TABLE OF CONTENTS by AUTHOR · carpenter, d. 13-102understanding uranium roll-front formation aids...

TABLE OF CONTENTS by AUTHOR

Instructions on how to find papers of interest (using this Table of Contents). Search for a text string or paper title, or scroll down the listing if just

browsinClick on the blue paper title to go directly to the paper of interest.

Abbasi, B. 13-149 STRESS DISTRIBUTION AROUND TYPICAL FIELD INTERSECTION GEOMETRIES IN COAL MINES

Abbasi, B. 13-148 NUMERICAL ANALYSES OF STABILITY OF THREE-WAY AND FOUR-WAY COAL MINE INTERSECTIONS IN ILLINOIS

Adams, W. 13-099 AQUATIC LIFE CRITERIA ARE PROTECTIVE AGAINST COPPER-CAUSED IMPAIRMENT OF OLFACTION IN SALMONID FISHES

Adsero, R. 13-113 WHAT WILL HALT THE WORLDWIDE DECLINE IN MINE EQUIPMENT PERFORMANCE?

Adu-Acheampong, A. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Akbari, H. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Anani, A. 13-070 INCORPORATING CYCLE TIME DEPENDENCY IN TRUCK-SHOVEL MODELING

Anderson, C. D. 13-060 EXTRACTIVE METALLURGY OF RHENIUM: A REVIEW

Anderson, C. G. 13-060 EXTRACTIVE METALLURGY OF RHENIUM: A REVIEW

Andrews, T. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Andrusiewicz, M. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Aouad, N. 13-129 ENGINEERING THE HEALTH, SAFETY AND COMFORT OF DUMP TRUCK OPERATORS

Arana, L. 13-139 NEW GENERATION OF GEARLESS MILL DRIVE WHEN HIGH EFFICIENCY MEETS HIGH AVAILABILITY

Arnold, S. 13-107 ION EXCHANGE AS A PRIMARY PRODUCTION TECHNIQUE IN HYDROMETALLURGY

TOC-Number of 27 Pages Copyright © 2013 by SME

Asadi, E. 13-085 THE ASSESSMENT OF THE EFFECT OF SILICON CARBIDE PARTICLE SIZE AND THE TYPE OF GATING SYSTEM ON COMPOSITE MICROSTRUCTURE PRODUCED BY LOST FOAM CASTING METHOD

Ashrafi, J. 13-036 EVALUATION OF TEMPERATURE EFFECT ON P-WAVE VELOCITY, UCS AND ELASTICITY MODULUD OF ROCKS, USING NEWLY DEVELOPED APPARATUS

Askari-Naseab, H. 13-134 AUTOMATIC CREATION OF ORE-SELECTION AND BLAST POLYGONS USING CLUSTERING ALGORITHMS

Askari-Nasab, H. 13-080 AN INTEGRATION OF LONG-TERM MINE PLANNING, TAILINGS AND RECLAMATION PLANS

Askilsrud, O. 13-105 A DISCUSSION ON TBM CUTTER CHANGE TIME AND CUTTER LIFE

Athanassopoulos, C. 13-055 AN EVALUATION OF ENGINEERED COVER SYSTEMS FOR MINE WASTE ROCK AND TAILINGS

Awuah-Offei, K. 13-045 FRAMEWORK FOR STOCHASTIC MODELING OF DRAGLINE ENERGY EFFICIENCY

Awuah-Offei, K. 13-070 INCORPORATING CYCLE TIME DEPENDENCY IN TRUCK-SHOVEL MODELING

Badiozamani, M. 13-080 AN INTEGRATION OF LONG-TERM MINE PLANNING, TAILINGS AND RECLAMATION PLANS

Bagherieh, A. 13-100 A CLOSER LOOK AT THE GEOTECHNICAL PROPERTIES OF SPETER SANDSTONE

Bandopadhyay, S. 13-106 THE EFFECT OF OVERALL PIT SLOPE AND PIT GEOMETRY ON THE DISPERSION OF POLLUTANTS IN A HYPOTHETICAL ARCTIC OPEN-PIT MINE

Bandopadhyay, S. 13-083 CHALLENGES IN CFD MODELING OF AIR FLOW IN OPEN-PIT MINES

Banks, T. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY

Bartlett, J. 13-057 “LIFE-OF-MINE PROCESS SIMULATION FROM DRILL HOLES TO NET PRESENT VALUE”

Bartlett, M. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Basiri, M. 13-085 THE ASSESSMENT OF THE EFFECT OF SILICON CARBIDE PARTICLE SIZE AND THE TYPE OF GATING SYSTEM ON COMPOSITE MICROSTRUCTURE PRODUCED BY LOST FOAM CASTING METHOD


Basson, F. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Bastola, S. 13-149 STRESS DISTRIBUTION AROUND TYPICAL FIELD INTERSECTION GEOMETRIES IN COAL MINES

Batey, R. 13-003 A NON-NUCLEAR DENSITY METER AND MASS FLOW SYSTEM MEASURING MINING SLURRIES WITH ENTRAINED GAS

Bauer, E. 13-013 PHYSIOLOGICAL ANALYSIS OF HUMAN GENERATED HEAT IN A REFUGE ALTERNATIVE

Bays, J. 13-101 ADVANCES IN THE USE OF PASSIVE WETLAND SYSTEMS FOR SELENIUM TREATMENT OF MINE-IMPACTED WATER

Bazin, C. 13-008 EFFECT OF ORE PARTICLE SIZE ON GOLD DISSOLUTION IN A CYANIDE SOLUTION

Bazin, C. 13-156 SIMULATION OF THE INDUSTRIAL SEPARATION OF RARE EARTH ELEMENTS BY SOLVENT EXTRACTION

Bearden, S. 13-039 OCHRE – A NATURAL IRON OXIDE IN THE COLORED PIGMENT MARKET

Beck, T. 13-015 EVALUATIONS OF BIT SLEEVE AND TWISTED-BODY BIT DESIGNS FOR CONTROLLING ROOF BOLTER DUST

Bednarski, T. 13-122 CRUD PROCESSING IMPROVEMENTS USING ACORGA® CB™ 1000 CRUD BUSTING REAGENT

Benndorf, J. 13-038 THE USE OF SENSOR DERIVED DATA IN REAL TIME MINE OPTIMIZATION: A PRELIMINARY OVERVIEW AND ASSESSMENT OF TECHNO-ECONOMIC SIGNIFICANCE

Bennett, C. 13-109 3D FEED BELT IMAGE ANALYSIS

Benzel, W. 13-159 MINERALOGIC AND GEOCHEMICAL CHARACTERISTICS OF URANIUM AND VANADIUM DISTRIBUTION AT A PROPOSED URANIUM IN-SITU RECOVERY SITE, SOUTH DAKOTA

Bernard, T. 13-013 PHYSIOLOGICAL ANALYSIS OF HUMAN GENERATED HEAT IN A REFUGE ALTERNATIVE

Bittner, J. 13-040 TRIBOELECTRIC BELT SEPARATOR FOR BENEFICIATION OF FINE MINERALS

Bizhanov, A. 13-030 MECHANICAL STRENGTH OF THE EXTRUSION BRIQUETTES (BREX)

Blackketter, D. 13-108 CONVECTION MECHANISMS FOR GEOTHERMAL HEAT EXCHANGERS IN A VERTICAL MINE SHAFT


Boakye, K. 13-074 EVOLUTION OF CONTROLLED BLASTING PRACTICES DRAGON PRODUCTS COMPANY, LLC QUARRY OPERATIONS, THOMASTON, ME

Bogunovic, D. 13-072 UPDATE ON DEPLOYMENT OF GAMMA RADIATION CONTROLS FOR SURFACE COAL

Botín, J. 13-031 DEVELOPMENT OF A METHODOLOGY THAT INTEGRATES ENVIRONMENTAL AND SOCIAL VARIABLES IN THE INVESTMENT DECISION PROCESS FOR MINING PROJECTS

Botín, J. 13-032 USING REAL OPTIONS TO MANAGE TECHNICAL RISK IN LIFE OF MINE PLANNING: APPLICATION AT CHUQUICAMATA UNDERGROUND COPPER MINE, CHILE

