ProcessesAC/DC TIG (GTAW)DC Stick (SMAW)Pulsed TIG (GTAW-P)

Input Power 115 – 230 V, 1-Phase

Amperage Range 5 – 210 A

Rated Output 125 A at 15 V, 60% Duty Cycle

Weight Runner package: 133.5 lb. (61 kg)

Light Industrial ApplicationsLight Metal FabricationMaintenance/Repair OperationsLight ManufacturingAutomotive RepairVocational TrainingHobbyist

Syncrowave® 210 TIG/Stick Welding Power Source

Issued July 2013 • Index No. AD/4.6

Power source is warranted for 3 years, parts and labor.Original main power rectified parts are warranted for 5 years.

aluminum filler.

Miller recommends

Easy to use. 1. Turn power on.2. Select Process: AC TIG, DC TIG or DC Stick.3. Set amperage based on material thickness.Then weld! It’s easy as 1,2,3.

Pro-Set™ feature (professional settings)eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display.

Squarewave output with AC balance control features adjustable oxide cleaning which is essential for creating the highest quality aluminum welds.

Pulse control enhances weld bead andpuddle control for improved appearance and quality. Use it to reduce burn through,coordinate the addition of filler material, and reduce the warping effects of distortion by reducing the average heat input.

Fan-On-Demand™ improves power efficiencyand reduces noise and maintenance by decreasing the amount of airbornecontami nants pulled though the machine.

DIG control allows the arc characteristics to be changed for specific applications andelectrodes. Lower the DIG setting for smoothrunning electrodes like E7018 and increase the DIG setting for stiffer, more penetratingelectrodes like E6010.

Allows 115 – 230 V inputvoltage hookups.

Upgradeable and expandable. Front panel memory card data port provides the ability to easily upgrade software and expand product features. VisitMillerWelds.com/TIGSoftware for thelatest software upgrades and expansions.

Auto-Postflow protects the weld end zoneand electrode by optimizing postflow timebased on welding amperage — foradequate shielding every time withoutwaste and no need for adjustment.

Low power draw. Inverter-based powersource provides full welding output from 230 V while drawing less than 30 amps.

High frequency for non-contact arcstarting. Eliminates tungsten and materialcontamination.

Comes complete with:Power source with 10-ft. (3 m)primary cord and MVP™ plugs for115 V and 230 V12-ft. (3.8 m), 150-amp TIG torchwith Dinse connector(#WP1712MFDI50)12-ft. (3.8 m) work cable withclamp and Dinse connectorElectrode holder with DinseconnectorRFCS-14 foot control with 20-ft.cord (#043 554)Regulator/flow gauge and hoseFactory-installed running gear withEZ-Change™ Low Cylinder Rack

Miller Electric Mfg. Co.An ITW Company1635 West Spencer StreetP.O. Box 1079Appleton, WI 54912-1079 USA

MillerWelds.comEquipment Sales US and CanadaPhone: 866-931-9730FAX: 800-637-2315International Phone: 920-735-4554International FAX: 920-735-4125

QuickSpecs

Multi-voltage plug(MVP™) allowsconnection to 115 or230 V receptacles without tools.

2

Control Panel

Rated Output (R.M.S.)

95 A at 13.8 V, 60% Duty Cycle

90 A at 13.6 V, 60% Duty Cycle

70 A at 22.8 V, 60% Duty Cycle

125 A at 15 V, 60% Duty Cycle

114 A at 14.6 V, 60% Duty Cycle

90 A at 23.6 V, 60% Duty Cycle

InputPower

115 V

230 V

WeldingProcess

DC TIG

AC TIG

DC Stick

DC TIG

AC TIG

DC Stick

Max. Open-Circuit Voltage

47 VDC

Welding Amperage Range

5–125 A

5–125 A

20–90 A

5–210 A

5–210 A

20–150 A

Amps Input atRated Output

17.4 (.58)*

12.4 (.58)*

20.5 (.58)*

11.9 (.35)*

8.62 (.35)*

11.9 (.35)*

Net Weight

Runner package:133.5 lb. (61 kg)

Dimensions

H: 31.5 in. (800 mm)

W: 18.5 in.(470 mm)

D: 43 in.(1092 mm)

Specifications (Subject to change without notice.)

67

9

8

1

4

5

11

10

23

Certified by Canadian Standards Association to both the Canadian and U.S. Standards.

Performance DataInputPower

1-Phase

Stick (SMAW)Duty Cycle

150 A, 20%90 A, 60%60 A, 100%

AC TIG MaterialThickness Range

.020–1/4 in.

DC TIG MaterialThickness Range

.020–1/4 in.

Stick Electrode Maximum Diameter

6010: 5/32 in. 7018: 1/8 in.6013: 1/8 in. 7024: 3/32 in.

TIG (GTAW)Duty Cycle

210 A, 20%125 A, 60%95 A, 100%

1. Voltmeter Display

2. Ammeter Display

3. Output Contactor “On” Indicator

4. AC TIG Process Menu ParametersAmperage 5 – 210 ABalance* 60 – 80%Frequency 100 Hz (Expandable)Pulse Off –50 PPSPostflow Auto/Off – 50 seconds

5. Encoder Control

6. Menu Ranges

7. DC TIG Process Menu ParametersAmperage 5 – 210 APulse Off –50 PPS (Expandable)Postflow Auto/Off – 50 seconds

8. DC Stick Process Menu ParametersAmperage 20 –150 ADIG* Off – 100%

9. Process Selector

10. Memory Card Port

11. Activity Indicator

*Pro-Set parameter selectable.

