrop table Fixed height 36� 18� 285/8� IT T3618 X( ) $833. $1,355. $1,574.42� 21� 285/8� IT T4221 X( ) 997. 1,622. 1,888.

Fixed height with casters 36� 18� 285/8� IT T3618 W( ) 869. 1,390. 1,608.42� 21� 285/8� IT T4221 W( ) 1,033. 1,659. 1,922.

Adjustable 36� 18� 25� - 30� IT T3618 Y( ) 1,116. 1,638. 1,856.42� 21� 25� - 30� IT T4221 Y( ) 1,278. 1,905. 2,168.

Order Code

Example: IT T3618 XL; 117, 117,117, T2

I Interaction TableT Interaction topT Teardrop36 Diameter18 Depth of returnX Base typeL Top type117 Top finish117 Top edge finish117 Base finishT2 Trim ring




Specify color fields:Top finishBase finishTop edge finishTrim ring finish

Note: All veneer Interaction topscome standard with black edge.

Application Notes

Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem. Tops are7/8� thick, withT-mold edge.




Knoll Office Tables

101

Inte

ract

ion

Four-star base, fixed and adjustable heightInteraction topssquare and rounded square


M/L/P V1 V2

Square table Fixed height 30� 30� 285/8� IT E3030 X( ) $761. $1,224. $1,424.36� 36� 285/8� IT E3636 X( ) 833. 1,355. 1,574.42� 42� 285/8� IT E4242 X( ) 997. 1,622. 1,888.

Fixed height with casters 30� 30� 285/8� IT E3030 W( ) 796. 1,259. 1,458.36� 36� 285/8� IT E3636 W( ) 869. 1,390. 1,608.42� 42� 285/8� IT E4242 W( ) 1,033. 1,659. 1,922.

Rounded square table Adjustable 30� 30� 25� - 30� IT S3030 Y( ) 1,044. 1,508. 1,704.36� 36� 25� - 30� IT S3636 Y( ) 1,116. 1,638. 1,856.42� 42� 25� - 30� IT S4242 Y( ) 1,278. 1,905. 2,168.

Fixed height 30� 30� 285/8� IT S3030 X( ) 761. 1,224. 1,424.36� 36� 285/8� IT S3636 X( ) 833. 1,355. 1,574.42� 42� 285/8� IT S4242 X( ) 997. 1,622. 1,888.

Fixed height with casters 30� 30� 285/8� IT S3030 W( ) 796. 1,259. 1,458.36� 36� 285/8� IT S3636 W( ) 869. 1,390. 1,608.42� 42� 285/8� IT S4242 W( ) 1,033. 1,659. 1,922.

Order Code

Example: IT S3636XL;118,118,117,T1

I Interaction TableT Interaction topS Rounded square36 Width36 DepthX Base typeL Top type118 Top finish118 Top edge finish117 Base finishT1 Trim ring




Specify color fields:Top finishTop edge finishBase finishTrim ring finish

Note: All veneer Interaction topscome standard with a black edge.

Application Notes

Four-star base tables may be usedinteractively in panel-based orfreestanding planning with anyKnoll system. Tops are7/8� thick,with T-mold edge.

Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� with a hexwrench.



Knoll Office Tables

102

C-leg tables, fixed and adjustable height, linking topsInteraction tops


M/L/P V1 V2

Hot dog shape C-leg base table Fixed height 54� 24� 28� IT H5424 B ( ) $1,057. $1,535. $1,843.

Crank adjustable 54� 24� 227/8�- 341/2� IT H5424 D ( ) 2,288. 2,766. 3,074.

Manually adjustable 54� 24� 251/2�- 29� IT H5424 A ( ) 1,341. 1,818. 2,127.54� 24� 26�- 41� IT H5424 C ( ) 3,171. 3,650. 3,957.

Boomerang shape C-leg base table Fixed height 48� 48� 28� IT B4848 B ( ) 1,143. 1,631. 1,986.60� 60� 28� IT B6060 B ( ) 1,285. 1,830. 2,230.

Manually adjustable 48� 48� 251/2�- 29� IT B4848 A ( ) 1,426. 1,910. 2,269.60� 60� 251/2�- 29� IT B6060 A ( ) 1,564. 2,111. 2,513.

Crank adjustable 48� 48� 227/8�- 341/2� IT B4848 D ( ) 2,373. 2,860. 3,217.60� 60� 227/8�- 341/2� IT B6060 D ( ) 2,514. 3,061. 3,461.

Counterforce 48� 48� 26�- 41� IT B4848 C ( ) 3,256. 3,742. 4,101.60� 60� 26�- 41� IT B6060 C ( ) 3,398. 3,945. 4,346.

Order Code

Example: IT B4848 AL;119, 119,117, T1

I Interaction TableT Interaction topB Top shape48 Width48 DepthA Base typeL Top type119 Top finish119 Top edge finish117 Base finishT1 Trim ring





Base types:A AdjustableB Fixed heightC CounterforceD Crank


Application Notes

C-leg tables may be usedinteractively in panel-based orfreestanding planning with anyKnoll system.

Manually adjustable height basemay be manually adjusted to allowtop height at any1/2� increment from251/2� to 29�. Fixed height tables are28�H.

The patented crank adjustmentmechanism easily lifts up to 300lbs of equipment. Five turns of thelow-profile folding handle raise orlower the top one inch, through a227/8� to 341/2� height range. Thehandle grip is soft textured rubberover steel. Handle may be specifiedright only on hot dog and boomerangtable.

Counterforce tables may be adjustedby user from 26� - 41�H, withouttools. Base may be adjusted tocounterbalance 0-90 lb. load.

All bases provide integral, lay-inwire management in legs andhorizontal beam. Glides permit 1/2�leveling.

Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. Stacking glideextenders raise top height in1/2�increments. (See Accessories, p.159).

Knoll Office Tables

103

Inte

ract

ion

C-leg tables, Counterforce™ corners and split-topsInteraction tops


M/L/P V1 V2

Curvilinear corner shape Counterforce 35� 23� 26� - 41� IT C3624C( ) $3,101. $3,552. $3,892.41� 23� 26� - 41� IT C4224C( ) 3,171. 3,638. 3,976.47� 23� 26� - 41� IT C4824C( ) 3,256. 3,742. 4,101.47� 29� 26� - 41� IT C4830C( ) 3,313. 3,805. 4,172.

Curvilinear corner split-top Counterforce 35� 23� 26� - 41� IT C36SSC( ) 4,229. 4,694. 5,033.41� 23� 26� - 41� IT C42SSC( ) 4,299. 4,767. 5,102.47� 23� 26� - 41� IT C48SSC( ) 4,385. 4,871. 5,227.47� 29� 26� - 41� IT C48DSC( ) 4,440. 4,934. 5,300.

Straight split-top for Morrison or Reff Counterforce 29� 29� 26� - 41� IT S30DSC( ) 3,876. 4,335. 4,668.35� 29� 26� - 41� IT S36DSC( ) 3,947. 4,414. 4,750.41� 29� 26� - 41� IT S42DSC( ) 4,018. 4,504. 4,858.47� 29� 26� - 41� IT S48DSC( ) 4,087. 4,581. 4,948.

Order Code

Example: IT C42SSCM; 117, 117,117, T1

I Interaction TableT Interaction topC Corner shape42 SizeS DepthS Split-topC Counterforce baseM Top type117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish






Application Notes

C-leg Counterforce tables may beplanned with any Knoll system toprovide high performanceadjustability.

Curvilinear corner shapes plan in36�, 42� or 48� VDT cornerapplications, with3/4� finger/cordclearance around table. Specify23�D for adjacent 24�Dworksurfaces, 29�D for adjacent30�D worksurfaces. Straight splittop fits in 30�, 36�, 42� or 48�W,30�D space in Morrison or Reffplanning, or 28�, 34�. 40�, or 46�space in Equity planning.

Counterforce tables may be adjustedby user from 26� - 41� high, withfingertip control. Base may beadjusted to counterbalance 0 - 80lb.load on split-top tables.

All bases provide integral, lay-inwire management in legs andhorizontal beam.

Locking casters may be ordered toreplace glides. Casters raise topheight range by 11/2�. (SeeAccessories, page 159).

Knoll Office Tables

104

C-leg tables, Counterforce™ corners and split-topsInteraction tops


M/L/P V1 V2

Straight split-top for Equity Counterforce 271/2� 29� 26� - 41� IT S3ODSCM $3,876. n/a n/a331/2� 29� 26� - 41� IT S36DSCM 3,947. n/a n/a391/2� 29� 26� - 41� IT S42DSCM 4,018. n/a n/a45� 29� 26� - 41� IT S48DSCM 4,087. n/a n/a

Order Code

Example: IT C42SSCM; 117, 117,117, T1

I Interaction TableT Interaction topC Corner shape42 SizeS DepthS Split-topC Counterforce baseM Top type117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish






Application Notes

C-leg Counterforce tables may beplanned with any Knoll system toprovide high performanceadjustability.

Curvilinear corner shapes plan in36�, 42� or 48� VDT cornerapplications, with3/4� finger/cordclearance around table. Specify23�D for adjacent 24�Dworksurfaces, 29�D for adjacent30�D worksurfaces. Straight splittop fits in 30�, 36�, 42� or 48�W,30�D space in Morrison or Reffplanning, or 28�, 34�. 40�, or 46�space in Equity planning.

Counterforce tables may be adjustedby user from 26� - 41� high, withfingertip control. Base may beadjusted to counterbalance 0 - 80lb.load on split-top tables.

All bases provide integral, lay-inwire management in legs andhorizontal beam.

Locking casters may be ordered toreplace glides. Casters raise topheight range by 11/2�. (SeeAccessories, page 159).

Knoll Office Tables

105

Inte

ract

ion

T-leg and column base tables, file topInteraction tops

description w d h pattern no.laminate

M/L/P V1 V2

Racetrack shape T-leg table 73� 37� 28� IT O7236 T( ) $1,184. $1,706. $2,048.85� 37� 28� IT O8436 T( ) 1,302. 1,876. 2,251.

Large round column base table – 60� 285/8� IT R6000 Z( ) 1,341. 1,917. 2,329.

Amoeba shape column base table 60� 60� 285/8� IT A6060 Z( ) 1,620. 2,316. 2,817.

Order Code

Example: IT A6060 ZM; 117, 177,117, T2

I InteractionT Interaction topA Amoeba60 Width60 DepthZ Columns baseM Top type117 Top finish117 Soft grey top edge117 Soft grey baseT2 Trim ring finish





Grommet Options:Add suffix G for racetrack largeround, amoeba, or bat shape tablewith center grommet, 3� diameter.


Application Notes

Amoeba-shape column base table isideal for team workspaces. Amoebameasures 70� diagonally.

Bat-shape column base table worksinteractively with 36� diametertables. Actual dimension frominside curve to inside curve is 40�.

Specify glide extenders for bat whenaligning with fixed height roundtables.

T-leg and column-base tables arefixed at 28�H. Stacking glideextenders raise top height in1/2�increments. (See Accessories,p.159)

Racetrack-shape file top may beused to create file island with3-drawer lateral files. 72� racetrackmay be set on top of back-to-back36� wide files; 96� racetrack fitsabove cluster of four 30� wide files.

T-leg and column-base tables maybe used with any Knoll system.

Knoll Office Tables

106

T-leg and column base tables, file topInteraction tops


M/L/P V1 V2

Bat shape column base table 48� 60� 285/8� IT A4860 Z( ) $1,620. $2,316. $2,817.

Racetrack shape file top (no base) 73� 37� 1� IT O7236 N( ) 600. 969. 1,278.97� 37� 1� IT O9636 N( ) 704. 1,124. 1,472.

Order Code

Example: IT A6060 ZM; 117, 177,117, T2

I InteractionT Interaction topA Amoeba60 Width60 DepthZ Columns baseM Top type117 Top finish117 Soft grey top edge117 Soft grey baseT2 Trim ring finish





Grommet Options:Add suffix G for racetrack largeround, amoeba, or bat shape tablewith center grommet, 3� diameter.


Application Notes

Amoeba-shape column base table isideal for team workspaces. Amoebameasures 70� diagonally.

Bat-shape column base table worksinteractively with 36� diametertables. Actual dimension frominside curve to inside curve is 40�.

Specify glide extenders for bat whenaligning with fixed height roundtables.

T-leg and column-base tables arefixed at 28�H. Stacking glideextenders raise top height in1/2�increments. (See Accessories,p.159)

Racetrack-shape file top may beused to create file island with3-drawer lateral files. 72� racetrackmay be set on top of back-to-back36� wide files; 96� racetrack fitsabove cluster of four 30� wide files.

T-leg and column-base tables maybe used with any Knoll system.

Knoll Office Tables

107

Inte

ract

ion

Four-star base, fixed and adjustable heightMorrison topsround

description type w d h pattern no. laminate L veneer V1 V2

Round table Fixed height 30� 29� IN R3000 X( ) $890. $1,056. $1,216.36� 29� IN R3600 X( ) 915. 1,085. 1,248.42� 29� IN R4200 X( ) 969. 1,148. 1,324.48� 29� IN R4800 X( ) 1,172. 1,387. 1,601.

Fixed height with casters 30� 29� IN R3000 W( ) 917. 1,087. 1,253.36� 29� IN R3600 W( ) 941. 1,116. 1,286.42� 29� IN R4200 W( ) 995. 1,180. 1,358.

Adjustable 30� 251/4� - 301/4� IN R3000 Y( ) 1,200. 1,425. 1,639.36� 251/4� - 301/4� IN R3600 Y( ) 1,264. 1,496. 1,723.42� 251/4� - 301/4� IN R4200 Y( ) 1,344. 1,591. 1,835.48� 251/4� - 301/4� IN R4800 Y( ) 1,698. 2,012. 2,317.

Order Code

Example: IN R3600 XV; V9, 117,T2

I Interaction TableN Morrison topR Round36 DiameterX Base typeV Top typeV9 Top finish117 Base finishT2 Trim ring finish



Specify top types:L Plastic laminatesV Veneer

Specify color fields:

Top finishBase finishTrim ring finish

Note: All veneer Morrison topscome with matching veneer edge.

Application Notes

Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.

Fixed height four-star base tablesare 29�H. Adjustable tables may bemanually adjusted for any top heightfrom 251/4� - 301/4� using a hexwrench.



Knoll Office Tables

108

C-leg tables, fixed heightMorrison tops

description w d h pattern no. laminate L veneer V1 V2

Rectangular fixed height table 30� 235/8� 283/8� IN S3024 B( ) $738. $925. $1,113.30� 295/8� 283/8� IN S3030 B( ) 799. 1,002. 1,200.36� 235/8� 283/8� IN S3624 B( ) 769. 963. 1,156.36� 295/8� 283/8� IN S3630 B( ) 828. 1,037. 1,245.42� 235/8� 283/8� IN S4224 B( ) 799. 1,002. 1,200.42� 295/8� 283/8� IN S4230 B( ) 859. 1,074. 1,290.48� 235/8� 283/8� IN S4824 B( ) 828. 1,037. 1,245.48� 295/8� 283/8� IN S4830 B( ) 888. 1,113. 1,332.60� 235/8� 283/8� IN S6024 B( ) 888. 1,113. 1,332.60� 295/8� 283/8� IN S6030 B( ) 947. 1,184. 1,424.

Curvilinear corner fixed height table 42� 235/8� 283/8� IN C4224 B( ) 1,125. 1,406. 1,687.48� 235/8� 283/8� IN C4824 B( ) 1,212. 1,515. 1,818.48� 295/8� 283/8� IN C4830 B( ) 1,283. 1,603. 1,923.

Order Code

Example: IN S4824 BL; 117, 117,T1

I Interaction TableN Morrison 11/4� topS Straight48 Width24 DepthB Base typeL Top type117 Top finish117 Base finishT1 Trim ring finish


Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top typeSpecify top types:L Plastic laminateV Veneer

Specify color fields:Top finishBase finishTrim ring finish


Application Notes

Fixed height tables provideportable, independent surfaces inopen plan workstations or privateoffices.

Fixed height C-leg tables may beused interactively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.

Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.

Stacking glide extenders raise topheight in1/2� increments.

Rectangular tables accommodate18�D suspended, floorstanding ormobile pedestals; 30�D tablesaccommodate 24�D pedestals.

Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal.

Knoll Office Tables

109

Mor

riso

nS

yste

mTo

pTa

bles

C-leg tables, manually adjustableMorrison tops


Rectangular manually adjustable table 30� 235/8� 26� - 291/2� IN S3024 A ( ) $1,022. $1,208. $1,395.30� 295/8� 26� - 291/2� IN S3030 A ( ) 1,082. 1,283. 1,484.36� 235/8� 26� - 291/2� IN S3624 A ( ) 1,051. 1,246. 1,435.36� 295/8� 26� - 291/2� IN S3630 A ( ) 1,113. 1,319. 1,525.42� 235/8� 26� - 291/2� IN S4224 A ( ) 1,082. 1,283. 1,484.42� 295/8� 26� - 291/2� IN S4230 A ( ) 1,142. 1,355. 1,571.48� 235/8� 26� - 291/2� IN S4824 A ( ) 1,113. 1,319. 1,525.48� 295/8� 26� - 291/2� IN S4830 A ( ) 1,172. 1,395. 1,614.60� 235/8� 26� - 291/2� IN S6024 A ( ) 1,172. 1,395. 1,614.60� 295/8� 26� - 291/2� IN S6030 A ( ) 1,228. 1,465. 1,704.

Curvilinear corner manually adjustable table 42� 235/8� 26� - 291/2� IN C4224 A ( ) 1,406. 1,689. 1,969.48� 235/8� 26� - 291/2� IN C4824 A ( ) 1,492. 1,795. 2,100.48� 295/8� 26� - 291/2� IN C4830 A ( ) 1,563. 1,884. 2,206.

Order Code

Example: IN S4830 AV; V9, 117,T4

I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthA Base typeV Top typeV9 Top finish117 Base finishT4 Trim ring finish



Specify top type:L Plastic laminateV Veneer



Application Notes

Manually adjustable tables provideportable, adjustable height surfacesin open plan workstations or privateoffices.

C-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.

Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.


Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 159).

Knoll Office Tables

110

C-leg tables, crank adjustableMorrison tops


Rectangular adjustable table 30� 235/8� 231/4� - 35� IN S3024 D(R/L)( ) $1,970. $2,158. $2,342.30� 295/8� 231/4� - 35� IN S3030 D(R/L)( ) 2,030. 2,230. 2,432.36� 235/8� 231/4� - 35� IN S3624 D(R/L)( ) 2,000. 2,194. 2,385.36� 295/8� 231/4� - 35� IN S3630 D(R/L)( ) 2,059. 2,269. 2,475.42� 235/8� 231/4� - 35� IN S4224 D(R/L)( ) 2,030. 2,230. 2,432.42� 295/8� 231/4� - 35� IN S4230 D(R/L)( ) 2,089. 2,305. 2,520.48� 235/8� 231/4� - 35� IN S4824 D(R/L)( ) 2,059. 2,269. 2,475.48� 295/8� 231/4� - 35� IN S4830 D(R/L)( ) 2,121. 2,342. 2,564.60� 235/8� 231/4� - 35� IN S6024 D(R/L)( ) 2,121. 2,342. 2,564.60� 295/8� 231/4� - 35� IN S6030 D(R/L)( ) 2,178. 2,342. 2,564.

Curvilinear corner adjustable table 42� 235/8� 231/4� - 35� IN C4224 D( ) 2,356. 2,503. 2,918.48� 235/8� 231/4� - 35� IN C4824 D( ) 2,441. 2,746. 3,047.48� 295/8� 231/4� - 35� IN C4830 D( ) 2,513. 2,834. 3,155.

Order Code

Example: IN S4830 DRV; V9, 117,T4

I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthD Base typeR Right handle locationV Top typeV9 Top finish117 Base finishT4 Trim ring finish


Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location10. Top type


Handle location (rectangular only):R Right handL Left hand



Application Notes

Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.

Crank adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.

The hand crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.

Actual rectangular table widths are1� less than nominal. Actual cornertable widths are 11/2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

111

Mor

riso

nS

yste

mTo

pTa

bles

C-leg tables, Counterforce™ adjustableMorrison tops


Rectangular counterbalanced table 29� 23� 26� - 41� IN S3024 C( ) $2,856. $3,040. $3,225.29� 29� 26� - 41� IN S3030C( ) 2,915. 3,114. 3,316.35� 23� 26� - 41� IN S3624 C( ) 2,885. 3,077. 3,268.35� 29� 26� - 41� IN S3630 C( ) 2,945. 3,153. 3,357.41� 23� 26� - 41� IN S4224 C( ) 2,915. 3,114. 3,316.41� 29� 26� - 41� IN S4230 C( ) 2,974. 3,188. 3,403.47� 23� 26� - 41� IN S4824 C( ) 2,945. 3,153. 3,357.47� 29� 26� - 41� IN S4830 C( ) 3,005. 3,225. 3,447.59� 23� 26� - 41� IN S6024 C( ) 3,005. 3,225. 3,447.59� 29� 26� - 41 IN S6030 C( ) 3,062. 3,298. 3,536.

Order Code

Example: IN S4824 CL; 117, 117,T2

I Interaction TableN Morrison 11/4� topS Rectangular48 Width24 Depth of returnC Base typeL Top type117 Top finish117 Base finishT2 Trim ring finish






Application Notes

Adjustable height Counterforce™-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.

Fingertip control allows user toadjust from seated- to standing-workheight (26�-41�) without tools oreffort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.

Note:24�D rectangular Counterforcetables provide only 16�D clearkneespace inside 12�H crossbeam,12� above the floor. ANSI/BIFMArecommends minimum 15�Dkneespace, increasing on a diagonalto 23�D at toe height.

Actual rectangular table widthsare3/16� less than nominal. Forcorner Counterforce applications,see page 104.

Knoll Office Tables

112

T-leg tablesMorrison tops


Straight table 48� 295/8� 283/8� IN S4830T ( ) $888. $1,113. $1,332.48� 355/8� 283/8� IN S4836T ( ) 947. 1,184. 1,424.60� 295/8� 283/8� IN S6030T ( ) 947. 1,184. 1,424.60� 355/8� 283/8� IN S6036T ( ) 1,022. 1,274. 1,600.72� 295/8� 283/8� IN S7230T ( ) 1,022. 1,274. 1,600.72� 355/8� 283/8� IN S7236T ( ) 1,073. 1,337. 1,679.

Rounded end table 63� 30� 283/8� IN U6330T ( ) 1,245. 1,556. 1,865.66� 36� 283/8� IN U6636T ( ) 1,332. 1,666. 1,999.75� 30� 283/8� IN U7530T ( ) 1,332. 1,666. 1,999.78� 36� 28 3/8 IN U7836T ( ) 1,424. 1,776. 2,132.

Order Code

Example: IN U6330TL; 117, 117,T1

I Interaction TableN Morrison 11/4� topU Rounded end63 Width30 DepthT Base typeL Top type117 Top finish117 Base finishT1 Trim ring finish






Application Notes

T-leg tables provide shared meetingand work surfaces in conjunctionwith Morrison System or otherInteraction tables. Tops are standarddetail Morrison 11/4�.

T-leg base tables are fixed at283/8�H. Tables may be increased inheight in1/2� increments byspecifying extender glides (seeAccessories, p. 159).

Knoll Office Tables

113

Mor

riso

nS

yste

mTo

pTa

bles

C-leg tables, split topMorrison tops


Split-top straight table Fixed height 35� 295/8� 283/8� IN S36DS B( ) $1,957. $2,164. $2,372.41� 295/8� 283/8� IN S42DS B( ) 1,988. 2,201. 2,416.47� 295/8� 283/8� IN S48DS B( ) 2,018. 2,241. 2,462.

Manually adjustable 35� 295/8� 26� - 291/2� IN S36DS A( ) 2,241. 2,445. 2,653.41� 295/8� 26� - 291/2� IN S42DS A( ) 2,270. 2,482. 2,699.47� 295/8� 26� - 291/2� IN S48DS A( ) 2,300. 2,521. 2,742.

Crank adjustable 35� 295/8� 231/4� - 35� IN S36DS D( ) 3,188. 3,390. 3,602.41� 295/8� 231/4� - 35� IN S42DS D( ) 3,218. 3,431. 3,648.47� 295/8� 231/4� - 35� IN S48DS D( ) 3,249. 3,469. 3,690.

Split-top corner table Fixed height 47� 235/8� 283/8� IN C48SS B( ) 2,340. 2,643. 2,946.47� 295/8� 283/8� IN C48DS B( ) 2,409. 2,730. 3,049.

Manually adjustable 47� 235/8� 26� - 291/2� IN C48SS A( ) 2,621. 2,922. 3,226.47� 295/8� 26� - 291/2� IN C48DS A( ) 2,692. 3,011. 3,333.

Crank adjustable 47� 235/8� 231/4� - 35� IN C48SS D( ) 3,569. 3,871. 4,094.47� 295/8� 231/4� - 35� IN C48DS D( ) 3,640. 3,959. 4,281.

Order Code

Example: IN S36DS AL; 117, 117,T2

I Interaction TableN Morrison 11/4� topS Straight36 WidthD 30� DeepS Split-topA Base typeL Top type117 Top finish117 Base finishT2 Trim ring finish


Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top typeBase types:A AdjustableB Fixed heightD CrankSpecify top types:L Plastic laminateV Veneer

Specify color fields:Trim ring finishTop finishBase finish


Application Notes

Split-top C-leg tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based or freestandingMorrison planning, with tops tomatch 11/4� worksurfaces.

Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted −/+15°.

Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 283/8�H.

Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle is locatedin front center of rear surface.

Glides permit 1/2� leveling. Castersraise heights 11/2�. For Counterforcesplit-top applications, see page 104.

Knoll Office Tables

114

C-leg tables, keyboard cutoutMorrison tops


Straight table with keyboard cutout Fixed height 36� 295/8� 283/8� IN S36DK B( ) $1,395. $1,602. $1,808.42� 295/8� 283/8� IN S42DK B( ) 1,425. 1,638. 1,854.48� 295/8� 283/8� IN S48DK B( ) 1,454. 1,675. 1,896.

Manually adjustable 36� 295/8� 26� - 291/2� IN S36DK A( ) 1,675. 1,883. 2,089.42� 295/8� 26� - 291/2� IN S42DK A( ) 1,705. 1,920. 2,134.48� 295/8� 26� - 291/2� IN S48DK A( ) 1,735. 1,957. 2,178.

Curvilinear corner table with keyboard cutout Fixed height 42� 235/8� 283/8� IN C42SK B( ) 1,689. 1,970. 2,251.48� 235/8� 283/8� IN C48SK B( ) 1,775. 2,078. 2,381.48� 295/8� 283/8� IN C48DK B( ) 1,845. 2,165. 2,487.

Manually adjustable 42� 235/8� 26� - 291/2� IN C42SK A( ) 1,970. 2,252. 2,533.48� 235/8� 26� - 291/2� IN C48SK A( ) 2,057. 2,361. 2,664.48� 295/8� 26� - 291/2� IN C48DK A( ) 2,129. 2,446. 2,771.

Order Code

Example: IN S36DK AL; 117, 117,T4

I Interaction TableN Morrison 11/4� topS Straight36 WidthD DepthK Keyboard cutoutA Base typeL Top type117 Top finish117 Base finishT4 Trim ring finish



Base types:A AdjustableB Fixed height

Specify top types:L Plastic laminateV Veneer



Application Notes

C-leg tables with keyboard cutoutprovide easy adjustability ofkeyboard surface. C-leg tables maybe used interactively in panel-basedor freestanding Morrison, with topsto match 11/4� worksurfaces.

Handle under keyboard tray allowsuser to adjust keyboard surfacefrom1/2� above to 51/2� below table.Keyboard tray has variable tilt from-15° to +15°.

Manually adjustable table base maybe adjusted to allow rear top heightat any1/2� increment from 26� to291/2�. Fixed height table base fixesrear worksurface at 283/8�H. Glidespermit 1/2� leveling. Stackableextender glides raise top heightin1/2� increments. (See Accessories,p. 159).

Cutout size is 211/2�W x 13�D.

Knoll Office Tables

115

Mor

riso

nS

yste

mTo

pTa

bles

C-leg tables, top crank adjustableMorrison tops


Rectangular adjustable table 30� 24� 271/4� - 431/4� IN S3024 K( ) $1,606. $1,759. $1,910.30� 30� 271/4� - 431/4� IN S3030 K( ) 1,656. 1,819. 1,983.36� 24� 271/4� - 431/4� IN S3624 K( ) 1,631. 1,790. 1,945.36� 30� 271/4� - 431/4� IN S3630 K( ) 1,679. 1,849. 2,019.42� 24� 271/4� - 431/4� IN S4224 K( ) 1,656. 1,819. 1,983.42� 30� 271/4� - 431/4� IN S4230 K( ) 1,704. 1,878. 2,055.48� 24� 271/4� - 431/4� IN S4824 K( ) 1,679. 1,849. 2,019.48� 30� 271/4� - 431/4� IN S4830 K( ) 1,728. 1,910. 2,089.60� 24� 271/4� - 431/4� IN S6024 K( ) 1,728. 1,910. 2,089.60� 30� 271/4� - 431/4� IN S6030 K( ) 1,776. 1,910. 2,052.

Curvilinear corner adjustable table 42� 24� 271/4� - 431/4� IN C4224 K( ) 1,921. 2,040. 2,380.48� 24� 271/4� - 431/4� IN C4824 K( ) 1,992. 2,238. 2,485.48� 30� 271/4� - 431/4� IN C4830 K( ) 2,049. 2,311. 2,572.

Rect. Split-top adj., top crank 36� 30� 271/4� - 431/4� IN S36DS K( ) 2,599. 2,765. 2,939.42� 30� 271/4� - 431/4� IN S42DS K( ) 2,624. 2,797. 2,974.48� 30� 271/4� - 431/4� IN S48DS K( ) 2,649. 2,830. 3,010.

Curv. corner split-top adj., top crank table 47� 235/8� 26� - 42� IN C48SS K( ) 2,911. 3,157. 3,338.47� 295/8� 26� - 42� IN C48DS K( ) 2,969. 3,228. 3,491.

Order Code

Example: IN S4830 K;L, 117, 117

I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthK Base typeL Top type117 Top finish117 Base finish

Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.



Base types:K Top crank


Specify color fields:Top finishBase finish


Application Notes



The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip is softtextured rubber over steel.

Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.

Knoll Office Tables

116

C-leg tables, electric adjustableMorrison tops


Rectangular electric adj. table 30� 24� 271/4� - 431/4� IN S3024 E( ) $2,328. $2,479. $2,630.30� 30� 271/4� - 431/4� IN S3030 E( ) 2,376. 2,540. 2,703.36� 24� 271/4� - 431/4� IN S3624 E( ) 2,351. 2,510. 2,664.36� 30� 271/4� - 431/4� IN S3630 E( ) 2,401. 2,571. 2,737.42� 24� 271/4� - 431/4� IN S4224 E( ) 2,376. 2,540. 2,703.42� 30� 271/4� - 431/4� IN S4230 E( ) 2,424. 2,599. 2,776.48� 24� 271/4� - 431/4� IN S4824 E( ) 2,401. 2,571. 2,737.48� 30� 271/4� - 431/4� IN S4830 E( ) 2,449. 2,630. 2,810.60� 24� 271/4� - 431/4� IN S6024 E( ) 2,449. 2,630. 2,810.60� 30� 271/4� - 431/4� IN S6030 E( ) 2,497. 2,689. 2,884.

Curvilinear corner electric adj. table 36� 24� 271/4� - 431/4� IN C3624 E( ) 2,529. 2,783. 3,036.42� 24� 271/4� - 431/4� IN C4224 E( ) 2,586. 2,851. 3,102.48� 24� 271/4� - 431/4� IN C4824 E( ) 2,656. 2,931. 3,196.48� 30� 271/4� - 431/4� IN C4830 E( ) 2,701. 2,987. 3,266.

Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IN C48SS E( ) 3,574. 3,849. 4,115.48� 30� 271/4� - 431/4� IN C48DS E( ) 3,619. 3,905. 4,184.

Order Code

Example: IN S4830 EL; 117, 117

I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthE Base typeL Top type117 Top finish117 Base finish



Base types:E Electric




Application Notes

Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.

Electric adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.

The electric adjustment mechanismeasily lifts up to 200 pounds.Mechanism adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation.

Rectangular table widths are 2� lessthan actual while depth is 1� lessthan actual for safety.Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.

Knoll Office Tables

117

Mor

riso

nS

yste

mTo

pTa

bles

Four-star base, fixed and adjustable heightEquity tops 2mm edge and 24mm waterfall edgeround

description type w d h pattern no.solid

PVC edgewoodgrainPVC edge

metaledge

Round table2mm edge

Fixed height 30� 29� IE R3000 X2 $890. $922. $954.36� 29� IE R3600 X2 915. 959. 978.42� 29� IE R4200 X2 969. 1,002. 1,033.48� 29� IE R4800 X2 1,172. 1,204. 1,236.

Fixed height with casters 30� 29� IE R3000 W2 917. 948. 981.36� 29� IE R3600 W2 941. 973. 1,005.42� 29� IE R4200 W2 995. 1,028. 1,059.

Adjustable 30� 251/4� - 301/4� IE R3000 Y2 1,200. 1,233. 1,265.36� 251/4� - 301/4� IE R3600 Y2 1,264. 1,295. 1,326.42� 251/4� - 301/4� IE R4200 Y2 1,344. 1,375. 1,406.48� 251/4� - 301/4� IE R4800 Y2 1,698. 1,731. 1,762.

Order Code

Example: IE R3600 X3; 117, 117,117, T1

I Interaction TableE Equity topR Round36 DiameterX Base type117 Top finish117 Edge finish117 Base finishT1 Trim ring finish


Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type


Application Notes





Note: Y2 in the pattern number forthe adjustable table refers to Y(base type) and 2 (edge finish),not Y2 Medium Grey.

Knoll Office Tables

118

Four-star base, fixed and adjustable heightEquity tops 2mm edge and 24mm waterfall edgeround



metaledge

Round table24mm waterfall edge

Fixed height 30� 29� IE R3000 X3 $1,063.36� 29� IE R3600 X3 1,120.42� 29� IE R4200 X3 1,175.48� 29� IE R4800 X3 1,424.

Fixed height with casters 30� 29� IE R3000 W3 1,089.36� 29� IE R3600 W3 1,147.42� 29� IE R4200 W3 1,200.

Adjustable 30� 251/4� - 301/4� IE R3000 Y3 1,410.36� 251/4� - 301/4� IE R3600 Y3 1,468.42� 251/4� - 301/4� IE R4200 Y3 1,549.48� 251/4� - 301/4� IE R4800 Y3 1,948.

Order Code

Example: IE R3600 X3; 117, 117,117, T1

I Interaction TableE Equity topR Round36 DiameterX Base type117 Top finish117 Edge finish117 Base finishT1 Trim ring finish




Application Notes






Knoll Office Tables

119

Equ

ityS

yste

mTo

pTa

bles

C-leg tables, fixed heightEquity tops

description w d h pattern no.solid


metaledge

Straight fixed height table 281/2� 231/2� 283/8� IE S3024 B2 $738. $770. $803.281/2� 291/2� 283/8� IE S3030 B2 799. 831. 862.341/2� 231/2� 283/8� IE S3624 B2 769. 801. 833.341/2� 291/2� 283/8� IE S3630 B2 828. 860. 891.401/2� 231/2� 283/8� IE S4224 B2 799. 831. 862.401/2� 291/2� 283/8� IE S4230 B2 859. 890. 922.461/2� 231/2� 283/8� IE S4824 B2 828. 860. 891.461/2� 291/2� 283/8� IE S4830 B2 888. 919. 952.581/2� 231/2� 283/8� IE S6024 B2 888. 919. 952.581/2� 291/2� 283/8� IE S6030 B2 947. 979. 1,011.701/2� 231/2� 283/8� IE S7224 B2 947. 979. 1,011.701/2� 291/2� 283/8� IE S7230 B2 1,007. 1,039. 1,071.

Curvilinear corner fixed height table 411/2� 231/2� 283/8� IE C4224 B2 1,125. 1,158. 1,189.471/2� 231/2� 283/8� IE C4824 B2 1,212. 1,244. 1,275.471/2� 291/2� 283/8� IE C4830 B2 1,283. 1,316. 1,347.

Order Code

Example: IE S3624 B2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topS Straight36 Width24 DepthB2 Fixed Height, 2mm top

edge117 Top finish117 Edge finish117 Base finishT1 Trim ring finish

SpecificationInformation



Application Notes

Fixed height tables provideportability in open planworkstations or private offices.

Fixed height C-leg tables may beused interactively in panel-basedEquity planning.

Panel-mounted worksurfacesadjacent to curvilinear corner tablesmust be cantilevered, or desk endpanel supported.


Specify extender glides (see p. 159)for alignment with Equitypanel-mounted worksurfaces.

Rectangular tables accommodate18�D suspended floorstanding ormobile Equity pedestals; 30�Dtables accommodate 24�Dpedestals. Specify extender glidesfor tables with floorstandingpedestals.

Knoll Office Tables

120

C-leg tables, manually adjustableEquity tops



metaledge

Straight manually adjustable table 281/2� 231/2� 26�- 291/2� IE S3024 A2 $1,022. $1,054. $1,086.281/2� 291/2� 26�- 291/2� IE S3030 A2 1,082. 1,114. 1,145.341/2� 231/2� 26�- 291/2� IE S3624 A2 1,051. 1,084. 1,115.341/2� 291/2� 26�- 291/2� IE S3630 A2 1,113. 1,144. 1,175.401/2� 231/2� 26�- 291/2� IE S4224 A2 1,082. 1,114. 1,145.401/2� 291/2� 26�- 291/2� IE S4230 A2 1,142. 1,173. 1,205.461/2� 231/2� 26�- 291/2� IE S4824 A2 1,113. 1,144. 1,175.461/2� 291/2� 26�- 291/2� IE S4830 A2 1,172. 1,204. 1,236.581/2� 231/2� 26�- 291/2� IE S6024 A2 1,172. 1,204. 1,236.581/2� 291/2� 26�- 291/2� IE S6030 A2 1,228. 1,260. 1,292.701/2� 231/2� 26�- 291/2� IE S7224 A2 1,228. 1,260. 1,292.701/2� 291/2� 26�- 291/2� IE S7230 A2 1,290. 1,321. 1,352.

