Swiss innovation in CMOS image sensors and CMOS cameras

CMOS Image Sensors

Board Level CamerasOEM Camera ModulesCMOS Cameras

Index

CMOS Image Sensors 4

A1312 Series 4A1312I Series 6A1312C Series 8A2080 Series 10

OEM Camera Modules 12

Board Level Cameras 13

Camera Selection Chart 14

CMOS Area Scan Cameras 16

MV-D640 Series 16MV-D752E Series 18DS1-D1024 Series 20MV-D1024E Series 22MV2-D1280-640 24DS1-D1312 Series 26MV1-D1312 Series 28MV1-D1312C-160 30MV1-D1312I Series 32MV1-D2080 Series 34

Cameras with Image Preprocessing 36

MV1-D1024E-PP01-40 36

Smart Cameras 38

SM2-D1024-80 38SM2-D1312 Series 40

3D Cameras 42

MV-D1024E-3D01-160 42

Electroluminescence Cameras 44

EL1-D1312-160 44

Accessories 46

CameraLink® Repeater 46

Board Level Cameras

For easier integration into tailored cus-tomer applications and especially where space or weight is a limiting factor we offer all our standard cameras as „Board Level“ models.

All of the features and technical data are identical to the standard cameras except for the mechanical dimensions. The footprint of these cameras is as small as 46 mm x 46 mm. The depth varies depending on the product type and chosen interface.

BOARd LeVeL CAMeRASCompact Solution For Application-Specific Systems

BL1-D1312-160-CL-12

BL1-D1024E-80-CL-12BL1-D1024E-40-CL-12

13

Board Level Cameras

CMOS Area Scan Cameras

Phot

onfo

cus

sens

or

Sens

or n

ame

/ge

nera

tion

Reso

lutio

n

Fram

e ra

te @

ful

l re

solu

tion

[fps

]

Dyn

amic

ran

ge [d

B]12

0 dB

= L

inLo

g®

Col

our

form

at

(Mon

ochr

om /

Col

our)

Inte

rfac

e (C

L /

PoC

L /

USB

/ G

igE)

max

. G

reys

cale

re

solu

tion

[bit]

Regi

on o

f In

tere

st

(MRO

I)

Glo

bal s

hutt

er

Nea

r In

frar

ed

Resp

onsi

vity

MV-D640(C)-33 - MT9V403 640 x 480 100 60 / / - / - / - 10 1 0

MV-D640(C)-66 - MT9V403 640 x 480 200 60 / / - / - / - 10 1 0

MV-D752E-40 A1024B / 2. 752 x 582 87 120 / - / - / / - 12 ≤ 16 0

DS1-D1024-40 A1024B / 2. 1024 x 1024 37 60 / - / / / - 10 1 0

DS1-D1024-80 A1024B / 2. 1024 x 1024 75 60 / - / / - / - 10 1 0

DS1-D1024-160 A1024B / 2. 1024 x 1024 150 60 / - / / - / - 10 1 0

MV-D1024E-40 A1024B / 2. 1024 x 1024 37 120 / - / / / - 12 ≤ 16 0

MV-D1024E-80 A1024B / 2. 1024 x 1024 75 120 / - / / - / - 12 ≤ 16 0

MV-D1024E-160 A1024B / 2. 1024 x 1024 150 120 / - / / - / - 12 ≤ 16 0

MV2-D1280-640 - MT9M413 1280 x 1024 488 59 / - / - / - / - 8 ≤ 16 0

DS1-D1312-40 A1312 / 3. 1312 x 1082 27 60 / - / - / - / - 10 1 +

DS1-D1312-80 A1312 / 3. 1312 x 1082 55 60 / - / - / - / - 10 1 +

DS1-D1312-160 A1312 / 3. 1312 x 1082 108 60 / - / - / - / - 10 1 +

MV1-D1312-40 A1312 / 3. 1312 x 1082 27 120 / - / - / - / 12 ≤ 512 +

MV1-D1312-80 A1312 / 3. 1312 x 1082 55 120 / - / - / - / 12 ≤ 512 +

MV1-D1312-100 A1312 / 3. 1312 x 1082 68 120 / - - / - / - / 12 ≤ 512 +

MV1-D1312-160 A1312 / 3. 1312 x 1082 108 120 / / - / - / - 12 ≤ 512 +

MV1-D1312-240 A1312 / 3. 1248 x 1082 170 120 / - / - / - / - 8 ≤ 512 +

MV1-D1312I-40 A1312I / 3. 1312 x 1082 27 120 / - / - / - / 12 ≤ 512 ++

MV1-D1312I-80 A1312I / 3. 1312 x 1082 55 120 / - / - / - / 12 ≤ 512 ++

MV1-D1312I-100 A1312I / 3. 1312 x 1082 68 120 / - - / - / - / 12 ≤ 512 ++

MV1-D1312I-160 A1312I / 3. 1312 x 1082 108 120 / - / - / - / - 12 ≤ 512 ++

MV1-D2080-160 A2080 / 3. 2080 x 2080 34 120 / - / - / - / - 12 ≤ 512 +

MV1-D2080-160 A2080 / 3. 2080 x 2080 51 120 / - / - / - / - 8 ≤ 512 +

14

Camera Selection Chart

Cameras with Image Preprocessing

Ph

oton

focu

s se

nsor

Sens

or n

ame

/ge

nera

tion

Reso

lutio

n

Fram

e ra

te @

ful

l re

solu

tion

[fps

]

Dyn

amic

ran

ge [d

B]12

0 dB

= L

inLo

g®

Col

our

form

at

(Mon

ochr

om /

Col

our)

Inte

rfac

e (C

L /

PoC

L /

USB

/ G

igE)

max

. G

reys

cale

re

solu

tion

[bit]

Regi

on o

f In

tere

st

(MRO

I)

Glo

bal s

hutt

er

Nea

r In

frar

ed

Resp

onsi

vity

MV1-D1024E-PP01-40 A1024B / 2. 1024 x 1024 37 120 / - / - / - / - 8 ≤ 16 0

Smart CamerasSM2-D1024-80 A1024B / 2. 1024 x 1024 75 120 / - - / - / - / 12 ≤ 16 0

SM2-D1312-80 A1312 / 3. 1312 x 1082 55 120 / - - / - / - / 12 ≤ 512 +

SM2-D1312-JPEG-100 A1312 / 3. 1312 x 1082 68 120 / - - / - / - / 12 ≤ 512 +

SM2-D1312-160 A1312 / 3. 1312 x 1082 108 120 / - - / - / - / 12 ≤ 512 +

3d CamerasMV-D1024E-3D01-160 A1024B / 2. 1024 x 1024 150 120 / - / - / - / - 12 ≤ 16 0

Version 1.2.0

electroluminescence CamerasEL1-D1312-160 A1312 / 3. 1312 x 1082 150 60 / - / - / - / - 12 1 +

15

CMOS Camera

Features – Aptina MT9V403 CMOS image sensor – 640 x 480 pixel resolution – Dynamic range up to 60 dB – Up to 200 fps @ full resolution – Global shutter – Monochrome and Colour – Standard features – CameraLink® interface – 10 bit greyscale resolution

MV-d640 SeRIeSHigh-Speed VGA

Spectral response of the Aptina MT9V403 CMOS image sensor

0

5

10

15

20

25

30

35

350 450 550 650 750 850 950 1050Wavelength [nm]

Quan

tum

Effic

iency

[%

]

0

5

10

15

20

25

350 450 550 650 750 850 950 1050

Wavelength [nm]

Quantu

m E

ffic

iency

[%

]

BlueGreen (B)Green (R)Red

Monochrome Color

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

16

CMOS Area Scan Cameras

MV-D640 Series

MV-D640-33-CL-10MV-D640C-33-CL-10

MV-D640-66-CL-10MV-D640C-66-CL-10

Image Sensor

Image sensor Aptina MT9V403Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1/2” (7.92 mm diagonal)Resolution 640 x 480 pixelsPixel size 9.9 µm x 9.9 µmActive optical area 6.34 mm x 4.75 mmDark current -Full well capacity ~90 ke¯Spectral range < 400 to 1000 nmResponsivity 480 x 10³ DN / (J/m²) @ 630 nm / 8 bit / gain = 1 / monochrome

(approximately 2600 DN / (lux s) @ 630 nm / 8 Bit / gain = 1 / monochrome)Quantum Efficiency 30 % @ 550 nmOptical fill factor 50 %Dynamic range Up to 60 dBColour format Monochrome or Colour (RGB Bayer)Characteristic curve LinearShutter mode Global shutterRead out mode Sequential read out or simultaneous read out (read out during exposure)

CameraExposure time 50 µs … 1.3 s / 10 µs stepsFrame rate 100 fps 200 fpsPixel clock 33 MHz 33 or 66 MHzCamera taps 1Greyscale resolution 8 bit / 10 bitFixed pattern noise (FPN) < 1.5 DN RMS @ 8 bit / gain = 1Analogue gain 1 … 8Digital gain -Configuration interface CL SERIAL (9600 Baud)Trigger modes • Free running (non triggered)

• External trigger inputFeatures • Region of Interest (ROI)

• External Clock availableInterface CameraLink® BaseOperating temperature 0°C ... +60°CPower supply +5 V DC (+10% / -5%) +12 V DC (±10%)Power consumption 1.5 W 3.3 WLens mount C-MountDimensions 55 x 55 x 37 mm³ 55 x 55 x 48 mm³Mass 200 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.5

17

CMOS Camera

Features – Photonfocus A1024B CMOS image sensor – 752 x 582 pixel resolution – Dynamic range up to 120 dB via LinLog®

– Up to 87 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink® and USB 2.0 interface – 12 bit greyscale resolution

MV-d752e SeRIeSCCIR camera with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1024B CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

18

MV-D752E Series

MV-D752E-40-CL-12 MV-D752E-40-U2-12

Image Sensor

Image sensor Photonfocus A1024B (2. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 2/3” (10.12 mm diagonal)Resolution 752 x 582 pixelsPixel size 10.6 µm x 10.6 µmActive optical area 8.0 mm x 6.2 mmDark current 2 fA/pixel @ 30°CFull well capacity ~200 ke¯Spectral range < 400 to 900 nmResponsivity 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1

(approximately 350 DN / (lux s) @ 610 nm / 8 Bit / gain = 1)Quantum Efficiency 45 % @ 550 nmOptical fill factor 35 % (geometrical)Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®, SkimmingShutter mode Global shutterRead out mode Sequential read out

CameraExposure time 10 µs … 0.41 s / 25 ns stepsFrame rate 87 fpsPixel clock 40 MHzCamera taps 1Greyscale resolution 8 bit / 10 bit / 12 bitFixed pattern noise (FPN) < 1 DN RMS @ 8 bit / gain = 1 / offset correction ONAnalogue gain 1Digital gain 1 / 2 / 4Configuration interface CL SERIAL (9600 Baud)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • 16 Multiple ROI (MROI) • Decimation X and Y • Image correction • Look-up table (LUT)

• Constant frame rate • Image information• Extended trigger input and strobe output functionality

Interface CameraLink® Base USB 2.0Operating temperature 0°C ... +60°CPower supply +12 V DC (±10%)Power consumption 1.6 W 3.0 WLens mount C-Mount (CS-Mount optional)Dimensions 55 x 55 x 32 mm³ 55 x 55 x 49 mm³Mass 200 g 210 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)

USB 2.0: MicroDisplay (GUI) and PFLib (SDK)OS CL: win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

USB 2.0: win2k; winxp

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.4

19

CMOS Camera

Features – Photonfocus A1024B CMOS image sensor – 1024 x 1024 pixel resolution – Dynamic range up to 60 dB – Up to 150 fps @ full resolution – Global shutter – Monochrome – Standard features – CameraLink®, PoCL and USB 2.0 interface – 10 bit greyscale resolution

dS1-d1024 SeRIeS1 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1024B CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

20

DS1-D1024 Series

DS1-D1024-40-CL-10DS1-D1024-40-PC-10DS1-D1024-40-U2-10

DS1-D1024-80-CL-10DS1-D1024-80-PC-10

DS1-D1024-160-CL-10DS1-D1024-160-PC-10

Image Sensor

Image sensor Photonfocus A1024B (2. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (15.42 mm diagonal)Resolution 1024 x 1024 pixelsPixel size 10.6 µm x 10.6 µmActive optical area 10.9 mm x 10.9 mm (maximum)Dark current 2 fA/pixel @ 30°CFull well capacity ~200 ke¯Spectral range < 400 to 900 nmResponsivity 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1

(approximately 350 DN / (lux s) @ 610 nm / 8 Bit / gain = 1)Quantum Efficiency 45 % @ 550 nmOptical fill factor 35 % (geometrical)Dynamic range Up to 60 dBColour format MonochromeCharacteristic curve LinearShutter mode Global shutterRead out mode Sequential read out Sequential or simultaneous read out

(read out during exposure)

CameraExposure time 10 µs … 0.41 s / 25 ns steps 10 µs … 0.83 s / 50 ns steps 10 µs … 0.41 s / 25 ns stepsFrame rate 37 fps 75 fps 150 fpsPixel clock 40 MHz 80 MHzCamera taps 1 2Greyscale resolution 8 bit / 10 bitFixed pattern noise (FPN) < 2.5 DN RMS @ 8 bit / gain = 1Analogue gain 1Digital gain 1Configuration interface CL SERIAL (9600 Baud)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • Image correction • Image information

• Standard trigger input and strobe output functionalityInterface CameraLink® Base

PoCL - Power over CameraLink® BaseUSB 2.0

CameraLink® BasePoCL - Power over CameraLink® Base

Operating temperature 0°C ... +60°CPower supply +12 V DC (±10%)Power consumption 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 WLens mount C-Mount (CS-Mount optional)Dimensions 55 x 55 x 32 mm³ (CL)

55 x 55 x 43 mm³ (USB 2.0)55 x 55 x 40 mm³

Mass 200 g 210 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)

USB 2.0: MicroDisplay (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

USB 2.0: win2k; winxp

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.4

2121

CMOS Camera

Features – Photonfocus A1024B CMOS image sensor – 1024 x 1024 pixel resolution – Dynamic range up to 120 dB via LinLog®

– Up to 150 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink®, PoCL and USB 2.0 interface – 12 bit greyscale resolution

MV-d1024e SeRIeS1 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1024B CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

22

MV-D1024E Series

MV-D1024E-40-CL-12MV-D1024E-40-PC-12MV-D1024E-40-U2-12

MV-D1024E-80-CL-12MV-D1024E-80-PC-12

MV-D1024E-160-CL-12MV-D1024E-160-PC-12

Image Sensor

Image sensor Photonfocus A1024B (2. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (15.42 mm diagonal)Resolution 1024 x 1024 pixelsPixel size 10.6 µm x 10.6 µmActive optical area 10.9 mm x 10.9 mm (maximum)Dark current 2 fA/pixel @ 30°CFull well capacity ~200 ke¯Spectral range < 400 to 900 nmResponsivity 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1

(approximately 350 DN / (lux s) @ 610 nm / 8 Bit / gain = 1)Quantum Efficiency 45 % @ 550 nmOptical fill factor 35% (geometrical)Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®, SkimmingShutter mode Global shutterRead out mode Sequential read out Sequential or simultaneous read out

(read out during exposure)

CameraExposure time 10 µs … 0.41 s / 25 ns steps 10 µs … 0.83 s / 50 ns steps 10 µs … 0.41 s / 25 ns stepsFrame rate 37 fps 75 fps 150 fpsPixel clock 40 MHz 80 MHzCamera taps 1 2Greyscale resolution 8 bit / 10 bit / 12 bitFixed pattern noise (FPN) < 1 DN RMS @ 8 bit / gain = 1 / offset correction ONAnalogue gain 1Digital gain 1 / 2 / 4Configuration interface CL SERIAL (9600 Baud) CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • 16 Multiple ROI (MROI) • Decimation X(1) and Y • Image correction

