SWS 2020 SALE April-Septembersilverwaterwelding.com.au/wp-content/uploads/2020/05/SWS... ·...
Transcript of SWS 2020 SALE April-Septembersilverwaterwelding.com.au/wp-content/uploads/2020/05/SWS... ·...
37-39 Newton Street North, SILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
SWS 2020 SALEAPRIL - SEPTEMBER 2020
SWS March 2020 Sale Catalogue.indd 1SWS March 2020 Sale Catalogue.indd 1 18/3/20 10:12 am18/3/20 10:12 am
Package includes 2-roll drive machine, 2-roll idler wheels, and foot control
PROFAX USATURNING ROLL(909kg/2000lbs)
CODE:
TR2000-2
$2,886INCL GST
FEATURES
• 340mm Diameter Table• 0 to 5.5 rpm rotation speed• Manual Tilt Adjustment• 240 Volt• 0-90° Tilting Angle• High Frequency Protected• Standard with Foot Control• Shipping Weight 51 kgs• Designed for rotation of lighter pieces. • Will hold 200kgs in the horizontal position and 113kgs in the vertical
position
Note: C/G of load not to be more than 100mm from the centre of the turntable and 100mm from the face of the turntable.
PROFAX USAWELDING POSITIONER
CODE:
WP250-2
$2,760INCL GST
Includes machine and foot control
FEATURES
• 37.5 mm to 400 mm diameter• 0 to 1.9 metres per minute rotation
speed• 240 Volt• High Frequency Protected• Standard with Foot Control with 3.6 m cord• Adjustable Drive Tension• Shipping Weight 66 kgs• 50 mm x 250 mm Rubber Wheels (2” x 10”)• Maximum load capacity 909kg (2000lbs).• 454 kgs (1000 lbs) for each of the drive and idler.
Note: Additional Idler Rolls available. Part number: IR750.
PROFAX TURNING ROLL & WELDING POSITIONER
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.2
SWS March 2020 Sale Catalogue.indd 2SWS March 2020 Sale Catalogue.indd 2 18/3/20 10:12 am18/3/20 10:12 am
• Slim, super light, low profile helmet - just 485grams
• New True-View technology for colour and contrast
• Large 55 x 107mm viewing area
• TST (TIG Sensor Technology) reacts down to 1amp
• Viewing area 44 x 93mm
• New smooth ratchet head harness
• New delay setting (set your dark to light return time)
• TST (TIG Sensor Technology) reacts down to 10 amps
• 6 graphic options to choose from
3M™ Speedglas™ 9100XXi
• Flip-up mechanism reveals a clear grinding visor
• New Speedglas True-View for colour and contrast
• Extra-large viewing area 73 x 107mm
• Peripheral SideWindows for enhanced vision
• Aerodynamic exhaust vents remove exhaled air
• External button for grind and memory modes
• New Speedglas True-View for colour and contrast
• Extra-large viewing area 73 x 107mm
• Peripheral SideWindows for enhanced vision
• Aerodynamic exhaust vents remove exhaled air
Part no. 501826
Ejendals TEGERA 126A TIG Gloves Jalas Titan Welding Boots
• Must try dexterity and fingertipsensitivity
• Legendary Tegera resting-fit
• Industry’s best quality, verticallycut, full-grain goatskin
• Available in sizes 7-11
• Highest level of protection
• Aluminium toecap with toereinforcement
• Velcro fastening for quick release
• No weld slag collection areas
• Available in sizes 39-48
Part no. T-126A Part no. T-1848K
Ninja Ice Hot Motor
3M™ Speedglas™ 9100XXi FXPart no. 541826
3M™ Speedglas™ 9002NCPart no. 401385
3M™ Speedglas™ 100V SeriesPart no. 751120 - Ninja, 752520 - Ice Hot, 752920 - Motor
CODE:501826
$539INCL GST
CODE:541826
$715INCL GST
CODE:401385
$372.90INCL GST
CODE:751120
$260INCL GST
CODE:T126A-10
$22INCL GST
CODE:T1848K-42
$242INCL GST
CODE: 752520 & 752920
$299INCL GST
SPEEDGLAS™
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
SWS March 2020 Sale Catalogue.indd 3SWS March 2020 Sale Catalogue.indd 3 18/3/20 10:12 am18/3/20 10:12 am
PROMIG / CIGWELD
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.
