T GUIDE - Anglers' Central Service Centre - Penn … Marine Cat 09 LoRes.pdf · JARVIS MARINE...

PRODUCT

GUIDE 2009

Jarvis Marine Cat 09 5.indd 1Jarvis Marine Cat 09 5.indd 1 27/2/09 6:42:08 PM27/2/09 6:42:08 PM

JARVIS MARINE PRODUCT GUIDE 20092


3JARVIS MARINE PRODUCT GUIDE 2009

The Jarvis Marine range of boating accessories consists of items that are innovative, but most importantly, comprises products that recreational boaters need and want.

We continually strive to improve our boating accessories and we adopt a very stringent quality control system for all products at time of manufacturing, ensuring that anyone who buys a Jarvis Marine product will be completely satisfi ed.

Jarvis Marine boating accessories cater for a wide range of applications with anchors, fuel accessories, electrical accessories and trailer accessories just a part of our growing range. All of our products offer the best value and quality available.

Keeping you, our recreational boating customers, satisfi ed is very important to us. We encourage you to contact us with suggestions for future products or feedback on our existing products. If one of our products doesn’t perform to your expectations, we will do whatever we can to satisfy you.

Lighting Accessories 4

Electrical 6

Anchors, Chains, Ropes & Shackles 8

Safety & Navigation 10

Paddles & Oars 11

Fishing Accessories 13

General Accessories 14

Marine Plumbing 16

Dock, Ski & Tube Ropes 18

Fuel Accessories 20

Marine Screw Kits 22

Marine Hardware 23

Trailer Accessories 24



LIGHTING

TWO PRONG STERN LIGHT BASES

Two prong bases that are required to operate all–round stern lights. Jarvis Marine Stern Bases are available in both nylon and stainless steel.

ALUMINIUM ALL ROUND STERN LIGHTS

Made using lightweight yet strong alloy material and available in 2 shaft lengths of 24” and 36”.

STAINLESS STEEL ALL ROUND STERN LIGHTS

The Jarvis Marine all round stern lights are available in 2 sizes, 24” and 36” poles. Fits into a Jarvis Marine stern base fi tting.

CLAMP-ON ALL ROUND LIGHT JM51278

Waterproof 360 degree all round light with 2 position aluminium clamp. Featuring a 24” pole length the all round light has a high visibility. The light operates with 2 D cell batteries.

CLAMP-ON BI-COLOUR BOW LIGHT JM51279

Waterproof red and green portable bow light with 2 position aluminium clamp. Small boat owners who don’t run electrical systems will fi nd the Jarvis Marine battery powered Clamp on Bow Lights offer a big cost saving and are simple to install. The light operates with 2 D cell batteries.

BI-COLOUR BOW LIGHT – PLUG IN STYLE JM51216

Stowaway bi-colour bow light features a convenient plug-in base that allows the light to be activated or removed quickly and easily and is complete with an anodised aluminium pole.

CLAMP-ON ALL ROUND LIGHT JM51278

BI-COLOUR BOW LIGHT – PLUG IN STYLE JM51216

STAINLESS STEEL ALL ROUND STERN LIGHTS24” JM5124436” JM51246

CLAMP-ON BI-COLOUR BOW LIGHT JM51279

NYLON JM51272

TWO PRONG STERN LIGHT BASES

STAINLESS STEEL JM51270

ALUMINIUM ALL ROUND STERN LIGHTS

24" JM5125136" JM51253

Don’t run the risk of not being seen at night. Install a Jarvis Marine navigation light on your boat. Jarvis Marine has a great range of bow lights and stern lights; we’ve got everything you need to make safety a priority!

ANCHOR STERN LIGHT COMBO JM51260

Made from corrosion resistant stainless steel with 360˚ visibility, this combination anchor and stern light has a compact fold down design and 15.5" shaft length.

ANCHOR STERN LIGHT COMBO JM51260



CLASSIC BI-COLOUR BOW LIGHTS

Combination red and green navigation lights with a low profi le base. The Zamak bow light is triple chrome plated and available in 2 sizes.

Also available is a round style bow light made of stainless steel (JM51208).

STAINLESS STEEL TRANSOM LIGHT JM51240

Round shaped transom light made of marine grade stainless steel.

OUTDOOR FLOATING LANTERN 60065

A Floating lantern that operates on a 6 volt battery. Battery included.

JARVIS WALKER HEAD LAMPS

Great for fi shing at night, eliminates the need to hold a torch leaving both your hands free. Jarvis Walker head lamps are available in a 3 LED with Xenon bulb model and also a 10 LED model.

STAINLESS STEEL TRANSOM LIGHT JM51240

SMALL CHROME ZAMAK JM51202

LARGE CHROME ZAMAK JM51204

CLASSIC BI-COLOUR BOW LIGHTS

ROUND CAST STAINLESS STEEL JM51208

OUTDOOR FLOATING LANTERN 60065

3 LED DELUXE HEADLAMP 423123 LED DELUXE HEADLAMP 4231210 LED DELUXE HEADLAMP 42322



ELECTRICALBATTERY CLIP EXTENSION JM51012

Another great marine accessory item is the Jarvis Marine Battery Clip Extension. Made of corrosion resistant materials, the battery clip extension allows you to connect 12 volt accessories directly to the battery.