• Look-up table (LUT) • Constant frame rate • Image information • Extended trigger input and strobe output functionality

Interface CameraLink® BasePoCL - Power over CameraLink® Base

USB 2.0

CameraLink® BasePoCL - Power over CameraLink® Base

Operating temperature 0°C ... +60°CPower supply +12 V DC (±10%)Power consumption 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 WLens mount C-Mount (CS-Mount optional)Dimensions 55 x 55 x 32 mm³ (CL)

55 x 55 x 43 mm³ (USB 2.0)55 x 55 x 40 mm³

Mass 200 g 210 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)

USB 2.0: MicroDisplay (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

USB 2.0: win2k; winxp

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.7

(1) Feature only available for MV-D1024E-40 cameras

2323

CMOS Camera

Features – Aptina MT9M413 CMOS image sensor – 1280 x 1024 pixel resolution – Dynamic range up to 60 dB – Up to 490 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink® Full interface – 10 bit greyscale resolution

MV2-d1280-640-CL-8Very fast 1.3 Megapixel resolution CMOS camera

Spectral response of the Aptina MT9M413 CMOS image sensor

0.00

0.01

0.02

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.10

200 300 400 500 600 700 800 900 1000 1100

Qu

an

tum

Eff

icie

ncy

Wavelength [nm]

Quantum Efficiency vs Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

24

MV2-D1280-640

MV2-D1280-640-CL-8

Image sensor

Image sensor Aptina MT9M413Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1.3” (19.67 mm diagonal)Resolution 1280 x 1024 pixelsPixel size 12 µm x 12 µmActive optical area 15.36 mm x 12.29 mmDark current 0.6 fA/pixel @ 25°CFull well capacity ~63 ke¯Spectral range 350 to 900 nmResponsivity 400 DN / Lux sec @ 550 nm / 8 bit / gain = 1

(272’000 DN / J / m² @ 550 nm / 8bit / gain = 1)Quantum Efficiency 8 % @ 500 nmOptical fill factor 40 % Dynamic range 59 dB in linear modeColour format MonochromeCharacteristic curve LinearShutter mode Global shutterRead out mode Sequential or simultaneous read out

CameraExposure time 10 µs … 100 ms / 2 ns stepsFrame rate 488 fpsPixel clock 66 MHz (10 tap mode), 82.5 MHz (8 tap mode)Camera taps 8 / 10Greyscale resolution 8 bitFixed pattern noise (FPN) <0.5% rms / 1.5 % p·pAnalogue gain 1Digital gain 1 / 2 / 4Configuration interface CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • 16 Multiple ROI (MROI) • Decimation Y • Image correction • Look-up table (LUT)

• Constant frame rate • Image information • Extended trigger input and strobe output functionality

Interface CameraLink® FullOperating temperature 0°C ... +60°CPower supply +12 V DC (±10%)Power consumption 4.2 WLens mount M42x1, F-Mount, C-Mount (CS-Mount optional)Dimensions 78 x 78 x 46.2 mm³Mass 374 gConformity CE / RoHS / WEEE / Shock and Vibration tests IEC 68-2-6, IEC 68-2-27, IEC 68-2-29Specials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.4

2525

CMOS Camera

Features – Photonfocus A1312 CMOS image sensor – 1312 x 1082 pixel resolution – Good NIR response – Dynamic range up to 60 dB – Up to 108 fps @ full resolution – Global shutter – Monochrome – Standard features – CameraLink® interface – 10 bit greyscale resolution

dS1-d1312 SeRIeS1.4 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1312 CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

26

DS1-D1312 Series

DS1-D1312-40-CL-10 DS1-D1312-80-CL-10 DS1-D1312-160-CL-10

Image Sensor

Image sensor Photonfocus A1312 (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (13.6 mm diagonal) maximum resolution

2/3” (11.6 mm diagonal) 1024 x 1024 resolutionResolution 1312 x 1082 pixelsPixel size 8 µm x 8 µmActive optical area 10.48 mm x 8.64 mm (maximum)Dark current 0.65 fA/pixelFull well capacity ~100 ke¯Spectral range < 370 to 1000 nm (to 10 % of peak responsivity)Responsivity 210 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1

