Synapsis Workstation 2017 - Raytheon Anschütz · PDF fileThe NautoPlex collects data from...
Transcript of Synapsis Workstation 2017 - Raytheon Anschütz · PDF fileThe NautoPlex collects data from...
Synapsis Workstation(Chart-) Radar, ECDIS and Conning
• Safety and effi ciency through “any function at any place”
• Integrated redundancies
(as a multifunctional workstation)
• Intelligent central alert management for safety and
reduced stress
• Fewer and standardized components for a less error-
prone installation, thus better reliability
• Streamlined sensor collection increases fl exibility and
reduces cabling efforts
• Radar video on LAN
(integration of Anschütz NautoScan NX radar sensor)
• Standardized hardware simplifi es installation, improves
logistics and facilitates services
• Software simplifi es confi guration and service
BENEFITS AT A GLANCERadar, ECDIS and conning applications by Raytheon Anschütz
offer advanced functionality beyond basic IMO requirements to
contribute to safer navigation and more efficient watchkeeping.
Synapsis Workstations are available as a multifunctional
workstation with access to all nautical applications or as a
stand-alone system for a single application only. All applications
on the Synapsis Workstations use a standardized HMI and provide
central and local modes for dimming and color. Different color
palettes are available for day and night operations.
Standardized hardware components and an innovative network
simplify installation and offer high flexibility for future
adaptations and needed redundancy.
Synapsis Workstations
MULTIFUNCTIONAL WORKSTATIONS
Synapsis Workstations can be easily configured according to
customer’s individual requirements –from a radar or ECDIS
workplace up to a fully integrated multifunctional workstation.
The workstations are based on the innovative and advanced
“next generation” system architecture.
With standardized hardware components and an innovative
network the “next generation” NX architecture significantly
improves flexibility, reliability and simplifies installation and
maintenance.
Software (Radar, ECDIS and/or Conning)
Small Marine Computer (SMC) and NautoPlex
Radar Operator Panel NautoScan NX Radar Transceiver
Console and Display
Radar Transceiver 1 Radar Transceiver 2
Switch 1 Switch 2
Sensors 1e.g.: GPS 1, GPS 2, Log, AIS,
Echosounder, Navtex, Wind, RPM
Sensors 2e.g.: GPS 1, GPS 2, Log, AIS,
Echosounder, Navtex, Wind, RPM
Small Marine Computer (SMC)
Small Marine Computer (SMC)
NautoPlex 1 NautoPlex 2
… …… …
… …
Multiple workstations (Radar / ECDIS / Conning) can be added
Multiple workstations (Radar / ECDIS / Conning) can be added
Workstation 3,4,5…
Workstation 1
Workstation 2 Workstation 3,4,5…
INTELLIGENT SYSTEM ARCHITECTURE WITH BUILT-IN SAFETY The intelligent system architecture reduces complexity of the system.
The new NX architecture reduces complexity and offers high
scalability, redundancy, and flexibility as well as a better resistance
to failures.
The Small Marine Computer (SMC) is the standard hardware
for all workstations. The NautoPlex collects data from all
serial attached sensors and distributes the data via LAN to the
workstations. The radar video is also distributed via LAN to
the workstations. Having all data enabled to LAN, additional
workstations can be easily added to the system. Each workstation
provides data processing and distribution.
Benefits:· No need for analog radar video distribution
· No reduced performance due to damping in the video
distribution
· No need for extensive cabling of sensors to all individual
workstations
· No need for NMEA boosters for serial attached sensors
· No reduced functionality in case of single point failures
Each function at each workstation with full redundancy leads to
secure ship operation.
SYNAPSIS (CHART-) RADARAll along Raytheon Anschütz radars have been known to be
among the most sensitive navigation radars. Thanks to advanced
radar technologies and intelligent functions, a strong detection
performance ensures highest standard of safety even under
rough weather conditions.
Synapsis NSX Radars offer the benefits provided with the
Synapsis Workstation generation. In addition the radar includes
advanced functions which contribute to optimized target pre-
sentation, a clear situational picture and right decision making
with regards to collision avoidance and safe navigation.
A clearly structured display of all control functions and status
indications as well as a dedicated radar operator panel further
ease operation.
Central target managementThe target management associates targets from individual
sensors to create new system-level targets for better situational
assessment.
SeaScoutSeaScout intuitively and efficiently supports the navigator in
finding a safe way through traffic and avoiding situations of
possible collision. The function analyzes the movement of plotted
objects and determines in which areas the danger for a possible
collision is exceptionally high. These areas are graphically
displayed on the screen.
For details about NautoScan NX radar transceivers, please refer to the NautoScan NX brochure.
