SYSTEMS DESIGNED WITH YOUR SAFETY IN MIND · SANS 10400-S: 2011 Edition 3 – NBR – Facilities...
Transcript of SYSTEMS DESIGNED WITH YOUR SAFETY IN MIND · SANS 10400-S: 2011 Edition 3 – NBR – Facilities...
04
05
08
16
18
26
28
36
38
40
42
TABLEOFCONTENTS COMPANY PROFILE
SANS AND YOUR SAFETY
GLASS BALUSTRADES
STAINLESS STEEL BALUSTRADES
CUSTOM STAIRCASES
POOL ENCLOSURES
| 02
CONTACT DETAILS
COMPANYPROFILE
We specialise in the design, manufacture and installation of balustrades, staircases and pool
enclosures in commercial and residential markets.
We are experts in our field and opinion leaders regarding safety and compliance. With the ever-increasing
need to comply with the South African National Standards, also known as SANS, we have developed the
recipe to produce a range of products that are fully compliant while maintaining visually appealing, custom
aesthetic designs that we’re renowned for. Steel Studio consists of a permanent staff team of over 250
employees that is made up of management, a sales and estimating department, research and development,
project managers, draughtsmen, artisans, skilled and semi-skilled workers.
Since inception, we have successfully completed thousands of projects ranging from the smallest residen-
tial to the largest and most prestigious commercial projects.
Our collective management team has several years of experience in the stainless steel, glass and construction
industries and is involved in every aspect of a project’s lifespan from design input right through to installation.
With our full-time, in-house health and safety officers, we are able to ensure that all of our projects are in
compliance with all the health and safety standards required by law.
All of our standard systems are tested and approved by a professional structural engineer, in accordance with
SANS deemed to satisfy requirements. We are dedicated to developing a self-regulated and fully compliant in-
dustry and in an effort to lead from the front we offer balustrades, staircases and pool enclosures that are built
according to the regulations set out by the South African National Standards.
All custom balustrade and staircase systems are designed and tested in consultation with a professional
structural engineer and in accordance with SANS deemed to satisfy requirements.
At Steel Studio, we are concerned about our impact on our surroundings and we are constantly looking to
reduce our carbon footprint. All of our stainless steel is 100% recyclable and recycled materials are used in
the production of stainless steel raw material. Our stainless steel is manufactured following strict environmental
guidelines and principles to ensure the wellbeing of our environment.
Steel Studio is a member of SASSDA (Southern African Stainless Steel Development Association), SAGGA
(South African Glass and Glazing Association), and the MBA North (Master Builders Association North).
CO
MPA
NY
PR
OFILE
| 04
SANS are a set of rules that govern all aspects of the construction of buildings in South Africa, from
foundation to roof. These rules are set out to ensure your building project is safe and can deal with the task
at hand. As South Africa moves towards a far more regulated building industry, more and more professionals
and homeowners are finding themselves on the wrong side of these regulations. From our experience we
have noticed that many homeowners and professionals are unaware of the importance of SANS and the
legal and financial implications they could face if their balustrade or staircase project does not comply with
SANS.
South African Law dictates that any balustrade or staircase installation must comply with the South African
National Standards, and that in order for a building inspector to issue an occupation certificate, the building
inspector needs a certificate stating that a professional structural engineer has tested and approved the
balustrade and/or staircase system in accordance with SANS deemed to satisfy requirements. This
certificate would be in the form of the Form 3: Declaration by a competent person appointed to design a
component or an element of a system, from the National Building Regulations and Building Standards Act,
1977 (Act No. 103 of 1977).
The result of non-compliance is the risk of having to replace the balustrades or staircase systems with new
ones that meet the standards set out by the regulations. This often involves astronomical costs and a long
delay before the client can commence occupation. Not only do you run the risk of having to remove and
replace the systems, but you are also putting the lives of those utilising the building, in danger.
The role of the building owner and architect on any building project is to ensure that the balustrades
are compliant and that the necessary certification is obtained. It is therefore highly recommended
that it is clearly stated on all drawings and/or bill of quantities that the balustrades are a “design and
supply” contract, and that the balustrade and staircase subcontractor must supply a certificate on
completion, stating that the balustrades have been designed and approved by a professional
structural engineer.
WHAT IS SANS AND HOW DOES IT AFFECT YOUR SAFETY?
GLASSBALUSTRADES
In a time of an ever-increasing need to comply with the South African National Standards, Steel
Studio has the recipe to produce a range of compliant balustrades with aesthetically pleasing
leading edge design.
