Synopsis
2
DESIGN AND FABRICATION OF DROP FORGING MACHINE FOR NON- FERROUS MATERIALS. The advantages that forged components yield are the followin material properties:- 1.Greater fatigue resistance resulting in greater strength 2.Improved microstructure owing to continuous grain flow. 3.Fine grain sie. !."educed chance of voids. #eeping the a$ove advantages our pro%ect wor& is aimed towar designing and fa$rication of cam driven forging machine for forging operations' particularly for non-ferrous materials. machine would have hammer head assem$ly which deforms the %o placed on a stationary anvil. This pro%ect would $e done in the college premises. (roposed Guide- (rof .G.)*+*#, *" * / 0F T / T, / T , upreet.4. .# 1 456 /563 *$hishe&.7 1 411 /558 *&ash.Tel&ur 1 411 /515 )angaru. itaram 1 411 /529
description
preview
Transcript of Synopsis
DESIGN AND FABRICATION OF DROP FORGING MACHINE FOR NON-FERROUS MATERIALS.
The advantages that forged components yield are the following material properties:-1. Greater fatigue resistance resulting in greater strength.2. Improved microstructure owing to continuous grain flow.3. Fine grain size.4. Reduced chance of voids.
Keeping the above advantages our project work is aimed towards designing and fabrication of cam driven forging machine for open-die forging operations, particularly for non-ferrous materials. The machine would have hammer head assembly which deforms the job placed on a stationary anvil.This project would be done in the college premises.
Proposed Guide- Prof .G.BALAKUMARNAME OF THE STUDENTSUSN
Supreet.V.N.K1MV09ME093
Abhishek.J1MV11ME007
Akash.Telkur1MV11ME010
Bangaru.Sitaram1MV11ME025
