Table of Contents Foreword by the Dean, Faculty of Mechanical ...

1

Table of Contents

Foreword by the Dean, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia

Foreword by the Conference Chair

Keynote Speakers IMAT 2014 PROGRAMME SCHEDULE

Organising Committee

Acknowledgement

2

Foreword by the Dean of Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia

On behalf of Universiti Teknologi Malaysia, I would like to welcome all participants to the 7th IMAT. Thank you to you who have come to share your scientific research experience and outcomes, committed yourselves towards the betterment of the world that we live in. I hope that this meeting of like minds in the areas of thermofluids will create greater consciousness of the necessity for researchers to work together and synergize our research efforts with results that will benefit mankind in one way or another, directly or indirectly, sooner or later. Universiti Teknologi Malaysia, as one of the significant research universities in Malaysia that focuses in the field of science and technology, has contributed much through its students and academicians who have actively and relentlessly pursue their research interest. So have you. It is hoped that this 2-day event with the sessions emphasizing on improvements and optimization with theoretical, experimental, and numerical techniques in thermofluids, will steer the directions of future research towards organized and systematic research activities. PROF. DR. NOORDIN BIN MOHD YUSOF Dean Faculty of Mechanical Engineering Universiti Teknologi Malaysia

3

Foreword by the Conference Chair

I thank God AlMighty for this 7th IMAT that has been made possible through much effort from our own academic staffs at Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM). I am thankful for their cooperation and assistance, working with me as a team in making this 7th IMAT a success. I am also grateful towards our partner universities; National University of Singapore and Universiti Indonesia without which there would have been no IMAT to begin with. I would like to thank all participants for taking part in this event, for their contributions of knowledge in engineering the future of thermofluid sciences.

Seven years have passed since the first humble beginning of the 1st IMAT held in UTM in 2008 with the intention of assisting our research students and academicians share their latest findings in thermofluids. Since then many research opportunities in terms of ideas and collaborations have emerged. I would like to call upon all participants to continue with our research endeavor to move forward as we exchange ideas and knowledge towards realizing a better environment through effective, efficient, and sustainable thermofluid processes and systems.

ASSOC. PROF. DR. MAZLAN BIN ABDUL WAHID Chairman of the 7th IMAT Faculty of Mechanical Engineering Universiti Teknologi Malaysia

4

Keynote Speakers Progress and Challenges in the Development of Detonation Engines for Propulsion and Power Production Professor Frank K. Lu University of Texas, Arlington United State of America

Nanofluid in Thermal Transfer. Is it A Solution for The Future? Professor Thierry Maré Université Rennes, France France

Prospects for Use of Solar Thermal Energy in High-Temperature Process Heat Applications Associate Professor Hany Al-Ansary King Saud University (KSU) Saudi Arabia

5

IMAT 2014 PROGRAMME SCHEDULE

1700-1900 25 November 2014 (Tuesday): Pre-Registration Grand Lotus Lobby, Level 2

DAY 1 : 26 NOVEMBER 2014 , WEDNESDAY

0730-0900 Registration

0900-0930 Opening Ceremony

0930-1010

Keynote 1 Progress and Challenges in the Development of Detonation Engines for Propulsion and Power Production

Professor Frank K. Lu University of Texas, Arlington

1010-1045

Keynote 2 Nanofluid in Thermal Transfer. Is it A Solution for The Future?

Professor Thierry Maré Université Rennes, France

1045-1100 Photo Session

1100-1130 Tea Break

6

SESSION 1

Room 1 (Lotus 2, Level 1) Room 2 (Lotus 3, Level 2) Room 3 (Dahlia, Level 2) Room 4 (Orkid, Level 2)

Session 1A Session 1B Session 1C Session 1D

1130-1145

ID : 10125 A Review in Alternative

Fuels in Flameless Combustion

Ehsan Hamidi, Mazlan Bin Abdul Wahid


ID: 1016 A CFD Simulation of

Indoor Air Contaminant on Ventilation System in a

Bus Passenger Compartment

Noor Emilia Ahmad Shafie, Haslinda

Mohamed Kamar, Nazri Kamsah


ID : 1053 A New Approach for

Ignition Timing Correction in Spark Ignition Engines

Based on Cylinder Tendency to Surface

Ignition Ali Ghanaati, Mohd Farid Muhamad Said, Intan Z.