*While idling.IP23S rating — This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered. Operating temperature range is 14 to 104° F (-10 to 40° C). Storage temperature range is -22 to 149° F (-30 to 65° C). Portions of the preceding text are contained in EN 60974-10: “Electromagnetic Compatibility (EMC) product standard for arc welding equipment.”

3

Dual EZ-Change™ Low Cylinder Rack withElevated Gun and Cable Rack #300 337Dual cylinder rack allows operators to easily rollcylinders on and off the rack with no lifting. Gunand cable rack keeps cables off the floor andtangle free.

Elevated Gun and Cable Rack #300 335For use with single cylinder rack. (Included withDual EZ-Change Low Cylinder Rack.)

Protective Cover #195 142Features side pocket. (Not for use with DualCylinder Rack or Elevated Gun and Cable Rack.)

TIG Gloves#249 178 Medium#249 179 Large#249 180 X-LargeDurable goatskin back and palm for extended wearand ultimate dexterity.Flame-resistant cottonfleece back and padded

palm provide excellent protection.

#AK-150MFC Accessory KitAllows welding operators to customize theirstandard Weldcraft WP-17 TIG torch for theirspecific application. Kit converts into 28different torch styles while using the existingcable. Features collets, collet bodies, nozzles,torch heads, handle and more.

TIG Memory Cards

Memory Card (Blank) #301 080Used for transferring software updates and expand -able features from your computer to the machine.

Memory Card Expansion #301 128 DC Pulse ExpansionExpands the DC pulse frequency to 150 PPS max.#301 127 AC Frequency ExpansionProvides the ability to adjust AC frequency from60 to 150 Hz.

Genuine Miller® Accessories

EZ-Access™

ConsumableCompartment

Convenient flip-downcompartment containsstorage for consumables(sold separately).

Additional Features

EZ-Change™

Low Cylinder Rack

Operators no longerneed to lift cylinders.Cylinders now easily roll on and off our EZ-Change™ LowCylinder Rack.

Integrated StorageCompartment andParameter Chart

Convenient compartmentallows for easy storageof cables, foot controlsand power cord adaptersin the machine.

Dual Front Handles

Split handle with rubber grips designed to move machine easilyand provide quickaccessibility to worklead and TIG torch.Handles provideprotection for frontpanel.

Equipment and Options Stock No. Description Qty. Price

Syncrowave® 210 Runner #907 596 Auto-Line™ 115 – 230 VAC, 50/60 Hz

Accessories

Dual EZ-Change Low Cylinder Rack #300 337 Includes Elevated Gun and Cable Rack

Elevated Gun and Cable Rack #300 335 For use with single cylinder rack

Protective Cover #195 142

Air-Cooled TIG Torch #WP1712MFDI50 12-ft. (3.7 m) torch (included with Runner package)#WP1725MFDI50 25-ft. (7.6 m) torch

TIG Gloves See page 3

Accessory Kit #AK-150MFC

TIG Memory Cards

Memory Card (Blank) #301 080

Memory Card Expansion #301 128 DC pulse expansion#301 127 AC frequency expansion

Remote Controls

Wireless Remote Foot Control #300 429 Foot control with wireless 90-ft. (27.4 m) operating range

RFCS-14 HD #194 744 Heavy-duty foot control

RFCS-14 #043 554 Foot control (included with Runner package)

RCC-14 #151 086 Side-to-side (east/west) fingertip control

RCCS-14 #043 688 North/south fingertip control

RHC-14 #242 211 020 Hand control

Educational Resources

Gas Tungsten Arc Welding (TIG) Publication #250 833 To order, call Miller Literature at 866-931-9732 or visit MillerWelds.com/resources/tools

Date: Total Quoted Price:

Ordering Information

Remote Controls

Wireless Remote FootControl #300 429For remote current andcontactor control. Receiverplugs directly into the

14-pin receptacle of Miller machine. 90-foot(27.4 m) operating range.

RFCS-14 HD Foot Control#194 744Maximum flexibility isaccomplished with areconfigurable cord that

can exit the front, back or either side of thepedal. Foot pedal provides remote current andcontactor control. Includes 20-foot (6 m) cordand 14-pin plug.

RCC-14 Remote Contactor and Current Control#151 086 14-pin plug Side-to-side (east/west) rotary-motion fingertipcontrol fastens to TIG torch using two Velcro®

straps. Includes 26.5-foot (8 m) control cord.

RCCS-14 Remote Contactor and CurrentControl #043 688 14-pin plug North/south rotary-motion fingertip controlfastens to TIG torch using two Velcro® straps.Includes 26.5-foot (8 m) control cord.

RHC-14 Hand Control #242 211 020Miniature hand control forremote current and con tactorcontrol. Dimensions: 4 x 4 x3.25 inches (102 x 102 x 83 mm).

Includes 20-foot (6 m) cord and 14-pin plug.

Educational MaterialsTo order, please call Miller Literature at 866-931-9732or visit MillerWelds.com/resources/tools.

Gas Tungsten Arc (TIG) Welding Publication#250 833

Genuine Miller® Accessories (Continued)

© 2013 Miller Electric Mfg. Co.

Distributed by: