Symantec NetBackup for PATROL - Sentry Software · services your location, ... Installing Symantec...
-
Upload
trinhkhanh -
Category
Documents
-
view
222 -
download
0
Transcript of Symantec NetBackup for PATROL - Sentry Software · services your location, ... Installing Symantec...
User Documentation October 2012
Symantec NetBackup KM forPATROLVersion 2.8.01
Contacting BMC SoftwareYou can access the BMC Software Web site at http://www.bmc.com/. From this Web site, you can obtaininformation about the company, its products, corporate offices, special events, and career opportunities.
United States and Canada Outside United States and Canada
Address BMC Software, Inc.2101 CityWest Blvd. Houston TX 77042-2827
Telephone (01) 713 918 8800
Telephone 713 918 8800 or 800 841 2031
Fax (01) 713 918 8000
Fax 713 918 8000
Copyright 2006 BMC Software, Inc. or licensors, as an unpublished work. All rights reserved.
BMC Software, the BMC Software logos, and all other BMC Software product or service names areregistered trademarks or trademarks of BMC Software, Inc.
IBM is a registered trademark of International Business Machines Corporation.
DB2 is a registered trademark of International Business Machines Corporation.
Oracle is a registered trademark, and the Oracle product names are registered trademarks ortrademarks of Oracle Corporation.
All other trademarks belong to their respective companies.
BMC Software considers information included in this documentation to be proprietary and confidential.Your use of this information is subject to the terms and conditions of the applicable End User LicenseAgreement for the product and the proprietary and restricted rights notices included in thisdocumentation.
Restricted Rights Legend
U.S. Government Restricted Rights to Computer Software. UNPUBLISHED -- RIGHTS RESERVED UNDERTHE COPYRIGHT LAWS OF THE UNITED STATES. Use, duplication, or disclosure of any data andcomputer software by the U.S. Government is subject to restrictions, as applicable, set forth in FARSection 52.227-14, DFARS 252.227-7013, DFARS 252.227-7014, DFARS 252.227-7015, and DFARS252.227-7025, as amended from time to time. Contractor/Manufacturer is BMC Software, Inc., 2101CityWest Blvd., Houston, TX 77042-2827, USA. Any contract notices should be sent to this address.
2
Version 2.8.01
Symantec NetBackup KM for PATROL
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or e-mail. To expedite your inquiry, please see "BeforeContacting BMC Software."
Support Web Site
You can obtain technical support from BMC Software 24 hours a day, 7 days a week at http://www.bmc.com/support_home. From this Web site, you can
Read overviews about support services and programs that BMC Software offers:
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive e-mail notices when new product versions are released
Find worldwide BMC Software support center locations and contact information, including e-mailaddresses, fax numbers, and telephone numbers
Support by Telephone or E-mail
In the United States and Canada, if you need technical support and do not have access to the Web, call800 537 1813. Outside the United States and Canada, please contact your local support center forassistance. To find telephone and email contact information for the BMC Software support center thatservices your location, refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at http://www.bmc.com/support_home.
Before Contacting BMC Software
Before you contact BMC Software, have the following information available so that Customer Support canbegin working on your problem immediately:
Product information
product name
product version (release number)
license number and password (trial or permanent)
Operating system and environment information machine type operating system type, version, andservice pack or other maintenance level such as:
PUT or PTF
system hardware configuration
serial numbers
related software (database, application, and communication) including type, version, and service
pack or maintenance
level
Sequence of events leading to the problem
Commands and options that you used
Messages received (and the time and date that you received them)
product error messages
messages from the operating system, such as "file system full"
3
Version 2.8.01
Symantec NetBackup KM for PATROL
Table of Contents 4
Version 2.8.01
Symantec NetBackup KM for PATROL
Table of Contents...........................................................................................................................8Release Notes for v2.8.01
...........................................................................................................................10Overview
...........................................................................................................................10Preparing for Installation
...........................................................................................................................10Requirements
..................................................................................................................11System Requirements
..................................................................................................................12Software Requirements
..................................................................................................................14Security Requirements
..................................................................................................................19Disk Space Requirements
...........................................................................................................................20Getting the BMC Software Installation Utility
...........................................................................................................................21Packages
...........................................................................................................................21Extracting the Setup Files
...........................................................................................................................21Installing the KM
...........................................................................................................................22Installing Symantec NetBackup KM for PATROL
...........................................................................................................................34Uninstalling Symantec NetBackup KM for PATROL
...........................................................................................................................39Upgrading the Platform
...........................................................................................................................39Loading/Unloading the KM
..................................................................................................................40Loading the KM
..............................................................................................................40Loading the KM on PATROL Console
..............................................................................................................40Loading the KM on PATROL Central
..............................................................................................................41Configuring the PATROL Agent to Preload the KM
..................................................................................................................42Unloading the KM
..............................................................................................................42Unloading the KM from the PATROL Agent
..............................................................................................................43Unloading the KM from the PATROL Console
..............................................................................................................43Unloading the KM from the PATROL Central Console
...........................................................................................................................44Performing Post-Installation Operations
..................................................................................................................44Configuring the KM User Account
..................................................................................................................46Verifying Application Discovery
..................................................................................................................46Checking the Instance Limits
..................................................................................................................48Checking the Initial Setup
..................................................................................................................48Restarting PATROL Agent and PATROL Console
...........................................................................................................................48Integrating the KM
...........................................................................................................................49Integrating with BMC Portal
Table of Contents 5
Version 2.8.01
Symantec NetBackup KM for PATROL
...........................................................................................................................49Integrating with BMC ProactiveNet Performance Management 8.5.x and 8.6.x
..................................................................................................................49Creating and Importing an Adapter for a BMC PATROL KM
..................................................................................................................50Updating an Adapter for a BMC PATROL KM
..................................................................................................................50Importing and Customizing Thresholds
..................................................................................................................51Managing Baselines and Key Performance Indicators
...........................................................................................................................52Monitoring your Environment
...........................................................................................................................53Administering Symantec NetBackup
..................................................................................................................53Starting Master/Media Server
..................................................................................................................54Stopping Master Media Server
..................................................................................................................54Assigning, Denying, or Resubmitting Mount Requests
..................................................................................................................55Bringing Standalone Drives Online or Offline
..................................................................................................................55Bringing Robotic Drives Online or Offline
...........................................................................................................................55Configuring the KM
..................................................................................................................56Configuring Paths
..................................................................................................................56Specifying the Node Type
..................................................................................................................57Configuring the Multi-Node Monitoring Mode
..................................................................................................................58Filtering Elements to Monitor
..................................................................................................................60Configuring Monitoring Periods
..................................................................................................................63Configuring the Elements Status
..................................................................................................................65Configuring the Node Status
..................................................................................................................66Configuring Mount Requests Date/Time Format
..................................................................................................................67Configuring the Log Filter
..................................................................................................................69Configuring the Log Scan Limit
..................................................................................................................7 0Configuring Jobs Erroneous Exit Status Filter
..................................................................................................................7 1Configuring Policy Backup Restriction
..................................................................................................................7 2Configuring Alert Acknowledgement
..................................................................................................................7 3Refreshing Parameters
..................................................................................................................7 4Reloading Commands
..................................................................................................................7 5Enabling the Debug Mode
...........................................................................................................................7 8Acknowledging Alerts
...........................................................................................................................7 9Generating Reports
...........................................................................................................................7 9Reference Guide
...........................................................................................................................80Classes and Parameters
..................................................................................................................81NBU_SERVER
..................................................................................................................87NBU_CLIENT_CONTAINER
..................................................................................................................88NBU_CLIENT
Table of Contents 6
Version 2.8.01
Symantec NetBackup KM for PATROL
..................................................................................................................89NBU_DAEMON_CONTAINER
..................................................................................................................91NBU_DAEMON
..................................................................................................................93NBU_DATABASE_CONTAINER
..................................................................................................................94NBU_DATABASE
..................................................................................................................96NBU_LOG_CONTAINER
..................................................................................................................97NBU_LOG
..................................................................................................................100NBU_POLICY_CONTAINER
..................................................................................................................102NBU_POLICY
..................................................................................................................106NBU_PCLIENT
..................................................................................................................108NBU_JOB_CONTAINER
..................................................................................................................110NBU_JOB
..................................................................................................................113NBU_MOUNT_CONTAINER
..................................................................................................................114NBU_MOUNT
..................................................................................................................116NBU_LIBRARY_CONTAINER
..................................................................................................................117NBU_LIBRARY
..................................................................................................................120NBU_LDEVICE
..................................................................................................................122NBU_DEVICE_CONTAINER
..................................................................................................................123NBU_DEVICE
..................................................................................................................125NBU_POOL_CONTAINER
..................................................................................................................126NBU_POOL
..................................................................................................................129NBU_STORAGE_CONTAINER
..................................................................................................................131NBU_STORAGE
..................................................................................................................132NBU_DPOOL
..................................................................................................................134NBU_DVOLUME
...........................................................................................................................136Additional Information
...........................................................................................................................136Troubleshooting
...........................................................................................................................139Impact on Resources
...........................................................................................................................140Customer Support
Symantec NetBackup KM for PATROL
8Release Notes for v2.8.01
Version 2.8.01
Symantec NetBackup KM for PATROL
Release Notes for v2.8.01
This section lists new features, changes, improvements and bug fixes that have been implemented sincethe release of version 2.7.00 of the product.
What's NewFully compatible with NetBackup v7, v7.1 and v7.5
Fully compatible with BMC ProactiveNet Central Monitoring Administration, a feature supported byBMC ProactiveNet Performance Management version 9.0.00.
New parameter (NBUDaemonCPUUtilization) to monitor each daemon’s CPU usage
Ability to disable custom events from the KM
Schedule start and end times available in the NBU_JOB Infobox.
Changes and ImprovementsAll collectors are now automatically refreshed as soon as the KM configuration and the initialdiscovery are complete.
In order to easily identify which step the initial discovery is processing, the setup icon now reflectsthe successive phases:
Upgrading (PATROL Classic Console only)
Loading (Commands)
Initializing (KM paths. Missing path is now specified in the System Output Window)
Discovering (Monitored application)
Cleaning (Temp files)
Validating (Application paths)
The KM performance has been improved to support large number of Symantec NetBackupcomponents.
All previous pconfig variables available under /NBU are now split to /NBU and /Runtime/NBU whileupgrading the KM.
<Component>Summary: Duplicate fields in summary text parameters are removed. Only thefirst entry is kept and all repetitions are ignored even when their values are different. The delayrequired to perform a discovery following an Agent restart has been substantially reduced.
Client and policy monitoring is now enabled by default with an instance limit set to 50.
Jobs:
The performance of the initial job collection cycle has been improved. By default, completed jobsare not discovered during initial collection.
The job duration calculation method has been improved: job duration/age and job state durationare calculated using the current time instead of job collector start time.
The event triggered by the NBUJobStatus parameter now includes the last message received. Itgenerally indicates the reason for the job failure.
Logs:The default log scan limit was increased to 500KBytes.
Debug mode:
The time during which the debug information is logged can now be set by the user.
The KM-related messages that are sent to the System Output Window (SOW) are also logged tothe NBU.log file available under <PATROL_HOME>/log.
9Release Notes for v2.8.01
Version 2.8.01
Symantec NetBackup KM for PATROL
KM can be reinitialized to capture the initial collection debug messages by using the Debug menuwhen debug is turned on.
The NBURemoveTempFiles parameter was removed.
The NetBackup Log Directory Path can now be set from the Paths configuration window.
The default number of instances of Application Classes has been removed. This information mustbe defined by the user. When set to 0, the monitoring of a specific Application Class is notperformed.
Fixed IssuesThe NBU_library_stats.sh script to support the “tail” command on Linux platforms.
Drive status alert did not report device host anymore.
Jobs:
Job detail command failed for old jobs leading to improperly explained triggered events.
The NBUJobStatus parameter now triggers an alert each time a job goes to the "Requeued"state.
No error information was available for the triggered event when a backup job failed with error"cannot access", "access denied" or "cannot open".
Backup jobs stayed indefinitely in "Requeued" state if no further retry attempts could be runbefore the schedule end time. To prevent this situation, the NBUJobState parameter nowreflects the last execution state and a warning or alarm is triggered on the NBUJobStatusparameter if such situation occurs.
Daemons:
The NBUDaemonState parameter was set to "Not Running" when the PATROL Agent could notfork processes, which resulted in invalid alarms on the NBUDaemonStatus parameter.
Due to a misinterpretation of the daemon status, the NBUDaemonState parameter was set to"Unknown" while the daemon was actually running.
NBULoginStatus in warning for errors relating to printf when the argument is too long.
Incorrect management of date/time and elapsed time displayed by the KM for some timezones.
The KM can now create and monitor mount requests when no tape labels are specified.
Debug Mode ZIP output: On Windows 2008, the KM failed to create a ZIP archive with thecontent of the debug mode.
Monitoring Mode: While configuring multi-node mode, the KM can prompt for PATROL accountcredentials several times for the same node.
The KM failed to determine the NBULibraryMedia* parameters when the scratch pool was notfound.
Library-related commands have been modified to resolve errors that triggered a warning on the NBULoginStatus parameter.
A problem occurring when the KM triggers an alert for a parameter of the NBP_POOL applicationclass would lead the PATROL Agent to crash without displaying any error message.
The parameter NBUDatabaseBackupElapsed and the infobox information "Last Backup", "Last BackupMode" & "Last Backup Job ID" were moved from the NBU_DATABASE class to theNBU_DATABASE_CONTAINER class.
When configured through the BPPM Console Administration with custom configurations of certainclasses (i.e. NBU_CLIENT, NBU_POLICY, NBU_JOB, etc.), the KM would not properly switch to aforced classic mode.
With some Windows platforms the Debug KM Command was prompting for an OS login to turn thedebug on.
Pool media stats parameters for 'Frozen', 'Active', 'Full', 'Suspended' and 'Unknown' media werenot correctly counted.
10Overview
Version 2.8.01
Symantec NetBackup KM for PATROL
Overview
Symantec NetBackup KM for PATROL monitors your Symantec NetBackup application within a centralizedmanagement console to ensure its runs efficiently 24 hours a day.
The KM more especially monitors the:
Server availability: status, memory and CPU time consumption, etc.
Jobs: status, duration, data throughput and time elapsed since last backup, comparative statistics,etc.
Log Files: size, content, growth rate, file system space utilization, etc.
Robotic libraries and drives: library and drive status, throughput, loaded media identification,etc.
Disk storage and volume pools: space utilization, status, count, etc.
Catalog database: space utilization, file system monitoring, time since the last database backup,etc.
Client: connectivity, metrics from the last successful backup, etc.
All the information collected is grouped into application classes and displayed in the PATROL Console.Alarms and warnings inform you when a suspicious behavior is detected; thus allowing you to quicklyand clearly identify peaks, troughs and trends in the performance of your backup resources.
Refer to the Reference Guide for more information about the application classes.
Preparing for Installation
This chapter provides information about the tasks that must be performed before you start installingSymantec NetBackup KM for PATROL. Make sure to carefully read the following sections requirements:
Review the System, Software, Security and Disk Space Requirements
Get the BMC Software Installation Utility
Download the Installation Packages
Extract the Setup Files
RequirementsBefore installing the NetBackup KM, verify the:
System requirements
Software requirements
Security requirements
Disk space requirements.
11Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
System Requirements
Symantec NetBackup KM for PATROL supports the following operating systems:
Operating System Version
Oracle SolarisTM 8, 9, 10
HP-UX 11.00, 11.11, 11iv2, 11iv
IBM® AIXTM 5.1, 5.2, 5.3, 6.1
Red Hat® Linux® 7.2
Microsoft® Windows® 2003, 2008, 2008 R2
If the operating system is upgraded (or downgraded) at a later date, you will need to reloadcommands for the NetBackup KM. Refer to Upgrading the Platform.
12Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Software Requirements
Symantec NetBackup KM for PATROL supports:
Software Version
Symantec NetBackup™ 4.5, 5.0, 5.1, 6.0, 6.5, 7, 7.1, 7.5
BMC Software PATROL Agent 3.4.20, 3.5.x, 3.6.x, 3.7.x, 3.8.x, 3.9.x, 9.x
BMC Software PATROL Console 3.4.x, 3.5.x, 7.x
BMC Portal 2.3.x, 2.4.x, 2.5.x, 2.6.x, 2.7.x, 2.8.x
BMC ProactiveNet Performance Manager 8.x, 8.5.x, 8.6.x, 9.x
If the operating system is upgraded (or downgraded) at a later date, you will need to reloadcommands for the NetBackup KM. Refer to Upgrading the Platform.
If you're running the NetBackup KM with sudo user account, or on AIX, LINUX, or Microsoft Windows x64managed nodes, please verify these additional software requirements:
Purpose Software Version
When running NBU KM with sudo user account onSolaris, HP-UX, AIX or Linux managed nodes
Sudo (superuser do) 1.6.7 or later
When running NBU KM on AIX managed nodes Default ncargs value for processing bpdbjobsoutput may not be sufficient.
Check this attribute using:lsattr -EH -l sys0 | grep ncargs
If the value is below 16, increase it using:chdev -l sys0 -a ncargs=16
Any
When running NBU KM on Linux managed nodes
Korn shell binary (/bin/ksh) Any
When running NBU KM on Microsoft Windows x64 managed nodes
Reg.exe patch KB948698(http://support.microsoft.com/kb/948698)
Any
The Microsoft Windows x64 Reg.exe patch, KB948698 is required to allow access to 64-bit registrykeys from PATROL Agent. Access the above patch site from the managed node to obtain the correctpatch for that platform.
13Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Changes Required
No changes need to be done to Symantec NetBackup to use Symantec NetBackup KM for PATROL.
Some changes must however be made to BMC PATROL to improve the performance of SymantecNetBackup KM for PATROL. The PATROL Agent tuning variable “/AgentSetup/AgentTuning/pslInstructionMax” should be disabled by setting it to 0 (zero) or increased to at least 5,000,000.
This applies for all Symantec NetBackup master servers and media servers where the KM is installed.This adjustment will allow the data collectors to execute without incurring an internal scheduling delay.
This PATROL Agent tuning variable can be updated using wpconfig (on Microsoft Windows), xpconfig(on Unix) or PATROL Configuration Manager (PCM). Alternatively, you can use one of the followingsingle line PSL command through the PATROL Console OS> prompt to update this tuning variable.
To disable the tuning variable:
%PSL pconfig("REPLACE",
"/AgentSetup/AgentTuning/pslInstructionMax",0);
To set to at least 5,000,000:
%PSL v="/AgentSetup/AgentTuning/pslInstructionMax";
if(get(v)<5000000){pconfig("REPLACE",v,5000000);}
In large Symantec NetBackup systems, the value of 5,000,000 for the tuning variable “pslInstructionMax” may still beinsufficient. In such situations, error messages will appear on the PATROL Console System Output W indow (SOW)reporting that some NetBackup KM data collectors are in an infinite loop. In this case you can set the tuning variableto zero to disable this functionality .
The KM stores all configuration information in the PATROL Agent configuration database (pconfig),under the /NBU and /Runtime/NBU paths. PATROL Agent user (default: patrol) should be able to readand write to these pconfig variables at anytime. If Access Control List (ACL) is used to control whichusers are authorized to connect to a PATROL Agent, please make sure that the mode for PATROL Agentuser includes “C” in the PATROL Agent variable “/AgentSetup/accessControlList”. Please refer the PATROL Agent Reference Manual for more details.
14Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Security RequirementsA user account with administrative privileges must be configured in BMC PATROL to read and executeSymantec NetBackup application programs and access file systems. Depending on the operating systemsused, several options will be available.
The following user accounts can be used:
On Unix platforms:
a root user
a non-root user, such as patrol, that has sudo privileges on Symantec NetBackup to executeapplication programs and access file systems
a non-root account, such as patrol, configured in Symantec NetBackup application to administerthe Symantec NetBackup application.
On Windows platforms:
an administrator user
a non-administrator account, such as patrol, configured in Symantec NetBackup application toadminister the Symantec NetBackup application. Refer to the Symantec NetBackup SystemAdministrator’s Guide for details on how to set up this type of account.
Users added to NBU_Admin user group in VxSS. Please make sure the credentials of this user donot expire using the utility nbac_cron.
The user login details are configured in the KM. The password is stored in the PATROL Agent in a DESencrypted format.
The encrypted password can be viewed by any user who has access to the PATROL Agentconfiguration variables (pconfig). This user could then execute PSL statements using the encryptedpassword through the PATROL Console. This can be prevented by setting up an appropriate AccessControl List (ACL) for users. Please refer to the PATROL Agent Reference Manual for details on howto set up an ACL.
15Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Access Permissions
The NetBackup KM user needs “read & execute” permission to executable and library files under thepaths listed below. The Symantec NetBackup installation path INSTALL_PATH, referenced in the tablesbelow is normally /usr/openv or /opt/VRTSnetbp (on Unix) or C:\Program Files\Veritas (onMicrosoft Windows).
Executable and Library Files accessed by the NetBackup KM User
Unix Microsoft Windows
INSTALL_PATH/netbackup INSTALL_PATH\NetBackup
INSTALL_PATH/netbackup/bin INSTALL_PATH\NetBackup\bin
INSTALL_PATH/netbackup/bin/admincmd INSTALL_PATH\NetBackup\bin\admincmd
INSTALL_PATH/netbackup/bin/goodies INSTALL_PATH\NetBackup\bin\goodies
INSTALL_PATH/volmgr/bin INSTALL_PATH\Volmgr\bin
INSTALL_PATH/volmgr/bin/goodies INSTALL_PATH\Volmgr\bin\goodie
INSTALL_PATH/lib C:\Program Files\Common Files\VERITAS Shared
/usr/openwin/lib INSTALL_PATH\NetBackup\lib
If the KM is enabled to failover in a clustered environment, the login user needs execute permissions tothe following cluster commands:
/opt/VRTSvcs/bin/hagrp (in Veritas Cluster Server)
vxdctl (in Veritas Cluster File System)
/usr/cluster/bin/clrg (in Oracle Solaris Cluster)
The NetBackup KM includes some scripts which should be executable by the PATROL Agent user and theNetBackup KM user. These scripts are stored under KM_HOME path, normally PATROL_HOME/lib/NBU.
16Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
To list all OS commands used by the NetBackup KM, execute the following PSL code from the PATROLConsole, using PSL Task menu, after installing and loading the KM.
i=0; sudoers="";
foreach var (grep("^/Runtime/NBU/CommandControls/",pconfig("LIST")))
{
ctl=get(var);
opt=ntharg(grep("Option",ctl),"2-"," =");
nsa=ntharg(grep("NoSudoAttempt",ctl),"2-"," =");
sua=ntharg(grep("SingleUserAttempt",ctl),"2-"," =");
typ=ntharg(grep("CommandType",ctl),"2-"," =");
cmd=nthargf(grep("CommandText",ctl),"2-","=","=");
if((typ == "")||(typ == "OS"))
{
met="";
if(opt == "NoLogin") { met = "(run as patrol user)"; }
elsif(nsa == "YES") { met = "(run as configured user without sudo)"; }
elsif(sua == "YES") { met = "(run as supplied user - used in menu)"; }
else
{
scmd=cmd;
s=index(scmd,"%sudo");
if(s) { scmd=replace(substr(scmd,s,length(scmd)),"%sudo",""); }
sudoers=union(sudoers,ntharg(ntharg(scmd,1,"|"),"1-"," "," "));
}
printf("(%2d) %-30s %-40s: %s\n",i++,ntharg(var,"5","/"),met,cmd);
}
}
printf("\n\nCommands used with sudo:\n%s",sort(sudoers));
Paths and Files Accessed by PATROL Agent User
Unix Microsoft Windows
INSTALL_PATH/netbackup/db INSTALL_PATH\NetBackup\db
INSTALL_PATH/volmgr/database INSTALL_PATH\Volmgr\database
INSTALL_PATH/var INSTALL_PATH\NetBackup\var
INSTALL_PATH/netbackup/db/error/ daily_messages.log
INSTALL_PATH\NetBackup\db\error\log_date
/var/adm/messages (on Solaris)
/var/adm/syslog/syslog.log (on HP-UX)
/var/log/messages (on Linux)
If a monitored log file cannot be read by the PATROL Agent user, it will be copied to KM_TEMP pathusing the configured login account, and processed by the PATROL Agent user. On completion thecopied log file will be removed. This may increase the file system usage under KM_TEMP temporarilyduring this activity.
17Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
On Windows platforms the Symantec NetBackup installation is identified by checking the MicrosoftWindows Registry: HKEY_LOCAL_MACHINE\SOFTWARE\Veritas\NetBackup\
The configured login user should have sufficient privileges to run regedit command on the managednode.
Sudo User for Operating System Access
If a non-root user with sudo privileges is preferred as the KM user, configure the account as a sudoerthrough the visudo utility using code appropriate for your platform as detailed below. This user shouldbe able to execute NetBackup commands and OS commands listed in above.
The code below also applies to all non-root users who may execute NetBackup KM administration andreport menu commands using their sudo privileges. The KM accepts any non-root user with thefollowing sudo configuration in the sudoers file. Please replace user1, user2, user3 with appropriate KMuser names. The Symantec NetBackup installation path INSTALL_PATH, referenced below is normally /usr/openv or /opt/VRTSnetbp and PATROL_HOME is the path where the PATROL Agent is installed(including the target, like /opt/bmc/Patrol3/Solaris29-sun4/).
This non-root sudo user configured in the KM will be able to execute Symantec NetBackupcommands. To prevent unauthorized access, ensure this user is only used within the KM and notmade public for general use.
Entering the non-root sudo user with ‘Use Sudo’ option selected in to the login configuration dialog,before updating the sudoers file, will generate sudo errors. Also if the sudo user is configureddifferently, the KM may run sudo commands using incorrect sudo settings, which may expose thesudo user password.
On SolarisUser_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,\
env_keep+="LD_LIBRARY_PATH INSTALL_PATH KM_HOME \
KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH and PATROL_HOME with therelevant paths.
18Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
On HP-UXUser_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,\
env_keep+="SHLIB_PATH INSTALL_PATH KM_HOME \
KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH and PATROL_HOME with therelevant paths.
On AIX & LinuxUser_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,\
env_keep+="LIBPATH INSTALL_PATH KM_HOME \
KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH and PATROL_HOME with therelevant paths.
19Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Disk Space Requirements
Symantec NetBackup KM for PATROL requires approximately:
• 2.5 MBytes of available disk space on each monitored PATROL Agent system
• 3.5 MBytes of available disk space on each PATROL Console system
• 600 KBytes of available disk space on each PATROL Central Console Server system
• 1.4 MBytes of available disk space on each PATROL Central Web Server system
It is installed under the PATROL installation path.
When monitoring a standard installation of Symantec NetBackup, the PATROL Agent will generateapproximately 500 KBytes of history data per day. An enterprise installation of Symantec NetBackup on amaster server with multiple media servers, clients, robotic libraries, and standalone drives will generatemore history data (as per other KMs used by the PATROL Agent). These history data files are recycledby PATROL depending on the PATROL Agent history retention period.
During execution, the KM creates and maintains temporary files under KM_HOME, KM_TEMP andKM_DEBUG paths. By default they are all under PATROL_HOME/lib/NBU, where PATROL_HOME pathis normally opt/bmc/Patrol3/ (on Unix) or C:\Program Files (x86)\BMC Software\Patrol3\ (onMicrosoft Windows).
If the location of the KM_TEMP or KM_DEBUG is not suitable, it can be changed using theConfiguration>Paths menu from the main instance. These folder should have read, write andexecute permissions for both the PATROL Agent user and the KM login user.
20Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
Getting the BMC Software Installation UtilityIn order to install Symantec NetBackup KM for PATROL, you need the latest version of the BMC SoftwareInstallation Utility. You can download the latest Installation Utility from the BMC Software EPD (electronicproduct download) from: http://webapps.bmc.com/signon/content/logon.jsp on the BMC SoftwareWebsite, or from the Symantec NetBackup KM for PATROL page on the Sentry Software Website
Choose the appropriate package depending on the platform you plan to install Symantec NetBackup KMfor PATROL on:
For UNIX/Linux systems: ins_ALL_<version>.tar
For Windows systems: ins_WINDOWS_<version>.exe
The packages are valid for all the PATROL components: Agent, Console, Console Server, etc.
Place the Installation Utility package in the same folder as the Symantec NetBackup KM for PATROLpackages.
21Preparing for Installation
Version 2.8.01
Symantec NetBackup KM for PATROL
PackagesThe Symantec NetBackup KM for PATROL packages are available on the Sentry Software Web site.
There are two packages, each of which can be used to install the KM on every PATROL component(Agent, Console, etc.) according to the platform you are using.
Downloading from Sentry Software Web site
For Windows systems: nbu_WINDOWS_2800.exe
For UNIX and Linux systems: nbu_UNIX_2800.tar
The Symantec NetBackup KM for PATROL packages are designed for use with the BMC Software
Installation Utility (formerly known as Thorium). They need to be merged with the latest availableversion of the BMC Software Installation Utility. Please see instructions.
Extracting the Setup FilesLike most Knowledge Modules for PATROL, you need to install Symantec NetBackup KM for PATROL onthe following components of your PATROL architecture:
Every managed system with a PATROL Agent
Every PATROL Console (Classic) that will show Symantec NetBackup performance-relatedinformation and alerts
The Console Server
PATROL Central – Web Edition
Installing the KM
Introduction
This section describes the installation procedure for Symantec NetBackup KM for PATROL on anyPATROL component (Agents, Consoles, Console Server, etc.). As the setup is based on the BMCSoftware Installation Utility, this procedure applies to all operating systems supported by SymantecNetBackup KM for PATROL.
22Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Installing Symantec NetBackup KM for PATROLInstalling Symantec NetBackup KM for PATROL is an automated process managed by a wizard. Thewizard goes through the necessary steps to install Symantec NetBackup KM for PATROL and all filesassociated with it. You are simply prompt for the product's folder location and the product/componentsto install.
Browse to the bmc_products folder where the files have been extracted (both Symantec NetBackup KMfor PATROL and the Common Installer).
On Windows: Launch the setup.exe program
On UNIX: Launch the setup.sh script
To install Symantec NetBackup KM for PATROL1. Allow the perl.exe program to listen on this port: Click Allow access.
Installation Wizard - Step 1: Windows Security A lert
23Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
2. The welcome screen of the installer appears. Click Next to continue.
Installation Wizard - Step 2: Welcom e
24Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
3. Read the license agreement, click the Accept option and then click Next to continue.
Installation Wizard - Step 3: Rev iewing License A greem ent
25Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
4. Select Install the products on this computer now and click Next to continue.
Installation Wizard - Step 4: Selecting Installation Options
26Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
5. Specify the BMC Software products folder. See the BMC Software documentation for moreinformation about the BMC Software products folder. Click Next to continue.
Installation Wizard - Step 5: Selecting the Installation Directory
27Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
6. Select Default. Installing Symantec NetBackup KM for PATROL does not require any customization.Click Next to continue.
Installation Wizard - Step 6: Selecting an Installation Ty pe
7. Select one or several of the following options:
Managed System to install Symantec NetBackup KM for PATROL on a PATROL Agent.
Console Systems role to install Symantec NetBackup KM for PATROL on a PATROL ClassicConsole.
Common services to install Symantec NetBackup KM for PATROL on the Console Server or onPATROL Central – Web Edition.
Click Next to continue.
28Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Installation Wizard - Step 7: Selecting Roles
Select as many options as required.
29Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
8. Check the Symantec NetBackup KM for PATROL box to install the KM (it should be selected bydefault). Click Next to continue.
Installation Wizard - Step 8: Selecting Products and Com ponents
30Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
9. Review the installation parameters and click Start Install to launch the installation procedure.
Installation Wizard - Step 9: Rev iewing Installation Options
31Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
10. The setup program displays the actions performed and indicates the percentage of completion.Once the installation complete, click Next to view the installation results.
Installation Wizard - Step 10: Installation Status
32Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
11. The wizard displays the installation results.Click View Log to display a detailed log of the installation procedure. Click Next and then Finish toexit the setup program.
Installation Wizard - Step 11: Installation Results
12. Click the Finish button to complete and close the installation wizard.
33Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Installation Wizard - Step 12: Com pleting and closing the Installation Wizard
A Help button is available at each step of the procedure. Click to display the installation online help. The Exit buttonallows you to stop the installation procedure.
34Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Uninstalling Symantec NetBackup KM forPATROLUninstalling Symantec NetBackup KM for PATROL is an automated process managed by a wizard. Thewizard goes through the necessary steps to remove Symantec NetBackup KM for PATROL and all filesassociated with it. You are simply prompt for the product's folder location and the product/componentsto uninstall.
To uninstall Symantec NetBackup KM for PATROL1. Locate the Uninstall folder under the BMC products directory (typically under C:\Program Files\BMC
Software, or /opt/bmc):
On Windows systems, launch uninstall.exe
On UNIX, launch uninstall.sh
Un-install Wizard — Welcom e Step
35Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
2. Specify the BMC Software products folder. See the BMC Software documentation for moreinformation about the BMC Software products folder.
Un-install Wizard — Specify ing folder
36Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
3. To uninstall the KM, select Symantec NetBackup KM for PATROL.
Un-install Wizard — Selecting Products and Com ponents Directory
37Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
4. Click Start Uninstall.
Un-install Wizard — Rev iewing Selected Products & com ponents and start uninstalling
38Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
5. A page displays the list of products/components processed and the percentage of completion. ClickNext to continue.
Un-install Wizard — Status
39Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
6. A page displaying SUCCESS indicates that Symantec NetBackup KM for PATROL is nowuninstalled.
Un-install Wizard — Uninstall Results
Upgrading the PlatformIf you upgrade (or downgrade) your operating system or Symantec NetBackup, the commands for theNetBackup KM need to be reloaded.
Use the menu Reload Commands from the Symantec NetBackup instance.
Loading/Unloading the KMOnce installed the KM will have to be preloaded on one of the following PATROL consoles:
PATROL Console
PATROL Central
The PATROL Agent can also be configured to automatically preload the KM.
40Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Loading the KM
Before loading the NetBackup KM:
1. Make sure you properly installed the KM on PATROL Console and PATROL Agent systems
2. Start the PATROL Console and update the connection to all PATROL Agent systems where theNetBackup KM is installed.
3. Check the value of the PATROL Agent tuning variable, /AgentSetup/AgentTuning/pslInstructionMax, and if necessary, increase it.
Loading the KM on PATROL Console
To load the KM on a PATROL Console:
1. From the PATROL Console menu bar, choose File > Load KM...
2. Select the NBU_LOAD.kml file
3. Click Open or OK.
The NetBackup KM will be loaded to the PATROL Console, and all connected PATROL Agents will startdiscovering the Symantec NetBackup environment. If the automatic discovery successfully finds theSymantec NetBackup master/media server installation, the NBU_SETUP instance will be instantiated.
The automatic discovery may take up to 5 minutes to instantiate the NBU_SETUP instance. Look for any errormessages on the PATROL Console System Output W indow (SOW) during the initial discovery .
If you want to save the new list of loaded files as the PATROL Console user preference:
1. From the PATROL Console menu bar, choose File > Save Configuration
2. Load the NBU_LOAD.kml file on each PATROL Console.
3. Configure the KM.
Loading the KM on PATROL Central
To load the KM on PATROL Central:
1. In the Console, right-click the Managed System and select Load Knowledge Modules... The LoadKnowledge Modules wizard is displayed
2. Click Next
3. Select the managed systems where the NetBackup KM is to be loaded, and click Next >. Thewizard will display a list of all available .kml files for the managed systems you selected.
4. Select the NBU_LOAD.kml file for each managed system, click Next > and Finish.
The NetBackup KM will be loaded to the PATROL Central Console Server, and all connected selectedmanaged systems will start discovering the Symantec NetBackup environment. If the automatic
41Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
discovery successfully finds the Symantec NetBackup master/media server installation, the NBU_SETUPinstance will be instantiated.
This automatic discovery may take up to 5 minutes to instantiate the NBU_SETUP instance. Look for any errormessages on the PATROL Central System Output W indow (SOW) during the initial discovery .
5. Load the NBU_LOAD.kml file on each PATROL Central Management Profile where NetBackup KM isto be loaded.
6. Configure the KM.
Configuring the PATROL Agent to Preload the KM
If you want Symantec NetBackup KM for PATROL to operate all the time, without a PATROL Consoleconnection, you'll have to add it to the PATROL Agent configuration variable /AgentSetup/preloadedKMs.
To configure the PATROL Agent to preload the KM:
1. In the Console, right-click the KM main icon > Configuration > Preloading.
2. Click Add to add the KM files to the list of preloaded KMs.
The same menu is used to remove the KM files from the preloaded KMs list.
42Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Unloading the KM
This section describes the procedures for unloading (not uninstalling) the NetBackup KM from thePATROL Agent, PATROL Console or PATROL Central Console. Read this section if you no longer want touse some parts of the KM; if you want to completely uninstall the KM, refer to the uninstall procedure.
When the KM is unloaded:
from a PATROL Agent: PATROL stops monitoring the Symantec NetBackup application on thatsystem when there is no connection to a PATROL Console with NetBackup KM loaded.
from PATROL Console: the PATROL Console stops displaying and monitoring the SymantecNetBackup application on any PATROL Console connected system.
See AlsoUnloading from the PATROL Agent Unloading from the PATROL Console Unloading the KM from the PATROL Central Console
Unloading the KM from the PATROL Agent
To unload the KM from the PATROL Agent:
1. In the Console, right-click the Symantec NetBackup icon and select KM Commands >Configuration > Preloading
2. Click Remove
3. Restart the PATROL Agent.
4. Repeat these steps on every PATROL Agent system (managed node) where the NetBackup KM is tobe unloaded.
You can also use the utility wpconfig (on Microsoft W indows) or xpconfig to unload the KM. You will then have toremove NBU_LOAD.kml from the PATROL Agent configuration variable /AgentSetup/preloadedKMs.
The KM cannot be partially unloaded from the PATROL Agent using the above steps. If you need to unload some partsof the KM from the PATROL Agent, refer to the PATROL Agent Reference Manual.
43Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Unloading the KM from the PATROL Console
Application classes are unloaded individually. This allows for a partial unloading of the KM to enable it torun as a reduced installation.
To unload the NetBackup KM completely or partially:
1. Remove the unwanted application classes that starts with NBU_ in the list of loaded applicationclasses as described below:
With the PATROL Console for Unix:
From the PATROL Console main window choose Attributes> Application Classes...
Select a NetBackup KM application class to be removed and choose Edit>Delete.
Repeat for all classes to be removed.
With the PATROL Console for MS Windows:
From the PATROL Console tree view choose the KM tab and expand the folder ApplicationClasses.
Right-click on a NetBackup KM application class to be removed and choose Delete.
Repeat for all classes to be removed.
2. Select File>Save Configuration to save the modified list of loaded application classes as thePATROL Console user preference.
3. Repeat these steps on every PATROL Console system where the NetBackup KM is to be unloaded.
Unloading the KM from the PATROL Central Console
A KM can be unloaded from particular managed systems or for all systems across the monitoredenvironment. Application classes may be unloaded individually, or by selecting all classes at once. Thisallows for a partial unloading of the KM to enable it to run as a reduced installation on some or all of themanaged systems.
To completely or partially unload the NetBackup KM from some or all of the managed systems:
1. Right-click the PATROL Main Map, and choose Unload Knowledge Modules...
2. Select the managed systems where the NetBackup KM is to be unloaded, and click Next>.
3. Select the application classes to be removed that starts with NBU_ for the appropriate managedsystems, click Next> and Finish.
4. Repeat the above steps for each PATROL Central Management Profile where the NetBackup KM is tobe unloaded.
44Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Performing Post-Installation OperationsIt is recommended to perform post installation checks once the KM is installed and loaded on thePATROL Console to ensure it properly operates. Post-installation operations include:
Configuring the KM user account
Verifying:
the application discovery
the instance limits
the initial setup
Restarting the PATROL Agent and PATROL Console.
Configuring the KM User AccountA user account with administrative privileges must be configured in BMC PATROL to read and executeSymantec NetBackup application programs and file systems. Depending on the operating systems used,several options will be available.
On Unix platforms, you can use the following user accounts:
a root user
a non-root user, such as patrol, that has sudo privileges on Symantec NetBackup to executeapplication programs and access file systems
a non-root account, such as patrol, configured in Symantec NetBackup application to administer theSymantec NetBackup application.
45Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
On Windows platforms, you can use the following user accounts:
an administrator user
a non-administrator account, such as patrol, configured in Symantec NetBackup application toadminister the Symantec NetBackup application.
To configure the KM User Account:1. In the Console, right-click the Symantec NetBackup instance > Configuration > Login. The
Login Configuration dialog box is displayed:
Login Configuration dialog
2. To use:
the default PATROL Agent Account, check the Use Agent Default Account box. The logindetails entered in the Username and Password fields will then be ignored.
a different user account, enter the login details in the Username and Password fields
3. If a sudo user account is used:
check the Use Sudo box
click SUDO Binary File to verify the sudo binary file path
4. Click OK.
If the credentials are not valid, the NBULoginStatus parameter will appear in “suspicious state” afterthe next data collection.
46Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Verifying Application Discovery
To verify the application discovery:
1. Check that the NBU_SETUP instance is actually named Symantec NetBackup. If not, force a fulldiscovery by right-clicking the NBU_SETUP instance > KM Commands > Force Discovery
2. Check that the application class instances are actually instantiated. The initial data collection maytake some time depending on the complexity of your environment (up to one hour). If needed,force a data collection by right-clicking the Symantec NetBackup instance > KM Commands >Refresh Parameters.
If Symantec NetBackup master/media server is configured in a clustered environment, you'll have to enable Multi-node Mode monitoring.
Checking the Instance LimitsSymantec NetBackup KM for PATROL automatically sets the number of instances that will be displayed inthe Console for each monitored elements. This configuration, set to offer maximum performance, canhowever be modified to better suit your environment.
Because increasing the number of instances may impact the performance of the KM, it isrecommended to only monitor critical elements in large environments.
47Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
To modify the default configuration1. In the Console, right-click the KM main icon > Configuration> Instance Limits
Configuring the Default Instance Lim its
2. Enter the number of instances to be displayed in the console for each monitored element
3. To disable the monitoring of a specific application class, enter 0 in the relevant field
4. Click OK.
48Installing the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Checking the Initial Setup
To check the initial setup of the KM:
1. Check whether the discovered files and directory paths are correct, using the menu Configuration>Paths from the Symantec NetBackup instance.
2. Check whether the discovered Node Type is correct using the menu Configuration> Node Typefrom the Symantec NetBackup instance.
3. Check the InfoBoxes and Parameters of all the NetBackup KM instances and verify that they areproperly set.
4. Under each container instance, open all detail parameters (text parameters with names in theformat NBU<Object>Details), and check for error messages.
5. Check the new value of NBULoginStatus set after completion of all data collection. If either is notin OK state, open the annotation point to determine the cause of the error.
6. After the KM has been running for at least an hour:
Right-click the KM main icon > KM commands > KM Status from the Symantec NetBackupinstance. A report is displayed, detailing information on the managed system. Check through thereport for any warnings or alarms. If any errors are found during any of the above steps(including any incorrect data in Infoboxes or any warnings or alarms in the KM Status report),determine the cause(s) and take steps to resolve these errors. You may need to refer to the UserGuide, or contact Technical Support, attaching the KM Status report.
If needed, click Save As Task to open the report in a task window. You could later save it as atext file or print it.
7. The KM installed on the master server may monitor the same storage, disk pools, disk volumes,robotic libraries & drives which are already monitored through the media servers. This may beunnecessary and can trigger duplicate alerts. You can disable these components on either masterserver or media server by setting their instance limit to 0 (zero), using the menu Configuration>Instance Limits.
Restarting PATROL Agent and PATROL ConsoleRestarting the PATROL Agent and PATROL Console is optional but often a good practice to confirm thatthe NetBackup KM operates correctly after restarting the PATROL Agent and/or PATROL Console.
In addition, the PATROL Agent restart will force all KM discoveries and data collections to startimmediately.
Integrating the KM
Introduction
This section provides detailed information about the integration of NetBackup KM into the BMCFramework.
49Integrating the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
Integrating with BMC Portal1. Log on to BMC Portal with appropriate credentials to add infrastructure elements.
2. Click on Configure tab.
3. Under Tasks, select Elements to open the Elements page.
4. Click Add.
5. Select Infrastructure Element, and click Next.
6. Select appropriate RSM, and click Next.
7. Enter the label for the element, select PATROL Integration, and click Next.
8. Select/create a group name, and click Next.
9. Select appropriate method to discover the PATROL Agent hosts, and click Next.
10. Fill the required details for discovering the PATROL Agents, and click Commit.
Integrating with BMC ProactiveNet PerformanceManagement 8.5.x and 8.6.x
OverviewTo integrate a BMC PATROL KM into BMC ProactiveNet Performance Management 8.5.x or 8.6.x, youneed to create a specific adapter. An adapter for BMC PATROL facilitates pulling of performance datafrom existing BMC PATROL solutions into BMC ProactiveNet. Using an Adapter, you can import BMCPATROL application classes (provided in a Knowledge Module –KM) into BMC ProactiveNet. The Adapterperiodically synchronizes the performance data collected by these application classes into BMCProactiveNet.
Creating and Importing an Adapter for a BMC PATROL KM
Creating an Adapter for a BMC PATROL KM1. Open the BMC ProactiveNet Administration Console. The BMC ProactiveNet Administration Console
is displayed as shown in the following figure:
2. Right-click the Adapters folder and select Import Monitor Type and Add Adapter > BMCPATROL.
3. In the Configuration tab, enter the required information:
In the Instance Name field, enter a name for this instance of the Adapter that will perform theintegration of the ‘targeted KM’ into BMC ProactiveNet.
Select the Agent where this instance of the Adapter will be executed
Enter the Integration Service Agent hostname or IP address
Enter the Integration Service Agent Port. The default port is 3182.
Enter the required credential to connect to the Integration Service Agent
50Integrating the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
4. Click Next to continue
5. Click Next to let the system load the BMC PATROL application classes.
6. Select the application classes to import
Unselecting will delete the application classes that have already been imported during a previousoperation. Application classes ready to be deleted are marked with a red x.
7. Click Next to start the import process. The system displays a summary of the application classimport, click Next to continue.
8. Select the application classes you wish to auto-synchronize with the Integration Service Agent.
9. Click Next to continue
10. Set the Filter details if need.
11. Click Next to continue.
12. Set the Auto-sync poll scheduling, if needed.
13. Click Next to continue. The system displays a summary of your settings, click Finish to confirm. TheAdapter has been added to the Adapters folder of the Administration Console.
14. To see the class instances that have been imported by the Adapter, expand the Adapters folder,right-click the Adapter and select Details.
We strongly recommend that you create a specific adapter for each KM you need to integrate intoBMC ProactiveNet to enable the update of a single KM independently.
Updating an Adapter for a BMC PATROL KM
Updating an Adapter1. Delete the Adapter instance
2. Go through the Add an Adapter wizard to actually delete the monitor types that had been createdbased on the previous version of the KM
3. Close
4. Resume the entire Creating an Adapter for a BMC PATROL KM procedure
For complete and detailed information on these procedures, please refer to the BMC ProactiveNet documentationavailable from BMC Web site.
Importing and Customizing Thresholds1. Launch the BMC ProactiveNet PW Commands. On Windows 2008, you need to run the PW
Commands as Administrator.
2. Execute the following command line:pw adapter -type patrol -get_thresholds <file name> -pproxy_host <hostname|ipaddress>
-pproxy_port <port_number>] [-pproxy_user <username>] [-pproxy_passwd <password>] -i -v
where
-get_thresholds <file name> = File name with absolute path at which thresholds
will be imported
-pproxy_host <hostname|ipaddress> = Host name or IP Address of Patrol Proxy Server
-pproxy_port <port_number> = Port at which Patrol Proxy Agent communicates with Patrol
Proxy Server
-pproxy_user <username> = User name of Patrol Proxy user
-pproxy_passwd <password> = Password to authenticate Patrol Proxy user
51Integrating the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
-i = import Instance level thresholds
-v = run in "verbose" mode, producing extra lines of output during extraction and
conversion processes
The command has produced a text file with all the parameter threshold settings.
3. Open the file in a text editor. Check that the global thresholds have been properly interpreted.
4. Then go to the # INSTANCE LEVEL THRESHOLDS section of the file.
5. Uncomment all instance level thresholds for the _PATROL__NBU_ prefixed instances.
Search the file for the 'NOT_IMPLEMENTED' occurrences to detect thresholds that were not properlyconverted by the PATROL Adapter.
6. Save the file.
7. Execute the following command:pw threshold loadpatrolthreshold [<thresholdfilename> [-v]]
where:
<thresholdfilename> is a thresholds file name. If no file path is specified
then the default '<Installation Directory>/pw/tmp/' is used
-v enables the Verbose mode
Class-level thresholds can be displayed using the Absolute Global Thresholds panel in the BMCProactiveNet Operator Console, while instance-level thresholds are displayed in the Absolute InstanceThresholds panel.
Managing Baselines and Key Performance IndicatorsIn order to facilitate the detection of abnormalities on your monitored environment, BMC ProactiveNetcalculates baselines per parameter (metrics or attributes) based on values collected over a specifiedperiod of time to determine a normal operating range. When the collected values for these parametersare out of range, an alert is triggered.
Some parameters are identified by default as Key Performance Indicators and therefore automaticallyincluded in the base lining calculation.
Managing baselines
The baseline is the expected normal operating range for a metric or attribute of a monitor.
The baseline is calculated by collecting the values for a monitor’s attributes and metrics over a specifiedtime period and establishing a low baseline value (consisting of the 10th percentile of all the values for agiven time period) and a high baseline value (consisting of the 90th percentile of all the values for agiven time period), taking a weighted average of these values over time. A higher weight is given to thelatest data being factored into the baseline average. The accuracy of the baseline improves over time.
Requirements for baseline generation
For baselines to be generated for an attribute, that abnormality threshold means that the threshold
52Integrating the KM
Version 2.8.01
Symantec NetBackup KM for PATROL
exists and is not suppressed. Additionally, if the Key Performance Indicator (KPI) mode is active, only those attributes that have anactive abnormality threshold and are also KPI attributes will have baselines generated for them.
Absolute thresholds (with "outside baseline") or signature thresholds do not satisfy these requirements.
Managing Key Performance Indicators
The KPI attribute of a parameter can be activated or deactivated manually through the BMC ProactiveNetAdministration Console. In this KM, some parameters or attributes have been designated as importantindicators of performance (KPIs). We do not recommend that these default settings are modified.
However, advanced users may activate or deactivate KPIs from the BMC ProactiveNet AdministrationConsole.
To add or remove Key Performance Indicator (KPI) attributes for amonitor type
1. In the Administration Console, from the menu bar, choose Tools > KPI Administration. TheKPI Administration dialog box is displayed.
2. From the Monitor Type list, choose the monitor type for which you want to add or remove KPIattributes. A list of attributes for the selected monitor type is displayed.
3. In the KPI column for the attributes that you want to add or remove as Key Performance Indicators:
select the KPI check box to add the corresponding attribute as a KPI
deselect the KPI check box to remove the corresponding attribute from the KPIs for that monitortype
For complete and detailed information on this procedure, please refer to the BMC ProactiveNet documentation availablefrom BMC Web site.
Parameters for which the system by default calculates baselines as well as parameters considered asKPIs are respectively identified by the following icons:
Baselining
KPI
Monitoring your Environment
Symantec NetBackup KM for PATROL helps ensure the availability, maximum performance, and integrityof your backup servers, thereby protecting associated data sets.
53Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Administering Symantec NetBackupSymantec NetBackup KM for PATROL provides secure server administration menus, which can beexecuted by PATROL Console users, if they have appropriate privileges. They can more especially:
start or stop the master/media server
assign, deny, or resubmit mount requests
bring standalone or robotic drives online or offline.
Starting the Master/Media ServerIn the Console, right-click the Symantec NetBackup instance > KM Commands>Administrationand select Start Master Server or Start Media Server depending on the server that you wish tostart.
Starting the Master/Media Serv er
54Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Stopping Master Media Server
In the Console, right-click the Symantec NetBackup instance > KM Commands and select StopMaster Server or Stop Media Server depending on the server that you wish to stop.
Stopping the Master/Media Serv er
Assigning, Denying, or Resubmitting Mount RequestsWhen a mount request appears, its parameter NBURequestElapsed is immediately set to alert(Warning or Alarm depending on the elapsed time). The mount request can be assigned, denied, or re-submitted using the menus from the mount request instance:
1. In the Console, right-click the Mount Request instance > KM Commands > Administration
2. Select one of the following options:
Assign
Deny
Resubmit
3. Click Yes to confirm your choice.
A similar menu is available at the Mount Requests instance level to perform any of these actions on all mountrequests at once.
55Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Bringing Standalone Drives Online or Offline
To bring a standalone drive offline or offline:
1. In the Console, right-click the Standalone Drive instance > KM Commands
2. Select one of the following options:
Online Drive
Offline Drive
3. Click Yes to confirm your choice.
Bringing Robotic Drives Online or OfflineTo bring a robotic drive offline or offline:
1. In the Console, right-click the Robotic Library Drive instance > KM Commands
2. Select one of the following options:
Online Drive
Offline Drive
3. Click Yes to confirm your choice.
Configuring the KMThe configuration instructions provided in this section should be followed on all PATROL Agent Systemswhere Symantec NetBackup KM for PATROL is installed.
Before configuring the KM, make sure:
the KM is loaded on the PATROL Console
the NBU_SETUP or Symantec NetBackup instance is displayed in the Console.
56Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring Paths
The solution automatically discovers the installation, binary, and library paths. This information canhowever be overridden.
Altering these paths may impact the operation of the KM.
To configure paths:
1. In the Console, right-click the Symantec NetBackup instance > KM commands >Configuration > Paths
2. In the KM section, verify and possibly modify the Home, Temp, and Debug Directory Paths
3. In the NetBackup section, verify and possibly modify the Installation and the Log DirectoryPaths
4. In the Binary Paths and Library Paths sections:
From the list, select the paths to be removed
In the Path field, enter the new path(s) to be included. If several paths are to be entered,separate them with a colon (:).
5. Click OK.
If you want to rediscover the paths, empty all f ields, click OK, and restart the PATROL Agent.
Specifying the Node TypeYou may have to manually indicate the type of node monitored if the discovery fails to recognize it:
1. In the Console, right-click the Symantec NetBackup instance > KM Commands Configuration> Node Type
2. Select the node type (Master or Media Server)
3. Click OK.
57Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Multi-Node Monitoring Mode
If the Symantec NetBackup environment is installed in a cluster using Veritas Cluster Server, VeritasCluster File System or Oracle Solaris Cluster, the NetBackup KM must be installed on all the clusternodes to enable continuous monitoring and avoid single point of failure. To avoid duplicate alerts frommultiple nodes, it is recommended to configure the solution to operate in multi-node monitoring mode.
To configure the multi-node monitoring mode:
1. In the Console, right-click the Symantec NetBackup instance > KM Commands Configuration> Monitoring Mode
Configuring the Multi-Node Monitoring Mode
2. Select Multi-node Mode
3. Select the appropriate Clustering Application
4. Indicate the Failover Group Name. Leave this field blank if you previously selected Veritas ClusterFile System. The NetBackup KM will then monitor the entire cluster from the active master system,which is identified by the vxdctl -c mode command. This method requires vxconfigd in enablemode with its clustered state active.
5. Enable remote PATROL Agent Checking to check the monitoring status of the other nodes andclick Ok
6. Indicate all the information required to communicate with the remote PATROL Agent (authenticationserver, protocol, port number, and credentials)
7. Click Ok.
Symantec NetBackup will then be monitored through the master or online node. The other nodes, whichare standing by for a failover, will be in passive multi-node mode and only the Symantec NetBackupcomponents will be monitored.
58Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
If a managed node is unable to determine the system which should be in A ctive Multi-node Mode, it will change toTemporary Single-node Mode.
Filtering Elements to MonitorBy default, the solution monitors all the elements discovered, which may represent an importantworkload to the agents and servers. Because the monitoring of some elements may be irrelevant forvarious reasons, you can apply filters to indicate which elements will be monitored or not:
1. In the Console, right-click one of the following instances depending on the elements that you wishto monitor:
Clients > KM Commands > Configuration> Clients to filter clients to be monitored
Daemons > KM Commands > Configuration>Daemons to filter daemons to be monitored
Databases > KM Commands Configuration>Databases to filter databases to be monitored
Logs > KM Commands > Configuration>Logs to filter logs to be monitored. Only the dailymessages file will be monitored on AIX and Microsoft Windows platforms since there is no ASCIIformat system log file to monitor.
Policies > KM Commands > Configuration>Policies to filter policies to be monitored. Policymonitoring is disabled on media servers and in passive multi-node mode.
Policy > KM commands > Configuration > Policy Clients to filter policy clients to bemonitored.
Robotic Libraries > KM Commands > Configuration > Robotic Libraries to filter roboticlibraries to be monitored
Robotic Drive > KM Commands > Configuration>Robotic Drives to filter robotic drives tobe monitored
Standalone Drives > KM Commands > Configuration > Standalone Drives to filterstandalone drives to be monitored
Volume Pools > KM Commands > Configuration>Volume Pools to filter robotic volumepools to be monitored
Storages > KM Commands > Configuration > Storages to filter storages to be monitored
Disk Pool > KM Commands > Configuration > Disk Pools to filter disk pools to bemonitored
Disk Volume > KM Commands > Configuration > Disk Volumes to filter disk volumes to bemonitored
These menus are also available from the child instances.
59Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Client Configuration dialog
The [ALL] entry ensures that all the elements found during PATROL discovery are instantiated andmonitored.
2. To enable elements for monitoring:
In the current configuration list, select the elements to enable
Select Enable
Click Update
A log filter will have to be configured if you enable log files for monitoring.
60Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
3. To disable elements for monitoring:
In the current configuration list, select the elements to disable
Select Disable
Click Update
All jobs associated to disabled policies are not monitored.
Disabled instances will be instantiated in an OFFLINE state. Commands will not be executed, thus leav ing parametersnot set.
4. To delete elements for monitoring:
In the current configuration list, select the elements to delete
Select Delete
Click Update
5. To add a new element to monitor:
Type the name of the element to be monitored
If needed, enter a description
From the Status list, select Enable
Click Update.
To revert to the default monitoring configuration, type “[default]” as a new entry and click Update.
6. Resume the procedure for all the application classes for which you wish to apply monitoring filters.
Configuring Monitoring PeriodsBy default, Symantec NetBackup KM for PATROL monitors all mount requests for 1day and all scheduledjobs that completed successfully for 1 day and any other scheduled job for 3 days . You can howevermodify these settings to better suit your requirements:
Increasing the monitoring period may affect the performance of the application.
61Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Jobs Monitoring Period1. In the Console, right-click the Jobs instance > KM Commands > Configuration > Jobs
Job Filter Configuration dialog
2. Indicate how long the jobs in OK, Suspicious, and Failure status will be monitored. If you:
decrease the monitoring period, older jobs will be destroyed on the next data collection cycle
increase the monitoring period, you'll have to force a full data collection to ensure all jobs areinstantiated. To force data collection, right-click the Jobs instance > KM Commands > ForceFull Collection
62Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
3. Select Keep Monitoring Active Jobs Indefinitely if you want to endlessly monitor active jobs
4. Select Ignore Inactive Jobs initially if you want the inactive jobs not to be created in the initialdiscovery cycle. Initially discovering and monitoring inactive jobs may impact the performance of theapplication.
5. Click OK.
Configuring the Mount Request Monitoring Period1. In the Console, right-click the Mount Requests instance > KM Commands > Configuration >
Mount Requests
Mount Request Filter Configuration Dialog
2. Indicate how long the mount requests will be monitored. If you decrease the monitoring period,older mount requests will be destroyed on the next data collection cycle
3. Click OK.
63Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Elements Status
The status of an element is determined by the State parameter and by the status mapping rule. Thismapping rule indicates which states will trigger a warning or an alarm on the Status parameter. It canbe configured as follows:
1. In the Console, right-click one of the instance for which you want to configure status and select >KM commands > Configuration > Instance Status
Daem on Status Configuration dialog
64Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
2. In the Warning Filter State Rules list, select the states that will not trigger a warning
3. If needed, apply a time condition to a specific state. For example, if you want to trigger a warningwhen the Growing state of the Daemon instance lasts more than 600 minutes:
From the State list, select 7 (Growing)
From the Condition list, select >
In the Minutes field, enter 600
4. In the Alarm Filter State Rules list, select the states that will not trigger an alarm
5. If needed, apply a time condition to a specific state. For example, if you want to trigger an alarmwhen the Not Running state of the Daemon instance lasts more than 30 minutes:
From the State list, select 9 (Not Running)
From the Condition list, select >
In the Minutes field, enter 30
6. Click Update.
To revert to the default status mapping rule for either filter, select [default] from the list of states and clickUpdate .
7. Resume the procedure for all the application classes for which you wish to apply monitoring filters.
65Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Node Status
NetBackup KM allows you to choose which daemons will be used to determine the node status:
1. In the Console, right-click the Symantec NetBackup instance > KM Commands >Configuration > Node Status.
Configuring Node Status
2. In the Monitored daemons list, select the daemons that won't be used to determine the nodestatus
3. In the Daemon field, list the daemons to be used to determine the node status. The Daemon listmust be comma-delimited.
4. To use default settings, type [default] in the Daemon field
5. Click Update.
The NUBNodeStatus parameter will then be set to:
Suspicious if any command run by the NetBackup KM returns a master/media server errormessage
Failure if any configured daemon is not running. Several recovery actions will then be initiated.
66Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring Mount Requests Date/Time Format
The NetBackup KM uses Symantec NetBackup commands to determine the date and time of each mountrequest (used for calculating the elapsed time since the mount request was issued). Depending on yourlocal system time zone and date/time format, the application may return a different date/time format.
To customize the mount request date/time format:
1. In the Console, right-click the Mount Requests instance > KM Commands > Configuration >Mount Request Date/Time Format
Mount Request Date/Tim e Form at Configuration dialog
2. Indicate the expected Date/Time Format.
3. Indicate a PSL-compatible Time Zone String (e.g.: NZDT, NZST, EDT, EST, GMT-1200, etc.)
4. Click OK.
The new date/time format is then applied to all mount requests.
To revert to the default settings, blank out the Date/Time field and/or the Time Zone field and click OK. The Timezone field used will be the local time zone on the managed node.
67Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Log Filter
A log error filter can be configured to specify the regular expressions that will generate a warning or analarm. Each time the KM will find these expressions in a log file or in NBULogText, the error messagewill be written to the NBULogAlarmText or NBULogWarningText parameter. By default, the defaultlog filter is configured for the daily Symantec Netbackup messages file and the system log file. If youenabled additional log files for monitoring, you will have to customize the log filter by adding appropriateexpressions for those log files.
For more information about the possible error messages, refer to the Symantec NetBackup System Administrator’sGuide and the Symantec NetBackup Troubleshooting Guide.
To configure the log error filter:
1. In the Console, right-click the Logs instance > KM Commands > Configuration > Logs Filter
Log Filter Configuration dialog
68Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
2. In the Warning Filter Expressions list, select the expressions that will not trigger a warning
3. In the Alarm Filter Expressions list, select the expressions that will not trigger an alarm
4. To add a new regular expression to the warning or alarm filter:
In the Expression field, indicate the regular expression to be included (e.g.: skipping)
Select Include
Regular expressions are case-sensitive.
5. To exclude a regular expression from the warning or alarm filter:
In the Expression field, indicate the regular expression to be excluded (e.g.: otlsol01). You canalso limit the exclusion to a particular expression already listed by using standard wildcard syntax,such as “skipping . otlsol06”.
Select Exclude
6. Click Update.
To revert to the default settings for either filter, type [default] as a new error expression for that filter, and clickUpdate. If you revert to the default settings when accessed from the log instance level, the settings will revert tothe parent or container instance level. To revert to the shipped default settings (as shown above), access this dialogfrom the log container instance. From this level you will also have the option to reset the configuration of anymodified child instances.
69Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring the Log Scan Limit
The NetBackup KM scans log files by reading the new log entries since the last data collection cycle. Bydefault, only 500 Kbytes of data is scanned for each log file during each data collection cycle. This logscan limit can however be modified to better suit your requirements.
Increasing the Log Scan Limit may impact the performance of the data collector (NBULogCollector),the KM, and the PATROL Agent.
To customize the log scan limit:
1. In the Console, right-click the Log(s) instance > KM Commands > Configuration Log(s) ScanLimit
Custom izing the Log Scan Lim it
2. Indicate the amount of data that will be read by the KM during each data collection cycle
3. Click OK.
70Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring Jobs Erroneous Exit Status Filter
The NBUJobState parameter is set according to the completion state and the exit status reported bySymantec NetBackup. It is set to:
Aborted if the exit status code is 150 (terminated by administrator)
Failed for all non-zero exit status codes (except 150)
Error for all the exit status codes that are included in the erroneous exit status filter.
To configure the erroneous exit status filter:
1. In the Console, right-click the Jobs instance > KM Commands > Configuration > JobsErroneous Exit Status
Configuring the Job Erroneous Ex it Status
71Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
2. In the Erroneous Exit Status Codes field, select the codes that will set the NBUJobStateparameter to Failed
3. In the Exist Status Code field, type:
[default] to use the default settings
or the exit status codes that will set the NBUJobState parameter to Error. Codes entered mustbe delimited by commas.
4. Click Update.
The erroneous exit status filter will then be applied to all monitored jobs.
Configuring Policy Backup RestrictionNetBackup KM can be configured to trigger a warning when a backup is started during a specific periodof time:
1. In the Console, right-click:
the Policies instance > KM Commands > Configuration> Policies Backup Restriction toapply this customization to all policies
a Policy instance > KM Commands > Configuration> Policy Backup Restriction to applythis customization to a specific policy
Policy Backup Restriction Window dialog
2. Select Enabled
3. Indicate the Restriction Start and End Time. The restriction window must at least last 5 minutes.
4. Click OK.
72Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuring Alert Acknowledgement
By default, alerts will automatically be acknowledged unless you modified the settings to allow manualacknowledgement.
Manual acknowledgement may impact the performance of the application and of the PATROL Agentif the number of alerts waiting to be acknowledged constantly increases.
Configuring Logs Alert Acknowledgement
By default, log alerts are automatically acknowledged when new ones are detected. To change thedefault behavior:
1. In the Console, right-click the Log(s) instance > KM Commands > Configuration> Log(s)Alert Acknowledgement
Configuring Log A lert A cknowledgem ent
2. Indicate whether the warning and alarm messages will be manually or automatically acknowledged
3. Click Ok.
Configuring Jobs Alert Acknowledgement
By default, the alerts triggered on the NBUJobStatus parameter for the completed jobs are notacknowledged. If you want these alerts to be automatically acknowledged, you'll have to configure thejob alert acknowledgement as follows:
73Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
1. In the Console, right-click the Jobs instance > KM Commands > Configuration > Job AlertAcknowledgement
Configuring Job A lert A cknowledgem ent
2. Indicate whether the warning and alarm messages will be manually or automatically acknowledged
3. Click Ok.
Refreshing ParametersThis section describes how to manually refresh parameters without waiting for an automatic pollingcycle.
Forcing All Discoveries
To force all discoveries, right-click the Symantec NetBackup instance and select:
Refresh Process Cache to refresh the PATROL Agent process cache
Force Discovery.
The discovery will then be forced on all the KMs loaded on the PATROL Agent and on all the KMapplications classes.
Forcing All Data Collectors
To force all data collectors, right-click the Symantec NetBackup instance and select:
Refresh Process Cache to refresh the PATROL Agent process cache
Refresh parameters to force all data collectors at the same time.
The NetBackup KM data collectors and all the data collectors defined under the application classesloaded on the PATROL Agent will then be refreshed.
74Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Forcing Selected Data Collectors
This option is only available from a PATROL Developer Console.
1. Right-click the Symantec NetBackup instance and select Refresh Process Cache to refresh thePATROL Agent process cache .
2. Force a data collector to execute immediately as follows:
With the PATROL Console for MS Windows
Right-click on the NetBackup KM instance and choose Parameters without Icons...
Select the required data collector.
Click Update.
With the PATROL Console for Unix
Right-click on the NetBackup KM instance and choose Customize > Parameters...
Select the required data collector.
Click Options > Update.
With the PATROL Central Operator Console
Right-click on the NetBackup KM instance and choose Properties
Click on the Parameter List tab
Select the required data collector.
Click Update.
Forcing Full Data Collection for JobsBy default, the NBUJobCollector only searches for new jobs started since the last collection cycle.However, it can be forced to search for all jobs within the monitored time period during the nextcollection cycle.
To force full data collection for jobs, right-click the Jobs instance and select Force Full Collection.
If the Jobs container instance is not instantiated, this menu command cannot be accessed. The PATROL Agent needsto be restarted to force a full data collection for jobs.
Reloading CommandsAll new commands are reloaded automatically but some situations, such as the operating systemupgrade or downgrade, may require a manual commands reload. To do so, in the Console, right-clickthe Symantec NetBackup instance > KM Commands > Reload Commands.
75Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Enabling the Debug Mode
When you encounter an issue and wish to report it to Sentry Software, you will be asked to enable theDebug Mode and provide the debug output to the Sentry Software support team.
Enabling the Debug Mode
1. In the Console, right-click the Symantec NetBackup instance > KM Commands > Configuration> Debug. The NetBackup KM Debug Configuration dialog will be displayed:
Enabling the Debug Mode
76Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
2. Select On for the debug switch(es) you want to enable. Refer to the table below to know theapplication classes and collector parameters included in the debug switch:
Object Debug Switch Application Classes Collector Parameters
Server NBU_SERVER NBUCreateDistributionNBUUpdateAgent
Database NBU_DATABASE_CONTAINERNBU_DATABASE
NBUDatabaseCollector
Log NBU_LOG_CONTAINERNBU_LOG
NBULogCollector
Client NBU_CLIENT_CONTAINERNBU_CLIENT
NBUClientCollector
Robotic Library/Drive NBU_LIBRARY_CONTAINERNBU_LIBRARYNBU_LDEVICENBU_DEVICE_CONTAINERNBU_DEVICE
NBULibraryCollectorNBUDriveCollector
Daemon NBU_DAEMON_CONTAINERNBU_DAEMON
NBUDaemonCollector
Volume Pool NBU_POOL_CONTAINER NBUPoolCollector
Backup NBU_POLICY_CONTAINERNBU_POLICYNBU_PCLIENTNBU_JOB_CONTAINERNBU_JOBNBU_MOUNT_CONTAINERNBU_MOUNT
NBUPolicyCollectorNBUJobCollectorNBURequestCollector
Disk Storage / Pool / Volume NBU_STORAGE_CONTAINERNBU_STORAGENBU_DPOOLNBU_DVOLUME
NBUStorageCollector
3. Set the Debug Options:
In the Debug End Time field, indicate the date and time after which debug information will nolonger be logged.
In the Debug Path field, indicate where the debug file will be stored (by default:<PATROL_HOME>/lib/NBU/debug on Unix systems; %PATROL_HOME%\lib\NBU\debug onMicrosoft Windows systems). The debug folder must have at least 10MB of available disk spaceand read, write and execute permissions for both PATROL Agent user and the NetBackup KMlogin user
Select Send to File(s) to write all debug messages in a file or set of files.
Select Send to Task Window to view the debug messages as they occur in the NBU DebugOutput window. Before selecting this option, make sure the PATROL Console is connected to thePATROL Agent.
Select Both (Recommended) to send the debug messages both to a file and task window.
4. Click OK first to start NetBackup KM debugging
5. Click Yes to reload the KM and capture debug from the initial collection cycle.
Disabling the Debug Mode
The debug switches will be turned off automatically when the debug end time is reached. A tar/zip file
77Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
is then automatically created under <PATROL_HOME>/lib/NBU/ and can be sent to the BMC Support forhelp. It is also recommended to check the SOW or NBU.log file, stored in <PATROL_HOME>/log, for anyerror.
To manually stop debugging:
1. Access the NetBackup KM Debug Configuration dialog
2. Select Off for the debug switch(es) you want to disable
3. Click OK.
Preparing the Debug Files for Sending to Sentry Software
If you chose to only send the output to a task window, you can save the debug output as follows:
Right-click in the NBU KM Debug Output window.
Select Save As and specify a location to save data.
If you chose to send debug information to file(s), you will be asked to prepare the debug files forsending to Sentry Software:
Click Yes to compress the files into a:
nbu_km_debug_<date>_<time>.tar.Z file (Unix systems). This file could later be found in$PATROL_HOME/lib/NBU/
nbu_km_debug_<date>_<time>.zip file (Windows systems). This file could later be foundin %PATROL_HOME%\lib\NBU\
Click No if you do not want to compress the files. You will then be asked if you want to retain ordelete them.
If the compressed file is not created successfully , you can create it manually by including all f iles and sub-directoriesunder $PATROL_HOME/lib/NBU/ (on Unix ) or %PATROL_HOME%\lib\NBU\ (on Microsoft W indows).
Appending Output Data to Existing Files
If you want to gather output from several debug sessions:
1. Disable the debug mode
2. Click No when asked to prepare the files for sending
3. Choose to Retain the debug files.
4. Start the next debug session.
5. Choose to append the output data to existing files.
78Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Acknowledging Alerts
By default, alerts are acknowledged automatically. If you modified the alert acknowledgement defaultsettings, you'll have to manually acknowledge alerts.
Manually Acknowledging Log Alerts
When an error is detected in a monitored log file, it will either appear in NBULogAlarmText orNBULogWarningText and will respectively trigger an Alarm or a Warning on NBULogAlarmCount orNBULogWarningCount.
To acknowledge alerts:
1. In the Console, right-click the Log instance > KM Commands > Acknowledgement
2. Select:
Warning to view, select, and individually acknowledge errors in the NBULogWarningTextparameter
Alarms to view, select, and individually acknowledge errors in the NBULogAlarmTextparameter
All to acknowledge all alerts (Warnings and Alarms) at once without viewing
Manually Acknowledging Job Alerts
For a particular job instance, if the NBUJobStatus has a value of 1=Suspicious or 2=Failure, it will beset to alert with a status of Warning or Alarm respectively. These alerts can be acknowledged using themenu Acknowledgement > Alert from the relevant job instance.
To acknowledge job alerts:
1. In the Console, right-click the Jobs instance > KM Commands > Acknowledgement
2. Select:
Acknowledgement > Warnings to view and acknowledge alerts for all jobs with a status ofWarning.
Acknowledgement > Alarms to view and acknowledge alerts for all jobs with a status ofAlarm.
Acknowledgement > All to view and acknowledge all job alerts (Warnings and Alarms) atonce
79Monitoring your Environment
Version 2.8.01
Symantec NetBackup KM for PATROL
Generating ReportsFollowing is a list of reports available in Symantec NetBackup KM for PATROL.
Daemons > Reports > Daemon List - lists all running Symantec NetBackup daemons
Databases > Reports > Database Backup Information - reports information about the lastcatalog database backup
Logs > Reports > Messages List - reports all messages logged in the past 24 hours
Mount Requests > Reports > Pending Requests - reports a list of all mount requests
<Policy instance> > Reports > Policy Schedule - displays the schedule for the selected policyinstance
Robotic Libraries > Reports > Drive Cleaning Statistics or Standalone Drives > Reports >Drive Cleaning Statistics - reports the drive cleaning statistics on the current master/media server
<Robotic Library instance> > Reports > Robotic Library Contents - reports the contents ofthe selected robotic library instance
<Volume Pool instance> => Reports => Media List - reports information on all media in theselected volume pool instance
Reports can be saved as a task window by clicking Save As Task. You could then save them as a textfile or print them.
Reference Guide
Introduction
This chapter provides statistical information about resources, operating status, and performancesmanaged by Symantec NetBackup KM for PATROL. It contains tables describing the parameters used inthe KM, grouped by Application Classes, and provides a brief description of each parameter and itsdefault settings.
80Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Classes and ParametersThis section lists the application classes of NetBackup KM. It gives you details on the icons that representthe class, Infobox, parameters and the menu commands available for each application class. There are16 main application classes and 11 “container” classes.
NBU_SERVER
NBU_CLIENT_CONTAINER
NBU_CLIENT
NBU_DAEMON_CONTAINER
NBU_DAEMON
NBU_DATABASE_CONTAINER
NBU_DATABASE
NBU_LOG_CONTAINER
NBU_LOG
NBU_POLICY_CONTAINER
NBU_POLICY
NBU_PCLIENT
NBU_JOB_CONTAINER
NBU_JOB
NBU_MOUNT_CONTAINER
NBU_MOUNT
NBU_LIBRARY_CONTAINER
NBU_LIBRARY
NBU_LDEVICE
NBU_DEVICE_CONTAINER
NBU_DEVICE
NBU_POOL_CONTAINER
NBU_POOL
NBU_STORAGE_CONTAINER
NBU_STORAGE
NBU_DPOOL
NBU_DVOLUME
81Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Baselines and Key Performance Indicators
Some parameters are identified by default as Key Performance Indicators (KPIs) and thereforeautomatically included in the base lining calculation. To learn more about auto baselining and KPIs,please refer to the Managing Baselines and Key Performance Indicators chapter.
In this guide, parameters flagged as KPIs and included by default in the baseline calculation process arerespectively identified by the following icons:
Baselining
KPI
NBU_SERVER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
ExtraFilesList Pushes the NetBackup KM library files tothe PATROL Agent during the "Commit"operation.
n/a None n/a
NBUClientCollector Collects Symantec NetBackup clientrelated information. It sets all consumerparameters in the NBU_CLIENT_CONTAINER andNBU_CLIENT application classes. Bydefault, this collector is executed onlyon the master server.
Poll Time: 600 seconds
n/a None n/a
NBUCreateDistribution Is automatically activated at the end ofNetBackup KM debugging if the customerchooses to "prepare debug files forsending to Sentry Software". It isdeactivated on completion.
Poll Time: 300 seconds
n/a None n/a
NBUDaemonCollector Collects Symantec NetBackup daemonrelated information. It sets all consumerparameters in the NBU_DAEMON_CONTAINER andNBU_DAEMON application classes.
Poll Time: 300 seconds
n/a None n/a
82Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUDatabaseCollector Collects Symantec NetBackup catalogdatabase related information. It sets allconsumer parameters in the NBU_DATABASE_CONTAINER andNBU_DATABASE application classes.By default, this collector is executedonly on the master server.
Poll Time: 1800 seconds
n/a None n/a
NBUDriveCollector Collects Symantec NetBackupstandalone drive related information. Itsets all consumer parameters in the NBU_DEVICE_CONTAINER andNBU_DEVICE application classes.
Poll Time: 600 seconds
n/a None n/a
NBUJobCollector Collects Symantec NetBackup backup/restore activity related information. Itsets all consumer parameters in the NBU_JOB_CONTAINER and NBU_JOBapplication classes. By default, thiscollector is executed only on the masterserver.
Poll Time: 300 seconds
n/a None n/a
NBULibraryCollector Collects Symantec NetBackup roboticlibrary and robotic drive relatedinformation. It sets all consumerparameters in the NBU_LIBRARY_CONTAINER,NBU_LIBRARY, and NBU_LDEVICEapplication classes.
Poll Time: 600 seconds
n/a None n/a
NBULogCollector Collects Symantec NetBackup log filerelated information. It sets all consumerparameters in the NBU_LOG_CONTAINER and NBU_LOGapplication classes.
Poll Time: 1800 seconds
n/a None n/a
NBULoginStatus* Monitors the status of the NetBackup KMlogin details (username/password) forthe operating system. It is set by the NBU_SERVER application classdiscovery. If no valid username/password is detected for the operatingsystem, this parameter will be set toFailure state. If there are any suspiciouscommands, this parameter will be set toSuspicious state.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Collection Status
NBUMonitoringMode* Monitors failover mode of the NetBackupKM. It is set by the NBU_SERVERapplication class discovery.
0 =PermanentSingle-nodeMode
None Collection Status
83Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
By default NetBackup KM runs inPermanent Single-node Mode but multi-node monitoring can be configured. Formore details refer to Configuring Multi-Node Monitoring Mode.
1 =TemporarySingle-nodeMode 2 = ActiveMulti-nodeMode3 = PassiveMulti-nodeMode-1 =Unknown
NBUNodeStatus* Monitors error messages for theSymantec NetBackup application on thismanaged system. It is set by the NBU_SERVER application classdiscovery.If any of the Symantec NetBackupapplication daemons is not running, thisparameter will be set to Failure state.The list of critical Symantec NetBackupdaemons can be customized using theKM command Configuration>NodeStatus from the Symantec NetBackupicon. If there are any suspiciouscommands due to an error from themaster/media server, this parameter willbe set to Suspicious state.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUPolicyCollector Collects Symantec NetBackup policy andpolicy client related information. It setsall consumer parameters in the NBU_POLICY_CONTAINER,NBU_POLICY, and NBU_PCLIENTapplication classes.By default, this collector is executedonly on the master server.
Poll Time: 900 seconds
n/a n/a n/a
NBUPoolCollector Collects Symantec NetBackup volumepool related information. It sets allconsumer parameters in NBU_POOL_CONTAINER andNBU_POOL application classes.By default, this collector is executedonly on the master server.
Poll Time: 1800 seconds
n/a n/a n/a
NBURequestCollector Collects Symantec NetBackup pendingrequest related information. It sets allconsumer parameters in the NBU_MOUNT_CONTAINER andNBU_MOUNT application classes.By default, this collector is executedonly on the master server.
Poll Time: 300 seconds
n/a n/a n/a
84Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUStorageCollector Collects Symantec NetBackup storagepool related information. It sets allconsumer parameters in the NBU_STORAGE_CONTAINER,NBU_STORAGE, NBU_DPOOL andNBU_DVOLUME application classes. Bydefault, this collector is executed onlyon the master server.
Poll Time:1800 seconds
n/a n/a n/a
NBUUpdateAgent Is used by the NetBackup KM to set thePATROL Agent KM variables when thePATROL Console user is not authorizedto update (ACL) any PATROL Agentvariables. It is activated automaticallywhen the KM fails to update the PATROLAgent.
Poll Time: 300 seconds
n/a n/a n/a
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Application Name Name of the application monitored by this Knowledge Module.
Application Version Version of the application monitored by this Knowledge Module.
Binary Path Symantec NetBackup software binary paths used by NBU KM.
Copyright Copyright (C) Sentry Software.
Host Name Name of the host as configured on the PATROL Agent.
Installation Path Symantec NetBackup software installation path.
Library Path Symantec NetBackup software library paths used by NBU KM.
Master Server(s) Names of the discovered Master Servers.
Media Server(s) Names of the discovered Media Servers.
Monitoring Mode Monitoring mode of the Knowledge Module.
Monitoring Node Node currently monitoring Symantec NetBackup.
Node Name(s) Name of the current managed system (node) as defined in Symantec NetBackup.
Node Type Type of node (Master Server or Media Server).
Operating System Operating system description as reported by PATROL Agent.
PATROL Agent Version Version of the PATROL Agent installed on the managed system.
Platform Operating system platform as reported by the PATROL Agent (HP, SOLARIS, RS6000, orNT).
Product Name Name of the Knowledge Module.
Product Release Date Release date of the Knowledge Module.
Product Version Version number of the Knowledge Module.
85Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Support [email protected]
Web Site www.bmc.com
Menu Commands
Function Description
Refresh Process Cache Forces the PATROL Agent to reload its process cache from the kernel process list.
Force Discovery Forces application discovery.
Refresh Parameters Forces an update of the application parameter values.
Reload Commands Reloads commands used by the NBU KM during the next full discovery cycle. By default, allnew commands are reloaded automatically.
Administration > StartMaster Server
Starts master server daemons.
Administration > StopMaster Server
Stops master server daemons.
Administration > Start MediaServer
Starts media server daemons.
Administration > Stop MediaServer
Stops media server daemons.
Configuration > Login Accesses the Login Configuration dialog for viewing and entering NBU KM login detailsfor the operating system.This user account should have privileges to execute Symantec NetBackup administrationcommands and can use sudo privileges on Unix PATROL Agents.This user account will be used by NBU KM pre-discoveries, discoveries, data collectors,recovery actions, and InfoBoxes to execute operating system commands. It will not beused by any KM commands.The password is encrypted and stored on the PATROL Agent using the BMC PATROLencryption function.
Configuration > Preloading Accesses the Preloading Configuration dialog, which adds or removes the KM fromPATROL Agent variable "/AgentSetup/preloadedKMs". By preloading the NBU KM,the PATROL Agent will monitor the Symantec NetBackup application without any PATROLConsole connection.
Configuration > MonitoringMode
Accesses the Failover Mode Configuration dialog, which is used for enabling ordisabling KM failover, when monitoring clustered Symantec NetBackup environment.
Configuration > Paths Accesses the Path Configuration dialog, which displays and sets all paths used by NBUKM.Paths are automatically discovered by the NBU KM server discovery. They are used asenvironment variables for executing various Symantec NetBackup application commands.Altering these paths may impact the operation of the KM.
KM paths are used as environment variables and internally:
KM_HOME keeps all KM scripts.
KM_TEMP is used for creating KM temporary files.
KM_DEBUG is used for creating KM debug files.
Binary paths are used as environment variables:
$PATH (on Unix)
%PATH% (on MS Windows)
86Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Library paths are used as environment variables:
$LD_LIBRARY_PATH (on Solaris)
$SHLIB_PATH (on HP-UX)
$LIBPATH (on AIX)
For details about other Symantec NetBackup related paths, refer to the SymantecNetBackup Administrator’s Guide.
Node Type Accesses the Node Type dialog, which displays and sets the type of the SymantecNetBackup application node.The NBU KM master/media server discovery detects the type of the node automatically;the type can either be Master Server or Media Server. The operation of the KM dependson this node type.
Node Status Accesses the Node Status Configuration dialog for viewing and modifying the daemonnames monitored for node status.The NBU KM checks for the existence of these daemons to determine the status of thenode (parameter NBUNodeStatus). By default, the following daemons are sought:
On a Master Server:
Daemon Descriptionbpdbm NetBackup Database Manager Daemonbprd NetBackup Request Daemonvmd Volume Manager Daemon
On a Media Server:
Daemon Descriptionavrd Automatic Volume Recognition Daemonltid Media Manager Device Daemonvmd Volume Manager Daemon
Instance Limits Accesses the Instance Limits Configuration dialog to view and modify the maximumnumber of NBU KM application instances allowed for each application class.
Debug Accesses the Debug Configuration dialog for enabling/disabling the NBU KM debugswitches. By default, all KM debug messages are sent to a set of files and a task window.
KM Status Generates a summary report containing information on the managed system.
About Displays information about the product and manufacturer.
87Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_CLIENT_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUClientDetails Set by NBUClientCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Clients Accesses the dialog for specifying which clients are to be monitored by the NBU KM. Bydefault, all clients configured on the master server are monitored.
Configuration > ClientsStatus
Accesses the global configuration for determining the client status for monitored clientinstances.By default, following NBUClientState to NBUClientStatus mapping rule is used:
NBUClientState NBUClientStatus Access Denied Failure Client Down Failure Unknown Suspicious Connection Refused Suspicious all other states Ok
88Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_CLIENT
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUClientState Set by NBUClientCollector. Displays thestate of the client as reported in thecommand executed by the datacollector.
{0 =Running ;1 =ConnectionRefused ;2 = AccessDenied ;3 = ClientDown ;-1 =Unknown}
None Availability
NBUClientStatus Set by NBUClientCollector. Monitors thestatus of the client. This status isdetermined by the client status mappingrule defined in the KM command Configuration > Client(s) Status. Ifthis status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
{0 = Ok ;1 =Suspicious ;2 = Failure}
Warning = 1Alarm = 2
Availability
NBUClientSummary Set by NBUClientCollector. Summarizesthe client information as reported incommands executed by the datacollector.
n/a None n/a
InfoBox
Name Description
Name Name of the Symantec NetBackup client.
Description Description of the Symantec NetBackup client.
Hardware Hardware platform of the client.
Operating System Operating system of the client.
Status Status of client connectivity from the current node.
Application Name of the application installed on the client that responds to the connection request.
Version Version number of the application installed on the client.
89Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Installation Path Installation path of the application on the client.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Client Sets the client instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > ClientStatus
Accesses the individual configuration for determining client status for the selected clientinstance. By default, the global NBUClientState to NBUClientStatus mapping rule isused, as configured at the container level.
NBU_DAEMON_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDaemonDetails Set by NBUDaemonCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
90Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Daemon List Lists all running Symantec NetBackup daemons.
Configuration > Daemons Accesses the dialog for specifying which daemons are to be monitored by the NBU KM.By default the following daemons are monitored.
On Master Server:Daemon Description Statusavrd Automatic Volume Recognition Daemon Enabledbpcd NetBackup Client Daemon Disabledbpdbm NetBackup Database Manager Daemon Enabledbpjobd NetBackup Job Activity Daemon Disabledbprd NetBackup Request Daemon Enabledltid Media Manager Device Daemon Enabledvmd Volume Manager Daemon Enabled(all other daemons) Enabled
On Media Server:Daemon Description Statusavrd Automatic Volume Recognition Daemon Enabledbpcd NetBackup Client Daemon Disabledltid Media Manager Device Daemon Enabledvmd Volume Manager Daemon Enabled(all other daemons) Enabled
Configuration > DaemonsStatus
Accesses the global configuration for determining the daemon status for monitoreddaemon instances.By default the following NBUDaemonState to NBUDaemonStatus mapping rule isused:
NBUDaemonState NBUDaemonStatus Nonexistent/Not Respondng Failure Not Running Failure Terminated, Stopped, Disabled Suspicious Growing, or Unknown Suspicious all other states Ok
91Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_DAEMON
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDaemonCPUDuration Set by NBUDaemonCollector. Displaysthe CPU seconds consumed by thedaemon.
seconds None Statistics
NBUDaemonCPUUtilization*
Set by NBUDaemonCollector. Displaysthe percentage of CPU used by thedaemon.
% None Statistics
NBUDaemonMemorySize*
Set by NBUDaemonCollector. Displaysthe core image size of the daemon in thevirtual memory.
KB None Statistics
NBUDaemonProcessCount
Set by NBUDaemonCollector. Displaysthe number of daemon processes/threads found.
processes None Statistics
NBUDaemonState Set by NBUDaemonCollector. Displaysthe state of the daemon as reported inthe command executed by the datacollector.
0 = Running1 = Sleeping2 = Waiting3 = Queued4 =Intermediate5 =Terminated6 =Stopped/Disabled7 = Growing8 =Nonexistent/NotResponding9 = NotRunning-1 =Unknown
None Availability
92Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUDaemonStatus Set by NBUDaemonCollector. Monitorsthe status of the daemon. This status isdetermined by the daemon statusmapping rule defined in the KMcommand Configuration>Daemon(s)Status. If this status parameterchanges to warning or alarm state, therecovery action will trigger an event andannotate the last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDaemonSummary Set by NBUDaemonCollector.Summarizes the daemon information asreported by commands executed by thedata collector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the Symantec NetBackup daemon.
Description Description of the Symantec NetBackup daemon.
PID Process ID of the daemon.
PPID Parent process ID of the daemon.
Owner Owner of the daemon.
Status Status of the daemon as reported in the PATROL Agent process cache.
Command Command that started the daemon.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Daemon Sets the daemon instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > DaemonStatus
Accesses the individual configuration for determining daemon status for the selected thedaemon instance.By default, the global NBUDaemonState to NBUDaemonStatusmapping rule is used, as configured at the container level.
93Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_DATABASE_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDatabaseBackupElapse
d*
Set by NBUDatabaseCollector. Displaysthe elapsed time since the lastsuccessful database backup. Thespecified alarm ranges can be enabled toallow the output of the parameter to beactively monitored. Then, if thisparameter changes to warning or alarmstate, the recovery action will trigger anevent.
hours None Statistics
NBUDatabaseDetails Displays all data returned to thestandard out from commands executedby the data collector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Last Backup Date & time when the catalog database was last backed up.
Last Backup Mode Backup mode of the last backup of the catalog database.
Last Backup Job ID Identifier of the last catalog database backup job.
94Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Reports > Database BackupInformation
Reports information about the last catalog database backup.
Configuration > Database Accesses the dialog for specifying which catalog databases are to be monitored by theNBU KM.By default, following database paths are monitored. These database paths are relative toSymantec NetBackup installation directory (for example /usr/openv on HP-UX).
On Unix:Database Description Statusnetbackup/db NetBackup Catalog Enabledvar Authentication Catalog Enabledvolmgr/database Media Manager Catalog Enabled
On Microsoft Windows:Database Description StatusNetBackup\db Backup Details Catalog EnabledNetBackup\var Authentication Catalog EnabledVolmgr\database Media & Device Catalog Enabled
NBU_DATABASE
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDatabaseFSSpaceUsed
Percent*
Set by NBUDatabaseCollector. Monitorsthe percentage of space used by the filesystem where the database resides. Ifthis parameter changes to warning oralarm state, the recovery action willtrigger an event.
% Warning: 95-98Alarm: 98-100
Statistics
NBUDatabaseSpaceAvailable
Set by NBUDatabaseCollector. Monitorsthe amount of assigned space remainingavailable for use by the catalogdatabase. If this parameter changes towarning or alarm state, the recoveryaction will trigger an event.
MB Warning: 2-5Alarm: 0-2
Availability
NBUDatabaseSpaceGrowthRate
Set by NBUDatabaseCollector. Displaysthe growth rate of the space used bythe catalog database.
MB/s None Statistics
95Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUDatabaseSpaceUsed Set by NBUDatabaseCollector. Displaysthe amount of assigned space used bythe catalog database.
MB None Statistics
NBUDatabaseSpaceUsedPe
rcent*
Set by NBUDatabaseCollector. Monitorsthe percentage of assigned space usedby the catalog database. If thisparameter changes to warning or alarmstate, the recovery action will trigger anevent.
% Warning: 95-98Alarm: 98-100
Statistics
NBUDatabaseSummary Set by NBUDatabaseCollector.Summarizes the database information asreported by commands executed by thedata collector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the Symantec NetBackup catalog database.
Description Description of the Symantec NetBackup catalog database.
Path Full file path of the catalog database.
Last Purge Date & time when the catalog database was last purged.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Database Sets the database instance to be enabled or disabled for monitoring by the NBU KM.
96Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_LOG_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBULogDetails Set by NBUDatabaseCollector.Summarizes the database information asreported by commands executed by thedata collector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Messages List Reports all Symantec NetBackup messages logged in the past 24 hours.
Configuration > Logs Accesses the dialog for specifying which log files are to be monitored by the NBU KM.By default, the following log files are monitored. These log file paths are relative to theSymantec NetBackup installation directory (for example /usr/openv on HP-UX), unless thepath is fully qualified as for the system log on Solaris and HP-UX.
On Solaris:Log File Description Statusnetbackup/db/error/daily_messages.log Daily NetBackup Messages Enabled/var/adm/messages System Log Enabled
On HP-UX:
97Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Log File Description Statusnetbackup/db/error/daily_messages.log Daily NetBackup Messages Enabled/var/adm/syslog/syslog.log System Log Enabled
On AIX:Log File Description Status netbackup/db/error/daily_messages.log Daily NetBackup Messages Enabled
On Linux:Log File Description Statusnetbackup/db/error/daily_messages.log Daily NetBackup Messages Enabled/var/log/messages System Log Enabled
On Microsoft Windows:Log File Description StatusNetBackup\db\error\daily_messages.log Daily NetBackup Messages Enabled
Configuration > Logs Filter Accesses the global configuration of the filter for expressions used for detecting errormessages in the monitored log file instances.By default, the following "Included" expressions are looked for in each log file. If detected,the message containing the expression is added to the appropriate text parameter, unlessthe message also contains an "Excluded" expression for the same filter.
Error Expression Set to Parameter Statusdaemon\.error NBULogAlarmText Includedexited NBULogAlarmText Includedskipping NBULogAlarmText Includedavrd NBULogWarningText Includedltid NBULogWarningText Includedtld NBULogWarningText Includedvmd NBULogWarningText Included
Configuration > Logs ScanLimit
Accesses the global configuration of the data scanning limit for monitored log file instances.By default, the log collector scans 500 KBytes of new log data for each monitored log fileduring each data collection cycle.
Configuration > Logs AlertAcknowledgement
Accesses the global configuration of the method of acknowledgement for alerts onmonitored log file instances.By default, the log collector automatically acknowledges previous log alerts (warnings oralarms) when it detects new errors.
NBU_LOG
Icon
98Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBULogAlarmCount* Set by NBULogCollector. Monitors thenumber of alarm messages set in theparameter NBULogAlarmText.
If this parameter changes to alarmstate, the recovery action will trigger anevent.
count Alarm: morethan or equal1
Statistics
NBULogAlarmText Set by NBULogCollector. Displays allalarm messages in the log file whichhave not been acknowledged. The filterused by the data collector to determinealarm messages can be customized usingthe KM command Configuration>Log(s) Filter.
These alarm messages can beacknowledged automatically (default) ormanually, depending on theconfiguration in the KM command Configuration > Log(s) AlertAcknowledgement. Manualacknowledgement is available under theKM sub-menu Acknowledgement.
n/a None n/a
NBULogFSSpaceUsedPerce
nt*
Set by NBULogCollector. Monitors thepercentage of space used by the filesystem (where the log file resides).
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% Warning:between 95and 98Alarm : 98 and over
Statistics
NBULogSpaceAvailable Set by NBULogCollector. Monitors theavailable space for the log file to use(this is also the available space on thefile system).If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
MB Warning:between 2and 5Alarm: 2 orless
Availability
NBULogSpaceGrowthRate Set by NBULogCollector. Displays thegrowth rate of the amount of spaceused by the log file.
KB/s None Statistics
NBULogSpaceUsed Set by NBULogCollector. Displays theamount of space used by the log file.
KB None Statistics
NBULogSpaceUsedPercent*
Set by NBULogCollector. Monitors thepercentage of capacity used by the logfile. The total capacity is the used space(NBULogSpaceUsed) plus available space(NBULogSpaceAvailable). If thisparameter changes to warning or alarmstate, the recovery action will trigger anevent.
% Warning:between 95and 98Alarm: 98 andover
Statistics
99Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBULogSummary Set by NBULogCollector. Summarizes thelog file information as reported bycommands executed by the datacollector.
n/a None n/a
NBULogText Set by NBULogCollector. Displays all logtext scanned by the data collectorduring the last collection cycle. The sizeof the data scanned by the datacollector is configured in the KMcommand Configuration>Log(s)Scan Limit.
n/a None n/a
NBULogWarningCount* Set by NBULogCollector. Monitors thenumber warning messages set in theparameter NBULogWarningText.
If this parameter changes to a warningstate, the recovery action will trigger anevent.
count Warning:more than orequal to 1
Statistics
NBULogWarningText Set by NBULogCollector. Displays allwarning messages in the log file whichhave not been acknowledged. The filterused by the data collector to determinewarning messages can be customizedusing the KM command Configuration>Log(s) Filter.
These warning messages can beacknowledged automatically (default) ormanually, depending on theconfiguration set through the KMcommand Configuration>Log(s)Alert Acknowledgement. Manualacknowledgement is available under theKM sub-menu Acknowledgement.
n/a None n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the Symantec NetBackup log file.
Description Description of the Symantec NetBackup log file.
Path Full file path of the log file.
Log File Modification Time Date & time when the log file was last modified.
Log File Size File size of the log file.
Total FS Space Total space used by the file system.
Available FS Space Space available for use by the file system.
FS Percent Used Percentage of the total file system space used.
Last Purge Date & time when the log file was last purged.
100Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Acknowledgement > Warnings
Allows acknowledgement of warning messages detected on the selected log file instance.This dialog allows selective acknowledgement of "suspicious" error messages detected inthe log file and sent to the text parameter NBULogWarningText.
Acknowledgement > Alarms Allows acknowledgement of alarm messages detected on the selected log file instance.This dialog allows selective acknowledgement of "failure" error messages detected in thelog file and sent to the text parameter NBULogAlarmText.
Acknowledgement >All Allows acknowledgement of all alarm and warning messages detected on the selected logfile instance.This dialog allows acknowledgement of all error messages detected in the log file and sentto the text parameter NBULogWarningText or NBULogAlarmText.
Configuration > Log Accesses the individual configuration for monitoring the selected log file instance.This dialog allows the selected log file instance to enabled or disabled for monitoring by theNBU KM.
Configuration > Log Filter Accesses the individual configuration of the log error filter for the selected log file instance.By default, the global log filter is used, as configured at the container level.
Configuration > Log ScanLimit
Accesses the individual configuration of the data scanning limit for the selected log fileinstance.By default, the global log file scanning limit is used, as configured at the container level.
Configuration > Log AlertAcknowledgement
Accesses the individual configuration of the method of acknowledgement for alerts on theselected log file instance.By default, the global method of log error acknowledgement is used, as configured at thecontainer level.
NBU_POLICY_CONTAINER
Icon
101Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUPolicyDetails Set by NBUPolicyCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Policies Sets which policies are to be monitored by the NBU KM. By default, all policies configuredon the master server are monitored.
Configuration > PoliciesBackup Restriction
Accesses the global configuration to set a backup restriction window for all monitoredpolicy instances. By default, backup restriction is disabled.When the backup restriction window is defined and enabled using this dialog, and if thepolicy status mapping rule is configured appropriately, an alert will be triggered if anybackup activity is detected during this restriction window.
Configuration > PoliciesStatus
Accesses the global configuration for determining the policy status for monitored policyinstances.By default, the following NBUPolicyState to NBUPolicyStatus mapping rule is used:
NBUPolicyState NBUPolicyStatusRunning in Restricted Window FailureRunning for more than 600 minutes SuspiciousUnknown Suspiciousall other states Ok
102Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_POLICY
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUPolicyBackupElapsed*
Set by NBUPolicyCollector. Displays theelapsed time since the last backup forthis policy, regardless of completionstatus of the backup. This last backup isdetermined from the monitored jobs asconfigured in the KM command Configuration>Jobs from the Jobsicon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, the recoveryaction will trigger an event.
hours None Statistics
NBUPolicyBackupSummary Set by NBUPolicyCollector. Summarizesthe last backup for this policy.
n/a n/a n/a
NBUPolicyBackupThroughpu
t*
Set by NBUPolicyCollector. Displays thethroughput of the last backup for thispolicy.
GB/s None Statistics
NBUPolicyFullBackupDuratio
n
Set by NBUPolicyCollector. Displays theduration of the last successful fullbackup for this policy.
seconds None Statistics
NBUPolicyFullBackupElapse
d*
Set by NBUPolicyCollector. Displays theelapsed time since the last successful fullbackup for this policy. This last backup isdetermined from the monitored jobs asconfigured in the KM command Configuration>Jobs from the Jobsicon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, the recoveryaction will trigger an event.
hours None Statistics
NBUPolicyFullBackupFileCou
nt
Set by NBUPolicyCollector. Displays thenumber of files backed up in the lastsuccessful full backup for this policy.
count None Statistics
103Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUPolicyFullBackupSize
Set by NBUPolicyCollector. Displays thesize of the last successful full backup forthis policy.
GB None Statistics
NBUPolicyIncrBackupDurati
on
Set by NBUPolicyCollector. Displays theduration of the last successfulincremental backup for this policy.
seconds None Statistics
NBUPolicyIncrBackupElapse
d*
Set by NBUPolicyCollector. Displays theelapsed time since the last successfulincremental backup for this policy. Thislast backup is determined from themonitored jobs as configured in the KMcommand Configuration>Jobs fromthe Jobs icon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, the recoveryaction will trigger an event.
hours None Statistics
NBUPolicyIncrBackupFileCo
unt
Set by NBUPolicyCollector. Displays thenumber of files backed up in the lastsuccessful incremental backup for thispolicy.
count None Statistics
NBUPolicyIncrBackupSize
Set by NBUPolicyCollector. Displays thesize of the last successful incrementalbackup for this policy.
GB None Statistics
NBUPolicyState Set by NBUPolicyCollector. Displays thestate of the policy.
If a backup restriction window is definedin the KM command Configuration>Policy (Policies) BackupRestriction, this parameter will be setto Running in Restricted Window if thereis any activity during the specifiedperiod.
0 = Idle1 = Running2 = Runningin RestrictedWindow-1 =Unknown
None Availability
NBUPolicyStatus Set by NBUPolicyCollector. Monitors thestatus of the policy. This status isdetermined by the policy status mappingrule defined in the KM command Configuration> Policy (Policies)Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUPolicySuccBackupElaps
ed*
Set by NBUPolicyCollector. Displays theelapsed time since the last successfulbackup for this policy. This last backup isdetermined from the monitored jobs asconfigured in the KM command Configuration>Jobs from the Jobsicon.
hours None Statistics
104Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, the recoveryaction will trigger an event.
NBUPolicySummary Set by NBUPolicyCollector. Summarizesthe policy information as reported bycommands executed by the datacollector.
n/a None n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the Symantec NetBackup policy.
Description Description of the Symantec NetBackup policy.
Type Type of the policy.
Active Status of the policy (yes or no).
Priority Priority of the policy.
Keyword Keyword phrase used by the policy to associate all its backups.
Max Jobs/Policy Maximum number of concurrent jobs allowed for the policy.
Multiple Data Stream Whether the multiple data streaming is allowed for this policy (yes or no).
Residence Label of the storage unit used by the policy.
Status Current execution status of the policy (Idle, Running, or Running in Restricted Window).
Volume Pool Volume pool of the policy.
Last Backup Start Date & time when the last backup started for the policy.
Last Backup End Date & time at the completion of the last backup for the policy.
Last Backup Status Status of the last backup for the policy.
Last Backup Job ID Job ID of the last backup for the policy.
Last Full Backup Start Date & time when the last successful full backup started for the policy.
Last Full Backup End Date & time at the completion of the last successful full backup for the policy.
Last Full Backup Job ID Job ID of the last successful full backup for the policy.
Last Incr Backup Start Date & time when the last successful incremental backup started for the policy.
Last Incr Backup End Date & time at the completion of the last successful incremental backup for the policy.
Last Incr Backup Job ID Job ID of the last successful incremental backup for the policy.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
105Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time at the completion of the last data collection cycle.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Policy Schedule Displays the schedule of the selected policy instance.
Configuration > Policy Accesses the individual configuration for monitoring the selected policy instance.This dialog allows the selected policy instance to be enabled or disabled for monitoring bythe NBU KM.
Configuration > PolicyBackup Restriction
Accesses the individual configuration for the backup restriction window for the selectedpolicy instance.By default, the global backup restriction rule is used, as configured at the container level.
Configuration > PolicyStatus
Accesses the individual configuration for determining policy status for the selected policyinstance.By default, the global NBUPolicyState to NBUPolicyStatus mapping rule is used, asconfigured at the container level. Select [default] to revert to the policy status mappingrule configured at the global/container level.
Configuration > PolicyClients
Accesses the dialog for specifying which policy clients of the selected policy are to bemonitored by the NBU KM.By default, all policy clients of enabled policies are monitored. Type "[default]" to reset tothe default configuration.
106Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_PCLIENT
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUFileExcludeList Set by NBUPolicyCollector. Lists all filesand file systems excluded from backupfor this policy client.
n/a n/a n/a
NBUFileIncludeList Set by NBUPolicyCollector. Lists all filesand file systems included for backup forthis policy client.
n/a n/a n/a
NBUPClientBackupSummary Set by NBUPolicyCollector. Summarizesthe last backup for this policy client.
n/a n/a n/a
NBUPClientBackupThroughp
ut*
Set by NBUPolicyCollector. Displays thethroughput of the last backup for thispolicy client.
MB/s None Statistics
NBUPClientFullBackupDurati
on
Set by NBUPolicyCollector. Displays theduration of the last successful fullbackup for this policy client.
seconds None Statistics
NBUPClientFullBackupFileCo
unt
Set by NBUPolicyCollector. Displays thenumber of files backed up in the lastsuccessful full backup for this policyclient.
count None Statistics
NBUPClientFullBackupSize*
Set by NBUPolicyCollector. Displays thesize of the last successful full backup forthis policy client.
MB None Statistics
NBUPClientIncrBackupDurat
ion
Set by NBUPolicyCollector. Displays theduration of the last successfulincremental backup for this policy client.
seconds None Statistics
NBUPClientIncrBackupFileC
ount
Set by NBUPolicyCollector. Displays thenumber of files backed up in the lastsuccessful incremental backup for thispolicy client.
count None Statistics
NBUPClientIncrBackupSize*
Set by NBUPolicyCollector. Displays thesize of the last successful incrementalbackup for this policy client.
MB None Statistics
107Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUPClientSummary Set by NBUPolicyCollector. Summarizesthe policy client information as reportedby commands executed by the datacollector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Host name of the Symantec NetBackup policy client.
Description Description of the Symantec NetBackup policy client.
Policy Name Name of the policy that the policy client belongs to.
Hardware Hardware platform of the policy client.
Operating System Operating system of the policy client.
Priority Priority of the policy client.
Last Backup Start Date & time when the last backup started for the policy client.
Last Backup End Date & time when the last backup completed for the policy client.
Last Backup Status Status of the last backup for the policy client.
Last Backup Job ID Job ID of the last backup for the policy client.
Last Full Backup Start Date & time when the last successful full backup started for the policy client.
Last Full Backup End Date & time when the last successful full backup completed for the policy client.
Last Full Backup Job ID Job ID of the last successful full backup of the policy client.
Last Incr Backup Start Date & time when the last successful incremental backup started for the policy client.
Last Incr Backup End Date & time when the last successful incremental backup completed for the policy client.
Last Incr Backup Job ID Job ID of the last successful incremental backup of the policy client.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
108Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Configuration > Policy Client Sets the policy client instance to be enabled or disabled for monitoring by the NBU KM.
NBU_JOB_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUJobActiveBackupCount
*
Set by NBUJobCollector. Displays thenumber of active backup jobs currentlydiscovered and monitored.
count None Statistics
NBUJobActiveCount* Set by NBUJobCollector. Displays thenumber of active jobs currentlydiscovered and monitored.
count None Statistics
NBUJobActiveNonBackupCo
unt*
Set by NBUJobCollector. Displays thenumber of active non-backup jobscurrently discovered and monitored.
count None Statistics
NBUJobDetails Set by NBUJobCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
109Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Force Full Collection Allows the user to force the data collector for jobs to perform a full discovery during thenext collection cycle.
Acknowledgement > Warnings
Allows acknowledgement of warning alerts occurring on any monitored job instance.This dialog allows acknowledgement of any job in a "suspicious" state (which sets theparameter NBUJobStatus to Warning).
Acknowledgement > Alarms Allows acknowledgement of alarms occurring on any monitored job instance.This dialog allows acknowledgement of any job in a "failure" state (which sets theparameter NBUJobStatus to Alarm).
Acknowledgement > All Allows acknowledgement of all warnings and alarms occurring on any monitored jobinstance.This dialog allows acknowledgement of any job in a "suspicious" or "failure" state (whichsets the parameter NBUJobStatus to Warning or Alarm, respectively.
Configuration > Jobs Accesses the dialog for specifying which jobs are to be monitored by the NBU KM.By default, all scheduled jobs on the master server are monitored according to thefollowing conditions:NBUJobStatus Monitored forOk 1 daySuspicious 3 daysFailure 3 days The age of a job is calculated from the job start time. The status of a job is determined bythe state of the job (from the parameter NBUJobState) and the job status mapping rule,described below.
Configuration > JobsErroneous Exit Status
Accesses the configuration for erroneous exit status codes for all backup and restore jobs.This filter is used for setting the parameter NBUJobState to "5 Error", when a backup orrestore job returns a non-zero exit status. The exit status codes are mapped toparameter NBUJobState as shown below:
Exit Status Code NBUJobState 0 depends on the completion status any listed exit status code 5 Error 150 6 Aborted any other exit status code 7 Failed
The default configuration for the filter contains only the exit status "1".
Configuration > Jobs Status Accesses the configuration for determining the status for all monitored job instances.By default, the following NBUJobState to NBUJobStatus mapping rule is used: NBUJobState NBUJobStatus Aborted or Suspended or Incomplete or Failed Failure Errors or Unknown Suspicious Queued for more than 60 minutes Suspicious Mounting for more than 60 minutes Suspicious In Progress for more than 300 minutes Suspicious Requeued for more than 60 minutes Suspicious all other states Ok
Configuration > Jobs AlertAcknowledgement
Accesses the global configuration of the method of acknowledgement for alerts onmonitored job instances.By default, the job alerts are manually acknowledged. Using this menu you can change thisso the job collector automatically acknowledges previous job alerts (warnings or alarms)when it detects new errors.
110Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_JOB
Icon
Parameters
Jobs Monitoring is disabled on media servers and in passive multi-node mode.
Name Description Units DefaultAlertConditions
BPPM Type
NBUJobDuration Set by NBUJobCollector. Displays theduration of the job from the start.
seconds None Statistics
NBUJobFileCount Set by NBUJobCollector. Displays thenumber of files backed up for this job.
count None Statistics
NBUJobSize Set by NBUJobCollector. Displays theamount of data backed up for the job.
MB None Statistics
NBUJobState Set by NBUJobCollector. Displays thestate of the job. This is determinedusing the job completion state, job exitstatus code, last job operation, and theerroneous exit status filter.
The erroneous exit status filter can becustomized using the KM menu Configuration>Jobs Erroneous ExitStatus. If the exit status code isincluded in the erroneous exit statusfilter, it will be set to Errors.
0 =Completed1 = Queued2 =Mounting3 = InProgress4 = InProgress/Error5 =Requeued6 = Error7 = Aborted8 =Suspended9 =Incomplete10 = Failed-1 =Unknown
None Availability
NBUJobStatus Set by NBUJobCollector. Monitors thestatus of the job. This status isdetermined by the job status mappingrule defined in the KM command Configuration>Jobs Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
111Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUJobSummary Set by NBUJobCollector. Summarizes thejob information as reported bycommands executed by the datacollector.
n/a n/a n/a
NBUJobText Set by NBUJobCollector. Displays allreported messages related to this job.
n/a n/a n/a
NBUJobThroughput* Set by NBUJobCollector. Displays thethroughput of this job.
MB/s None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Attempt Number of attempts of the job.
Client Host name of the policy client associated with the job.
Collector Last End Date & time when the last data collection cycle completed.
Collector Last Start Date & time when the last data collection cycle started.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Completion Status Completion status of the job.
Duration Duration of the job.
End Date & time when the job completed.
Exit Status Exit status code of the job.
Files Number of files that have been written for the job.
Job ID Identifier assigned to the job by Symantec NetBackup.
Job PID Process ID of the job.
Last Backup Duration Duration of the last similar successful backup.
Last Backup End Date & time when the last similar successful backup completed.
Last Backup Files Number of files written by the last similar successful backup.
Last Backup Job ID Job ID of the last similar successful backup.
Last Backup Size Amount of data written by the last similar successful backup.
Last Backup Start Date & time when the last similar successful backup started.
Media Server Host name of the media server associated with the job.
Operation Last operation performed by the job.
Owner Owner of the job.
112Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Percent Completed Estimated percentage of the job that has been completed in comparison with the lastsimilar successful job for the same policy, policy client, and schedule.
Policy Name Name of the policy used by the job.
Policy Type Type of the policy used by the job.
Priority Priority of the job.
Schedule Type Type of the schedule used by the job.
Schedule Name of the schedule used by the job.
Size Amount of data that has been written for the job.
Schedule Start Schedule start time.
Schedule End Schedule end time.
Start Date & time when the job was initiated.
Status Status of the job as determined by the NBU KM.
Storage Unit Name of the storage unit that the job is using.
Subtype Subtype of the schedule used by the job.
Time Remaining Remaining time of the job in comparison with the last similar successful job.
Type Type of the job.
Menu Commands
Function Description
Acknowledgement > Alert Sets the job instance is in a "suspicious" or "failure" state (which sets the parameter NBUJobStatus to Warning or Alarm, respectively).
113Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_MOUNT_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBURequestDetails Set by NBURequestCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Administration > Assign All Assigns all instantiated mount requests to their requested drives.
Administration > Deny All Denies all instantiated mount requests.
Administration > ResubmitAll
Resubmits all instantiated mount requests.
Reports > Pending Requests Reports a list of all pending mount requests.All report KM commands require a user account, which will be used for executing the menucommand. Note the command will fail if the user does not have privileges to execute theappropriate Symantec NetBackup command.
Configuration > MountRequests
Accesses the dialog for specifying which mount requests are to be monitored by the NBUKM.By default, all mount requests are monitored for 1 day from the time they are issued.
114Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuration > MountRequests Status
Accesses the configuration for determining the status for all monitored mount requestinstances.By default, the following NBURequestState to NBURequestStatus mapping rule isused:
NBURequestState NBURequestStatus Pending for more than 30 minutes Failure Pending or Unknown Suspicious all other states Ok
Configuration > MountRequest Date/Time Format
Accesses the configuration of the date/time format and time zone for all instantiatedmount requests.By default, the format used by Symantec NetBackup for the date/time of a mount requestis set to "MO/DD/YY HH:MM:SS". The date/time is then converted by the NBU KM using thesystem time zone on the PATROL Agent (system time zone is indicated by an empty field).
NBU_MOUNT
Icon
Parameters
Mount Requests Monitoring is disabled on media servers and in passive multi-node mode.
Name Description Units DefaultAlertConditions
BPPM Type
NBURequestElapsed* Set by NBURequestCollector. Displaysthe elapsed time since the mountrequest was issued.
minutes None Statistics
NBURequestState Set by NBURequestCollector. Displaysthe state of the mount request asreported in the command executed bythe data collector.
0 =Completed1 = Pending-1 =Unknown
None Availability
NBURequestStatus Set by NBURequestCollector, monitorsthe status of the mount request. Thisstatus is determined by the mountrequest status mapping rule defined inthe KM command Configuration>Mount Request(s)Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
115Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBURequestSummary Set by NBURequestCollector.Summarizes the pending requestinformation as reported by commandsexecuted by the data collector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Request ID Full name assigned for the pending request.
Description Description of the pending request.
Job ID ID of the job the pending request belongs to.
Job Type Type of the job the pending request belongs to (Backup or Restore).
Policy Name Name of the policy the pending request belongs to.
Client Name of the policy client the pending request belongs to.
Recorded Media ID Requested media identifier as recorded in the media label.
External Media ID Requested media identifier as recorded on the media cartridge or canister.
Density Density of the requested media.
Mode Mode of the pending request (Write or Read).
Barcode Barcode of the requested media.
Volume Group Volume group of the requested media.
Media Server Host name of the media server that issued the pending request.
Storage Unit Name of the storage unit that the media should be mounted on.
User User ID of the person or application the pending request belongs to.
Request Time Date & time when the pending request was issued. This is interpreted using the PendingRequest Date/Time Format defined in the KM menu command.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
116Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Administration > Assign Assigns the selected pending request to its requested drive.
Administration > Deny Denies the selected pending request.
Administration > Resubmit Resubmits the selected pending request.
NBU_LIBRARY_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBULibraryDetails Set by NBULibraryCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Drive CleaningStatistics
Reports the drive cleaning statistics on the current master/media server.
117Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Configuration > RoboticLibraries
Accesses the dialog for specifying which robotic libraries are to be monitored by the NBUKM.By default, all local and remote robotic libraries are monitored for a master server and alllocal robotic libraries are monitored for a media server.
Configuration > RoboticLibraries Status
Accesses the global configuration for determining the status for monitored robotic libraryinstances.By default, the following NBULibraryState to NBULibraryStatus mapping rule is used:
NBULibraryState NBULibraryStatus Invalid or Offline Failure Unknown Suspicious all other states Ok
Configuration > RoboticDrives Status
Accesses the global configuration for determining the status for monitored robotic driveinstances (configured under monitored robotic library instances).By default, the following NBURDriveState to NBURDriveStatus mapping rule is used:
NBURDriveState NBURDriveStatus Down Failure Pending for more than 5 minutes Failure In Use for more than 600 minutes Suspicious Unknown Failure all other states Ok
NBU_LIBRARY
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBULibraryMediaAssignedC
ount
Set by NBULibraryCollector. Displays thenumber of assigned media loaded in thisrobotic library. (Assigned media are tapemedia assigned to a non-scratch volumepool.)
count None Statistics
NBULibraryMediaAvailableC
ount
Set by NBULibraryCollector. Displays thenumber of media available to use in thisrobotic library. This includes unassignedand scratch media.
count None Statistics
NBULibraryMediaAvailableP
ercent*
Set by NBULibraryCollector. Monitors thepercentage of available media againstthe total number of media loaded in thisrobotic library.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% Warning:between 2and 5Alarm: 2 orless
Statistics
118Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBULibraryMediaCleaningLe
ft
Set by NBULibraryCollector. Monitors thenumber of cleaning left on the cleaningmedia available in this robotic library.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
count Warning: 2 orlessAlarm: 0
Statistics
NBULibraryMediaCount Set by NBULibraryCollector. Displays thetotal number of media loaded in thisrobotic library.
count None Statistics
NBULibraryMediaScratchCo
unt
Set by NBULibraryCollector. Displays thenumber of scratch media loaded in thisrobotic library. (Scratch media are tapemedia assigned to the scratch volumepool.)
count None Statistics
NBULibraryMediaScratchPer
cent*
Set by NBULibraryCollector. Monitors thepercentage of scratch media against thetotal number of media loaded in thisrobotic library.If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% None Statistics
NBULibraryMediaUnassigne
dCount
Set by NBULibraryCollector. Displays thenumber of unassigned media loaded inthis robotic library.(Unassigned media are tape media notassigned to a volume pool.)
count None Statistics
NBULibraryMediaUnassigne
dPercent*
Set by NBULibraryCollector. Monitors thepercentage of unassigned media againstthe total number of media loaded in thisrobotic library.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% None Statistics
NBULibraryState Set by NBULibraryCollector. Displayswhether the inquiry for the roboticlibrary is valid or invalid. It will notperform any remote robotic library testcommand on the media server.
0 = Online1 = Remote2 = Offline3 = Invalid-1 =Unknown
None Availability
NBULibraryStatus Set by NBULibraryCollector. Monitors thestatus of the robotic library. This statusis determined by the robotic librarystatus mapping rule defined in the KMcommand Configuration> RoboticLibrary (Libraries) Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBULibrarySummary Set by NBULibraryCollector. Summarizesthe robotic library information asreported by commands executed by thedata collector.
n/a None n/a
119Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBULibraryThroughput* Set by NBULibraryCollector. Displays thetotal throughput of each robotic librarydrive during the last backup activitieswithin the last hour.
MB/s None Statistics
NBULibraryUpDriveCount Set by NBULibraryCollector. Displays thenumber up / online state drives in thisrobotic library.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
count None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Robotic LibraryContents
Reports the contents of the selected robotic library.
Configuration > RoboticLibrary
Sets the robotic library instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > RoboticLibrary Status
Accesses the individual configuration for determining the status for the selected roboticlibrary instance. By default, the global NBULibraryState to NBULibraryStatusmapping rule is used, as configured at the container level.
Configuration > RoboticDrives
Accesses the dialog for specifying which drives of the selected robotic library are to bemonitored by the NBU KM. By default, all robotic drives of the selected robotic library aremonitored.
Configuration > RoboticDrives Status
Accesses the configuration for determining status for the monitored drive instances on theselected robotic library instance. By default, the global NBURDriveState toNBURDriveStatus mapping rule is used, as configured at the container level.
120Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_LDEVICE
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBURDriveState Set by NBULibraryCollector. Displays thestate of the robotic drive. This isdetermined from the robotic drivecontrol information.
0 = Idle1 =Mounted2 = In Use3 = Pending4 = Down-1 =Unknown
None Availability
NBURDriveStatus Set by NBULibraryCollector. Monitors thestatus of the robotic drive. This status isdetermined by the robotic drive statusmapping rule defined in the KMcommand Configuration>RoboticDrive(s) Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBURDriveSummary Set by NBULibraryCollector. Summarizesthe robotic drive information as reportedby commands executed by the datacollector.
n/a n/a n/a
NBURDriveThroughput* Set by NBULibraryCollector. Displays thethroughput of the robotic drive duringthe last backup activity.
MB/s None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the robotic drive.
Description Description of the drive.
121Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Path Device path of the drive.
Type Media type used in the drive.
Device Host Name of the remote host where the drive is connected.
Serial Number Serial number of the drive.
Drive Index Unique index assigned to the drive.
Robot Number Unique number assigned to the robotic library where the drive is located.
Robot Type Type of the robotic library where the drive is located.
Robot Drive Number Unique number assigned to the robotic drive within the robotic library.
Control Control mode for the drive.
User User ID of the person or application whose request is currently assigned to this drive.
Media ID Media identifier of the media mounted on this drive.
Request ID ID of the pending request, if this drive is assigned to a pending request .
Status Status of the drive as determined by the NBU KM.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Administration > OnlineDrive
Allows the selected robotic drive to be brought online.
Administration > OfflineDrive
Allows the selected robotic drive to be taken offline.
Configuration > RoboticDrive
Sets the drive instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > RoboticDrive Status
Accesses the individual configuration for determining the drive status for the selectedrobotic drive instance.By default, the NBURDriveState to NBURDriveStatus mapping rule configured at theparent level is used. (Note that if the mapping rule has not been modified for the parentrobotic library, then the default is the global mapping rule configured at the containerlevel.)
122Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_DEVICE_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDriveDetails Set by NBUDriveCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
123Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Reports > Drive CleaningStatistics
Reports the drive cleaning statistics on the current master/media server.
Configuration > StandaloneDrives
Accesses the dialog for specifying which standalone drives are to be monitored by the NBUKM. By default, all local and remote standalone drives are monitored for a master serverand all local standalone drives are monitored for a media server.
Configuration > StandaloneDrives Status
Accesses the global configuration for determining the status for monitored standalonedrive instances.By default, the following NBUDriveState to NBUDriveStatus mapping rule is used: NBUDriveState NBUDriveStatus Down Failure Pending for more than 5 minutes Failure In Use for more than 600 minutes Suspicious Unknown Suspicious all other states Ok
NBU_DEVICE
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDriveState Set by NBUDriveCollector. Displays thestate of the standalone drive. This isdetermined from the standalone drivecontrol information.
0 = Idle1 =Mounted2 = In Use3 = Pending4 = Down-1 =Unknown
None Availability
NBUDriveStatus Set by NBUDriveCollector. Monitors thestatus of the standalone drive. Thisstatus is determined by the standalonedrive status mapping rule defined in theKM command Configuration>Standalone Drive(s) Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
124Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUDriveSummary Set by NBUDriveCollector. Summarizesthe standalone drive information asreported by commands executed by thedata collector.
n/a n/a n/a
NBUDriveThroughput* Set by NBUDriveCollector. Displays thethroughput of the standalone driveduring the last backup activity.
MB/s None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the standalone drive.
Description Description of the drive.
Path Device path of the drive.
Type Media type used in the drive.
Device Host Name of the remote host where the drive is connected.
Serial Number Serial number of the drive.
Drive Index Unique index assigned to the drive.
Control Control mode for the drive.
User User ID of the person or application whose request is currently assigned to this drive.
Media ID Media identifier of the media mounted on this drive.
Request ID ID of the pending request, if this drive is assigned to a pending request .
Status Status of the drive as determined by the NBU KM.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
125Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Reports > Drive CleaningStatistics
Reports the drive cleaning statistics on the current master/media server.
Configuration > StandaloneDrives
Accesses the dialog for specifying which standalone drives are to be monitored by the NBUKM.By default, all local and remote standalone drives are monitored for a master server and alllocal standalone drives are monitored for a media server.
Configuration > StandaloneDrives Status
Accesses the global configuration for determining the status for monitored standalonedrive instances.By default, the following NBUDriveState to NBUDriveStatus mapping rule is used: NBUDriveState NBUDriveStatus Down Failure Pending for more than 5 minutes Failure In Use for more than 600 minutes Suspicious Unknown Suspicious all other states Ok
NBU_POOL_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUPoolDetails Set by NBUPoolCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
126Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > VolumePools
Sets which volume pools are to be monitored by the NBU KM. By default, all volume poolsconfigured on the master/media server are monitored, except for "None" (the default poolshipped with the Symantec NetBackup application).
NBU_POOL
Icon
Parameters
Pool monitoring is disable on media servers and in passive multi-node mode
Name Description Units DefaultAlertConditions
BPPM Type
NBUMediaActiveCount Set by NBUPoolCollector. Displays thenumber of active media in this volumepool. Active media are available tapemedia with a status of Active, wheredata has been written but the media isnot yet full.
count None Statistics
NBUMediaActivePercent*
Set by NBUPoolCollector. Monitors thepercentage of active media against thetotal number of media in this volumepool.
% Warning: 2-5Alarm: 0-2
Statistics
127Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
NBUMediaCount Set by NBUPoolCollector. Displays thetotal number of media in this volumepool.
count None Statistics
NBUMediaEmptyCount Set by NBUPoolCollector. Displays thenumber of full media in this volume pool.Empty media are available tape mediawith a status Active and no data storedon them.
count None Statistics
NBUMediaFrozenCount Set by NBUPoolCollector. Displays thenumber of frozen media in this volumepool. Frozen is a possible status for atape media.
count None Statistics
NBUMediaFullCount Set by NBUPoolCollector. Displays thenumber of full media in this volume pool.Full is a possible status for a tape media.
count None Statistics
NBUMediaFullPercent* Set by NBUPoolCollector. Monitors thepercentage of full media against thetotal number of media in this volumepool.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% Warning:95-98Alarm: 98-100
Statistics
NBUMediaLoadedCount Set by NBUPoolCollector. Displays thenumber of media in this volume pool,currently loaded to a robotic library.
count None Statistics
NBUMediaReadOnlyCount
Set by NBUPoolCollector. Displays thenumber of media in this volume pool,currently read-only. A media turns read-only when it has reached the maximumallowed mounts.
count None Statistics
NBUMediaScratchCount Set by NBUPoolCollector. Displays thenumber of scratch media in this volumepool. The parameter is visible and setonly for scratch volume pools.
count Warning: 0-2Alarm = 0
Statistics
NBUMediaSuspendedCount
Set by NBUPoolCollector. Displays thenumber of suspended media in thisvolume pool. Suspended is a possiblestatus for a tape media.
count None Statistics
NBUMediaUnassignedCount
Set by NBUPoolCollector. Displays thenumber of media in unassigned state inthis volume pool.
count None Statistics
NBUMediaUnassignedPerce
nt*
Set by NBUPoolCollector. Monitors thepercentage of unassigned media againstthe total number of media in this volumepool.If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
% None Statistics
NBUMediaUnknownCount
Set by NBUPoolCollector. Displays thenumber of media in unknown state in thisvolume pool.
count None Statistics
128Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUPoolSpaceAvailable* Set by NBUPoolCollector. Monitors theavailable media space for the backupdata to use amongst the assigned mediain this volume pool.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
GB None Availability
NBUPoolSpaceGrowthRate Set by NBUPoolCollector. Displays thegrowth rate of the total media spaceused by the backup data in this volumepool.
GB/s None Statistics
NBUPoolSpaceUsed* Set by NBUPoolCollector. Displays thetotal media space occupied by thebackup data in this volume pool.