Mat Darus, Amin Mahmoudzadeh Andwari


ID : 10161 A Comparative Study on

The Structures of Hydrothermally

Synthesized Fe, Cu and Ni Based MOFs

Farrukh Israr, Yeongmin Kim, Seung Jin O2, Kim

Choon Ng, Wongee Chun Jeju National University,

Korea

1145-1200

ID: 1061 Alternative Lubricants: Study on Plant-Based Lubricants in Metal

Forming Process M.A. Nurul,S. Syahrullail


ID : 1099 Decontamination and Treatment Process for

Efficiency of HVAC Building

Amirah Haziqah, Henry Nasution, Azhar Abdul Aziz, Zulkarnain Abdul

Latiff, Mohd Rozi Mohd Perang, William R. Y,

Esther Elyena Universiti Teknologi

Malaysia

ID : 1045 A Review on Butanol and Ethanol Fuels in Internal

Combustion Engines Abdullah Mustafa

Hamida, Zulkarnain Abdul Latiff, Azhar Abdul Aziz,

Mohd Rozi Mohd Perang Universiti Teknologi

Malaysia

ID : 1064 Analysis of Center Pivot

Irrigation System by Experimental Method Mohamad Nor Musa,

Muhammad Ariff Taha Universiti Teknologi

Malaysia

1200-1215

ID : 1015 Characteristic of Oil Palm

Activated Carbon Produced from Microwave and

Conventional Heating Fatimatul Zaharah Abas,

Farid Nasir Ani Universiti Teknologi

Malaysia

ID : 10135 Energy Savings Potential

by Variable Speed Control of Compressor for Air-Conditioning Systems using PID Controller

Henry Nasution, Azhar Abdul Aziz, Muchamad Oktaviandri, Sulaimon

Shodiya, Sumeru Universiti Teknologi

Malaysia

ID : 10190 An Overview on Flameless

Combustion Chamber Designs and Performances

for Liquid and Solid Fuel A. Kasani, M. Fahmi , M.A.

Wahid Universiti Tun Hussein

Onn Malaysia

ID : 1054 1054Characterization of

Flat Sheet PD/AG Membrane using Pure

Hydrogen Hasan Mohd Faizal, Yuki

Kawasaki, Takeshi Yokomori, Toshihisa Ueda

Keio University, Japan

7

1215-1230

ID : 1032 Effect of Air to Air Fixed Plate Enthalpy Energy

Recovery Heat Exchanger Flow Profile on Air

Conditioning System Energy Recovery

Mohammad Shakir Nasif, Rafat Al-Waked

Universiti Teknologi PETRONAS, Malaysia

ID : 10101 Performance Analysis for Vehicle Air Conditioning

System with Direct Current Compressor in

Non-Electric Vehicle using Fuzzy Logic Controller

Afiq Aiman Dahlan, Amirah Haziqah Zulkifli, Henry Nasution, Azhar Abdul Aziz, Mohd Rozi

Mohd Perang Universiti Teknologi

Malaysia

ID : 10187 Development of Pulse

Combustion Hot Water Boiler

Izzwareed A., A. Dairobi G.,M. A. Wahid and M. M.

Sies Universiti Teknologi

Malaysia

ID : 1058 Design, Simulation and

Fabrication of Polydimethylsiloxane

(PDMS) Microchannel for Lab-on-Chip (LoC)

Applications Abidin Ummikalsom,

Majlis Burhanuddin Yeop, Yunas Jumril

Universiti Kebangsaan Malaysia

8

SESSION 2



1230-1245

ID : 10124 Electrical Generation

using Renewable Technology for Remote

Area: A Review Fatemeh Behrouzi , Adi Maimun Abdul Malik,

Yasser Mohammed Ahmed, Mehdi Nakisa


ID : 1017 Modeling and Parametric

Study of Cooling Loads Characteristics for Automotive Air-

Conditioning System JS Pau1, WKS Pao, SP Yong, , PQ Memon Universiti Teknologi PETRONAS, Malaysia