PlatecutterTorch designed to suit Comet Type 41 and 44 High Speed Cutting Nozzles Cutting speed up to 1500mm/minute (ideal for Cutmaster SL100 Automated Plasma Torch)
3 simple functions: - On/Off- Direction- SpeedComes complete with 3.6 metres of track and 1 x COMET Size 8 Type 41 High Speed Cutting NozzleErgonomic carry handle
Various optional accessories, including: - Gas Torch to suit COMET 3 Seat Cutting Nozzles (#338558)- Torch Holder for Cutmaster SL100 Automated Plasma Torch (#338550)
Part Number
Description
338610 COMET Plate Cutter
CODE:338610
$880INCL GST
Silverwater Welding Supplies has been importing PROMIG GOLD ER70-S6 Welding Wire for over 20 years. The wire has a reputation for quality and consistency.
PHONE TODAY FOR
GUARANTEED
COMPETITIVE
PRICING!
4
SWS March 2020 Sale Catalogue.indd 4SWS March 2020 Sale Catalogue.indd 4 18/3/20 10:12 am18/3/20 10:12 am
LINCOLN ELECTRIC
THE POWER FOR TWOBuilt for the construction site, pipeline and hire fleet. The Dual Maverick® 450 is two complete welders in one. The design features the 26.4 HP @ 3000 RPM Perkins 403D-11 Tier 4i water cooled diesel engine. That is enough power for two operators to weld at the same time, or for one operator to gouge with up to a 8 mm carbon.
DUAL MAVERICK 450ENGINE DRIVEN WELDER
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
CODE:
K4381-1
$30,800INCL GST
• Only one machine to service and maintain instead of two.
• New sound reduction techniques have lowered noise levels substantially
• from earlier models.• Engine RPM varies based on the welding output
required, resulting in less fuel being used and less noise – 71.6dBA (4m) and 66.6dBA (7m with full welding load). Complies to AS1674.2 Cat: C)
• Auto Stop-Start function will stop the engine after a user defined period of no welding activity. Start welding again simply by touching the electrode to the work.
• Maintenance reminders assist with maximising engine life and reliability.
• VRD for both operators to enhance their safety.
SWS March 2020 Sale Catalogue.indd 5SWS March 2020 Sale Catalogue.indd 5 18/3/20 10:12 am18/3/20 10:12 am
DURALLOY® ELECTRODE OVEN• 240V• 5kg
(Option for pipe stand)
DURALLOY® FOLD-A-JACK STEEL STAINLESS STEEL ROLLER SET
DURALLOY® MAGNETIC TORCH STAND - MIG
DURALLOY® MAGNETIC TORCH STAND - TIG
DURALLOY® FOLD-A-JACK WITH V HEAD
(Option for pipe stand)
DURALLOY® FOLD-A-JACK STEEL ROLLER HEAD
DURALLOY® 4M ELECTRODE HOLDER CABLE SET WITH 35-50 MALE CONNECTOR
DURALLOY® 4M EARTH CLAMP CABLE SET WITH 35-50 MALE CONNECTOR
CODE:DA1284
$49.50INCL GST
CODE:DA1285
$59.40INCL GST
CODE:DASRH
$159INCL GST
CODE:DA781303
$99INCL GST
CODE:DA781135KG
$176INCL GST
CODE:DAMAGMIC
$20CODE:YCH5
$132INCL GST
CODE:DAMAGTIG
$20INCL GSTINCL GST
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.6
ACCESSORIES
SWS March 2020 Sale Catalogue.indd 6SWS March 2020 Sale Catalogue.indd 6 18/3/20 10:12 am18/3/20 10:12 am
IOxygen GAS WELDING & CUTTING TOOLBOX KITKit includes:• Tool box• Oxy regulator• Acet regulator• Blowpipe• Cutting attachment• Mixer• Cutting tips 8/12/15• Welding tips 8/12/20• 10mtr twin hose• Flint gun• Tip cleaners• Oxy goggles• 2 x flashbacks (Reg end)• 2 x flashbacks (torch end)
GAS WELDING & CUTTING EQUIPMENT
IOxygen OXY/LPG 5mm ID HOSE
IOxygen OXY/ACET 5mm ID HOSE
IOxygen CUTTING TIP - ACET
CODE:IO41
$12INCL GST
CODE:IO44
$15INCL GST
IOxygen CUTTING TIP - LPG
IOxygen BLOWPIPE
IOxygen CUTTING ATTACMENT
CODE:MG-241
$132INCL GST
CODE:MG-242
$121INCL GST
Available in 5m, 10m, 15m & 20m.
