Taarup 2400 and 2500 series Mounted Disc Mowers€¦ · cooling and lubrication of the entire...
Transcript of Taarup 2400 and 2500 series Mounted Disc Mowers€¦ · cooling and lubrication of the entire...
Taarup 2400 and 2500 seriesMounted Disc Mowers
Disc Mowers offering reliable performance and a clean cut
Taarup offers a new rear mounted disc mower series withworking widths of 2.0 - 3.2 m. Taarup 2400 series offer a very reliable performance, easy handling and high output at low power requirements. The flexible suspensionensures that the mower adapts itself to even the worstground conditions.
Flexible suspension and reliable performance
2
Taarup 2400 series
Flexible suspension for extremeuneven field conditionsTaarup 2400 series offer a very flexible
suspension giving perfect ground contour
following. This ensures that the mower
is able to adapt to extremely uneven field
conditions giving the best mowing result.
The linkage of Taarup 2400 ensures that
the mower is capable of working on steep
angles or in hilly conditions. For extreme
hilly conditions an optional hillside equip-
ment is offered.
The Taarup 2400 series can pivot 35° up
and down without any adjustment.
Easy adjustment of ground pressureA large compensation spring ensures the
best possible support of the cutterbar of
Taarup 2400 series. This gives optimum
ground pressure along the entire cutter-
bar, even under differing conditions and
contours. The ground pressure is easily
and accurately set by adjusting one
spring.
Lift of mower unitOn headlands the mower is lifted without
activating the three-point linkage of
the tractor which needs no adjustment
in the field. A clever and simple solution
ensuring good clearance and eliminating
swath damage.
Convenient transport solutionFor transport the machine is folded
hydraulically from the tractor cab to the
vertical transport position well behind
the tractor ensuring a stable and
steady transport.
Taarup 2400 series offer a very even
swath formation whether it is wide or
narrow. With the optional swath rollers
the swath is separated from the uncut
crop.
Adjustable lifting pinsTaarup 2400 series offer a very easy
mounting on the tractor. When the
machine is parked the lifting pins are
horizontal. The linkage pins are easily
adjusted to match the tractors width,
which enables the mower to cut to its
full working width.
3
Centre suspension for perfect ground contour following
4
Taarup 2500 series offer high performance and easy handling,combined with centre suspension that absorb uneven field surfaces.
Taarup 2500 series
Taarup 2500 series withworking widths ranging
from 2.4 to 4.0 m.
Strong frame for high performance The patented leaf springs are integrated
in the frame of the Taarup 2500 series.
This unique and though simple suspen-
sion design has made it possible to
combine strength, performance and
easy handling.
5
Centre suspension The centre suspension of the Taarup
2500 series ensures perfect ground con-
tour following. Uneven field surfaces are
absorbed by the suspension. The
ground pressure is easily and very
accurately set by the handle on top
of the suspension frame.
Easy coupling and uncouplingWhen the Taarup 2500 series are
parked the lifting pins are horizontal and
the suspension is standing stable on 2
support legs for easy coupling and
uncoupling.
Swath rollersThe Taarup 2500 series can be fitted
with swath rollers in both left and right
hand side.
6
Non Stop safety system Taarup 2400 and 2500 series are fitted
with a Non-Stop breakaway system to
protect the cutterbar.
If hitting an obstacle the Non-Stop break-
away system will swing the machine back-
wards and over the obstacle and then
return it to the original working position.
No need to stop - no time lost.
The famous high specification Taarup
cutterbar is an all welded design with
a high oil capacity ensuring a very low
working temperature. The result is a
smooth and well protected transmission
with a long life expectancy.
The benefits are lower repair and main-
tenance costs - at the same time as a
clean and aggressive cut.
Twisted knivesAll Taarup disc mowers are equipped with
twisted knives as standard.The twisted
knife ensures a clean cut under all condi-
tions, especially under difficult conditions
(light and wet material) where the lift and
efficient transport over the cutterbar is
important.
For very rough conditions (stony and
uneven ground) Taarup offers the Super
Cut or the V-shaped knives as an option
on all machines.