ID : 10185 Experiments on

Combustion Kernel Growth in Gaseous

Explosions Mazlan Abdul Wahid, Mohd Suardi Suhaimi,

Muaz Nadzri, Mohsin M. Sies


ID : 1069 Effects of Different Load with Vary Lubricant on The Friction Coefficient

and Wear Rate Using Pin on Disk Tribometer

S.Syahrullail ,N.Nuraliza Universiti Teknologi

Malaysia

1245-1300

ID :10186 Exergy Analysis and

Exergoeconomic Optimization with

Multiobjective Method of Unit 4 Kamojang

Geothermal Power Plant Nasruddin, Septian Khairul

Masdi, Arief Surachman Universitas Indonesia

ID : 1036 Field Measurement of Airborne Particulate

Matters Concentration in A Hospital’s Operating

Room Haslinda Mohamed

Kamar, Nazri Kamsah, Wong Keng Yinn


ID : 1043 Flameless Combustion of Biogas from Palm Oil Mill

Effluent Seyed Ehsan Hosseini,

Ghobad Bagheri, Mazlan Abdul Wahid


ID : 10108 Evaluation of Palm Olein

as Shaft Lubricant N. Sapawe , S. Syahrullail,

F. Muhammad Universiti Teknologi

Malaysia

1300-1315

ID : 10128 Exhaust Energy Recovery with Turbo Compounding

in A Heavily Downsized Engine

Alias Mohd Noor, Rosnizam Che Puteh,

Muhammad Rabiu Abbas, Srithar Rajoo, Muhammad

Hanafi Md Sah Universiti Teknologi

Malaysia

ID : 10143 Investigation of The PMV

and TSV Models of Thermal Comfort in Air-Conditioned University Classrooms in Malaysia

Nur Atikah Shaari, Sheikh Ahmad Zaki Shaikh Salim, Mohamed Sukri Mat Ali,

Azli Abd Razak Universiti Teknologi

Malaysia

ID : 10137 101761N Combustion of Propane-Air Mixture in A Laboratory Scale Burner A. A. A. Abuelnuor, M. A. Wahid, A. Saat, Khalid M. Saqr .Mohsin Mohd. Sies


ID : 1037 Evaluation of Relative Permeability Models in CO2/Brine System using Mixed and Hybrid Finite

Element Method JS Pau, WKS Pao, SP Yong ,

PQ Memon Universiti Teknologi PETRONAS, Malaysia

9

1315-1330

ID : 1039 Humidity and Water

Effect on Wear Characteristics of Disc

Braking System Muhammad Faiz Fadzli

Abdul Mokti, Mohd Kameil Abdul Hamid,

Abdul Rahim Abu Bakar Universiti Teknologi

Malaysia

ID : 10151 Validation of a CFD Non-

Newtonian Eulerian-Eulerian Model for

Predicting Wellbore Filter Cake Formation

Ali I. Shehata, Mohamed Shokry, Khalid M. Saqr,

Mohamed Shehadeh Arab Academy for

Science, Technology and Maritime Transport, Abu

Qir, Alexandria, EGYPT

ID : 1023 Fluidization of Gas-Solid in

Atmospheric Bubbling Fluidized Bed Combustor

Rosyida Permatasari, Tholudin Mat Lazim, Tono

Sukarnoto, Supriyadi, University Kyai Tapa,

Jakarta, Indonesia

ID : 1085 Experimental

Investigation on Contact Angle of Sintered Copper

Powder Wick Nandy Putra, Iwan

Setyawan, Dimas Raditya University of Indonesia

1330-1430 Lunch

10

SESSION 3



1430-1445

ID : 10103 An Analytical Convergence

Study of The Forced Air Cooling in Electronic

Packaging K.A.Ong, M.Z Abdullah

Universiti Sains Malaysia

ID : 1050 Investigation of Heat

Transfer Enhancement in The Corrugated Fin and

Tube Compact Heat Exchangers

Ahmadali Gholami, Mazlan Abdul Wahid,

Hussein A. Mohammed Universiti Teknologi

Malaysia

ID : I082 Investigation on Potential

Working Fluids for Waste Heat Recovery

Applications Struzyna Ralf, Menne

Andreas, Steinmill Jens Chair of Internal

Combustion Engines, Ruhr-University Bochum,

Germany

ID : 1087 Flow Visualization of Fractal Baffles and

Impellers for Stirred Tank with a Single Stage 4-

Blade Rushton Turbine Manshoor Bukhari,

Mokhranim Muhammad Haziq, Zaman Izzuddin,

Khalid Amir Universiti Tun Hussein

Onn Malaysia

1445-1500

ID : 10144 Development of A

Portable Low Cost Water Purifier Utilising Solar

Desalination Technique Z. A. Kamarulbaharin, M.