Botz, M. 13-021 MEASUREMENT OF WEAK AND DISSOCIABLE (WAD) CYANIDE WITH A MODIFIED POTENTIOMETRIC TITRATION

Botz, M. 13-057 “LIFE-OF-MINE PROCESS SIMULATION FROM DRILL HOLES TO NET PRESENT VALUE”

Brennan, M. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Brueggerhoff, S. 13-009 MINING HERITAGE: PRESERVATION AND SUSTAINABLE DEVELOPMENT OF AN OUTSTANDING UNIVERSAL VALUE

Brune, J. 13-044 IMPACT OF NITROGEN INERTIZATION ON METHANE DISTRIBUTION IN BLEEDERLESS LONGWALL GOBS

Bucknam, C. 13-053 ASTM STANDARDIZATION OF THE ACID NEUTRALIZATION POTENTIAL ACIDITY TITRATION IN THE LOW RANGE (ANPAL) FOR INVESTIGATION OF “UNCERTAIN” RESULTS

Bucknam, C. 13-138 THALLIUM REMOVAL THROUGH MODIFICATION OF METAL HYDROXIDE PRECIPITATION SCHEMES

Buhl, B. 13-111 USE OF HIGH EFFICIENCY ELECTRICAL SUBMERSIBLE PUMPS FOR LARGE SCALE MINE DEWATERING

Buxton, M. 13-038 THE USE OF SENSOR DERIVED DATA IN REAL TIME MINE OPTIMIZATION: A PRELIMINARY OVERVIEW AND ASSESSMENT OF TECHNO-ECONOMIC SIGNIFICANCE

Byers, T. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Caldwell, K. 13-119 INCREASING COARSE PARTICLE RECOVERY USING THE FLSMIDTH SELECTIVE FROTH RECOVERY SYSTEM

Camm, T. 13-110 POWER AND POLITICS IN ORGANIZATIONS


Carlton, C. 13-149 STRESS DISTRIBUTION AROUND TYPICAL FIELD INTERSECTION GEOMETRIES IN COAL MINES

Carpenter, D. 13-102 UNDERSTANDING URANIUM ROLL-FRONT FORMATION AIDS IN PREDICTING MINE CLOSURE CHALLENGES

Carr, J. 13-042 PERFORMANCE OF AN INTELLIGENT PROXIMITY DETECTION SYSTEM FOR CONTINUOUS MINING MACHINES

Carr, J. 13-043 USE OF MAGNETIC PROXIMITY DETECTION SYSTEMS IN THE PRESENCE OF COAL

Cecala, A. 13-011 KEY COMPONENTS FOR AN EFFECTIVE FILTRATION AND PRESSURIZATION SYSTEM TO REDUCE RESPIRABLE DUST IN ENCLOSED CABS FOR THE MINING INDUSTRY

Cecala, A. 13-012 HELMET CAM: A TOOL FOR ASSESSING MINERS’ EXPOSURE TO RESPIRABLE DUST IN THE METAL/NONMETAL MINING INDUSTRY

Chae, W. 13-078 BIOFLOTATION OF MALACHITE USING RHODOCOCCUS OPACUS: ROLE OF BACTERIAL GROWTH PHASE

Chae, W. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Chang, N. 13-049 NATURE FRIENDLY SUSTAINABILITY: MINING

Chapleau, C. 13-156 SIMULATION OF THE INDUSTRIAL SEPARATION OF RARE EARTH ELEMENTS BY SOLVENT EXTRACTION

Chelgani, S. 13-115 AN INVESTIGATION ON THE SURFACE CHEMISTRY OF SOME RARE EARTH MINERALS DURING FLOTATION BY TOF-SIMS (I-BENCH SCALE TESTS)

Choi, J. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Choi, J. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Choi, U. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Choudhury, A. 13-106 THE EFFECT OF OVERALL PIT SLOPE AND PIT GEOMETRY ON THE DISPERSION OF POLLUTANTS IN A HYPOTHETICAL ARCTIC OPEN-PIT MINE

Christoffersen, L. 13-121 CEMENTED TAILINGS BACKFILL – IT’S BETTER, NOW PROVE IT!


Chu, H. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Chugh, Y. 13-149 STRESS DISTRIBUTION AROUND TYPICAL FIELD INTERSECTION GEOMETRIES IN COAL MINES

Chugh, Y. 13-148 NUMERICAL ANALYSES OF STABILITY OF THREE-WAY AND FOUR-WAY COAL MINE INTERSECTIONS IN ILLINOIS

Clark, C. 13-061 AN ANALYSIS OF RECENT MSHA ACCIDENT DATA FOR UNDERGROUND METAL MINES USING BACKFILL

Clark, P. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Collingwood, W. 13-083 CHALLENGES IN CFD MODELING OF AIR FLOW IN OPEN-PIT MINES

Conrad, P. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Costa, M. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY

Cousins, B. 13-096 NEW METHODOLOGY ENABLES IMPROVED EVALUATION OF FLOTATION COLLECTORS

Cross, M. 13-109 3D FEED BELT IMAGE ANALYSIS

Curtis, R. 13-075 REDUCING EMISSIONS THROUGH THE USE OF A FUEL BORNE COMBUSTION CATALYST

Dani, N. 13-024 MINERALOGICAL CHARACTERIZATION OF BRAZILIAN KAOLIN ORE USING DIFFUSE REFLECTANCE SPECTROSCOPY

Das, B. 13-027 INVESTIGATIONS ON RECOVERY OF HEMATITE FROM TWO DIFFERENT BANDED IRON ORES BY FLOTATION

Davis, A. 13-126 WROC – AN IMPROVED WASTE ROCK OXIDATION CODE

Davis, A. 13-035 THERMODYNAMIC CONSTRAINTS ON ARSENIC AND HEAVY METALS REMOVAL FROM WATER WITH LIMESTONE-BASED MATERIAL

Davis, J. 13-150 ST. PETER SANDSTONE MINERAL RESOURCE EVALUATION, MISSOURI

Deal, M. 13-029 HAILE GOLD MINE METALLRGY AND FLOWSHEET REVIEW

DeForest, D. 13-099 AQUATIC LIFE CRITERIA ARE PROTECTIVE AGAINST COPPER-CAUSED IMPAIRMENT OF OLFACTION IN SALMONID FISHES


Del Castillo, M. 13-032 USING REAL OPTIONS TO MANAGE TECHNICAL RISK IN LIFE OF MINE PLANNING: APPLICATION AT CHUQUICAMATA UNDERGROUND COPPER MINE, CHILE

Dickinson, W. 13-095 ANTISCALANTS FOR GOLD PROCESSING APPLICATIONS

Diehl, S. 13-159 MINERALOGIC AND GEOCHEMICAL CHARACTERISTICS OF URANIUM AND VANADIUM DISTRIBUTION AT A PROPOSED URANIUM IN-SITU RECOVERY SITE, SOUTH DAKOTA

Dillon-Merrill, R. 13-118 VENTILATION RISK MANAGEMENT IN UNDERGROUND COAL MINES: ATMOSPHERIC MONITORING IN THE UNITED STATES

Ding, Z. 13-100 A CLOSER LOOK AT THE GEOTECHNICAL PROPERTIES OF ST. PETER SANDSTONE

Dixon, D. 13-035 THERMODYNAMIC CONSTRAINTS ON ARSENIC AND HEAVY METALS REMOVAL FROM WATER WITH LIMESTONE-BASED MATERIAL

Dodd, M. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Dolinar, D. 13-023 PERFORMANCE CHARACTERISTICS OF GEOGRID WHEN USED FOR ROOF AND RIB SURFACE CONTROL

Donovan, P. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Druce, I. 13-050 UPDATES ON GEARED VS GEARLESS DRIVE SOLUTIONS FOR GRINDING MILLS

DuCarme, J. 13-042 PERFORMANCE OF AN INTELLIGENT PROXIMITY DETECTION SYSTEM FOR CONTINUOUS MINING MACHINES

Dun, S. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Duran, J. 13-144 AN OVERVIEW OF IMAGING TECHNOLOGIES AT NEWMONT MINE SITES