(approximately 620 DN / (lux s) @ 625 nm / 8 Bit / gain = 1)Quantum Efficiency > 50 %Optical fill factor > 60 %Dynamic range Up to 60 dBColour format MonochromeCharacteristic curve LinearShutter mode Global shutterRead out mode Sequential read out or simultaneous read out (read out during exposure)

CameraExposure time 10 µs … 1.68 s / 100 ns steps 10 µs … 0.83 s / 50 ns steps 10 µs … 0.41 s / 25 ns stepsFrame rate 27 fps 55 fps 108 fpsPixel clock 40 MHz 80 MHzCamera taps 1 2Greyscale resolution 8 bit / 10 bitFixed pattern noise (FPN) < 1 DN @ 8 bit / correction ONAnalogue gain 1Digital gain 1Configuration interface CL SERIAL (9600 Baud)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • Image correction

• Standard trigger input and strobe output functionalityInterface CameraLink® BaseOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption 2.5 W < 3.0 W < 3.3 WLens mount C-Mount (CS-Mount optional)Dimensions 60 x 60 x 45 mm³Mass 265 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.4

27

CMOS Camera

Features – Photonfocus A1312 CMOS image sensor – 1312 x 1082 pixel resolution – Good NIR response – Dynamic range up to 120 dB via LinLog®

– Up to 170 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink® and GigE interface – 12 bit greyscale resolution

MV1-d1312 SeRIeS1.4 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1312 CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

28

MV1-D1312 Series

MV1-D1312-40-CL-12MV1-D1312-40-GB-12

MV1-D1312-80-CL-12MV1-D1312-80-GB-12

MV1-D1312-160-CL-12MV1-D1312-100-GB-12

MV1-D1312-240-CL-8

Image Sensor

Image sensor Photonfocus A1312 (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (13.6 mm diagonal) maximum resolution

2/3” (11.6 mm diagonal) 1024 x 1024 resolutionResolution 1312 x 1082 pixels 1248 x 1082 pixelsPixel size 8 µm x 8 µmActive optical area 10.48 mm x 8.64 mm (maximum)Dark current 0.65 fA/pixelFull well capacity ~100 ke¯Spectral range < 370 to 1000 nm (to 10 % of peak responsivity) Responsivity 210 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1

(approximately 620 DN / (lux s) @ 625 nm / 8 Bit / gain = 1)Quantum Efficiency > 50 %Optical fill factor > 60 %Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®

Shutter mode Global shutterRead out mode Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates

CameraExposure time 10 µs … 1.68 s / 100 ns steps 10 µs … 0.83 s / 50 ns steps 10 µs … 0.67 s / 40 ns steps (GigE)

10 µs … 0.41 s / 25 ns steps (CL)10 µs … 0.279 s / 16.67 ns steps

Frame rate 27 fps 55 fps 68 fps (GigE) / 108 fps (CL) 170 fpsPixel clock 40 MHz 50 MHz (GigE) / 80 MHz (CL)Camera taps 1 2 3Greyscale resolution 8 bit / 10 bit / 12 bit 8 bitFixed pattern noise (FPN) < 1 DN @ 8 bit / correction ONAnalogue gain 1Digital gain 1 / 2 / 4 / 8Configuration interface Gigabit Ethernet / CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger input • Software triggerFeatures • Region of Interest (ROI) • 512 Multiple ROI (MROI)(1) • Decimation Y(1) • Image correction • 2 Look-up tables (LUT)(1)

• Constant frame rate • Crosshair(1) • Convolver 3x3 • Temperature(1) • Image information• Extended trigger input and strobe output functionality

Interface CameraLink® Base or GigEOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption 2.5 W (CL) / < 4.5 W (GigE) < 3.0 W (CL) / < 5.0 W (GigE)< 3.3 W (CL) / < 5.2 W (GigE) < 5.2 WLens mount C-Mount (CS-Mount optional)Dimensions 60 x 60 x 45 mm³ (CL) / 60 x 60 x 99 mm³ (GigE)Mass 265 g (CL) / 465 g (GigE)Conformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)