A. Aziz Universiti Teknologi

MARA, Malaysia

ID: 10112 Investigation of Inverse-

Turbulent-Prandtl Number with Four RNG k-ε Turbulence Models on Compressor Discharge

Pipe of Bioenergy Micro Gas Turbine Ahmad Indra

Siswantara,Budiarso, Steven Darmawan

Universitas Indonesia

ID : 10104 Analysis of Porous

Layered Journal Bearing Lubricated with Ferrofluid T. V. V. L. N. Rao, A. M. A. Rani, T. Nagarajan, F. M.

Hashim Universiti Teknologi PETRONAS, Malaysia

ID : 10117 Hydrate Formation in Two

Phase Flow in Pipe William Pao, Fakhruldin

M. Hashim, Aklilu T. Baheta,Sook-Harn Seng


11

1500-1515

ID : 1013 Dynamic Modeling of

Solar Air Collector with Thermal Storage Material


ID : 10132 Measurement of

Thermoelectric Potential Coupling Coefficient for Sandstone Rock Sample Mohd Zaidi bin Jaafar1,

Abdul Razak Ismail , Mohamad Kamil bin

Saharuddin, Siti Mardhiah binti Mohd Anuar, Siti

Rahmah bte Suradi, Shaziera binti Omar Universiti Teknologi

Malaysia

ID : 10155 Binder Influence on The

Water Adsorption Uptake of Silica Gel

Ang Li, Kyaw Thu, Karan M Sabnani, Kim Choon Ng National University of

Singapore

ID : 1093 Hydrodynamic Resistance

Reduction of Multi-Purpose Amphibious

Vehicle Due to Air Bubble Effect

Adi Maimun, Mehdi Nakisa, Yasser M. Ahmed, Fatemeh Behrouzi, Koh K.

King, Agoes Priyanto Universiti Teknologi

Malaysia

1515-1530

ID : 10188 Characteristics of Two-

phase Flow Heat Transfer of R-22 and R-290 in

Horizontal Circular Small Tube

A.S. Pamitran, U. Khabibah, N. Mohd-

Ghazali, R. Ahmad, K. Saito

University of Indonesia

ID : 10148 Numerical Investigation of

Heat Transfer Enhancement in Adsorbed

Natural Gas Storage Under the Dynamic

Conditions Ybyraiymkul D.T, Kaltayev

A, Kim Choon Ng Kazakh National

University

ID : 1088 CFD Simulation of Vortex Induced Vibration of Two

Circular Cylinder in Tandem Arrangements

Seyed Alireza Ghazanfari, Mazlan Abdul Wahid, Adi Maimun bin Abdul Malik,

Hussein A.Mohammed Universiti Teknologi

Malaysia

ID : 1086 Impact of Adjacent Building on Outdoor Ventilation Around A

Layout of Two Buildings Ayo Samuel Adinoyi,

Normah Mohd-Ghazali, Shuhaimi Mansor


1530-1545

ID : 1075 Characterization of A Short Microchannel

Device for Surface Cooling Kamaruzaman N. B, Saat

A. Universiti Teknologi

Malaysia

ID : 1034 Numerical Investigation of Rectangular Twisted Hole

on Film Cooling for Gas Turbine Blades

Aminuddin Saat, Ammar Fakhir, Tholudin Mat

Lazim and Zaid Sattar Kareem


ID : 10184 Characteristics of Two-

Phase Flow Pressure Drop of Propane in Horizontal

Circular Small Tube A.S. Pamitran, S.

Novianto, T.A. Simanjuntak,

Nasruddin,M.I. Alhamid University of Indonesia

ID : 1079 Investigation of Physical

and Mechanical Properties of 3-D

Turbulent Flow in Orifice Pipe

Mohamed Abed Alabas Siba, Wan Mohd Faizal Wan Mahmood, Mohd

Zaki Nuawi, Rasidi Rasani, Mohamed Nassir


12

1545-1600

ID : 10189 Cost Estimation Study for the Effect of Biofouling on

Engine Cooling System Performance with an 8000

BHP Vessel S.A. Adam, A.S. Pamitran, Nasruddin, M.I. Alhamid

Universitas Indonesia

ID : 1072 Numerical Study of Mixed

Convection Through Horizontal Duct Utilizing

Al2O3 Nur Irmawati Om, H. A.