Durand, J. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY

Eccles, A. 13-089 TAKE TIME FOR PIT PHASE DESIGN

Egan, J. 13-008 EFFECT OF ORE PARTICLE SIZE ON GOLD DISSOLUTION IN A CYANIDE SOLUTION

Eisele, T. 13-147 WATER CHEMISTRY EFFECTS ON ZETA POTENTIAL OF CONCENTRATED HEMATITE ORE


Elkington, T. 13-028 A SIMPLE METHOD TO SELECT A PIT IN THE PRESENCE OF GRADE UNCERTAINTY

Elliot, W. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Emsbo, P. 13-010 TRACE ELEMENTS IN PORPHYRY COPPER SYSTEMS AS STRATEGIC MINERALS

Ennis, S. 13-147 WATER CHEMISTRY EFFECTS ON ZETA POTENTIAL OF CONCENTRATED HEMATITE ORE

Errath, R. 13-139 NEW GENERATION OF GEARLESS MILL DRIVE WHEN HIGH EFFICIENCY MEETS HIGH AVAILABILITY

Evans, C. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Evans, D. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Evans, D. 13-101 ADVANCES IN THE USE OF PASSIVE WETLAND SYSTEMS FOR SELENIUM TREATMENT OF MINE-IMPACTED WATER

Ezell, B. 13-118 VENTILATION RISK MANAGEMENT IN UNDERGROUND COAL MINES: ATMOSPHERIC MONITORING IN THE UNITED STATES

Fahrman, B. 13-088 DETERMINATION OF VOLUMETRIC CHANGES FROM LASER SCANNING AT AN UNDERGROUND LIMESTONE MINE

Farrokh, E. 13-105 A DISCUSSION ON TBM CUTTER CHANGE TIME AND CUTTER LIFE

Fayed, H. 13-077 CFD ANALYSIS OF TWO-PHASE FLOW IN WEMCO-300 M3 SUPERCELL

Ferdosi, B. 13-036 EVALUATION OF TEMPERATURE EFFECT ON P-WAVE VELOCITY, UCS AND ELASTICITY MODULUD OF ROCKS, USING NEWLY DEVELOPED APPARATUS

Figueroa, L. 13-098 THE ECONOMIC RECOVERY OF ZINC FROM MINING INFLUENCED WATER FOR FERTILIZER APPLICATIONS

Figueroa, L. 13-138 THALLIUM REMOVAL THROUGH MODIFICATION OF METAL HYDROXIDE PRECIPITATION SCHEMES

Frederick, L. 13-072 UPDATE ON DEPLOYMENT OF GAMMA RADIATION CONTROLS FOR SURFACE COAL

Frimpong, S. 13-129 ENGINEERING THE HEALTH, SAFETY AND COMFORT OF DUMP TRUCK OPERATORS


Fuerst, A. 13-139 NEW GENERATION OF GEARLESS MILL DRIVE WHEN HIGH EFFICIENCY MEETS HIGH AVAILABILITY

Furlan, J. 13-079 CHARACTERIZATION AND PREDICTION OF FROTH PUMP PERFORMANCE

Gaete, O. 13-112 WAYS TO DEAL WITH MINE/PLANT EFFLUENT RESIDUES: A ROADMAP PROCESS

Gasiorowski, S. 13-040 TRIBOELECTRIC BELT SEPARATOR FOR BENEFICIATION OF FINE MINERALS

Ge, M. 13-100 A CLOSER LOOK AT THE GEOTECHNICAL PROPERTIES OF ST. PETER SANDSTONE

Gebhardt, J. 13-109 3D FEED BELT IMAGE ANALYSIS

Geier, C. 13-086 COLORADO SCHOOL OF MINES MINE RESCUE SIMULATOR

Gensemer, R. 13-099 AQUATIC LIFE CRITERIA ARE PROTECTIVE AGAINST COPPER-CAUSED IMPAIRMENT OF OLFACTION IN SALMONID FISHES

Gentry, J. 13-097 USING CHEMICAL GROUT TO CONTROL GROUNDWATER INFILTRATION

Gillies, S. 13-131 COMPREHENSIVE PRESSURE QUANTITY SURVEY FOR INVESTIGATING THE EFFECTS OF BOOSTER FANS IN A TRONA MINE

Gillies, S. 13-137 PRESSURE AND FLOW INVESTIGATION OF AN AXIAL BOOSTER FAN WITH VARIABLE BLADE SETTINGS – EXPERIMENTAL AND CFD APPROACH

Gillow, J. 13-121 CEMENTED TAILINGS BACKFILL – IT’S BETTER, NOW PROVE IT!

Gilmore, R. 13-044 IMPACT OF NITROGEN INERTIZATION ON METHANE DISTRIBUTION IN BLEEDERLESS LONGWALL GOBS

Gonçalves, Í. 13-024 MINERALOGICAL CHARACTERIZATION OF BRAZILIAN KAOLIN ORE USING DIFFUSE REFLECTANCE SPECTROSCOPY

Goodarzi, A. 13-059 THE EFFECT OF LEGISLATION ON THE DEVELOPMENT OF COAL MINING INDUSTRY

Gorsuch, J. 13-099 AQUATIC LIFE CRITERIA ARE PROTECTIVE AGAINST COPPER-CAUSED IMPAIRMENT OF OLFACTION IN SALMONID FISHES

Govender, D. 13-162 LARGE FLOTATION CELLS IN THE COPPER PROCESSING INDUSTRY – RECENT EXPERIENCES AND FUTURE CONSIDERATIONS (PART 1)


Gow, R. 13-025 SPECTROELECTROCHEMISTRY OF ENARGITE I: REACTIVITY IN ALKALINE SOLUTIONS

Griffin, K. 13-118 VENTILATION RISK MANAGEMENT IN UNDERGROUND COAL MINES: ATMOSPHERIC MONITORING IN THE UNITED STATES

Grubb, J. 13-044 IMPACT OF NITROGEN INERTIZATION ON METHANE DISTRIBUTION IN BLEEDERLESS LONGWALL GOBS

Guzmán, R. 13-031 DEVELOPMENT OF A METHODOLOGY THAT INTEGRATES ENVIRONMENTAL AND SOCIAL VARIABLES IN THE INVESTMENT DECISION PROCESS FOR MINING PROJECTS

Guzmán, R. 13-032 USING REAL OPTIONS TO MANAGE TECHNICAL RISK IN LIFE OF MINE PLANNING: APPLICATION AT CHUQUICAMATA UNDERGROUND COPPER MINE, CHILE

Habashi, E. 13-001 TRAVELLING IN CUBA

Habibi, A. 13-131 COMPREHENSIVE PRESSURE QUANTITY SURVEY FOR INVESTIGATING THE EFFECTS OF BOOSTER FANS IN A TRONA MINE

Habibi, A. 13-137 PRESSURE AND FLOW INVESTIGATION OF AN AXIAL BOOSTER FAN WITH VARIABLE BLADE SETTINGS – EXPERIMENTAL AND CFD APPROACH

Hagadone II, P. 13-161 INCREASED CARBON DIOXIDE ABSORPTION RATES IN CARBONATE SOLUTIONS BY SURFACTANT ADDITION

Häggblad, H. 13-145 VALIDATION OF TUMBLING MILL CHARGE INDUCED TORQUE AS PREDICTED BY SIMULATIONS

Han, Y. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Harrison, T. 13-101 ADVANCES IN THE USE OF PASSIVE WETLAND SYSTEMS FOR SELENIUM TREATMENT OF MINE-IMPACTED WATER

Hart, B. 13-115 AN INVESTIGATION ON THE SURFACE CHEMISTRY OF SOME RARE EARTH MINERALS DURING FLOTATION BY TOF-SIMS (I-BENCH SCALE TESTS)

Harvey, S. 13-133 ROADHEADER PERFORMANCE ON THE CALDECOTT 4TH BORE TUNNEL

Haselhuhn, H. 13-147 WATER CHEMISTRY EFFECTS ON ZETA POTENTIAL OF CONCENTRATED HEMATITE ORE

Hay, M. 13-121 CEMENTED TAILINGS BACKFILL – IT’S BETTER, NOW PROVE IT!