BATTERY TIE DOWN STRAPS JM51026

Jarvis Marine Battery Tie-Down Straps are 54” long. These straps are universal and also work great for fuel tanks and other small accessories.

BATTERY TRAYS

Jarvis Marine Battery Trays will keep your battery secure and snug to prevent damage to your boat, equipment and battery. Mounting hardware is included with the trays. Available in 2 sizes: 24M and 27M.

BATTERY BOXES

Jarvis Marine Battery Boxes are made of rigid polypropylene: impervious to battery acid. Supplied with a battery strap, stainless steel mounting hardware and available in 2 sizes, 24M and 27M.

BATTERY POWER STATION JM51025

Determine battery conditions at the touch of a button with a Jarvis Marine Power Station. There are no more hassles opening a battery box to get at terminals. The Power Station includes a 12 volt plug to wire to almost any 12v accessory. A 10amp Circuit Breaker removes hassles of fuses. This unit also features a built in LED battery meter.

BATTERY MASTER SWITCH JM51035

A battery master selecting switch with off/1/all/2 positional settings.

SWITCH PANELS

Jarvis Marine Switch Panels are what you need to replace that jumble of in-line fuses and unswitched circuits. Available in 4 or 6 gang panels and now also a 3 gang panel with a chart light. All switch panels are supplied with fuses and extra labels.

BATTERY CLIP EXTENSION JM51012

BATTERY TIE DOWN STRAPS JM51026

BATTERY TRAYS24M JM5101427M JM51016

BATTERY BOXES24M JM5101827M JM51020

BATTERY POWER STATION JM51025

BATTERY MASTER SWITCH JM51035

4 GANG, ROCKERS & FUSES JM51400

3 GANG, ROCKERS, FUSES & CHART LIGHT JM51402

6 GANG, ROCKERS & FUSES JM51401



IN-LINE FUSE HOLDER JM51404

The Jarvis Marine In-Line Fuse Holder is waterproof and is supplied with a 20 amp Fuse. This inline fuse protects on board equipment from shorts and electrical problems.

POWER SOCKET JM51421

Fitted with a waterproof cover and made from stainless steel.

ELECTRICAL CONNECTOR KIT JM51062

Whether salt water has corroded your wiring, or perhaps you are fi tting a GPS unit into your boat, the Jarvis Marine Electrical Kit has a selection of all the necessary connectors and terminals to do a professional repair or installation on any 12/24-volt electrical fi ttings. Includes heat shrink tubing for water resistant connections.

TOGGLE BOOT JM51300

The toggle boot protects against moisture and dirt and has brass threads to resist corrosion.

BLACK TOGGLE SWITCHES

Black plastic paddle 2 position on/off switch is suitable for aerators or lights. The 3 position on/off/on black toggle switch is suitable for running lights or anchor lights. Both switches are fi tted with locking rings, lever seals and knurled cap nuts.

BRASS TOGGLE SWITCH JM51330

Features a chrome plated brass handle with clearly marked on/off positions. Two screw terminals for easy installation. The switch will accommodate 15 amps at 12v.

ILLUMINATED TOGGLE SWITCHES

Supplied complete with locking ring and cap nut and features a red plastic paddle that illuminates under load. Available in 2 styles: On/Off or On/Off/On. Either switch will accommodate 15 amps at 12v.

PUSH-PULL SWITCHES

The 2 and 3 position switch has a brass body with a chrome plated plastic knob, brass face nut, washer and back up nut and a stainless steel spring for long life.Fits into panels up to 2.5cm thick.

2 POSITION JM513063 POSITION JM51307





ANCHORSCHAINS, ROPES & SHACKLES

DANFORTH ANCHORS

The Jarvis Marine Fluke or Danforth anchor is available in 8, 10, or 16 pounds. This fully galvanized traditional anchor offers proven holding power and is designed to penetrate sand, mud or grassy bottoms. Arc welded, the oversize fl ukes pivot downward into the bottom to set fast, stow away fl at.

GRAPPLING ANCHORS

The Jarvis Marine Grappling Folding anchor is available in 5lb and 7lb and is ideal for small boats or infl atable boats. This anchor is easy to fold out and unfold and stow away.

REEF ANCHORS

Jarvis Marine Reef Anchors are popular for holding bottom over heavy ground. Unlike standard anchors, the prongs on a Reef Anchor are designed to bend so as to release the anchor. Reef anchors are available in four sizes, 6mm prongs, 8mm, 10mm and 14mm.

SILVERLINE ANCHOR ROPE

Jarvis Marine Silverline anchor rope is available in 42 metre lengths in 8, 10 and 12mm diameters. Super strong, this non-slip rope makes pulling up the anchor or tying up the boat easier on your hands. Silver rope is the most commonly used anchor rope and will not absorb water. All ropes are spliced at one end with a galvanized thimble.

ANCHOR CHAINS

Hot dipped galvanized anchor chains are available in ¼” x 4’ and 5/16” x 6’.The ¼” chain has a safe working load of 1300lbs while the 5/16” chain has a safe working load of 1700lbs.