Mohammed Universiti Tenaga

Nasional, Malaysia

ID : 10169 Comparison of Different Neural Network Training

Algorithms for Wind Velocity Forecasting

Morteza Khalaji Assadi, Shervin Safaei


ID : 1071 Multi-Layer Micro Channels System: Interpretation and

Developments Husain Zaidan, Normah Mohd Ghazali, Robiah

Ahmad Universiti Teknologi

Malaysia

1600-1615

ID : 1091 Effect of Nozzle Vanes to

The Flow Field Development in An

Automotive Mixed Flow Turbocharger Turbine

M.H. Padzillah, R.F. Martinez-Botas


ID: 1068

Performance of the Solar Collector With Vacuum

Tube and Dual Heat Pipes Based on Wick Length Variation Nandy Putra, Kristofer Haliansyah, Wayan Nata Septiadi

Universiti Teknikal Malaysia Melaka

ID : 1074 Comparison of Short

Microchannel Performance using

Simulation Study and Theoretical Calculation

Kamaruzaman N. B, Saat A, Abang Zaidel D. N, Ida

Idayu Muhamad Universiti Teknologi

Malaysia

ID : 1052 NOX Characteristics in

Asymmetric Vortex Combustion

Raid.A, Alwan, M.A. Wahid, A.A.A.

Abuelnuorand Arkan.Al Taie


1615-1630

ID : 1018 Development of Water

Hydraulic System Mohd Noor Asril Saadun,

Ahmad Anas Yusof , Mohd Syukran Ismail , Mohd Khairi Mohamed

Nor, Muhammad Zaidan Abdul Manaf, Mohd

Qadafie Ibrahim University of Indonesia

ID : 10120 Numerical Investigation of

Turbulent Magnetic Nanofluid Flow Inside

Straight Channels Nor Azwadi Che Sidik,

Mohammed Raad Abdulwahab


1630-1645 Tea Break

13

SESSION 4



1645-1700

ID : 1065 Effectiveness of Jet

Impingement Cooling System on Convex Surface

Mohamad Nor Musa, Mohamad Faizal Fauzi


ID : 10166 Numerical Analysis of

Experimental Turbulent Forced Convection Heat Transfer for

Nanofluid Flow in a Tube Viswanatha Sharma Korada, W.H.Azmi,

Subhash Kamal Universiti Teknologi Petronas, Malaysia

ID : 10183 Effects of Non-Newtonian

Viscosity on The Hemodynamics of

Cerebral Aneurysms Ahmad elGibaly, Omar A. El-Bassiouny, Omar Diaa

Aly I. Shehata, Tamer Hassan, Khalid M. Saqr College of Engineering and Technology, Arab Academy for Science,

Technology and Maritime Transport Alexandria,

EGYPT

ID : 1024 Numerical Simulation of

the Transient Development of Slug Flow

in Horizontal Pipes Zahid I. Al-Hashimya, Hussain H. Al-Kayiem, Mohammad S. Nasif,

Abdalellah O. Mohmmed Universiti Teknologi PETRONAS, Malaysia

1700-1715

ID : 10163 Effects of The Optimized Resonator Dimensions on The Performance of The

Standing-Wave Thermoacoustic

Refrigerator Mawahib Hassan El-Fawal,

Normah Mohd-Ghazali, Mohd-Shafiek Yaccob University of Kordofan,

Elobied, Sudan

ID : 10153 Prediction of Annual Performance of CPV Systems using Multi-Junction Solar Cells

Muhammad Burhan, Seung Jin Oh, Muhammad

Wakil Shahzad, Young Deuk Kim, Ng Kim Choon,

Wongee Chun National University of

Singapore

ID : 10110 Effects of Two-Phase Flow

Friction Factor Correlations on The

Optimal Pressure Drop-Martinelli Parameter Pair

in A Mini-Channel Normah Mohd Ghazali,

Agus Sunjarianto Pamitran, Oh Jong-Taek,

Robiah Ahmad, Muhammad Khairul Fitkry

Rabin Universiti Teknologi

Malaysia

ID : 10105 Numerical Study on Fluid Structure Interaction of

Slug Flow in A Horizontal Pipeline

Abdalellah Omer Mohmmed, Mohammad

Shakir Nasif, Hussain Hamoud Al-Kayiem, Zahid

Ibrahim Al-Hashimy Universiti Teknologi PETRONAS, Malaysia

1715-1730

ID : 10171 Effects of The Position of Kitchen Hood Suction on

Thermal Comfort and Carbon Dioxide Gas

Emission from An Urban Residential Kitchen in Developing Countries M. Hamidur Rahman, A.K.M. Sadrul Islam Islamic University of