Curvilinear corner manually adjustable table 411/2� 231/2� 26�- 291/2� IE C4224 A2 1,406. 1,437. 1,468.471/2� 231/2� 26�- 291/2� IE C4824 A2 1,492. 1,524. 1,556.471/2� 291/2� 26�- 291/2� IE C4830 A2 1,563. 1,595. 1,627.

Order Code

Example: IE C4830 A2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthA2 Adjustable, 2mm top

edge117 Top finish117 Edge finish117 Base finishT1 Trim ring




Application Notes

Manually adjustable height tablesprovide portable, adjustablesurfaces in open plan workstationsor private offices.

Manually adjustable height C legtables may be used interactively inpanel-based Equity planning.



Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. (See Accessories,p. 159)

Knoll Office Tables

121

Equ

ityS

yste

mTo

pTa

bles

C-leg tables, crank adjustableEquity tops



metaledge

Straight crank adjustable table 281/2� 231/2� 231/4�- 35� IE S3024 D(R/L)2 $1,943. $1,975. $2,006.281/2� 291/2� 231/4�- 35� IE S3030 D(R/L)2 2,030. 2,062. 2,094.341/2� 231/2� 231/4�- 35� IE S3624 D(R/L)2 2,000. 2,031. 2,063.341/2� 291/2� 231/4�- 35� IE S3630 D(R/L)2 2,059. 2,091. 2,125.401/2� 231/2� 231/4�- 35� IE S4224 D(R/L)2 2,018. 2,049. 2,080.401/2� 291/2� 231/4�- 35� IE S4230 D(R/L)2 2,089. 2,122. 2,155.461/2� 231/2� 231/4�- 35� IE S4824 D(R/L)2 2,059. 2,091. 2,125.461/2� 291/2� 231/4�- 35� IE S4830 D(R/L)2 2,121. 2,154. 2,185.581/2� 231/2� 231/4�- 35� IE S6024 D(R/L)2 2,121. 2,154. 2,185.581/2� 291/2� 231/4�- 35� IE S6030 D(R/L)2 2,178. 2,211. 2,242.

Curvilinear corner crank adjustable table 411/2� 231/2� 231/4�- 35� IE C4224 D2 2,356. 2,387. 2,419.471/2� 231/2� 231/4�- 35� IE C4824 D2 2,441. 2,473. 2,505.471/2� 291/2� 231/4�- 35� IE C4830 D2 2,511. 2,542. 2,574.

Order Code

Example: IE C4830 D2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthD Crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finishT1 Trim ring finish

Pattern number logic:

1. Interaction table2. System top3. Top shape4-7. Top size8. Base type

Handle location (rectangular only):

R Right handL Left hand


Application Notes


Crank adjustable C leg tables maybe used interactively in panel-basedEquity planning.

Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.

Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

122

C-leg tables, Counterforce™ adjustableEquity tops



metaledge

Straight counterforce table 271/2� 23� 26� - 41� IE S3024 C2 $2,856. $2,887. $2,918.271/2� 29� 26� - 41� IE S3030 C2 2,915. 2,946. 2,978.331/2� 23� 26� - 41� IE S3624 C2 2,885. 2,916. 2,947.331/2� 29� 26� - 41� IE S3630 C2 2,945. 2,976. 3,008.391/2� 23� 26� - 41� IE S4224 C2 2,915. 2,946. 2,978.391/2� 29� 26� - 41� IE S4230 C2 2,974. 3,006. 3,037.451/2� 23� 26� - 41� IE S4824 C2 2,945. 2,976. 3,008.451/2� 29� 26� - 41� IE S4830 C2 3,005. 3,036. 3,067.571/2� 23� 26� - 41� IE S6024 C2 3,005. 3,036. 3,067.571/2� 29� 26� - 41� IE S6030 C2 3,062. 3,093. 3,125.

Order Code

Example: IE S4830 C2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topS Top shape48 Width30 DepthC2 Base type, 2mm top edge117 Top finish117 Edge finish117 Base finishT1 Trim ring

Specifiation Information



Application Notes

Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-based Equityplanning.

Fingertip control allows user toadjust from seated to standing-workheight (26� - 41�) without tools oreffort. Counterforce tables may beadjusted by the user tocounterbalance loads of 0-90 lbs.

Worksurfaces adjacent tocurvilinear corner tables must becantilevered not desk endpanel-supported.


Note:24�D Counterforce tables provideonly 16� clear kneespace inside the121/4� cross-beam, 12� above thefloor. ANSI/BIFMA recommendsminimum 19�D kneespace,increasing to 23�D at toe height.

For corner Counterforceapplications, see page 104.

Knoll Office Tables

123

Equ

ityS

yste

mTo

pTa

bles

T-leg tablesEquity tops



metaledge

Straight table 461/2� 291/2� 283/8� IE S4830 T2 $888. $919. $952.461/2� 351/2� 283/8� IE S4836 T2 947. 979. 1,011.581/2� 291/2� 283/8� IE S6030 T2 947. 979. 1,011.581/2� 351/2� 283/8� IE S6036 T2 1,022. 1,054. 1,086.701/2� 291/2� 283/8� IE S7230 T2 1,022. 1,054. 1,086.701/2� 351/2� 283/8� IE S7236 T2 1,073. 1,106. 1,138.

Rounded end table 63� 30� 283/8� IE U6330 T2 1,245. 1,276. 1,308.66� 36� 283/8� IE U6636 T2 1,332. 1,364. 1,397.75� 30� 283/8� IE U7530 T2 1,332. 1,364. 1,397.78� 36� 283/8� IE U7836 T2 1,424. 1,455. 1,486.

Order Code

Example: IE U7530 T2; 117, 117,117, T1

I Interaction TableE Equity topU Rounded end75 Width30 DepthT2 Base type, 2mm top edge117 Top finish117 Base finish117 Top edge finishT1 Trim ring finish




Application Notes

T-leg tables provide shared meetingor worksurfaces in conjunction withEquity or other Interaction tables.

T-leg base tables are fixed at283/8�H. Stacking glide extendersmay be specified to increase tableheight in1/2� increments. (SeeAccessories, p. 159)

Knoll Office Tables

124

C-leg tables, split-topEquity tops



metaledge

Split-top straight table Fixed height 331/2� 291/2� 283/8� IE S36DS B2 $1,957. $1,990. $2,021.451/2� 291/2� 283/8� IE S48DS B2 2,018. 2,049. 2,080.

Manually adjustable 331/2� 291/2� 26� - 291/2� IE S36DS A2 2,241. 2,272. 2,304.451/2� 291/2� 26� - 291/2� IE S48DS A2 2,300. 2,332. 2,363.

Crank adjustable 331/2� 291/2� 231/2�- 35� IE S36DS D2 3,188. 3,219. 3,251.451/2� 291/2� 231/2�- 35� IE S48DS D2 3,249. 3,280. 3,311.

Split-top curvilinear corner table Fixed height 47� 231/2� 283/8� IE C48SS B2 2,340. 2,371. 2,402.47� 291/2� 283/8� IE C48DS B2 2,409. 2,440. 2,472.

Manually adjustable 47� 231/2� 26� - 291/2� IE C48SS A2 2,621. 2,652. 2,683.47� 291/2� 26� - 291/2� IE C48DS A2 2,692. 2,724. 2,755.

Crank adjustable 47� 231/2� 231/2�- 35� IE C48SS D2 3,569. 3,600. 3,632.47� 291/2� 231/2�- 35� IE C48DS D2 3,640. 3,673. 3,704.

Order Code

Example: IE S36DS A2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topS Straight36 WidthD DepthS Split topA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring



Specify Color fields:Top finishTop edge finishBase finishTrim ring finish

Application Notes

Split-top tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based Equity planning.

Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted +/-15°.


Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located in frontcenter of rear worksurface.


Knoll Office Tables

125

Equ

ityS

yste

mTo

pTa

bles

C-leg tables, keyboard cutoutEquity tops



metaledge

Straight table with keyboard cutout Fixed height 341/2� 291/2� 283/8� IE S36DK B2 $1,395. $1,426. $1,457.461/2� 291/2� 283/8� IE S48DK B2 1,454. 1,485. 1,516.

Manually adjustable 341/2� 291/2� 26� - 291/2� IE S36DK A2 1,675. 1,707. 1,738.461/2� 291/2� 26� - 291/2� IE S48DK A2 1,735. 1,766. 1,797.

Curvilinear corner table with keyboard cutout Fixed height 411/2� 231/2� 283/8� IE C42SK B2 1,689. 1,721. 1,752.471/2� 231/2� 283/8� IE C48SK B2 1,775. 1,806. 1,838.471/2� 291/2� 283/8� IE C48DK B2 1,845. 1,876. 1,908.

Manually adjustable 411/2� 231/2� 26� - 291/2� IE C42SK A2 1,970. 2,001. 2,033.471/2� 231/2� 26� - 291/2� IE C48SK A2 2,057. 2,088. 2,121.471/2� 291/2� 26� - 291/2� IE C48DK A2 2,129. 2,160. 2,191.

Order Code

Example: IE S36DK A2; 117, 117,117, T1

I Interaction TableE Equity 11/4� topS Straight36 WidthD 30� DeepK With keyboard cutoutA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring




Application Notes

C-leg tables with keyboard cutoutprovide easy adjustability ofkeyboard surface. C-leg tables maybe used interactively in panel-basedEquity planning.

Worksurfaces adjacent tocurvilinear corner tables must becantilevered or desk end panelsupported.

Handle under keyboard tray allowsuser to adjust keyboard surfacefrom1/2� below to 51/2� below table.Keyboard tray has variable tilt from-15° to +15°.

Adjustable table base may bemanually adjusted to allow topheight at any1/2� increment from 26�to 291/2�. Fixed height table topheight is 283/8�H. Glides permit 1/2�leveling.

Knoll Office Tables

126

C-leg tables, top crank adjustableEquity tops



metaledge

Straight crank adjustable table 30� 24� 271/4� - 431/4� IE S3024 K2 $1,585. $1,610. $1,637.30� 30� 271/4� - 431/4� IE S3030 K2 1,656. 1,681. 1,707.36� 24� 271/4� - 431/4� IE S3624 K2 1,631. 1,657. 1,682.36� 30� 271/4� - 431/4� IE S3630 K2 1,679. 1,705. 1,732.42� 24� 271/4� - 431/4� IE S4224 K2 1,644. 1,670. 1,697.42� 30� 271/4� - 431/4� IE S4230 K2 1,704. 1,731. 1,757.48� 24� 271/4� - 431/4� IE S4824 K2 1,679. 1,705. 1,732.48� 30� 271/4� - 431/4� IE S4830 K2 1,728. 1,756. 1,780.60� 24� 271/4� - 431/4� IE S6024 K2 1,728. 1,756. 1,780.60� 30� 271/4� - 431/4� IE S6030 K2 1,776. 1,801. 1,828.

Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� IE C4224 K2 1,921. 1,947. 1,972.48� 24� 271/4� - 431/4� IE C4824 K2 1,992. 2,018. 2,044.48� 30� 271/4� - 431/4� IE C4830 K2 2,047. 2,073. 2,099.

Straight split-top crank adjustable table 42� 30� 271/4� - 431/4� IE S42DS K2 2,599. 2,625. 2,652.48� 30� 271/4� - 431/4� IE S48DS K2 2,649. 2,675. 2,701.

Curv. corner split-top crank adj. table 48� 24� 271/4� - 431/4� IE C48SS K2 2,911. 2,938. 2,963.48� 30� 271/4� - 431/4� IE C48DS K2 2,969. 2,994. 3,019.

Order Code

Example: IE C4830 K2; 117, 117,117

I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthK Top crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish



Specify color fields:Top finishTop edge finishBase finish

Application Notes


The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip issoft textured rubber over steel.

Equity rectangular table widths are31/2� less than nominal (11/2� less forcenterline planning rule and 1� lesson either side for safety) whiledepths are 1� less than nominal forsafety. Corner table widths are 2�less than nominal. Glides permit 1/2�leveling.


Knoll Office Tables

127

Equ

ityS

yste

mTo

pTa

bles

C-leg tables, electric adjustableEquity tops



metaledge

Straight electric adjustable table 30� 24� 271/4� - 431/4� IE S3024 E2 $2,328. $2,354. $2,380.30� 30� 271/4� - 431/4� IE S3030 E2 2,376. 2,402. 2,427.36� 24� 271/4� - 431/4� IE S3624 E2 2,351. 2,377. 2,404.36� 30� 271/4� - 431/4� IE S3630 E2 2,401. 2,426. 2,452.42� 24� 271/4� - 431/4� IE S4224 E2 2,376. 2,402. 2,427.42� 30� 271/4� - 431/4� IE S4230 E2 2,424. 2,450. 2,477.48� 24� 271/4� - 431/4� IE S4824 E2 2,401. 2,426. 2,452.48� 30� 271/4� - 431/4� IE S4830 E2 2,449. 2,476. 2,502.60� 24� 271/4� - 431/4� IE S6024 E2 2,449. 2,476. 2,502.60� 30� 271/4� - 431/4� IE S6030 E2 2,497. 2,522. 2,546.

Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� IE C3624 E2 2,529. 2,577. 2,628.42� 24� 271/4� - 431/4� IE C4224 E2 2,586. 2,650. 2,713.48� 24� 271/4� - 431/4� IE C4824 E2 2,656. 2,732. 2,808.48� 30� 271/4� - 431/4� IE C4830 E2 2,701. 2,784. 2,868.

Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IE C48SS E2 3,574. 3,650. 3,726.48� 30� 271/4� - 431/4� IE C48DS E2 3,619. 3,702. 3,787.

Example: IE C4830 E2; 117, 117,117

I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthE Electric adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish




Application Notes


The electric adjustment mechanismeasily lifts up to 200 pounds.Mechansim adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation..

Equity rectangular table widths are31/2� less than normal (11/2� less forcenterline planning rule and 1� lesson either side for safety) whiledepths are 1� less than nominal forsafety. Corner table widths are 2�less than nominal. Glides permit 1/2�leveling.


Knoll Office Tables

128

Four-star base, fixed and adjustable heightReff topsround


Pveneer

V1veneer

V2

Round table Fixed height 30� 29� IS R3000 X( ) $982. $1,224. $1,472.36� 29� IS R3600 X( ) 1,008. 1,256. 1,514.42� 29� IS R4200 X( ) 1,070. 1,331. 1,604.48� 29� IS R4800 X( ) 1,292. 1,610. 1,938.

Fixed height with casters 30� 29� IS R3000 W( ) 1,011. 1,260. 1,517.36� 29� IS R3600 W( ) 1,037. 1,294. 1,556.42� 29� IS R4200 W( ) 1,099. 1,369. 1,647.

Adjustable 30� 251/4� - 301/4� IS R3000 Y( ) 1,324. 1,649. 1,985.36� 251/4� - 301/4� IS R3600 Y( ) 1,394. 1,735. 2,087.42� 251/4� - 301/4� IS R4200 Y( ) 1,483. 1,846. 2,221.48� 251/4� - 301/4� IS R4800 Y( ) 1,873. 2,334. 2,808.

Order Code

Example: IS R3600 XP; 117, 117,T1

I Interaction TableS Reff System topR Round36 DiameterX Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish



Specify top types:P Type P laminatesV Veneer


Application Notes





Knoll Office Tables

129

Ref

fS

yste

mTo

pTa

bles

C-leg tables, fixed heightReff tops


Pveneer

V1veneer

V2

Rectangular fixed height table 30� 24� 281/4� IS S3024 B( ) $816. $1,017. $1,222.30� 30� 281/4� IS S3030 B( ) 880. 1,100. 1,320.36� 24� 281/4� IS S3624 B( ) 846. 1,057. 1,268.36� 30� 281/4� IS S3630 B( ) 912. 1,142. 1,368.42� 24� 281/4� IS S4224 B( ) 880. 1,100. 1,320.42� 30� 281/4� IS S4230 B( ) 945. 1,180. 1,419.48� 24� 281/4� IS S4824 B( ) 912. 1,142. 1,368.48� 30� 281/4� IS S4830 B( ) 978. 1,222. 1,465.60� 24� 281/4� IS S6024 B( ) 978. 1,222. 1,465.60� 30� 281/4� IS S6030 B( ) 1,039. 1,302. 1,563.

Curvilinear corner fixed height table 42� 24� 281/4� IS C4224 B( ) 1,240. 1,549. 1,858.48� 24� 281/4� IS C4824 B( ) 1,332. 1,665. 1,999.48� 30� 281/4� IS C4830 B( ) 1,409. 1,763. 2,114.

Order Code

Example: IS S4824 BP; 117, 117,T1

I Interaction TableS Reff System topS Straight48 Width24 DepthB Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish



Specify top type:P Plastic laminateV Veneer


Application Notes


Fixed height C-leg tables may beused interactively in panel-based orfreestanding Reff Systems planning,with 15/32� tops.


Rectangular tables accommodate18�D suspended, floorstanding ormobile System 6 pedestals; 30�Dtables accommodate 24�Dpedestals.

Knoll Office Tables

130

C-leg tables, manually adjustableReff tops


Pveneer

V1veneer

V2

Rectangular manually adjustable table 30� 24� 26�- 291/2� IS S3024 A( ) $1,098. $1,299. $1,504.30� 30� 26�- 291/2� IS S3030 A( ) 1,162. 1,382. 1,603.36� 24� 26�- 291/2� IS S3624 A( ) 1,128. 1,341. 1,551.36� 30� 26�- 291/2� IS S3630 A( ) 1,193. 1,425. 1,649.42� 24� 26�- 291/2� IS S4224 A( ) 1,162. 1,382. 1,603.42� 30� 26�- 291/2� IS S4230 A( ) 1,226. 1,462. 1,699.48� 24� 26�- 291/2� IS S4824 A( ) 1,193. 1,425. 1,649.48� 30� 26�- 291/2� IS S4830 A( ) 1,259. 1,504. 1,748.60� 24� 26�- 291/2� IS S6024 A( ) 1,254. 1,504. 1,748.60� 30� 26�- 291/2� IS S6030 A( ) 1,324. 1,584. 1,845.

Curvilinear corner manually adjustable table 42� 24� 26�- 291/2� IS C4224 A( ) 1,520. 1,830. 2,138.48� 24� 26�- 291/2� IS C4824 A( ) 1,614. 1,947. 2,281.48� 30� 26�- 291/2� IS C4830 A( ) 1,692. 2,045. 2,397.

Order Code

Example: IS S4830 AW; Y311,117, T1

I Interaction TableS Reff System topS Rectangular48 Width30 DepthA Base typeW Top typeY311 Top finish117 Base finishT1 Trim ring finish



Top types:P Plastic laminateV Veneer


Application Notes

Manually adjustable tables provideportable, adjustable surfaces inopen plan workstations or privateoffices. Manually adjustable C-legtables may be used interactively inpanel-based or freestanding ReffSystems planning, with 15/32� tops.



Knoll Office Tables

131

Ref

fS

yste

mTo

pTa

bles

C-leg tables, crank adjustableReff tops


Pveneer

V1veneer

V2

Rectangular crank adjustable table 30� 24� 23�- 35� IS S3024 D(L/R)( ) $2,047. $2,248. $2,453.30� 30� 23�- 35� IS S3030 D(L/R)( ) 2,110. 2,279. 2,316.36� 24� 23�- 35� IS S3624 D(L/R)( ) 2,077. 2,213. 2,499.36� 30� 23�- 35� IS S3630 D(L/R)( ) 2,141. 2,372. 2,592.42� 24� 23�- 35� IS S4224 D(L/R)( ) 2,110. 2,333. 2,551.42� 30� 23�- 35� IS S4230 D(L/R)( ) 2,175. 2,411. 2,654.48� 24� 23�- 35� IS S4824 D(L/R)( ) 2,141. 2,372. 2,592.48� 30� 23�- 35� IS S4830 D(L/R)( ) 2,210. 2,453. 2,698.60� 24� 23�- 35� IS S6024 D(L/R)( ) 2,202. 2,453. 2,698.60� 30� 23�- 35� IS S6030 D(L/R)( ) 2,273. 2,533. 2,793.

Curvilinear corner crank adjustable table 42� 24� 23�- 35� IS C4224 D( ) 2,469. 2,779. 2,816.48� 24� 23�- 35� IS C4824 D( ) 2,564. 2,895. 2,958.48� 30� 23�- 35� IS C4830 D( ) 2,641. 2,992. 3,346.

Order Code

Example: IS S4830 DLW; Y311,117, T1

I Interaction TableS Reff System topS Rectangular48 Width30 DepthD Base typeL Left handle locationW Top typeY311 Top finish117 Base finishT1 Trim ring finish




Top types:P Plastic laminateV Veneer


Application Notes


Tables may be used interactively inpanel-based or freestanding ReffSystems planning, with 15/32� tops.

Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right on rectangulartables.

Actual rectangular table widths are1� less than nominal. Actual cornertable widths are1/2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

132

C-leg tables, Counterforce™ adjustableReff tops


Pveneer

V1veneer

V2

Rectangular Counterforce table 29� 231/2� 26� - 41� IS S3024 C( ) $2,929. $3,131. $3,336.29� 291/2� 26� - 41� IS S3030 C( ) 2,993. 3,216. 3,434.35� 231/2� 26� - 41� IS S3624 C( ) 2,959. 3,171. 3,383.35� 291/2� 26� - 41� IS S3630 C( ) 3,028. 3,255. 3,482.41� 231/2� 26� - 41� IS S4224 C( ) 2,993. 3,216. 3,434.41� 291/2� 26� - 41� IS S4230 C( ) 3,060. 3,295. 3,533.47� 231/2� 26� - 41� IS S4824 C( ) 3,028. 3,255. 3,482.47� 291/2� 26� - 41� IS S4830 C( ) 3,092. 3,336. 3,580.59� 231/2� 26� - 41� IS S6024 C( ) 3,092. 3,336. 3,580.59� 291/2� 26� - 41� IS S6030 C( ) 3,157. 3,417. 3,680.

Order Code

Example: IS S4824 CP; 117, 117,T4

I Interaction TableS Reff System topS Straight48 Width24 Depth of returnC Base typeP Top type117 Top finish117 Base finishT4 Trim ring finish





Application Notes

Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-based orfreestanding Reff Systems planning,with 15/32� tops.

Fingertip control allows user toadjust from seated- to standing-work height (26�-41�) without toolsor effort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.


Knoll Office Tables

133

Ref

fS

yste

mTo

pTa

bles

T-leg tablesReff tops


Pveneer

V1veneer

V2

Straight table 48� 295/8� 281/4� IS S4830 T( ) $978. $1,222. $1,465.48� 355/8� 281/4� IS S4836 T( ) 1,043. 1,302. 1,563.60� 295/8� 281/4� IS S6030 T( ) 1,043. 1,302. 1,563.60� 355/8� 281/4� IS S6036 T( ) 1,125. 1,400. 1,757.72� 295/8� 281/4� IS S7230 T( ) 1,125. 1,400. 1,757.72� 355/8� 281/4� IS S7236 T( ) 1,181. 1,468. 1,845.

Rounded end table 63� 30� 281/4� IS U6330 T( ) 1,368. 1,709. 2,052.66� 36� 281/4� IS U6636 T( ) 1,465. 1,831. 2,200.75� 30� 281/4� IS U7530 T( ) 1,465. 1,831. 2,200.78� 36� 281/4� IS U7836 T( ) 1,563. 1,955. 2,344.

Order Code

Example: IS U6330TW; Y311,117, T2

I Interaction TableS Reff System topU Rounded end63 Width30 DepthT Base typeW Top typeY311 Top finish117 Base finishT2 Trim ring finish





Application Notes

T-leg tables provide shared meetingand work surfaces in conjunctionwith Reff Systems planning.

T-leg base tables are fixed at281/4�H. Tables may be increased inheight in1/2� increments byspecifying extender glides (seeAccessories, p. 159).

Knoll Office Tables

134

C-leg tables, split topReff tops


Pveneer

V1veneer

V2

Split-top straight table Fixed height 35� 30� 281/4� IS S36DS B( ) $2,039. $2,270. $2,495.41� 30� 281/4� IS S42DS B( ) 2,074. 2,308. 2,546.47� 30� 281/4� IS S48DS B( ) 2,105. 2,349. 2,595.

Manually adjustable 35� 30� 26� - 291/2� IS S36DS A( ) 2,321. 2,551. 2,778.41� 30� 26� - 291/2� IS S42DS A( ) 2,352. 2,591. 2,828.47� 30� 26� - 291/2� IS S48DS A( ) 2,386. 2,633. 2,876.

Crank adjustable 35� 30� 23�- 35� IS S36DS D( ) 3,271. 3,500. 3,727.41� 30� 23�- 35� IS S42DS D( ) 3,302. 3,538. 3,775.47� 30� 23�- 35� IS S48DS D( ) 3,335. 3,580. 3,825.

Split-top corner table Fixed height 47� 24� 281/4� IS C48SS B( ) 2,462. 2,790. 3,127.47� 30� 281/4� IS C48DS B( ) 2,537. 2,890. 3,244.

Manually adjustable 47� 24� 26� - 291/2� IS C48SS A( ) 2,742. 3,074. 3,409.47� 30� 26� - 291/2� IS C48DS A( ) 2,818. 3,171. 3,522.

Crank adjustable 47� 24� 23�- 35� IS C48SS D( ) 3,690. 3,952. 4,021.47� 30� 23�- 35� IS C48DS D( ) 3,768. 4,120. 4,472.

Order Code

Example: IS S36DS AP; 117, 117,T1

I Interaction TableS Reff System topS Straight36 WidthD DepthS Split-topA Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish



Base types:A AdjustableB Fixed heightD Crank



Application Notes

Split-top C-leg tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based or freestanding ReffSystems planning, with 11/4� tops.



Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located at frontcenter of rear surface.


Knoll Office Tables

135

Ref

fS

yste

mTo

pTa

bles

C-leg tables, keyboard cutoutReff tops


Pveneer

V1veneer

V2

Straight table with keyboard cutout Fixed height 36� 30� 281/4� IS S36DK B( ) $1,479. $1,705. $1,930.42� 30� 281/4� IS S42DK B( ) 1,511. 1,743. 1,981.48� 30� 281/4� IS S48DK B( ) 1,541. 1,787. 2,030.

Manually adjustable 36� 30� 26� - 291/2� IS S36DK A( ) 1,759. 1,988. 2,214.42� 30� 26� - 291/2� IS S42DK A( ) 1,791. 2,027. 2,263.48� 30� 26� - 291/2� IS S48DK A( ) 1,823. 2,070. 2,311.

Corner table with keyboard cutout Fixed height 42� 24� 281/4� IS C42SK B( ) 1,802. 2,111. 2,422.48� 24� 281/4� IS C48SK B( ) 1,896. 2,227. 2,564.48� 30� 281/4� IS C48DK B( ) 1,972. 2,329. 2,679.

Manually adjustable 42� 24� 26� - 291/2� IS C42SK A( ) 2,085. 2,395. 2,702.48� 24� 26� - 291/2� IS C48SK A( ) 2,178. 2,511. 2,844.48� 30� 26� - 291/2� IS C48DK A( ) 2,255. 2,607. 2,959.

Order Code

Example: IS S36DK AP; 117, 117,T1

I Interaction TableS Reff System topS Straight36 WidthD DepthK Keyboard cutoutA Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish





Application Notes

C-leg tables with keyboard cutoutprovide easy adjustability ofkeyboard surface. C-leg tables maybe used interactively in panel-basedor freestanding Reff Systemsplanning.


Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 281/4�H.Glides permit 1/2� leveling. Glideextenders raise top height in1/2�increments. (See Accessories, p.159).

Knoll Office Tables

136

C-leg tables, top crank adjustableReff tops


Pveneer

V1veneer

V2

Rectangular crank adjustable table 30� 24� 271/4� - 431/4� IS S3024 K( ) $1,669. $1,832. $2,001.30� 30� 271/4� - 431/4� IS S3030 K( ) 1,722. 1,857. 1,889.36� 24� 271/4� - 431/4� IS S3624 K( ) 1,695. 1,802. 2,038.36� 30� 271/4� - 431/4� IS S3630 K( ) 1,747. 1,934. 2,113.42� 24� 271/4� - 431/4� IS S4224 K( ) 1,722. 1,902. 2,081.42� 30� 271/4� - 431/4� IS S4230 K( ) 1,773. 1,967. 2,165.48� 24� 271/4� - 431/4� IS S4824 K( ) 1,747. 1,934. 2,113.48� 30� 271/4� - 431/4� IS S4830 K( ) 1,800. 2,001. 2,200.60� 24� 271/4� - 431/4� IS S6024 K( ) 1,796. 2,001. 2,200.60� 30� 271/4� - 431/4� IS S6030 K( ) 1,853. 2,065. 2,277.

Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� IS C4224 K( ) 2,013. 2,266. 2,296.48� 24� 271/4� - 431/4� IS C4824 K( ) 2,089. 2,361. 2,413.48� 30� 271/4� - 431/4� IS C4830 K( ) 2,153. 2,441. 2,729.

Rect. split-top crank adjustable table 35� 30� 271/4� - 431/4� IS S36DS K( ) 2,667. 2,855. 3,038.41� 30� 271/4� - 431/4� IS S42DS K( ) 2,693. 2,885. 3,077.47� 30� 271/4� - 431/4� IS S48DS K( ) 2,720. 2,919. 3,119.

Curv. corner split-top crank adj. table 47� 24� 271/4� - 431/4� IS C48SS K( ) 3,010. 3,222. 3,279.47� 30� 271/4� - 431/4� IS C48DS K( ) 3,073. 3,360. 3,647.

Order Code

Example: IS S4830 K;P, 117, 117

I Interaction TableS Reff 11/4� topS Rectangular48 Width30 DepthK Base typeP Top type117 Top finish117 Base finish






Application Notes


The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27� to 43� heightrange. The handle grip is softtextured rubber over steel.

Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal for safety. Cornertable widths are 2� less thannominal. Glides permit 1/2� leveling.

Knoll Office Tables

137

Ref

fS

yste

mTo

pTa

bles

C-leg tables, electric adjustableReff tops


Pveneer

V1veneer

V2

Rectangular electric adjustable table 30� 24� 271/4� - 431/4� IS S3024 E( ) $2,388. $2,553. $2,721.30� 30� 271/4� - 431/4� IS S3030 E( ) 2,440. 2,622. 2,801.36� 24� 271/4� - 431/4� IS S3624 E( ) 2,413. 2,586. 2,759.36� 30� 271/4� - 431/4� IS S3630 E( ) 2,468. 2,655. 2,840.42� 24� 271/4� - 431/4� IS S4224 E( ) 2,442. 2,622. 2,801.42� 30� 271/4� - 431/4� IS S4230 E( ) 2,494. 2,686. 2,881.48� 24� 271/4� - 431/4� IS S4824 E( ) 2,468. 2,655. 2,840.48� 30� 271/4� - 431/4� IS S4830 E( ) 2,521. 2,721. 2,919.60� 24� 271/4� - 431/4� IS S6024 E( ) 2,521. 2,721. 2,919.60� 30� 271/4� - 431/4� IS S6030 E ( ) 2,574. 2,786. 3,000.

Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� IS C3624 E( ) 2,529. 2,896. 3,172.42� 24� 271/4� - 431/4� IS C4224 E( ) 2,586. 2,967. 3,243.48� 24� 271/4� - 431/4� IS C4824 E( ) 2,656. 3,051. 3,344.48� 30� 271/4� - 431/4� IS C4830 E( ) 2,701. 3,102. 3,403.

Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IS C48SS E( ) 3,574. 3,972. 4,262.48� 30� 271/4� - 431/4� IS C48DS E( ) 3,619. 4,025. 4,322.

Order Code

Example: IS S4830 EP; 117, 117

I Interaction TableS Reff 11/4� topS Rectangular48 Width30 DepthE Base typeP Top type117 Top finish117 Base finish





Application Notes



Rectangular table widths are 2� lessthan actual while depths are 1� lessthan actual for safety. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.


Knoll Office Tables

138

Four-star base, fixed and adjustable heightDividends Horizon top 2mm edgeround

description type w d h pattern no.laminate w/

PVC edgelaminate w/

woodgrain edgelaminate w/metal edge

Round table2mm edge

Fixed height 30� 29� ID R3000 X2 $890. $922. $954.36� 29� ID R3600 X2 915. 959. 978.42� 29� ID R4200 X2 969. 1,002. 1,033.48� 29� ID R4800 X2 1,172. 1,204. 1,236.

Fixed height with casters 30� 29� ID R3000 W2 917. 948. 981.36� 29� ID R3600 W2 941. 973. 1,005.42� 29� ID R4200 W2 995. 1,028. 1,059.

Adjustable 30� 251/4� - 301/4� ID R3000 Y2 1,200. 1,233. 1,265.36� 251/4� - 301/4� ID R3600 Y2 1,264. 1,295. 1,326.42� 251/4� - 301/4� ID R4200 Y2 1,344. 1,375. 1,406.48� 251/4� - 301/4� ID R4800 Y2 1,698. 1,731. 1,762.

Order Code

Example: ID R3600 X2; 117, 117,117, T4

I Interaction TableD Dividends topR Round36 DiameterX Base type2 2 mm top edge117 Top finish117 Edge finish117 Base finishT4 Trim ring finish




Application Notes






Knoll Office Tables

139

Div

iden

dsH

oriz

onS

yste

mTo

pTa

bles

C-leg tables, fixed heightDividends Horizon tops

description w d h pattern no.laminate w/

PVC edgelaminate w/


Straight fixed height table 2913/16� 231/2� 283/8� ID S3024 B2 $738. $770. $803.2913/16� 291/2� 283/8� ID S3030 B2 799. 831. 862.3513/16� 231/2� 283/8� ID S3624 B2 769. 801. 833.3513/16� 291/2� 283/8� ID S3630 B2 828. 860. 891.4113/16� 231/2� 283/8� ID S4224 B2 799. 831. 862.4113/16� 291/2� 283/8� ID S4230 B2 859. 890. 922.4713/16� 231/2� 283/8� ID S4824 B2 828. 860. 891.4713/16� 291/2� 283/8� ID S4830 B2 888. 919. 952.5913/16� 231/2� 283/8� ID S6024 B2 888. 919. 952.5913/16� 291/2� 283/8� ID S6030 B2 947. 979. 1,011.7113/16� 231/2� 283/8� ID S7224 B2 947. 979. 1,011.7113/16� 291/2� 283/8� ID S7230 B2 1,007. 1,039. 1,071.

Curvilinear corner fixed height table 42� 231/2� 283/8� ID C4224 B2 1,125. 1,158. 1,189.48� 231/2� 283/8� ID C4824 B2 1,212. 1,244. 1,275.48� 291/2� 283/8� ID C4830 B2 1,283. 1,316. 1,347.

Order Code

Example: ID S3624 B2; 117, 117,117, T4

I Interaction TableD Dividends 11/4� topS Straight36 Width24 DepthB2 Fixed Height, 2mm top





Application Notes

Fixed height tables provideportability in open planworkstations or private offices.

Fixed height C-leg tables may beused interactively in panel-basedDividends planning, with tops tomatch Dividends worksurfaces.



Specify extender glides (see p. 159)for alignment with Dividendspanel-mounted worksurfaces.

Rectangular tables accommodate18�D suspended floorstanding ormobile Dividends pedestals; 30�Dtables accommodate 24�Dpedestals. Specify extender glidesfor tables with floorstandingpedestals.

Knoll Office Tables

140

C-leg tables, manually adjustableDividends Horizon tops


PVC edgelaminate w/


Straight manually adjustable table 2913/16� 231/2� 26�- 291/2� ID S3024 A2 $1,022. $1,054. $1,086.2913/16� 291/2� 26�- 291/2� ID S3030 A2 1,082. 1,114. 1,145.3513/16� 231/2� 26�- 291/2� ID S3624 A2 1,051. 1,084. 1,115.3513/16� 291/2� 26�- 291/2� ID S3630 A2 1,113. 1,144. 1,175.4113/16� 231/2� 26�- 291/2� ID S4224 A2 1,082. 1,114. 1,145.4113/16� 291/2� 26�- 291/2� ID S4230 A2 1,142. 1,173. 1,205.4713/16� 231/2� 26�- 291/2� ID S4824 A2 1,113. 1,144. 1,175.4713/16� 291/2� 26�- 291/2� ID S4830 A2 1,172. 1,204. 1,236.5913/16� 231/2� 26�- 291/2� ID S6024 A2 1,172. 1,204. 1,236.5913/16� 291/2� 26�- 291/2� ID S6030 A2 1,228. 1,260. 1,292.7113/16� 231/2� 26�- 291/2� ID S7224 A2 1,228. 1,260. 1,292.7113/16� 291/2� 26�- 291/2� ID S7230 A2 1,290. 1,321. 1,352.

Curvilinear corner manually adjustable table 4113/16� 231/2� 26�- 291/2� ID C4224 A2 1,406. 1,437. 1,468.4713/16� 231/2� 26�- 291/2� ID C4824 A2 1,492. 1,524. 1,556.4713/16� 291/2� 26�- 291/2� ID C4830 A2 1,563. 1,595. 1,627.

Order Code

Example: ID C4830 A2; 117, 117,117, T2

I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthA2 Adjustable, 2mm top





Application Notes

Manually adjustable height tablesprovide portable, adjustablesurfaces in open plan workstationsor private offices.

Manually adjustable height C legtables may be used interactively inpanel-based Dividends planning,with laminate tops to match 11/4�worksurfaces with 2mm edge.



Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. (See Accessories,p. 159)

Knoll Office Tables

141

Div

iden

dsH

oriz

onS

yste

mTo

pTa

bles

C-leg tables, crank adjustableDividends Horizon tops


PVC edgelamiante w/


Straight crank adjustable table 2913/16� 231/2� 231/4�- 35� ID S3024 D(R/L)2 $1,943. $1,975. $2,006.2913/16� 291/2� 231/4�- 35� ID S3030 D(R/L)2 2,030. 2,062. 2,094.3513/16� 231/2� 231/4�- 35� ID S3624 D(R/L)2 2,000. 2,031. 2,063.3513/16� 291/2� 231/4�- 35� ID S3630 D(R/L)2 2,059. 2,091. 2,125.4113/16� 231/2� 231/4�- 35� ID S4224 D(R/L)2 2,018. 2,049. 2,080.4113/16� 291/2� 231/4�- 35� ID S4230 D(R/L)2 2,089. 2,122. 2,155.4713/16� 231/2� 231/4�- 35� ID S4824 D(R/L)2 2,059. 2,091. 2,125.4713/16� 291/2� 231/4�- 35� ID S4830 D(R/L)2 2,121. 2,154. 2,185.5913/16� 231/2� 231/4�- 35� ID S6024 D(R/L)2 2,121. 2,154. 2,185.5913/16� 291/2� 231/4�- 35� ID S6030 D(R/L)2 2,178. 2,211. 2,242.