SHACKLES

Jarvis Marine Shackles are available in a wide range in both hot dipped galvanized and 316 stainless steel.Galvanized Anchor Shackle Sizes: ¼”, 5/16”, 3/8” and 7/16”316 Marine Grade Stainless Steel Anchor Shackle Size: 5/16”316 Marine Grade Stainless Steel Straight D Shackle Sizes: 5/16”, 3/8”

SLIP RING ANCHORS

The fully galvanized Jarvis Marine Slip Ring anchor can be used as an alternative to a Reef Anchor especially when conditions are extremely heavy. The advantage is when you want to up anchor it is possible to change direction of pull and so slide the anchor fl ukes out from under any rock or reef it may have jammed into. The Slip Ring anchor is available in 4lb, 5lb, and 6lb.8LB JM50454, 10LB JM50456

16LB JM50458

6MM 35100, 8MM 3510110MM 35102, 14MM 35103

4LB JM50354, 5LB JM503566LB JM50358

5LB JM50306, 7LB JM50308

1/4” JM506045/16” JM50606

GALVANISED1/4” JM550305/16” JM550323/8” JM550347/16” JM55036

STAINLESS5/16” JM55006

STAINLESS STRAIGHT5/16” JM550023/8” JM55004

8MM JM5349910MM JM5270512MM JM52706



SAFETY & NAVIGATION

COMPASS SMALL JM58002

Don’t go to sea without a compass, and never go without a compass you can see! The Jarvis Marine Compasses come with a mounting bracket and are very durable and reliable, the bulb glass is clear and the compass points easy to discern at a glance. On the small compass the compass points are etched in white against a black background.

COMPASS LARGE JM58004

The larger size of this compass makes it easier to read. Another feature of the large compass is that it is illuminated. The points are displayed in white against a blue background.

HORN SAFETY BLASTER JM58210

The Jarvis Marine Horn Safety Blaster is super loud. Mouth operated with light blows of air, it roars out at more than 120 decibels – loud enough to be heard more than a mile away. Environmentally friendly the Jarvis Marine Horn Blaster is also great for sporting events and is made from anti-corrosive materials that will never rust.

SAFETY WHISTLE JM58300

It is wise to attach a whistle to all life jackets on your boat. Jarvis Marine Safety Whistles are both made of durable ABS materials. The Jarvis Marine Safety Whistle is fi tted with a stainless steel split ring and supplied with a lanyard.

5 IN 1 SURVIVAL TOOL JM58306

The Jarvis Marine 5-in1 Safety Whistle has 5 functions including a whistle, compass, mirror, waterproof capsule and a match striker. Also works as a key fl oat and includes a lanyard.

COMPASS SMALL JM58002

COMPASS LARGE JM58004

HORN SAFETY BLASTER JM58210

5 IN 1 SURVIVAL TOOL JM58306

SAFETY WHISTLE JM58300



PADDLES & OARS

TELESCOPIC PADDLE JM56006

The Jarvis Marine Telescopic Paddle is fi tted with a dual telescopic locking device that reduces to 22in and extends to 42in. These paddles are ideal for kayaks and small boats where room is at a premium and oars too big and clumsy. Made from corrosion resistant aluminium shaft and high impact molded blade and handle.

TELESCOPIC BOAT HOOK JM56112

Boat hooks are handy when berthing or picking up mooring buoys. The Jarvis Marine Boat Hook eliminates the need to have a big solid boat hook cluttering your vessel. Our boat hook is fi tted with a non-slip cam lock for secure use and is telescopic, extending from 53in out to 92in.

OARS

Lightweight and durable, Jarvis Marine Oars have an advanced blade design that is moulded to provide maximum power and minimum slippage for effi ciency. The shaft is made from corrosion resistant aluminium and has a diameter of 1 ¼”. Available in 5’ and 6’ lengths.

PADDLES

Jarvis Marine Paddles feature aluminium shafts with high impact plastic handle and moulded blades, available in 4’ and 5’ lengths.

4’ JM56014

5’ JM56022

5’ JM56030

6’ JM56034



FISHING ACCESSORIES

THREE RACK ROD HOLDERS JM52214

Keep your rods ready for action and your tackle tidy. Jarvis Marine 3 Rack Rod Holders are built tough to last and are made from high density white plastic with UV stabilizers making them very durable. They feature a handy place to store your pliers and fi llet knife and all mounting hardware is included.

FLUSH MOUNT ROD HOLDER JM52208

The Jarvis Marine Flush Mount Rod Holder is made from durable, corrosion free ABS materials. Mounts at a 30 degree angle and requires a 2” installation hole.

RAIL MOUNT HOLDER JM52228

If you want a tough long lasting rod holder that is easy to install then look no further than the Jarvis Marine Rail Mount Holder. Made from marine grade 316 stainless steel materials and will fi t onto rail fi ttings of ¾” and 1”.

TOURNAMENT ROD HOLDER JM52202

The Jarvis Marine Tournament Rod Holder pivots up and down and swivels 360 degrees. The unique locking system secures either spinning or baitcasting outfi ts.

KNIFE AND PLIER HOLDER JM52038

Loose knifes and tools can easily cause damage or injury. This heavy duty, durable unit is easily fi xed inside a boat to keep knives and pliers out of harms way yet you can gain quick access to your tools at any time. (Knife and pliers are not included).

JARVIS WALKER PRO FILLET KIT 42039

The Pro Fillet Kit, a must have item for your boat, consists of 2 fi llet knives, a boning knife and also an easy to use sharpening steel. All knives are made from Japanese stainless steel materials and a convenient carry case is supplied.