Technology, Board Bazar, Gazipur, Bangladesh

ID : 1073 Simulation of Heat Flux Effect in Straight Heat

Pipe as Passive Residual Heat Removal System in

Light Water Reactor using RELAP5 Mod 3.2

M. Hadi Kusuma, Nandy Putra, Surip Widodo,

Anhar Riza Antariksawan University of Indonesia

ID : 1059 Fabrication of UV-curing

Polyurethane Methacrylate (PUMA)

Microchannel and Fluidics Interconnect for

Microfluidics Applications Abidin Ummikalsom,

Burhanuddin Yeop Majlis, Yunas Jumril


ID : 10111 Optimal Frictional

Pressure Drop and Vapor Quality Relationship of

Ammonia and R22 in Two-Phase Flow

Normah Mohd-Ghazali,Oh Jong-Taek, Robiah Ahmad,

Nor Atikah Zolpakar Universiti Teknologi

Malaysia

14

1730-1745

ID : 1084 Fabrication of Lotus-Type Porous Copper using Slip

Casting and Sintering Techniques for Heat Pipe

Applications Sugeng Supriadi, Nandy

Putra, Bambang Ariantara, Sunaryo, Dadit D.

Rahmanto University of Indonesia

ID : 10170 Simulation of Dynamical

Performance of Solar Desiccant Cooling Cycle Morteza Khalaji Assadi ,

Ali Mohammadi Universiti Teknologi PETRONAS, Malaysia

ID : 10156 Experimental Study of A

Laminar Flow Solid Desiccant Dehumidifier

Driven by A Low Temperature Heat Source Seung Jin Oh, Kyaw Thu,

Muhammad Wakil Shahzad, Wongee Chun, Kim Choon Ng National University of Singapore

ID : 10145 Simulation of Unsteady

Incompressible Flow using A New Particle Method Khai-Ching Ng, Syamimi Mohd Yusoff , Yao-Hsin

Hwang Tony Wen-Hann Sheu,

Mohd-Zamri Yusoff Universiti Tenaga Nasional,Malaysia

1745-1800

ID : 10140 Influence of Some

Parameters on Thermo-Hydrodynamic Fluid Flow

Behaviour of Solar Chimney Power Plants Toufik Chergui, Salah Larbi, Amor Bouhdjar Polytechnic National

School of Algiers, ALGERIA

ID : 1041 Study of Turbulent

Convective Heat Transfer Enhancement by Al2O3-Water Nanofluid through

a Rough Circular Tube M. Monjurul Ehsan, Shafi Noor, Sayedus Salehin, A.

K. M. Sadrul Islam Islamic University of

Technology, Board Bazar, Gazipur, Bangladesh

1930-2200 CONFERENCE DINNER SWISS-GARDEN HOTEL & RESIDENCES KUALA LUMPUR

15

DAY 2 : 27 NOVEMBER 2014 , THURSDAY

0900-1000

Keynote 3 Prospects for Use of Solar Thermal Energy in High-Temperature Process Heat Applications

Associate Professor Hany Al-Ansary King Saud University (KSU)

1000-1030 Tea Break

SESSION 5

Room 1 (Lotus 2, Level 1) Room 2 (Lotus 3, Level 2) Room 3 (Dahlia, Level 2)

Session 5A Session 5B Session 5C

1030-1045

ID : 1056 Initial Study on Hydrogen

Permeation with Flat Sheet Pd/Ag Membrane for Mixture of Hydrogen

and Carbon Dioxide Hasan Mohd Faizal, Yuki

Kawasaki, Takeshi Yokomori, Toshihisa Ueda

Graduate School of Science and Technology,

Keio University, Japan

ID : 1033 Single-Objective

Optimization of A Thermoacoustic

Refrigerator Nor Atiqah Zolpakar,

Normah Mohd Ghazali, Robiah Ahmad


ID : 1019 Thermal Conductivity of Carbon Nanotube Based

Nanofluids as Heat Transfer Fluids

K.Y. Leong, Ibnorita Che Ibrahim, Noor Hafizah

Amer, M.S. Risby Universiti Pertahanan

Nasional Malaysia

1045-1100

ID : 10130 Investigation of

Performance and Fuel Economy for Cylinder Deactivation Engine at

Part Load Operation S.F. Zainal Abidin, M.F.