Since our inception, our balustrades have put the finishing touches to some of the most prestigious buildings
in South Africa.
All of our Standard Glass Balustrade systems are tested to comply with:
SABS 0104 Edition 2 1991 – Handrailing and Balustrading (safety aspects)
SANS 10400-A: 2011 Edition 3 – NBR – General Principals and Requirements
SANS 10400-B: 2012 Edition 3 – NBR – Structural design
SANS 10400-D: 2011 Edition 3 – NBR – Public safety
SANS 10400-M: 2011 Edition 3 – NBR – Stairways
SANS 10400-N: 2010 Edition 3 – NBR – Glazing
SANS 10400-S: 2011 Edition 3 – NBR – Facilities for persons with disabilities
SANS 10400-T: 2011 Edition 3 – NBR – Fire protection
SANS 10160-2: 2011 Edition 1.1 – Self-weight and imposed loads
SANS 10160-3: 2011 Edition 1.1 – Wind actions
SANS 10137: 2011 Edition 4 – The installation of glazing in buildings
SANS 1263-1:2006 Edition 3.1 – Park 1: Safety performance of glazing materials under human impact
GLA
SS
BA
LUS
TRA
DE
S
| 08
GLASSBALUSTRADES
RECTANGULAR POSTROUND POST SQUARE POST
RECTANGULAR POSTROUND POST SQUARE POST
min 50dia x 2mm min 40 x 40 x 2mm min 50 x 30 x 2mm
Engineering calculations show that all balustrades that are framed two sides (uprights and glass clamps) requires a minimum of 10mm and possibly up to 20mm thick toughened safety glass dependent on occupancy classification.
In line with structural engineers calculations and SANS 10160 loading requirements, all balustrades will be designed to comply with the relevant occupation categories as outlined in SANS 10160 eg. 0.5kN/m, 1kN/m and 1.5kN/m.
All custom balustrade systems are designed and tested in consultation with a professional structural engineer and in accordance with SANS deemed to satisfy requirements.
All glass balustrades must withstand a 400 Joule soft body impact test.
Engineering calculations show that all balustrades that are framed two sides (uprights and glass clamps) requires a minimum of 10mm and possibly up to 20mm thick toughened safety glass dependent on occupancy classification.
In line with structural engineers calculations and SANS 10160 loading requirements, all balustrades will be designed to comply with the relevant occupation categories as outlined in SANS 10160 eg. 1kN/m, 1.5kN/m and 3kN/m etc.
All custom balustrade systems are designed and tested in consultation with a professional structural engineer and in accordance with SANS deemed to satisfy requirements.
All glass balustrades must withstand a 400 Joule soft body impact test.
STAINLESS STEEL POST AND GLASS BALUSTRADE OPTIONS (COMMERCIAL)
STAINLESS STEEL POST AND GLASS BALUSTRADE OPTIONS (RESIDENTIAL)
GLA
SS
BA
LUS
TRA
DE
S
FRAMELESS GLASS HANDRAIL OPTIONS
ROUND HANDRAIL ON OFFSET BRACKET
SQUARE RECESSED HANDRAIL
ROUND RECESSEDHANDRAIL
RECTANGULAR HANDRAIL ON OFFSET
BRACKET
| 10
FRAMELESS GLASS FIXING OPTIONS
SIDE MOUNTED MOUNTED ONSPIGOTS
HOUSED IN STEELCHANNEL
HOUSED IN CHANNELBY OTHERS
Engineering calculations show that all balustrades that are frameless requires a minimum of 12mm and possibly up to 20mm thick toughened safety glass dependent on occupancy classification.
A Handrail is compulsory in the event that frameless glass is not fixed in a permanent concrete or steel channel.
In line with structural engineers calculations and SANS 10160 loading requirements, all balustrades will be designed to comply with the relevant occupation categories as outlined in SANS 10160 eg. 1kN/m, 1.5kN/m and 3kN/m etc.
All custom balustrade systems are designed and tested in consultation with a professional structural engineer and in accordance with SANS deemed to satisfy requirements.
All glass balustrades must withstand a 400 Joule soft body impact test.
50dia cast adjustable component
cast adjustable bracket cast adjustable bracket
Stainless steel is available in grade 304 180 grit or grade 316 mirror polished finish. One of our qualified sales executives will advise on the correct grade suited to your application.
STAINLESS STEEL BALUSTRADES
In a time of an ever-increasing need to comply with the South African National Standards, Steel
Studio has the recipe to produce a range of compliant balustrades with aesthetically pleasing
leading edge design.