GB None Statistics
NBUPoolSpaceUsedPercent
*
Set by NBUPoolCollector. Monitors thepercentage of total occupied mediaspace against the total media capacityof this volume pool (not including anyscratch media). If this parameterchanges to warning or alarm state, therecovery action will trigger an event.
% Warning: 95-98Alarm: 98-100
Statistics
NBUPoolSummary Set by NBUPoolCollector. Summarizesthe volume pool information as reportedby commands executed by the datacollector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the volume pool.
Description Description of the pool.
Host Name Name of the host that will be permitted to request and use volumes in this pool.
User User ID of the person or application who is permitted to use volumes in this pool.
Group Name of the operating system user group allowed to use volumes in this pool.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
129Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Reports > Media List Reports all volumes in the volume pool.
Configuration > Volume Pool Sets the volume pool instance to be enabled or disabled for monitoring by the NBU KM.
NBU_STORAGE_CONTAINER
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUStorageDetails Set by NBUStorageCollector. Displays alldata returned to the standard out fromcommands executed by the datacollector.
n/a n/a n/a
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
130Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Configuration > Storages Accesses the dialog for specifying which storages are to be monitored by the NBU KM. Bydefault, all local and remote storages are monitored for a master server and all localstorages are monitored for a media server.
Configuration > StoragesUp/Down Status
Accesses the global configuration for determining the up/down status for monitoredstorage instances.
By default, the following NBUStorageUpDownState to NBUStorageUpDownStatusmapping rule is used:NBUStorageUpDownState NBUStorageUpDownStatus Down Failure Invalid or Unknown Warning all other states Ok
Configuration > Disk PoolsUp/Down Status
Accesses the global configuration for determining the up/down status for monitored diskpool instances.
By default, the following NBUDPoolUpDownState to NBUDPoolUpDownStatusmapping rule is used:NBUDPoolUpDownState NBUDPoolUpDownStatus Down Failure Invalid or Unknown Warning all other states Ok
Configuration > DiskVolumes Up/Down Status
Accesses the global configuration for determining the up/down status for monitored diskvolume instances.
By default, the following NBUDVolumeUpDownState toNBUDVolumeUpDownStatus mapping rule is used:NBUDVolumeUpDownState NBUDVolumeUpDownStatus Down Failure Invalid or Unknown Warning all other states Ok
131Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBU_STORAGE
Icon
Parameters
Storage monitoring is disabled in passive multi-node mode
Name Description Units DefaultAlertConditions
BPPM Type
NBUStorageSummary Set by NBUStorageCollector. Summarizesthe storage information as reported bycommands executed by the datacollector.
n/a n/a n/a
NBUStorageUpDownState Set by NBUStorageCollector. Displaysthe up/down state of the storage.
0 = Down1 = Up-1 =Unknown
None Availability
NBUStorageUpDownStatus Set by NBUStorageCollector. Monitorsthe up/down status of the storage. Thisstatus is determined by the storagestatus mapping rule defined in the KMcommand Configuration>Storage(s)Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
InfoBox
Name Description
Storage Server Name of the host where the storage is attached to.
Storage Server Type Type of the storage server.
Description Description of the storage.
Up/Down State Up/down status of the storage.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
132Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Storage Sets the storage instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > Storage Up/Down Status
Accesses the individual configuration for determining storage up/down status for theselected storage instance.By default, the global NBUStorageUpDownState to NBUStorageUpDownStatusmapping rule is used, as configured at the container level.
Configuration > Disk Pools Sets which disk pools of the selected storage are to be monitored by the NBU KM. Bydefault, all disk pools of the selected storage are monitored.
Configuration > Disk PoolsUp/Down Status
Accesses the configuration for determining up/down status for the monitored disk poolinstances on the selected storage instance.By default, the global NBUDPoolUpDownState to NBUDPoolUpDownStatus mappingrule is used, as configured at the container level.
Configuration > DiskVolumes Up/Down Status
Accesses the configuration for determining up/down status for the monitored disk volumeinstances on the selected storage instance.By default, the global NBUDVolumeUpDownState to NBUDVolumeUpDownStatusmapping rule is used, as configured at the container level.
NBU_DPOOL
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDPoolSummary Set by NBUStorageCollector.Summarizes the disk pool information asreported by commands executed by thedata collector.
n/a n/a n/a
NBUDPoolUpDownState Set by NBUStorageCollector. Displaysthe up/down state of the disk pool.
0 = Down1 = Up-1 =Unknown
None Availability
133Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
NBUDPoolUpDownStatus Set by NBUStorageCollector. Monitorsthe up/down status of the disk pool.This status is determined by the diskpool status mapping rule defined in theKM command Configuration>Disk Pool(s)Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDPoolVolumeCount* Set by NBUStorageCollector. Displaysthe number of volumes in the disk pool.
count None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the disk pool
Description Description of the disk pool.
Storage Server Name of the host where the disk pool is attached to.
Storage Server Type Type of the storage server.
Up/Down State Up/down status of the disk pool (1 – Up, 0 – Down).
Raw Size Raw disk size of the disk pool.
Usable Size Usable disk size of the disk pool.
High Watermark High watermark for the volumes in disk pool.
Low Watermark Low watermark for the volumes in disk pool.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
134Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Function Description
Configuration > Disk Pool Accesses the configuration for monitoring the selected disk pool instance.This dialog allows the selected disk pool instance to be enabled or disabled for monitoringby the NBU KM.
Configuration > Disk PoolUp/Down Status
Accesses the individual configuration for determining disk pool up/down status for theselected disk pool instance.By default, the global NBUDPoolUpDownState to NBUDPoolUpDownStatus mappingrule is used, as configured at the container level.
Configuration > DiskVolumes
Accesses the dialog for specifying which disk volumes of the selected disk pool are to bemonitored by the NBU KM. By default, all disk volumes of the selected disk pool aremonitored.
Configuration > DiskVolumes Up/Down Status
Accesses the configuration for determining up/down status for the monitored disk volumeinstances on the selected disk pool instance. By default, the global NBUDVolumeUpDownState to NBUDVolumeUpDownStatus mapping rule is used,as configured at the container level.
NBU_DVOLUME
Icon
Parameters
Name Description Units DefaultAlertConditions
BPPM Type
NBUDVolumeReadSt
reamCount*
Set by NBUStorageCollector. Displays thenumber of current read steams for the diskvolume
count None Statistics
NBUDVolumeSpaceAvailable*
Set by NBUStorageCollector. Monitors theavailable disk volume space for the backup datato use.
If this parameter changes to warning or alarmstate, the recovery action will trigger an event.
GB Warning:between 0and ≤ 1Alarm:between 1and 0
Availability
NBUDVolumeSpaceGrowthRate
Set by NBUStorageCollector. Displays thegrowth rate of the disk space used by thebackup data in this disk volume.
GB/s None Statistics
NBUDVolumeSpaceU
sed*
Set by NBUStorageCollector. Displays the diskspace occupied by the backup data in this diskvolume.
% None Statistics
NBUDVolumeSpaceU
sedPercent
Set by NBUStorageCollector. Monitors thepercentage of occupied disk space against thecapacity of this disk volume.
% Warning: 95-98Alarm: 98-100
Statistics
135Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
If this parameter changes to warning or alarmstate, the recovery action will trigger an event.
NBUDVolumeSummary
Set by NBUStorageCollector. Summarizes thedisk volume information as reported bycommands executed by the data collector.
n/a None n/a
NBUDVolumeUpDownState
Set by NBUStorageCollector. Displays the up/down state of the disk volume.
0 = Down1 = Up-1 =Unknown
None Availability
NBUDVolumeUpDownStatus
Set by NBUStorageCollector. Monitors the up/down status of the disk volume. This status isdetermined by the disk volume status mappingrule defined in the KM commandConfiguration>Disk Volume(s) Status.
If this status parameter changes to warning oralarm state, the recovery action will trigger anevent and annotate the last data point.
0 = Ok1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDVolumeWriteSt
reamCount*
Set by NBUStorageCollector. Displays thenumber of current write steams for the diskvolume
count None Statistics
For detailed information about B a se lining and KP I, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when v isualizing the corresponding monitor instance in BPPM.
InfoBox
Name Description
Name Name of the disk volume.
Description Description of the disk volume.
Storage Server Name of the host where the disk volume is attached to.
Disk Pool Name Name of the disk pool the volume belongs to.
Disk Type Type of the disk.
Disk Media ID Media ID of the disk.
Up/Down State Up/down status of the disk volume (1 – Up, 0 – Down).
Total Capacity Total disk capacity of the disk volume.
Free Space Free disk space in the volume.
Used Percent Percentage of used disk space.
Number of ReadMounts
Number of read mounts of the disk volume.
Number of WriteMounts
Number of write mounts of the disk volume.
Collector Name Name of the data collector that sets variables and parameters under this application instance.
Collector Last Start Date & time when the last data collection cycle started.
136Reference Guide
Version 2.8.01
Symantec NetBackup KM for PATROL
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > DiskVolume
Sets the disk volume instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > DiskVolume Up/DownStatus
Accesses the individual configuration for determining disk volume up/down status for the selecteddisk volume instance.By default, the global NBUDVolumeUpDownState to NBUDVolumeUpDownStatus mappingrule is used, as configured at the container level.
Additional Information
TroubleshootingThe table below will help you diagnose any problems you may encounter when installing or runningSymantec NetBackup KM for PATROL. Here are some troubleshooting tips:
For any problem, look for error messages on the PATROL Console System Output Window (SOW).Most error messages are self-explanatory.
Most KM problems are reported in the KM Status Report, which can be viewed by selecting themenu KM Status from the Symantec NetBackup or NBU_SETUP icon. Run this report to diagnoseany problems.
The NetBackup KM triggers PEM events for most severe problems. Each event triggered from theKM includes an Expert Advice, which provides details about the problem and some suggestions toresolve it.
Problem Possible Resolution
Unable to find NBU_LOAD.kml
Check that the Load KM browser is looking for *.kml files under PATROL_HOME/lib/knowledge folder.
Symantec NetBackup KM for PATROL files have not been installed correctly under the PATROLinstallation directory on the PATROL Console.
NBU_SETUPicon does not appear
Check whether this managed node is a supported Symantec NetBackup node (master serveror media server), and it is configured properly.
137Additional Information
Version 2.8.01
Symantec NetBackup KM for PATROL
after loading Check that the version of Symantec NetBackup is supported by the Symantec NetBackup KMfor PATROL.
Check that there is no KM version mismatch between the PATROL Console and the PATROLAgent. Check the messages in the PATROL Console SOW to verify this.
Check whether the PATROL Agent tuning variable,/AgentSetup/AgentTuning/pslInstructionMax has been increased as suggested in section Changes to BMC PATROL.Check the messages in the PATROL Console SOW.
Check whether the PATROL Agent user has necessary privileges added in the Agent’s AccessControl List (/AgentSetup/accessControlList) in order to read and write to the AgentConfiguration Database.
Parameter NBULoginStatus is in suspicious (warning) status
This parameter will also show a “suspicious” state if any command executed by NetBackup KMfails.
Check the annotation point on the first state change data point of this parameter to look forany failing commands. If an annotation point cannot be found, or if it is not up-to-date,check the KM Status Report, which can be viewed by selecting the menu KM Status fromthe Symantec NetBackup icon. These errors are produced from the Symantec NetBackupcommands executed by the NetBackup KM.
Check that the operating system user configured in the menu Configuration>Login canexecute all NetBackup commands and access the NetBackup files.
All/some KM objects disappear from the Console
Check whether there is a KM version mismatch between the PATROL Console and thePATROL Agent, possibly after an improper upgrade of the KM. Check the messages in thePATROL Console SOW to verify this.
Check that the NetBackup KM login details are still valid. Has the password changed on thesystem? Look for any error messages on the SOW, and check for additional information in thelast annotation point for parameter NBULoginStatus.
All/some KM application instances do not appear
Check that the KM instance limits have not been exceeded. Look for any error messages onthe SOW, and increase the instance limits for affected objects using the menu Configuration>Instance Limits.
Check the messages in the PATROL Console SOW for suggestions for the new limit. Theseerrors are also displayed in the KM Status Report, which can be viewed by selecting themenu KM Status from the Symantec NetBackup icon.
Check whether the main instance, Symantec NetBackup, is in offline state. None of the datacollectors will be executed until the main instance is created in online state. The main instanceis created in offline state until the initial discovery is complete. Also if the KM is configured tofailover in a VCS clustered Symantec NetBackup environment the main container will becreated in offline state on all nodes where the service group is offline.
Behavior of the NetBackup KM hasnot changed in accordance withtheRelease Notesaftera KM upgrade
Check the version of the KM from the main InfoBox. If it has not changed, then theinstallation is not complete. Make sure both the PATROL Console and the PATROL Agent areuninstalled and installed correctly during the KM upgrade
NetBackup KMtakes a long timetorefresh the parameters and applicationclasses on the PATROL Console
Data collectors run according to their scheduling interval (polling cycle) defined in the KM. Theseintervals are defined for a standard environment with minimal resource impact. These intervalscan be customized from the PATROL Developer Console to suit your environment. Refer to thePATROL Console User Guide for more details.
138Additional Information
Version 2.8.01
Symantec NetBackup KM for PATROL
Poorperformance of the Symantec NetBackup master/mediaserver after installingthe KM
This happens if the NetBackup KM is installed on a heavily used system. Depending on thecomplexity of your Symantec NetBackup environment, the NetBackup KM may consume moreresources to interrogate the application and process the data. In such a complex environment,the NetBackup KM may require some fine tuning to optimize the available resources. Considerthe following options:
Disable monitoring of unnecessary application instances. This can be achieved by using theappropriate menu Configuration><Component(s)>.
Increase the scheduling interval (polling cycle) for data collectors.
Deactivate unnecessary data collectors and associated application classes.
Deactivate unnecessary data collectors during selected time intervals, where there are noSymantec NetBackup activity. For example, if the job monitoring can be disabled between 9am and 4 pm everyday, except weekends, then disable job data collector(NBUJobCollector) during this period, using following PSL through PATROL Console:
%PSL pconfig("REPLACE","/NBU/NBUJobCollectorMode",
"0|32400|57600|0|0|||||||||||0|0");
Here the pconfig variable is named as: <collector name>Mode. The value contains followingdetails, delimited by pipe (|):enabled (1)/disabled (0) data collection, default start/end times innumber of seconds since midnight, start/end times for non-default days starting from Sundaythrough to Saturday.
Purge unnecessary information in Symantec NetBackup catalog databases and log files.
If there are too many clients configured in Symantec NetBackup, the NBUClientCollectorand NBUPolicyCollector may affect the overall performance. In such environment disablethe NBUClientCollector, or set their instance limits to 0 (zero), using menuConfiguration> Instance Limits.
Also refer to Infinite Loop Errors for a possible PATROL internal scheduling delay which mayimpact the performance of the KM.
Old active jobsare not removedfrom the console
By default, all active jobs are monitored, and they are exempted from ageing. It is possible tochange this behavior by Including Active Jobs in the menu Configuration>Jobs from Jobscontainer.
Infinite LoopErrors(Error messageson the SOWreporting that some NetBackup KM data collectorsmay be in an infinite loop)
Check the setting of the tuning variable /AgentSetup/AgentTuning/pslInstructionMax.
PATROL Agent uses the pre-configured tuning variable (/AgentSetup/AgentTuning/pslInstructionMax) to stop running PSL functions in an infinite loop. When a PSL functionreaches this maximum threshold, it reports this error, and puts the execution of this function tothe back of the process queue. This will not only delay the data collector, it will also impact theperformance of the system.
To resolve this situation, the maximum number of instructions should be increased to anoptimum value. This depends on the complexity of your environment. It is required that thedefault value of 500,000 should be increased to at least 5,000,000 on a standard SymantecNetBackup environment to enable the NetBackup KM data collectors to execute withoutimpacting your system.
If this still does not resolve the problem, you can disable this functionality by setting the valueof the tuning variable to zero (0).
Unable to turn on the KM Debug
If you are unable to turn on the KM Debug following the method described in Debugging theKM , you turn the debug on by setting appropriate PATROL Agent configuration variable with atimestamp value. This timestamp value determines when the debug should be turned off. Forexample, to turn on the debug for 60 minutes from now, run the following PSL through PATROL Console:
%PSL pconfig("REPLACE","Runtime/NBU/<component>Debug",
time()+3600);
139Additional Information
Version 2.8.01
Symantec NetBackup KM for PATROL
Where <Component> is either server for debugging the server discovery or name of thecollector component in lower case followed by “Collector”, like daemonCollector fordebugging daemon collector.
Oldacknowledged jobs are still keptin the pconfig database.
By default the KM stores all acknowledged jobs. Use the following PSL through PATROL Consoleto keep only the last <Number> of jobs:
%PSL pconfig("REPLACE",
"/NBU/NBU_JOB/jobAcknowledgementCapacity",
<Number>);
Prefer a different job instance label
By default the job instances are labeled as:<policy>:<policy client> @ <date/time>
This label can be changed to include job ID as in one of the following formats:Format 1: <job id>Format 2: <job id>: <policy client> @ <date/time>Format 3: <job id>: <policy>:<policy client> @ <date/time>
Use the following PSL through PATROL Console to modify the job instance label:%PSL pconfig("REPLACE","/NBU/labelByJobID",
<Format Number>);
Where <Format Number> is either 1, 2, or 3 as described above. Use the menu Force FullCollection from the Jobs container instance to recreate the job instances.
Impact on ResourcesThis section describes:
• CPU and memory usage of the KM
• Network traffic generated by the KM
CPU and Memory Usage
CPU and memory usage will depend on the size and complexity of your environment and your NetBackupKM configuration. As you increase data collection frequency, increase the number of instancesmonitored by the KM or add functionality through customization, your CPU and memory usage willincrease.
When monitoring a standard installation of Symantec NetBackup using NetBackup KM, the PATROL Agentwill consume between 5MBytes and 10MBytes of additional system memory. An enterprise installation ofSymantec NetBackup Master Server with multiple Media Servers, Clients, Storage Servers and StorageUnits can consume more memory (as per other KMs used by the PATROL Agent). The memory usage ofNetBackup KM can be reduced by:
• disabling monitoring unnecessary component instances (by using the configuration menu)
• disabling unwanted components (by setting their instance limits to 0)
• disabling unwanted collectors (by using the PATROL Configuration Manager)
• increasing the collector scheduling interval (by using the PATROL Configuration Manager)
• decreasing the instance limits to limit the number of instances created by the collectors
The data collectors in NetBackup KM uses Symantec NetBackup command line interface to obtainSymantec NetBackup information. Most of the performance degradation is associated with thesecommand executions and amount of data returned. It may improve the overall performance, if the
140Additional Information
Version 2.8.01
Symantec NetBackup KM for PATROL
regular housekeeping is followed on all Symantec NetBackup systems.
Network Traffic
Under normal conditions, the NetBackup KM generates minimal network traffic. Most of the data is kepton the managed node. The amount of network traffic that it generates depends on the number ofPATROL Consoles that are connected to the PATROL Agent and the frequency of data collection.
Customer SupportYou can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email. To expedite your inquiry, please see "BeforeContacting BMC Software."
Support Web Site
You can obtain technical support from BMC Software 24 hours a day, 7 days a week at http://www.bmc.com/support_home. From this Web site, you can
Read overviews about support services and programs that BMC Software offers:
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information, including emailaddresses, fax and telephone numbers
Support by Telephone or Email
In the United States and Canada, if you need technical support and do not have access to the Web, call800 537 1813. Outside the United States and Canada, please contact your local support center forassistance. To find telephone and email contact information for the BMC Software support center thatservices your location, refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at http://www.bmc.com/support_home.