Muhamad Said, A.A. Aziz, M.A. Abas, N.I. Arishad


ID : 1028 Study of A Heat Pump for Simultaneous Cooling and

Desalination Byrne Paul, Ait Oumeziane

Yacine, Serres Laurent, Mare Thierry

Université Européenne de Bretagne

ID : 1077 Transient Analysis of

Microchannel Heat Sink during Single Phase and Flow Boiling Conditions

Yogesh K. Prajapati, Manabendra Pathak, Mohd. Kaleem Khan

Indian Institute of Technology Patna, India

16

1100-1115

ID : 10109 Low Energy Nuclear Reaction (LENR) –

Sustainable and Green Energy: A Review

Md Zishan Akhter, M.A. Hassan

Sharda University, India

ID : 1080 Theoretical Study of A Novel Four-Chamber Rotary Compressor:

Design and Thermodynamic Analysis

Yahya Ahmed Alduqri, Md Nor Musa


ID : 10114 Validation of Thermal Modelling for the Back

Surface Temperature of a Photovoltaic Module for Hot and Humid Climate Mohd Afzanizam Mohd

Rosli, Sohif Mat, Kamaruzzaman Sopian,

Mohd Khairul Anuar Sharif, M. Yusof Sulaiman,

Elias@Ilias Salleh Universiti Teknikal Malaysia Melaka

1115-1130

ID : 1042 Modeling of An Optimized Hybrid Energy System for

Kutubdia Island, Bangladesh

Sayedus Salehin, M. Monjurul Ehsan, Shafi

Noor, A.K.M. Sadrul Islam Islamic University of

Technology, Bangladesh

ID : 1063 Thermal Conductivity for

Mixture of Rice Husk Fiber and Gypsum

Mohd Nor Musa, Mohamed Fikhri Abdul

Aziz Universiti Teknologi

Malaysia

ID : 1021 Solar Pumping System for Rural Areas Water Supply

in Nigeria Muhammadu Masin

Muhammadu Federal University of Technology, Nigeria

1130-1145

ID : 10126 Numerical Simulation of

Tangential Flow Flameless Combustion

Ehsan Hamidi, Mazlan bin Abdul Wahid


ID : 1067 Experimental Study on Influence of Surfactant

Dosage on Micro Explosion Occurrence in Water in Diesel Emulsion

Mohammed Yahaya Khan, Z.A. Abdul Karim, A.R.A.

Aziz, Isa M Tan Universiti Teknologi Petronas, Malaysia

ID : 10133 Study of Oxidation

Behavior of Thermal Spray Coating on Superalloys at

900 °C Subhash Kamal, KV

Sharma Universiti Teknologi Petronas, Malaysia

1145-1200

ID : 1076 Preliminary CFD

Investigation of Syngas Combustion at Different

Operating Pressure Norhaslina Mat Zian,

Hasril Hasini, Nur Irmawati Om

Universiti Tenaga Nasional, Malaysia

ID : 1029 Hydrodynamic Design of

New Type of Artificial Reefs

O.B. Yaakob, Yasser M. Ahmed, M. Rajali Jalal, Faizul A.A., K.K. Koh,

Tarmizi J. Zaid Universiti Teknologi

Malaysia

ID : 1022 The Deformation of

Human Eyeball When Undergoing Scleral

Buckling Zuhaila Ismail, Alistair Fitt,

Colin Please Universiti Teknologi

Malaysia

17

1200-1215

ID : 10119 Simulation validation of

Hot Burned Gas Influences on the Exhaust Emission Characteristics of A Two-

Stroke Cycle Engine Amin Mahmoudzadeh Andwari, Azhar Abdul

Aziz, Mohd Farid Muhamad Said,

Zulkarnain Abdul Latiff, Ali Ghanaati


ID : 10200 Performance

Enhancement of Tilt-Body Micro Air Vehicle by Use

of Orthotropic Laminated Proprotors

Mohd Zawawi Fazila, Lv Peng, Prothin Sebastien, Morlier Joseph, Benard Emmanuel, Moschetta

Jean-Marc

ID : 1062 The Effect of Pits on The

Curvature Cup: for Reducing Friction in Soft on Hard Sliding Contact Syahrullail Samion, Md Razak Daud, Norzahir