$42INCL GST
5 metre from
Available in 5m, 10m, 15m & 20m.
CODE CUTTING CAPACITYIO41-6 1-6mmIO41-8 6-10mmIO41-12 12-20mmIO41-15 25-75mmIO41-20 100-125mm
CODE CUTTING CAPACITYIO44-6 1-6mmIO448 6-10mmIO44-12 12-20mmIO44-15 25-75mmIO44-20 100-125mm
CODE:GCW-24TB
$495INCL GST
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
$35INCL GST
5 metre from
SWS March 2020 Sale Catalogue.indd 7SWS March 2020 Sale Catalogue.indd 7 18/3/20 10:12 am18/3/20 10:12 am
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.8
CIGWELD TRANSMIG 185 ULTRA
CODE:W1006185
$1577.80 INCL GST
SWS March 2020 Sale Catalogue.indd 8SWS March 2020 Sale Catalogue.indd 8 18/3/20 10:12 am18/3/20 10:12 am
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
INVERTER WELDERS
MULTIMIG 500415V Multiprocess Inverter Welding Machine
CODE:
DA500MMIG
$4,125INCL GST
PACKAGE INCLUDES Power Source, 4-Roll Drive Feeder, 3m Earth Lead, 3m MMA Arc Lead, 10m Interconnection Kit, Argon Regulator, Owner’s Manual , 0.9-1.2V Rollers
• High performance industrial 500A multiprocess welder Heavy duty 4-roll geared drive feed system
• MIG, TIG, MMA & Arc Air Gouging compatible • Built-in toolbox trolley• Voltage Reduction Device (VRD) • Industrial cable connectors (35-50)• Industrial castors on power source and wirefeed• Protective front fascia cover on power source and wire feeder• 32 Amp primary plug fitted• IP21S Rating• Water-cooled model available
201P AC/DC PULSE TIG240V AC/DC TIG Inverter Welding Machine
CODE:
DA201PACDC
$1,320INCL GST
PACKAGE INCLUDES 4m Switched 17 Tig Torch, Earth Lead & Clamp, Gas Hose, Argon Regulator, Owners Manual WARRANTY
• Digital display• Pulse function• AC balance control• 4m WP17 TIG Torch with accessories• AC/DC Technology• Adjustable pulse parameters• Adjustable Pre/Post Gas• Foot Control (Optional)• Generator Friendly (10Kva)• Industrial Cable Connectors (35-50)• Quick Connect Gas Fitting• 240V 15A• Protective Front Fascia cover• IP23 Rating
SWS March 2020 Sale Catalogue.indd 9SWS March 2020 Sale Catalogue.indd 9 18/3/20 10:12 am18/3/20 10:12 am
8
3
4
52
1
79
10
6
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.10
1-13mm Chuck(includes key)
NEW ERGONOMICALLY DESIGNED MACHINE WITH OUTSTANDING PERFORMANCE FOR THE PROFESSIONAL
Tilt protection for motor air inlet to avoid liquid and debris falling into the motor.
Two way adjustable slide rails which allows adjustment to suit different requirements Maximum stroke to 210mm. Rail positioning function which allows motor to stop at any position to prevent self-rig decline and avoid cutter damage.
Internal self-lubricating function to ensure longer gear life.
Automatic cooling system with external cooling ring design to prevent liquid overflow into the gearbox.
Ergonomically designed handle, designed to unscrew for storage.
Comfort Grip handle.
Lifting Holes and insurance rope holes guarantees double protection when unit is being used out of position.
Tilt body design ensures rigidity and improved drilling accuracy.
Magnetic adhesion protection ensures that the motor does not start on nonmagnetic or low adhesion materials.
Magnetic base with dual magnets ensures maximum adhesion of 10000N.