Haynes, J. 13-160 CHALLENGES IN COAL MINE SLOPE CONSTRUCTION

Heatwole, K. 13-126 WROC – AN IMPROVED WASTE ROCK OXIDATION CODE

Heivilin, E. 13-154 RARE EARTHS NOT RARE ANYMORE

Heivilin, E. 13-155 INDUSTRIAL MINERAL SUSTAINABILITY OPPORTUNITY

Heller, T. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Hoal, K. 13-140 AUTOMATED QUANTITATIVE MICRO-MINERALOGICAL CHARACTERIZATION FOR ENVIRONMENTAL APPLICATIONS

Holtzapple, A. 13-057 “LIFE-OF-MINE PROCESS SIMULATION FROM DRILL HOLES TO NET PRESENT VALUE”

Honaker, R. 13-135 NANOBUBBLE COLUMN FLOTATION FOR MORE EFFICIENT COAL RECOVERY

Hong-juan, S. 13-064 MINERALOGICAL CHARACTERISTICS AND APPLICATIONS OF VERMICULITE FROM SEVEN MAJOR MINES IN CHINA

Hong, J. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Hope, G. 13-025 SPECTROELECTROCHEMISTRY OF ENARGITE I: REACTIVITY IN ALKALINE SOLUTIONS

Hrach, E. 13-040 TRIBOELECTRIC BELT SEPARATOR FOR BENEFICIATION OF FINE MINERALS

Huang, H. 13-025 SPECTROELECTROCHEMISTRY OF ENARGITE I: REACTIVITY IN ALKALINE SOLUTIONS

Hufford, R. 13-123 MINE PRODUCTION SCHEDULING OPTIMIZATION AT NEWMONT’S TWIN CREEKS MINE

Hwang, G. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Iannacchione, A. 13-151 SELECTED FACTORS AFFECTING LONGWALL MINE LAYOUTS IN THE PITTSBURGH COALBED OF SOUTHWESTERN PENNSYLVANIA

Iannacchione, N. 13-151 SELECTED FACTORS AFFECTING LONGWALL MINE LAYOUTS IN THE PITTSBURGH COALBED OF SOUTHWESTERN PENNSYLVANIA

Illescas, J. 13-107 ION EXCHANGE AS A PRIMARY PRODUCTION TECHNIQUE IN HYDROMETALLURGY


Ilyas, S. 13-091 FUNGAL LEACHING OF METALS FROM ELECTRONIC SCRAP

Irving, L. 13-075 REDUCING EMISSIONS THROUGH THE USE OF A FUEL BORNE COMBUSTION CATALYST

Jacobson, D. 13-048 PILOT STUDY ON THE INFLUENCE OF THE ECCENTRIC SPEED ON CONE CRUSHER PRODUCTION AND OPERATION

Jahoda, R. 13-066 USING GEOMETALLURGICAL MODELS TO AID IN METALLURGICAL TESTWORK FOR PRE-FEASIBILITY PROJECTS, LA COLOSA, COLOMBIA

Javier, M. 13-049 NATURE FRIENDLY SUSTAINABILITY: MINING

Javier, M. 13-130 MINE PROJECTS 101: CHALLENGES OF TODAY

Jensen, D. 13-157 MOLYBDENUM FLOTATION PRACTICE – CELL TYPE SELECTION AND DESIGN CONSIDERATIONS

Jiangang, J. 13-050 UPDATES ON GEARED VS GEARLESS DRIVE SOLUTIONS FOR GRINDING MILLS

Johnson, M. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Johnson, R. 13-159 MINERALOGIC AND GEOCHEMICAL CHARACTERISTICS OF URANIUM AND VANADIUM DISTRIBUTION AT A PROPOSED URANIUM IN-SITU RECOVERY SITE, SOUTH DAKOTA

Johnson, T. 13-054 BEST PRACTICES IN MATERIAL SELECTION AND DESIGN FOR HYDROMETALLURGICAL EQUIPMENT

Jonsén, P. 13-145 VALIDATION OF TUMBLING MILL CHARGE INDUCED TORQUE AS PREDICTED BY SIMULATIONS

Joy, G. 13-012 HELMET CAM: A TOOL FOR ASSESSING MINERS’ EXPOSURE TO RESPIRABLE DUST IN THE METAL/NONMETAL MINING INDUSTRY

Kalra, R. 13-050 UPDATES ON GEARED VS GEARLESS DRIVE SOLUTIONS FOR GRINDING MILLS

Kaushik, R. 13-051 NEW TRENDS IN ENERGY MANAGEMENT SYSTEMS AND ITS BENEFITS FOR MINING APPLICATIONS

Kawahata, K. 13-123 MINE PRODUCTION SCHEDULING OPTIMIZATION AT NEWMONT’S TWIN CREEKS MINE

Kawatra, S. 13-147 WATER CHEMISTRY EFFECTS ON ZETA POTENTIAL OF CONCENTRATED HEMATITE ORE

Kawatra, S. 13-161 INCREASED CARBON DIOXIDE ABSORPTION RATES IN CARBONATE SOLUTIONS BY SURFACTANT ADDITION


Kecojevic, V. 13-090 ENVIRONMENTAL IMPACT OF DIGGING AND LOADING EQUIPMENT IN SURFACE COAL MINING

Keener, M. 13-151 SELECTED FACTORS AFFECTING LONGWALL MINE LAYOUTS IN THE PITTSBURGH COALBED OF SOUTHWESTERN PENNSYLVANIA

Kelley, D. 13-054 BEST PRACTICES IN MATERIAL SELECTION AND DESIGN FOR HYDROMETALLURGICAL EQUIPMENT

Keogh, E. 13-086 COLORADO SCHOOL OF MINES MINE RESCUE SIMULATOR

Khani, J. 13-037 AN INVESTIGATION OF GROUT PENETRATION DEPTH IN FRACTURED ROCKS

Kidder, J. 13-126 WROC – AN IMPROVED WASTE ROCK OXIDATION CODE

Kim, G. 13-078 BIOFLOTATION OF MALACHITE USING RHODOCOCCUS OPACUS: ROLE OF BACTERIAL GROWTH PHASE

Kim, H. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Kim, H. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Kim, H. 13-078 BIOFLOTATION OF MALACHITE USING RHODOCOCCUS OPACUS: ROLE OF BACTERIAL GROWTH PHASE

Kim, H. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Kim, Sa. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Kim, Sa. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Kim, Se. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Kim, W. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Kim, W. 13-067 COUPLED ROLE OF IONIC STRENGTH AND ION VALENCE ON BUBBLE-MALACHITE INTERACTION

Koenig, A. 13-010 TRACE ELEMENTS IN PORPHYRY COPPER SYSTEMS AS STRATEGIC MINERALS


Kolay, P. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Kolbe, G. 13-024 MINERALOGICAL CHARACTERIZATION OF BRAZILIAN KAOLIN ORE USING DIFFUSE REFLECTANCE SPECTROSCOPY

Korchevskiy, A. 13-117 ASBESTOS MINING IN RUSSIA: APPROACHES TO PUBLIC HEALTH RISK ASSESSMENT

Koski, B. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Kosmoski, C. 13-056 ASSESSING THE SAFETY CULTURE OF UNDERGROUND COAL MINING: A MULTI-METHODOLOGICAL APPROACH

Kosonen, W. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Kramer, R. 13-131 COMPREHENSIVE PRESSURE QUANTITY SURVEY FOR INVESTIGATING THE EFFECTS OF BOOSTER FANS IN A TRONA MINE

Kretschmann, J. 13-009 MINING HERITAGE: PRESERVATION AND SUSTAINABLE DEVELOPMENT OF AN OUTSTANDING UNIVERSAL VALUE

Kumar, D. 13-018 STABILITY ANALYSIS FOR STEEP-SLOPE MINES RECLAIMED USING THE FORESTRY RECLAMANTION APPROACH

Kumar, S. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Kwietnewski, D. 13-133 ROADHEADER PERFORMANCE ON THE CALDECOTT 4TH BORE TUNNEL

Lagory, M. 13-007 ACID BASE ACCOUNTING: LOW-LEVEL DATA COMPARISON OF NET CARBONATE VALUE VERSUS MODIFIED SOBEK PROCEDURES AS DESCRIBED BY THE STATE OF NEVADA

Lagos, G. 13-031 DEVELOPMENT OF A METHODOLOGY THAT INTEGRATES ENVIRONMENTAL AND SOCIAL VARIABLES IN THE INVESTMENT DECISION PROCESS FOR MINING PROJECTS