Sapawe, Azli Yahya Universiti Teknologi

Malaysia

1215-1230

ID : 1044 The Effects of Inlet

Configuration on The Thermal Efficiency and Flame Stability of Lean

Hydrogen–Air Premixed Micro-Combustion

Seyed Ehsan Hosseini, Ghobad Bagheri, Mazlan

Abdul Wahid Universiti Teknologi

Malaysia

ID : 10131 Optimization of Valve Lift

Profile for Engine with Cylinder Deactivation

Izwan Hamid, Mohd Farid Muhamad Said


ID : 1040 The Road Particle Effect on Squeal Noise of Disc

Braking System Muhammad Arsyad Abdul

Rahman, Mohd Kameil Abdul Hamid, Ahmad

Razimi Mat Lazim Universiti Teknologi

Malaysia

1230-1245

ID : 1060 The Influence of Modified

Air on Combustion Characteristics in Meso-Scale Vortex Combustor Mostafa Khaleghi, M.A.

Wahid, H.A. Mohammed Universiti Teknologi

Malaysia

ID : 1081 Prediction and Analysis of Building Energy Efficiency

using Artificial Neural Network and Design of

Experiments Sholahudin, Azimil Gani

Alam, Chang-In Baek, Hwataik Han

Kookmin University, Korea

ID : 1066 The Use of Tertiary-Butyl-Hydroquinone (TBHQ) in

Minimizing Oxidation Effects on Palm Oil Based Lubricant Using Four Ball

Tribotester S. Syahrullail, P. Zulhanafi


1245-1300

ID : 1090 Validation of A Benchmark

Methanol Flame using Open FOAM

Mohd Yasin Mohd Fairus, Cant Stewart


ID : 10158 Prediction of Gas Hydrate

Formation using Radial Basis Function Network

and Support Vector Machines

Abdulwehab A. Ibrahim, Tamiru Alemu Lemma, Moey Lip Kean, Mesfin

Gizaw Zewge INTI International

University, Malaysia

1300-1400 Lunch

18

ORGANISING COMMITTEE

Patron: Prof. Datuk Ir. Dr. Wahid Bin Omar

Advisor: Professor Ir. Dr. Roslan Abdul Rahman Professor Dr. Noordin Mohd Yusof

Conference Chairman: Assoc. Prof. Dr. Mazlan Abdul Wahid

Secretary: Assoc. Prof. Dr. Syahrullail Samion

Technical Committee: Assoc. Prof. Dr. Nazri Kamsah Assoc. Prof. Dr. Kahar Osman Assoc. Prof. Dr. Nor Azwadi Che Sidik Assoc. Prof. Dr. Normah Mohd Ghazali Dr. Haslinda Mohamed Kamar Dr. Zulkanain Abdul Latiff Dr. Aminuddin Saat Dr. Mohd Farid Mohd Said Dr. Henry Nasution Dr. Mohd Yusoff Senawi Dr. Mohd Fairuz Mohd Yasin Mr. Mohsin Sies Mrs. Natrah Kamaruzaman

19

ACKNOWLEDGEMENT

The Organising Committee of the 7th International Meeting on Advances in Thermofluids would like to express our sincere gratitude to the following for their help, support and generous contribution :

Prof. Datuk Ir. Dr. Wahid Bin Omar Vice-Chancellor UTM

Faculty of Mechanical Engineering, Universiti Teknologi Malaysia

National University of Singapore

University of Indonesia

Taat Bestari Sdn. Bhd

Malakoff Corporation Berhad

IPM Engineering Sdn. Bhd.

UTM Innovation & Commercialisation Centre

Presenters and Participants

and to everyone who has made this conference a successful event

THANK YOU

20

SPONSORS

Area Of Expertise

Laboratory Design For Fume Hood, Lab Bench and Cabinets Custom Made For Furnace, Hydraulic Press and Glassware

Injection Moulding Tribology

Metallography Material Testing Powder Metalllurgy Bioindustry

Fluid Mechanics

For more info, please contact: Shah Rizal Saupi email: [email protected]

22

___________________________________ We specialise in:

Civil & Structural Design Geotechnical Design Green Building Index Project Management

_________________________________

Table of Contents Foreword by the Dean, Faculty of Mechanical ...

Documents

Transcript of Table of Contents Foreword by the Dean, Faculty of Mechanical ...