TSUNAMI BAIT KNIFE WITH SHEATH 42095

TSUNAMI FILLET KNIFE WITH SHEATH 42096

JARVIS WALKER SS SHEARS 42260

JARVIS WALKER TUNGSTEN KNIFE SHARPENER 42261

JARVIS WALKER TEC TOOL FILLETING BOARD 42251

JARVIS WALKER PRO SALTWATER KIT 42006 JARVIS WALKER MULTI

TOOL &TORCH KIT 41249



GENERAL ACCESSORIES

FOLD UP DRINK HOLDERS

When you are on the water fi nding a place to put your can of soft drink or mug of coffee where it won’t spill is solved with the Jarvis Marine Fold Up drink holders. The fold up drink holder is available in white or black with a fi xed bracket that’s easy to install.

CHROME PLATED DRINK HOLDER JM52004

This drink holder from Jarvis Marine has a brass frame that is chrome plated and is supplied with a removable neoprene stubby holder.

DRINK HOLDER WITH SUCTION CUP JM52030

This versatile drink holder is supplied with both a rail mounting and a suction cup. This allows you to place the holder in the most convenient position.

FOAM KEY FLOAT JM52284

Attach your keys to a foam key ring and make your keys easy to fi nd and unsinkable.

TWO-PIECE KEY HOLDER JM52286

A fl oating key ring holder design that has an inner chamber that will remain dry inside even if dropped overboard.

ECONOMY DECK BRUSH JM52702

The Jarvis Marine Economy Deck Brush has a 4’ aluminium handle and has soft bristles that won’t harm your fi nish but will still clean.

DECK BRUSH JM52704

Constructed from anodized aluminium for corrosion resistance, the Jarvis Marine Deck Brush features a telescopic handle that extends from 42in to 63in and comes with a positive non-slip cam lock for more secure use and easy stowing. The Deck Brush attaches to a garden hose and has an on/off switch for water fl ow control. The Jarvis Marine Deck Brush is great for the boat, car or home.

DRINK HOLDER WITH SUCTION CUP JM52030

CHROME PLATED DRINK HOLDER JM52004

DRINK HOLDER FOLD UP WHITE JM52012

DRINK HOLDER FOLD UP BLACK JM52016

FOAM KEY FLOAT JM52284

ECONOMY DECK BRUSH JM52702

DECK BRUSH JM52704

TWO-PIECE KEY HOLDER JM52286



ANTENNA DECK MOUNT JM52253

The Jarvis Marine Antenna Deck Mount is made of heavy duty nylon and is corrosion resistant. This antenna mount is fully adjustable to any angle with easy release lever.

LOWER UNIT LUBE PUMP JM52610

Avoid smelly lubricant running down your arm! The Jarvis Marine Lower Unit Lube Pump fi ts bottles of lower unit lubricant and allows for mess free lube changes. Simply thread the fi tting in the lower drain hole and pump until fi lled.

OUTBOARD MOTOR LOCK JM52612

If you are worried someone might want to borrow your outboard then try the Jarvis Marine Outboard Motor Lock. The lock will secure outboard motors to the transom and the EDC coated steel tube locks over the screws making them inaccessible to theft. The package includes a padlock that fi ts inside the tube making it diffi cult to cut.

FENDER STRAP JM52100

Very easy to install, adjustable and keeps fenders attached to railings and cleats.

FENDER ROPES

Tightly braided and longwearing, Jarvis Marine Fender Ropes are the ideal accessory to go with Jarvis Marine Fenders. The ropes are available in 3/8" diameter, 72 inch lengths in black, white or royal blue colors to suit the trim colors of your boat.

FENDERS

Jarvis Marine Fenders are durable, ribbed and infl atable and feature a UV inhibitor for long lasting protection. These fenders will protect your boat against scratches or worse damage when your boat is tied up to a jetty or mooring berth. Don’t even consider attaching cheap inferior fenders to your boat. Infl atable fenders are the best by a mile! The fenders are all white in color and available in several sizes:

OUTBOARD MOTOR LOCK JM52612 ANTENNA DECK

MOUNT JM52253

LOWER UNIT LUBE PUMP JM52610

FENDER ROPESWHITE JM52380ROYAL JM52381BLACK JM52382

FENDERS4" X 16" JM521085" X 20" JM521126" X 22" JM521168.5" X 27" JM52118

FENDER STRAP JM52100



BILGE PUMP PLUMBING KIT JM57304

The Jarvis Marine Bilge Pump Plumbing Kit contains a 5’ plastic bilge hose, plastic thru-hull fi tting and two stainless steel hose clamps. All that is needed when you replace your bilge!

BILGE PUMPS

It’s comforting to know that when you have taken water in the boat, you can pump it out fast. The best way to achieve this is to install a Jarvis Marine Bilge Pump. Jarvis Marine submersible bilge pumps are fi tted with a stainless steel shaft, oversized motor, tinned marine grade wiring and heavy-duty nylon housing which will provide years of carefree service. There is a wide selection to choose from, ranging from 600 gallons per hour, 800GPH, 1100GPH, 1500GPH up to the 2000GPH fl ow rate.

BILGE PUMP/FLOAT SWITCH KIT JM57418

Buy a bilge pump with a fl oat switch and save.

BILGE PUMP FLOAT SWITCH JM57438

The Jarvis Marine Automatic Bilge Pump Float Switch uses a ball type switch with tinned marine grade wiring to hold up to the harshest conditions. The housing is resistant to oil, fuel, chemicals and salt exposure.