• High-fi delity radar video via LAN
(Anschütz NautoScan NX radar transceivers)
• Square radar display to maximize the situational picture
• Manual and automatic target acquisition and tracking
• Advanced functions for anti-clutter and target presentation
• Various functions beyond IMO requirements intuitively
support situation assessment (e.g. combining Trial
Maneuver and SeaScout collision avoidance tool)
• Integration of AIS targets
• Chart radar function (chart underlay to simplify
interpretation of the radar video)
• Integrated handling of sensor data, automatic selection
of best data (CCRS)
• Compliant with latest IMO regulations, incl. test standard
IEC 62388 ED2
• Easy installation, low installation cost
(NX architecture)
FEATURES AT A GLANCE
Synapsis Chart RadarSynapsis Radar
®
Target trails also available in relative mode, help to clarify traffi c situations
ARPA Automatic tracking / plotting of up to 70 targets,
offers full control even in dense traffi c. ARPA functionality
remains available in different display modes e.g. when
switching from north-up to head-up.
Chart radar conditions
Antenna sensitivity controls incl. manual or automatic anti-clutter controls
Echo expansions: enlarges tiny, nearby targets
Own ship data provided by several sensors
Target association of ARPA and AIS targets, to avoid the presentation of two full targets symbols for the same physical target. The function can be enabled or disabled. If the AIS and radar information become suffi ciently different, the association is cancelled and two targets are displayed, no alarm is raised.
Cursor information in radar video range
To combat clutter caused by rain, the Synapsis Radar offers, apart from the common FTC function an advanced anti-clutter capability, which measures the actual rain attenuation and applies continuous fi ltering.
SeaScout Radar operator panel
SYNAPSIS ECDISRaytheon Anschütz offers an advanced ECDIS (Electronic Chart
Display and Information System) with intelligent and powerful
functions for route planning and route monitoring.
The base for Synapsis ECDIS is a clear presentation of voyage
related information, the vessel’s position relative to shore and
structures, traffic separation zones, restricted areas, or other
ships. Beyond this, advanced functions are available which
account for safety at sea and effectively support and disburden
the master in long ranged business.
All deliveries include access to the maker specific online ECDIS-
training. A partner network of land-based training facilities is
also available.
More information under: www.raytheon-anschuetz.com/ecdistraining/
Chart formats / availability• C-Map ENC (paper chart equivalence)
• C-Map Professional +
• S 57/S 63 1.1 Encrypted ENC
• DNC
• ARCS
ECDIS in track control modeSynapsis ECDIS
• Manual and automatic route planning function
• ETA calculator, tidal prediction mode and optional
weather chart overlay
• Look ahead zones and advanced functions for route
monitoring / anti-grounding
• Display of NAVTEX messages / areas of danger, AIS and
ARPA targets
• AIS server function, chart / route server function
• Support of Temporary and Preliminary (T&Ps) Notices to
Mariners (NMs)
• Track control Cat. C with Anschütz autopilots
• Options: Radar video overlay, tender tracking, weather
chart overlay
• Integrated handling of sensor data, automatic selection
of best data (CCRS)
• Compliant with latest standards of IMO, IHO and IEC
including IEC 61174 Ed.4.0 and IHO Presentation Library
Annex A Ed. 4.0 to S-52 Ed. 6.1.
• Online operator training acc. to STCW
• Easy installation, low installation cost
(NX architecture)
FEATURES AT A GLANCE
Weather chart overlay (option)The integrated weather overlay combines sea chart and weather
chart in one display to optimize route planning with regard to
fuel-efficiency, safety, on-time arrivals and travel comfort.
A comprehensive set of weather parameters can be chosen and
presented as values or symbols on a separate layer as needed.
If individual weather forecast values exceed the preset limits,
the values are shown graphically as weather warnings. Synapsis
ECDIS imports the weather data via a standardized GRIBfile
from a weather data provider of owner‘s choice.
ECDIS night color
SYNAPSIS CONNING NXSynapsis Conning NX is the centralized data display for the
ship’s command. It makes available all bridge navigation and
machine status data easily at a glance. The combination of
different instruments and indications at a central display
increases situational awareness even in critical situations of
maneuvring and dockingand provides the operator with
efficient help in right decision making; thus Conning NX is
a strong contributor to safety at sea.
As a standard the Conning NX features different display modes
for different manoeuvring situations and for different types of
equipment, such as a navigation data display page, a docking
display page, a heading and rudder movement recording page,
an instruments page, or a track control page. Conning NX also
provides the central HMI for INS functions such as sensor
management, intelligent central alert monitoring and system
health monitoring.
Conning NX is a versatile and extremely capable software. It
allows creating individual display pages and even the imple-
mentation of additional functionality, including the ability to
control and actuate external hardware interfaces.
• Additional situation awareness, easy to add to a system
• Not only a display: Conning allows operation of various
functions (depending on the individual configuration, e.g.
sensor selection, centralized alert presentation)
• Compliant to latest IMO standard for bridge alert
management (MSC.302(87))
• Graphics are individually adapted to the specific type of
equipment (like “widgets”)
• Different pre-configured pages for different maneuvering
situations (e.g. navigation, docking, track)
• Flexible application design allows creation of individual
graphics and pages
• Central HMI for functions provided within an integrated
navigation system (INS)
• Easy installation, low installation cost
(NX architecture)
FEATURES AT A GLANCE
Synapsis Conning NX Docking page
Conning application on 12" Synapsis Touch Panel Together with the Synapsis Touch Panels, Conning NX can
provide the HMI for a centralized alert HMI (CAM-HMI) of
the INS, on bridge level or as a bridge alert management system
for DNV Class Notation OSV. Furthermore, thanks to its modular
and user-orientated structure, Conning NX is highly flexible to
integrate various analog and digital displays within customized
display pages. Customer-specific, switchable elements can be
created for dedicated functional pages and to actuate the
respective hardware interfaces.
Thruster page
TECHNICAL DATA
Small Marine Computer
Our Small Marine Computer (SMC) is the standard for all Synapsis Workstations,
making logistics fairly simply and thus shortening service time and cost. The
SMC features a solid-state disk and passive cooling to increase reliability and
lifetime. With its ultra-compact design and powerful processing capabilities,
the SMC is ready for universal use on various ship types.
– Powerful Quadcore i7 microprocessor
– Fanless operation and solid-state SSD
– 1x DVI-I and 2x displayport video outputs
– 24V power supply
NautoPlex
With the new scalable NautoPlex serial to LAN converters all serial sensor
data as well as status information is collected and distributed via LAN to every
workstation. The result: reduced cabling effort and enhanced flexibility.
Radar Operator Panel
Ethernet Switch
ECDIS Operator Panel
159
(6.2
6")
382
(15.
04")
225,1(8.862")
213
(8.3
86")
253,1(9.965")
429(16.89")
642(25.28")
436
(17.
17")
159(6.26")
382(15.04")
225,
1(8
.862
")
213(8.386")
253,
1(9
.965
")
429
(16.
89")
642
(25.
28")
436(17.17")
159(6.3")
213
225
(8.4
")
(8.9")
443
288 28811.3" 11.3"
100
172
3.9"
Space for cable
Space for cable
Height 46
Space for cable
Height 82
265
60 602.4"
2.4"
Glass-front displays
The workstations feature 19"/ 26" wide-screen, glass-front TFT monitors to
increase space for the presentation of radar video, electronic sea charts, and
sensor data. Operators benefit from a clear arrangement of all control
functions and status indications.
TECHNICAL DATA
12" Synapsis Touch Panel
The new Synapsis Touch Panel (STP) is a smart multifunctional
display.The STP is available for mounting into the consoles as a
centralized display for alert management (INS, bridge level or as
NAUT-OSV CAM-HMI) or other specific function (via Conning NX
software modules). The STP is a 12" powerful panel PC with touch
display, solid state disk and low-noise passive cooling.
630,30 Scheibe/glass
117
,40
±1
55,
40 ±
1
559 ±1
prelliminary
8
436
124,50 ±1
21 B
330
±0,
5 5
5,50
5
0,50
620 ±0,5
20
392,20 ±2
21
26
389
±1
595,40 ±1
127 ±1
257
±1
100
A
M
Signalgeber/buzzer
5
A (1 : 1)
ohne Dichtung/without sealing
1,50 B (1 : 1)
E
Display rückseitig (mit Pultplatte)/rear view (with console plate)
D
C (1 : 2)optionally connectors
AC-connector RS232HDMIDVI-IDPY/CCVBS
620 ±0,5
601,40 ±2
395
±2
330
±0,
5
11
55,
50
50,
50 18
23
Gerät-Aussenkante/unit outer edges
Pultausschnitt/console cut-out
4x Bohrung für Gew-Bo. M6/4x hole for thread bolt M6
M6
18
D (1 : 2)
3
3
E (1 : 2)
Freiraumringsum/free spaceall around
G (1 : 2)
Scheibe mit Siebdruck /sheet with silk-screen
57 1
0
H (1 : 2)
Scheibe mit Siebdruck /sheet with silk-screen
K K
J (1 : 1) 001
0,50x45°
8
K-K (1 : 1)M (2 : 5)Signalgeber/buzzer
002
003
Dichtung obenund beidseitig/sealing topand both sides(5x1.5mm)
4x Gewindebolzen/4x theread bolt
Gewicht/weight: 14,0kg 5%
Scheibe/glass
Metallrahmen/metal frame
001
002
001
REL.DATE
SCALE
FINISH
MATERIAL
REV.