Curvilinear corner crank adjustable table 4113/16� 231/2� 231/4�- 35� ID C4224 D2 2,356. 2,387. 2,419.4713/16� 231/2� 231/4�- 35� ID C4824 D2 2,441. 2,473. 2,505.4713/16� 291/2� 231/4�- 35� ID C4830 D2 2,511. 2,542. 2,574.

Order Code

Example: ID C4830 D2; 117, 117,117, T2

I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthD Crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finishT2 Trim ring


Pattern number logic:

1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location

Handle location (rectangular only):

R Right handL Left hand


Application Notes


Crank adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.

Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.

Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

142

C-leg tables, Counterforce™ adjustableDividends Horizon tops


PVC edgelaminate w/


Straight counterforce table 2913/16� 23� 26� - 41� ID S3024 C2 $2,856. $2,887. $2,918.2913/16� 29� 26� - 41� ID S3030 C2 2,915. 2,946. 2,978.3513/16� 23� 26� - 41� ID S3624 C2 2,885. 2,916. 2,947.3513/16� 29� 26� - 41� ID S3630 C2 2,945. 2,976. 3,008.4113/16� 23� 26� - 41� ID S4224 C2 2,915. 2,946. 2,978.4113/16� 29� 26� - 41� ID S4230 C2 2,974. 3,006. 3,037.4713/16� 23� 26� - 41� ID S4824 C2 2,945. 2,976. 3,008.4713/16� 29� 26� - 41� ID S4830 C2 3,005. 3,036. 3,067.5913/16� 23� 26� - 41� ID S6024 C2 3,005. 3,036. 3,067.5913/16� 29� 26� - 41� ID S6030 C2 3,062. 3,093. 3,125.

Order Code

Example: ID S4830 C2; 117, 117,117, T4

I Interaction TableD Dividends 11/4� topS Top shape48 Width30 DepthC2 Base type, 2mm top edge117 Top finish117 Edge finish117 Base finishT4 Trim ring




Application Notes

Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.

Fingertip control allows user toadjust from seated to standing-workheight (26� - 41�) without tools oreffort. Counterforce tables may beadjusted by the user tocounterbalance loads of 0-90 lbs.

Worksurfaces adjacent tocurvilinear corner tables must becantilevered not desk endpanel-supported.


Note:24�D Counterforce tables provideonly 16� clear kneespace inside the121/4� cross-beam, 12� above thefloor. ANSI/BIFMA recommendsminimum 19�D kneespace,increasing to 23�D at toe height.


Knoll Office Tables

143

Div

iden

dsH

oriz

onS

yste

mTo

pTa

bles

T-leg tablesDividends Horizon tops


PVC edgelaminate w/


Straight table 4713/16� 291/2� 283/8� ID S4830 T2 $888. $919. $952.4713/16� 351/2� 283/8� ID S4836 T2 947. 979. 1,011.5913/16� 291/2� 283/8� ID S6030 T2 947. 979. 1,011.5913/16� 351/2� 283/8� ID S6036 T2 1,022. 1,054. 1,086.7113/16� 291/2� 283/8� ID S7230 T2 1,022. 1,054. 1,086.7113/16� 351/2� 283/8� ID S7236 T2 1,073. 1,106. 1,138.

Rounded end table 63� 30� 283/8� ID U6330 T2 1,245. 1,276. 1,308.66� 36� 283/8� ID U6636 T2 1,332. 1,364. 1,397.75� 30� 283/8� ID U7530 T2 1,332. 1,364. 1,397.78� 36� 283/8� ID U7836 T2 1,424. 1,455. 1,486.

Order Code

Example: ID U7530 T2; 117, 117,117, T1

I Interaction TableD Dividends topU Rounded end75 Width30 DepthT2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish




Application Notes

T-leg tables provide shared meetingor worksurfaces in conjunction withDividends or other Interactiontables. Laminate tops match 11/4�worksurfaces in 2mm edge.

T-leg base tables are fixed at283/8�H. Stacking glide extendersmay be specified to increase tableheight in1/2� increments. (SeeAccessories, p. 159)

Knoll Office Tables

144

C-leg tables, split-topDividends Horizon tops


PVC edgelaminate w/


Split-top straight table Crank adjustable 3413/16� 291/2� 231/2�- 35� ID S36DS D2 $3,188. $3,219. $3,251.Crank adjustable 4613/16� 291/2� 231/2�- 35� ID S48DS D2 3,249. 3,280. 3,311.Fixed height 3413/16� 291/2� 283/8� ID S36DS B2 1,957. 1,990. 2,021.Fixed height 4613/16� 291/2� 283/8� ID S48DS B2 2,018. 2,049. 2,080.Manually adjustable 3413/16� 291/2� 26� - 291/2� ID S36DS A2 2,241. 2,272. 2,304.Manually adjustable 4613/16� 291/2� 26� - 291/2� ID S48DS A2 2,300. 2,332. 2,363.

Split-top curvilinear corner table Fixed height 47� 231/2� 283/8� ID C48SS B2 2,340. 2,371. 2,402.47� 291/2� 283/8� ID C48DS B2 2,409. 2,440. 2,472.

Manually adjustable 47� 231/2� 26� - 291/2� ID C48SS A2 2,621. 2,652. 2,683.47� 291/2� 26� - 291/2� ID C48DS A2 2,692. 2,724. 2,755.

Crank adjustable 47� 231/2� 231/2�- 35� ID C48SS D2 3,569. 3,600. 3,632.47� 291/2� 231/2�- 35� ID C48DS D2 3,640. 3,673. 3,704.

Order Code

Example: ID S36DS A2; 117, 117,117, T1

I Interaction TableD Dividends 11/4� topS Straight36 WidthD DepthS Split topA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish



Color fields:Top finishTop edge finishBase finishTrim ring finish

Application Notes

Split-top tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based Dividends planning,with tops to match 11/4�worksurfaces.



Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located in frontcenter of rear worksurface.


Knoll Office Tables

145

Div

iden

dsH

oriz

onS

yste

mTo

pTa

bles

C-leg tables, keyboard cutoutDividends Horizon tops


PVC edgelaminate w/


Straight table with keyboard cutout Fixed height 3513/16� 291/2� 283/8� ID S36DK B2 $1,395. $1,426. $1,457.Fixed height 4713/16� 291/2� 283/8� ID S48DK B2 1,454. 1,485. 1,516.Manually adjustable 3513/16� 291/2� 26� - 291/2� ID S36DK A2 1,675. 1,707. 1,738.Manually adjustable 4713/16� 291/2� 26� - 291/2� ID S48DK A2 1,735. 1,766. 1,797.

Curvilinear corner table with keyboard cutout Fixed height 411/2� 231/2� 283/8� ID C42SK B2 1,689. 1,721. 1,752.471/2� 231/2� 283/8� ID C48SK B2 1,775. 1,806. 1,838.471/2� 291/2� 283/8� ID C48DK B2 1,845. 1,876. 1,908.

Manually adjustable 411/2� 231/2� 26� - 291/2� ID C42SK A2 1,970. 2,001. 2,033.471/2� 231/2� 26� - 291/2� ID C48SK A2 2,057. 2,088. 2,121.471/2� 291/2� 26� - 291/2� ID C48DK A2 2,129. 2,160. 2,191.

Order Code

Example: ID S36DK A2; 117, 117,117, T5

I Interaction TableD Dividends 11/4� topS Straight36 WidthD 30� DeepK With keyboard cutoutA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT5 Trim ring finish




Application Notes

C-leg tables with keyboard cutoutprovide easy adjustability ofkeyboard surface. C-leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith E2 or Radius edge.

Worksurfaces adjacent tocurvilinear corner tables must becantilevered or desk end panelsupported.


Adjustable table base may bemanually adjusted to allow topheight at any1/2� increment from 26�to 291/2�. Fixed height table topheight is 283/8�H. Glides permit 1/2�leveling.

Knoll Office Tables

146

C-leg tables, top crank adjustableDividends Horizon tops


PVC edgelaminate w/

woodgrain edgelamiante w/metal edge

Straight crank adjustable table 30� 24� 271/4� - 431/4� ID S3024 K2 $1,585. $1,610. $1,637.30� 30� 271/4� - 431/4� ID S3030 K2 1,656. 1,681. 1,707.36� 24� 271/4� - 431/4� ID S3624 K2 1,631. 1,657. 1,682.36� 30� 271/4� - 431/4� ID S3630 K2 1,679. 1,705. 1,732.42� 24� 271/4� - 431/4� ID S4224 K2 1,644. 1,670. 1,697.42� 30� 271/4� - 431/4� ID S4230 K2 1,704. 1,731. 1,757.48� 24� 271/4� - 431/4� ID S4824 K2 1,679. 1,705. 1,732.48� 30� 271/4� - 431/4� ID S4830 K2 1,728. 1,756. 1,780.60� 24� 271/4� - 431/4� ID S6024 K2 1,728. 1,756. 1,780.60� 30� 271/4� - 431/4� ID S6030 K2 1,776. 1,801. 1,828.

Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� ID C4224 K2 1,921. 1,947. 1,972.48� 24� 271/4� - 431/4� ID C4824 K2 1,992. 2,018. 2,044.48� 30� 271/4� - 431/4� ID C4830 K2 2,047. 2,073. 2,099.

Straight split top crank adjustable table 42� 30� 271/4� - 431/4� ID S42DS K2 2,599. 2,625. 2,652.48� 30� 271/4� - 431/4� ID S48DS K2 2,649. 2,675. 2,701.

Curv. corner split-top crank adjustable table 48� 24� 271/4� - 431/4� ID C48SS K2 2,911. 2,938. 2,963.48� 30� 271/4� - 431/4� ID C48DS K2 2,969. 2,994. 3,019.

Order Code

Example: ID C4830 K2; 117, 117,117

I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthK Top crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish




Application Notes


Crank adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.

The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip issoft textured rubber over steel.

Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal for safety. Cornertable widths are 2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

147

Div

iden

dsH

oriz

onS

yste

mTo

pTa

bles

C-leg tables, electric adjustableDividends Horizon tops


PVC edgelaminate w/


Straight electric adjustable table 30� 24� 271/4� - 431/4� ID S3024 E2 $2,328. $2,354. $2,380.30� 30� 271/4� - 431/4� ID S3030 E2 2,376. 2,402. 2,427.36� 24� 271/4� - 431/4� ID S3624 E2 2,351. 2,377. 2,404.36� 30� 271/4� - 431/4� ID S3630 E2 2,401. 2,426. 2,452.42� 24� 271/4� - 431/4� ID S4224 E2 2,376. 2,402. 2,427.42� 30� 271/4� - 431/4� ID S4230 E2 2,424. 2,450. 2,477.48� 24� 271/4� - 431/4� ID S4824 E2 2,401. 2,426. 2,452.48� 30� 271/4� - 431/4� ID S4830 E2 2,449. 2,476. 2,502.60� 24� 271/4� - 431/4� ID S6024 E2 2,449. 2,476. 2,502.60� 302� 271/4� - 431/4� ID S6030 E2 2,497. 2,522. 2,546.

Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� ID C3624 E2 2,529. 2,577. 2,628.42� 24� 271/4� - 431/4� ID C4224 E2 2,586. 2,650. 2,713.48� 24� 271/4� - 431/4� ID C4824 E2 2,656. 2,732. 2,808.48� 30� 271/4� - 431/4� ID C4830 E2 2,701. 2,784. 2,868.

Curv. corner split-top electric adjustable table 48� 24� 271/4� - 431/4� ID C48SS E2 3,574. 3,650. 3,726.48� 30� 271/4� - 431/4� ID C48DS E2 3,619. 3,702. 3,787.

Order Code

Example: ID C4830 E2; 117, 117,117

I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthE Electric adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish




Application Notes


Electric adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.


Rectangular table widths are 2� lessthan actual while depths are 1� lessthan actual for safety. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.


Knoll Office Tables

148

Four-star base, fixed and adjustable heightCascade edge topsround

description type w h pattern no. Solid Woodgrain

Round table Fixed height 30� 29� ICER3000X $917. $969.36� 29� ICER3600X 941. 993.42� 29� ICER4200X 999. 1,051.48� 29� ICER4800X 1,207. 1,259.

Fixed height with casters 30� 29� ICER3000W 945. 997.36� 29� ICER3600W 969. 1,021.42� 29� ICER4200W 1,025. 1,077.

Adjustable 30� 251/4� - 301/4� ICER3000Y 1,237. 1,289.36� 251/4� - 301/4� ICER3600Y 1,300. 1,352.42� 251/4� - 301/4� ICER4200Y 1,382. 1,434.48� 251/4� - 301/4� ICER4800Y 1,750. 1,802.

Order Code

Example: ICE R4200 X; 118, 113,T1

I Interaction TableCE Cascade edge topR Round4200 42� wX Base type118 Top finish113 Base finishT1 Trim ring finish



Available Top colors:

Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice

Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut


Top finishBase finishTrim ring finish

Bold line on image representsCascade Edge detail.

Application Notes





Knoll Office Tables

149

Cas

cade

Edg

eTo

pTa

bles

C-leg tables, fixed heightCascade edge tops

description w d h pattern no. Solid Woodgrain

Straight fixed height 30� 24 283/8� ICES3024B $761. $813.30� 30 283/8� ICES3030B 822. 874.36� 24 283/8� ICES3624B 792. 844.36� 30 283/8� ICES3630B 853. 905.42� 24� 283/8� ICES4224B 822. 874.42� 30� 283/8� ICES4230B 884. 936.48� 24� 283/8� ICES4824B 853. 905.48� 30� 283/8� ICES4830B 915. 967.60� 24� 283/8� ICES6024B 915. 967.60� 30� 283/8� ICES6030B 976. 1,028.72� 24� 283/8� ICES7224B 976. 1,028.72� 30� 283/8� ICES7230B 1,037. 1,089.

Curvilinear corner fixed height 42� 24� 283/8� ICEC4224B 1,160. 1,212.48� 24� 283/8� ICEC4824B 1,248. 1,300.48� 30� 283/8� ICEC4830B 1,322. 1,374.

Order Code

Example: ICE S4230 B; 118, 113,T1

I Interaction TableCE Cascade edge topS Straight42 Width30 DepthB Base type118 Top finish113 Base finishT1 Trim ring finish



Available Top colors:




Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.


Application Notes


Fixed height C-leg tables may beused interactively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.


Stacking glide extenders raise topheight in1/2� increments.

Rectangular tables accommodate18�D suspended, floorstanding ormobile pedestals; 30�D tablesaccommodate 24�D pedestals.


Knoll Office Tables

150

C-leg tables, manually adjustableCascade edge tops


Straight manually adjustable 30� 24� 26� - 291/2� ICES3024A $1,052. $1,104.30� 30� 26� - 291/2� ICES3030A 1,115. 1,167.36� 24� 26� - 291/2� ICES3624A 1,084. 1,136.36� 30� 26� - 291/2� ICES3630A 1,146. 1,198.42� 24� 26� - 291/2� ICES4224A 1,115. 1,167.42� 30� 26� - 291/2� ICES4230A 1,175. 1,227.48� 24� 26� - 291/2� ICES4824A 1,146. 1,198.48� 30� 26� - 291/2� ICES4830A 1,207. 1,259.60� 24� 26� - 291/2� ICES6024A 1,207. 1,259.60� 30� 26� - 291/2� ICES6030A 1,266. 1,318.72� 24� 26� - 291/2� ICES7224A 1,266. 1,318.72� 30� 26� - 291/2� ICES7230A 1,327. 1,379.

Curvilinear corner manually adjustable 42� 24� 26� - 291/2� ICEC4224A 1,450. 1,502.48� 24� 26� - 291/2� ICEC4824A 1,538. 1,590.48� 30� 26� - 291/2� ICEC4830A 1,610. 1,662.

Order Code

Example: ICE S4230 A; 118, 113,T1

I Interaction TableCE Cascade edge topS Straight42 Width30 DepthA Base type118 Top finish113 Base finishT1 Trim ring finish



Available Top Colors:






Application Notes

Manually adjustable tables provideportable, adjustable height surfacesin open plan workstations or privateoffices.

C-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.




Knoll Office Tables

151

Cas

cade

Edg

eTo

pTa

bles

C-leg tables, crank adjustableCascade edge tops


Straight crank adjustable 30� 24� 231/4� - 35� ICES3024D(R/L) $2,001. $2,053.30� 30� 231/4� - 35� ICES3030D(R/L) 2,091. 2,143.36� 24� 231/4� - 35� ICES3624D(R/L) 2,059. 2,111.36� 30� 231/4� - 35� ICES3630D(R/L) 2,122. 2,174.42� 24� 231/4� - 35� ICES4224D(R/L) 2,078. 2,130.42� 30� 231/4� - 35� ICES4230D(R/L) 2,155. 2,207.48� 24� 231/4� - 35� ICES4824D(R/L) 2,122. 2,174.48� 30� 231/4� - 35� ICES4830D(R/L) 2,185. 2,237.60� 24� 231/4� - 35� ICES6024D(R/L) 2,185. 2,237.60� 30� 231/4� - 35� ICES6030D(R/L) 2,244. 2,296.

Curvilinear corner crank adjustable 42� 24� 231/4� - 35� ICEC4224D 2,425. 2,477.48� 24� 231/4� - 35� ICEC4824D 2,515. 2,567.48� 30� 231/4� - 35� ICEC4830D 2,585. 2,637.

Order Code

Example: ICE S4230 DR; 118, 113,T1

I Interaction TableCE Cascade edge topS Straight42 Width30 DepthD Base typeR Right handle location118 Top finish113 Base finishT1 Trim ring finish










Application Notes



The hand crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.

Actual rectangular table widths are1� less than nominal. Actual cornertable widths are 11/2� less thannominal. Glides permit 1/2� leveling.


Knoll Office Tables

152

C-leg tables, Counterforce™ adjustableCascade edge tops


Straight counterbalance adjustable 30� 24� 26� - 41� ICES3024C $2,941. $2,993.30� 30� 26� - 41� ICES3030C 3,002. 3,054.36� 24� 26� - 41� ICES3624C 2,971. 3,023.36� 30� 26� - 41� ICES3630C 3,034. 3,086.42� 24� 26� - 41� ICES4224C 3,002. 3,054.42� 30� 26� - 41� ICES4230C 3,063. 3,115.48� 24� 26� - 41� ICES4824C 3,034. 3,086.48� 30� 26� - 41� ICES4830C 3,094. 3,146.60� 24� 26� - 41� ICES6024C 3,094. 3,146.60� 30� 26� - 41� ICES6030C 3,154. 3,206.

Order Code

Example: ICE S4230 C; 118, 113,T1

I Interaction TableCE Cascade edge topS Straight42 Width30 Depth of returnC Base type118 Top finish113 Base finishT1 Trim ring finish









Application Notes

Adjustable height Counterforce™-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.

Fingertip control allows user toadjust from seated- to standing-workheight (26�-41�) without tools oreffort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.

Note:24�D rectangular Counterforcetables provide only 16�D clearkneespace inside 12�H crossbeam,12� above the floor. ANSI/BIFMArecommends minimum 15�Dkneespace, increasing on a diagonalto 23�D at toe height.

Actual rectangular table widthsare3/16� less than nominal. Forcorner Counterforce applications,see page 104.

Knoll Office Tables

153

Cas

cade

Edg

eTo

pTa

bles

C-leg tables, top crank adjustableCascade edge tops


Straight Top Crank adjustable 30� 24� 271/4� - 431/4� ICES3024K $1,632. $1,684.30� 30� 271/4� - 431/4� ICES3030K 1,705. 1,757.36� 24� 271/4� - 431/4� ICES3624K 1,680. 1,732.36� 30� 271/4� - 431/4� ICES3630K 1,728. 1,780.42� 24� 271/4� - 431/4� ICES4224K 1,694. 1,746.42� 30� 271/4� - 431/4� ICES4230K 1,756. 1,808.48� 24� 271/4� - 431/4� ICES4824K 1,728. 1,780.48� 30� 271/4� - 431/4� ICES4830K 1,782. 1,834.60� 24� 271/4� - 431/4� ICES6024K 1,782. 1,834.60� 30� 271/4� - 431/4� ICES6030K 1,829. 1,881.

Curvilinear Corner Top Crank adjustable 42� 24� 271/4� - 431/4� ICEC4224K 1,978. 2,030.48� 24� 271/4� - 431/4� ICEC4824K 2,051. 2,103.48� 30� 271/4� - 431/4� ICEC4830K 2,107. 2,159.

Order Code

Example: ICE S4230 K; 118, 113

I Interaction TableCE Cascade edge topS Straight42 Width30 DepthK Base type118 Top finish113 Base finish



Base types:K Top crank








Application Notes



The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip is softtextured rubber over steel.

Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.

Knoll Office Tables

154

C-leg tables, electric adjustableCascade edge tops


Straight electirc adjustable 30� 24� 271/4� - 431/4� ICES3024E $2,397. $2,449.30� 30� 271/4� - 431/4� ICES3030E 2,448. 2,500.36� 24� 271/4� - 431/4� ICES3624E 2,422. 2,474.36� 30� 271/4� - 431/4� ICES3630E 2,471. 2,523.42� 24� 271/4� - 431/4� ICES4224E 2,448. 2,500.42� 30� 271/4� - 431/4� ICES4230E 2,497. 2,549.48� 24� 271/4� - 431/4� ICES4824E 2,471. 2,523.48� 30� 271/4� - 431/4� ICES4830E 2,523. 2,575.60� 24� 271/4� - 431/4� ICES6024E 2,523. 2,575.60� 30� 271/4� - 431/4� ICES6030E 2,572. 2,624.

Curvilinear corner electirc adjustable 36� 24� 271/4� - 431/4� ICEC3624E 2,604. 2,656.42� 24� 271/4� - 431/4� ICEC4224E 2,662. 2,714.48� 24� 271/4� - 431/4� ICEC4824E 2,736. 2,788.48� 30� 271/4� - 431/4� ICEC4830E 2,782. 2,834.

Order Code

Example: ICE S4230 E; 118, 113

I Interaction TableCE Cascade edge topS Straight42 Width30 DepthE Base type118 Top finish113 Base finish



Base types:E Electric







Application Notes


Electric adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.


Rectangular table widths are 2� lessthan actual while depth is 1� lessthan actual for safety.Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.

Knoll Office Tables

155

Cas

cade

Edg

eTo

pTa

bles

Interaction basesNo tops

description type w d h pattern no. painted

Fixed height C-leg table base 27� 21� 27� IB 27SB $677.27� 24� 27� IB 27DB 704.33� 21� 27� IB 33SB 693.33� 24� 27� IB 33DB 722.39� 21� 27� IB 39SB 704.39� 24� 27� IB 39DB 733.45� 21� 27� IB 45SB 722.45� 24� 27� IB 45DB 750.57� 21� 27� IB 57SB 750.57� 24� 27� IB 57DB 778.

Manually adjustable C-leg table base 27� 21� 241/2� - 28� IB 27SA 959.27� 24� 241/2� - 28� IB 27DA 986.33� 21� 241/2� - 28� IB 33SA 973.33� 24� 241/2� - 28� IB 33DA 1,003.39� 21� 241/2� - 28� IB 39SA 986.39� 24� 241/2� - 28� IB 39DA 1,015.45� 21� 241/2� - 28� IB 45SA 1,003.45� 24� 241/2� - 28� IB 45DA 1,031.57� 21� 241/2� - 28� IB 57SA 1,031.57� 24� 241/2� - 28� IB 57DA 1,057.

Counterforce adjustable C-leg table base 27� 21� 25� - 40� IB 27SC 2,790.27� 24� 25� - 40� IB 27DC 2,818.33� 21� 25� - 40� IB 33SC 2,807.33� 24� 25� - 40� IB 33DC 2,835.39� 21� 25� - 40� IB 39SC 2,818.39� 24� 25� - 40� IB 39DC 2,848.45� 21� 25� - 40� IB 45SC 2,835.45� 24� 25� - 40� IB 45DC 2,862.57� 21� 25� - 40� IB 57SC 2,862.57� 24� 25� - 40� IB 57DC 2,890.

Order Code

Example: IB 32X; 117, T4

I InteractionB Base only32 Diameter of baseX Base type117 Base finishT4 Trim ring finish


Pattern number logic:1. Interaction2. Base only3-4. Base size5. Base type


Base finishTrim ring finish

Electric bases come with a defaultcolor trim ring.

Application Notes

Interaction bases may be used withexisting or custom size or shapeKnoll systems tops with solid woodcore construction.

T-leg bases support tops from 24� to36�D, centered over 24� feet. Basesfor split top tables have 11�Dcantilever arms (minimum depth ofmonitor surface). Split topmechanism does not include tops.Four star bases are shown with thecorresponding maximum roundtable diameter.

Specify 21�D bases for tops 21�-24�deep. Specify 24�D bases for tops25�-30�D. Tops up to 36�D may besupported on 24�D bases, with 6�overhang at the back of the table.

Table heights and ranges shownabove do not include top thickness.

Adjustable four star base not for usewith tops exceeding 42� in anydimension.

Counterforce base only supportsweight up to 150 lbs.

Split-top mechanisms have a 12�range ( 5 1/2� up and 6 1/2� down )and a plus or minus 15° tilt. 150lbs. lift capacity not including thesurface.

Electric base only supports weightup to 200lbs.

Bases are designed to support topsup to but no more than 16� widerthan the base.

Knoll Office Tables

156



Fixed height T-leg base 39� 24� 27� IB 39T $733.45� 24� 27� IB 45T 750.57� 24� 27� IB 57T 778.

Fixed height bases for split-top tables 33� 24� 27� IB 33DSB 704.39� 24� 27� IB 39DSB 722.45� 24� 27� IB 45DSB 733.

Manually adjustable bases for split-top tables 33� 24� 241/2� - 28� IB 33DSA 986.39� 24� 241/2� - 28� IB 39DSA 1,003.45� 24� 241/2� - 28� IB 45DSA 1,015.

Counterforce bases for split-top tables 27� 24� 25� - 40� IB 27DSC 2,710.33� 24� 25� - 40� IB 33DSC 2,818.39� 24� 25� - 40� IB 39DSC 2,835.45� 24� 25� - 40� IB 45DSC 2,848.

Electric adjustable C-leg table base 22� 21� 26� - 42� IB 22SE 2,146.22� 24� 26� - 42� IB 22DE 2,168.28� 21� 26� - 42� IB 28SE 2,161.28� 24� 26� - 42� IB 28DE 2,182.34� 21� 26� - 42� IB 34SE 2,168.34� 24� 26� - 42� IB 34DE 2,191.40� 21� 26� - 42� IB 40SE 2,182.40� 24� 26� - 42� IB 40DE 2,201.52� 21� 26� - 42� IB 52SE 2,201.52� 24� 26� - 42� IB 52DE 2,222.

Order Code








Application Notes










Knoll Office Tables

157

Inte

ract

ion

Bas

esO

nly



Electric adjustable C-leg table base 58� 21� 26� - 42� IB 58SE $2,221.58� 24� 26� - 42� IB 58DE 2,362.

Keyboard cutout mechanism IBK 422.

Four star base Adjustable, 30�or 36� dia. 28� 28� 24� - 29� IB 28Y 881.Adjustable, 42� dia. 32� 32� 24� - 29� IB 32Y 1,092.Fixed height 30�or 36� dia. 28� 28� 273/4� IB 28X 600.Fixed height 42� dia. 32� 32� 273/4� IB 32X 812.Fixed height 48� dia. 32� 32� 273/4� IB 48X 939.Fixed height, low rotary 32� 32� 17� IB 32M 704.With casters, 30� or 36� dia. 28� 28� 273/4� IB 28W 636.With casters, 42� dia. 32� 32� 273/4� IB 32W 846.

Column base One leg only 5� 5� 273/4� IBZ 255.

Split-top mechanism 44� IB ST 44 986.For 30� straight and 36 x 24� corner 18� IB ST 18 986.For 36� straight and 24� corner 22� IB ST 22 986.For 42� and 48� straight and 30� corner 28� IB ST 28 986.

Electric table memory switch IEC2 103.

Order Code








Application Notes










Knoll Office Tables

158

Accessories


Filler panel for C-leg tables 30� table 22� 2� 15� IFP30 $128.36� table 28� 2� 15� IFP36 140.42� table 34� 2� 15� IFP42 157.48� table 40� 2� 15� IFP48 170.60� or 72� table 52� 2� 15� IFP60 184.

Extender glides, set of 4 – – 1/2� IXG 11.

Casters, set of 4 – – 11/4� IC 34.

Wire manager tray 30� table 21� 4� 3� IWM30 42.36� table 27� 4� 3� IWM36 51.42� table 33� 4� 3� IWM42 57.48� table 39� 4� 3� IWM48 62.60� table 51� 4� 3� IWM60 70.

Order Code

Example: IFP48; 117

I Interaction TableFP Filler panel48 Width117 Finish


Specify paint finish for filler panels.

Note: Filler panels do not work withtop crank or electric adjustablec-leg bases.

Application Notes

Filler panels may be used in fixedor adjustable height C-leg tables toprovide enclosure below horizontalbeam. For full enclosure alsospecify wire manager tray.

For curvilinear corner, hot dog, orsmall boomerang, specify fillerpanel for 36� table. For largeboomerang, specify filler panel for42� table.

Extender glides snap into standardglides or stack to extend levelingrange1/2� for each set ordered.

Locking casters replace standardglides in any Interaction table tofacilitate reconfiguration. Castersraise top height 11/2�.

Wire manager tray attaches underback edge of worksurface to provideadditional wire managementbetween table and panel or wall.

Knoll Office Tables

159

Acc

esso

ries

Introduction to Currents

Currents creates dynamic, advancedperformance work environments fromcoordinated, independent elements –Service Walls, Fence frames, plannabledesks, mobile storage – and existingKnoll office products.

Currents workspaces may bespine-supported or freestanding, orplanned in combination withconventional panel systems.

Knoll Office Tables

160

Introduction to Currents

Currents Service WallsCurrents Service Walls form thestructural core and primary path ofservices distribution for a cluster ofworkstations. Currents Service Wallsmay also create borders for teamworkspaces, conference areas, orcorridors. Service Walls are 5� thick,and are available in three heights:39� for seated visual access; 48� forseated privacy, the most versatileheight for open plan areas requiringsome overhead storage; and 64� forstanding privacy in executive orconference areas.

Service Walls are composed offrames and covers. Frames includestuds on 12� centers, base racewaywith levelling glides, crown andbase. Frames may be specified with1�H compact crown or 4�H standardcrown. All studs have brackets tosupport covers at 5�, 21�, 30�, 39�,48� and 64� above the floor. Crownand raceway covers, structural basecovers from 5� to 21� above the floor,and covers above 21� must bespecified separately.

Structural base covers enableperpendicular panels, worksurfacesupports, or outriggers to be attachedat any point. Structural base coversmay be painted steel, perforated, orupholstered.

Wall covers above 21� snap into wallframe brackets at 12� intervals, andare removable without tools. Coversmay be painted, upholstered,acoustical/tackable upholstered,cable tray, slat wall, or markersurface.

Currents Walls plan in anycombination of 48�, 60� or 72� widthscorresponding to the total length ofWall required. Add outriggers, T-endand L-end panels, or 90° or 120°post connections at each end ofService Wall spine. Straightconnectors are included with eachframe kit to join frames of the sameheight in a straight line. High-lowstraight connectors are availableseparately. Service Walls requireoutriggers or perpendicular systemspanels every 8�.

Power components are specifiedseparately. Knoll universal 2+2 or3+3 power components may beinstalled in the base of the Wall or atworksurface height. Base power railsaccept two duplex outlets on eachside of a panel at raceway height.Desk-height outlet modules accepttwo duplex outlets on each faceabove or below the worksurface. Oneor two modules (four duplex outletseach side) may be located in any 12�wide stud bay. Locate outlet modulesand related 12�W outlet coversbefore specifying widths of adjacentpanel covers.

The interior of the Wall between 21�and the crown offers unobstructed, 1�deep, lay-in cabling on each surface.Vertical wire management and excesscord capability is unobstructed21/2� x 10� between studs.

Service Walls with standard 4�Hcrown enable upmounted shelves,overhead storage cabinets, andcanopy lighting at any point on oneor both sides. Translucent,upholstered or frameless glassadd-up panels fit into a centerchannel anywhere along the crownfor 12�, 21� or 28� of additionalenclosure.

Stackable add-up panels are alsoavailable in translucent, upholstered,marker or glazed surface. First uppanels are 12�, 21� or 28� high; nextup stacking panels are 16� high.

First up panels can be mounted onany 3� increment along Service Wallcrown, or correspond in width tolinkable screens.

Wall mounted componentsWorksurface supports, perpendicularlinkable screens, and systems panelsmay be connected to the CurrentsWall at any point. Mobile screens arealso available, in translucentfiberglass or upholstered surface.

Currents linkable screens, intranslucent, glazed, upholstered ormarker surface, define workstationsand extend the Service Wall horizon.Linkable screens connect in L, T, X,Y and V configurations and acceptstackable add-up panels. First uppanels are 16�, 25� or 32�H. Next uppanels are 16�H.

Currents worksurfaces are designedfor computer use as the primary workactivity. Deep corners are shaped forlarge monitors, and include widekeyboard/mouse areas. Straightworksurfaces feature softly curved orflat fronts. Extended cornersincorporate an adjacent work areaand a computer corner into a single,uninterrupted surface. Universalworksurfaces include a steel stiffenerfor high load capacity and cordmanagement.

Service Walls cantileverworksurfaces up to 24�D, or provideend support for any size worksurface.Support columns, independentC-legs, and floorstanding pedestalsare also available for worksurfacesupport. Cantilevers are adjustablein 1� increments for 24�-34�Hworksurface. End support bracketsand C-legs are fixed height for 28�Hworksurface, or adjust for 24�-34�worksurface height.

Service Wall standard height 4�Hcrowns can upmount open shelves,overhead storage, task and ambientlighting, and add-up panels.

Service Wall standard height 4�Hcrowns can upmount or downmountReuter overhead storage, openshelves, or Equity overhead at anypoint. Reuter storage and Equityoverheads can only be downmountedfrom Walls with 1�H compact crown.Brackets are available to downmountMorrison Options, Series 2 forMorrison, Dividends, Series forDividends or Equity overheadcabinets from 64�H Service Wallwith either compact or standardcrown.

Knoll Office Tables

161

Cur

rent

s

Introcution to Currents

Currents DesksCurrents desks are freestandingfurniture elements optimized for thehigh-mobility, computer-based office.Currents corner desks and mobilepedestals can work together to formefficient, two-element workstations.

Currents desks are available in basicversions for use with CurrentsService Walls and screens, orequipped with service beams tosupport privacy screens, modularpower distribution, and expandeddata cabling. Desk beams can belinked in powered clusters.Beam-mounted privacy screens maybe shared back-to-back; both sidesare tackable. Upholstered screenheights reach 39� or 48� horizons.

All desks include horizontal andvertical cable managers. Optionalservice beam may be powered withKnoll 2+2 or 3+3 modular powercomponents, and carries up to 50lay-in Category 5 cables. Datacabling can be protected by optionaldata tray covers. Standard knockoutsare provided at each end of the datatray for Knoll PDC Module dataconnector plates.

All Currents desks areheight-adjustable. Pin-set versionhas range of 24� to 30�H in 1�increments. Handcrank version letsthe user adjust continuously from 24�to 34�H. Desks have C-legs for kneeclearance, and have interchangeablerear casters or glides for easymobility.

Desks are available in corner,extended corner, and curved-frontstraight shapes. Worksurface cornersare eased to make alignment ofmobile units less critical.

Desks and wall-mountedworksurfaces accept clamp-onworkshelves. Workshelves provideconvenient binder/book accessadjacent to computer displays.

Currents WorktablesCurrents mobile worktables extendthe worksurface area and provideflexible guest/conference spaces.Rounded corners enable informalplacement near other worksurfaces.All worktables are available withcasters or levelling glides.

Adjustable height worktables adjustfrom 24� to 30� high in 1�increments.

Currents StorageCurrents freestanding storagecomponents are designed formobility and space efficiency.

Pedestals are available mobile orfixed, with 2 files or combination 4�personal, 7� data, and 11� file drawerfronts, fitting below standard 28�worksurface height. Data/file mobilepedestals are low enough to rollunder desks set lower than 28�.Mobile pedestals include top, castersand handle. Fixed pedestals include2� levelling glides.

Reuter vertical storage has a rotatingdoor, shelves and pull-out fileframes, and a wardrobe area. Reuterstorage is 21� wide so open door fitswithin 24� planning footprint.

Reuter vertical storage is available48�H, with painted or worksurfacetop, or 64�H with painted top only.

Knoll Office Tables

162

Currents Color Program

Core finishes

Specify Core finishes for all new customers

Core LegacyWall

covers

Wallends,trim,

bracketsand

outrig-gers

Storagefronts

Storagecases

Work-surfaces

andshelves

Currentsworksur-

faceedges

Currentsfor

Morrisonworksur-

faceedges

Pedestalsand

ReuterOver-head

611 Beige Mist Metallic • • • • P2

118 Bright White • • • • • • P3

112 Brown • • • • P1

123 Brushed Grey •122 Brushed Sand •113 Dark Grey Y3 • • • • P1

128 Fog • •114 Folkstone Grey LA/U • • • • • • P1

111 Jet Black • • • • • • P1

124 Medium Cherry •115 Medium Grey Y2 • • • • P1

612 Medium Metallic Grey J • • • • P2

121 Micro Grey •129 Micro Sand •126 Natural Cherry •125 Natural Maple •119 Pumice F • •116 Sandstone • • • • P1

613 Silver 3 • • • • P3

117 Soft Grey E/M42 • • • • • • P1

813 Trim Grey 5 • •127 Walnut •V1 Maple Techgrain 4/M C6J2 Y821 C6J2

V1 Cherry Techgrain 6/R C6J3 Y831 C6J3

V1 Medium brown mahogany Techgrain 7/I C6J4 C6F3 C6J4

V1 Medium red mahogany Techgrain 8/C C6J5 C6F4 C6J5

V1 American cherry Techgrain 9/P C6J6 C6F5 C6J6

V2 Maple K V316 V316 V316

V2 American cherry X C6F6 C6F6 C6F6

V2 Medium red mahogany Z C6F7 C6F7 C6F7

Default trim information:Trim Grey is the integral color for worksurface, desk and worktable top edge, mobile screens, linkable screen and add-up panel trim, privacy screen and windowtrim, pedestal pulls.Black: wall frames and drawers interior, wall, screen, storage glides and casters.Light grey: Ambient lightsTranslucent crystal: fiberglass surfaces for mobile screens, linkable screens and add-up panelsThe new Core finish 113 Dark Grey is not a match to the Currents Legacy finish NV. It is a match to the Dividends Legacy finish Y3.The new Core finish 115 Medium Grey is not a match to the Currents Legacy finish NJ. It is a match to the Dividends Legacy finish Y2.