1
2
3
4
5
6
7
8
9
10
LX-35 MAGNETIC DRILL
CODE: LX-35
$990INCL GST
CODE: LCHUCK
$66INCL GST
SWS March 2020 Sale Catalogue.indd 10SWS March 2020 Sale Catalogue.indd 10 18/3/20 10:12 am18/3/20 10:12 am
LOCH® INOX CUTTING & GRINDING DISCS• INOX, iron free cutting wheel• Industrial quality and performance• For use with mild steel or stainless steel• Well balanced, giving you a great cut
and a long service life
PART NO SIZE QTYL100G60 100 x 6.0mm Box 25 / Carton 200
L125G60 125 x 6.0mm Box 25 / Carton 100
L230G60 230 x 6.0mm Box 15 / Carton 30
GRINDING
PART NO SIZE QTYL100C10 100 x 1.0mm Box 100 / Carton 800
L100C25 100 x 2.5mm Box 50 / Carton 400
L115C10 115 x 1.0mm Box 100 / Carton 400
L125C10 125 x 1.0mm Box 100 / Carton 400
L125C25 125 x 2.5mm Box 50 / Carton 200
L230C25 230 x 2.5mm Box 25 / Carton 50
CUTTING
LOCH® 125MM ZIRCONIUM FLAP DISC• 40, 60, 80 & 120 Grit available• Industrial quality and performance• For use with mild steel or stainless steel• 125 x 22.2mmPART NO SIZE QTYL125F40 40 Grit 125 x 22.2mm Packet 10 / Box 200
L125F60 60 Grit 125 x 22.2mm Packet 10 / Box 200
L125F80 80 Grit 125 x 22.2mm Packet 10 / Box 200
L125F120 120 Grit 125 x 22.2mm Packet 10 / Box 200
LOCH® 100MM ZIRCONIUM FLAP DISC• 40, 60, 80 & 120 Grit available• Industrial quality and performance• For use with mild steel or stainless steel• 100 x 16mmPART NO SIZE QTYL100F40 40 Grit 100 x 16mm Packet 10 / Box 200
L100F60 60 Grit 100 x 16mm Packet 10 / Box 200
L100F80 80 Grit 100 x 16mm Packet 10 / Box 200
L100F120 120 Grit 100 x 16mm Packet 10 / Box 200
LONGER CUT LIFE
Testing in the USA showsLOCH will give you 30% more cuts
We stock 4, 5, 7 & 9 inch sizes
CALL TODAY FOR A FREE SAMPLE!
CODE: L125C10125 x 1.0mm
Cutting Wheel from
(Carton of 400)
$1.10ea
ABRASIVES
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
SWS March 2020 Sale Catalogue.indd 11SWS March 2020 Sale Catalogue.indd 11 18/3/20 10:12 am18/3/20 10:12 am
ABRASIVES
75MM CRIMPED WIRE CUP BRUSH
Quick-change multi-thread M14/M10
75MM TWISTKNOT CUP BRUSH
Quick-change multi-thread M14/M10
75MM STAINLESS STEEL TWISTKNOT CUP BRUSH
Quick-change multi-thread M14/M10
100MM TWISTKNOT CUP BRUSHQuick-change multi-thread M14/M10
100MM STAINLESS STEEL TWISTKNOT CUP BRUSHQuick-change multi-thread M14/M10
100MM TWISTKNOT BEVEL BRUSHQuick-change multi-thread M14/M10
CODE:L1010
$19.80INCL GST
CODE:L1008SS
$18.70INCL GST
CODE:L1008
$12.10INCL GST
CODE:L1002
$7.70INCL GST
CODE:L1030
$15.40INCL GST
CODE:L1010SS
$33INCL GST
ABRASIVES
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.12
SWS March 2020 Sale Catalogue.indd 12SWS March 2020 Sale Catalogue.indd 12 18/3/20 10:12 am18/3/20 10:12 am
Weldmatic 350iCP139-1 [Includes W66 Wirefeeder and Trolley]
Industrial three phase, 350 Amp multi-process welder capable of handling MIG, Stick, Arc Air Gouging & TIG Lift Arc processes.
Ideal choice for medium to heavy industrial fabrication.
Built in operator safety.
Variable arc control.
Weldmatic 500iCP140-1 [Includes W65 Wirefeeder and Trolley]
Industrial three phase, 500 Amp multi-process welder capable of handling MIG, Stick, Arc Air Gouging & TIG Lift Arc processes.
Ideal choice for medium to heavy industrial fabrication.
Built in operator safety.
Variable arc control.
Weldmatic FabricatorCP135-1 [Includes W64 Wirefeeder]
Ideal for vehicle manufacture, ship building, aluminium & stainless steel construction & the full range of steel fabrication.
Runs all popular sizes of solid & flux-cored wires.
Digital Amp & volt meters for precise set-up.
High Performing Welding Solutions
Austarc 16TC16TC25 (2.5mm), 16TC32 (3.2mm), 16TC40 (4.0mm)
A smooth running, basic low hydrogen electrode.
Exceptional arc stability & weld ability.
For all positional (except vertical down).
For pipe welding, single sided weld joints & maintenance applications.