Before Contacting BMC Software
Before you contact BMC Software, have the following information available so that Customer Supportcan begin working on your problem immediately:
141Additional Information
Version 2.8.01
Symantec NetBackup KM for PATROL
Product information
product name
product version (release number)
Operating system and environment information, machine type, operating system type, version, andservice pack or other maintenance level, such as:
PUT or PTF
system hardware configuration
serial numbers
related software (database, application, and communication) including type, version, and service
pack or maintenance
level
Sequence of events leading to the problem
Commands and options that you used
Messages received (and the time and date that you received them)
product error messages
messages from the operating system, such as "file system full"
messages from related software
Index 142
Version 2.8.01
Symantec NetBackup KM for PATROL
Index
- A -Abnormalities 51
Access
Executable Files 14
Files 14
Library Files 14
Paths 14
Permissions 14Acknowledge
Alarm 78
Alerts 78
Job Alerts 78
Log Alerts 78
Mount Request 54
Warning 78Acknowledgement
Configure 72
Job 72
Log 72Adapter 49
Add 49, 50
Create 49
Update 50Administer
Symantec NetBackup 53Administration
Robotic Drives 55
Standalone Drives 55Agent
PATROL 44AIX 14
Alarm
Acknowledge 78Alarm Filter State Rules 63
Alert Acknowledgement 72
Configure 72
Job 72
Log 72Alerts
Acknowledge 78Application Class
NBU_CLIENT 88
NBU_CLIENT_CONTAINER 87
NBU_DAEMON 91
NBU_DAEMON_CONTAINER 89
NBU_DATABASE 94
NBU_DATABASE_CONTAINER 93
NBU_DEVICE 123
NBU_DEVICE_CONTAINER 122
NBU_DPOOL 132
NBU_DVOLUME 134
NBU_JOB 110
NBU_JOB_CONTAINER 108
NBU_LDEVICE 120
NBU_LIBRARY 117
NBU_LIBRARY_CONTAINER 116
NBU_LOG 97
NBU_LOG_CONTAINER 96
NBU_MOUNT 114
NBU_MOUNT_CONTAINER 113
NBU_PCLIENT 106
NBU_POLICY 102
NBU_POLICY_CONTAINER 100
NBU_POOL 126
NBU_POOL_CONTAINER 125
NBU_SERVER 81
NBU_STORAGE 131
NBU_STORAGE_CONTAINER 129
- B -Baselines
BMC ProactiveNet Performance Management 51
Generation 51
Manage 51
Requirements 51BMC
BMC Portal 49
BMC ProactiveNet Performance ManagementPortal 12
BMC Software PATROL Agent 12
BMC Software PATROL Console 12
Requirements 12BMC PATROL
Changes 12
pslInstructionMax 12BMC ProactiveNet
Integration 49BMC ProactiveNet Performance Management
Index 143
Version 2.8.01
Symantec NetBackup KM for PATROL
BMC ProactiveNet Performance Management
Abnormalities 51
Baselines 51
Key Performance Indicators 51
KPI 51
- C -Changes 8
Check
Instance Limits 46Classes 80
Clients
Delete 58
Disable 58
Enable 58
Status Configuration 63Cluster
Configure 57Clustering Application 57
Commands
Reload 74Configure
Alert Acknowledgement 72
Cluster 57
Jobs Erroneous Exit Status Filter 70
KM User Account 44
Log Error Filter 67
Log Scan Limit 69
Monitoring Period 60
Multi-Node Monitoring Mode 57
Node Status 65
Node Type 56
Paths 56
PATROL Agent 41
Policy Backup Restriction 71Customize
Monitored Mount Requests 66
Mount Request Date/Time Format 66
Mount Request Status 66
Mount Requests 66
- D -Daemons
Delete 58
Disable 58
Enable 58
Status Configuration 63Data Collection for Jobs
Force 73Data Collectors
Force 73Databases
Delete 58
Disable 58
Enable 58Debug
Disable 75
Enable 75
End 75
Files 75
Path 75Delete
Clients 58
Daemons 58
Databases 58
Logs 58
Policies 58
Policy Clients 58
Robotic Drives 58
Robotic Libraries 58
Standalone Drives 58
Storages 58
Volume Pools 58Disable
Clients 58
Daemons 58
Databases 58
Debug 75
Logs 58
Policies 58
Policy Clients 58
Robotic Drives 58
Robotic Libraries 58
Standalone Drives 58
Storages 58
Volume Pools 58Discoveries
Force 73Discovery
Verify 46Disk Space
Requirements 19
Index 144
Version 2.8.01
Symantec NetBackup KM for PATROL
- E -Enable
Clients 58
Daemons 58
Databases 58
Debug 75
Logs 58
Policies 58
Policy Clients 58
Robotic Drives 58
Robotic Libraries 58
Standalone Drives 58
Storages 58
Volume Pools 58
- F -Failover Group Name 57
Files 21
ins_ALL_<version>.tar 20
ins_WINDOWS_<version>.exe 20
Setup 21
setup.exe 22
setup.sh 22
uninstall.exe 34
uninstall.sh 34Filtering Options
Clients 58
Daemons 58
Databases 58
Logs 58
Policies 58
Policy Clients 58
Robotic Drives 58
Robotic Libraries 58
Standalone Drives 58
Storages 58
Volume Pools 58Force
All Data Collectors 73
All Discoveries 73
Full Data Collection for Jobs 73
Selected Data Collectors 73
- G -Generate
Baselines 51
- H -HP-UX 14
- I -Improvement 8
InfoBox
Active 102
Application 88
Application Name 81
Application Version 81
Attempt 110
Available FS Space 97
Barcode 114
Binary Path 81
Client 110, 114
Collector Last End 87, 88, 89, 91, 93, 94,96, 97, 100, 102, 106, 108, 110, 113, 114,116, 117, 120, 122, 123, 125, 126, 129, 131,132, 134
Collector Last Start 87, 88, 89, 91, 93, 94,96, 97, 100, 102, 106, 108, 110, 113, 114,116, 117, 120, 122, 123, 125, 126, 129, 131,132, 134
Collector Name 87, 88, 89, 91, 93, 94, 96,97, 100, 102, 106, 108, 110, 113, 114, 116,117, 120, 122, 123, 125, 126, 129, 131, 132,134
Collector Next Start 87, 88, 89, 91, 93, 94,96, 97, 100, 102, 106, 108, 110, 113, 114,116, 117, 120, 122, 123, 125, 126, 129, 131,132, 134
Collector Status 87, 88, 89, 91, 93, 94, 96,97, 100, 102, 106, 108, 110, 113, 114, 116,117, 120, 122, 123, 125, 126, 129, 131, 132,134
Command 91
Completion Status 110
Control 120, 123
Copyright 81
Density 114
Index 145
Version 2.8.01
Symantec NetBackup KM for PATROL
InfoBox
Description 88, 91, 94, 97, 102, 106, 114,120, 123, 126, 131, 132, 134
Device Host 120, 123
Disk Media ID 134
Disk Pool Name 134
Disk Type 134
Drive Index 120, 123
Duration 110
End 110
Exit Status 110
External Media ID 114
Files 110
Free Space 134
FS Percent Used 97
Group 126
Hardware 88, 106
High Watermark 132
Host Name 81, 126
Installation Path 81, 88
Job ID 110, 114
Job PID 110
Job Type 114
Keyword 102
Last Backup 94
Last Backup Duration 110
Last Backup End 102, 106, 110
Last Backup Files 110
Last Backup Job ID 94, 102, 106, 110
Last Backup Mode 94
Last Backup Size 110
Last Backup Start 102, 106, 110
Last Backup Status 102, 106
Last Full Backup End 102, 106
Last Full Backup Job ID 102, 106
Last Full Backup Start 102, 106
Last Incr Backup End 102
Last Incr Backup End Time 106
Last Incr Backup Job ID 102, 106
Last Incr Backup Start 102, 106
Last Purge 94, 97
Library Path 81
Log File Modification Time 97
Log File Size 97
Low Watermark 132
Master Server(s) 81
Max Jobs/Policy 102
Media ID 120, 123
Media Server 110, 114
Media Server(s) 81
Mode 114
Monitoring Mode 81
Monitoring Node 81
Multiple Data Stream 102
Name 88, 91, 94, 97, 102, 106, 120, 123,126, 132, 134
Node Name(s) 81
Node Type 81
Number of Read Mounts 134
Number of Write Mounts 134
Operating System 81, 88, 106
Operation 110
Owner 91, 110
Path 94, 97, 120, 123
PATROL Agent Version 81
Percent Completed 110
PID 91
Platform 81
Policy Name 106, 110, 114
Policy Type 110
PPID 91
Priority 102, 106, 110
Product Name 81
Product Release Date 81
Product Version 81
Raw Size 132
Recorded Media ID 114
Request ID 114, 120, 123
Request Time 114
Residence 102
Robot Drive Number 120
Robot Number 120
Robot Type 120
Schedule 110
Schedule End 110
Schedule Start 110
Schedule Type 110
Serial Number 120, 123
Size 110
Start 110
Status 88, 91, 102, 110, 120, 123
Storage Server 131, 132, 134
Storage Server Type 131, 132
Storage Unit 110, 114
Subtype 110
Support 81
Time Remaining 110
Total Capacity 134
Index 146
Version 2.8.01
Symantec NetBackup KM for PATROL
InfoBox
Total FS Space 97
Type 102, 110, 120, 123
Up/Down State 131, 132, 134
Usable Size 132
Used Percent 134
User 114, 120, 123, 126
Version 88
Volume Group 114
Volume Pool 102
Web Site 81Install / Un-install 21, 34
BMC Software Installation Utility 20
Log 22
Packages 21
Procedure 22
Setup Files 21Instance Limits
Check 46Integration
BMC ProactiveNet 49Integration Service Agent 49
Introduction 21
Issues
Fixed 8
- J -Job Alerts
Acknowledge 78Jobs
Configure 60
Monitoring Period 60
Status Configuration 63Jobs Erroneous Exit Status Filter
Configure 70
- K -Key Performance Indicators
BMC ProactiveNet Performance Management 51
Manage 51KM
Configure 44
Initial Setup 48
Load 40, 49
Preload 41
Preloaded 42, 43
Unload 42, 43
User Account 44KPI
BMC ProactiveNet Performance Management 51
Manage 51
- L -Linux 14
Load
KM 40, 49
PATROL Central 40Log Alerts
Acknowledge 78Log Error Filter
Configure 67Log Scan Limit
Configure 69Logs
Delete 58
Disable 58
Enable 58
- M -Manage
Baselines 51
Key Performance Indicators 51
KPI 51Managed Node
Status Configuration 63Master Server
Configure 56Master/Media Server
Start 53
Stop 54Media Server
Configure 56Menu Commands
About 81
Acknowledgement 97, 108, 110
Administration 81, 113, 114, 120
Alarms 97, 108
Alert 110
All 97, 108
Assign 114
Index 147
Version 2.8.01
Symantec NetBackup KM for PATROL
Menu Commands
Assign All 113
Client 88
Client Status 88
Clients 87
Clients Status 87
Configuration 87, 88, 89, 91, 93, 94, 96,97, 100, 102, 106, 108, 113, 117, 122, 123,125, 126, 129, 131, 132, 134
Daemon 91
Daemon List 89
Daemon Status 91
Daemons 89
Daemons Status 89
Database 94
Database Backup Information 93
Databases 93
Debug 81
Deny 114
Deny All 113
Disk Pool 132
Disk Pool Up/Down Status 132
Disk Pools 131
Disk Pools Up/Down Status 129, 131
Disk Volume 134
Disk Volume Up/Down Status 134
Disk Volumes 132
Disk Volumes Up/Down Status 129, 131,132
Drive Cleaning Statistics 116, 122, 123
Force Discovery 81
Force Full Collection 108
Instance Limits 81
Jobs 108
Jobs Alert Acknowledgement 108
Jobs Erroneous Exit Status 108
Jobs Status 108
KM Status 81
Log 97
Log Alert Acknowledgement 97
Log Filter 97
Log Scan Limit 97
Login 81
Logs 96
Logs Alert Acknowledgement 96
Logs Filter 96
Logs Scan Limit 96
Media List 126
Messages List 96
Monitoring Mode 81
Mount Request Date/Time Format 113
Mount Requests 113
Mount Requests Status 113
Node Status 81
Node Type 81
Offline Drive 120
Online Drive 120
Paths 81
Pending Requests 113
Policies 100
Policies Backup Restriction 100
Policies Status 100
Policy 102
Policy Backup Restriction 102
Policy Client 106
Policy Clients 102
Policy Schedule 102
Policy Status 102
Preloading 81
Refresh Parameters 81
Refresh Process Cache 81
Reload Commands 81
Reports 89, 93, 96, 102, 113, 116, 117,122, 123, 126
Resubmit 114
Resubmit All 113
Robotic Drive 120
Robotic Drive Status 120
Robotic Drives 117
Robotic Drives Status 116, 117
Robotic Libraries 116
Robotic Libraries Status 116
Robotic Library 117
Robotic Library Contents 117
Robotic Library Status 117
Standalone Drives 122, 123
Standalone Drives Status 122, 123
Start Master Server 81
Start Media Server 81
Stop Master Server 81
Stop Media Server 81
Storage 131
Storage Up/Down Status 131
Storages 129
Storages Up/Down Status 129
Volume Pool 126
Volume Pools 125
Warnings 97, 108
Index 148
Version 2.8.01
Symantec NetBackup KM for PATROL
Monitor Type 49
Monitored Mount Requests
Customize 66Monitoring Period
Configure 60
Jobs 60
Mount Requests 60Mount Request
Acknowledge 54Mount Request Date/Time Format
Customize 66Mount Request Status
Customize 66Mount Requests
Configure 60
Customize 66
Monitoring Period 60
Status Configuration 63Multi-Node Monitoring Mode
Configure 57
- N -NBU_CLIENT
Application Class 88NBU_CLIENT_CONTAINER
Application Class 87NBU_DAEMON
Application Class 91NBU_DAEMON_CONTAINER
Application Class 89NBU_DATABASE
Application Class 94NBU_DATABASE_CONTAINER
Application Class 93NBU_DEVICE
Application Class 123NBU_DEVICE_CONTAINER
Application Class 122NBU_DPOOL
Application Class 132NBU_DVOLUME
Application Class 134NBU_JOB
Application Class 110NBU_JOB_CONTAINER
Application Class 108NBU_LDEVICE
Application Class 120NBU_LIBRARY
Application Class 117NBU_LIBRARY_CONTAINER
Application Class 116NBU_LOG
Application Class 97NBU_LOG_CONTAINER
Application Class 96NBU_MOUNT
Application Class 114NBU_MOUNT_CONTAINER
Application Class 113NBU_PCLIENT
Application Class 106NBU_POLICY
Application Class 102NBU_POLICY_CONTAINER
Application Class 100NBU_POOL
Application Class 126NBU_POOL_CONTAINER
Application Class 125NBU_SERVER
Application Class 81NBU_STORAGE
Application Class 131NBU_STORAGE_CONTAINER
Application Class 129New features 8
Node Status
Configure 65Node Type
Configure 56
Master Server 56
Media Server 56
- O -Operating Systems
Linux 20, 21, 22, 34
Unix 20, 21, 34
Windows 20, 21, 22, 34Options
Common services 22
Console Systems role 22
Managed System 22
View Log 22
Index 149
Version 2.8.01
Symantec NetBackup KM for PATROL
Oracle Solaris Cluster 57
Overview 10
- P -Parameter
NBULoginStatus 44Parameters 80
ExtraFilesList 81
NBUClientCollector 81
NBUClientDetails 87
NBUClientState 88
NBUClientStatus 88
NBUClientSummary 88
NBUCreateDistribution 81
NBUDaemonCollector 81
NBUDaemonCPUDuration 91
NBUDaemonCPUUtilization 91
NBUDaemonDetails 89
NBUDaemonMemorySize 91
NBUDaemonProcessCount 91
NBUDaemonState 91
NBUDaemonStatus 91
NBUDaemonSummary 91
NBUDatabaseBackupElapsed 94
NBUDatabaseCollector 81
NBUDatabaseDetails 93
NBUDatabaseFSSpaceUsedPercent 94
NBUDatabaseSpaceAvailable 94
NBUDatabaseSpaceGrowthRate 94
NBUDatabaseSpaceUsed 94
NBUDatabaseSpaceUsedPercent 94
NBUDatabaseSummary 94
NBUDPoolSummary 132
NBUDPoolUpDownState 132
NBUDPoolUpDownStatus 132
NBUDPoolVolumeCount 132
NBUDriveCollector 81
NBUDriveDetails 122
NBUDriveState 123
NBUDriveStatus 123
NBUDriveSummary 123
NBUDriveThroughput 123
NBUDVolumeReadStreamCount 134
NBUDVolumeSpaceAvailable 134
NBUDVolumeSpaceGrowthRate 134
NBUDVolumeSpaceUsed 134
NBUDVolumeSpaceUsedPercent 134
NBUDVolumeSummary 134
NBUDVolumeUpDownState 134
NBUDVolumeUpDownStatus 134
NBUDVolumeWriteStreamCount 134
NBUFileExcludeList 106
NBUFileIncludeList 106
NBUJobActiveBackupCount 108
NBUJobActiveCount 108
NBUJobActiveNonBackupCount 108
NBUJobCollector 81
NBUJobDetails 108
NBUJobDuration 110
NBUJobFileCount 110
NBUJobSize 110
NBUJobState 110
NBUJobStatus 110
NBUJobSummary 110
NBUJobText 110
NBUJobThroughput 110
NBULibraryCollector 81
NBULibraryDetails 116
NBULibraryMediaAssignedCount 117
NBULibraryMediaAvailableCount 117
NBULibraryMediaAvailablePercent 117
NBULibraryMediaCleaningLeft 117
NBULibraryMediaCount 117
NBULibraryMediaScratchCount 117
NBULibraryMediaScratchPercent 117
NBULibraryMediaUnassignedCount 117
NBULibraryMediaUnassignedPercent 117
NBULibraryState 117
NBULibraryStatus 117
NBULibrarySummary 117
NBULibraryThroughput 117
NBULibraryUpDriveCount 117
NBULogAlarmCount 97
NBULogAlarmText 97
NBULogCollector 81
NBULogDetails 96
NBULogFSSpaceUsedPercent 97
NBULoginStatus 81
NBULogSpaceAvailable 97
NBULogSpaceGrowthRate 97
NBULogSpaceUsed 97
NBULogSpaceUsedPercent 97
NBULogSummary 97
NBULogText 97
NBULogWarningCount 97
NBULogWarningText 97
Index 150
Version 2.8.01
Symantec NetBackup KM for PATROL
Parameters 80
NBUMediaActiveCount 126
NBUMediaActivePercent 126
NBUMediaCount 126
NBUMediaEmptyCount 126
NBUMediaFrozenCount 126
NBUMediaFullCount 126
NBUMediaFullPercent 126
NBUMediaLoadedCount 126
NBUMediaReadOnlyCount 126
NBUMediaScratchCount 126
NBUMediaSuspendedCount 126
NBUMediaUnassignedCount 126
NBUMediaUnassignedPercent 126
NBUMediaUnknownCount 126
NBUMonitoringMode 81
NBUNodeStatus 81
NBUPClientBackupSummary 106
NBUPClientBackupThroughput 106
NBUPClientFullBackupDuration 106
NBUPClientFullBackupFileCount 106
NBUPClientFullBackupSize 106
NBUPClientIncrBackupDuration 106
NBUPClientIncrBackupFileCount 106
NBUPClientIncrBackupSize 106
NBUPClientSummary 106
NBUPolicyBackupElapsed 102
NBUPolicyBackupSummary 102
NBUPolicyBackupThroughput 102
NBUPolicyCollector 81
NBUPolicyDetails 100
NBUPolicyFullBackupDuration 102
NBUPolicyFullBackupElapsed 102
NBUPolicyFullBackupFileCount 102
NBUPolicyFullBackupSize 102
NBUPolicyIncrBackupDuration 102
NBUPolicyIncrBackupElapsed 102
NBUPolicyIncrBackupFileCoun 102
NBUPolicyIncrBackupSize 102
NBUPolicyState 102
NBUPolicyStatus 102
NBUPolicySuccBackupElapsed 102
NBUPolicySummary 102
NBUPoolCollector 81
NBUPoolDetails 125
NBUPoolSpaceAvailable 126
NBUPoolSpaceGrowthRate 126
NBUPoolSpaceUsed 126
NBUPoolSpaceUsedPercent 126
NBUPoolSummary 126
NBURDriveState 120
NBURDriveStatus 120
NBURDriveSummary 120
NBURDriveThroughput 120
NBURequestCollector 81
NBURequestDetails 113
NBURequestElapsed 114
NBURequestState 114
NBURequestStatus 114
NBURequestSummary 114
NBUStorageCollector 81
NBUStorageDetails 129
NBUStorageSummary 131
NBUStorageUpDownState 131
NBUStorageUpDownStatus 131
NBUUpdateAgent 81
Refresh 73Paths
Binary 56
Configure 56
Debug Directory 56
Home Directory 56
Library 56
Netbackup Installation 56
NetBackup Log Directory 56
Temp Directory 56PATROL
Agent 44
PATROL Agent 42
PATROL Agent system 19
PATROL Central Console 42, 43
PATROL Central Console Server system 19
PATROL Central Web Server system 19
PATROL Console 42, 43
PATROL Console system 19PATROL Agent
Configure 41
Restart 48PATROL Console 40
Restart 48Permissions
Access 14Platform
Upgrade 39Platforms
Unix 44Policies
Delete 58
Index 151
Version 2.8.01
Symantec NetBackup KM for PATROL
Policies
Disable 58
Enable 58Policy Backup Restriction
Configure 71Policy Clients
Delete 58
Disable 58
Enable 58Preload
KM 41Preloaded
KM 42, 43Prepare
Debug Files 75ProactiveNet 49
PW Commands 50
- R -Refresh
Parameters 73Release Notes 8
Reload
Commands 74remote PATROL Agent Checking 57
Requirements
Additional 12
BMC ProactiveNet Performance ManagementPortal 12
BMC Software PATROL Agent 12
BMC Software PATROL Console 12
Disk Space 19
Security 14
Software 12
Symantec NetBackup™ 12
System 11Restart
PATROL Agent 48
PATROL Console 48Robotic Drives
Administration 55
Delete 58
Disable 58
Enable 58
Status Configuration 63Robotic Libraries
Delete 58
Disable 58
Enable 58
Status Configuration 63
- S -Security
Requirements 14Setup
Check 48
Initial 48
KM 48Solaris 14
Standalone Drives
Administration 55
Delete 58
Disable 58
Enable 58
Status Configuration 63Start
Master/Media Server 53Status Configuration
Clients 63
Daemons 63
Jobs 63
Managed Node 63
Mount Requests 63
Robotic Drives 63
Robotic Libraries 63
Standalone Drives 63Stop
Master/Media Server 54Storages
Delete 58
Disable 58
Enable 58Sudo 44
User 14Support
Customer Support 140
Email 140
Technical 140
Telephone 140
Web Site 140Symantec NetBackup
Administer 53System
HP-UX 11
Index 152
Version 2.8.01
Symantec NetBackup KM for PATROL
System
IBM AIX 11
Microsoft Windows 11
Oracle Solaris 11
Red Hat Linux 11
Requirements 11
- T -Thresholds
Customize 50
Import 50Troubleshooting 136
- U -Unix 44
Unload
KM 42, 43Upgrade
Platform 39
- V -Verify
Application Discovery 46Veritas Cluster File System 57
Veritas Cluster Server 57
Volume Pools
Delete 58
Disable 58
Enable 58
- W -Warning
Acknowledge 78Warning Filter State Rules 63
What's new 8
About BMC® SoftwareBMC Software, Inc. NYSE:BMC, is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective. Delivering Business Service Management, BMC Softwaresolutions span enterprise systems, applications, databases, and servicemanagement. Founded in 1980, BMC Software has offices worldwide and fiscal2004 revenues of more than $1.4 billion. For more information about BMC
Software, visit www.bmc.com.
About Sentry Software™Sentry Software, a strategic Technology Alliance Partner of BMC Software,provides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager, thus enabling up to 100% coverage ofany infrastructure. Sentry Software specializes in single solutions for multi-platform monitoring of hardware, custom applications or any IT component, andblackout windows. Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Software’s third-party product sales. For more
information about Sentry Software, please visit www.sentrysoftware.net.
223453