Veneer finishes for Currents worksurfaces and storage fronts are available through Custom Product Development.

Knoll Office Tables

163

Cur

rent

s

Currents Legacy Finishes

Work-surfaces

Wall andStructural

Basecovers

CrownCovers

Crown end caps,connectors and

connector top caps,raceway covers,

worksurfacebrackets and

outriggers

Straight legs, C-legs, corner

legs, desk screenclamps,

window frames(textured only)

Storagefronts

StorageCases

Plastic Laminates Light Grey L

Pumice F

Winter grey V

Slate S

Snow B

Folkstone Grey U

Pearwood PA

Fiber E

Sand D

Medium Grey G

Soft grey M42

Wood GrainLaminates

Clear Maple CM

Veneer Group 2 Maple Techgrain® 4 M

Cherry Techgrain® 6 R

Medium brown mahoganyTechgrain®

7 I

Medium red mahoganyTechgrain®

8 C

American cherryTechgrain®

9 P

Veneer Group 3 Maple K K

American cherry X X

Medium red mahogany Z Z

Paint Group 2 Metallic Flint * 2 2 2 2 2 2

Light metallic grey * U U U U U U

Medium metallic grey * J J J J J J

Dark metallic grey * V V V V V V

Light metallic tan * W W W W W W

Metallic beige * H H H H H H

Soft Grey * E E E

Medium Grey (Slate) * Y2 Y2 Y2

Taupe * R R R

Aluminum A

Paint Group 3 Silver * 3 3 3 3 3 3

White * B B B B B B

Specify legacy finishes to match existing product only. Legacy finishes are not available for new customers.

Trim grey is the integral color for worksurface, desk and worktable top edge, mobile screen and add-up panel trim, privacy screen and window trim, pedestal pullsWall, screen and storage glides, glide cones and casters are integral color Black.Wall frames and pedestal drawer interiors are painted Black.Ambient lights are painted Light greyFiberglass surfaces for mobile screens, linkable screens and add-up panels is Translucent crystalLinkable screen feet are painted Trim grey

Note: Add 10% to the list price of any laminate product when specifying a legacy laminate.

Knoll Office Tables

164

Worksurface supportsfreestanding

description type application w d h pattern no. paint

Straight leg Adjustable 2� 4� 23-29� AB1 I27A(G/C) ( ) $355.Fixed 2� 4� 27� AB1 I27F(G/C) ( ) 182.Low 2� 4� 25� AB1 I25(G/C) ( ) 182.

C-leg, adjustable 24�D Left 2� 21� 23-29� AB1 CL24L ( )( ) 393.Right 2� 21� 23-29� AB1 CL24R ( )( ) 393.

30�D Left 2� 27� 23-29� AB1 CL30L ( )( ) 432.Right 2� 27� 23-29� AB1 CL30R ( )( ) 432.

C-leg, fixed height 24�D Left 2� 21� 27� AB1 CLF24L ( )( ) 329.Right 2� 21� 27� AB1 CLF24R ( )( ) 329.

30�D Left 2� 27� 27� AB1 CLF30L ( )( ) 360.Right 2� 27� 27� AB1 CLF30R ( )( ) 360.

Corner leg Corner worksurfaces 4� 4� 23-29� AB1 VL ( )( ) 329.

Order Code

Example: AB1 CL24L 612 G

AB1 SupportCL C-leg24 DepthL Left612 FinishG Glides


Specify painted finishes for supportcolumn, C-leg, and brackets.

C-Leg casters/glides:C Rear casters/front glidesG All glides

Casters/glides combination has nolevelling. All-glides versionprovides 13/4� levelling range.

Application Notes

Specify two straight legs undershared worksurface. Straight legsare fixed at 27�H (28� top height) oradjustable 23�-29� (24�-30� topheight).

C-legs support one end of anycorresponding depth Currentsworksurface. Corner legs supportonly the back corner of a Currentscorner worksurface. Specify C-legsfor side edges of Currents cornerand extended corner worksurfaces.

Adjustable C-legs and corner legsare adjustable in height to supportunderside of worksurface at 1�increments from 23� to 29� (24� to30� Currents top height). Fixedheight C-legs support desk at 28�H.Fixed height C-legs do not acceptservice beams.

Straight legs may not be used withCurrents universal worksurfaces orCurrents worksurfaces for Morrisonto create freestanding tables.

Knoll Office Tables

165

Cur

rent

s

Deskspin-set adjustableextended left

description w (l) w (r) h pattern no. lam.

24�D both sides corner desk, extended left 60� 36� 24-30� AD C53 SF ( )( )( ) $1,805.60� 48� 24-30� AD C54 SF ( )( )( ) 1,940.72� 36� 24-30� AD C63 SF ( )( )( ) 1,940.72� 48� 24-30� AD C64 SF ( )( )( ) 2,072.84� 48� 24-30� AD C74 SF ( )( )( ) 2,206.

30�D left/24�D right corner desk, extended left 60� 48� 24-30� AD C54 LF ( )( )( ) 2,045.72� 48� 24-30� AD C64 LF ( )( )( ) 2,179.84� 48� 24-30� AD C74 LF ( )( )( ) 2,310.

30�D both sides corner desk, extended left 60� 48� 24-30� AD C54 DF ( )( )( ) 2,152.72� 48� 24-30� AD C64 DF ( )( )( ) 2,286.84� 48� 24-30� AD C74 DF ( )( )( ) 2,418.

Order Code

Example: AD C64 LF 117 117 G

AD DeskC Shape6 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides


Specify desk shape:C Corner

Width left/width right:3 36�4 48�5 60�6 72�7 84�

Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides

Base type:F Manually adjustable

Specify desk top and base finish.

Veneer finishes for desks areavailable through Custom ProductDevelopment.

Specify glides/casters:C Rear castersG Glides

Worksurface edges are trim grey.

Application Notes

Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.

Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.

Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.

Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.

Desks accept clamp-on workshelvesand service beams which supportprivacy screens, distribute powerand data, and are linkable.

Knoll Office Tables

166

Deskspin-set adjustableextended right

description w(l) w(r) h pattern no. lam.

24�D both sides corner desk, extended right 36� 60� 24-30� AD C35 SF ( )( )( ) $1,805.36� 72� 24-30� AD C36 SF ( )( )( ) 1,940.48� 60� 24-30� AD C45 SF ( )( )( ) 1,940.48� 72� 24-30� AD C46 SF ( )( )( ) 2,072.48� 84� 24-30� AD C47 SF ( )( )( ) 2,206.

30�D right/24�D left corner desk, extended right 48� 60� 24-30� AD C45 RF ( )( )( ) 2,045.48� 72� 24-30� AD C46 RF ( )( )( ) 2,179.48� 84� 24-30� AD C47 RF ( )( )( ) 2,310.

30�D both sides 48� 60� 24-30� AD C45 DF ( )( )( ) 2,152.48� 72� 24-30� AD C46 DF ( )( )( ) 2,286.48� 84� 24-30� AD C47 DF ( )( )( ) 2,418.

Order Code

Example: AD C46 SF 117 117 G

AD DeskC Shape4 Width left6 Width rightS Depth (24� both sides)F Base type117 Desktop finish117 Desk base finishG Glides



Width left/width right:3 36�4 48�5 60�6 72�7 84�







Application Notes


Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.

Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.



Knoll Office Tables

167

Cur

rent

s

Deskspin-set adjustablecorner desk

description w(l) w(r) h pattern number lam.

24�D both sides corner desk 42� 42� 24-30� AD C4242 SF ( )( )( ) $1,738.48� 48� 24-30� AD C44 SF ( )( )( ) 1,805.60� 60� 24-30� AD C55 SF ( )( )( ) 2,006.

30�D left/24�D right corner desk 42� 42� 24-30� AD C4242 LF ( )( )( ) 1,779.48� 48� 24-30� AD C44 LF ( )( )( ) 1,844.60� 60� 24-30� AD C55 LF ( )( )( ) 2,045.

24�D left/30�D right corner desk 42� 42� 24-30� AD C4242 RF ( )( )( ) 1,779.48� 48� 24-30� AD C44 RF ( )( )( ) 1,844.60� 60� 24-30� AD C55 RF ( )( )( ) 2,045.

30�D both sides corner desk 42� 42� 24-30� AD C4242 DF ( )( )( ) 1,819.48� 48� 24-30� AD C44 DF ( )( )( ) 1,885.60� 60� 24-30� AD C55 DF ( )( )( ) 2,085.

Order Code

Example: AD C44 LF 117 117 G

AD DeskC Shape4 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides



Width left/width right:4 48�5 60�






Worksurface edges are trim grey.Clear Maple not available on 60�Wx 60�D corner desks.

Application Notes


Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.



Knoll Office Tables

168

Deskspin-set adjustablestraight desk

description w(l) w(r) h pattern number lam.

24�D straight desk, curved front 36� 24� 24-30� AD S36 SF ( )( )( ) $1,123.42� 24� 24-30� AD S42 SF ( )( )( ) 1,151.48� 24� 24-30� AD S48 SF ( )( )( ) 1,175.60� 24� 24-30� AD S60 SF ( )( )( ) 1,229.72� 24� 24-30� AD S72 SF ( )( )( ) 1,284.84� 24� 24-30� AD S84 SF ( )( )( ) 1,336.

30�D straight desk, curved front 36� 30� 24-30� AD S36 DF ( )( )( ) 1,243.42� 30� 24-30� AD S42 DF ( )( )( ) 1,269.48� 30� 24-30� AD S48 DF ( )( )( ) 1,296.60� 30� 24-30� AD S60 DF ( )( )( ) 1,364.72� 30� 24-30� AD S72 DF ( )( )( ) 1,443.

Order Code

Example: AD S48 DF 117 117 G

AD DeskS Shape48 WidthD DepthF Base type117 Desktop finish117 Desk base finishG Glides


Specify desk shape:S Straight

Worksurface depth:S 24�D both sidesD 30�D both sides






Application Notes


Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.



Knoll Office Tables

169

Cur

rent

s

Deskshandcrank adjustableextended left


24�D both sides corner desk, extended left 60� 36� 24-34� AD C53 SH ( )( )( ) $2,739.60� 48� 24-34� AD C54 SH ( )( )( ) 2,873.72� 36� 24-34� AD C63 SH ( )( )( ) 2,873.72� 48� 24-34� AD C64 SH ( )( )( ) 3,007.84� 48� 24-34� AD C74 SH ( )( )( ) 3,142.

30�D left/24�D right corner desk, extended left 60� 48� 24-34� AD C54 LH ( )( )( ) 2,980.72� 48� 24-34� AD C64 LH ( )( )( ) 3,114.84� 48� 24-34� AD C74 LH ( )( )( ) 3,247.

30�D both sides corner desk, extended left 60� 48� 24-34� AD C54 DH ( )( )( ) 2,980.72� 48� 24-34� AD C64 DH ( )( )( ) 3,114.84� 48� 24-34� AD C74 DH ( )( )( ) 3,247.

Order Code

Example: AD C53 SH 117 117 G

AD DeskC Shape5 Width left3 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides



Width left, width right:3 36�4 48�5 60�6 72�7 84�


Base type:H Handcrank adjustable



Specify:C Rear castersG Glides


Application Notes

Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.

Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.


Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.

Handcrank mechanism is rated at300 lbs. maximum weight.


Knoll Office Tables

170

Deskshandcrank adjustableextended right


24�D both sides corner desk, extended right 36� 60� 24-34� AD C35 SH ( )( )( ) $2,739.36� 72� 24-34� AD C36 SH ( )( )( ) 2,873.48� 60� 24-34� AD C45 SH ( )( )( ) 2,873.48� 72� 24-34� AD C46 SH ( )( )( ) 3,007.48� 84� 24-34� AD C47 SH ( )( )( ) 3,142.

30�D right/24�D left corner desk, extended left 48� 60� 24-34� AD C45 RH ( )( )( ) 2,980.48� 72� 24-34� AD C46 RH ( )( )( ) 3,114.48� 84� 24-34� AD C47 RH ( )( )( ) 3,247.

30�D both sides corner desk, extended left 48� 60� 24-34� AD C45 DH ( )( )( ) 2,980.48� 72� 24-34� AD C46 DH ( )( )( ) 3,114.48� 84� 24-34� AD C47 DH ( )( )( ) 3,247.

Order Code












Application Notes

Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.

Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.


Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.



Knoll Office Tables

171

Cur

rent

s

Deskshandcrank adjustablecorner desk


24�D both sides corner desk 42� 42� 24-34� AD C4242 SH ( )( )( ) $2,623.48� 48� 24-34� AD C44 SH ( )( )( ) 2,739.60� 60� 24-34� AD C55 SH ( )( )( ) 2,939.

30�D left/24�D right corner desk 42� 42� 24-34� AD C4242 LH ( )( )( ) 2,661.48� 48� 24-34� AD C44 LH ( )( )( ) 2,778.60� 60� 24-34� AD C55 LH ( )( )( ) 2,980.

24�D left/30�D right corner desk 42� 42� 24-34� AD C4242 RH ( )( )( ) 2,661.48� 48� 24-34� AD C44 RH ( )( )( ) 2,778.60� 60� 24-34� AD C55 RH ( )( )( ) 2,980.

30�D both sides corner desk 48� 48� 24-34� AD C44 DH ( )( )( ) 2,821.60� 60� 24-34� AD C55 DH ( )( )( ) 3,022.

Order Code





Width left, width right:4 48�5 60�






Worksurface edges are trim grey.Clear Maple is not available on60�W x 60�D corner desks.

Application Notes

Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge.

Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.

Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.



Knoll Office Tables

172

Deskshandcrank adjustablestraight desk


24�D straight desk, curved front 36� 24� 24-34� AD S36 SH ( )( )( ) $1,789.42� 24� 24-34� AD S42 SH ( )( )( ) 1,818.48� 24� 24-34� AD S48 SH ( )( )( ) 1,844.60� 24� 24-34� AD S60 SH ( )( )( ) 1,898.72� 24� 24-34� AD S72 SH ( )( )( ) 1,951.84� 24� 24-34� AD S84 SH ( )( )( ) 2,006.

30�D straight desk, curved front 36� 30� 24-34� AD S36 DH ( )( )( ) 1,911.42� 30� 24-34� AD S42 DH ( )( )( ) 1,940.48� 30� 24-34� AD S48 DH ( )( )( ) 1,963.60� 30� 24-34� AD S60 DH ( )( )( ) 2,033.72� 30� 24-34� AD S72 DH ( )( )( ) 2,112.

Order Code

Example: AD S48 DH 117 117 G

AD DeskS Shape48 WidthD DepthH Base type117 Desktop finish117 Base finishG Glides



For straight desks specify:Width:36 36�42 42�48 48�60 60�72 72�84 84�

Worksurface depth:S 24�DD 30�D






Application Notes

Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Hand crank may be installedon the left or right side of anystraight or symmetrical corner desk.

Desks may be specified with fixedfront glides and rear casters orlevelling glides with 13/4� travel.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.

Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.



Knoll Office Tables

173

Cur

rent

s

Desks with service beampin-set adjustableextended left


24�D both sides corner desk, with beam extendedleft

60� 36� 24-30� AD C53 SB ( )( )( ) $2,580.60� 48� 24-30� AD C54 SB ( )( )( ) 2,754.72� 36� 24-30� AD C63 SB ( )( )( ) 2,754.72� 48� 24-30� AD C64 SB ( )( )( ) 2,929.84� 48� 24-30� AD C74 SB ( )( )( ) 3,261.

30�D left/24�D right corner desk, with beamextended left

60� 48� 24-30� AD C54 LB ( )( )( ) 2,859.72� 48� 24-30� AD C64 LB ( )( )( ) 3,032.84� 48� 24-30� AD C74 LB ( )( )( ) 3,368.

30�D both sides corner desk, with beam extendedleft

60� 48� 24-30� AD C54 DB ( )( )( ) 3,206.72� 48� 24-30� AD C64 DB ( )( )( ) 3,339.84� 48� 24-30� AD C74 DB ( )( )( ) 3,473.

Order Code

Example: AD C64 SB 117 117 G

AD DeskC Shape6 Width left4 Width rightS DepthB Base type117 Desktop finish117 Desk base finishG Glides





Base type:B Adjustable with beam





Application Notes

Desks with service beam havepower distribution capability,separate lay-in wire management,and sockets for privacy screens.Pin-set worksurface can be installedat 24�- 30� high, in 1� increments.

Beam provides privacy screensupport, modular powerdistribution, lay-in cabledistribution, and modesty to 14�above floor level. Service beams canbe linked for continuous power/datadistribution through adjacent deskswith service beams.

Extended corner desks providecomputer corner plus adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges.

Desks may be specified with fixedfront glides and rear casters orlevelling glides with 13/4� travel.

Corner desk beams have fouropenings for Knoll PDC modules.Specify power distributioncomponents separately.

Desks accept clamp-onworkshelves.

Knoll Office Tables

174

Desks with service beampin-set adjustableextended right


24�D both sides corner desk, with beam extendedright

36� 60� 24-30� AD C35 SB ( )( )( ) $2,580.36� 72� 24-30� AD C36 SB ( )( )( ) 2,754.48� 60� 24-30� AD C45 SB ( )( )( ) 2,754.48� 72� 24-30� AD C46 SB ( )( )( ) 2,929.48� 84� 24-30� AD C47 SB ( )( )( ) 3,261.

30�D right/24�D left corner desk, with beamextended right

48� 60� 24-30� AD C45 RB ( )( )( ) 2,859.48� 72� 24-30� AD C46 RB ( )( )( ) 3,032.48� 84� 24-30� AD C47 RB ( )( )( ) 3,368.

30�D both sides corner desk, with beam extendedright

48� 60� 24-30� AD C45 DB ( )( )( ) 3,206.48� 72� 24-30� AD C46 DB ( )( )( ) 3,339.48� 84� 24-30� AD C47 DB ( )( )( ) 3,473.

Order Code












Application Notes


Beam provides privacy screensupport, modular powerdistribution, lay-in cabledistribution, and modesty to 14�above floor level. Service beams canbe linked for continuous power/datadistribution through adjacent deskswith service beams.





Knoll Office Tables

175

Cur

rent

s

Desks with service beampin-set adjustablecorner desk


24�D both sides corner desk with beam 42� 42� 24-30� AD C4242 SB ( )( )( ) $2,570.48� 48� 24-30� AD C44 SB ( )( )( ) 2,580.60� 60� 24-30� AD C55 SB ( )( )( ) 2,821.

30�D left/24�D right corner desk with beam 42� 42� 24-30� AD C4242 LB ( )( )( ) 2,610.48� 48� 24-30� AD C44 LB ( )( )( ) 2,621.60� 60� 24-30� AD C55 LB ( )( )( ) 2,859.

24�D left/30�D right corner desk with beam 42� 42� 24-30� AD C4242 RB ( )( )( ) 2,610.48� 48� 24-30� AD C44 RB ( )( )( ) 2,621.60� 60� 24-30� AD C55 RB ( )( )( ) 2,859.

30�D both sides corner desk with beam 42� 42� 24-30� AD C4242 DB ( )( )( ) 2,649.48� 48� 24-30� AD C44 DB ( )( )( ) 2,791.60� 60� 24-30� AD C55 DB ( )( )( ) 2,901.

Order Code










Specify:

C Rear castersG Glides

Worksurface edges are trim grey.Clear Maple is not available on60�W x 60�D corner desks.

Application Notes


Beam provides excess cord storage,continuous power and lay-in cabledistribution, privacy screen support,and modesty to 14� above floorlevel. Service beams can be linkedfor continuous power/datadistribution through adjacent deskswith service beams.

Nominal worksurface depthsinclude 13/4� cable/connector spaceat back edge.




Knoll Office Tables

176

Desks with service beampin-set adjustablestraight desk


24�D straight desk, curved front 36� 24� 24-30� AD S36 SB ( )( )( ) $1,458.42� 24� 24-30� AD S42 SB ( )( )( ) 1,505.48� 24� 24-30� AD S48 SB ( )( )( ) 1,549.60� 24� 24-30� AD S60 SB ( )( )( ) 1,643.72� 24� 24-30� AD S72 SB ( )( )( ) 1,737.84� 24� 24-30� AD S84 SB ( )( )( ) 1,933.

30�D straight desk, curved front 36� 30� 24-30� AD S36 DB ( )( )( ) 1,575.42� 30� 24-30� AD S42 DB ( )( )( ) 1,625.48� 30� 24-30� AD S48 DB ( )( )( ) 1,672.60� 30� 24-30� AD S60 DB ( )( )( ) 1,777.72� 30� 24-30� AD S72 DB ( )( )( ) 1,898.

Order Code

Example: AD S72 DB 117 117 G

AD DeskS Shape72 WidthD DepthB Base type117 Desktop finish117 Desk base finishG Glides



For straight desks specify:

Width:36 36�42 42�48 48�60 60�72 72�84 84�







Application Notes



Straight desks have slightly curvedfront edge, to a minimum of 1� extradepth at center. Nominalworksurface depths include 13/4�cable/connector space at back edge.


Straight desk beams have twoopenings for Knoll PDC modules.Specify power distributioncomponents separately.


Knoll Office Tables

177

Cur

rent

s

Desks with service beamhandcrank-adjustableextended left


24�D both sides corner desk, extended left 60� 36� 24-34� AD C53 SA ( )( )( ) $3,516.60� 48� 24-34� AD C54 SA ( )( )( ) 3,690.72� 36� 24-34� AD C63 SA ( )( )( ) 3,690.72� 48� 24-34� AD C64 SA ( )( )( ) 3,864.84� 48� 24-34� AD C74 SA ( )( )( ) 4,196.

30�D left/24�D right corner desk, extended left 60� 48� 24-34� AD C54 LA ( )( )( ) 3,796.72� 48� 24-34� AD C64 LA ( )( )( ) 3,970.84� 48� 24-34� AD C74 LA ( )( )( ) 4,303.

30�D both sides corner desk, extended left 60� 48� 24-34� AD C54 DA ( )( )( ) 3,915.72� 48� 24-34� AD C64 DA ( )( )( ) 4,103.84� 48� 24-34� AD C74 DA ( )( )( ) 4,303.

Order Code

Example: AD C64 SA 117 117 C

AD DeskC Shape6 Width left4 Width rightS DepthA Base type117 Desktop finish117 Base finishC Casters




Worksurface depth:S 24�D both sidesD 30�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D left

Base type:A Handcrank adjustable with

beam





Application Notes

Handcrank desks with service beamare mobile, adjustable desks withintegral wire management, powerdistribution capability, and privacyscreen inserts.

Handcrank adjustable desk adjustscontinuously from 24-34�H withcollapsible crank under front edge.Handcrank is located on theextended side of extended cornerdesks.

Beam provides privacy screensupport, modular powerdistribution, lay-in cable powerdistribution, and modesty to 14�above floor level. Service beams canbe linked for continuous power/datadistribution through adjacent deskswith service beams.


Desks may be specified on fixedfront glides and rear casters or 21/4�adjustable levelling glides with 13/4�travel.

Corner desk beams have fouropenings for Knoll PDC modules.


Knoll Office Tables

178

Desks with service beamhandcrank-adjustableextended right


24�D both sides corner desk, extended right 36� 60� 24-34� AD C35 SA ( )( )( ) $3,516.36� 72� 24-34� AD C36 SA ( )( )( ) 3,690.48� 60� 24-34� AD C45 SA ( )( )( ) 3,690.48� 72� 24-34� AD C46 SA ( )( )( ) 3,864.48� 84� 24-34� AD C47 SA ( )( )( ) 4,196.

30�D right/24�D left corner desk, extended right 48� 60� 24-34� AD C45 RA ( )( )( ) 3,796.48� 72� 24-34� AD C46 RA ( )( )( ) 3,970.48� 84� 24-34� AD C47 RA ( )( )( ) 4,303.

30�D both sides corner desk, extended right 48� 60� 24-34� AD C45 DA ( )( )( ) 3,915.48� 72� 24-34� AD C46 DA ( )( )( ) 4,103.48� 84� 24-34� AD C47 DA ( )( )( ) 4,303.

Order Code








beam





Application Notes


Handcrank adjustable desk adjustscontinuously from 24-34�H withcollapsible crank under front edge.Handcrank is located on theextended side of extended cornerdesks.

Beam provides privacy screensupport, modular powerdistribution, lay-in cable powerdistribution, and modesty to 14�above floor level. Service beams canbe linked for continuous power/datadistribution through adjacent deskswith service beams.





Knoll Office Tables

179

Cur

rent

s

Desks with service beamhandcrank-adjustablecorner desk


24�D both sides corner desk 42� 42� 24-34� AD C4242 SA ( )( )( ) $3,505.48� 48� 24-34� AD C44 SA ( )( )( ) 3,516.60� 60� 24-34� AD C55 SA ( )( )( ) 3,756.

30�D left/24�D right corner desk 42� 42� 24-34� AD C4242 LA ( )( )( ) 3,546.48� 48� 24-34� AD C44 LA ( )( )( ) 3,555.60� 60� 24-34� AD C55 LA ( )( )( ) 3,796.

24�D left/30�D right corner desk 42� 42� 24-34� AD C4242 RA ( )( )( ) 3,546.48� 48� 24-34� AD C44 RA ( )( )( ) 3,555.60� 60� 24-34� AD C55 RA ( )( )( ) 3,796.

30�D both side corner desk 48� 48� 24-34� AD C44 DA ( )( )( ) 3,594.60� 60� 24-34� AD C55 DA ( )( )( ) 3,837.

Order Code








beam

Specify handcrank left or right sideof desk:L leftR right





Application Notes


Handcrank adjustable base adjustscontinuously from 24-34�H withcollapsible crank under front edge.


Nominal worksurface depthsinclude 13/4� cable/connector spaceat back edge.




Knoll Office Tables

180

Desks with service beamhandcrank-adjustablestraight desk


24�D straight desk, curved front 36� 24� 24-34� AD S36 SA ( )( )( ) $2,124.42� 24� 24-34� AD S42 SA ( )( )( ) 2,173.48� 24� 24-34� AD S48 SA ( )( )( ) 2,218.60� 24� 24-34� AD S60 SA ( )( )( ) 2,310.72� 24� 24-34� AD S72 SA ( )( )( ) 2,406.84� 24� 24-34� AD S84 SA ( )( )( ) 2,601.

30�D straight desk, curved front 36� 30� 24-34� AD S36 DA ( )( )( ) 2,244.42� 30� 24-34� AD S42 DA ( )( )( ) 2,293.48� 30� 24-34� AD S48 DA ( )( )( ) 2,339.60� 30� 24-34� AD S60 DA ( )( )( ) 2,446.72� 30� 24-34� AD S72 DA ( )( )( ) 2,566.

Order Code

Example: AD S60 SA 117 117 C

AD DeskS Shape60 WidthS DepthA Base type117 Desktop finish117 Base finishC Casters



For straight desks specify:

Width:36 36�42 42�48 48�60 60�72 72�84 84�



beam



Casters/no casters:C Rear castersG Glides


Application Notes


Handcrank adjustable base adjustscontinuously from 24-34�H withcollapsible crank under front edge.Handcrank may be installed on theleft or right side of any straight orsymmetrical corner desk.


Straight desks have slightly curvedfront edge, to a minimum of 1� extradepth at center. Nominalworksurface depths include 13/4�cable/connector space at back edge.


Straight desk beams have twoopenings for Knoll PDC modules.


Knoll Office Tables

181

Cur

rent

s

Above-desk storage and lighting for desksworkshelf and T5 task light

description type w d h pattern no. paint Standard Advanced

Workshelf 21� 13� 6� AA1WS24( ) $505.27� 13� 6� AA1WS30( ) 532.33� 13� 6� AA1WS36( ) 560.45� 13� 6� AA1WS48( ) 602.

Workshelf dividers (set of 5) AA1WSD( ) 139.

Task Light Used with 24� and wider workshelf 19� 4� 11/2� AA2T5E19 ( ) 157. n/aUsed with 30� and wider workshelf 25� 4� 11/2� AA2T5E25 ( ) 199. 388.Used with 48� and wider workshelf 37� 4� 11/2� AA2T5E37 ( ) 221. 424.

Order Code

Example: AA1 WS24 117

AA1 AccessoryWS Workshelf24 Width117 Finish


Specify painted finishes for workshelfand dividers.

Specify:

Width - Task Lights mount incabinets and shelves at least 6�wider than light width.

Type:S StandardA Advanced

Specify suffix -CH and add $45 listfor City of Chicago installations.Example: AA2T5E19S-CH

All housings are black.

Application Notes

Workshelf mounts anywhere alongback of desk independent of privacyscreens. Workshelf includesuprights and clamps for Currents,Equity, or Morrison 11/4�worksurfaces.

Task lights mount into the recess inthe underside of overhead cabinetsand shelves at least 6� wider thantask light width.

Task lights include T5 cool white(4100K) fluorescent lamp,electronic ballast, 9� groundedcorset, prismatic lens, rockerswitch, one cord exit managementclip and mounting hardware.

Task light cordset is center exit. Onsmaller units cord exit is off-center,but still not handed.

Task lights are TCLP compliant andmeet requirements of CaliforniaTitle 24.

Advanced task lights are fitted withballast and lamp compliant withLEED requirements.

Knoll Office Tables

182

Privacy screens for desksupholstered

description w d h pattern no. 10 15 20 30 35 40 45 50 55

Upholstered privacy screens to 39�H 36� 13/8� 18� AZ1 1836F ( )( ) $456. $473. $487. $518. $535. $551. $565. $598. $635.42� 13/8� 18� AZ1 1842F ( )( ) 480. 497. 516. 553. 569. 591. 607. 640. 678.48� 13/8� 18� AZ1 1848F ( )( ) 503. 525. 545. 588. 607. 627. 651. 682. 721.60� 13/8� 18� AZ1 1860F ( )( ) 603. 627. 655. 708. 734. 761. 787. 829. 882.72� 13/8� 18� AZ1 1872F ( )( ) n/a 713. n/a n/a n/a n/a n/a n/a n/a

Upholstered privacy screens to 48�H 36� 13/8� 27� AZ1 2736F ( )( ) 568. 591. 609. 650. 669. 688. 708. 753. 794.42� 13/8� 27� AZ1 2742F ( )( ) 603. 622. 653. 691. 714. 738. 761. 803. 837.48� 13/8� 27� AZ1 2748F ( )( ) 627. 655. 682. 734. 761. 787. 812. 855. 885.60� 13/8� 27� AZ1 2760F ( )( ) 753. 787. 821. 885. 919. 949. 983. 1,036. 1,102.72� 13/8� 27� AZ1 2772F ( )( ) n/a 891. n/a n/a n/a n/a n/a n/a n/a

Order Code

Example: AZ1 1848 F15 117

AZ1 Privacy screen18 Height48 WidthF Surface15 Fabric group117 Bracket finish


Privacy screen surface types:H Perforated (9� only)

Specify finish:F Tackable fabric (18� or

27�H)

Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4045 Fabric group 4550 Fabric group 5055 Fabric group 55

Edges of privacy screens are trimgrey.

Application Notes

Privacy screens plug intocorresponding width service beamat back edge of desks andcredenzas.

Screens to 30�H are painted finish,perforated steel, to conceal cableclutter from desktop equipment toservice beam. Higher screens aretackable/acoustical upholsteredsurface on both sides.

Screens include brackets to mountto desk with service beam ofcorresponding width. Two 36�Wscreens may be specified for 72�Wdesks.

One 48�W screen can also beplanned at either end of 72� straightor corner beam.

Screens may be shared betweendesks in back-to-backconfigurations.

Knoll Office Tables

183

Cur

rent

s

Privacy screens for desksconnectors

description width depth height pattern number list price

Straight privacy screen connectors – – – AZ1 CS $28.

Corner privacy screen connectors 1� – 18� AZ1 CL18 ( ) 53.1� – 27� AZ1 CL27 ( ) 66.1� – 36� AZ1 CL36 ( ) 79.

Order Code

Example: AZ1 U0948T 117

AZ1 Privacy screenU Window09 Height48 WidthT Surface finish117 Frame finish


Specify painted finish for cornerconnectors.

Application Notes

Screen connectors align adjacentscreens in clusters of desks. Cornerconnectors include vertical trim tofill corner.

Specify two corner connectors for athree-way T-connection.

Specify three corner connectors fora four-way X-connection

Knoll Office Tables

184

Power, data and communications components for desks2 + 2 Racewayoutlet module, linking bracket, jumper cable

description type w pattern no. paint

Outlet module for desk service beam 2 outlets 12� AR1 DEM2 ( ) $255.4 outlets 24� AR1 DEM4 ( ) 342.

Desk-to-desk linking bracket AA1DD( ) 49.

Desk to wall linking bracket AA1DW( ) 172.

Jumper cable 12� wall/36� desk 37� AR1 EJ1 85.24� wall/48� desk 49� AR1 EJ2 113.36� wall/60� desk 61� AR1 EJ3 129.48� wall/72� desk 73� AR1 EJ4 141.60� wall/84� desk 85� AR1 EJ5 157.72� wall/96� desk 97� AR1 EJ6 172.108� desk 109� AR1 EJ7 185.96� wall/120� desk 121� AR1 EJ8 199.120� wall/144� desk 145� AR1 EJ10 227.

Order Code

Example: AR1 EJ5

AR1 RacewayE 2+2, eight wireJ Jumpers5 Width


Raceway components distribute four20-amp circuits in desk servicebeams: two convenience circuitsand two protected circuits withheavy grounds and heavy-duty #10neutrals.

For outlet module specify paintfinish.

Application Notes

Knoll 2+2, four circuit powercomponents mount in desk beams.Powered desks must be specifiedwith glides (not casters) and linkingbrackets.

Desk outlet module mounts incenter of beam, in lower tray.Module accepts two or four duplexoutlets plus two jumper cables ateach end. Duplex outlets snap intooutlet modules. Four outlet modulefits nominal beam lengths of 60� orlarger.

Desk-to-desk linking bracket linksany beam ends or corners, universalfor all joint conditions. Desk-to-walllinking bracket connects betweenwall attachment zone and beam endor corner.

Jumper cables connect power fromoutlet module to outlet module.Specify actual length between outletmodules.

Knoll Office Tables

185

Cur

rent

s

Power, data and communications components for desks2 + 2 Racewayoutlets, infeeds, cord tray

description type w d h pattern no. black

orange (-0)or orange

triangle (-T) black/orange paint

Duplex outlet Circuit A AR1 DA $36.Circuit B AR1 DB 36.Circuit X AR1 DX 36. 41.Circuit Y AR1 DY 36. 41.

Power infeeds Hardwire infeed AR1 DEHI( ) 285.Modular infeed AR1 DEPI 214.

Auxiliary cord tray 20� 2� 6� AR1 CB 124.

Order Code

Example: AR1 DEPI

AR1 RacewayDEPI Infeed type


Raceway components distribute four20-amp circuits in desk servicebeams: two convenience circuitsand two protected circuits withheavy grounds and heavy-duty #10neutrals.


For stanchion outlet specify:N All black outlet facesNO Black A/B and orange X/Y

Application Notes

Modular infeed is 7� liquidtightflexible conduit with pigtails on oneend and modular jumper plug onother end. Hardwire infeed isfield-wirable junction box whichfastens to beam and has modularjumper and plug.

Auxiliary cord tray attaches beneathstiffener under desk orpanel-mounted worksurface toaccommodate transformers or abundle of cables. U.L. does notpermit outlet strip in auxiliary cordtray.

Knoll Office Tables

186

Power, data and communications components for desks3 + 3 Racewayoutlet, linking bracket, jumper cable

description type w d h pattern no. no finish/paint

Outlet module for desk service beam 36�, 42�, 48� beam 12� AR1 DTM2 ( ) $299.60�, 72�, 84� beam 24� AR1 DTM4 ( ) 392.

Desk to wall linking bracket AA1DW( ) 172.

Jumper cable 12� wall/36� desk 37� AR1 TJ1 99.24� wall/48� desk 49� AR1 TJ2 129.36� wall/60� desk 61� AR1 TJ3 157.48� wall/72� desk 73� AR1 TJ4 172.60� wall/84� desk 85� AR1 TJ5 185.72� wall/96� desk 97� AR1 TJ6 199.108� desk 109� AR1 TJ7 227.96� wall/120� desk 121� AR1 TJ8 227.120� wall/144� desk 145� AR1 TJ10 255.

Desk-to-desk linking bracket AA1DD( ) 49.

Order Code

Example: AR1 DTM4 117

AR1 RacewayDT 3+3, deskM Outlet module4 Four outlets117 Finish


Raceway components distribute four20-amp circuits in desk servicebeams: three convenience circuitsand three protected circuits withheavy grounds and heavy-duty #10neutrals.


For stanchion outlet specify:N Black outlet facesNO Black A/B and orange X/Y

Application Notes

Knoll 3+3, six circuit powercomponents mount in desk beams.Powered desks must be specifiedwith glides (not casters) and linkingbrackets.

Desk outlet module mounts incenter of beam, in lower tray.Module accepts two or four duplexoutlets plus two jumper cables ateach end. Duplex outlets snap intooutlet module. Four outlet modulefits nominal beam lengths of 60� orlarger.

Jumper cables connect power fromoutlet module to outlet module.Specify actual length between outletmodules.

Knoll Office Tables

187

Cur

rent

s

Power, data and communications components for desks3 + 3 Racewayoutlets, infeeds, cord tray

description type w d h pattern no. black

orange (-0)or orange

triangle (-T)black/orange

no finish/paint

Duplex outlet Circuit A AR1 DA $36.Circuit B AR1 DB 36.Circuit C AR1 DC 36.Circuit X AR1 DX 36. 41.Circuit Y AR1 DY 36. 41.Circuit Z AR1 DZ 36. 41.

Power infeeds Hardwire base infeed AR1 DTHI( ) 327.Modular infeed AR1 DTPI 243.

Auxiliary cord tray 20� 2� 6� AR1 CB 124.

