Switch Accessories - Neo-Dyn 2019-07-19 · Switch Accessories Thermowells P/N 047-0014 ITT Neo-Dyn...

1
Specifications Envelope Dimensions Select a figure from the above. Figure A has a .260 bore diameter for use on 100T/132T models while Figure B has a .385 bore diameter for use on 100TC/132TC models. Select a process connection size: 3/4 or 1 inch. Select an insertion length: U. Standard 100T/132T models use 2-1/2 inch “U” dimensions; standard 100TC/132TC models use 3-1/2 inch “U” dimensions. Insert selected dash number at end of part number.– See example. Part Number Dash Number 047-0014 DASH NO. FIGURE MATERIAL P Q HEX SIZE U A -02 A 316 CRES 3/4 3/4 1-1/8 2-1/2 4 -05 A 316 CRES 1 7/8 1-3/8 2-1/2 4 -04 A 316 CRES 3/4 3/4 1-1/8 4-1/2 6 -25 A 316 CRES 1 7/8 1-3/8 4-1/2 6 -28 B 316 CRES 3/4 3/4 1-1/8 3-1/2 5 -29 B 316 CRES 1 3/4 1-3/8 3-1/2 5 -07 B 316 CRES 3/4 3/4 1-1/8 4-1/2 6 -26 B 316 CRES 1 3/4 1-1/8 4-1/2 6 -09 B 316 CRES 3/4 3/4 1-1/8 7-1/2 9 -10 B 316 CRES 3/4 3/4 1-1/8 10-1/2 12 -27 B 316 CRES 3/4 3/4 1-1/8 12 13-1/2 ** Ordering Procedure Example FIG. A–– For use on 100T/132T Direct Mount FIG. B–– For use on 100TC/132TC Remote Mount Neo-Dyn ® Switch Accessories Thermowells P/N 047-0014 ITT Neo-Dyn offers a line of standard thermowells for use on its direct mount- ed (100T/132T) or remote mounted (100TC/132TC) temperature switches. Available in 316 stainless steel with 3/4 or 1 inch process connections and insertion lengths up to 12 inches. Specifications and dimensions subject to change. Neo-Dyn ® 28150 Industry Drive Valencia, CA 91355 tel: 864-647-9521 fax: 864-647-9574 www.neodyn.com AER0935_54 11/14

Transcript of Switch Accessories - Neo-Dyn 2019-07-19 · Switch Accessories Thermowells P/N 047-0014 ITT Neo-Dyn...

Specifications

Envelope Dimensions

Select a figure from the above. Figure A has a .260 bore diameter for use on 100T/132T models while Figure B has a .385 bore diameter for use on 100TC/132TC models.

Select a process connection size: 3/4 or 1 inch.

Select an insertion length: U. Standard 100T/132T models use 2-1/2 inch “U” dimensions; standard 100TC/132TC models use 3-1/2 inch “U” dimensions.

Insert selected dash number at end of part number.– See example.

Part Number Dash Number

047-0014 –

DASH NO. FIGURE MATERIAL P Q HEX SIZE U A

-02 A 316 CRES 3/4 3/4 1-1/8 2-1/2 4

-05 A 316 CRES 1 7/8 1-3/8 2-1/2 4

-04 A 316 CRES 3/4 3/4 1-1/8 4-1/2 6

-25 A 316 CRES 1 7/8 1-3/8 4-1/2 6

-28 B 316 CRES 3/4 3/4 1-1/8 3-1/2 5

-29 B 316 CRES 1 3/4 1-3/8 3-1/2 5

-07 B 316 CRES 3/4 3/4 1-1/8 4-1/2 6

-26 B 316 CRES 1 3/4 1-1/8 4-1/2 6

-09 B 316 CRES 3/4 3/4 1-1/8 7-1/2 9

-10 B 316 CRES 3/4 3/4 1-1/8 10-1/2 12

-27 B 316 CRES 3/4 3/4 1-1/8 12 13-1/2

**

Ordering Procedure Example

FIG. A– – For use on 100T/132T Direct Mount FIG. B– – For use on 100TC/132TC Remote Mount

Neo-Dyn®

Switch AccessoriesThermowells P/N 047-0014 ITT Neo-Dyn offers a line of standard thermowells for use on its direct mount-ed (100T/132T) or remote mounted (100TC/132TC) temperature switches. Available in 316 stainless steel with 3/4 or 1 inch process connections and insertion lengths up to 12 inches.

Specifications and dimensions subject to change.

Neo-Dyn® 28150 Industry Drive Valencia, CA 91355 tel: 864-647-9521 fax: 864-647-9574 www.neodyn.com

AER0935_54 11/14

thermowells_v4_thermowells.qxd 7/19/2019 3:40 PM Page 1