BILGE PUMP 600GPH JM57412 BILGE PUMP 800GPH JM57420

BILGE PUMP 1500GPH JM57430BILGE PUMP 2000GPH JM57435BILGE PUMP 1100GPH JM57426

MARINE PLUMBING



SUBMERSIBLE LIVE WELL PUMP JM57474

Keeping live bait alive is not a problem with the Jarvis Marine Submersible Live Well Pump. Designed to be mounted inboard or out, the pump will push water through to your bait all day and keep them alive and refreshed.

WASH DOWN KIT JM57476

With the Jarvis Marine Wash Down Kit you will be able to keep your boat clean on and off the water. The pump sends out 3.3 gallons of water a minute at 40 psi. The package includes nozzle, fi ttings, pump and fi lter – just connect to a hose and go. Keeping your boat clean on the water will save you hours of work when you come off the water.

BAIT AERATOR JM57102

For coolers, buckets and live-wells, the Jarvis Marine Bait Aerator can be used in salt or freshwater. This unit has a 12 volt pump and is completely portable. Another great feature is the adjustable spray control which helps keep bait alive longer.

JARVIS WALKER AERATOR TWO-SPEED 42320

Battery powered aerator pump suitable for coolers or bait buckets. Operates on D cell batteries and is supplied with a hose and air stone

HOSE CLAMPS

Plumbing can on occasions mean you need to replace hoses and hose clamps. Jarvis Marine Hose Clamps are made from 316 marine grade stainless steel. Three sizes are available that will fi t a multitude of dimensions and are packed in 2 pieces per card.

ASSORTED HOSE CLAMP KIT JM57214

This 4 piece pack is made up of various sizes. Also made from stainless steel.

1/4" TO 5/8" PR JM572021/2" TO 1" PR JM572065/8" TO 1.25" PR JM57210

MANUAL BILGE PUMP JM57004

The self priming Jarvis Marine Manual Bilge Pump is great for evacuating small boats, bilges and dinghies or any place that water collects. Comes complete with a removable hose.



DOCK, SKI & TUBE ROPES

DOCK LINES

How many times have you been caught out not having a dock rope? The Jarvis Marine dock lines are all hand spliced, 3-strand and 3/8” diameter. Make sure you have these lines on your boat.Available in 3 lengths, 15’, 20’ and 25’.

SHOCK DOCK STRAP JM52506

The Jarvis Marine dock strap is 20’ in length and has a built in shock cord. This strap will absorb the shock caused by wakes and waves to protect your boat like no other dock line could ever do. This dock line will never rot and stores in a lot less space.

STRETCH BUNGEE DOCK LINES

These great new dock lines from Jarvis Marine absorb shocks to your boat. The bungee cord is hidden inside the line and two foam fl oats protect the boat from chaffi ng. Available in 4’, 5’ and 6’ lengths.

STRETCH BUNGEE DOCK LINE JM52532

Consists all the same features as the Bungee Dock Line but made to a greater breaking strain with a multi color line. Available in 5’ length.

22 METRE SKI ROPE JM52427

Features a fl oating aluminium handle and made from 16 strand polypropylene.The Jarvis Marine Ski Rope is supplied with a velcro wrap for easy storage and has ultra-violet inhibitors to ensure it will last for many years. Stores wet. Safe Working Load: 95kg.Tensile strength: 476kg.

22 METRE PRO CHAMP SKI ROPE JM52461

Ski like the pros with this quality rope from Jarvis Marine. Made from a 16 strand braided poly material and supplied with a fl oating handle. Ultra-violet inhibitors, Stores wet. Safe Working Load: 95kg.Tensile strength: 476kg.

INFLATABLE TUBE TOW ROPE JM52428

Tow rope for infl atable tubes, 18 metres of rope with a 3 metre take down line and fl oat supplied with a velcro wrap.Ultra-violet inhibitors, Stores wet. Safe Working Load: 235kg.Tensile strength: 1179kg.

STRETCH BUNGEE DOCK LINES4' JM52511, 5' JM52518, 6' JM52525

DOCK LINES15' JM52794, 20' JM52795, 25' JM52796

SHOCK DOCK STRAP JM52506

STRETCH BUNGEE DOCK LINE JM52532



FUEL ACCESSORIES

FUNNEL JM53282

A funnel is a necessity when fi lling fuel tanks with cans. The Jarvis Marine Funnel has a fl exible hose making it simple to fi ll your tank without spilling a drop.

UNIVERSAL MOTOR FLUSHER JM53300

The Jarvis Marine Universal motor fl usher is used to fl ush out the cooling system of your motor and can also be used to test run your motor before heading for the water.

UNIVERSAL LARGE MOTOR FLUSHER JM53302

The fi rst thing anyone should do after spending a day on the water is fl ush the engine to get rid of salt and other impurities. The fl usher allows the cooling system to be fl ushed out using a garden hose.

DELUXE 2 WAY FLUSHER JM53304

For a more thorough fl ush the Jarvis Marine Deluxe 2 Way Flusher has a dual fl ow design that allows the system to be fl ushed out using a garden hose from both intakes.

UNIVERSAL DECK PLATE KEY JM53257

The Jarvis Marine Universal Deck Plate Key is made from 316 marine grade stainless steel.