Order Code

Example: AR1 DTPI

AR1 RacewayDTPI Infeed type


Raceway components distribute four20-amp circuits in desk servicebeams: three convenience circuitsand three protected circuits withheavy grounds and heavy-duty #10neutrals.


For stanchion outlet specify:N Black outlet facesNO Black A/B and orange X/Y

Application Notes

Modular infeed is 7� liquidtightflexible conduit with pigtails on oneend and modular jumper plug onother end. Hardwire infeed isfield-wirable junction box whichfastens to beam and has modularjumper end.

Auxiliary cord tray attaches beneathstiffener under desk orpanel-mounted worksurface toaccommodate transformers or abundle of cables. U.L. does notpermit outlet strip in auxiliary cordtray.

Knoll Office Tables

188

Worktablespersonal, tripod, wiper

description type w d h pattern no. lam.

Personal worktable Adjustable 36� 28� 24-30� AT1 P36A ( )( )( ) $1,311.Fixed height 36� 28� 28� AT1 P36F ( )( )( ) 1,114.

Tripod worktable Adjustable 36� 36� 24-30� AT1 TA ( )( ) 1,606.Fixed height (low) 36� 36� 26� AT1 TL ( )( )( ) 1,114.

Small wiper Adjustable 47� 30� 24-30� AT1 W24A ( )( )( ) 1,770.Fixed height 47� 30� 28� AT1 W24F ( )( )( ) 1,114.

Order Code

Example: AT1 W24F 117 117 C

AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters


F Fixed heightA Adjustable height

Specify top and base finish.

Veneer finishes for worktables areavailable through Custom ProductDevelopment.

Specify:C CastersG Glides

Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.

Application Notes

Worktables are independent, mobiletables designed for use with desks,credenzas and panel-mountedworksurfaces.

Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.

Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.

Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.

Wiper and half wiper tables havefour legs with integral wire-managerchannels.

Knoll Office Tables

189

Cur

rent

s

Worktablespersonal, tripod, wiper


Medium wiper Adjustable 54� 30� 24-30� AT1 W30A ( )( )( ) $1,834.Fixed height 54� 30� 28� AT1 W30F ( )( )( ) 1,179.

Half wiper end table

right

Left, adjustable 33� 36� 24-30� AT1 E24LA ( )( )( ) 1,770.Left, fixed height 33� 36� 28� AT1 E24LF ( )( )( ) 1,114.Right, adjustable 33� 36� 24-30� AT1 E24RA ( )( )( ) 1,770.Right, fixed height 33� 36� 28� AT1 E24RF ( )( )( ) 1,114.

Order Code

Example: AT1 W24F 117 117 C

AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters





Specify:C CastersG Glides

Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.

Application Notes


Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.

Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.

Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.

Wiper and half wiper tables havefour legs with integral wire-managerchannels.

Knoll Office Tables

190

Worktableshalf-round, large wiper, round


Half round worktable Adjustable 50� 28� 24-30� AT1 D50A ( )( )( ) $1,508.Fixed height 50� 28� 28� AT1 D50F ( )( )( ) 1,311.

Large half round worktable Adjustable 62� 30� 24-30� AT1 D62A ( )( )( ) 1,966.Fixed height 62� 30� 28� AT1 D62F ( )( )( ) 1,311.

Large wiper end table Adjustable 72� 32� 24-30� AT1 W50A ( )( )( ) 1,966.Fixed height 72� 32� 28� AT1 W50F ( )( )( ) 1,311.

Round worktable Adjustable 42� 24-30� AT1 R42A ( )( )( ) 1,834.Adjustable 48� 24-30� AT1 R48A ( )( )( ) 1,903.Fixed height 42� 28� AT1 R42F ( )( )( ) 1,179.Fixed height 48� 28� AT1 R48F ( )( )( ) 1,246.

Order Code

Example: AT1 D50F 117 117 C

AT1 TableD Shape50 DepthF Base type117 Desktop finish117 Base finishC Casters





Specify:

C CastersG Glides

Fixed height tables are 28�H.Adjustable height worktables adjust24�-30�H in one-inch increments.Glides adjust 13/4�. Worktable topedge is trim grey.

Application Notes


Half round worktable aligns withback-to-back 24�D Currents desksor worksurfaces plus a Currentsscreen or Knoll systems panelbetween. Large half round tablealigns with back-to-back 30�Ddesks or worksurfaces. Large wiperis shared conference extension forback-to-back 24�D desks. All tableshave center edge offset to clearpanel end trim.

Large half-round, round, and wipertables have four legs with integralwire-manager channels. Half roundworktable has center column,three-star base for clear knee spacesupport.

Knoll Office Tables

191

Cur

rent

s

Introduction to Upstart

Knoll Upstart is a collection of tables, screens,storage and services distribution components forcomputer-intensive, active, and open workenvironments.

Upstart plans as single-surface, L- or U-shapeworkstations, or freestanding worktables andstorage in combination with other systemsfurniture. Tables are available on casters or glidesand are adjustable in height.

Original Upstart tops have a plastic laminatesurface with a continuous T-mold edge. Thecorners of Original Upstart tops are rounded.Original Upstart legs are curved.

New Plannable Upstart tops have a plasticlaminate or Veneer surface with a T-mold edge onthe front and a thin edgeband on the sides andback. The corners of Plannable Upstart tops are90 degrees and allow two tables to meet at rightangles. Plannable Upstart legs are straight.

Complementary products include Currentsworkshelves, which clamp on to Upstart tables,mobile screens, linkable screens and ServiceWall, monitor supports and desktop accessories.Consult the Currents and KnollExtra price listsfor product details and pricing.

ScreensUpstart screens mount to the back edge ofOriginal Upstart tables to provide seated visualprivacy at a horizon of 39 or 48 inches. UpstartScreens are available in translucent or markersurface, and may be combined with magnet rail.

Plannable Upstart tables use Morrison Networkupholstered screens, which are available in avariety of sizes.

StorageStorage includes the Upstart tower, which housesbinders as well as suspended files and personalstorage.

Accessories

Flat BracketBracket joins 2-legged table to another Upstarttable at same height.

Cable TrayCable tray adds on to worksurface stiffener tocontrol cable bundles and power strips (wherepermitted by code).

Pencil DrawerPencil drawer attaches to the underside of aworksurface at any location.

Important Note: Plannable Upstart straightlegs may not be used with Original Upstarttops due to stability issues.

Primary and Secondary Worksurfaces

Original Upstart

Rectangular table desk/Return

Corner table desk, 120°

Extended Corner table desk

Y-shape table desk, M-shape table desk

Conference Worksurfaces

Original Upstart

Round, Half round table desk

Oval table desk

Wiper table desk, Tripod table

48 x 24 Original Upstart

221/4�

48�

New Plannable Upstart

Rectangular table desk/Return

Corner table desk, 90°

Extended Corner table desk

P-shape table desk

New Plannable Upstart

Half round table desk

48 x 24 Plannable Upstart

235/8�

48�

Knoll Office Tables

192

Original Upstart Planning Examples

Basic stand-alone Y desk

• the core Upstart application• 30� x 72� nominal shown;

conference depth isapproximately 36�

Y desk with 42� round table

• conference table

Y desk with tripod table

• 30� x 72� Y desk, work shelf,and mobile pedestal

Dual-monitor M desk with tripod table

• 30� x 72� nominal M desk

Oval table with Y desk

• 36� x 66� oval table• 30� x 72� Y return

Rectangular table withbracketed return surface

• 72� x 76� approximatefootprint

• optional work shelf

Dual-monitor M deskworkstation

• 72� x 100� approximatefootprint

• optional work shelf• flat ends allow placement

along wall

Curved wiper with Y desk

• wiper 66� W• 30� x 72� Y return

Y and M back-to-back, with42� conference tables

Y desks back-to-back, withhalf-round shared table

• please note 1.75� setbackfrom the back edge ofeach top to module line,same as Currents desks.

Knoll Office Tables

193

Ups

tart

Original Upstart Planning Examples

Y desk with Upstart storage• 72� x 96� footprint• 72� table with screen• mobile pedestal and tower

Extended corner desk and adjacent worktable• 72� x 96� footprint• 72� x 48� corner and 48� straight desks• mobile pedestal and privacy screen

U-shape plannable desks• 96� x 96� footprint• two 48� x 72� extended corners• mobile pedestal and tower• 72� privacy screen

Extended corner desk and tower• 72� x 72� footprint• 48� and 72� screens• mobile pedestal and tower

Upstart 120 planning• group of three 120° corners• 48� shared privacy screens• mobile pedestals

Upstart work group• 120° corners and shared worktable 48 x 24�• mobile pedestals and towers• 48� privacy screens

Knoll Office Tables

194

Knoll Color ProgramUpstart Finishes

Core finishes

Specify Core finishes for all new customers

Core Legacy

Table legs,screen

brackets,magnet rail

UpstartWork-

surfaces

PlannableUpstartWork-

surfaces

UpstartWork-

surfaceedges

PlannableUpstartWork-

surfaceedges

Tower topand

bottom Tower door611 Beige Mist Metallic • • •118 Bright White • • • • • • •112 Brown • • •123 Brushed Grey • •122 Brushed Sand • •113 Dark Grey Y3 • • •128 Fog • • • •114 Folkstone Grey LA/U • • • • • • •111 Jet Black • • • • • • •124 Medium Cherry • •115 Medium Grey Y2 • • •612 Medium Metallic Grey J • • •121 Micro Grey • •129 Micro Sand • •126 Natural Cherry • •125 Natural Maple • •119 Pumice F • • • •116 Sandstone • • •613 Silver 3 • • •117 Soft Grey E/M42 • • • • • • •813 Trim grey 5 • •127 Walnut • •

Translucent orange O •Translucent blue P •Frosty white W •Light grey (integral) U

Glider grey (integral) G1

Y821 Maple Techgrain� 4/M • C6J2

Y831 Cherry Techgrain� 6/R • C6J3

C6F3 Med. brown mahoganyTechgrain� 7/I • C6J4

C6F4 Med. red mahogany Techgrain� 8/C • C6J5

C6F5 American cherry Techgrain� 9/P • C6J6

V316 Maple K V316

C6F6 American cherry X C6F6

C6F7 Medium red mahogany Z C6F7

Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersNatural anodized aluminum: Tower postsScreen available in Ribbed Polycarbonate or Marker surface

Veneer finishes for Plannable Upstart worksurfaces and for the Upstart tower are available through Custom Product Development.

For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.

Knoll Office Tables

195

Ups

tart

Upstart Legacy Finishes

Specify Legacy Finishes for existing customers only. Legacy Finishes are not available for new customers.

Table legs,screen

brackets,magnet rail

Work-surfaces and

shelvesWork- surface

edges CartTower top and

bottom Tower doorB Snow •L Light grey • •E Fiber •V Winter grey •S Slate •F Pumice • •U Folkstone grey • •

M42 Soft grey • •D Sand • •

CM Clear Maple •PA Pearwood •

WM Warm Cherry •5 Trim grey •N Black •O Translucent orange •P Translucent blue •W Frosty white •N2 Flint • •NU Light grey • •NJ Medium grey • •NV Dark grey • •NW Light Tan • •NH Beige • •3 Silver • • •B White • • •2 Metallic flint •U Light metallic grey •J Medium metallic grey •V Dark metallic grey •H Metallic beige •W Light metallic tan •E Soft grey •M Maple Techgrain� •R Cherry Techgrain� •C Med. red mahogany Techgrain� •P American cherry Techgrain� •K Maple •X American cherry •Z Medium red mahogany •U Light grey (integral) •G1 Glider grey (integral) •

Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersNatural anodized aluminum: Tower postsScreen available in Ribbed Polycarbonate or Marker surface

For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.

NOTE: Add 10% to the list price of any laminate product when specifying a legacy laminate.

Knoll Office Tables

196

Upstart Tablesprimary worksurfacestable desks

type application w d h pattern no. list price

Y-shape table desk, curved end (left hand shown) left 72� 28-36� 25-30� AUP Y72DCL4 ( )( )( )( ) $852.right 72� 28-36� 25-30� AUP Y72DCR4 ( )( )( )( ) 852.

M-shape table desk, curved ends 72� 30-36� 25-30� AUP M72DC4 ( )( )( )( ) 852.

Y-shape table desk, flat ends left 72� 28-36� 25-30� AUP Y72DFL4 ( )( )( )( ) 852.right 72� 28-36� 25-30� AUP Y72DFR4 ( )( )( )( ) 852.

M-shape table desk, flat ends 72� 31-36� 25-30� AUP M72DF4 ( )( )( )( ) 852.

Order Code

Example: AUP Y72DCL4 117 117117 G

A CurrentsUP UpstartY Table shape72 WidthD DepthC Curved endL Left hand4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides


Specify top, edge and leg finishes.

Casters/glidesC CastersG Glides

Upstart Y and M shape tablesinclude a worksurface stiffener thatdoubles as a horizontal cablemanager.

Application Notes

Upstart Y and M shape tablescombine computer support andadjacent work area in a basic tabledesk.

Curved end tops facilitateconferencing in open planning. Flatends plan close to system panels.Overall width is the same for curvedand flat end tops.

Upstart tops have plastic laminatesurface with continuous T-moldedge.

Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.

Adjustment range enables Upstarttables to overlap or slide underadjacent tables and worksurfaces.

Knoll Office Tables

197

Ups

tart

Upstart Tablesprimary worksurfacescorner table desks

type w d h pattern no. list price

Extended corner table desk, 90° extended left 72� 48� 25-30� AUP C7248S5 ( )( )( )( ) $974.

Extended corner table desk, 90° extended right 48� 72� 25-30� AUP C4872S5 ( )( )( )( ) 974.

Corner table desk, 120° 48�, 48� 22� 25-30� AUP V48S5 ( )( )( )( ) 913.

Order Code

Example: AUP C7248S5 117 117117 C

A CurrentsUP UpstartC Table shape72 Width, extended left48 WidthS Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters




Upstart extended corner and cornershape tables include worksurfacestiffeners that double as horizontalcable managers.

Application Notes

Upstart extended corner and cornershape tables combine computersupport and adjacent work area in abasic table desk.


Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.

Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.

Extended corner table desks and120° corner table desk are 22� deepon each side edge. Each back edgeof 120° corner desk corresponds to48� wide Currents linkable screensconnected at a 120° angle.

Knoll Office Tables

198

Upstart Tablessecondary worksurfaces


Rectangular table desk, four legs 48� 22� 25-30� AUP S48S4 ( )( )( )( ) $547.48� 28� 25-30� AUP S48D4 ( )( )( )( ) 609.60� 28� 25-30� AUP S60D4 ( )( )( )( ) 670.72� 28� 25-30� AUP S72D4 ( )( )( )( ) 700.72� 36� 25-30� AUP S72E4 ( )( )( )( ) 731.

Rectangular return, two legs 48� 22� 25-30� AUP S48S2 ( )( )( )G 426.

Order Code

Example: AUP S72E4 117 117 117C

A CurrentsUP UpstartS Table shape72 WidthE Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters



Casters/glides

C CastersG Glides

Upstart rectangular and rectangularreturn include a worksurfacestiffener that doubles as a horizontalcable manager.

Application Notes


Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.

Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.

Rectangular return with two legsincludes flat bracket for attachmentto primary worksurface at rightangle.

Knoll Office Tables

199

Ups

tart

Upstart Tablesconference worksurfaces


Wiper table desk 61� 321/2� 25-30� AUP W60D4 ( )( )( )( ) $670.

Oval table desk, four legs 66� 36� 25-30� AUP O664 ( )( )( )( ) 852.

Round table desk, four legs 42� 25-30� AUP R424 ( )( )( )( ) 634.

Half round table desk, four legs 62� 30� 25-30� AUP D624( )( )( )( ) 670.

Tripod table, three legs 36� 36� 25-30� AUP T363( )( )( )( ) 547.

Order Code

Example: AUP O664 117 117 117G

A CurrentsUP UpstartO Table shape66 Size4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides




Upstart wiper, oval and half roundtables include a worksurfacestiffener that doubles as a horizontalcable manager.

Application Notes

Upstart conference table desks aredesigned to support conferencework in combination with otherworktables or systems furniture.


Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.

Tops adjust in height to permitconference tops to overlap or rollunder adjacent tables.

Half round corresponds toback-to-back Y-shape tables or 30�deep straight tables.

Knoll Office Tables

200

Upstart Tablescurved leg only

description h pattern no. Paint

Curved leg with glide 237/8� - 287/8� AUPCGV ( ) $88.

Curved leg with caster 257/8� - 297/8� AUPCCV ( ) 88.

Order Code

Example: AUPCC 114

A CurrentsUP UpstartC Curved legC Casters114 Leg finish


Specify:


Leg finishes, paintSee Color Program Page

Application Notes

Each curved Upstart leg comes withfour (4) metal inserts and four (4)screws.

Curved Upstart legs must bepositioned in accordance withBIFMA guidelines.

Upstart tables have four or fivecurved legs with 5� adjustableleveler glides or 4� adjustablecasters. Adjustment range is 27� -31� for casters and 25� - 30� forglides.

Knoll Office Tables

201

Ups

tart

Plannable Upstart TablesRectangular Table Desk

description w d h pattern no. lam.

24� D 30� 235/8� 273/4� - 323/4� AUPM S30S4 ( ) G ( )( )( ) $437.36� 235/8� 273/4� - 323/4� AUPM S36S4 ( ) G ( )( )( ) 460.42� 235/8� 273/4� - 323/4� AUPM S42S4 ( ) G ( )( )( ) 487.48� 235/8� 273/4� - 323/4� AUPM S48S4 ( ) G ( )( )( ) 511.54� 235/8� 273/4� - 323/4� AUPM S54S4 ( ) G ( )( )( ) 535.60� 235/8� 273/4� - 323/4� AUPM S60S4 ( ) G ( )( )( ) 560.66� 235/8� 273/4� - 323/4� AUPM S66S4 ( ) G ( )( )( ) 586.72� 235/8� 273/4� - 323/4� AUPM S72S4 ( ) G ( )( )( ) 611.84� 235/8� 273/4� - 323/4� AUPM S84S4 ( ) G ( )( )( ) 660.

30� D 30� 295/8� 273/4� - 323/4� AUPM S30D4 ( ) G ( )( )( ) 493.36� 295/8� 273/4� - 323/4� AUPM S36D4 ( ) G ( )( )( ) 519.42� 295/8� 273/4� - 323/4� AUPM S42D4 ( ) G ( )( )( ) 544.48� 295/8� 273/4� - 323/4� AUPM S48D4 ( ) ( ) ( )( )( ) 568.54� 295/8� 273/4� - 323/4� AUPM S54D4 ( ) ( ) ( )( )( ) 598.60� 295/8� 273/4� - 323/4� AUPM S60D4 ( ) ( ) ( )( )( ) 624.66� 295/8� 273/4� - 323/4� AUPM S66D4 ( ) ( ) ( )( )( ) 638.72� 295/8� 273/4� - 323/4� AUPM S72D4 ( ) ( ) ( )( )( ) 652.84� 295/8� 273/4� - 323/4� AUPM S84D4 ( ) ( ) ( )( )( ) 726.

Order Code

Example: AUPM S72S4 AG 118114 114

A CurrentsUP UpstartM PlannableS Table Shape72 WidthS Depth4 Leg quantityA GrommetG Glides118 Top finish114 Edge finish114 Leg finish


Specify:

Grommet/No grommetA GrommetB No grommet


Top finish, plastic laminatesSee Color Program Page

Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.

Edge finishes, T-moldSee Color Program Page


24� deep rectangular table deskscan only be ordered with glides.30� deep rectangular table desks in30�, 36� and 42� width can only beordered with glides.

For Veneer Group 1, only black ortrim grey edgebands can bespecified.

Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.

Application Notes

Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.

Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.

Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.

Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.

Knoll Office Tables

202

Plannable Upstart TablesRectangular Return


24� D 36� 235/8� 273/4� - 323/4� AUPM S36S2 ( )( )( )( )( ) $347.42� 235/8� 273/4� - 323/4� AUPM S42S2 ( )( )( )( )( ) 374.48� 235/8� 273/4� - 323/4� AUPM S48S2 ( )( )( )( )( ) 397.60� 235/8� 273/4� - 323/4� AUPM S60S2 ( )( )( )( )( ) 480.

Order Code

Example: AUPM S36S2 AC 118114 114

A CurrentsUP UpstartM PlannableS Table Shape36 WidthS Depth2 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish


Specify:









Application Notes




Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.

Knoll Office Tables

203

Ups

tart

Plannable Upstart Tablescorner


24� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242S5 ( )( )( )( )( ) $747.48� 48� 273/4� - 323/4� AUPM C4848S5 ( )( )( )( )( ) 808.60� 60� 273/4� - 323/4� AUPM C6060S5 ( ) C ( )( )( ) 1,054.

30� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242D5 ( )( )( )( )( ) 789.48� 48� 273/4� - 323/4� AUPM C4848D5 ( )( )( )( )( ) 850.60� 60� 273/4� - 323/4� AUPM C6060D5 ( ) C ( )( )( ) 1,096.

Order Code

Example: AUPM C4242S5 AC 118114 114

A CurrentsUP UpstartM PlannableC Table Shape4242 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish


Specify:









Application Notes




Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.

Knoll Office Tables

204

Plannable Upstart Tablesextended cornerextended left


24� D both sides corner worksurface,extended left

60� 36� 273/4� - 323/4� AUPM C6036S5 ( )( )( )( )( ) $661.60� 42� 273/4� - 323/4� AUPM C6042S5 ( )( )( )( )( ) 722.60� 48� 273/4� - 323/4� AUPM C6048S5 ( ) C ( )( )( ) 784.72� 36� 273/4� - 323/4� AUPM C7236S5 ( )( )( )( )( ) 784.72� 42� 273/4� - 323/4� AUPM C7242S5 ( ) C ( )( )( ) 846.72� 48� 273/4� - 323/4� AUPM C7248S5 ( ) C ( )( )( ) 907.84� 48� 273/4� - 323/4� AUPM C8448S5 ( ) C ( )( )( ) 1,029.

30� D both sides corner worksurface,extended left

60� 48� 273/4� - 323/4� AUPM C6048D5 ( ) C ( )( )( ) 847.72� 48� 273/4� - 323/4� AUPM C7248D5 ( ) C ( )( )( ) 968.84� 48� 273/4� - 323/4� AUPM C8448D5 ( ) C ( )( )( ) 1,092.

30� D left/24� D right corner worksurface,extended left

60� 42� 273/4� - 323/4� AUPM C6042L5 ( ) C ( )( )( ) 784.60� 48� 273/4� - 323/4� AUPM C6048L5 ( ) C ( )( )( ) 847.72� 42� 273/4� - 323/4� AUPM C7242L5 ( ) C ( )( )( ) 907.72� 48� 273/4� - 323/4� AUPM C7248L5 ( ) C ( )( )( ) 968.84� 48� 273/4� - 323/4� AUPM C8448L5 ( ) C ( )( )( ) 1,092.

Order Code




Specify:









Application Notes





Knoll Office Tables

205

Ups

tart

Plannable Upstart Tablesextended cornerextended left


24� D left/30� D right corner worksurface,extended left

60� 42� 273/4� - 323/4� AUPM C6042R5 ( ) C ( )( )( ) $784.60� 48� 273/4� - 323/4� AUPM C6048R5 ( ) C ( )( )( ) 847.72� 42� 273/4� - 323/4� AUPM C7242R5 ( ) C ( )( )( ) 907.72� 48� 273/4� - 323/4� AUPM C7248R5 ( ) C ( )( )( ) 968.84� 48� 273/4� - 323/4� AUPM C8448R5 ( ) C ( )( )( ) 1,092.

Order Code




Specify:









Application Notes





Knoll Office Tables

206

Plannable Upstart Tablesextended cornerextended right


24� D both sides corner worksurface,extended right

36� 60� 273/4� - 323/4� AUPM C3660S5 ( )( )( )( )( ) $661.36� 72� 273/4� - 323/4� AUPM C3672S5 ( )( )( )( )( ) 784.42� 60� 273/4� - 323/4� AUPM C4260S5 ( )( )( )( )( ) 722.42� 72� 273/4� - 323/4� AUPM C4272S5 ( ) C ( )( )( ) 846.48� 60� 273/4� - 323/4� AUPM C4860S5 ( ) C ( )( )( ) 784.48� 72� 273/4� - 323/4� AUPM C4872S5 ( ) C ( )( )( ) 907.48� 84� 273/4� - 323/4� AUPM C4884S5 ( ) C ( )( )( ) 1,029.

30� D both sides corner worksurface,extended right

48� 60� 273/4� - 323/4� AUPM C4860D5 ( ) C ( )( )( ) 847.48� 72� 273/4� - 323/4� AUPM C4872D5 ( ) C ( )( )( ) 968.48� 84� 273/4� - 323/4� AUPM C4884D5 ( ) C ( )( )( ) 1,092.

24� D left/30� D right corner worksurface,extended right

42� 60� 273/4� - 323/4� AUPM C4260R5 ( ) C ( )( )( ) 784.42� 72� 273/4� - 323/4� AUPM C4272R5 ( ) C ( )( )( ) 907.48� 60� 273/4� - 323/4� AUPM C4860R5 ( ) C ( )( )( ) 847.48� 72� 273/4� - 323/4� AUPM C4872R5 ( ) C ( )( )( ) 968.48� 84� 273/4� - 323/4� AUPM C4884R5 ( ) C ( )( )( ) 1,092.

Order Code




Specify:









Application Notes





Knoll Office Tables

207

Ups

tart

Plannable Upstart Tablesextended cornerextended right


30� D left/24� D right corner worksurface,extended right

42� 60� 273/4� - 323/4� AUPM C4260L5 ( ) C ( )( )( ) $784.42� 72� 273/4� - 323/4� AUPM C4272L5 ( ) C ( )( )( ) 907.48� 60� 273/4� - 323/4� AUPM C4860L5 ( ) C ( )( )( ) 847.48� 72� 273/4� - 323/4� AUPM C4872L5 ( ) C ( )( )( ) 968.48� 84� 273/4�- 323/4� AUPM C4884L5 ( ) C ( )( )( ) 1,092.

Order Code




Specify:









Application Notes





Knoll Office Tables

208

Plannable Upstart Tableshalf round and P-shapes


Half round table desk, four legs 59� 30� 273/4� - 323/4� AUPM D594 ( ) G ( )( )( ) $624.60� 30� 273/4� - 323/4� AUPM D604 ( ) G ( )( )( ) 624.

P-shape surface, extended right 48� 75� 273/4� - 323/4� AUPM P4875S5 ( ) C ( )( )( ) 1,042.

P-shape surface, extended left 75� 48� 273/4� - 323/4� AUPM P7548S5 ( ) C ( )( )( ) 1,042.

Order Code

Example: AUPM P4875S5 AC 118114 114

A CurrentsUP UpstartM PlannableP Table Shape4875 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish


Specify:









Application Notes




Plannable Upstart half round andP-shape tables include worksurfacestiffeners that double as horizontalcable managers.

Knoll Office Tables

209

Ups

tart

Plannable Upstart Tablesstraight leg only

description h pattern no. Paint

Straight leg with glide 265/8� - 315/8� AUPM SGV ( ) $88.

Straight leg with caster 265/8� - 305/8� AUPM SCV ( ) 88.

Order Code

Example: AUPM SC 114

A CurrentsUP UpstartM PlannableS Straight legC Casters114 Leg finish


Specify:



Plannable Upstart straight legmay not be used with OriginalUpstart tables due to stabilityissues.

Application Notes

Each straight Plannable Upstart legcomes with four (4) metal insertsand four (4) screws.

Straight Plannable Upstart legsmust be positioned in accordancewith BIFMA guidelines.


Knoll Office Tables

210

Accessories


Flat bracket 31/2� 14� AB1 F24 $31.

Cable tray 20� 2� 6� AR1 CB 124.

Carpet grips (set of 10) MM2-CG 19.

Non skid grips (set of 10) AA1NSK 32.

Pencil drawer 12� 151/8� 3� AUP PDU 110.

Lockable caster (set of 4) 2� 2� 21/4� AUPLC4 40.

Lockable caster (set of 5) 2� 2� 21/4� AUPLC5 50.

Order Code

Example: AA1-NSK

A CurrentsA1 AccessoryNSK Non skid grips


Flat bracket and cable tray areblack, painted steel.

Pencil drawer is integral color, lightgrey.

Application Notes

Flat bracket attaches returnworksurface to primary worksurfaceat right angle.

Cable tray attaches beneathstiffener under table surface toaccommodate transformers or abundle of cable.

Carpet grips snap into underside ofUpstart leveling glides for tractionon carpeted floors.

Non-skid grips snap intoleveling glides for traction onhard-surface floors.

Pencil drawer attaches to theunderside of a worksurface at anylocation.

Locking casters replace standardnon-locking casters.

Knoll Office Tables

211

Ups

tart

Upstart Privacy Screensfor Upstart tables

type application w d h pattern no. list price

Polycarbonate screen, back of table 36� 3/4� 24� AUP B3624RC ( ) $438.48� 3/4� 24� AUP B4824RC ( ) 499.60� 3/4� 24� AUP B6024RC ( ) 576.72� 3/4� 24� AUP B7224RC ( ) 628.

Marker surface screen, back of table 36� 3/4� 24� AUP B3624M ( ) 438.48� 3/4� 24� AUP B4824M ( ) 499.60� 3/4� 24� AUP B6024M ( ) 576.72� 3/4� 24� AUP B7224M ( ) 628.

Magnet rail 36� screen 18� 1/4� 2� AUP MR36 ( ) 50.48� screen 30� 1/4� 2� AUP MR48 ( ) 58.60� screen 36� 1/4� 2� AUP MR60 ( ) 63.72� screen 48� 1/4� 2� AUP MR72 ( ) 68.

Order Code

Example: AUP B7224 RC 117

A CurrentsUP UpstartB Back of worksurface72 Width24 HeightRC Polycarbonate117 Paint finish


Specify surface type and paintedfinish for screen frame, bracketsand magnet rail.

Surface type:RC Ribbed polycarbonateM Marker Surface

Application Notes

Upstart screens mount on the backof Upstart tables to provide partialenclosure above and belowworksurface height.

Screens have a translucent, ribbedpolycarbonate or marker surfacecore. Perimeter frame is paintedsteel with trim grey molded cornerblocks.

Screens include brackets that mountto matching holes under Upstarttables of the same width. Bracketholes are also provided for mountingtwo 36� wide screens on a 72� wideUpstart table.

Screen mounts in two positions,creating enclosure to a height of 39�or 48� when the table top is adjustedto 28�.

Screens may be shared betweendesks in back to backconfigurations.

Magnet rails span between screenmounting brackets to hang paperdocuments.

Magnet rails correspond in width toprivacy screens.

Please refer to Introduction page fortable and screen dimensions.

Knoll Office Tables

212

Plannable Upstart Privacy Screensback screens

description type w d h pattern no. 10 15 20 30 40 45

Back of worksurface screens to 42�H 30� 3/4� 15� MZ1-B3015-( ) $197. $222. $228. $249. $281. $311.36� 3/4� 15� MZ1-B3615-( ) 236. 257. 264. 290. 319. 343.42� 3/4� 15� MZ1-B4215-( ) 290. 304. 313. 344. 375. 401.48� 3/4� 15� MZ1-B4815-( ) 325. 338. 348. 383. 428. 458.54� 3/4� 15� MZ1-B5415-( ) 380. 392. 402. 444. 485. 515.60� 3/4� 15� MZ1-B6015-( ) 418. 426. 441. 483. 540. 573.66� 3/4� 15� MZ1-B6615-( ) * 460. * * * *72� 3/4� 15� MZ1-B7215-( ) * 509. * * * *78� 3/4� 15� MZ1-B7815-( ) * 559. * * * *

Back of worksurface screens to overhead supportheight, 46�H

30� 3/4� 19� MZ1-B3019-( ) 250. 272. 281. 307. 336. 367.36� 3/4� 19� MZ1-B3619-( ) 309. 324. 333. 368. 393. 417.42� 3/4� 19� MZ1-B4219-( ) 366. 374. 382. 423. 467. 494.48� 3/4� 19� MZ1-B4819-( ) 416. 425. 435. 480. 554. 565.54� 3/4� 19� MZ1-B5419-( ) 473. 476. 492. 541. 581. 616.60� 3/4� 19� MZ1-B6019-( ) 509. 524. 540. 596. 633. 675.66� 3/4� 19� MZ1-B6619-( ) * 574. * * * *72� 3/4� 19� MZ1-B7219-( ) * 628. * * * *78� 3/4� 19� MZ1-B7819-( ) * 681. * * * *

Back of worksurface screens, to Reuter overheadsupport height, 49�H

30� 3/4� 22� MZ1-B3022-( ) 307. 322. 330. 367. 393. 418.36� 3/4� 22� MZ1-B3622-( ) 379. 392. 402. 443. 475. 492.42� 3/4� 22� MZ1-B4222-( ) 435. 443. 458. 504. 559. 586.48� 3/4� 22� MZ1-B4822-( ) 509. 510. 526. 582. 621. 676.54� 3/4� 22� MZ1-B5422-( ) 560. 561. 582. 644. 685. 722.60� 3/4� 22� MZ1-B6022-( ) 596. 624. 644. 710. 752. 779.66� 3/4� 22� MZ1-B6622-( ) * 694. * * * *72� 3/4� 22� MZ1-B7222-( ) * 744. * * * *78� 3/4� 22� MZ1-B7822-( ) * 802. * * * *

Order Code

Example: MZ1-B6619-15-W210/20

MZ1 Morrison Networkprivacy screen

B Back of worksurface66 Width19 Height15 Surface type and group

no.W210/20 Upholstery


Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.

* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.

Application Notes

Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 42�, 46�or 49�.

Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.

Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.

VDT worksurfaces will accept backscreens on only one back edge.

Back screens may not be used at theend of a straight worksurface; useend screens in this application.

Privacy screens are not available ina combination of fabrics.

Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 36� screens for a72� surface.

Between back-to-back straight orVDT worksurfaces specify asingle3/4� back screen. This allowsback-to-back 235/8�D or 295/8�Dworksurfaces to plan on a precise 6�module.

15� high screens are used for a 42�horizon.

19�H screens are used to fill inspace between worksurface andMorrison overhead.

22�H screens fill the space betweenworksurface and Reuter overhead.

All but shared end screens start atthe bottom of the worksurface.

Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.

For replacement screen stiffenerssee Accessories page.

Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.

Knoll Office Tables

213

Ups

tart

Plannable Upstart Privacy ScreensVDT screens

description type w d h pattern no. 10 15 20 30 40 45

Back of VDT screens To 42�H 355/8� 3/4� 15� MZ1-V3615-( ) $236. $257. $264. $281. $311. $343.415/8� 3/4� 15� MZ1-V4215-( ) 290. 304. 313. 336. 367. 401.475/8� 3/4� 15� MZ1-V4815-( ) 325. 338. 348. 375. 417. 458.595/8� 3/4� 15� MZ1-V6015-( ) 414. 428. 443. 474. 523. 568.715/8� 3/4� 15� MZ1-V7215-( ) * 516. * * * *

To 46�H 355/8� 3/4� 19� MZ1-V3619-( ) 312. 323. 333. 355. 381. 417.415/8� 3/4� 19� MZ1-V4219-( ) 366. 374. 382. 408. 458. 494.475/8� 3/4� 19� MZ1-V4819-( ) 416. 426. 441. 469. 510. 565.595/8� 3/4� 19� MZ1-V6019-( ) 520. 539. 558. 605. 670. 726.715/8� 3/4� 19� MZ1-V7219-( ) * 650. * * * *

To 49�H 355/8� 3/4� 22� MZ1-V3622-( ) 379. 392. 402. 430. 458. 492.415/8� 3/4� 22� MZ1-V4222-( ) 435. 443. 458. 480. 547. 586.475/8� 3/4� 22� MZ1-V4822-( ) 509. 512. 528. 561. 565. 676.595/8� 3/4� 22� MZ1-V6022-( ) 604. 627. 646. 703. 777. 843.715/8� 3/4� 22� MZ1-V7222-( ) * 752. * * * *

Order Code

Example: MZ1-V4822-15-W210/20

MZ1 Morrison Networkprivacy screen

V VDT48 Width22 Height15 Surface type and group

no.W210/20 Upholstery


Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

VDT worksurfaces will not acceptback screens on both back edges.Use VDT screens on at least oneback edge.

VDT screens are not in pairs;specify one for each back edge orone VDT screen and one backscreen.

* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.

Application Notes

Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.

15� high screens are used for a 42�horizon.

19�H screens are used to fill inspace between worksurface anddesk mounted Morrison Networkoverheads.

22�H screens fill the space betweenworksurface and desk mountedReuter overheads.

Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.

* Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.

Knoll Office Tables

214

Upstart Storagetower

type application description w d h pattern no. P1/P2 P3

Tower, left opening door active door, 1 file tub,4 CD tubs

casters 24� 25� 48� AUP T48E LCT ( )( ) $2,514. $2,861.glides 24� 25� 48� AUP T48E LGT ( )( ) 2,686. 3,034.

active door, 3 file tubs,1 CD tub

casters 24� 25� 48� AUP T48A LCT ( )( ) 2,514. 2,861.glides 24� 25� 48� AUP T48A LGT ( )( ) 2,686. 3,034.

Tower, right opening door active door, 1 file tub,4 CD tubs

casters 24� 25� 48� AUP T48E RCT ( )( ) 2,514. 2,861.glides 24� 25� 48� AUP T48E RGT ( )( ) 2,686. 3,034.

active door, 3 file tubs,1 CD tub

casters 24� 25� 48� AUP T48A RCT ( )( ) 2,514. 2,861.glides 24� 25� 48� AUP T48A RGT ( )( ) 2,686. 3,034.

Shelf Insert 201/2� 141/2� 3/4� AUPTS 148.

Order Code

Example: AUP T48A LCT 117 117

A CurrentsUP UpstartT Tower48 HeightA Door configurationL LeftC CastersT Side panels117 Top and base finish117 door finish


Specify:

Door configuration:A Active door, 3 files, 1 CDE Active door, 1 file, 4 CD

Specify:L Left hingeR Right hinge

C CastersG Glides

Specify top and base finish and doorfinish.

Veneer finishes are availablethrough Custom ProductDevelopment.

Bright White (118) and Silver (613)are P3 paint finishes.

Application Notes

Upstart tower provides shelf, file,CD and personal storage in acompact, luminous enclosure.

Towers include painted finish topand bottom, two shelves, moldedtranslucent side and back panels,clear satin anodized aluminumposts, and hinged door with lock.Doors may be specified with paintedor veneer finish.