Lamminmaki, N. 13-048 PILOT STUDY ON THE INFLUENCE OF THE ECCENTRIC SPEED ON CONE CRUSHER PRODUCTION AND OPERATION

Lang, K. 13-111 USE OF HIGH EFFICIENCY ELECTRICAL SUBMERSIBLE PUMPS FOR LARGE SCALE MINE DEWATERING

Langsch, J. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY


Larson, D. 13-065 GEOMETALLURGY FOR A TWO RECOVERY PROCESS OPERATION – CRIPPLE CREEK AND VICTOR GOLD MINE, COLORADO

Lashagri, A. 13-090 ENVIRONMENTAL IMPACT OF DIGGING AND LOADING EQUIPMENT IN SURFACE COAL MINING

Latino, R. 13-005 GERMINATION OF FAILURE: THE ROLE OF HUMAN FACTORS IN EFFECTIVE ROOT CAUSE ANALYSIS

Lee, E. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Lee, J. 13-091 FUNGAL LEACHING OF METALS FROM ELECTRONIC SCRAP

Leichliter, S. 13-065 GEOMETALLURGY FOR A TWO RECOVERY PROCESS OPERATION – CRIPPLE CREEK AND VICTOR GOLD MINE, COLORADO

Leichliter, S. 13-066 USING GEOMETALLURGICAL MODELS TO AID IN METALLURGICAL TESTWORK FOR PRE-FEASIBILITY PROJECTS, LA COLOSA, COLOMBIA

Leinert, J. 13-136 ARE ESTIMATORS GETTING IT RIGHT? COMPARING ACTUAL AND ESTIMATED COSTS

Lelinski, D. 13-162 LARGE FLOTATION CELLS IN THE COPPER PROCESSING INDUSTRY – RECENT EXPERIENCES AND FUTURE CONSIDERATIONS (PART 1)

Leslar, M. 13-041 AUTOMATIC LANDSLIDE MONITORING USING TERRESTRIAL-BASED STATIC LIDAR

Li, J. 13-043 USE OF MAGNETIC PROXIMITY DETECTION SYSTEMS IN THE PRESENCE OF COAL

Liangfei, L. 13-014 BENEFICIATION OF LOW-GRADE LIMONITE ORE BY HIMS-CATIONIC REVERSE FLOTATION AND MAGNETIC ROASTING-LIMS TECHNIQUES

Liebe, R. 13-118 VENTILATION RISK MANAGEMENT IN UNDERGROUND COAL MINES: ATMOSPHERIC MONITORING IN THE UNITED STATES

Lilley, T. 13-033 IMPORTANT CHARACTERISTICS OF MEMBRANES FOR RELIABLE PERFORMANCE IN MINE WASTEWATER TREATMENT SYSTEMS

Liu, G. 13-062 EVALUATION ON THE STRUCTURE-ACTIVITY RELATIONSHIP OF COPPER SULFIDE COLLECTORS BY DFT INVESTIGATION

Liu, X. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES


Lowers, H. 13-159 MINERALOGIC AND GEOCHEMICAL CHARACTERISTICS OF URANIUM AND VANADIUM DISTRIBUTION AT A PROPOSED URANIUM IN-SITU RECOVERY SITE, SOUTH DAKOTA

Lumley, G. 13-113 WHAT WILL HALT THE WORLDWIDE DECLINE IN MINE EQUIPMENT PERFORMANCE?

Luttrell, G. 13-103 CART™: A FUNDAMENTAL TOOL FOR PROCESS CIRCUIT DESIGN

Luxbacher, K. 13-118 VENTILATION RISK MANAGEMENT IN UNDERGROUND COAL MINES: ATMOSPHERIC MONITORING IN THE UNITED STATES

Ma, X. 13-093 APPLICATIONS OF PASSIVE SEISMIC IMAGING IN UNDERGROUND MINING

Mahoski, C. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Manlapig, E. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Marrill, R. 13-092 TRENDS IN CONTROL AND POWER TECHNOLOGIES AND ITS IMPACT FOR MINERAL RECOVERY RATES

Martin, L. 13-061 AN ANALYSIS OF RECENT MSHA ACCIDENT DATAFOR UNDERGROUND METAL MINES USING BACKFILL

Marts, J. 13-044 IMPACT OF NITROGEN INERTIZATION ON METHANE DISTRIBUTION IN BLEEDERLESS LONGWALL GOBS

Martunas, M. 13-074 EVOLUTION OF CONTROLLED BLASTING PRACTICES DRAGON PRODUCTS COMPANY, LLC QUARRY OPERATIONS, THOMASTON, ME

McBride, D. 13-109 3D FEED BELT IMAGE ANALYSIS

McCallum, T. 13-122 CRUD PROCESSING IMPROVEMENTS USING ACORGA® CB™ 1000 CRUD BUSTING REAGENT

McDaniel, S. 13-029 HAILE GOLD MINE METALLRGY AND FLOWSHEET REVIEW

McLemore, V. 13-104 TELLURIUM RESOURCES IN NEW MEXICO

McNearny, R. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Meadows, D. 13-157 MOLYBDENUM FLOTATION PRACTICE – CELL TYPE SELECTION AND DESIGN CONSIDERATIONS


Meadows, D. 13-162 LARGE FLOTATION CELLS IN THE COPPER PROCESSING INDUSTRY – RECENT EXPERIENCES AND FUTURE CONSIDERATIONS (PART 1)

Meyer, J. 13-099 AQUATIC LIFE CRITERIA ARE PROTECTIVE AGAINST COPPER-CAUSED IMPAIRMENT OF OLFACTION IN SALMONID FISHES

Mielli, E. 13-026 NEW TRENDS IN VIDEO ANALYTICS AND SURVEILLANCE SYSTEMS AND ITS POTENTIAL APPLICATIONS FOR THE MINING INDUSTRY

Mielli, E. 13-051 NEW TRENDS IN ENERGY MANAGEMENT SYSTEMS AND ITS BENEFITS FOR MINING APPLICATIONS

Mielli, E. 13-081 THE MINE CENTRAL CONTROL ROOM: FROM CONCEPT TO REALITY

Mielli, E. 13-020 MINING INTELLIGENCE TOOLS - HOW TO CONSOLIDATE INFORMATION AND DRIVE BUSINESS DECISIONS

Mier, R. 13-087 METALS AND MINERALS MINING – PAST AND FUTURE TRENDS

Milosavljevic, E. 13-021 MEASUREMENT OF WEAK AND DISSOCIABLE (WAD) CYANIDE WITH A MODIFIED POTENTIOMETRIC TITRATION

Mischo, H. 13-084 VENTILATION ON DEMAND – STUDY FOR ROOM AND PILLAR MINING IN FLAT SEAMS

Mischo, H. 13-034 EVALUATION OF MATERIALS AND TECHNOLOGIES USED IN MINE SHAFTS RECLAMATION IN FORMER URANIUM ORE MINES IN EASTERN GERMANY - DEVELOPMENT OF A TECHNICAL GUIDELINE

Mishra, B. 13-027 INVESTIGATIONS ON RECOVERY OF HEMATITE FROM TWO DIFFERENT BANDED IRON ORES BY FLOTATION

Modiriasari, A. 13-037 AN INVESTIGATION OF GROUT PENETRATION DEPTH IN FRACTURED ROCKS

Modiriasari, A. 13-036 EVALUATION OF TEMPERATURE EFFECT ON P-WAVE VELOCITY, UCS AND ELASTICITY MODULUD OF ROCKS, USING NEWLY DEVELOPED APPARATUS

Mohanty, M. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Mongeon, P. 13-072 UPDATE ON DEPLOYMENT OF GAMMA RADIATION CONTROLS FOR SURFACE COAL

Montes-Atenas, G. 13-158 EXPERIMENTAL PROTOCOL ENABLING THE USE OF X-RAY PHOTOELECTRON SPECTROSCOPY IN CONCENTRATORCASE STUDY: REGRINDING STAGE


Montoya, P. 13-066 USING GEOMETALLURGICAL MODELS TO AID IN METALLURGICAL TESTWORK FOR PRE-FEASIBILITY PROJECTS, LA COLOSA, COLOMBIA

Moore, L. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY

Moran, P. 13-121 CEMENTED TAILINGS BACKFILL – IT’S BETTER, NOW PROVE IT!

Morillo, C. 13-082 HOW TO OPTIMIZE THE WATER USAGE AT THE WHOLE OPERATION IN 4 KEY STEPS

Morrison, D. 13-019 THE NEXT STEP CHANGE IN THE SIZE OF MINING PROJECTS

Morrison, R. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Muñoz, J. 13-031 DEVELOPMENT OF A METHODOLOGY THAT INTEGRATES ENVIRONMENTAL AND SOCIAL VARIABLES IN THE INVESTMENT DECISION PROCESS FOR MINING PROJECTS

Nelson, M. 13-073 ANALYSIS OF RECIRCULATION IN BOOSTER FAN SYSTEMS USING CFD

Noble, A. 13-103 CART™: A FUNDAMENTAL TOOL FOR PROCESS CIRCUIT DESIGN

Noll, J. 13-011 KEY COMPONENTS FOR AN EFFECTIVE FILTRATION AND PRESSURIZATION SYSTEM TO REDUCE RESPIRABLE DUST IN ENCLOSED CABS FOR THE MINING INDUSTRY

Noll, S. 13-084 VENTILATION ON DEMAND – STUDY FOR ROOM AND PILLAR MINING IN FLAT SEAMS

O’Brien, A. 13-012 HELMET CAM: A TOOL FOR ASSESSING MINERS’ EXPOSURE TO RESPIRABLE DUST IN THE METAL/NONMETAL MINING INDUSTRY

Olgren, M. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Olson, T. 13-119 INCREASING COARSE PARTICLE RECOVERY USING THE FLSMIDTH SELECTIVE FROTH RECOVERY SYSTEM

Oraee-Mirzamani, N. 13-059 THE EFFECT OF LEGISLATION ON THE DEVELOPMENT OF COAL MINING INDUSTRY

Oraee, K. 13-059 THE EFFECT OF LEGISLATION ON THE DEVELOPMENT OF COAL MINING INDUSTRY


Organiscak, J. 13-011 KEY COMPONENTS FOR AN EFFECTIVE FILTRATION AND PRESSURIZATION SYSTEM TO REDUCE RESPIRABLE DUST IN ENCLOSED CABS FOR THE MINING INDUSTRY

Organiscak, J. 13-022 EXAMINATION OF WATER SPRAY AIRBORNE COAL DUST CAPTURE WITH THREE WETTING AGENTS

Oskouei, M. 13-045 FRAMEWORK FOR STOCHASTIC MODELING OF DRAGLINE ENERGY EFFICIENCY

Ouellet, V. 13-156 SIMULATION OF THE INDUSTRIAL SEPARATION OF RARE EARTH ELEMENTS BY SOLVENT EXTRACTION

Ourriban, M. 13-156 SIMULATION OF THE INDUSTRIAL SEPARATION OF RARE EARTH ELEMENTS BY SOLVENT EXTRACTION

Pålsson, B. 13-145 VALIDATION OF TUMBLING MILL CHARGE INDUCED TORQUE AS PREDICTED BY SIMULATIONS

Pariseau, W. 13-016 ROLE OF GAS PRESSURE IN UNDERGROUND COAL MINE BURSTS AND BUMPS

Park, Ja. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Park, Je. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Park, K. 13-076 COUPLED ROLE OF SULPHIDIZERS AND XANTHATES ON THE ELECTROKINETIC PROPERTY AND FLOTATION BEHAVIOR OF MALACHITE

Patten, T. 13-007 ACID BASE ACCOUNTING: LOW-LEVEL DATA COMPARISON OF NET CARBONATE VALUE VERSUS MODIFIED SOBEK PROCEDURES AS DESCRIBED BY THE STATE OF NEVADA

Petter, C. 13-024 MINERALOGICAL CHARACTERIZATION OF BRAZILIAN KAOLIN ORE USING DIFFUSE REFLECTANCE SPECTROSCOPY

Phillips, J. 13-096 NEW METHODOLOGY ENABLES IMPROVED EVALUATION OF FLOTATION COLLECTORS

Pietersen, K. 13-140 AUTOMATED QUANTITATIVE MICRO-MINERALOGICAL CHARACTERIZATION FOR ENVIRONMENTAL APPLICATIONS

Popko, A. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Poulos, J. 13-069 WEST ELK MINE: THE CONVERSION FROM AN EXHAUSTING TO A FORCING VENTILATION SYSTEM


Price, J. 13-010 TRACE ELEMENTS IN PORPHYRY COPPER SYSTEMS AS STRATEGIC MINERALS

Prok, G. 13-075 REDUCING EMISSIONS THROUGH THE USE OF A FUEL BORNE COMBUSTION CATALYST

Prott, R. 13-028 A SIMPLE METHOD TO SELECT A PIT IN THE PRESENCE OF GRADE UNCERTAINTY

Pruett, R. 13-024 MINERALOGICAL CHARACTERIZATION OF BRAZILIAN KAOLIN ORE USING DIFFUSE REFLECTANCE SPECTROSCOPY

Ragab, S. 13-077 CFD ANALYSIS OF TWO-PHASE FLOW IN WEMCO-300 M3 SUPERCELL

Rahnama, A. 13-125 APPLICATION OF CLOSE RANGE PHOTOGRAMMETRY TO MONITOR DISPLACEMENTS IN MINES

Raj, K. 13-083 CHALLENGES IN CFD MODELING OF AIR FLOW IN OPEN-PIT MINES

Rasmuson, E. 13-117 ASBESTOS MINING IN RUSSIA: APPROACHES TO PUBLIC HEALTH RISK ASSESSMENT

Rasmuson, J. 13-117 ASBESTOS MINING IN RUSSIA: APPROACHES TO PUBLIC HEALTH RISK ASSESSMENT

Rauscher, M. 13-050 UPDATES ON GEARED VS GEARLESS DRIVE SOLUTIONS FOR GRINDING MILLS

Raval, S. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Ravishankar, S. 13-087 METALS AND MINERALS MINING – PAST AND FUTURE TRENDS

Reed, J. 13-047 ROCKWORKS EARTHAPPS - A FREE COLLECTION OF 74 PROGRAMS FORCREATING GEOLOGICALLY-RELATED DIAGRAMS WITHIN GOOGLE EARTH

Reed, W. 13-012 HELMET CAM: A TOOL FOR ASSESSING MINERS’ EXPOSURE TO RESPIRABLE DUST IN THE METAL/NONMETAL MINING INDUSTRY

Rezaei, S. 13-125 APPLICATION OF CLOSE RANGE PHOTOGRAMMETRY TO MONITOR DISPLACEMENTS IN MINES

Rhee, H. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Richardson, J. 13-120 MODELING AND SIMULATION OF MINERAL PROCESSING CIRCUITS USING JKSIMMET AND JKSIMFLOAT


Rider, J. 13-011 KEY COMPONENTS FOR AN EFFECTIVE FILTRATION AND PRESSURIZATION SYSTEM TO REDUCE RESPIRABLE DUST IN ENCLOSED CABS FOR THE MINING INDUSTRY

Riffo, L. 13-157 MOLYBDENUM FLOTATION PRACTICE – CELL TYPE SELECTION AND DESIGN CONSIDERATIONS

Rosenkranz, J. 13-143 MULTIPLE CRITERIA APPROACH TO MODEL CALIBRATION IN DEM SIMULATION OF COMPACTION PROCESSES

Rostami, J. 13-105 A DISCUSSION ON TBM CUTTER CHANGE TIME AND CUTTER LIFE

Routhier, B. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Rucker, D. 13-132 OPTIMAL STRATEGIES FOR LEACH PAD INJECTION OPERATIONS

Salpeter, D. 13-096 NEW METHODOLOGY ENABLES IMPROVED EVALUATION OF FLOTATION COLLECTORS

Sammarco, J. 13-006 AN OVERVIEW OF NIOSH MINE ILLUMINATION RESEARCH: PAST, PRESENT, AND FUTURE

Sand, A. 13-143 MULTIPLE CRITERIA APPROACH TO MODEL CALIBRATION IN DEM SIMULATION OF COMPACTION PROCESSES

Sarver, E. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Saunders, L. 13-004 CONTAMINANT REMOVAL FROM MINE EFFLUENTS: UNDERSTANDING THE AQUEOUS CHEMISTRY IS KEY

Scarpato, D. 13-074 EVOLUTION OF CONTROLLED BLASTING PRACTICES DRAGON PRODUCTS COMPANY, LLC QUARRY OPERATIONS, THOMASTON, ME

Schreiter, E. 13-034 EVALUATION OF MATERIALS AND TECHNOLOGIES USED IN MINE SHAFTS RECLAMATION IN FORMER URANIUM ORE MINES IN EASTERN GERMANY - DEVELOPMENT OF A TECHNICAL GUIDELINE

Schumacher, O. 13-002 COST ESTIMATING STANDARDS FOR INTERNATIONAL REPORTING OF ORE RESERVES: WHAT ARE THEY? WHAT SHOULD THEY BE?