PRIMER BULBS

Rubber doesn’t last forever, and especially when it is near petroleum-based liquids. For this reason boaters need to check their primer bulbs and fuel lines regularly. Jarvis Marine has specifi c Primer Bulbs to suit 5/16 or 3/8" fi tting.

UNIVERSAL SIZE PRIMER BULB JM53008

The universal Primer Bulb is supplied with 3 different attachments, ¼”, 5/16” and 3/8”. The oversized directional bulb works on all horsepower outboards and UV inhibitors protect it from prolonged exposure to the sun.

UNIVERSAL DECK PLATE KEY JM53257

FUNNEL JM53282

UNIVERSAL SIZE PRIMER BULB JM53008

PRIMER BULB 5/16" (8MM) JM53004 PRIMER BULB 3/8" (10MM) JM53006



UNIVERSAL FUEL LINE JM53010

The Jarvis Marine Universal Fuel Line fi ts all motors and comes complete with a large primer bulb.

MERCURY FUEL LINES

Suits Mercury motors, supplied with fuel line, primer bulb and connectors.Also available is the Mercury line that accepts the metal fi ttings.

YAMAHA FUEL LINE JM53016

Suits Yamaha motors, supplied with fuel line, primer bulb and connectors.

JOHNSON/EVINRUDE FUEL LINE JM53018

Suits Johnson/Evinrude motors, supplied with fuel line, primer bulb and connectors.

SUZUKI FUEL LINE JM53015

Suits Suzuki motors, supplied with fuel line, primer bulb and connectors.

MERCURY FUEL CONNECTORS

Suits Mercury motors. Female and male fi ttings available. Also available Mercury cast aluminium female and male fi ttings.

YAMAHA FUEL CONNECTORS

Suits Yamaha motors, both female and male fi ttings available.

JOHNSON/EVINRUDE FUEL CONNECTORS

Suits Johnson/Evinrude motors, both female and male fi ttings available.

SUZUKI FUEL CONNECTORS

Suits Suzuki motors, both female and male fi ttings available.

FEMALE 2 PRONG 3/8" JM53204MALE 2 PRONG 1/4" NPT JM53205FEMALE 3PC ALU (OLD) JM53210MALE ALU (OLD) JM53211

YAMAHA FEMALE 2 PRONG JM53208YAMAHA MALE 2 PRONG JM53209 FEMALE 2 PRONG JM53206

MALE 2 PRONG JM53207

FEMALE 3/8" 1 PRONG NPT JM53218MALE 1/4" 1 PRONG NPT(463LSA) JM53219

MERC LINE - NEW JM53012MERC LINE W/METAL FITTINGS JM53014



68PC STAINLESS STEEL PAN HEAD SCREWS JM54404

The Jarvis Marine Pan Head Screw Kit is a convenient assorted mix of pan style Phillips head screws that are ideal for marine purposes. The kit contains various size screws and a total of 68 pieces.

68PC STAINLESS STEEL SELF-TAPPING SCREWS JM54406

The Jarvis Marine Self-Tapping Screw Kit is a convenient assorted mix of oval counter sunk style Phillips head screws that are ideal for marine purposes. The kit contains various size screws and a total of 68 pieces.

81PC STAINLESS STEEL MACHINED SCREWS JM54402

The Jarvis Marine Machined Screw Kit is a convenient assorted mix of machined screws, washers and hex nuts that are ideal for marine purposes. The Jarvis Marine 81 pc Machine Screw kit contains 27 screws, 27 washers and 27 hex nuts all made from 316 stainless steel. Each kit holds a selection of screw sizes in lengths for most applications you are likely to encounter.

328PC STAINLESS STEEL HARDWARE ASSORTMENT JM54408

Anyone who has owned a boat knows the value of having a few stainless steel screws on hand. Alternatively, you might be fi tting some new device on your boat, and marine grade 316 stainless steel hardware is the only way to go. The Jarvis Marine 328 Piece Kit contains a variety of screw types and also includes washers and hex nuts. This kit is supplied in a convenient storage container.

1120PC STAINLESS STEEL GIGANTIC HARDWARE ASSORTMENT JM54412

For the boatie who is always working on his craft the Jarvis Marine 1120 Piece Kit is a gigantic assortment of stainless steel screws, nuts, bolts and washers to ensure you always have the right hardware for any project. With this kit you’ll always fi nd the right screw, bolt, washer or nut when you need it.

MACHINE SCREWS PRE PACK

Marine grade stainless steel machine screws available in pre packs and various sizes.

M5 X 25 OVAL HEAD 6PCS JM54417M5 X 40 OVAL HEAD 6PCS JM54416M5 X 50 OVAL HEAD 6PCS JM54415

PAN HEAD SELF TAPPING SCREWS PRE PACK

Marine grade stainless steel pan head self tapping screws available in pre packs and various sizes.

#6 X 1" PAN HEAD 6PCS JM54424#8 X 3/4" PAN HEAD 6PCS JM54422#8 X 1-1/4" PAN HEAD 6PCS JM54423#10 X 1-1/2" PAN HEAD 6PCS JM54421#12 X 2" PAN HEAD 6 PCS JM54420

NUTS AND WASHERS

Hex nuts and stainless washers in pre packs.