Side panels support adjustableshelves on a 3� grid.

Active door includes tilting bins for5� deep, letter or legal files and CDsor personal items.

Upstart towers are designed forrapid assembly on site.

Knoll Office Tables

215

Ups

tart

Equity finishes

Core finishes

Laminates

111 Jet Black114 Folkstone Grey

(was LA)117 Soft Grey (was M42)118 Bright White119 Pumice (was LF)121 Micro Grey122 Brushed Sand123 Brushed Grey124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog129 Micro Sand

Worksurface Edge

111 Jet Black113 Dark Grey (was Y3)114 Folkstone Grey

(was LA)115 Medium Grey (was Y2)117 Soft Grey (was E)118 Bright White119 Pumice (was LF)124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog

Knoll Color Program Painted TrimEP3 Panelsall other painted components

P1 Finishes

111 Jet Black112 Brown113 Dark Grey (was Y3)114 Folkstone Grey

(was LA)115 Med. Grey (was Y2)116 Sandstone117 Soft Grey (was E)

P2 Finishes

611 Beige Mist Metallic612 Medium Metallic Grey

P3 Finishes

118 Bright White613 Silver (was 3)

Insert Optionsfor insert panels, stack-on panels andadd-on screens.

Plexiglass

CL ClearIC IceSM SmokedTR Translucent

Lumasite (stack-on panels andadd-on screens only)

LF Frost

Knoll Office Tables

216

Tables

description surface type w d h pattern no. P1 P2 P3

round table Laminate 293/4� 293/4� 29� ET1RT30 $660. $694. $726.353/4� 353/4� 29� ET1RT36 708. 741. 779.413/4� 413/4� 29� ET1RT42 942. 992. 1,037.

4 columns - 4 legs 593/4� 593/4� 29� ET1RT60 2,087. 2,193. 2,297.5 legs 473/4� 473/4� 29� ET1RT48 1,175. 1,233. 1,291.with casters 353/4� 353/4� 267/8� ET1RT36C 930. 979. 1,024.

square table Laminate 24� 24� 16� ET1ST2416 476. 500. 523.293/4� 293/4� 29� ET1ST30 630. 662. 694.353/4� 353/4� 29� ET1ST36 672. 706. 739.413/4� 413/4� 29� ET1ST42 897. 941. 986.

4 columns - 4 legs 591/2� 591/2� 29� ET1ST60 1,986. 2,086. 2,185.6 legs 473/4� 473/4� 29� ET1ST48 1,117. 1,172. 1,228.with casters 221/4� 221/4� 263/8� ET1ST22C 764. 801. 838.

rectangular table Laminate 473/4� 293/4� 29� ET1RCT3048 1,100. 1,155. 1,210.581/2� 351/2� 29� ET1RCT3660 1,586. 1,663. 1,744.593/4� 293/4� 29� ET1RCT3060 1,342. 1,410. 1,478.713/4� 293/4� 29� ET1RCT3072 1,586. 1,663. 1,744.713/4� 353/4� 29� ET1RCT3672 1,877. 1,970. 2,066.833/4� 413/4� 29� ET1RCT4284 2,512. 2,636. 2,762.

4 columns 953/4� 473/4� 29� ET1RCT4896 3,239. 3,401. 3,562.Accepts Equity drawers 691/4� 34� 29� ET1RCT3469 2,384. 2,502. 2,622.Accepts Equity drawers 791/4� 34� 29� ET1RCT3479 2,384. 2,502. 2,622.

Order Code

Example: ET1RCT3060, 117, 117,117

ET1RCT Rectangular table30 Depth60 Width117 Soft Grey laminate117 Soft Grey edge117 Soft Grey trim


Specify surface, trim and hardwaretrim color.

If a polished chrome base isdesired, add a ‘‘P’’ suffix and add$10 to the P1 list price.

Tables are only available in EW1profile.

Wood Grain and Metal edge bands:When specifying a top with a woodgrain edge band add $25 to thestandard list price.

When specifying a top with a metaledge band add $50 to the standardlist price.

Application Notes

Stretchers are used between two ormore hubs. Two column tables haveone stretcher; four column tablesuse four stretchers; and six columntables use seven.

ET1OT60144 top ships in twosections. Hidden fasteners joinsections.

Note: Add 10% to the list price ofany table when specifying alegacy laminate.

Knoll Office Tables

217

Equ

ity

Tables

description surface type w d h pattern no. P1 P2 P3

oval table Laminate 713/4� 353/4� 29� ET1OT3672 $2,480. $2,603. $2,728.4 columns 953/4� 47� 29� ET1OT4896 4,067. 4,274. 4,476.6 columns 1193/4� 47� 29� ET1OT48120 4,975. 5,223. 5,473.6 columns 1193/4� 533/4� 29� ET1OT54120 5,546. 5,823. 6,100.6 columns 1433/4� 593/4� 29� ET1OT60144 7,242. 7,603. 7,966.

Order Code

Example: ET1RCT3060, 117, 117,117

ET1RCT Rectangular table30 Depth60 Width117 Soft Grey laminate117 Soft Grey edge117 Soft Grey trim


Specify surface, trim and hardwaretrim color.

If a polished chrome base isdesired, add a ‘‘P’’ suffix and add$10 to the P1 list price.

Tables are only available in EW1profile.

Wood Grain and Metal edge bands:When specifying a top with a woodgrain edge band add $25 to thestandard list price.

When specifying a top with a metaledge band add $50 to the standardlist price.

Application Notes

Stretchers are used between two ormore hubs. Two column tables haveone stretcher; four column tablesuse four stretchers; and six columntables use seven.

ET1OT60144 top ships in twosections. Hidden fasteners joinsections.

Note: Add 10% to the list price ofany table when specifying alegacy laminate.

Knoll Office Tables

218

120°Table tops, worksurface legs and bases

description type application wreturndepth h pattern no.

standardedge

woodgrainedge

metaledge P1 P2 P3

Table tops 2mm edge diamond 54� 38� ET2DT54 $498. $547. $604.2mm edge large mushroom 44� 38� ET2MT44 503. 552. 597.2mm edge large triangle 50� 46� ET2TT50 545. 599. 654.2mm edge small mushroom 38� 33� ET2MT38 431. 476. 518.2mm edge small triangle 41� 38� ET2TT41 465. 512. 559.

Table legs Set of 3 2� legs w/caster 27� ET3LEG3C 398. 417. 431.Set of 3 2� legs w/glides 27� ET3LEG3G 395. 415. 429.Set of 4 2� legs w/casters 27� ET3LEG4C 505. 524. 538.Set of 4 2� legs w/glides 27� ET3LEG4G 501. 520. 534.

Column Bases Adjustable HeightSupport Column(26� to 30�)

EB1ACOL 305. 323. 336.

Order Code

Example: ET2DT54, 118, 118

ET2 Equity 120 w/s 2 mmedge

DT Diamond top54 Width118 Bright White laminage118 Bright White edge


For all tops, specify laminate andedge color. For cantilever, tablelegs, and column base, specify trimcolor.

Transition and peninsula topsrequire a column base for support.

120° worksurfaces are not availablewith woodgrain or brushedlaminates unless specified asspecial product.

Application Notes

Refer to the worksurface planningpage for worksurface drawings andapplications.

W7 straight ends are availableextended by adding an ‘‘E’’ to theend of the pattern number andadding $20.

W3 top may be extended on eitherthe left or right hand side by addingan ‘‘EL’’ or ‘‘ER’’ to the end of thepattern number and adding $20.

W3 top may be extended on bothends by adding an ‘‘EB’’ to the endof the pattern number and adding$40.

T2 transition top comes cut to fitagainst a postless end. If placingagainst and end with a post, add an‘‘N’’ to the end of the patternnumber so it is notched for the post.

Note: Add 10% to the list price ofany worksurface when specifyinga legacy laminate.

Knoll Office Tables

219

Equ

ity

Dividends Horizon Tables The design details of Dividends Horizon tables are consistent with the scale and visual language of the Dividends Horizon system. This design consistency makes Dividends Horizon tables appropriate for use in conference, meeting, private office and open plan office applications.

Dividends Horizon Y Leg tables are available in two versions:

Freestanding Y Leg Tables Freestanding Y Leg tables include a worksurface and base assembly. All freestanding table sizes are available with two Y legs and a horizontal stretcher connecting the two columns.

In addition, 24 and 30 inch deep tables are available without a stretcher. Tables without stretcher include an integral worksurface support plate. 36 and 42 inch deep tables are available only with a stretcher.

Available Sizes

Credenza Supported Y Leg Tables The unique Dividends Horizon Credenza Supported Y Leg tables are designed to be used in concert with Dividends Horizon low credenzas, specified separately.

Credenza Supported Tables include one Y Leg, credenza support spacer, and aworksurface with integral stiffening plate.

Note: Credenza supported tables may be used with laminate or veneer top credenzas only, and are not compatible with steel top credenzas.

Available Sizes

Optional Edge Grommet Edge grommets are optional and can be factory installed centered along the rear edge of rectangular or racetrack freestanding or credenza supported Y Leg tables.

Construction

- Material: 0.028 inch thick high pressure laminate or 0.6mm thick veneer on 1-1/8" particle board core - Edge: plastic laminate tops have a 2mm edgeband; Techwood tops have a 3/16 inch thick Techwood edge

- Stretcher: extruded aluminum - Stiffening plate: 4 inch deep 12 gauge steel plate (length varies) - Foot: die cast aluminum - Column: extruded aluminum with 3/16 inch thick structural plate - Credenza support spacer: 2-15/16 inches high x 9-5/8 inches wide x 1-9/16 inches deep steel box with a flat bracket on top

Note: Dividends Horizon tables are only available in Knoll Core paint, laminate, and Techwood finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.

Note: The stiffening plate on tables without a stretcher prevents the field installation of a grommet or plexus box. (see illustration below)

24" Deep Freestanding Racetrack Y Leg Table with Stretcher

24" Deep Credenza Supported Racetrack Y Leg Table

24" Deep Freestanding Racetrack Y Leg Table without Stretcher

Stiffening plate

Y Leg TablesFreestanding and Credenza SupportedSpecifications

Knoll Office Tables

220

Y Leg TablesFreestanding Rectangular Table Top24� and 30� Deep

description w * w d t h pattern no.

LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

24� Deep Rectangular with(2) Y-Legs, No Grommet

(with stretcher shown)

60� 5913/16� 231/2� 11/4� 281/2� DT1ARY6024NS $1,458. $1,604. $1,668. $1,670. $1,837. $1,911.66� 6513/16� 231/2� 11/4� 281/2� DT1ARY6624NS 1,474. 1,622. 1,686. 1,697. 1,868. 1,942.72� 7113/16� 231/2� 11/4� 281/2� DT1ARY7224NS 1,490. 1,639. 1,705. 1,725. 1,898. 1,974.78� 7713/16� 231/2� 11/4� 281/2� DT1ARY7824NS 1,506. 1,657. 1,723. 1,753. 1,929. 2,006.84� 8313/16� 231/2� 11/4� 281/2� DT1ARY8424NS 1,534. 1,687. 1,755. 1,781. 1,959. 2,038.90� 8913/16� 231/2� 11/4� 281/2� DT1ARY9024NS 1,561. 1,718. 1,786. 1,808. 1,990. 2,069.96� 9513/16� 231/2� 11/4� 281/2� DT1ARY9624NS 1,589. 1,748. 1,818. 1,836. 2,020. 2,101.



60� 5913/16� 291/2� 11/4� 281/2� DT1ARY6030NS 1,495. 1,645. 1,711. 1,706. 1,877. 1,952.66� 6513/16� 291/2� 11/4� 281/2� DT1ARY6630NS 1,516. 1,668. 1,735. 1,739. 1,912. 1,989.72� 7113/16� 291/2� 11/4� 281/2� DT1ARY7230NS 1,536. 1,690. 1,758. 1,771. 1,948. 2,026.78� 7713/16� 291/2� 11/4� 281/2� DT1ARY7830NS 1,557. 1,713. 1,782. 1,804. 1,984. 2,063.84� 8313/16� 291/2� 11/4� 281/2� DT1ARY8430NS 1,587. 1,746. 1,816. 1,836. 2,020. 2,101.90� 8913/16� 291/2� 11/4� 281/2� DT1ARY9030NS 1,616. 1,778. 1,849. 1,869. 2,055. 2,138.96� 9513/16� 291/2� 11/4� 281/2� DT1ARY9630NS 1,646. 1,811. 1,883. 1,901. 2,091. 2,175.

w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�

Ordering Information

Freestanding Y Leg Table:

1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish

Order Code


Example: DT1ARY6024NS, 114,114, 114

DT1 Dividends HorizonTable

A 2 Leg table assemblyR Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint

finish114 Laminate top finish114 Edgeband finish

Included with:


• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate

Note: Y Leg tables are finished withtextured paint, including 613 Silver.

Note: Y Leg Tables are onlyavailable in Knoll core finishes.

Options

Grommet Option:

• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.

Stretcher Option:

• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.

Knoll Office Tables

221

Div

iden

dsH

oriz

on

Y Leg TablesFreestanding Rectangular Table Top36� and 42� Deep


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint


60� 5913/16� 351/2� 11/4� 281/2� DT1ARY6036N $1,544. $1,698. $1,766. $1,782. $1,960. $2,038.66� 6513/16� 351/2� 11/4� 281/2� DT1ARY6636N 1,571. 1,728. 1,797. 1,817. 1,999. 2,078.72� 7113/16� 351/2� 11/4� 281/2� DT1ARY7236N 1,598. 1,758. 1,829. 1,852. 2,037. 2,118.78� 7713/16� 351/2� 11/4� 281/2� DT1ARY7836N 1,625. 1,788. 1,860. 1,887. 2,076. 2,158.84� 8313/16� 351/2� 11/4� 281/2� DT1ARY8436N 1,652. 1,818. 1,891. 1,922. 2,114. 2,198.90� 8913/16� 351/2� 11/4� 281/2� DT1ARY9036N 1,679. 1,847. 1,921. 1,957. 2,153. 2,238.96� 9513/16� 351/2� 11/4� 281/2� DT1ARY9636N 1,706. 1,877. 1,952. 1,992. 2,191. 2,278.


84� 8313/16� 421/2� 11/4� 281/2� DT1ARY8442N 1,695. 1,865. 1,940. 2,151. 2,366. 2,461.90� 8913/16� 421/2� 11/4� 281/2� DT1ARY9042N 1,731. 1,904. 1,980. 2,181. 2,399. 2,495.96� 9513/16� 421/2� 11/4� 281/2� DT1ARY9642N 1,757. 1,933. 2,010. 2,210. 2,431. 2,528.





Order Code


Example: DT1ARY6024NS, 114,114, 114


A 2 Leg table assemblyR Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint


Included with:





Options

Grommet Option:


Stretcher Option:

• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.

Knoll Office Tables

222

Y Leg TablesFreestanding Racetrack Table Top24�and 30� Deep

description w * w d t h pattern number

LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

24� Deep Racetrack with(2) Y-Legs, No Grommet


60� 5913/16� 231/2� 11/4� 281/2� DT1ATY6024NS $1,457. $1,603. $1,667. $2,600. $2,861. $2,976.66� 6513/16� 231/2� 11/4� 281/2� DT1ATY6624NS 1,502. 1,652. 1,718. 2,624. 2,887. 3,003.72� 7113/16� 231/2� 11/4� 281/2� DT1ATY7224NS 1,546. 1,701. 1,769. 2,648. 2,914. 3,031.78� 7713/16� 231/2� 11/4� 281/2� DT1ATY7824NS 1,591. 1,750. 1,820. 2,672. 2,940. 3,058.84� 8313/16� 231/2� 11/4� 281/2� DT1ATY8424NS 1,619. 1,780. 1,852. 2,696. 2,966. 3,085.90� 8913/16� 231/2� 11/4� 281/2� DT1ATY9024NS 1,646. 1,811. 1,883. 2,720. 2,993. 3,113.96� 9513/16� 231/2� 11/4� 281/2� DT1ATY9624NS 1,674. 1,841. 1,915. 2,744. 3,019. 3,140.



60� 5913/16� 291/2� 11/4� 281/2� DT1ATY6030NS 1,514. 1,665. 1,732. 2,639. 2,903. 3,020.66� 6513/16� 291/2� 11/4� 281/2� DT1ATY6630NS 1,556. 1,712. 1,780. 2,665. 2,932. 3,050.72� 7113/16� 291/2� 11/4� 281/2� DT1ATY7230NS 1,599. 1,758. 1,829. 2,691. 2,960. 3,079.78� 7713/16� 291/2� 11/4� 281/2� DT1ATY7830NS 1,641. 1,805. 1,877. 2,717. 2,989. 3,109.84� 8313/16� 291/2� 11/4� 281/2� DT1ATY8430NS 1,672. 1,839. 1,912. 2,743. 3,018. 3,139.90� 8913/16� 291/2� 11/4� 281/2� DT1ATY9030NS 1,702. 1,872. 1,947. 2,769. 3,046. 3,168.96� 9513/16� 291/2� 11/4� 281/2� DT1ATY9630NS 1,733. 1,906. 1,982. 2,795. 3,075. 3,198.





Order Code


Example: DT1ATY6024NS, 114,114, 114


A 2 Leg table assemblyT Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint


Included with:





Options

Grommet Option:


Stretcher Option:

• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.

Knoll Office Tables

223

Div

iden

dsH

oriz

on

Y Leg TablesFreestanding Racetrack Table Top36� and 42� Deep


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint


60� 5913/16� 351/2� 11/4� 281/2� DT1ATY6036N $1,566. $1,723. $1,792. $2,678. $2,945. $3,064.66� 6513/16� 351/2� 11/4� 281/2� DT1ATY6636N 1,615. 1,776. 1,847. 2,706. 2,976. 3,096.72� 7113/16� 351/2� 11/4� 281/2� DT1ATY7236N 1,663. 1,830. 1,903. 2,734. 3,007. 3,128.78� 7713/16� 351/2� 11/4� 281/2� DT1ATY7836N 1,712. 1,883. 1,958. 2,762. 3,038. 3,160.84� 8313/16� 351/2� 11/4� 281/2� DT1ATY8436N 1,739. 1,913. 1,989. 2,790. 3,069. 3,192.90� 8913/16� 351/2� 11/4� 281/2� DT1ATY9036N 1,767. 1,943. 2,021. 2,818. 3,100. 3,224.96� 9513/16� 351/2� 11/4� 281/2� DT1ATY9636N 1,794. 1,973. 2,052. 2,846. 3,131. 3,256.


84� 8313/16� 421/2� 11/4� 281/2� DT1ATY8442N 1,780. 1,958. 2,036. 2,839. 3,123. 3,248.90� 8913/16� 421/2� 11/4� 281/2� DT1ATY9042N 1,815. 1,997. 2,077. 2,869. 3,156. 3,282.96� 9513/16� 421/2� 11/4� 281/2� DT1ATY9642N 1,847. 2,032. 2,113. 2,898. 3,188. 3,316.





Order Code


Example: DT1ATY6024NS, 114,114, 114


A 2 Leg table assemblyT Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint


Included with:





Options

Grommet Option:


Stretcher Option:

• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.

Knoll Office Tables

224

Y Leg TablesCredenza Supported Rectangular Table Top24�, 30� and 36� Deep

description w * w d t h pattern no�

LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

24� Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet

(credenza not included)

60� 5913/16� 231/2� 11/4� 281/2� DT1CRY6024N $1,218. $1,340. $1,394. $1,428. $1,570. $1,633.66� 6513/16� 231/2� 11/4� 281/2� DT1CRY6624N 1,234. 1,357. 1,412. 1,455. 1,601. 1,664.72� 7113/16� 231/2� 11/4� 281/2� DT1CRY7224N 1,249. 1,375. 1,430. 1,483. 1,631. 1,696.78� 7713/16� 231/2� 11/4� 281/2� DT1CRY7824N 1,265. 1,392. 1,448. 1,511. 1,662. 1,728.84� 8313/16� 231/2� 11/4� 281/2� DT1CRY8424N 1,293. 1,423. 1,480. 1,539. 1,692. 1,760.90� 8913/16� 231/2� 11/4� 281/2� DT1CRY9024N 1,321. 1,453. 1,511. 1,566. 1,723. 1,791.96� 9513/16� 231/2� 11/4� 281/2� DT1CRY9624N 1,349. 1,484. 1,543. 1,594. 1,753. 1,823.



60� 5913/16� 291/2� 11/4� 281/2� DT1CRY6030N 1,253. 1,378. 1,433. 1,465. 1,611. 1,675.66� 6513/16� 291/2� 11/4� 281/2� DT1CRY6630N 1,274. 1,401. 1,457. 1,497. 1,647. 1,712.72� 7113/16� 291/2� 11/4� 281/2� DT1CRY7230N 1,294. 1,424. 1,481. 1,529. 1,682. 1,749.78� 7713/16� 291/2� 11/4� 281/2� DT1CRY7830N 1,315. 1,447. 1,505. 1,561. 1,718. 1,786.84� 8313/16� 291/2� 11/4� 281/2� DT1CRY8430N 1,345. 1,480. 1,539. 1,594. 1,753. 1,823.90� 8913/16� 291/2� 11/4� 281/2� DT1CRY9030N 1,375. 1,513. 1,574. 1,626. 1,789. 1,860.96� 9513/16� 291/2� 11/4� 281/2� DT1CRY9630N 1,405. 1,546. 1,608. 1,658. 1,824. 1,897.



60� 5913/16� 351/2� 11/4� 281/2� DT1CRY6036N 1,329. 1,462. 1,520. 1,565. 1,722. 1,791.66� 6513/16� 351/2� 11/4� 281/2� DT1CRY6636N 1,354. 1,489. 1,549. 1,598. 1,758. 1,828.72� 7113/16� 351/2� 11/4� 281/2� DT1CRY7236N 1,379. 1,517. 1,577. 1,630. 1,793. 1,865.78� 7713/16� 351/2� 11/4� 281/2� DT1CRY7836N 1,404. 1,544. 1,606. 1,663. 1,829. 1,902.84� 8313/16� 351/2� 11/4� 281/2� DT1CRY8436N 1,439. 1,583. 1,646. 1,695. 1,864. 1,939.90� 8913/16� 351/2� 11/4� 281/2� DT1CRY9036N 1,474. 1,621. 1,686. 1,728. 1,900. 1,976.96� 9513/16� 351/2� 11/4� 281/2� DT1CRY9636N 1,509. 1,660. 1,726. 1,760. 1,935. 2,013.



Credenza Supported Y Leg Table:


Order Code


Example: DT1CRY6024N, 114,114, 114


C Credenza supportassembly

R Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommet114 Base/ stretcher paint


Included with:

Credenza Supported Y leg Table:

• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate

Credenza must be specifiedseparately



Options

Grommet Option:


Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.

Knoll Office Tables

225

Div

iden

dsH

oriz

on

Y Leg TablesCredenza Supported Racetrack Table Top24�, 30� and 36� Deep

description w * w d h pattern no.

LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

24� Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet


60� 5913/16� 231/2� 281/2� DT1CTY6024N $1,216. $1,338. $1,392. $2,380. $2,619. $2,690.66� 6513/16� 231/2� 281/2� DT1CTY6624N 1,261. 1,387. 1,443. 2,393. 2,634. 2,711.72� 7113/16� 231/2� 281/2� DT1CTY7224N 1,306. 1,437. 1,494. 2,407. 2,648. 2,731.78� 7713/16� 231/2� 281/2� DT1CTY7824N 1,351. 1,486. 1,545. 2,420. 2,663. 2,752.84� 8313/16� 231/2� 281/2� DT1CTY8424N 1,366. 1,502. 1,562. 2,433. 2,678. 2,773.90� 8913/16� 231/2� 281/2� DT1CTY9024N 1,380. 1,519. 1,579. 2,447. 2,692. 2,793.96� 9513/16� 231/2� 281/2� DT1CTY9624N 1,395. 1,535. 1,596. 2,460. 2,707. 2,814.



60� 5913/16� 291/2� 281/2� DT1CTY6030N 1,274. 1,401. 1,457. 2,395. 2,635. 2,723.66� 6513/16� 291/2� 281/2� DT1CTY6630N 1,316. 1,448. 1,506. 2,422. 2,664. 2,756.72� 7113/16� 291/2� 281/2� DT1CTY7230N 1,359. 1,494. 1,554. 2,448. 2,694. 2,790.78� 7713/16� 291/2� 281/2� DT1CTY7830N 1,401. 1,541. 1,603. 2,475. 2,723. 2,823.84� 8313/16� 291/2� 281/2� DT1CTY8430N 1,431. 1,574. 1,638. 2,502. 2,752. 2,856.90� 8913/16� 291/2� 281/2� DT1CTY9030N 1,462. 1,608. 1,672. 2,528. 2,782. 2,890.96� 9513/16� 291/2� 281/2� DT1CTY9630N 1,492. 1,641. 1,707. 2,555. 2,811. 2,923.



60� 5913/16� 351/2� 281/2� DT1CTY6036N 1,348. 1,483. 1,542. 2,410. 2,651. 2,756.66� 6513/16� 351/2� 281/2� DT1CTY6636N 1,395. 1,535. 1,596. 2,450. 2,695. 2,802.72� 7113/16� 351/2� 281/2� DT1CTY7236N 1,443. 1,587. 1,651. 2,490. 2,739. 2,848.78� 7713/16� 351/2� 281/2� DT1CTY7836N 1,490. 1,639. 1,705. 2,530. 2,783. 2,894.84� 8313/16� 351/2� 281/2� DT1CTY8436N 1,524. 1,677. 1,744. 2,570. 2,827. 2,940.90� 8913/16� 351/2� 281/2� DT1CTY9036N 1,559. 1,714. 1,783. 2,610. 2,871. 2,986.96� 9513/16� 351/2� 281/2� DT1CTY9636N 1,593. 1,752. 1,822. 2,650. 2,915. 3,032.





Order Code


Example: DT1CTY6024N, 114,114, 114


C Credenza supportassembly

T Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommet114 Base/ stretcher paint


Included with:


• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate

Credenza must be specifiedseparately



Options

Grommet Option:


Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.

Knoll Office Tables

226

X Base Tables Dividends Horizon X base tables are designed to be used along with the Dividends Horizon system to create a consistent aesthetic throughout the entire office. With various height and width options, X base tables can be used in a multitude of applications, including collaboration areas in the open plan, break rooms, and lounge areas.

Available with a round, square or rounded square top shape with either a laminate or veneer finish, a Dividends Horizon X base table is appropriate for use in a vast array of applications from the private office to the open plan and even to lounge areas. The five height options allow for the same table base to be used in various applications while maintaining visual consistency throughout the space.

X base tables include a top, support column, and X base.

Available Sizes

Construction Worksurface:

- Material: 0.028" thick high pressure laminate or 0.6mm thick veneer on 1-1/8" particle board core

- Edge: plastic laminate tops have a 2mm edgeband; Techwood tops have a 3/16" thick Techwood edge.

Base:

- Foot: die cast aluminum

- Column: extruded aluminum with 3/16" thick structural plate

Table Supports X bases may be specified separately for use with an alternative table top. The appropriate X base size must be selected according to the width of the table top being used. X bases are available in five heights and may be used with table tops that are 30 to 48 inches wide.

Available Sizes Heights: 17, 21, 28-1/2, 36, and 42 inches

Construction Base:

- Foot: die cast aluminum

- Column: extruded aluminum with 3/16" thick structural plate

Note: Dividends Horizon tables are only available in Knoll Core paint and laminate finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.

Square X Base Table

Round X Base Table

Rounded Square X Base Table

X Base TablesTable SupportsSpecifications

Knoll Office Tables

227

Div

iden

dsH

oriz

on

X Base TablesSquare Table Tops17�, 21�, 28�, 36� and 42� High


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

17� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ASX303017 $887. $978. $1,018. $1,309. $1,447. $1,504.36� 3513/16� 3513/16� 11/4� 17� DT1ASX363617 925. 1,020. 1,062. 1,383. 1,523. 1,585.42� 4113/16� 4113/16� 11/4� 17� DT1ASX424217 1,026. 1,131. 1,177. 1,464. 1,612. 1,677.48� 4713/16� 4713/16� 11/4� 17� DT1ASX484817 1,077. 1,187. 1,235. 1,522. 1,676. 1,744.

21� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ASX303021 887. 978. 1,018. 1,309. 1,447. 1,504.36� 3513/16� 3513/16� 11/4� 21� DT1ASX363621 925. 1,020. 1,062. 1,383. 1,523. 1,585.42� 4113/16� 4113/16� 11/4� 21� DT1ASX424221 1,026. 1,131. 1,177. 1,464. 1,612. 1,677.48� 4713/16� 4713/16� 11/4� 21� DT1ASX484821 1,077. 1,187. 1,235. 1,522. 1,676. 1,744.

28� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ASX3030 907. 998. 1,038. 1,329. 1,467. 1,524.36� 3513/16� 3513/16� 11/4� 281/2� DT1ASX3636 945. 1,040. 1,082. 1,403. 1,543. 1,605.42� 4113/16� 4113/16� 11/4� 281/2� DT1ASX4242 1,046. 1,151. 1,197. 1,484. 1,632. 1,697.48� 4713/16� 4713/16� 11/4� 281/2� DT1ASX4848 1,097. 1,207. 1,255. 1,542. 1,696. 1,764.

36� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ASX303036 957. 1,048. 1,088. 1,379. 1,517. 1,574.36� 3513/16� 3513/16� 11/4� 36� DT1ASX363636 995. 1,090. 1,132. 1,453. 1,593. 1,655.42� 4113/16� 4113/16� 11/4� 36� DT1ASX424236 1,096. 1,201. 1,247. 1,534. 1,682. 1,747.

42� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ASX303042 977. 1,068. 1,108. 1,399. 1,537. 1,594.36� 3513/16� 3513/16� 11/4� 42� DT1ASX363642 1,015. 1,110. 1,152. 1,473. 1,613. 1,675.42� 4113/16� 4113/16� 11/4� 42� DT1ASX424242 1,116. 1,221. 1,267. 1,554. 1,702. 1,767.



X Base Table:

1. Pattern number2. Base Paint Finish3. Top Finish4. Edge Finish

Order Code

X Base Table:

Example: DT1ASX3030, 114, 114,114


A Table assemblyS Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish

Included with:

X Base Table:

• (1) X Base• Hardware kit• Table top

Note: X Base Tables are finishedwith textured paint, including 613Silver.

Note: X Base Tables are onlyavailable in Knoll core finishes.

Options

Knoll Office Tables

228

X Base TablesRound Table Tops17�, 21�, 28�, 36� and 42� High


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

17� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ACX3017 $896. $988. $1,028. $2,000. $2,200. $2,290.36� 3513/16� 3513/16� 11/4� 17� DT1ACX3617 932. 1,027. 1,069. 2,079. 2,289. 2,381.42� 4113/16� 4113/16� 11/4� 17� DT1ACX4217 1,031. 1,136. 1,182. 2,179. 2,399. 2,496.48� 4713/16� 4713/16� 11/4� 17� DT1ACX4817 1,082. 1,192. 1,240. 2,238. 2,464. 2,563.

21� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ACX3021 896. 988. 1,028. 2,000. 2,200. 2,290.36� 3513/16� 3513/16� 11/4� 21� DT1ACX3621 932. 1,027. 1,069. 2,079. 2,289. 2,381.42� 4113/16� 4113/16� 11/4� 21� DT1ACX4221 1,031. 1,136. 1,182. 2,179. 2,399. 2,496.48� 4713/16� 4713/16� 11/4� 21� DT1ACX4821 1,082. 1,192. 1,240. 2,238. 2,464. 2,563.

28� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ACX30 916. 1,008. 1,048. 2,020. 2,220. 2,310.36� 3513/16� 3513/16� 11/4� 281/2� DT1ACX36 952. 1,047. 1,089. 2,099. 2,309. 2,401.42� 4113/16� 4113/16� 11/4� 281/2� DT1ACX42 1,051. 1,156. 1,202. 2,199. 2,419. 2,516.48� 4713/16� 4713/16� 11/4� 281/2� DT1ACX48 1,102. 1,212. 1,260. 2,258. 2,484. 2,583.

36� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ACX3036 966. 1,058. 1,098. 2,070. 2,270. 2,360.36� 3513/16� 3513/16� 11/4� 36� DT1ACX3636 1,002. 1,097. 1,139. 2,149. 2,359. 2,451.42� 4113/16� 4113/16� 11/4� 36� DT1ACX4236 1,101. 1,206. 1,252. 2,249. 2,469. 2,566.

42� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ACX3042 986. 1,078. 1,118. 2,090. 2,290. 2,380.36� 3513/16� 3513/16� 11/4� 42� DT1ACX3642 1,022. 1,117. 1,159. 2,169. 2,379. 2,471.42� 4113/16� 4113/16� 11/4� 42� DT1ACX4242 1,121. 1,226. 1,272. 2,269. 2,489. 2,586.



X Base Table:


Order Code

X Base Table:

Example: DT1ACX3030, 114, 114,114


A Table assemblyC Round shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish

Included with:

X Base Table:




Options

Knoll Office Tables

229

Div

iden

dsH

oriz

on

X Base TablesRounded Square Table Tops17�, 21�, 28�, 36� and 42� High


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

17� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ADX303017 $896. $988. $1,028. $2,000. $2,200. $2,290.36� 3513/16� 3513/16� 11/4� 17� DT1ADX363617 932. 1,027. 1,069. 2,079. 2,289. 2,381.42� 4113/16� 4113/16� 11/4� 17� DT1ADX424217 1,031. 1,136. 1,182. 2,179. 2,399. 2,496.48� 4713/16� 4713/16� 11/4� 17� DT1ADX484817 1,082. 1,192. 1,240. 2,238. 2,464. 2,563.

21� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ADX303021 896. 988. 1,028. 2,000. 2,200. 2,290.36� 3513/16� 3513/16� 11/4� 21� DT1ADX363621 932. 1,027. 1,069. 2,079. 2,289. 2,381.42� 4113/16� 4113/16� 11/4� 21� DT1ADX424221 1,031. 1,136. 1,182. 2,179. 2,399. 2,496.48� 4713/16� 4713/16� 11/4� 21� DT1ADX484821 1,082. 1,192. 1,240. 2,238. 2,464. 2,563.

28� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ADX3030 916. 1,008. 1,048. 2,020. 2,220. 2,310.36� 3513/16� 3513/16� 11/4� 281/2� DT1ADX3636 952. 1,047. 1,089. 2,099. 2,309. 2,401.42� 4113/16� 4113/16� 11/4� 281/2� DT1ADX4242 1,051. 1,156. 1,202. 2,199. 2,419. 2,516.48� 4713/16� 4713/16� 11/4� 281/2� DT1ADX4848 1,102. 1,212. 1,260. 2,258. 2,484. 2,583.

36� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ADX303036 966. 1,058. 1,098. 2,070. 2,270. 2,360.36� 3513/16� 3513/16� 11/4� 36� DT1ADX363636 1,002. 1,097. 1,139. 2,149. 2,359. 2,451.42� 4113/16� 4113/16� 11/4� 36� DT1ADX424236 1,101. 1,206. 1,252. 2,249. 2,469. 2,566.



X Base Table:


Order Code

X Base Table:

Example: DT1ADX3030, 114, 114,114


A Table assemblyD Rounded Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish

Included with:

X Base Table:




Options

Knoll Office Tables

230

X Base TablesRounded Square Table Tops17�, 21�, 28�, 36� and 42� High


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

42� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ADX303042 $986. $1,078. $1,118. $2,090. $2,290. $2,380.36� 3513/16� 3513/16� 11/4� 42� DT1ADX363642 1,022. 1,117. 1,159. 2,169. 2,379. 2,471.42� 4113/16� 4113/16� 11/4� 42� DT1ADX424242 1,121. 1,226. 1,272. 2,269. 2,489. 2,586.



X Base Table:


Order Code

X Base Table:

Example: DT1ADX3030, 114, 114,114


A Table assemblyD Rounded Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish

Included with:

X Base Table:




Options

Knoll Office Tables

231

Div

iden

dsH

oriz

on

Table SupportsX BasesCredenza Support Spacer

description w h d pattern no. P1 P2 P3

Small X-Base, for use with 30� or 36� wide round,square or rounded square table tops

17� DT1BXS17 $476. $526. $548.21� DT1BXS21 476. 526. 548.28� DT1BXS 496. 546. 568.36� DT1BXS36 546. 596. 618.42� DT1BXS42 566. 616. 638.

Large X Base, for use with 42� or 48� wide round,square or rounded square table tops

17� DT1BXL17 525. 580. 604.21� DT1BXL21 525. 580. 604.28� DT1BXL 545. 600. 624.36� DT1BXL36 595. 650. 674.42� DT1BXL42 615. 670. 694.

Credenza Support SpacerFor use with Dividends Horizon Credenza

95/8� 215/16� 19/16� DT1S 132. 145. 151.


Table Supports:

1. Pattern number2. Paint Finish

Order Code

X Base:

Example: DT1BXS, 114


B BaseS X Shape114 Paint finishCredenza Support Spacer:

Example: DT1S, 114

DT1 Dividends Horizon TableS Support Spacer114 Paint finish

Included with:

X Base:

• X Base• Hardware kit

Credenza Support spacer:

• Support spacer• Hardware Kit

Note: X bases are painted withtextured paint, including 613 Silver.

Note:Table supports are onlyavailable in Knoll core finishes.

Options

Knoll Office Tables

232

wing

Dividends Horizon Conference Tables Dividends Horizon conference tables are designed with a scale and visual language consistent with the full scope of Dividends Horizon products. This design consistency makes Dividends Horizon tables appropriate for use in conference, meeting, private office and open plan office applications.

Dividends Horizon conference tables are available in racetrack, rectangular, or boat shape and in all standard Dividends Horizon finishes.

Conference tables include a table top and base assembly. A conference table base assembly includes two Y legs, one center support T base, and two horizontal stretchers that connect the three bases. Top sizes up to 120 inches are produced in one piece, while tops longer than 120 inches are produced in two pieces.

Available Sizes Width: 102- 144 inches Depth: 36- 48 inches Height: 28-1/2 inches

Construction Worksurface:

laminate or 0.6mm thick veneer on 1-1/8 inch thick particle board core

2mm edgeband; Techwood tops have a 3/16" thick Techwood edge

Base:

3/16 inch thick structural plate

Note: Dividends Horizon conference tables are only available in Knoll Core paint, laminate, and Techwood finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.

