EN50155, IP60 POE Hardened Switch Vers ion 1 .3 – Dec 2015

SWMPSWMPSWMP---HRHRHR---8TPM8TPM8TPM---2GM2GM2GM SWMPSWMPSWMP---HRHRHR---8TPM8TPM8TPM---2GSM2GSM2GSM SWMPSWMPSWMP---HRHRHR---8TPM8TPM8TPM---2GL202GL202GL20

ETHERNET SWITCH FOR ROLLING STOCK MATERIAL

Features

• Hardened Ethernet Manage-

able Layer2 , IP60 grade

• Compliant for Railway Rolling

stock equipment EN50155, EN50121-3-2 and railway station EN50121-4

• Panel fixing

Models

• SWMP-HR-8TPM-2GM

8 FE PoE source 802.3af at 30W max, and 2 uplink GE

• SWMP-HR-8TPM-2GSM

SWMP-H67-8TPM-2GL10 8 FE PoE source 802.3at 30W max, and 2 optical GSX MM or GLX SM10 or 20km LC

• M12 waterproof connectors

for copper FE/GE and LC fiber for GSX/GLX

Ethernet supports:

• α-ring and RSTP/MSTP for

Ethernet ring redundancy, with dual homing

• Port-base VLAN, 802.1q

VLAN Tagging and GVRP

• IP multicast filtering through

IGMP Snooping V1, V2, V3

• IEEE802.1p QoS with four

priority queues

• MAC-based trunking, LACP

• IEEE802.1x port-security

• Bandwidth rate control

• Port-lock for authorized MAC

address access only Management • Over console, Telnet, SSH,

CLI http, https, SNMP v1, v2c &v3, RMON and TFTP

• Port mirroring

• -40°C to 75°C operating tem-

perature range

The IP60 grade SWMP-HR-8TPM-2G manageable Ethernet switch is used in railway or industries with very hardened environment. Thanks to strong concept and M12/M23 connectors they are working in railway rolling stock material according to EN50155, EN50121-3-2 compliances or railway substation EN50121-4.

The switch supports 8 ports 10/100BaseT with PoE Power Sourcing Equipment (PSE) IEEE 802.3at up to 30W per port and 2 uplink Giga copper or fiber. .

locking or the 24 static addresses per port set-up.

The SWMP-HR switches support a lot of protocols for QoS, VLAN per port or IEEE802.1Q VLAN Tagging with GVRP setup and video traffic optimization such as IGMP snooping v1, v2 and V3. Each port can be assigned a four level priority queuing policy and a rate limiting.

This switch support MAC-based trunking and LACP.

This switch is manageable trough in http or https, in telnet with SSH or the consol port with CLI command or in SNMP v1/2c/3 and TFTP. It’s pro-vide with an RMON probe interface and port mirroring to facilitate the deployment.

This switch are build in strong metal case with full protection for durst.

Its operating temperature covers the range of –40 to 75°C, -40 to 167°F. All devices are tested in production at 85°C during 72h.

Thanks to his hardware and mechanical design for EMI/EMS, chock and vibra-tion resistant, this switch is design to comply with railway/metro station ac-cording to EN50121-4 but also in roll-ing stock material in compliance with EN50155 and EN50121-3-2. It is pro-vide with panel mount kit.

The model provide 8 POE sources ports according to IEEE802.3at and supply up to 30W per port. The PoE level is controlled and scheduling along the week.

This Layer 2 manageable Ethernet switch supports all Ethernet feature of the CXR industrial and hardened switch ranges for secure, QoS and powerful switching.

The SWMP-HR-supports the STP/RTSP/MSTP and the α-ring Ethernet redun-dancy. The α-ring provide very fast re-covery delay over Ring topologies, bel-low 15 ms based on .Layer1 over cop-per or fiber ports. Dual homing α-ring and RSTP/MSTP protocols are running in the same switch.

Secure access is provided by the Ra-dius authenticate 802.1x but also the Per-port programmable MAC address

Railway rolling stock

Metro / Underground rolling stock

Railway/tramway station

Bus for camera support

POE Wireless Access Point and camera

Industrial environment

APPLICATIONS

SWMP-HR-8TPM-2GM/GSM/GL

Page 2 Vers ion 1 .3 – Dec 2015

SOFTWARE FEATURE Management • Interface

◦◦ CLI, Telnet and Web Browser

◦◦ SNMP v1/v2c/v3

• Firmware and configuration upgrade and backup via TFTP

• Supports DHCP Server/Client

• RMON (Remote monitoring): group 1, 2, 3, 9

• Port mirroring: TX/RX and both

• NTP (Network Time Protocol) time synchronization

• IEEE802.1ab LLDP (Link Layer Discovery Protocol)

Security • MAC address filtering

• Enable/disable port

• Storm control (broadcast and multicast types)

• IEEE802.1x LAN access control

• Remote authentication through RADIUS

• SSH for CLI and Telnet security

• SSL for web security

• Multi-level user account/password against unauthorized configuration

Quality of Service (QoS) • Priority Queues: 4 queues per port

• Traffic classification based on IEEE802.1p CoS, DSCP, WRR (Weighted round robin)

and strict mode

• Rate Limiting (Ingress/Egress)

Layer 2 Features • Auto-negotiation for port speed and duplex mode

• Flow Control

◦◦ IEEE802.3x full duplex mode

◦◦ Back-Pressure half duplex mode

• Redundant Protocol

◦◦ IEEE802.1D Spanning Tree Protocol (STP)

◦◦ IEEE802.1w Rapid Spanning Tree Protocol (RSTP)

◦◦ IEEE802.1s Multiple Spanning Tree Protocol (MSTP)

◦◦ α-Ring network, ring protection, fault recovery (<15ms) and α-Chain

• VLANs

◦◦ Port-based VLANs

◦◦ IEEE802.1Q Tag VLANs (128 groups, 4096 VID)

◦◦ GVRP (GARP VLAN Registration Protocol)

◦◦ GMRP (GARP Multicast Registration Protocol)

• Link Aggregation

◦◦ Static Trunk (2 groups, support MAC base)

◦◦ IEEE802.3ad Link Aggregation Control Protocol

• IGMP Snooping

◦◦ IGMP snooping v1/v2/v3

Performance • Switching Capability: 5.6 Gbps

• Packet Buffer Size: 2M bits

• MAC Address Table: 8K The information contained in this document are provided without warranty and do not constitute a contractual document. In order to improve its products, CXR re-serves its right to modify, without notice, any part of this docu-ment and the specification it contains.