High oil capacity The Taarup cutterbar has been designed
for low maintenance. It has a high oil
capacity ensuring a very low working tem-
perature. This ensures an efficient oil
cooling and lubrication of the entire cutter-
bar.
Each individual disc bearing housing can
be removed in a matter of minutes for easy
maintenance and bearing replacement.
Taarup uses round discs. Round discs
are less susceptible to stone impact and
reduce shock loads in the transmission.
All Taarup disc mowers are equipped
with twisted knives ensuring a perfect cut
and efficient transport over the cutterbar.
Cutterbar with round discs
Taarup 2400 and 2500 series
Technical specifications
Model 2420 2424 2428 2432 2524 2528 2532 2540
Working width (m) 2.00 2.40 2.80 3.20 2.40 2.80 3.20 4.00
Swath board L/R or
swath roller L/R fitted,
approx. (m) 0.9-1.4 1.3-1.8 1.7-2.2 2.1-2.6 1.3-1.8 1.7-2.2 2.1-2.6 2.5-3.0
Weight, approx. (kgs) 510 530 555 585 650 700 775 950
Number of discs (pcs.) 5 6 7 8 6 7 8 10
Stubble height (mm) 35-60 35-60 35-60 35-60 35-60 35-60 35-60 35-60
Disc (rpm) 3000 3000 3000 3000 3000 3000 3000 3000
Power requirement,
minimum (KW/hp) 30/40 33/45 37/50 40/55 33/45 37/50 40/55 50/70
Pto, standard (rpm) 540 540 540 540 540 540 540 540
Pto, optional (rpm) - - - - 1000 1000 1000 1000
Overrun clutch Standard Standard Standard Standard Standard Standard Standard Standard
Friction clutch - - - - Standard Standard Standard Standard
Hydraulic transport folding Standard Standard Standard Standard Standard Standard Standard Standard
7
The Kverneland Group regards the sale of each machine as the start
of a long-term and valuable relationship. To support the relationship,
we provide the vital high quality spare parts and an efficient spare parts service.
Our spare parts are designed to ensure reliability, safety and an optimal
performance of the machines. The quality lies in the innovative construction
work and in the production processes at our production sites.
You can depend on the Kverneland Group to offer a premium service.
It's vital for us!
Vital Parts
Optional equipment • Straw divider
• High skids (20 mm)
• Throwing wings
• Swath rollers left and right
• Swath board left and right
• Lighting kit
KR
OG
AG
ER
09.2
003
Kverneland Group UK Ltd.Walkers Lane, Lea Green, St. HelensMerseyside WA9 4AF, UKPhone +44 1744 853 200, Telefax +44 1744 853 400
Kverneland Ireland Ltd.Hebron Industrial EstateKilkenny, IrelandPhone +353 56 51597, Telefax +353 56 62207
Kverneland International BVHoofdweg 1278, NL-2153 LR Nieuw-Vennep, The NetherlandsP.O. Box 1000, NL-2150 BA Nieuw-Vennep, The NetherlandsPhone +31 252 662 244, Telefax +31 252 687 325
Dealer:
Kverneland Kerteminde AS reserves the rightto make changes in design or to add new features without obligation on implements purchased before or after such changed aremade.
Kverneland Group is thelargest specialised producerand distributor of farmingimplements in the world.The Group is a family of strong brands enabling us to provide both the farmerand the dealer with a uniqueand complete range of highquality products for soilpreparation, grass treatment,seeding, spreading, spraying, potato cultivation and grape harvesting.
www.kvernelandgroup.com
The specialist !Taarup offers the right solution for the forage harvesting. Ongoing develop-ment enables us to be in linewith the demands of modernfarming. Whatever yourdemands may be, we havethe right products and solu-tions.
Please ask for details and leaflets
showing other Taarup products
from our complete product range of
mowers, mounted and trailed mower
conditioners, rakes and tedders,
forage harvesters, balers, bale
wrappers, bale choppers and
feeding equipment.
For further information, visit us at
www.taarup.com