FILE NUMBER:
DRAWING TITLE
DRAWN BY E.C.-NO.
DRAWING/PART NUMBER
RELEASED:
PROJECT:
TOLERANCES DIN ISO 2768-mK
SURFACES DIN ISO 1302
MODIFICATION/DESCRIPTION
SIZE ISO A2
003002001000
30.01.201429.10.201312.09.201325.03.2013
PflügerPflügerPflügerPflüger
Steckv-Buzzer versetzt!Buzzer hinzu!RAN-Logo und Detail "Metallrahmen" hinzu!Neuanlage
ja
siehe Stückliste
CON0071C
1:5
Outline Drawing
6026SD R GA12003169
1010267
003
1315-1541315-179420571421046
321
NO. OFCHANGES
G
87654321
1211109871 2 3 4 5
F
D
C
B
A
E
H
G
F
E
A
B
C
D
6
D-80687 MünchenD-97990 Weikersheim
NO
T TO
BE
DIS
CLO
SED
TO
TH
IRD
PA
RTY
WIT
HO
UT
PER
MIS
SON
CO
NR
AC
GM
BH/
Da
ta M
od
ul A
G
630,30 Scheibe/glass
117,40 ±1 55,40 ±1
559 ±1
prelliminary
8
436
124,50 ±1
21 B
330 ±0,5
55,50
50,50
620 ±0,5
20
392,20 ±2
21
26
389 ±1
595,40 ±1
127 ±1
257 ±1 100
A
M
Signalgeber/buzzer
5
A (1 : 1)
ohne Dichtung/without sealing
1,50 B (1 : 1)
E
Display rückseitig (mit Pultplatte)/rear view (with console plate)
D
C (1 : 2)optionally connectors
AC-connector RS232HDMIDVI-IDPY/CCVBS
620 ±0,5
601,40 ±2
395 ±2
330 ±0,5
11
55,50
50,50 18
23
Gerät-Aussenkante/unit outer edges
Pultausschnitt/console cut-out
4x Bohrung für Gew-Bo. M6/4x hole for thread bolt M6
M6
18
D (1 : 2)
3
3
E (1 : 2)
Freiraumringsum/free spaceall around
G (1 : 2)
Scheibe mit Siebdruck /sheet with silk-screen
57
10
H (1 : 2)
Scheibe mit Siebdruck /sheet with silk-screen
K K
J (1 : 1) 001
0,50x45° 8
K-K (1 : 1)M (2 : 5)Signalgeber/buzzer
002
003
Dichtung obenund beidseitig/sealing topand both sides(5x1.5mm)
4x Gewindebolzen/4x theread bolt
Gewicht/weight: 14,0kg 5%
Scheibe/glass
Metallrahmen/metal frame
001
002
001
REL.DATE
SCALE
FINISH
MATERIAL
REV.
FILE NUMBER:
DRAWING TITLE
DRAWN BY E.C.-NO.
DRAWING/PART NUMBER
RELEASED:
PROJECT:
TOLERANCES DIN ISO 2768-mK
SURFACES DIN ISO 1302
MODIFICATION/DESCRIPTION
SIZE ISO A2
003002001000
30.01.201429.10.201312.09.201325.03.2013
PflügerPflügerPflügerPflüger
Steckv-Buzzer versetzt!Buzzer hinzu!RAN-Logo und Detail "Metallrahmen" hinzu!Neuanlage
ja
siehe Stückliste
CON0071C
1:5
Outline Drawing
6026SD R GA12003169
1010267
003
1315-1541315-179420571421046
321
NO. OFCHANGES
G
87654321
1211109871 2 3 4 5
F
D
C
B
A
E
H
G
F
E
A
B
C
D
6
D-80687 MünchenD-97990 Weikersheim
NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSON CONRAC GMBH/ Data Modul AG
26"
642
436
125
19"
429
382
67
314
218
74
– Resolution 26": 1920x1200 pixel
– Resolution 19": 1280x1024 pixel
Registered trademarks
Intel®, INTEL Corp.
Microsoft Corporation
Raytheon Anschütz GmbHHeadquartersD-24100 Kiel, GermanyTel +49(0)431-3019-0Fax +49(0)431-3019-291www.raytheon-anschuetz.com
TECHNICAL DATA
Consoles
All workstations are available in a deckstand version for stand-
alone installations, in a table top version for installation at
the top of a console or in a black box version for integration
into consoles. The range is completed with a trackball and an
operator panel.
536 701546
40°
466
696min. 70150
509
509
664
Subject to change due to technical developments without notice.
® If not otherwise stated, all trademarks including Anschütz andare registered by Raytheon Anschütz GmbH
All rights reserved · Printed in GermanyRAN 801.32 e / L&S 0416