SWMP-HR-8TPM-2GM

Hardened Layer 2 Ethernet switch , IP60 case, 8 10/100Baset POE 802.3at port and 2 uplink ports 10/100/1000BaseT with M12 connectors, VLAN tagging 802.1q,QoS 802.1p, port trunking, RSTP, Alfa-Ring <15ms, SNMP V3, 22 to 57Vdc power supply, working temperature -40 à +75°C , EN50121-3-2, EN50121-4 and EN50155 (rolling stock railway)

SWMP-HR-8TPM-2GSM

Hardened Layer 2 Ethernet switch , IP60 case, 8 10/100Baset POE 802.3at ports, and 2 uplink 1000SX MM 850nm 550m , with LC M12 connectors, VLAN tagging 802.1q,QoS 802.1p, port trunking, RSTP, Alfa-Ring <15ms, SNMP V3, 22 to 57Vdc power supply, working temperature -40 à +75°C , EN50121-3-2, EN50121-4 and EN50155 (rolling stock railway)

SWMP-HR-8TPM-2GLM10 Idem with 2 uplink 1000SX SM 1310nm 10km, with LC M12 connectors

SWMP-HR-8TPM-2GLM20 Idem with 2 uplink 1000SX SM 1310nm 20km, with LC M12 connectors

MODELS NUMBER

Page 3 Vers ion 1 .3 – Dec 2015

Technology Standards • IEEE802.3 10BASE-T

• IEEE802.3u 100BASE-TX/100BASE-FX

• IEEE802.3ab 1000BASE-T

• IEEE802.3z 1000BASE-SX/1000BASE-

LX

• IEEE802.3x Full duplex and flow control

• IEEE802.1p QoS

• IEEE802.1Q Tag VLANs

• IEEE802.1w RSTP

• IEEE802.1x Port-based Network Access

Control

• IEEE802.1s MSTP

• IEEE802.3ad LACP

• IEEE802.3af/at Power over Ethernet

(PoE)

Forward and Filtering Rate • 14,880pps for 10Mbps

• 148,810pps for 100Mbps

• 1,488,100pps for 1000Mbps

Packet Buffer Memory • 2M bits

Processing Type • Store-and-Forward

• Auto Negotiation

• Half-duplex back-pressure and

IEEE802.3x full-duplex flow

control

• Auto MDI/MDIX

Address Table Size • 8192 MAC addresses

Power Input • Redundant power inputs:

M23: 24 - 48VDC

Power Consumption • Device: Max. 11W (without PoE)

• PoE power budget (depends on power

input): 120W Max.

PoE Power Output • Port 1 to 8: IEEE802.3at, up to 30W/

port

Protection • Overload current protection

• Reverse polarity protection

Mechanical Casing • Metal Case

• IP50

Dimensions • 288mm (W) x 161.5mm (D) x 64mm (H)

(11.3" (W) x 6.4" (D) x 2.5" (H))

Weight • 2.3Kg (5.07lbs)

Installation • Wall mounting

Interfaces Ethernet Port • 10/100BASE-M12 D-Code 4-pin Fe-

male: 8 ports

• Gigabit-M12 A-Code 8-pin Female/LC:

2 ports

Console Port • One M12 port

LED Indicators • Per Unit: Power 1 (Green)

Power 2 (Green)

• Per Port: Link/Activity (Green)

Alarm Contact • One relay M12 A-Code 4-Pin Female

output with current

1A @ 250 VAC

Environment Operating Temperature • -40°C to 75°C (-40°F to 167°F)

Tested @ -40°C to 85°C (-40°F to 185°

F)

Storage Temperature • -45°C to 85°C (-49°F to 185°F)

Ambient Relative Humidity • 5% to 95% (non-condensing)

Regulatory Approvals ISO • Manufactured in an ISO9001 facility

EMI FCC Part 15B, Class A

EN61000-6-4

EN55022

EN55011 (for EN50155)

EMS EN61000-6-2 • EN61000-4-2 (ESD Standards)

• EN61000-4-3 (RFI Standards)

• EN61000-4-4 (Burst Standards)

• EN61000-4-5 (Surge Standards)

• EN61000-4-6(Induced RFI Standards)

• EN61000-4-8 (Magnetic Field Stan-

dards)

• EN61000-4-9 (Pulsed magnetic field)

Environmental Test Compliance IEC61373 (Vibration) for EN50155

IEC61373 (Shock) for EN50155

IEC600680-2-32 Ed (Free fall)

Industrial Compliance EN50155

EN50121-3-2

EN50121-4

HARDWARE FEATURE

CXR Anderson Jacobson

Rue de l'Ornette

28410 Abondant - France

T +33 (0) 237 62 87 90

F +33 (0) 237 62 88 01

email: contact@cxr.com

Smart Solutions for Smart Networks

www.cxr.com

SWMP-HR-8TPM-2GM/GSM/GL