M5 HEX NUT 6PCS JM54418M5 FINISHING WASHER 6PCS JM54419

MARINE SCREW KITS



STAINLESS STEEL CLEATS

Many boaties prefer the look and quality of highly polished stainless steel cleats for their pride and joy. Jarvis Marine Stainless Steel Cleats are heavy duty and will remain looking good through the harshest marine environment.

ZAMAK CLEATS

Jarvis Marine Zamak Cleats are triple chrome plated for additional protection.

BLACK NYLON CLEATS

Jarvis Marine Black Nylon Cleats are made from durable high impact materials.

MOORING RING JM54232

Galvanized mooring ring attaches to docks for faster and easier mooring.

COVERED PADLOCK JM54636

A genuine marine grade padlock the Jarvis Marine Covered Padlock is supplied with 2 keys and features a weatherproof cap that fi ts over the keyhole to prevent any internal corrosion.

STAINLESS STEEL QUICK LINKS

Made of 316 grade stainless steel and precision cast. Great for anchor chains and trailer safety chains.

GALVANIZED QUICK LINKS

Galvanized Quick links also suitable for anchor chains and trailer safety chains.

NYLON SNAP HOOK JM52508

Suited to a multitude of purposes and made from a super tough nylon material.

UNIVERSAL SNAP JM54334

The Jarvis Marine Universal Snap is plated steel with a spring loaded feature and is 4” in length. Workload rating of 240lbs.

UTILITY WINCH HOOK JM54336

The Jarvis Marine Utility Hook is perfect for trailer winches and any other heavy duty applications. The hook is made from plated steel with a 1500lb capacity and is 4” in length.

SAFETY SPRING HOOKS

Jarvis Marine Safety Spring Hooks are available in either a plated steel or 316 marine grade stainless steel. Both are 3 1/8” in length and have a work load rating of 300lbs.

EYE SNAP SWIVELS

Jarvis Marine Eye Snap Swivels are made from high grade polished brass materials. Featuring a spring loaded snap these hardware items can be used for a multitude of purposes.

6" JM54002 8" JM54004

4 1/2" JM54032 6" JM54034

4 1/2" JM54036 6" JM54038 8" JM54040

3/16" JM54502 5/16" JM54506

3/16" JM54530 5/16" JM54534

MARINE HARDWARE

PLATED JM54330 STAINLESS JM54304

GAL 3/16" JM54530 SS 3/16" JM54502

3 1/4" BRASS JM54338 3 3/4" BRASS JM543404 1/2" BRASS JM54342 3 3/4" CHROMED BRASS JM54344



1200LB TRAILER WINCH JM59236

The Jarvis Marine 1200lb Trailer Winch is fully galvanised and has an electrostatic coating that resists rust. Also features a two-way ratchet and is supplied with a 20’ winch strap with heavy duty hook. Built with solid gear construction and a gear ratio of 4:1.

1600LB DUAL DRIVE WINCH JM59936

The Jarvis Marine 1600lb Dual Drive Winch is a heavy duty galvanized winch with one-piece solid steel gears and gear pawl. The use of two gears allows for even load distribution eliminating frame torque. The roller handle allows for easy operation and this model is supplied with a 20’ winch strap and a 316 grade stainless steel hook. The Dual Drive winch is built with solid gear construction and a gear ratio of 4:1.

WINCH STRAP JM59818

Invariably winch straps will need replacing at some stage. The Jarvis Marine Winch Strap is made from wide polyester webbing that is 20’ long and has a heavy duty galvanised hook attached.

WINCH CABLE JM59281

Jarvis Marine Winch Cable is a galvanised aircraft grade cable that is 20’ long and has a tensile strength of 4000lbs.

COUPLER LOCK JM59402

For safety and peace of mind attach a Jarvis Marine Coupler Lock to your trailer. While the lock is in place the trailer cannot be used. Made of solid brass with stainless steel shackle pin and two keys are provided.

600LB TRAILER WINCH JM59230

The Jarvis Marine 600lb Trailer Winch is fully galvanized for corrosion protection and is fi tted with a roller grip handle. Built with solid gear construction and a gear ratio of 3:1.

TRAILER ACCESSORIES



TRANSOM TIE DOWN STRAPS JM59810

Jarvis Marine Transom Tie Down Straps will secure the transom of the boat to the trailer. Sold in pairs, the straps are 2” wide, 4’ in length and are fi tted with vinyl coated ‘S’ hooks.

CAM TIE DOWN STRAPS JM59812

For smaller boats and for greater adjustment the Jarvis Marine Cam Style Tie Down Straps will work great. These straps are 1” wide, 6’ in length and sold in pairs.

POLYMER TRAILER ROLLERS

The more discerning boater will appreciate the quality of the Jarvis Marine Polymer Rollers and Stoppers. These rollers are made from a durable moulded polymer blend and are non marking. Jarvis Marine Poly Rollers are resilient, shock-absorbing, roll easily when launching or retrieving your boat and will not be affected by oil, fuel or salt. The 3 Piece Super Bow Roller Kit includes two poly end bells, a poly bow roller and also provided is a ½” shaft. Also available in the Poly series are: Bow Stops, Bow Rollers, Spool Rollers and Wobbler Rollers.

RUBBER TRAILER ROLLERS

Nothing lasts forever and trailer rollers and bow stop rubbers often need replacing. Jarvis Marine Rubber Rollers and Stoppers are manufactured from the best quality rubber. Available in the Rubber series are: Bow Stops, Bow Rollers, Spool Rollers, Keel Rollers.