GigE: graphical user interface GEV Player and SDKOS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

GigE: win2k; winxp; winvista

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.2.2

(1) Features only available for CameraLink® cameras (for GigE cameras on request)

29

CMOS Camera

Features – Photonfocus A1312C CMOS image sensor – 1312 x 1082 pixel resolution – Integrated NIR cut-off filter(1)

– Dynamic range up to 60 dB – Up to 108 fps @ full resolution – Global shutter – Colour (RGB Bayer) – Standard features – CameraLink® interface – 12 bit output format

MV1-d1312C-160-CL-121.4 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1312C CMOS image sensor

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

30

MV1-D1312C-160

MV1-D1312C-160-CL-12

Image sensor

Image sensor Photonfocus A1312C (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (13.6 mm diagonal) maximum resolution

2/3” (11.6 mm diagonal) 1024 x 1024 resolutionResolution 1312 x 1082 pixelsPixel size 8 µm x 8 µmActive optical area 10.48 mm x 8.64 mm (maximum)Dark current 0.65 fA/pixelFull well capacity ~100 ke¯Spectral range 390 to 670 nm (to 10 % of peak responsivity)(1)

Responsivity 190 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1(approximately 560 DN / (lux s) @ 625 nm / 8 Bit / gain = 1)

Quantum Efficiency > 40 %Optical fill factor > 60 %Dynamic range 60 dB in linear modeColour format RGB Bayer (raw)Characteristic curve LinearShutter mode Global shutterRead out mode Sequential or simultaneous read out

(read out during exposure) for higher frame rates

CameraExposure time 10 µs … 0.41 s / 25 ns stepsFrame rate 108 fpsPixel clock 80 MHz Camera taps 2Greyscale resolution 8 bit / 10 bit / 12 bitFixed pattern noise (FPN) TBDAnalogue gain 1Digital gain 1 / 2 / 4 / 8Configuration interface CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger input • Software triggerFeatures • Region of Interest (ROI) • 512 Multiple ROI (MROI) • Image correction • 2 Look-up tables (LUT)

• Constant frame rate • Digital fine gain • Colour fine gain • Temperature • Image information• Extended trigger input and strobe output functionality

Interface CameraLink® BaseOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption < 3.5 WLens mount C-Mount (CS-Mount optional)Dimensions 60 x 60 x 45 mm³Mass 265 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.0.1

(1) A1312C image sensor available without NIR cut-off filter on request

31

MV1-D1312I-40-CL-12MV1-D1312I-40-GB-12

MV1-D1312I-80-CL-12MV1-D1312I-80-GB-12

MV1-D1312I-160-CL-12MV1-D1312I-100-GB-12

Image Sensor

Image sensor Photonfocus A1312I (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (13.6 mm diagonal) maximum resolution

2/3” (11.6 mm diagonal) 1024 x 1024 resolutionResolution 1312 x 1082 pixelsPixel size 8 µm x 8 µmActive optical area 10.48 mm x 8.64 mm (maximum)Dark current 1.15 fA/pixelFull well capacity ~100 ke¯Spectral range < 370 to 1100 nm (to 10 % of peak responsivity) Responsivity 300 x 10³ DN / (J/m²) @ 850 nm / 8 bit / gain = 1Quantum Efficiency > 50 %Optical fill factor > 60 %Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®

Shutter mode Global shutterRead out mode Sequential read out or simultaneous read out (read out during exposure)

CameraExposure time 10 µs … 1.68 s / 100 ns steps 10 µs … 0.83 s / 50 ns steps 10 µs … 0.67 s / 40 ns steps (GigE)

10 µs … 0.41 s / 25 ns steps (CL)Frame rate 27 fps 55 fps 68 fps (GigE) / 108 fps (CL)Pixel clock 40 MHz 50 MHz (GigE) / 80 MHz (CL)Camera taps 1 2Greyscale resolution 8 bit / 10 bit / 12 bitFixed pattern noise (FPN) < 1 DN @ 8 bit / correction ONAnalogue gain 1Digital gain 1 / 2 / 4 / 8Configuration interface Gigabit Ethernet / CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger input • Software triggerFeatures • Region of Interest (ROI) • 512 Multiple ROI (MROI)(1) • Decimation Y(1) • Image correction • 2 Look-up tables (LUT)(1)