Since our inception, our balustrades have put the finishing touches to some of the most prestigious buildings
in South Africa.
All of our Standard Steel Balustrade systems are tested to comply with:
SABS 0104 Edition 2 1991 – Handrailing and Balustrading (safety aspects)
SANS 10400-A: 2011 Edition 3 – NBR – General Principals and Requirements
SANS 10400-B: 2012 Edition 3 – NBR – Structural design
SANS 10400-D: 2011 Edition 3 – NBR – Public safety
SANS 10400-M: 2011 Edition 3 – NBR – Stairways
SANS 10400-N: 2010 Edition 3 – NBR – Glazing
SANS 10400-S: 2011 Edition 3 – NBR – Facilities for persons with disabilities
SANS 10400-T: 2011 Edition 3 – NBR – Fire protection
SANS 10160-2: 2011 Edition 1.1 – Self-weight and imposed loads
SANS 10160-3: 2011 Edition 1.1 – Wind actions
SANS 10137: 2011 Edition 4 – The installation of glazing in buildings
SANS 1263-1:2006 Edition 3.1– Park 1: Safety performance of glazing materials under human impact
STA
INLE
SS S
TE
EL
BA
LUS
TRA
DE
S
| 18
STAINLESS STEEL BALUSTRADES
RECTANGULAR POSTROUND POST SQUARE POST
min 50dia x 2mm min 40 x 40 x 2mm min 50 x 30 x 2mm
max 100mm air gap
RECTANGULAR POSTROUND POST SQUARE POST
In line with structural engineers calculations and SANS 10160 loading requirements, all balustrades will be designed to comply with the
relevant occupation categories as outlined in SANS 10160 eg. 0.5kN/m, 1kN/m and 1.5kN/m etc.
All custom balustrade systems are designed and tested in consultation with a professional structural engineer and in accordance with
SANS deemed to satisfy requirements.
In line with structural engineers calculations and SANS 10160 loading requirements, all balustrades will be designed to comply with the
relevant occupation categories as outlined in SANS 10160 eg. 1kN/m, 1.5kN/m and 3kN/m etc.
All custom balustrade systems are designed and tested in consultation with a professional structural engineer and in accordance with
SANS deemed to satisfy requirements.
STAINLESS STEEL BALUSTRADE OPTIONS (COMMERCIAL)
STAINLESS STEEL BALUSTRADE OPTIONS (RESIDENTIAL)
Your only SANS compliant solution
| 20
Stainless steel is available in grade 304 180 grit or grade 316 mirror polished finish. One of our qualified sales executives will advise on the correct grade suited to your application.
STA
INLE
SS S
TE
EL
BA
LUS
TRA
DE
S
CUSTOMSTAIRCASES
Steel Studio manufactures and installs a superior range of custom designed spiral, helical and
straight staircase designs.
Steel Studio’s quality in manufacturing and installation is guaranteed as we have selected specific
professional teams in the company for this purpose. All materials used are of high quality as is used in the
manufacturing of our balustrades systems. Our staircases are not only functional but also a labour of fine
workmanship and design.
In line with structural engineers calculations and the relevant SANS loading requirements, all staircases will
be designed to comply with the relevant occupation categories as outlined in SANS 10160.
All custom staircases are designed and tested in consultation with a professional structural engineer and in
accordance with SANS deemed to satisfy requirements.
Staircase structures are manufactured in stainless steel and mild steel material options.
CU
STO
MS
TAIR
CA
SE
SC
USTO
MS
TAIR
CA
SE
S
| 28
POOLENCLOSURES
Although swimming pools are the focus of family fun and recreation, it is your responsibility to
provide protection to avoid drowning fatalities. The first step in securing your pool area is by
installing a pool enclosure to keep out curious and highly mobile toddlers.
Our pool enclosures are custom built to your projects unique specifications. We’re constantly looking to
break new ground and change the way people look at pool enclosures.
| 38
PO
OL
EN
CLO
SU
RE
S
HINGES AND LOCKS FOR POSTS
SELF CLOSING HINGE LOCKABLE LATCH LOCK FOR GLASS SELF CLOSING HINGE
HINGES AND LOCKS FOR GLASS
All Hinges and Locks are imported products.
CONTACTDETAILS
| 42
Head Office Johannesburg 011 608 1963
Nationwide 0861 724 5464
www.steelstudio.co.za
Thanks to our innovation, skills and patented technology, our products meet every
legal requirement, while maintaining the visually appealing, custom aesthetic
designs that we’re renowned for.