ALL WIA 3 PHASE MACHINES COME WITH A 3 YEAR WARRANTY
THE CHOICE OF PROFESSIONAL WELDERS
WIA WELDERS & ELECTRODES
CODE:CP135-1
$5,445INCL GST
CODE:CP139-1
$3,245INCL GST
CODE:CP140-1
$3,740INCL GST
CODE:16TC32
POA
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
SWS March 2020 Sale Catalogue.indd 13SWS March 2020 Sale Catalogue.indd 13 18/3/20 10:12 am18/3/20 10:12 am
Pilot Tough Deals.
K25/21 • 454 L/Min (16 CFM) free air delivery (measured to
AS4637)• 1,100 kPa (160 PSI) maximum cut out pressure• Twin cylinder, two stage compressor pump, made in Italy• 4kw, 415V, three phase, MEPS approved electric motor• 150 litre air receiver (to AS1210)
K17PUTE • 308 L/Min (10.9 CFM) free air delivery
(measured to AS4637)• 1,000 kPa (145 PSI) maximum cut out pressure• Twin cylinder compressor pump, made in Italy• HONDA recoil start GX160 petrol engine• 45 litre air receiver (to AS1210)• Specially designed to fit in Utes
Pilot Air Compressors, family owned and proudly Australian.*Hurry, offer is only available until 30/04/2020. All prices Include GST. Available whilst stocks last. Conditions Apply.
$2830.30 INCL GST
$3,151.50 INCL GST
ALL PRICES INCLUDE GST UNLESS EX GST IS SPECIFIED. Whilst due care has been taken in the preparation of this document. Silverwater Welding Supplies shall not be liable for any inaccuracies or omissions which may occur herein.
Silverwater Welding Supplies reserves the right to change product or service specifications without notice. All pictures are for illustrative purposes only.14
PILOT AIR COMPRESSORS
SWS March 2020 Sale Catalogue.indd 14SWS March 2020 Sale Catalogue.indd 14 18/3/20 10:12 am18/3/20 10:12 am
WHALESPRAY
WhaleSpray is committed to quality, performance and the environment in the same way, that is why all WhaleSpray products are optimal both in terms
of application and operation, and in reducing the environment impact.
PRODUCT OF SPAIN
CRACK TEST 1, 2 & 3Crack 1 Red Penetrating Liquid
• For NDT tests Inspection of welds, castings, forges • Removable with water and solvents• Excellent penetration by capillarity• Defects will appear in red
Crack 2 White Revealer Liquid
• Special for NDT tests Inspection of welds, castings, forges• Removable with water and solvents• Very fast special drying formula, reveals defects on the surface
Crack 3 Penetrating Liquid Eliminator
• High cleaning power and quick drying• Leaves no residue, no stain or corrosion• 360° valve• 97% active product
MASK CLEANER• Special spray for cleaning and main-
tenance of welding masks
• Great lens cleaner
ANTISPATTERNon Flammable Antispatter• A quick, easy and safe way to prevent the
adherence of spatters on any metal surface • Biodegradable, compatible with painting processes • Welding without pores • 0% harmful effects• Excellent on all types of surfaces including
galvanized surfaces
Ceramic Antispatter• 100% ceramic protects treated surfaces up to 8
hrs• Resistance to temperatures above 1400°C• Protect surfaces, positioners, parts, nozzles in
welding processes: MIG, MAG, laser and plasma cutting
Non Flammable Ceramic Antispatter Crack 1
NEW PRODUCT
RANGE
Crack 2 Crack 3
CODE:WSMASKC
$16.50INCL GST
CODE:WS3050S
$22INCL GST
CODE:WS1821S
$22INCL GST
CODE:WS1820S
$22INCL GST
CODE:WS1805S
$33INCL GST
CODE:WS1801S
$9.24INCL GST
37-39 Newton Street NorthSILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
SWS March 2020 Sale Catalogue.indd 15SWS March 2020 Sale Catalogue.indd 15 18/3/20 10:12 am18/3/20 10:12 am
37-39 Newton Street North, SILVERWATER NSW 2128
TF
(02) 9748 1868(02) 9647 1645
E W
We service and repair all types of welding equipment and machinery, including MIG's, TIG's, Plasma Cutters and engine-driven petrol/diesel welders. Some brands include:
WELDER SERVICE& REPAIRS
SWS March 2020 Sale Catalogue.indd 16SWS March 2020 Sale Catalogue.indd 16 18/3/20 10:12 am18/3/20 10:12 am