TRANSOM SUPPORT BRACKET JM59118

Take the strain off your motor when towing with the Jarvis Marine Adjustable Transom Support Bracket. The bracket hooks on to the trailer and then extends out to the desired length to suit the motor in the tilt position. Supporting the leg in this way eliminates the fl ex of a bouncing trailer that transfers through to the main engine support bracket, so there is no strain on the engine bracket.

TRAILER BALL JM59001

The Jarvis Marine Trailer Ball is a chrome plated heavy duty, 50mm diameter steel ball supplied with washer and heavy duty nut that will outlast the life of your trailer and your car.

SPOOL ROLLER POLY JM59612

WOBBLER ROLLER POLY JM59614

BOW ROLLER POLY JM59604

3PC SUPER BOW ROLLER POLY JM59620

BOW STOP POLY JM59610

KEEL ROLLER RUBBER JM59516

BOW ROLLER RUBBER JM59506

SPOOL ROLLER RUBBER JM59512

BOW STOP RUBBER JM59502



BEARING PROTECTORS JM59031

Jarvis Marine Bearing Protectors will enhance the life of your trailer by providing permanent protection against damage from water and dirt entering the wheel bearings.

HUB GREASE CAPS JM59060

Take the worry out of submerging your trailer wheel hubs during launching and loading with Jarvis Marine Hub Caps. Supplied with 2 hub caps and rubber plugs.

BEARING KITS

Don’t get caught travelling with a hot, crumbling bearing. It pays to have a spare bearing kit with you whenever you travel and Jarvis Marine Bearing kits are available to suit both Ford and Holden. Kits include inner and outer bearings, stainless grease seal, dust cap and split pin.

LICENSE HOLDER JM59102

The Jarvis Marine License Holder is made from durable plastic and will fi t onto your trailer easily.

TRAILER SAFETY CHAINS

Jarvis Marine Trailer Safety Chains are zinc plated welded linked chains. They will keep your trailer attached if your hitch fails. The Class I chain is 1 chain with quick link on each end and has a 2000lb rating. The Class 3 chain is two chains with quick links on each chain.

TRAILER JACK JM59214

The Jarvis Marine Trailer Jack is EDC coated inside and out. The Jack features a spoked wheel, a power grip contoured handle, and an innovative built in grease fi tting to keep gears and shaft well lubricated and a swivel swing-away design to keep the jack out of the way when trailering. Supplied with galvanised hardware for easy installation. Don’t get caught out buying cheap trailer jacks, insist on a quality Jarvis Marine trailer jack.

TRAILER JACK WHEEL STOPPER JM59202

The Jarvis Marine Trailer Jack Wheel Stopper is a great idea that will keep your trailer from moving around or putting scratches and dents in drive-ways.

1/4" 2000LBS JM591063/8" 5000LBS JM59108

FORD KIT JM59035HOLDEN KIT JM59039

TRAILER ACCESSORIES


REGION/COUNTRY DISTRIBUTOR PHONE

Asia Pacifi c

Australia Jarvis Walker +61 3 8787 6900

(Tasmania) Tas Fishing Supplies +61 3 6248 5959

(West Australia) Benbow Outdoors +61 8 9302 5552

China Jarvis Walker International +86 21 6356 5078

New Zealand Thompson Walker +64 9 274 7740

USA Watersnake Motors Inc. +1 239 481 5649

Africa

South Africa Apex Walker +27 11 7920 611

Russia Badger Ltd. +7 812 321 8880

Europe

Austria Aquazona +420 386 357 881

Belgium SPRO BV +31 347 320 888

Bosnia Aquazona +420 386 357 881

Bulgaria Aquazona +420 386 357 881

Czech Republic Aquazona +420 386 357 881

Denmark Wiggler AB +0303 798 744

Finland Wiggler AB +0303 798 744

France SPRO BV +31 347 320 888

Germany SPRO BV +31 347 320 888

Hungary SPRO BV +31 347 320 888

Ireland Truetackle +353 1 295 8255

Italy Europesca Sport +39 06 6500 2449

Luxembourg SPRO BV +31 347 320 888

Montenegro Aquazona +420 386 357 881

Netherlands SPRO BV +31 347 320 888

Norway Wiggler AB +0303 798 744

Poland SPRO BV +31 347 320 888

Romania Aquazona +420 386 357 881

Serbia Aquazona +420 386 357 881

Slovakia Aquazona +420 386 357 881

Slovenia Aquazona +420 386 357 881

Sweden Wiggler AB +0303 798 744

Turkey TURAC Dist. +90 532 707 8430

United Kingdom Masterline Walker +44 0 1684 299 000

CONTACT INFORMATION

© 2009 Jarvis Marine International. All Rights Reserved.Specifi cations are subject to change without notice.

Jarvis Marine® are registered trademarks of Jarvis Marine International.

www.jarviswalker.com.auJarvis Marine International Pty. Ltd.297-305 South Gippsland HighwayDandenong South, Victoria 3175 AustraliaACN: 133 252 294

PRODUCT

GUIDE 2009


T GUIDE - Anglers' Central Service Centre - Penn … Marine Cat 09 LoRes.pdf · JARVIS MARINE...

Documents

Transcript of T GUIDE - Anglers' Central Service Centre - Penn … Marine Cat 09 LoRes.pdf · JARVIS MARINE...