Schumacher, P. 13-123 MINE PRODUCTION SCHEDULING OPTIMIZATION AT NEWMONT’S TWIN CREEKS MINE

Schwarz, S. 13-120 MODELING AND SIMULATION OF MINERAL PROCESSING CIRCUITS USING JKSIMMET AND JKSIMFLOAT


Seymour, J. 13-061 AN ANALYSIS OF RECENT MSHA ACCIDENT DATAFOR UNDERGROUND METAL MINES USING BACKFILL

Sharifzadeh, M. 13-037 AN INVESTIGATION OF GROUT PENETRATION DEPTH IN FRACTURED ROCKS

Sharifzadeh, M. 13-036 EVALUATION OF TEMPERATURE EFFECT ON P-WAVE VELOCITY, UCS AND ELASTICITY MODULUD OF ROCKS, USING NEWLY DEVELOPED APPARATUS

Shaww, D. 13-107 ION EXCHANGE AS A PRIMARY PRODUCTION TECHNIQUE IN HYDROMETALLURGY

Shier, D. 13-126 WROC – AN IMPROVED WASTE ROCK OXIDATION CODE

Shin, S. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Short, K. 13-081 THE MINE CENTRAL CONTROL ROOM: FROM CONCEPT TO REALITY

Silva, J. 13-018 STABILITY ANALYSIS FOR STEEP-SLOPE MINES RECLAIMED USING THE FORESTRY RECLAMANTION APPROACH

Silva, R. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Sim, S. 13-078 BIOFLOTATION OF MALACHITE USING RHODOCOCCUS OPACUS: ROLE OF BACTERIAL GROWTH PHASE

Slaker, B. 13-088 DETERMINATION OF VOLUMETRIC CHANGES FROM LASER SCANNING AT AN UNDERGROUND LIMESTONE MINE

Smith, A. 13-043 USE OF MAGNETIC PROXIMITY DETECTION SYSTEMS IN THE PRESENCE OF COAL

Smith, K. 13-140 AUTOMATED QUANTITATIVE MICRO-MINERALOGICAL CHARACTERIZATION FOR ENVIRONMENTAL APPLICATIONS

Smith, M. 13-055 AN EVALUATION OF ENGINEERED COVER SYSTEMS FOR MINE WASTE ROCK AND TAILINGS

Sobhy, A. 13-135 NANOBUBBLE COLUMN FLOTATION FOR MORE EFFICIENT COAL RECOVERY

Soderstrom, M. 13-122 CRUD PROCESSING IMPROVEMENTS USING ACORGA® CB™ 1000 CRUD BUSTING REAGENT

Sorensen, J. 13-035 THERMODYNAMIC CONSTRAINTS ON ARSENIC AND HEAVY METALS REMOVAL FROM WATER WITH LIMESTONE-BASED MATERIAL


Spicher, M. 13-029 HAILE GOLD MINE METALLRGY AND FLOWSHEET REVIEW

Spigarelli, B. 13-161 INCREASED CARBON DIOXIDE ABSORPTION RATES IN CARBONATE SOLUTIONS BY SURFACTANT ADDITION

Stammer, J. 13-140 AUTOMATED QUANTITATIVE MICRO-MINERALOGICAL CHARACTERIZATION FOR ENVIRONMENTAL APPLICATIONS

Steele, R. 13-030 MECHANICAL STRENGTH OF THE EXTRUSION BRIQUETTES (BREX)

Steiner, J. 13-145 VALIDATION OF TUMBLING MILL CHARGE INDUCED TORQUE AS PREDICTED BY SIMULATIONS

Stepan, M. 13-061 AN ANALYSIS OF RECENT MSHA ACCIDENT DATAFOR UNDERGROUND METAL MINES USING BACKFILL

Strode, R. 13-117 ASBESTOS MINING IN RUSSIA: APPROACHES TO PUBLIC HEALTH RISK ASSESSMENT

Sunkavalli, S. 13-126 WROC – AN IMPROVED WASTE ROCK OXIDATION CODE

Sweigard, R. 13-018 STABILITY ANALYSIS FOR STEEP-SLOPE MINES RECLAIMED USING THE FORESTRY RECLAMANTION APPROACH

Swirski, A. 13-041 AUTOMATIC LANDSLIDE MONITORING USING TERRESTRIAL-BASED STATIC LIDAR

Tabesh, M. 13-134 AUTOMATIC CREATION OF ORE-SELECTION AND BLAST POLYGONS USING CLUSTERING ALGORITHMS

Tabra, K. 13-112 WAYS TO DEAL WITH MINE/PLANT EFFLUENT RESIDUES: A ROADMAP PROCESS

Takasaki, Y. 13-025 SPECTROELECTROCHEMISTRY OF ENARGITE I: REACTIVITY IN ALKALINE SOLUTIONS

Tao, D. 13-135 NANOBUBBLE COLUMN FLOTATION FOR MORE EFFICIENT COAL RECOVERY

Taylor, P. 13-060 EXTRACTIVE METALLURGY OF RHENIUM: A REVIEW

Tesarik, D. 13-061 AN ANALYSIS OF RECENT MSHA ACCIDENT DATAFOR UNDERGROUND METAL MINES USING BACKFILL

Thibodeau, D. 13-093 APPLICATIONS OF PASSIVE SEISMIC IMAGING IN UNDERGROUND MINING

Thiruvengadam, M. 13-137 PRESSURE AND FLOW INVESTIGATION OF AN AXIAL BOOSTER FAN WITH VARIABLE BLADE SETTINGS – EXPERIMENTAL AND CFD APPROACH


Thiruvengadam, M. 13-114 THREE-DIMENSIONAL CFD MODELING OF PURGING FROM REFUGE CHAMBER

Thiruvengadam, M. 13-116 3D CFD SIMULATION OF AIRFLOW RE-DISTRIBUTION AND ASSOCIATED PRESSURE DROPS INSIDE THE OVERCAST IN UNDERGROUND COAL MINES

Thomas, B. 13-101 ADVANCES IN THE USE OF PASSIVE WETLAND SYSTEMS FOR SELENIUM TREATMENT OF MINE-IMPACTED WATER

Thompson, T. 13-010 TRACE ELEMENTS IN PORPHYRY COPPER SYSTEMS AS STRATEGIC MINERALS

Thornton, R. 13-108 CONVECTION MECHANISMS FOR GEOTHERMAL HEAT EXCHANGERS IN A VERTICAL MINE SHAFT

Tien, J. 13-114 THREE-DIMENSIONAL CFD MODELING OF PURGING FROM REFUGE CHAMBER

Tien, J. 13-116 3D CFD SIMULATION OF AIRFLOW RE-DISTRIBUTION AND ASSOCIATED PRESSURE DROPS INSIDE THE OVERCAST IN UNDERGROUND COAL MINES

Tiravanti, G. 13-082 HOW TO OPTIMIZE THE WATER USAGE AT THE WHOLE OPERATION IN 4 KEY STEPS

Tittes, P. 13-029 HAILE GOLD MINE METALLRGY AND FLOWSHEET REVIEW

Tong-jiang, P. 13-064 MINERALOGICAL CHARACTERISTICS AND APPLICATIONS OF VERMICULITE FROM SEVEN MAJOR MINES IN CHINA

Torma-Krajewski, J. 13-086 COLORADO SCHOOL OF MINES MINE RESCUE SIMULATOR

Traczyk, E. 13-157 MOLYBDENUM FLOTATION PRACTICE – CELL TYPE SELECTION AND DESIGN CONSIDERATIONS

Traczyk, E. 13-162 LARGE FLOTATION CELLS IN THE COPPER PROCESSING INDUSTRY – RECENT EXPERIENCES AND FUTURE CONSIDERATIONS (PART 1)

Trivedi, N. 13-087 METALS AND MINERALS MINING – PAST AND FUTURE TRENDS

Tudini, J. 13-101 ADVANCES IN THE USE OF PASSIVE WETLAND SYSTEMS FOR SELENIUM TREATMENT OF MINE-IMPACTED WATER

Turatti, E. 13-017 MANAGING THE AIR QUALITY IMPACTS OF A GLOBAL DIVERSIFIED MINING COMPANY

Vatterrodt, K. 13-138 THALLIUM REMOVAL THROUGH MODIFICATION OF METAL HYDROXIDE PRECIPITATION SCHEMES


Visintainer, R. 13-079 CHARACTERIZATION AND PREDICTION OF FROTH PUMP PERFORMANCE

Wahl, N. 13-108 CONVECTION MECHANISMS FOR GEOTHERMAL HEAT EXCHANGERS IN A VERTICAL MINE SHAFT

Walqui, H. 13-127 EMPIRE PEBBLE CRUSHING CIRCUIT, GOING BACK TO BASICS, IS THE CRUSHER CRUSHING?

Walton-Day, K. 13-140 AUTOMATED QUANTITATIVE MICRO-MINERALOGICAL CHARACTERIZATION FOR ENVIRONMENTAL APPLICATIONS

Wang, L. 13-114 THREE-DIMENSIONAL CFD MODELING OF PURGING FROM REFUGE CHAMBER

Wang, Y. 13-062 EVALUATION ON THE STRUCTURE-ACTIVITY RELATIONSHIP OF COPPER SULFIDE COLLECTORS BY DFT INVESTIGATION

Ward, I. 13-021 MEASUREMENT OF WEAK AND DISSOCIABLE (WAD) CYANIDE WITH A MODIFIED POTENTIOMETRIC TITRATION

Webb, C. 13-035 THERMODYNAMIC CONSTRAINTS ON ARSENIC AND HEAVY METALS REMOVAL FROM WATER WITH LIMESTONE-BASED MATERIAL

Wedding, N. 13-160 CHALLENGES IN COAL MINE SLOPE CONSTRUCTION

Wei, L. 13-014 BENEFICIATION OF LOW-GRADE LIMONITE ORE BY HIMS-CATIONIC REVERSE FLOTATION AND MAGNETIC ROASTING-LIMS TECHNIQUES

Wempen, J. 13-073 ANALYSIS OF RECIRCULATION IN BOOSTER FAN SYSTEMS USING CFD

Wen, C. 13-014 BENEFICIATION OF LOW-GRADE LIMONITE ORE BY HIMS-CATIONIC REVERSE FLOTATION AND MAGNETIC ROASTING-LIMS TECHNIQUES

Westman, E. 13-088 DETERMINATION OF VOLUMETRIC CHANGES FROM LASER SCANNING AT AN UNDERGROUND LIMESTONE MINE

Westman, E. 13-093 APPLICATIONS OF PASSIVE SEISMIC IMAGING IN UNDERGROUND MINING

Westmoreland, S. 13-012 HELMET CAM: A TOOL FOR ASSESSING MINERS’ EXPOSURE TO RESPIRABLE DUST IN THE METAL/NONMETAL MINING INDUSTRY

Whysner, K. 13-098 THE ECONOMIC RECOVERY OF ZINC FROM MINING INFLUENCED WATER FOR FERTILIZER APPLICATIONS


Wickens, J. 13-029 HAILE GOLD MINE METALLRGY AND FLOWSHEET REVIEW

Wightman, E. 13-094 SIMULATING CONCENTRATORS FROM FEED TO FINAL PRODUCTS USING A MULTI-COMPONENT METHODOLOGY

Wildeman, T. 13-138 THALLIUM REMOVAL THROUGH MODIFICATION OF METAL HYDROXIDE PRECIPITATION SCHEMES

Williams, R. 13-146 CLIMATE CHANGE FOR MINE PLANNERS: SOME FUNDAMENTALS

Winterton, J. 13-046 ESTIMATING THE RESIDUAL INVENTORY OF A LARGE GOLD HEAP LEACH PAD

Winterton, J. 13-132 OPTIMAL STRATEGIES FOR LEACH PAD INJECTION OPERATIONS

Worrall, D. 13-044 IMPACT OF NITROGEN INERTIZATION ON METHANE DISTRIBUTION IN BLEEDERLESS LONGWALL GOBS

Wu, J. 13-071 IMPACT OF SURFACE COAL MINING ON SOIL HYDRAULIC PROPERTIES

Xia, L. 13-115 AN INVESTIGATION ON THE SURFACE CHEMISTRY OF SOME RARE EARTH MINERALS DURING FLOTATION BY TOF-SIMS (I-BENCH SCALE TESTS)

Xiao, J. 13-062 EVALUATION ON THE STRUCTURE-ACTIVITY RELATIONSHIP OF COPPER SULFIDE COLLECTORS BY DFT INVESTIGATION

Xinghua, L. 13-014 BENEFICIATION OF LOW-GRADE LIMONITE ORE BY HIMS-CATIONIC REVERSE FLOTATION AND MAGNETIC ROASTING-LIMS TECHNIQUES

Xu, Z. 13-062 EVALUATION ON THE STRUCTURE-ACTIVITY RELATIONSHIP OF COPPER SULFIDE COLLECTORS BY DFT INVESTIGATION

Yang, X. 13-142 GEOPOLYMER-BASED CONCRETE TO REDUCE CARBON FOOT-PRINT OF CONSTRUCTION INDUSTRY

Yano, R. 13-010 TRACE ELEMENTS IN PORPHYRY COPPER SYSTEMS AS STRATEGIC MINERALS

Yoo, K. 13-068 ARSENIC LEACHING FROM A MINE TAILING BY ACIDITHIOBACILLUS FERROOXIDANS: ROLE OF TEMPERATURE, PH, AND PULP DENSITY

Young, C. 13-025 SPECTROELECTROCHEMISTRY OF ENARGITE I: REACTIVITY IN ALKALINE SOLUTIONS

Yu, S. 13-157 MOLYBDENUM FLOTATION PRACTICE – CELL TYPE SELECTION AND DESIGN CONSIDERATIONS


Zabrusky, K. 13-128 USING DYNAMIC ANISOTROPY TO IMPROVE RESOURCE ESTIMATION

Zhang, J. 13-058 APPLYING AN AFM IN THE STUDY OF THE ADSORPTION OF XANTHATE ON ARSENOPYRITE

Zhang, W. 13-058 APPLYING AN AFM IN THE STUDY OF THE ADSORPTION OF XANTHATE ON ARSENOPYRITE

Zheng, D. 13-114 THREE-DIMENSIONAL CFD MODELING OF PURGING FROM REFUGE CHAMBER

Zhong, H. 13-062 EVALUATION ON THE STRUCTURE-ACTIVITY RELATIONSHIP OF COPPER SULFIDE COLLECTORS BY DFT INVESTIGATION

Zier, J. 13-007 ACID BASE ACCOUNTING: LOW-LEVEL DATA COMPARISON OF NET CARBONATE VALUE VERSUS MODIFIED SOBEK PROCEDURES AS DESCRIBED BY THE STATE OF NEVADA

Zipper, C. 13-141 SATELLITE REMOTE SENSING-BASED ESTIMATES OF BIOMASS PRODUCTION ON RECLAIMED COAL MINES

Kallu, R. 13-063 APPLICATION OF FUZZY SET THEORY TO RMR CLASSIFICATION FOR WEAK AND VERY WEAK ROCK MASSES

Roghanchi, P. 13-063 APPLICATION OF FUZZY SET THEORY TO RMR CLASSIFICATION FOR WEAK AND VERY WEAK ROCK MASSES

Thareja, R. 13-063 APPLICATION OF FUZZY SET THEORY TO RMR CLASSIFICATION FOR WEAK AND VERY WEAK ROCK MASSES


TABLE OF CONTENTS by AUTHOR · carpenter, d. 13-102understanding uranium roll-front formation aids...

Documents

Transcript of TABLE OF CONTENTS by AUTHOR · carpenter, d. 13-102understanding uranium roll-front formation aids...