Note: Grain patterns on woodgrain laminate and veneer tops will not match at the seam in the middle of tables longer than 120 inches.

Rectangular Conference Table Racetrack Conference Table

Boat Shape Conference Table

Conference TablesSpecifications

Knoll Office Tables

233

Div

iden

dsH

oriz

on

Conference TablesRectangular Table Top36�, 42� and 48� Deep


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

36� Deep RectangularConference Table

102� 10113/16� 351/2� 11/4� 281/2� DT1ARY10236N $2,100. $2,150. $2,200. $2,400. $2,500. $2,700.108� 10713/16� 351/2� 11/4� 281/2� DT1ARY10836N 2,150. 2,200. 2,250. 2,450. 2,695. 2,803.


102� 10113/16� 411/2� 11/4� 281/2� DT1ARY10242N 2,150. 2,200. 2,250. 2,450. 2,550. 2,750.108� 10713/16� 411/2� 11/4� 281/2� DT1ARY10842N 2,200. 2,250. 2,300. 2,475. 2,750. 2,887.120� 11913/16� 411/2� 11/4� 281/2� DT1ARY12042N 2,352. 2,402. 2,452. 2,571. 2,828. 2,941.132� 13113/16� 411/2� 11/4� 281/2� DT1ARY13242N 2,452. 2,502. 2,552. 2,989. 3,288. 3,420.144� 14313/16� 411/2� 11/4� 281/2� DT1ARY14442N 2,552. 2,602. 2,652. 3,407. 3,748. 3,898.


102� 10113/16� 471/2� 11/4� 281/2� DT1ARY10248N 2,200. 2,250. 2,300. 2,500. 2,650. 2,850.108� 10713/16� 471/2� 11/4� 281/2� DT1ARY10848N 2,250. 2,300. 2,350. 2,575. 2,825. 2,950.120� 11913/16� 471/2� 11/4� 281/2� DT1ARY12048N 2,409. 2,459. 2,509. 2,646. 2,911. 3,027.132� 13113/16� 471/2� 11/4� 281/2� DT1ARY13248N 2,509. 2,559. 2,609. 3,072. 3,379. 3,514.144� 14313/16� 471/2� 11/4� 281/2� DT1ARY14448N 2,609. 2,659. 2,709. 3,497. 3,847. 4,001.



Conference Tables:


Order Code

Conference Table:

Example: DT1ARY10836N


A Table AssemblyR Rectangular shapeY Y Leg Base108 Overall width in inches36 Overall depth in inchesN No grommet114 Base/ stretcher paint


Included with:

Conference Table:

• (2) Y Legs• (1) T leg• (2) Stretchers• Table Top• Hardware Kit

Options

Conference Tables

Knoll Office Tables

234

Conference TablesRacetrack Table Top36�, 42� and 48� Deep

description w w d t h pattern no.

LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

36� Deep RacetrackConference Table

102� 10113/16� 351/2� 11/4� 281/2� DT1ATY10236N $2,100. $2,150. $2,200. $3,100. $3,400. $3,500.108� 10713/16� 351/2� 11/4� 281/2� DT1ATY10836N 2,150. 2,200. 2,250. 3,145. 3,460. 3,598.


102� 10113/16� 411/2� 11/4� 281/2� DT1ATY10242N 2,150. 2,200. 2,250. 3,125. 3,450. 3,600.108� 10713/16� 411/2� 11/4� 281/2� DT1ATY10842N 2,200. 2,250. 2,300. 3,200. 3,500. 3,650.120� 11913/16� 411/2� 11/4� 281/2� DT1ATY12042N 2,352. 2,402. 2,452. 3,266. 3,593. 3,737.132� 13113/16� 411/2� 11/4� 281/2� DT1ATY13242N 2,452. 2,502. 2,552. 3,750. 4,125. 4,290.144� 14313/16� 411/2� 11/4� 281/2� DT1ATY14442N 2,552. 2,602. 2,652. 4,233. 4,656. 4,842.


102� 10113/16� 471/2� 11/4� 281/2� DT1ATY10248N 2,200. 2,250. 2,300. 3,200. 3,475. 3,625.108� 10713/16� 471/2� 11/4� 281/2� DT1ATY10848N 2,250. 2,300. 2,350. 3,300. 3,550. 3,700.120� 11913/16� 471/2� 11/4� 281/2� DT1ATY12048N 2,409. 2,459. 2,509. 3,339. 3,673. 3,820.132� 13113/16� 471/2� 11/4� 281/2� DT1ATY13248N 2,509. 2,559. 2,609. 3,831. 4,214. 4,383.144� 14313/16� 471/2� 11/4� 281/2� DT1ATY14448N 2,609. 2,659. 2,709. 4,323. 4,755. 4,945.



Conference Tables:


Order Code

Conference Table:





Included with:

Conference Table:


Options

Conference Tables

Knoll Office Tables

235

Div

iden

dsH

oriz

on

Conference TablesBoat Shape Table Top42� and 48� Deep


LaminateTop

P1 Paint

LaminateTop

P2 Paint

LaminateTop

P3 Paint

TechgrainTop

P1 Paint

TechgrainTop

P2 Paint

TechgrainTop

P3 Paint

42� Deep Boat ShapeConference Table

102� 10113/16� 411/2� 11/4� 281/2� DT1ABY10242N $2,150. $2,200. $2,250. $3,125. $3,450. $3,600.108� 10713/16� 411/2� 11/4� 281/2� DT1ABY10842N 2,200. 2,250. 2,300. 3,200. 3,500. 3,650.120� 11913/16� 411/2� 11/4� 281/2� DT1ABY12042N 2,352. 2,402. 2,452. 3,266. 3,593. 3,737.132� 13113/16� 411/2� 11/4� 281/2� DT1ABY13242N 2,452. 2,502. 2,552. 3,750. 4,125. 4,290.144� 14313/16� 411/2� 11/4� 281/2� DT1ABY14442N 2,552. 2,602. 2,652. 4,233. 4,656. 4,842.

48� Deep Boat ShapeConference Table

102� 10113/16� 471/2� 11/4� 281/2� DT1ABY10248N 2,200. 2,250. 2,300. 3,200. 3,475. 3,625.108� 10713/16� 471/2� 11/4� 281/2� DT1ABY10848N 2,250. 2,300. 2,350. 3,300. 3,550. 3,700.120� 11913/16� 471/2� 11/4� 281/2� DT1ABY12048N 2,409. 2,459. 2,509. 3,339. 3,673. 3,820.132� 13113/16� 471/2� 11/4� 281/2� DT1ABY13248N 2,509. 2,559. 2,609. 3,831. 4,214. 4,383.144� 14313/16� 471/2� 11/4� 281/2� DT1ABY14448N 2,609. 2,659. 2,709. 4,323. 4,755. 4,945.



Conference Tables:


Order Code

Conference Table:





Included with:

Conference Table:


Options

Conference Tables

Knoll Office Tables

236

pattern no. page

AA1DD 185, 187

AA1DW 185, 187

AA1NSK 211

AA1WS24 182

AA1WS30 182

AA1WS36 182

AA1WS48 182

AA1WSD 182

AA2T5E19 182

AA2T5E25 182

AA2T5E37 182

AB1 CL24L 165

AB1 CL24R 165

AB1 CL30L 165

AB1 CL30R 165

AB1 CLF24L 165

AB1 CLF24R 165

AB1 CLF30L 165

AB1 CLF30R 165

AB1 F24 211

AB1 I25(G/C) 165

AB1 I27A(G/C) 165

AB1 I27F(G/C) 165

AB1 VL 165

AB1AS27 14

AB1AS28 14

AB1AS30 14

AB1ASC27 14

AB1ASC28 14

AB1ASC30 14

AB1AW27 14

AB1AW28 14

AD C35 SA 179

AD C35 SB 175

AD C35 SF 167

AD C35 SH 171

AD C36 SA 179

AD C36 SB 175

AD C36 SF 167

AD C36 SH 171

AD C4242 DB 176

AD C4242 DF 168

AD C4242 LA 180

AD C4242 LB 176

AD C4242 LF 168

AD C4242 LH 172

AD C4242 RA 180

AD C4242 RB 176

AD C4242 RF 168

AD C4242 RH 172

AD C4242 SA 180

AD C4242 SB 176

AD C4242 SF 168

AD C4242 SH 172

AD C44 DA 180

AD C44 DB 176

AD C44 DF 168

AD C44 DH 172

AD C44 LA 180

AD C44 LB 176

AD C44 LF 168

pattern no. page

AD C44 LH 172

AD C44 RA 180

AD C44 RB 176

AD C44 RF 168

AD C44 RH 172

AD C44 SA 180

AD C44 SB 176

AD C44 SF 168

AD C44 SH 172

AD C45 DA 179

AD C45 DB 175

AD C45 DF 167

AD C45 DH 171

AD C45 RA 179

AD C45 RB 175

AD C45 RF 167

AD C45 RH 171

AD C45 SA 179

AD C45 SB 175

AD C45 SF 167

AD C45 SH 171

AD C46 DA 179

AD C46 DB 175

AD C46 DF 167

AD C46 DH 171

AD C46 RA 179

AD C46 RB 175

AD C46 RF 167

AD C46 RH 171

AD C46 SA 179

AD C46 SB 175

AD C46 SF 167

AD C46 SH 171

AD C47 DA 179

AD C47 DB 175

AD C47 DF 167

AD C47 DH 171

AD C47 RA 179

AD C47 RB 175

AD C47 RF 167

AD C47 RH 171

AD C47 SA 179

AD C47 SB 175

AD C47 SF 167

AD C47 SH 171

AD C53 SA 178

AD C53 SB 174

AD C53 SF 166

AD C53 SH 170

AD C54 DA 178

AD C54 DB 174

AD C54 DF 166

AD C54 DH 170

AD C54 LA 178

AD C54 LB 174

AD C54 LF 166

AD C54 LH 170

AD C54 SA 178

AD C54 SB 174

AD C54 SF 166

AD C54 SH 170

pattern no. page

AD C55 DA 180

AD C55 DB 176

AD C55 DF 168

AD C55 DH 172

AD C55 LA 180

AD C55 LB 176

AD C55 LF 168

AD C55 LH 172

AD C55 RA 180

AD C55 RB 176

AD C55 RF 168

AD C55 RH 172

AD C55 SA 180

AD C55 SB 176

AD C55 SF 168

AD C55 SH 172

AD C63 SA 178

AD C63 SB 174

AD C63 SF 166

AD C63 SH 170

AD C64 DA 178

AD C64 DB 174

AD C64 DF 166

AD C64 DH 170

AD C64 LA 178

AD C64 LB 174

AD C64 LF 166

AD C64 LH 170

AD C64 SA 178

AD C64 SB 174

AD C64 SF 166

AD C64 SH 170

AD C74 DA 178

AD C74 DB 174

AD C74 DF 166

AD C74 DH 170

AD C74 LA 178

AD C74 LB 174

AD C74 LF 166

AD C74 LH 170

AD C74 SA 178

AD C74 SB 174

AD C74 SF 166

AD C74 SH 170

AD S36 DA 181

AD S36 DB 177

AD S36 DF 169

AD S36 DH 173

AD S36 SA 181

AD S36 SB 177

AD S36 SF 169

AD S36 SH 173

AD S42 DA 181

AD S42 DB 177

AD S42 DF 169

AD S42 DH 173

AD S42 SA 181

AD S42 SB 177

AD S42 SF 169

AD S42 SH 173

AD S48 DA 181

pattern no. page

AD S48 DB 177

AD S48 DF 169

AD S48 DH 173

AD S48 SA 181

AD S48 SB 177

AD S48 SF 169

AD S48 SH 173

AD S60 DA 181

AD S60 DB 177

AD S60 DF 169

AD S60 DH 173

AD S60 SA 181

AD S60 SB 177

AD S60 SF 169

AD S60 SH 173

AD S72 DA 181

AD S72 DB 177

AD S72 DF 169

AD S72 DH 173

AD S72 SA 181

AD S72 SB 177

AD S72 SF 169

AD S72 SH 173

AD S84 SA 181

AD S84 SB 177

AD S84 SF 169

AD S84 SH 173

APTLL26 14

APTLL27 14

APTLL28 14

AR1 CB 186, 188, 211

AR1 DA 186, 188

AR1 DB 186, 188

AR1 DC 188

AR1 DEHI 186

AR1 DEM2 185

AR1 DEM4 185

AR1 DEPI 186

AR1 DTHI 188

AR1 DTM2 187

AR1 DTM4 187

AR1 DTPI 188

AR1 DX 186, 188

AR1 DY 186, 188

AR1 DZ 188

AR1 EJ1 185

AR1 EJ10 185

AR1 EJ2 185

AR1 EJ3 185

AR1 EJ4 185

AR1 EJ5 185

AR1 EJ6 185

AR1 EJ7 185

AR1 EJ8 185

AR1 TJ1 187

AR1 TJ10 187

AR1 TJ2 187

AR1 TJ3 187

AR1 TJ4 187

AR1 TJ5 187

AR1 TJ6 187

Alpha-Numeric Index

237

pattern no. page

AR1 TJ7 187

AR1 TJ8 187

AT1 D50A 191

AT1 D50F 191

AT1 D62A 191

AT1 D62F 191

AT1 E24LA 190

AT1 E24LF 190

AT1 E24RA 190

AT1 E24RF 190

AT1 P36A 189

AT1 P36F 189

AT1 R42A 191

AT1 R42F 191

AT1 R48A 191

AT1 R48F 191

AT1 TA 189

AT1 TL 189

AT1 W24A 189

AT1 W24F 189

AT1 W30A 190

AT1 W30F 190

AT1 W50A 191

AT1 W50F 191

ATA1R36 10

ATA1R42 10

ATA1R48 10

ATA1T44242 10

ATA1T44830 10

ATA1T44848 10

ATA1T46030 10

ATA1T47230 10

ATA1T47236 10

ATARLL3627(L/M/V) 11






ATAT4LL424227(L/M/V) 11

ATAT4LL424228(L/M/V) 11

ATAT4LL484827(L/M/V) 11

ATAT4LL484828(L/M/V) 11

ATDT1LFM483027(L/M/V) 12








ATDT1LFS483027(L/M/V) 12








ATDT1LPM483027(L/M/V) 12






pattern no. page



ATDT1LPS483027(L/M/V) 13








ATDT4LL483027(L/M/V) 11

ATDT4LL483028(L/M/V) 11

ATDT4LL603027(L/M/V) 11

ATDT4LL603028(L/M/V) 11

ATDT4LL723027(L/M/V) 11

ATDT4LL723028(L/M/V) 11

ATDT4LL723627(L/M/V) 11

ATDT4LL723628(L/M/V) 11

AUP B3624M 212

AUP B3624RC 212

AUP B4824M 212

AUP B4824RC 212

AUP B6024M 212

AUP B6024RC 212

AUP B7224M 212

AUP B7224RC 212

AUP C4872S5 198

AUP C7248S5 198

AUP D624 200

AUP M72DC4 197

AUP M72DF4 197

AUP MR36 212

AUP MR48 212

AUP MR60 212

AUP MR72 212

AUP O664 200

AUP PDU 211

AUP R424 200

AUP S48D4 199

AUP S48S2 199

AUP S48S4 199

AUP S60D4 199

AUP S72D4 199

AUP S72E4 199

AUP T363 200

AUP T48A LCT 215

AUP T48A LGT 215

AUP T48A RCT 215

AUP T48A RGT 215

AUP T48E LCT 215

AUP T48E LGT 215

AUP T48E RCT 215

AUP T48E RGT 215

AUP V48S5 198

AUP W60D4 200

AUP Y72DCL4 197

AUP Y72DCR4 197

AUP Y72DFL4 197

AUP Y72DFR4 197

AUPCCV 201

AUPCGV 201

AUPLC4 211

AUPLC5 211

AUPM C3660S5 207

AUPM C3672S5 207

pattern no. page

AUPM C4242D5 204

AUPM C4242S5 204

AUPM C4260L5 208

AUPM C4260R5 207

AUPM C4260S5 207

AUPM C4272L5 208

AUPM C4272R5 207

AUPM C4272S5 207

AUPM C4848D5 204

AUPM C4848S5 204

AUPM C4860D5 207

AUPM C4860L5 208

AUPM C4860R5 207

AUPM C4860S5 207

AUPM C4872D5 207

AUPM C4872L5 208

AUPM C4872R5 207

AUPM C4872S5 207

AUPM C4884D5 207

AUPM C4884L5 208

AUPM C4884R5 207

AUPM C4884S5 207

AUPM C6036S5 205

AUPM C6042L5 205

AUPM C6042R5 206

AUPM C6042S5 205

AUPM C6048D5 205

AUPM C6048L5 205

AUPM C6048R5 206

AUPM C6048S5 205

AUPM C6060D5 204

AUPM C6060S5 204

AUPM C7236S5 205

AUPM C7242L5 205

AUPM C7242R5 206

AUPM C7242S5 205

AUPM C7248D5 205

AUPM C7248L5 205

AUPM C7248R5 206

AUPM C7248S5 205

AUPM C8448D5 205

AUPM C8448L5 205

AUPM C8448R5 206

AUPM C8448S5 205

AUPM D594 209

AUPM D604 209

AUPM P4875S5 209

AUPM P7548S5 209

AUPM S30D4 202

AUPM S30S4 202

AUPM S36D4 202

AUPM S36S2 203

AUPM S36S4 202

AUPM S42D4 202

AUPM S42S2 203

AUPM S42S4 202

AUPM S48D4 202

AUPM S48S2 203

AUPM S48S4 202

AUPM S54D4 202

AUPM S54S4 202

AUPM S60D4 202

AUPM S60S2 203

AUPM S60S4 202

AUPM S66D4 202

pattern no. page

AUPM S66S4 202

AUPM S72D4 202

AUPM S72S4 202

AUPM S84D4 202

AUPM S84S4 202

AUPM SCV 210

AUPM SGV 210

AUPTS 215

AZ1 1836F 183

AZ1 1842F 183

AZ1 1848F 183

AZ1 1860F 183

AZ1 1872F 183

AZ1 2736F 183

AZ1 2742F 183

AZ1 2748F 183

AZ1 2760F 183

AZ1 2772F 183

AZ1 CL18 184

AZ1 CL27 184

AZ1 CL36 184

AZ1 CS 184

DT1ABY10242N 236

DT1ABY10248N 236

DT1ABY10842N 236

DT1ABY10848N 236

DT1ABY12042N 236

DT1ABY12048N 236

DT1ABY13242N 236

DT1ABY13248N 236

DT1ABY14442N 236

DT1ABY14448N 236

DT1ACX30 229

DT1ACX3017 229

DT1ACX3021 229

DT1ACX3036 229

DT1ACX3042 229

DT1ACX36 229

DT1ACX3617 229

DT1ACX3621 229

DT1ACX3636 229

DT1ACX3642 229

DT1ACX42 229

DT1ACX4217 229

DT1ACX4221 229

DT1ACX4236 229

DT1ACX4242 229

DT1ACX48 229

DT1ACX4817 229

DT1ACX4821 229

DT1ADX3030 230

DT1ADX303017 230

DT1ADX303021 230

DT1ADX303036 230

DT1ADX303042 231

DT1ADX3636 230

DT1ADX363617 230

DT1ADX363621 230

DT1ADX363636 230

DT1ADX363642 231

DT1ADX4242 230

DT1ADX424217 230

DT1ADX424221 230

DT1ADX424236 230

DT1ADX424242 231

Knoll Office Tables

238

pattern no. page

DT1ADX4848 230

DT1ADX484817 230

DT1ADX484821 230

DT1ARY10236N 234

DT1ARY10242N 234

DT1ARY10248N 234

DT1ARY10836N 234

DT1ARY10842N 234

DT1ARY10848N 234

DT1ARY12042N 234

DT1ARY12048N 234

DT1ARY13242N 234

DT1ARY13248N 234

DT1ARY14442N 234

DT1ARY14448N 234

DT1ARY6024NS 221

DT1ARY6030NS 221

DT1ARY6036N 222

DT1ARY6624NS 221

DT1ARY6630NS 221

DT1ARY6636N 222

DT1ARY7224NS 221

DT1ARY7230NS 221

DT1ARY7236N 222

DT1ARY7824NS 221

DT1ARY7830NS 221

DT1ARY7836N 222

DT1ARY8424NS 221

DT1ARY8430NS 221

DT1ARY8436N 222

DT1ARY8442N 222

DT1ARY9024NS 221

DT1ARY9030NS 221

DT1ARY9036N 222

DT1ARY9042N 222

DT1ARY9624NS 221

DT1ARY9630NS 221

DT1ARY9636N 222

DT1ARY9642N 222

DT1ASX3030 228

DT1ASX303017 228

DT1ASX303021 228

DT1ASX303036 228

DT1ASX303042 228

DT1ASX3636 228

DT1ASX363617 228

DT1ASX363621 228

DT1ASX363636 228

DT1ASX363642 228

DT1ASX4242 228

DT1ASX424217 228

DT1ASX424221 228

DT1ASX424236 228

DT1ASX424242 228

DT1ASX4848 228

DT1ASX484817 228

DT1ASX484821 228

DT1ATY10236N 235

DT1ATY10242N 235

DT1ATY10248N 235

DT1ATY10836N 235

DT1ATY10842N 235

DT1ATY10848N 235

DT1ATY12042N 235

DT1ATY12048N 235

pattern no. page

DT1ATY13242N 235

DT1ATY13248N 235

DT1ATY14442N 235

DT1ATY14448N 235

DT1ATY6024NS 223

DT1ATY6030NS 223

DT1ATY6036N 224

DT1ATY6624NS 223

DT1ATY6630NS 223

DT1ATY6636N 224

DT1ATY7224NS 223

DT1ATY7230NS 223

DT1ATY7236N 224

DT1ATY7824NS 223

DT1ATY7830NS 223

DT1ATY7836N 224

DT1ATY8424NS 223

DT1ATY8430NS 223

DT1ATY8436N 224

DT1ATY8442N 224

DT1ATY9024NS 223

DT1ATY9030NS 223

DT1ATY9036N 224

DT1ATY9042N 224

DT1ATY9624NS 223

DT1ATY9630NS 223

DT1ATY9636N 224

DT1ATY9642N 224

DT1BXL 232

DT1BXL17 232

DT1BXL21 232

DT1BXL36 232

DT1BXL42 232

DT1BXS 232

DT1BXS17 232

DT1BXS21 232

DT1BXS36 232

DT1BXS42 232

DT1CRY6024N 225

DT1CRY6030N 225

DT1CRY6036N 225

DT1CRY6624N 225

DT1CRY6630N 225

DT1CRY6636N 225

DT1CRY7224N 225

DT1CRY7230N 225

DT1CRY7236N 225

DT1CRY7824N 225

DT1CRY7830N 225

DT1CRY7836N 225

DT1CRY8424N 225

DT1CRY8430N 225

DT1CRY8436N 225

DT1CRY9024N 225

DT1CRY9030N 225

DT1CRY9036N 225

DT1CRY9624N 225

DT1CRY9630N 225

DT1CRY9636N 225

DT1CTY6024N 226

DT1CTY6030N 226

DT1CTY6036N 226

DT1CTY6624N 226

DT1CTY6630N 226

DT1CTY6636N 226

pattern no. page

DT1CTY7224N 226

DT1CTY7230N 226

DT1CTY7236N 226

DT1CTY7824N 226

DT1CTY7830N 226

DT1CTY7836N 226

DT1CTY8424N 226

DT1CTY8430N 226

DT1CTY8436N 226

DT1CTY9024N 226

DT1CTY9030N 226

DT1CTY9036N 226

DT1CTY9624N 226

DT1CTY9630N 226

DT1CTY9636N 226

DT1S 232

EB1ACOL 219

ET1OT3672 218

ET1OT48120 218

ET1OT4896 218

ET1OT54120 218

ET1OT60144 218

ET1RCT3048 217

ET1RCT3060 217

ET1RCT3072 217

ET1RCT3469 217

ET1RCT3479 217

ET1RCT3660 217

ET1RCT3672 217

ET1RCT4284 217

ET1RCT4896 217

ET1RT30 217

ET1RT36 217

ET1RT36C 217

ET1RT42 217

ET1RT48 217

ET1RT60 217

ET1ST22C 217

ET1ST2416 217

ET1ST30 217

ET1ST36 217

ET1ST42 217

ET1ST48 217

ET1ST60 217

ET2DT54 219

ET2MT38 219

ET2MT44 219

ET2TT41 219

ET2TT50 219

ET3LEG3C 219

ET3LEG3G 219

ET3LEG4C 219

ET3LEG4G 219

IB 22DE 157

IB 22SE 157

IB 27DA 156

IB 27DB 156

IB 27DC 156

IB 27DSC 157

IB 27SA 156

IB 27SB 156

IB 27SC 156

IB 28DE 157

IB 28SE 157

IB 28W 158

pattern no. page

IB 28X 158

IB 28Y 158

IB 32M 158

IB 32W 158

IB 32X 158

IB 32Y 158

IB 33DA 156

IB 33DB 156

IB 33DC 156

IB 33DSA 157

IB 33DSB 157

IB 33DSC 157

IB 33SA 156

IB 33SB 156

IB 33SC 156

IB 34DE 157

IB 34SE 157

IB 39DA 156

IB 39DB 156

IB 39DC 156

IB 39DSA 157

IB 39DSB 157

IB 39DSC 157

IB 39SA 156

IB 39SB 156

IB 39SC 156

IB 39T 157

IB 40DE 157

IB 40SE 157

IB 45DA 156

IB 45DB 156

IB 45DC 156

IB 45DSA 157

IB 45DSB 157

IB 45DSC 157

IB 45SA 156

IB 45SB 156

IB 45SC 156

IB 45T 157

IB 48X 158

IB 52DE 157

IB 52SE 157

IB 57DA 156

IB 57DB 156

IB 57DC 156

IB 57SA 156

IB 57SB 156

IB 57SC 156

IB 57T 157

IB 58DE 158

IB 58SE 158

IB ST 18 158

IB ST 22 158

IB ST 28 158

IB ST 44 158

IBK 158

IBZ 158

IC 159

ICEC3624E 155

ICEC4224A 151

ICEC4224B 150

ICEC4224D 152

ICEC4224E 155

ICEC4224K 154

ICEC4824A 151

Knoll Office Tables

239

pattern no. page

ICEC4824B 150

ICEC4824D 152

ICEC4824E 155

ICEC4824K 154

ICEC4830A 151

ICEC4830B 150

ICEC4830D 152

ICEC4830E 155

ICEC4830K 154

ICER3000W 149

ICER3000X 149

ICER3000Y 149

ICER3600W 149

ICER3600X 149

ICER3600Y 149

ICER4200W 149

ICER4200X 149

ICER4200Y 149

ICER4800X 149

ICER4800Y 149

ICES3024A 151

ICES3024B 150

ICES3024C 153

ICES3024D(R/L) 152

ICES3024E 155

ICES3024K 154

ICES3030A 151

ICES3030B 150

ICES3030C 153

ICES3030D(R/L) 152

ICES3030E 155

ICES3030K 154

ICES3624A 151

ICES3624B 150

ICES3624C 153

ICES3624D(R/L) 152

ICES3624E 155

ICES3624K 154

ICES3630A 151

ICES3630B 150

ICES3630C 153

ICES3630D(R/L) 152

ICES3630E 155

ICES3630K 154

ICES4224A 151

ICES4224B 150

ICES4224C 153

ICES4224D(R/L) 152

ICES4224E 155

ICES4224K 154

ICES4230A 151

ICES4230B 150

ICES4230C 153

ICES4230D(R/L) 152

ICES4230E 155

ICES4230K 154

ICES4824A 151

ICES4824B 150

ICES4824C 153

ICES4824D(R/L) 152

ICES4824E 155

ICES4824K 154

ICES4830A 151

ICES4830B 150

ICES4830C 153

pattern no. page

ICES4830D(R/L) 152

ICES4830E 155

ICES4830K 154

ICES6024A 151

ICES6024B 150

ICES6024C 153

ICES6024D(R/L) 152

ICES6024E 155

ICES6024K 154

ICES6030A 151

ICES6030B 150

ICES6030C 153

ICES6030D(R/L) 152

ICES6030E 155

ICES6030K 154

ICES7224A 151

ICES7224B 150

ICES7230A 151

ICES7230B 150

ID C3624 E2 148

ID C4224 A2 141

ID C4224 B2 140

ID C4224 D2 142

ID C4224 E2 148

ID C4224 K2 147

ID C42SK A2 146

ID C42SK B2 146

ID C4824 A2 141

ID C4824 B2 140

ID C4824 D2 142

ID C4824 E2 148

ID C4824 K2 147

ID C4830 A2 141

ID C4830 B2 140

ID C4830 D2 142

ID C4830 E2 148

ID C4830 K2 147

ID C48DK A2 146

ID C48DK B2 146

ID C48DS A2 145

ID C48DS B2 145

ID C48DS D2 145

ID C48DS E2 148

ID C48DS K2 147

ID C48SK A2 146

ID C48SK B2 146

ID C48SS A2 145

ID C48SS B2 145

ID C48SS D2 145

ID C48SS E2 148

ID C48SS K2 147

ID R3000 W2 139

ID R3000 X2 139

ID R3000 Y2 139

ID R3600 W2 139

ID R3600 X2 139

ID R3600 Y2 139

ID R4200 W2 139

ID R4200 X2 139

ID R4200 Y2 139

ID R4800 X2 139

ID R4800 Y2 139

ID S3024 A2 141

ID S3024 B2 140

ID S3024 C2 143

pattern no. page

ID S3024 D(R/L)2 142

ID S3024 E2 148

ID S3024 K2 147

ID S3030 A2 141

ID S3030 B2 140

ID S3030 C2 143

ID S3030 D(R/L)2 142

ID S3030 E2 148

ID S3030 K2 147

ID S3624 A2 141

ID S3624 B2 140

ID S3624 C2 143

ID S3624 D(R/L)2 142

ID S3624 E2 148

ID S3624 K2 147

ID S3630 A2 141

ID S3630 B2 140

ID S3630 C2 143

ID S3630 D(R/L)2 142

ID S3630 E2 148

ID S3630 K2 147

ID S36DK A2 146

ID S36DK B2 146

ID S36DS A2 145

ID S36DS B2 145

ID S36DS D2 145

ID S4224 A2 141

ID S4224 B2 140

ID S4224 C2 143

ID S4224 D(R/L)2 142

ID S4224 E2 148

ID S4224 K2 147

ID S4230 A2 141

ID S4230 B2 140

ID S4230 C2 143

ID S4230 D(R/L)2 142

ID S4230 E2 148

ID S4230 K2 147

ID S42DS K2 147

ID S4824 A2 141

ID S4824 B2 140

ID S4824 C2 143

ID S4824 D(R/L)2 142

ID S4824 E2 148

ID S4824 K2 147

ID S4830 A2 141

ID S4830 B2 140

ID S4830 C2 143

ID S4830 D(R/L)2 142

ID S4830 E2 148

ID S4830 K2 147

ID S4830 T2 144

ID S4836 T2 144

ID S48DK A2 146

ID S48DK B2 146

ID S48DS A2 145

ID S48DS B2 145

ID S48DS D2 145

ID S48DS K2 147

ID S6024 A2 141

ID S6024 B2 140

ID S6024 C2 143

ID S6024 D(R/L)2 142

ID S6024 E2 148

ID S6024 K2 147

pattern no. page

ID S6030 A2 141

ID S6030 B2 140

ID S6030 C2 143

ID S6030 D(R/L)2 142

ID S6030 E2 148

ID S6030 K2 147

ID S6030 T2 144

ID S6036 T2 144

ID S7224 A2 141

ID S7224 B2 140

ID S7230 A2 141

ID S7230 B2 140

ID S7230 T2 144

ID S7236 T2 144

ID U6330 T2 144

ID U6636 T2 144

ID U7530 T2 144

ID U7836 T2 144

IE C3624 E2 128

IE C4224 A2 121

IE C4224 B2 120

IE C4224 D2 122

IE C4224 E2 128

IE C4224 K2 127

IE C42SK A2 126

IE C42SK B2 126

IE C4824 A2 121

IE C4824 B2 120

IE C4824 D2 122

IE C4824 E2 128

IE C4824 K2 127

IE C4830 A2 121

IE C4830 B2 120

IE C4830 D2 122

IE C4830 E2 128

IE C4830 K2 127

IE C48DK A2 126

IE C48DK B2 126

IE C48DS A2 125

IE C48DS B2 125

IE C48DS D2 125

IE C48DS E2 128

IE C48DS K2 127

IE C48SK A2 126

IE C48SK B2 126

IE C48SS A2 125

IE C48SS B2 125

IE C48SS D2 125

IE C48SS E2 128

IE C48SS K2 127

IE R3000 W2 118

IE R3000 W3 119

IE R3000 X2 118

IE R3000 X3 119

IE R3000 Y2 118

IE R3000 Y3 119

IE R3600 W2 118

IE R3600 W3 119

IE R3600 X2 118

IE R3600 X3 119

IE R3600 Y2 118

IE R3600 Y3 119

IE R4200 W2 118

IE R4200 W3 119

IE R4200 X2 118

Knoll Office Tables

240

pattern no. page

IE R4200 X3 119

IE R4200 Y2 118

IE R4200 Y3 119

IE R4800 X2 118

IE R4800 X3 119

IE R4800 Y2 118

IE R4800 Y3 119

IE S3024 A2 121

IE S3024 B2 120

IE S3024 C2 123

IE S3024 D(R/L)2 122

IE S3024 E2 128

IE S3024 K2 127

IE S3030 A2 121

IE S3030 B2 120

IE S3030 C2 123

IE S3030 D(R/L)2 122

IE S3030 E2 128

IE S3030 K2 127

IE S3624 A2 121

IE S3624 B2 120

IE S3624 C2 123

IE S3624 D(R/L)2 122

IE S3624 E2 128

IE S3624 K2 127

IE S3630 A2 121

IE S3630 B2 120

IE S3630 C2 123

IE S3630 D(R/L)2 122

IE S3630 E2 128

IE S3630 K2 127

IE S36DK A2 126

IE S36DK B2 126

IE S36DS A2 125

IE S36DS B2 125

IE S36DS D2 125

IE S4224 A2 121

IE S4224 B2 120

IE S4224 C2 123

IE S4224 D(R/L)2 122

IE S4224 E2 128

IE S4224 K2 127

IE S4230 A2 121

IE S4230 B2 120

IE S4230 C2 123

IE S4230 D(R/L)2 122

IE S4230 E2 128

IE S4230 K2 127

IE S42DS K2 127

IE S4824 A2 121

IE S4824 B2 120

IE S4824 C2 123

IE S4824 D(R/L)2 122

IE S4824 E2 128

IE S4824 K2 127

IE S4830 A2 121

IE S4830 B2 120

IE S4830 C2 123

IE S4830 D(R/L)2 122

IE S4830 E2 128

IE S4830 K2 127

IE S4830 T2 124

IE S4836 T2 124

IE S48DK A2 126

IE S48DK B2 126

pattern no. page

IE S48DS A2 125

IE S48DS B2 125

IE S48DS D2 125

IE S48DS K2 127

IE S6024 A2 121

IE S6024 B2 120

IE S6024 C2 123

IE S6024 D(R/L)2 122

IE S6024 E2 128

IE S6024 K2 127

IE S6030 A2 121

IE S6030 B2 120

IE S6030 C2 123

IE S6030 D(R/L)2 122

IE S6030 E2 128

IE S6030 K2 127

IE S6030 T2 124

IE S6036 T2 124

IE S7224 A2 121

IE S7224 B2 120

IE S7230 A2 121

IE S7230 B2 120

IE S7230 T2 124

IE S7236 T2 124

IE U6330 T2 124

IE U6636 T2 124

IE U7530 T2 124

IE U7836 T2 124

IEC2 158

IFP30 159

IFP36 159

IFP42 159

IFP48 159

IFP60 159

IN C3624 E 117

IN C4224 A 110

IN C4224 B 109

IN C4224 D 111

IN C4224 E 117

IN C4224 K 116

IN C42SK A 115

IN C42SK B 115

IN C4824 A 110

IN C4824 B 109

IN C4824 D 111

IN C4824 E 117

IN C4824 K 116

IN C4830 A 110

IN C4830 B 109

IN C4830 D 111

IN C4830 E 117

IN C4830 K 116

IN C48DK A 115

IN C48DK B 115

IN C48DS A 114

IN C48DS B 114

IN C48DS D 114

IN C48DS E 117

IN C48DS K 116

IN C48SK A 115

IN C48SK B 115

IN C48SS A 114

IN C48SS B 114

IN C48SS D 114

IN C48SS E 117

pattern no. page

IN C48SS K 116

IN R3000 W 108

IN R3000 X 108

IN R3000 Y 108

IN R3600 W 108

IN R3600 X 108

IN R3600 Y 108

IN R4200 W 108

IN R4200 X 108

IN R4200 Y 108

IN R4800 X 108

IN R4800 Y 108

IN S3024 A 110

IN S3024 B 109

IN S3024 C 112

IN S3024 D(R/L) 111

IN S3024 E 117

IN S3024 K 116

IN S3030 A 110

IN S3030 B 109

IN S3030 D(R/L) 111

IN S3030 E 117

IN S3030 K 116

IN S3030C 112

IN S3624 A 110

IN S3624 B 109

IN S3624 C 112

IN S3624 D(R/L) 111

IN S3624 E 117

IN S3624 K 116

IN S3630 A 110

IN S3630 B 109

IN S3630 C 112

IN S3630 D(R/L) 111

IN S3630 E 117

IN S3630 K 116

IN S36DK A 115

IN S36DK B 115

IN S36DS A 114

IN S36DS B 114

IN S36DS D 114

IN S36DS K 116

IN S4224 A 110

IN S4224 B 109

IN S4224 C 112

IN S4224 D(R/L) 111

IN S4224 E 117

IN S4224 K 116

IN S4230 A 110

IN S4230 B 109

IN S4230 C 112

IN S4230 D(R/L) 111

IN S4230 E 117

IN S4230 K 116

IN S42DK A 115

IN S42DK B 115

IN S42DS A 114

IN S42DS B 114

IN S42DS D 114

IN S42DS K 116

IN S4824 A 110

IN S4824 B 109

IN S4824 C 112

IN S4824 D(R/L) 111

IN S4824 E 117

pattern no. page

IN S4824 K 116

IN S4830 A 110

IN S4830 B 109

IN S4830 C 112

IN S4830 D(R/L) 111

IN S4830 E 117

IN S4830 K 116

IN S4830T 113

IN S4836T 113

IN S48DK A 115

IN S48DK B 115

IN S48DS A 114

IN S48DS B 114

IN S48DS D 114

IN S48DS K 116

IN S6024 A 110

IN S6024 B 109

IN S6024 C 112

IN S6024 D(R/L) 111

IN S6024 E 117

IN S6024 K 116

IN S6030 A 110

IN S6030 B 109

IN S6030 C 112

IN S6030 D(R/L) 111

IN S6030 E 117

IN S6030 K 116

IN S6030T 113

IN S6036T 113

IN S7230T 113

IN S7236T 113

IN U6330T 113

IN U6636T 113

IN U7530T 113

IN U7836T 113

IS C3624 E 138

IS C4224 A 131

IS C4224 B 130

IS C4224 D 132

IS C4224 E 138

IS C4224 K 137

IS C42SK A 136

IS C42SK B 136

IS C4824 A 131

IS C4824 B 130

IS C4824 D 132

IS C4824 E 138

IS C4824 K 137

IS C4830 A 131

IS C4830 B 130

IS C4830 D 132

IS C4830 E 138

IS C4830 K 137

IS C48DK A 136

IS C48DK B 136

IS C48DS A 135

IS C48DS B 135

IS C48DS D 135

IS C48DS E 138

IS C48DS K 137

IS C48SK A 136

IS C48SK B 136

IS C48SS A 135

IS C48SS B 135

IS C48SS D 135

Knoll Office Tables

241

pattern no. page

IS C48SS E 138

IS C48SS K 137

IS R3000 W 129

IS R3000 X 129

IS R3000 Y 129

IS R3600 W 129

IS R3600 X 129

IS R3600 Y 129

IS R4200 W 129

IS R4200 X 129

IS R4200 Y 129

IS R4800 X 129

IS R4800 Y 129

IS S3024 A 131

IS S3024 B 130

IS S3024 C 133

IS S3024 D(L/R) 132

IS S3024 E 138

IS S3024 K 137

IS S3030 A 131

IS S3030 B 130

IS S3030 C 133

IS S3030 D(L/R) 132

IS S3030 E 138

IS S3030 K 137

IS S3624 A 131

IS S3624 B 130

IS S3624 C 133

IS S3624 D(L/R) 132

IS S3624 E 138

IS S3624 K 137

IS S3630 A 131

IS S3630 B 130

IS S3630 C 133

IS S3630 D(L/R) 132

IS S3630 E 138

IS S3630 K 137

IS S36DK A 136

IS S36DK B 136

IS S36DS A 135

IS S36DS B 135

IS S36DS D 135

IS S36DS K 137

IS S4224 A 131

IS S4224 B 130

IS S4224 C 133

IS S4224 D(L/R) 132

IS S4224 E 138

IS S4224 K 137

IS S4230 A 131

IS S4230 B 130

IS S4230 C 133

IS S4230 D(L/R) 132

IS S4230 E 138

IS S4230 K 137

IS S42DK A 136

IS S42DK B 136

IS S42DS A 135

IS S42DS B 135

IS S42DS D 135

IS S42DS K 137

IS S4824 A 131

IS S4824 B 130

IS S4824 C 133

IS S4824 D(L/R) 132

pattern no. page

IS S4824 E 138

IS S4824 K 137

IS S4830 A 131

IS S4830 B 130

IS S4830 C 133

IS S4830 D(L/R) 132

IS S4830 E 138

IS S4830 K 137

IS S4830 T 134

IS S4836 T 134

IS S48DK A 136

IS S48DK B 136

IS S48DS A 135

IS S48DS B 135

IS S48DS D 135

IS S48DS K 137

IS S6024 A 131

IS S6024 B 130

IS S6024 C 133

IS S6024 D(L/R) 132

IS S6024 E 138

IS S6024 K 137

IS S6030 A 131

IS S6030 B 130

IS S6030 C 133

IS S6030 D(L/R) 132

IS S6030 E 138

IS S6030 K 137

IS S6030 T 134

IS S6036 T 134

IS S7230 T 134

IS S7236 T 134

IS U6330 T 134

IS U6636 T 134

IS U7530 T 134

IS U7836 T 134

IT A4860 Z 107

IT A6060 Z 106

IT B4848 A 103

IT B4848 B 103

IT B4848 C 103

IT B4848 D 103

IT B6060 A 103

IT B6060 B 103

IT B6060 C 103

IT B6060 D 103

IT C3624C 104

IT C36SSC 104

IT C4224C 104

IT C42SSC 104

IT C4824C 104

IT C4830C 104

IT C48DSC 104

IT C48SSC 104

IT D3624 W 100

IT D3624 X 100

IT D3624 Y 100

IT D4230 W 100

IT D4230 X 100

IT D4230 Y 100

IT E3030 W 102

IT E3030 X 102

IT E3636 W 102

IT E3636 X 102

IT E4242 W 102

pattern no. page

IT E4242 X 102

IT H5424 A 103

IT H5424 B 103

IT H5424 C 103

IT H5424 D 103

IT O7236 N 107

IT O7236 T 106

IT O8436 T 106

IT O9636 N 107

IT R3000 W 100

IT R3000 X 100

IT R3000 Y 100

IT R3600 W 100

IT R3600 X 100

IT R3600 Y 100

IT R4200 W 100

IT R4200 X 100

IT R4200 Y 100

IT R4800 X 100

IT R4800 Y 100

IT R6000 Z 106

IT S3030 W 102

IT S3030 X 102

IT S3030 Y 102

IT S30DSC 104

IT S3636 W 102

IT S3636 X 102

IT S3636 Y 102

IT S36DSC 104

IT S36DSCM 105

IT S3ODSCM 105

IT S4242 W 102

IT S4242 X 102

IT S4242 Y 102

IT S42DSC 104

IT S42DSCM 105

IT S48DSC 104

IT S48DSCM 105

IT T3618 W 101

IT T3618 X 101

IT T3618 Y 101

IT T4221 W 101

IT T4221 X 101

IT T4221 Y 101

IWM30 159

IWM36 159

IWM42 159

IWM48 159

IWM60 159

IXG 159

MM2-CG 211

MZ1-B3015 213

MZ1-B3019 213

MZ1-B3022 213

MZ1-B3615 213

MZ1-B3619 213

MZ1-B3622 213

MZ1-B4215 213

MZ1-B4219 213

MZ1-B4222 213

MZ1-B4815 213

MZ1-B4819 213

MZ1-B4822 213

MZ1-B5415 213

MZ1-B5419 213

pattern no. page

MZ1-B5422 213

MZ1-B6015 213

MZ1-B6019 213

MZ1-B6022 213

MZ1-B6615 213

MZ1-B6619 213

MZ1-B6622 213

MZ1-B7215 213

MZ1-B7219 213

MZ1-B7222 213

MZ1-B7815 213

MZ1-B7819 213

MZ1-B7822 213

MZ1-V3615 214

MZ1-V3619 214

MZ1-V3622 214

MZ1-V4215 214

MZ1-V4219 214

MZ1-V4222 214

MZ1-V4815 214

MZ1-V4819 214

MZ1-V4822 214

MZ1-V6015 214

MZ1-V6019 214

MZ1-V6022 214

MZ1-V7215 214

MZ1-V7219 214

MZ1-V7222 214

NG 89, 90

NTCT 7236 90

NTCT 8442 90

NTCT 9648 90

NTMT 36 89

NTMT 42 89

NTMT 48 89

RCB 82

RCB20T 82

RCB24T 82

RCB24X 83

RCB28X 83

RCB30T 82

RCB36X 83

RCB40T 82

RCBDH24X 86

RCBDH28X 86

RCBDH36X 86

RCDHB 85

RCDHB20T 85

RCDHB24T 85

RCDHB30T 85

RCDHB40T 85

RIB24T 82

RIB28X 83

RIB32X 83

RIBDH24T 85

RIBDH28X 85

RIBDH32X 85

RRA12036 74

RRA12042 74

RRA12048 74

RRA14442 74

RRA14448 74

RRA16842 74

RRA16848 74

RRA19242 74

Knoll Office Tables

242

pattern no. page

RRA19248 74

RRA3636 74

RRA4242 74

RRA4848 74

RRA6060 74

RRA7230 74

RRA7236 74

RRA7272 74

RRA8430 74

RRA8436 74

RRA8442 74

RRA9630 74

RRA9636 74

RRA9642 74

RRA9648 74

RRA(A/B/C/D/E/F/G)12036-(1/2/3) 81

RRA(A/B/C/D/E/F/G)12042-(1/2/3) 81

RRA(A/B/C/D/E/F/G)12048-(1/2/3) 81

RRA(A/B/C/D/E/F/G)14442-(1/2/3) 81

RRA(A/B/C/D/E/F/G)14448-(1/2/3) 81

RRA(A/B/C/D/E/F/G)16842-(1/2/3) 81

RRA(A/B/C/D/E/F/G)16848-(1/2/3) 81

RRA(A/B/C/D/E/F/G)19242-(1/2/3) 81

RRA(A/B/C/D/E/F/G)19248-(1/2/3) 81

RRA(A/B/C/D/E/F/G)3636-(1/2/3) 81

RRA(A/B/C/D/E/F/G)4242-(1/2/3) 81

RRA(A/B/C/D/E/F/G)4848-(1/2/3) 81

RRA(A/B/C/D/E/F/G)6060-(1/2/3) 81

RRA(A/B/C/D/E/F/G)7230-(1/2/3) 81

RRA(A/B/C/D/E/F/G)7236-(1/2/3) 81

RRA(A/B/C/D/E/F/G)7272-(1/2/3) 81

RRA(A/B/C/D/E/F/G)8430-(1/2/3) 81

RRA(A/B/C/D/E/F/G)8436-(1/2/3) 81

RRA(A/B/C/D/E/F/G)8442-(1/2/3) 81

RRA(A/B/C/D/E/F/G)9630-(1/2/3) 81

RRA(A/B/C/D/E/F/G)9636-(1/2/3) 81

RRA(A/B/C/D/E/F/G)9642-(1/2/3) 81

RRAW12036-(1/2/3) 79

RRAW12042-(1/2/3) 79

RRAW14442-(1/2/3) 79

RRAW16842-(1/2/3) 79

RRAW19242-(1/2/3) 79

RRAW3636-(1/2/3) 79

RRAW4242-(1/2/3) 79

RRAW6060-(1/2/3) 79

RRAW7230-(1/2/3) 79

RRAW7236-(1/2/3) 79

RRAW7272-(1/2/3) 79

RRAW8430-(1/2/3) 79

RRAW8436-(1/2/3) 79

RRAW8442-(1/2/3) 79

RRAW9630-(1/2/3) 79

RRAW9636-(1/2/3) 79

RRAW9642-(1/2/3) 79

RRB12036 75

RRB12042 75

RRB12048 75

RRB14442 75

RRB14448 75

RRB16842 75

RRB16848 75

RRB19242 75

RRB19248 75

RRB3636 75

RRB4242 75

pattern no. page

RRB4848 75

RRB6060 75

RRB7230 75

RRB7236 75

RRB7272 75

RRB8430 75

RRB8436 75

RRB8442 75

RRB9630 75

RRB9636 75

RRB9642 75

RRB9648 75

RSC 82

RSC4 82

RSD1427 82, 84

RSD1827 82, 84

RSD2027 82, 84

RSD2427 82, 84

RSD3027 82, 84

RSDHC 85

RSDHC4 85

RSDHD1428 86, 87

RSDHD1828 86, 87

RSDHD2028 86, 87

RSDHD2428 86, 87

RSDHD3028 86, 87

RSDHL12 87

RSDHL15 87

RSDHL20 87

RSDHL24 87

RSDHL30 87

RSDHL36 87

RSDHL42 87

RSDHL48 87

RSDHT1 87

RSDHT2 87

RSDHT3 87

RSDHT4 87

RSDHT5 87

RSDHT6 87

RSL12 84

RSL15 84

RSL20 84

RSL24 84

RSL30 84

RSL36 84

RSL42 84

RSL48 84

RST1 84

RST2 84

RST3 84

RST4 84

RST5 84

RST6 84

RTA12036 76

RTA12042 76

RTA12048 76

RTA14442 76

RTA14448 76

RTA16842 76

RTA16848 76

RTA19242 76

RTA19248 76

RTA3636 76

RTA4242 76

pattern no. page

RTA4848 76

RTA6060 76

RTA7230 76

RTA7236 76

RTA7272 76

RTA8430 76

RTA8436 76

RTA8442 76

RTA9630 76

RTA9636 76

RTA9642 76

RTA9648 76

RTA(A/B/C/D/E/F/G)12036-(1/2/3) 80

RTA(A/B/C/D/E/F/G)12042-(1/2/3) 80

RTA(A/B/C/D/E/F/G)12048-(1/2/3) 80

RTA(A/B/C/D/E/F/G)14442-(1/2/3) 80

RTA(A/B/C/D/E/F/G)14448-(1/2/3) 80

RTA(A/B/C/D/E/F/G)16842-(1/2/3) 80

RTA(A/B/C/D/E/F/G)16848-(1/2/3) 80

RTA(A/B/C/D/E/F/G)19242-(1/2/3) 80

RTA(A/B/C/D/E/F/G)19248-(1/2/3) 80

RTA(A/B/C/D/E/F/G)3636-(1/2/3) 80

RTA(A/B/C/D/E/F/G)4242-(1/2/3) 80

RTA(A/B/C/D/E/F/G)4848-(1/2/3) 80

RTA(A/B/C/D/E/F/G)6060-(1/2/3) 80

RTA(A/B/C/D/E/F/G)7230-(1/2/3) 80

RTA(A/B/C/D/E/F/G)7236-(1/2/3) 80

RTA(A/B/C/D/E/F/G)7272-(1/2/3) 80

RTA(A/B/C/D/E/F/G)8430-(1/2/3) 80

RTA(A/B/C/D/E/F/G)8436-(1/2/3) 80

RTA(A/B/C/D/E/F/G)8442-(1/2/3) 80

RTA(A/B/C/D/E/F/G)9630-(1/2/3) 80

RTA(A/B/C/D/E/F/G)9636-(1/2/3) 80

RTA(A/B/C/D/E/F/G)9642-(1/2/3) 80

RTAW12036-(1/2/3) 78

RTAW12042-(1/2/3) 78

RTAW14442-(1/2/3) 78

RTAW16842-(1/2/3) 78

RTAW19242-(1/2/3) 78

RTAW3636-(1/2/3) 78

RTAW4242-(1/2/3) 78

RTAW6060-(1/2/3) 78

RTAW7230-(1/2/3) 78

RTAW7236-(1/2/3) 78

RTAW7272-(1/2/3) 78

RTAW8430-(1/2/3) 78

RTAW8436-(1/2/3) 78

RTAW8442-(1/2/3) 78

RTAW9630-(1/2/3) 78

RTAW9636-(1/2/3) 78

RTAW9642-(1/2/3) 78

RTB12036 77

RTB12042 77

RTB12048 77

RTB14442 77

RTB14448 77

RTB16842 77

RTB16848 77

RTB19242 77

RTB19248 77

RTB3636 77

RTB4242 77

RTB4848 77

RTB6060 77

RTB7230 77

pattern no. page

RTB7236 77

RTB7272 77

RTB8430 77

RTB8436 77

RTB8442 77

RTB9630 77

RTB9636 77

RTB9642 77

RTB9648 77

XAUA 1248G 67

XAUA 1260G 67

XAUA 1272G 67

XT1DS4505 58

XT1DS5705 58

XT1DS6905 58

XT1LS4509 58

XT1LS5709 58

XT1LS6909 58

XT1SA24 58

XT1SA30 58

XT1SA36 58

XT1SA42 58

XT1SA48 58

XT1SA54 58

XT1SA60 58

XT1SA66 58

XT1SA72 58

XTB1 BAS 24D10CF 25

XTB1 BAS 24D12CF 25

XTB1 BAS 24D15CF 25

XTB1 BAS 24D15SF 25

XTB1 BAS 24D18SF 25

XTB1 BAS 24D20SF 25

XTB1 BAS 24D24SF 25

XTB1 BAS 24D25SF 25

XTB1 BAS 24S10CF 26

XTB1 BAS 24S12CF 26

XTB1 BAS 24S15CF 26

XTB1 BAS 24S15SF 26

XTB1 BAS 24S18SF 26

XTB1 BAS 24S20SF 26

XTB1 BAS 24S24SF 26

XTB1 BAS 24S25SF 26

XTB1 BAS 30D10CA 29

XTB1 BAS 30D10CF 27

XTB1 BAS 30D12CA 29

XTB1 BAS 30D12CF 27

XTB1 BAS 30D15CA 29

XTB1 BAS 30D15CF 27

XTB1 BAS 30D15SA 29

XTB1 BAS 30D15SF 27

XTB1 BAS 30D18SA 29

XTB1 BAS 30D18SF 27

XTB1 BAS 30D20SA 29

XTB1 BAS 30D20SF 27

XTB1 BAS 30D24CA 29

XTB1 BAS 30D24CF 27

XTB1 BAS 30D25CA 29

XTB1 BAS 30D25CF 27

XTB1 BAS 30S10CA 30

XTB1 BAS 30S10CF 28

XTB1 BAS 30S12CA 30

XTB1 BAS 30S12CF 28

XTB1 BAS 30S15CA 30

XTB1 BAS 30S15CF 28

Knoll Office Tables

243

pattern no. page

XTB1 BAS 30S15SA 30

XTB1 BAS 30S15SF 28

XTB1 BAS 30S18SA 30

XTB1 BAS 30S18SF 28

XTB1 BAS 30S20SA 30

XTB1 BAS 30S20SF 28

XTB1 BAS 30S24SA 30

XTB1 BAS 30S24SF 28

XTB1 BAS 30S25SA 30

XTB1 BAS 30S25SF 28

XTB1 BAS 36D10CA 33

XTB1 BAS 36D10CF 31

XTB1 BAS 36D12CA 33

XTB1 BAS 36D12CF 31

XTB1 BAS 36D15CA 33

XTB1 BAS 36D15CF 31

XTB1 BAS 36D15SA 33

XTB1 BAS 36D15SF 31

XTB1 BAS 36D18SA 33

XTB1 BAS 36D18SF 31

XTB1 BAS 36D20SA 33

XTB1 BAS 36D20SF 31

XTB1 BAS 36D24CA 33

XTB1 BAS 36D24CF 31

XTB1 BAS 36D25CA 33

XTB1 BAS 36D25CF 31

XTB1 BAS 36S10CA 34

XTB1 BAS 36S10CF 32

XTB1 BAS 36S12CA 34

XTB1 BAS 36S12CF 32

XTB1 BAS 36S15CA 34

XTB1 BAS 36S15CF 32

XTB1 BAS 36S15SA 34

XTB1 BAS 36S15SF 32

XTB1 BAS 36S18SA 34

XTB1 BAS 36S18SF 32

XTB1 BAS 36S20SA 34

XTB1 BAS 36S20SF 32

XTB1 BAS 36S24SA 34

XTB1 BAS 36S24SF 32

XTB1 BAS 36S25SA 34

XTB1 BAS 36S25SF 32

XTB1 SLIK 39

XTB1 SLIK30 39

XTB1 SLIK36 39

XTB1AC 45

XTB1AC24 45

XTB1ACEND 46

XTB1DB10C 37

XTB1DB10E 37

XTB1DB12C 37

XTB1DB12E 37

XTB1DB15C 37

XTB1DB15E 37

XTB1DB4E 37

XTB1DB5C 37

XTB1DB5E 37

XTB1DB6C 37

XTB1DB6E 37

XTB1DB8C 37

XTB1DB8E 37

XTB1EDD24 39

XTB1EDD30 39

XTB1EDD36 39

XTB1EP1DD24 43

pattern no. page

XTB1EP1DD24P 42

XTB1EP1DD30 43

XTB1EP1DD30P 42

XTB1EP1DD36 43

XTB1EP1DD36P 42

XTB1EP1LD24 43

XTB1EP1LD24P 42

XTB1EP1LD30 43

XTB1EP1LD30P 42

XTB1EP1LD36 43

XTB1EP1LD36P 42

XTB1EP1RD24 43

XTB1EP1RD24P 42

XTB1EP1RD30 43

XTB1EP1RD30P 42

XTB1EP1RD36 43

XTB1EP1RD36P 42

XTB1EP2DD24 43

XTB1EP2DD24P 42

XTB1EP2DD30 43

XTB1EP2DD30P 42

XTB1EP2DD36 43

XTB1EP2DD36P 42

XTB1EP2SD24 43

XTB1EP2SD24P 42

XTB1EP2SD30 43

XTB1EP2SD30P 42

XTB1EP2SD36 43

XTB1EP2SD36P 42

XTB1ESD24 41

XTB1ESD30 41

XTB1ESD36 41

XTB1FC 45

XTB1FC24 45

XTB1FCEND 46

XTB1LP 46

XTB1MB 45

XTB1RAK 54

XTB1SB10C 38

XTB1SB10E 38

XTB1SB12C 38

XTB1SB12E 38

XTB1SB15C 38

XTB1SB15E 38

XTB1SB4E 38

XTB1SB5C 38

XTB1SB5E 38

XTB1SB6C 38

XTB1SB6E 38

XTB1SB8C 38

XTB1SB8E 38

XTB1T24 44

XTB1TB10C 36

XTB1TB10E 36

XTB1TB12C 36

XTB1TB12E 36

XTB1TB15C 36

XTB1TB15E 36

XTB1TB4E 36

XTB1TB5C 36

XTB1TB5E 36

XTB1TB6C 36

XTB1TB6E 36

XTB1TB8C 36

XTB1TB8E 36

pattern no. page

XTB1XD30 44

XTB1XD30N 44

XTB1XD36 44

XTB1XD36N 44

XTB1XDD24 39

XTB1XDD30 39

XTB1XDD36 39

XTB1XS30 44

XTB1XS30N 44

XTB1XS36 44

XTB1XS36N 44

XTB1YDD24 40

XTB1YDD30 40

XTB1YDD36 40

XTB2LDD 39

XTB2LDD24 39

XTB2LSD 41

XTB2LSD24 41

XTBT18 55

XTBT24 55

XTBT36 55

XTBT48 55

XTBT60 55

XTC1 120 AA 35

XTC1 144 AA 35

XTC1 48 35

XTC1 60 35

XTC1 72 35

XTC1 96 35

XTC1 END 35

XTCA1 120 AA 35

XTCA1 144 AA 35

XTCA1 48 35

XTCA1 60 35

XTCA1 72 35

XTCA1 96 35

XTCF 48 35

XTCF 60 35

XTCF 72 35

XTCS1 4714 56

XTCS1 4714F 57

XTCS1 4721 56

XTCS1 4721F 57

XTCS1 4814 56

XTCS1 4814F 57

XTCS1 4821 56

XTCS1 4821F 57

XTCS1 5914 56

XTCS1 5914F 57

XTCS1 5921 56

XTCS1 5921F 57

XTCS1 6014 56

XTCS1 6014F 57

XTCS1 6021 56

XTCS1 6021F 57

XTCS1 7114 56

XTCS1 7114F 57

XTCS1 7121 56

XTCS1 7121F 57

XTCS1 7214 56

XTCS1 7214F 57

XTCS1 7221 56

XTCS1 7221F 57

XTCS1 SBA 58

XTCT6030D 54

pattern no. page

XTCT6030LD 54

XTCT6036D 54

XTCT6036LD 54

XTCT7230D 54

XTCT7230LD 54

XTCT7236D 54

XTCT7236LD 54

XTDT42 54

XTDTX42 54

XTES1 2414 65

XTES1 2414F 66

XTES1 2421 65

XTES1 2421F 66

XTES1 3014 65

XTES1 3014F 66

XTES1 3021 65

XTES1 3021F 66

XTES1 3614 65

XTES1 3614F 66

XTES1 3621 65

XTES1 3621F 66

XTES1 4814 63

XTES1 4814F 64

XTES1 4821 63

XTES1 4821F 64

XTES1 6014 63

XTES1 6014F 64

XTES1 6021 63

XTES1 6021F 64

XTES1 7214 63

XTES1 7214F 64

XTES1 7221 63

XTES1 7221F 64

XTPS1MZKIT 68

XTR1BCC50 54

XTR1D1 52

XTR1D2 52

XTR1D3 52

XTR1D4 52

XTR1DA 48, 50

XTR1DB 48, 50

XTR1DC 50

XTR1DXO 48, 50

XTR1DYO 48, 50

XTR1DZO 50

XTR1E30D 47

XTR1E30S 47

XTR1E424D 47

XTR1E424S 47

XTR1ECPM 48

XTR1EE 47, 49, 53

XTR1EJ18 48

XTR1EJ30 48

XTR1EJ42 48

XTR1EPH 48

XTR1EPI 48

XTR1FE 47, 49, 53

XTR1H30D 53

XTR1OF 48, 50, 53

XTR1PDCX 48, 50

XTR1T30D 49

XTR1T30S 49

XTR1T424D 49

XTR1T424S 49

XTR1TCC25 54

Knoll Office Tables

244

pattern no. page

XTR1TCPM 50

XTR1TJ18 50

XTR1TJ30 50

XTR1TJ42 50

XTR1TPH 50

XTR1TPI 50

XTR1X30D 51

XTR1X30S 51

XTR1X424D 51

XTR1X424S 51

XTR1XCPM 52

XTR1XJ18 52

XTR1XJ30 52

XTR1XJ42 52

XTR1XPH 52

XTR1XPI 52

XTRS1 5414 61

XTRS1 5414F 62

XTRS1 5421 61

XTRS1 5421F 62

XTRS1 6014 61

XTRS1 6014F 62

XTRS1 6021 61

XTRS1 6021F 62

XTRS1 6614 61

XTRS1 6614F 62

XTRS1 6621 61

XTRS1 6621F 62

XTRS1 7214 61

XTRS1 7214F 62

XTRS1 7221 61

XTRS1 7221F 62

XTRS1 7814 61

XTRS1 7814F 62

XTRS1 7821 61

XTRS1 7821F 62

XTSM1C 63, 64

XTSM1K 59, 60

XTSM1KC 65, 66

XTSM1KK 63, 64

XTSM1P 59, 60, 61, 62, 63, 64

XTSM1PC 65, 66

XTSM1S 59, 60, 61, 62, 63, 64

XTSM1SC 65, 66

XTSM1SLAT 63, 64

XTSS1 2414 59

XTSS1 2414F 60

XTSS1 2421 59

XTSS1 2421F 60

XTSS1 3014 59

XTSS1 3014F 60

XTSS1 3021 59

XTSS1 3021F 60

XTSS1 3614 59

XTSS1 3614F 60

XTSS1 3621 59

XTSS1 3621F 60

XTTK3018F (L/M/1/2/3) 24

XTTK3036F (L/M/1/2/3) 24

XTTK3618F (L/M/1/2/3) 24

XTTK3636F (L/M/1/2/3) 24

XTTK4218F (L/M/1/2/3) 24

XTTK4236F (L/M/1/2/3) 24

XTTK4824A (L/M/1/2/3) 18

XTTK4824C (L/M/1/2/3) 20

pattern no. page

XTTK4824E (L/M/1/2/3) 21

XTTK4824U (L/M/1/2/3) 19

XTTK4830A (L/M/1/2/3) 18

XTTK4830C (L/M/1/2/3) 20

XTTK4830E (L/M/1/2/3) 21

XTTK4830U (L/M/1/2/3) 19

XTTK4836A (L/M/1/2/3) 18

XTTK4836C (L/M/1/2/3) 20

XTTK4836D (L/M/1/2/3) 22

XTTK4836E (L/M/1/2/3) 22

XTTK4836U (L/M/1/2/3) 19

XTTK6018F (L/M/1/2/3) 24

XTTK6024A (L/M/1/2/3) 18

XTTK6024C (L/M/1/2/3) 20

XTTK6024E (L/M/1/2/3) 21

XTTK6024U (L/M/1/2/3) 19

XTTK6030A (L/M/1/2/3) 18

XTTK6030C (L/M/1/2/3) 20

XTTK6030E (L/M/1/2/3) 21

XTTK6030U (L/M/1/2/3) 19

XTTK6036A (L/M/1/2/3) 18

XTTK6036C (L/M/1/2/3) 20

XTTK6036D (L/M/1/2/3) 22

XTTK6036E (L/M/1/2/3) 22

XTTK6036F (L/M/1/2/3) 24

XTTK6036U (L/M/1/2/3) 19

XTTK7218F (L/M/1/2/3) 24

XTTK7224A (L/M/1/2/3) 18

XTTK7224C (L/M/1/2/3) 20

XTTK7224E (L/M/1/2/3) 21

XTTK7224U (L/M/1/2/3) 19

XTTK7230A (L/M/1/2/3) 18

XTTK7230C (L/M/1/2/3) 20

XTTK7230E (L/M/1/2/3) 21

XTTK7230U (L/M/1/2/3) 19

XTTK7236A (L/M/1/2/3) 18

XTTK7236C (L/M/1/2/3) 20

XTTK7236D (L/M/1/2/3) 22

XTTK7236E (L/M/1/2/3) 22

XTTK7236F (L/M/1/2/3) 24

XTTK7236U (L/M/1/2/3) 19

XTTK8418F (L/M/1/2/3) 24

XTTK8436F (L/M/1/2/3) 24

XTTK9624A (L/M/1/2/3) 18

XTTK9624C (L/M/1/2/3) 20

XTTK9624U (L/M/1/2/3) 19

XTTK9630A (L/M/1/2/3) 18

XTTK9630C (L/M/1/2/3) 20

XTTK9630U (L/M/1/2/3) 19

XTTK9636A (L/M/1/2/3) 18

XTTK9636C (L/M/1/2/3) 20

XTTK9636U (L/M/1/2/3) 19

XTTP3018F (L) 24

XTTP3618F (L) 24

XTTP4218F (L) 24

XTTP4824A (L) 18

XTTP4824B (L) 19

XTTP4824C (L) 20

XTTP4824E (L) 21

XTTP4830A (L) 18

XTTP4830B (L) 19

XTTP4830C (L) 20

XTTP4830E (L) 21

XTTP4836A (L) 18

XTTP4836B (L) 19

pattern no. page

XTTP4836C (L) 20

XTTP4836D (L) 23

XTTP4836E (L) 23

XTTP6024A (L) 18

XTTP6024B (L) 19

XTTP6024C (L) 20

XTTP6024E (L) 21

XTTP6030A (L) 18

XTTP6030B (L) 19

XTTP6030C (L) 20

XTTP6030E (L) 21

XTTP6036A (L) 18

XTTP6036B (L) 19

XTTP6036C (L) 20

XTTP6036D (L) 23

XTTP6036E (L) 23

XTTP7224A (L) 18

XTTP7224B (L) 19

XTTP7224C (L) 20

XTTP7224E (L) 21

XTTP7230A (L) 18

XTTP7230B (L) 19

XTTP7230C (L) 20

XTTP7230E (L) 21

XTTP7236A (L) 18

XTTP7236B (L) 19

XTTP7236C (L) 20

XTTP7236D (L) 23

XTTP7236E (L) 23

XTTP9624A (L) 18

XTTP9624B (L) 19

XTTP9624C (L) 20

XTTP9630A (L) 18

XTTP9630B (L) 19

XTTP9630C (L) 20

XTTP9636A (L) 18

XTTP9636B (L) 19

XTTP9636C (L) 20

XTTS3018F (1/2/3) 24

XTTS3618F (1/2/3) 24

XTTS4218F (1/2/3) 24

XTTS4824A (1/2/3) 18

XTTS4824C (1/2/3) 20

XTTS4824E (1/2/3) 21

XTTS4824U (1/2/3) 19

XTTS4830A (1/2/3) 18

XTTS4830C (1/2/3) 20

XTTS4830E (1/2/3) 21

XTTS4830U (1/2/3) 19

XTTS4836A (1/2/3) 18

XTTS4836C (1/2/3) 20

XTTS4836D (1/2/3) 22

XTTS4836E (1/2/3) 22

XTTS4836U (1/2/3) 19

XTTS6024A (1/2/3) 18

XTTS6024C (1/2/3) 20

XTTS6024E (1/2/3) 21

XTTS6024U (1/2/3) 19

XTTS6030A (1/2/3) 18

XTTS6030C (1/2/3) 20

XTTS6030E (1/2/3) 21

XTTS6030U (1/2/3) 19

XTTS6036A (1/2/3) 18

XTTS6036C (1/2/3) 20

XTTS6036D (1/2/3) 22

pattern no. page

XTTS6036E (1/2/3) 22

XTTS6036U (1/2/3) 19

XTTS7224A (1/2/3) 18

XTTS7224C (1/2/3) 20

XTTS7224E (1/2/3) 21

XTTS7224U (1/2/3) 19

XTTS7230A (1/2/3) 18

XTTS7230C (1/2/3) 20

XTTS7230E (1/2/3) 21

XTTS7230U (1/2/3) 19

XTTS7236A (1/2/3) 18

XTTS7236C (1/2/3) 20

XTTS7236D (1/2/3) 22

XTTS7236E (1/2/3) 22

XTTS7236U (1/2/3) 19

XTTS9624A (1/2/3) 18

XTTS9624C (1/2/3) 20

XTTS9624U (1/2/3) 19

XTTS9630A (1/2/3) 18

XTTS9630C (1/2/3) 20

XTTS9630U (1/2/3) 19

XTTS9636A (1/2/3) 18

XTTS9636C (1/2/3) 20

XTTS9636U (1/2/3) 19

XTWB120 55

XTWTB 55

XTWTBSLIK 55

XTWTC 55

XTWTX 55

Knoll Office Tables

245

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada aremade only on the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms andconditions. This sale is expressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions mayapply to KnollStudio and KnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by anauthorized representative of Seller. These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence betweenPurchaser and Seller. Written quotations expire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during thatperiod. Where Purchaser and Seller have entered into the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and otherbusiness communications placed or transmitted in accordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signedand shall be valid for all purposes as if they were originated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days afterorder entry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, noother charges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is issued upon shipment. Incase of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder duewithin thirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax andcharges for inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) depositis due at time of order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due priorto shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment inadvance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be addedto the outstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’sfees and costs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited deliveryprograms, may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc.and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing istested for rigorous motion and transportation but is not guaranteed to protect furniture from conditions over which the Seller has no control. If specialpackaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipment and routing. Allshipments shall be tailgate deliveries. Freight for all KnollTextiles orders is prepaid and added to the invoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any specialservices in excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicleand extra, export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for all Knoll Products within the contiguous United States and Canada are F.O.B. Origin. Risk of loss passes to Purchaser at time of deliveryto carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are,or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to make a claim against carrier or notify Seller during theten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. Seller will agree to repairor replace Product damaged in shipment if Purchaser has notified Seller of freight damage within ten (10) working days after receipt and assigns its rightsagainst the carrier.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, includingbut not limited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call CustomerService. All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Productsnot currently offered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition andin the original Seller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requestsa delay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when theorder is ready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, includingdemurrage, preparation for storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to theProduct shall pass to the Purchaser upon delivery of the Product into storage.

Selling Policy

246January 1, 2010

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requestedmaterial to Seller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets anyrequirements of Underwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For adescription of the procedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have noresponsibility for the appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnifyand hold Seller harmless for any damages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship andmaterials, during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use.Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment,Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Equity, Morrison, Reff laminate, Series 2 Storage, Template and othernon-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 Veneer Front Storage, special or customproducts, see below)10 Years: AutoStrada, Crinion Open Table, Reff wood components, Series 2 Veneer Front Storage, Wood Casegoods (Magnusson, The Graham Collection)(except wood casegoods upholstered surfaces, see below), Interaction tables (except height adjustment mechanisms for Counterforce, crank-adjustable, andsplit-top tables and worksurfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor Arm Collection, Adjustable keyboardmechanisms and platforms, Communication Boards (except fabric board textiles, see below), Smokador collection (except leathers, see below), andOrchestra Universal Systems Accessories, Bulldog, Chadwick, Essentials Work Chairs, Generation by Knoll work chair, Life, Moment, RPM and Sapperseating structural and operational parts, controls, casters, pneumatic cylinders, seat and back suspension material (except seating upholstery, textiles andleathers, finishes and labor, see below). Labor to repair Generation by Knoll work chair.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), cascade edge worksurfaces, special orcustom product, wood veneer products, Currents handcrank, Interaction Counterforce, Interaction crank-adjustable, and split-top mechanisms,KnollStudio, KnollExtra Wishbone and Zorro monitor supports, CPU storage and all universal storage drawers, Spark Series seating structural parts,(except seating upholstery, textiles, finishes and labor, see below).3 Years: Bulldog, Chadwick, Essentials Work Chairs, Life, Moment, RPM, Sapper seating upholstery, textiles and leathers, finishes and labor to repair,Generation by Knoll work chair seating uphostery, textiles and leathers, and finishes, Spark Series seating uphostery and textiles. Fabric boards textilesand Smokador Collection leathers.2 Years: All other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, Spark Series seating finishes and labor to repair, woodcasegoods upholstered surfaces.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles (consult current KnollTextiles price list for applicable warranty).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matchingof the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROMCOURSE OF DEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller,with respect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of anygovernmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond itsreasonable control. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocateavailable Product or cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against thePurchaser, and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunderconstitutes a direct or a contributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only ifPurchaser shall have made all payments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistancefor the defense of said claim, suit or proceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM ABREACH OF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered intobetween the parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

247January 1, 2010

KnollKey Lock Program

KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.

Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.

Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.

There is no charge for key-alike orders if placed with the furniture order.

IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.

If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.

Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.

KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.

Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.

Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.

Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.

How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.

Step 1 - Using the project floorplan, count the number of locks in eachworkstation.

Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.

5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station

Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.

Qty Pattern # Description Unit List Ext. List

5

Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix forthe number of locks for that group (i.e., for 2 locks per station, add thesuffix ‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).


5 KSPEC 2 Set of 2 cores/keys N / C N / C

Step 5 - Repeat for other groups.





Your Key instructions are complete.

Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom ProductDevelopment. For additions to existing installations, specify desiredkey numbers in the description.

Service PartsPattern # Description List Price

KKEY_ _ _ Shrouded KeySpecify key number desired

$5

KBLANK Shrouded Key Blank $5

KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired

$18

KCHANGE Change Key $5

KMASTER* Master Key $5

*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.

248

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

249

Table of Contents Knoll Office Tables · Cascade Edge Top Tables Four-star base, fixed and...

Documents

Transcript of Table of Contents Knoll Office Tables · Cascade Edge Top Tables Four-star base, fixed and...