• Constant frame rate • Crosshair(1) • Convolver 3x3 • Temperature(1) • Image information• Extended trigger input and strobe output functionality

Interface CameraLink® Base or GigEOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption 2.5 W (CL) / < 4.5 W (GigE) < 3.0 W (CL) / < 5.0 W (GigE) < 3.3 W (CL) / < 5.2 W (GigE)Lens mount C-Mount (CS-Mount optional)Dimensions 60 x 60 x 45 mm³ (CL) / 60 x 60 x 99 mm³ (GigE)Mass 265 g (CL) / 465 g (GigE)Conformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)

GigE: graphical user interface GEV Player and SDKOS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

GigE: win2k; winxp; winvista

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.6

(1) Features only available for CameraLink® cameras (for GigE cameras on request)

32

MV1-D1312I Series

CMOS Camera

Features – Photonfocus A1312I CMOS image sensor – 1312 x 1082 pixel resolution – Excellent NIR response – Dynamic range up to 120 dB via LinLog®

– Up to 108 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink® and GigE interface – 12 bit greyscale resolution

MV1-d1312I SeRIeS1.4 Megapixel resolution with proprietary Photonfocus sensor

Spectral response of the Photonfocus A1312I CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

3333

MV1-D2080 Series

CMOS Camera

Features – Photonfocus A2080 CMOS image sensor – 2080 x 2080 pixel resolution – Good NIR response – Dynamic range up to 120 dB via LinLog®

– Up to 51 fps @ full resolution – Global shutter – Monochrome – Extended features – CameraLink® interface – 12 bit greyscale resolution

MV1-d2080 SeRIeS4 Megapixel resolution with proprietary Photonfocus sensor

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

Spectral response of the Photonfocus A2080 CMOS image sensor

0%

10%

20%

30%

40%

50%

60%

200 300 400 500 600 700 800 900 1000 1100

Qu

antu

m E

ffic

ien

cy

Wavelength [nm]

Quantum Efficiency vs. Wavelength

34

MV1-D2080-160-CL-12 MV1-D2080-240-CL-8

Image Sensor

Image sensor Photonfocus A2080 (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 23.5 mm diagonal @ max. resolution ( < 25 mm image circle)Resolution 2080 x 2080 pixelsPixel size 8 µm x 8 µmActive optical area 16.64 mm x 16.64 mm (maximum)Dark current 0.65 fA/pixelFull well capacity ~100 ke¯Spectral range < 370 to 1000 nm (to 10 % of peak responsivity) Responsivity 210 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1

(approximately 620 DN / (lux s) @ 625 nm / 8 Bit / gain = 1)Quantum Efficiency > 50 %Optical fill factor > 60 %Dynamic range 60 dB in linear mode; 120 dB with LinLog®Colour format MonochromeCharacteristic curve Linear, LinLog®Shutter mode Global shutterRead out mode Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates

CameraExposure time 10 µs … 0.41 s / 25 ns steps 10 µs … 0.279 s / 16.67 ns stepsFrame rate 34 fps 51 fpsPixel clock 80 MHzCamera taps 2 3Greyscale resolution 8 bit / 10 bit / 12 bit 8 bitFixed pattern noise (FPN) < 1 DN @ 8 bit / correction ONAnalogue gain 1Digital gain Digital fine gain (0.1 … 15.9 / 0.001 steps)Configuration interface CL SERIAL (up to 115‘200 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger input • Software triggerFeatures • Region of Interest (ROI) • 512 Multiple ROI (MROI) • Decimation Y • Image correction • 2 Look-up tables (LUT)

• Constant frame rate • Crosshair • Convolver 3x3 • Temperature • Image information• Extended trigger input and strobe output functionality

Interface CameraLink® BaseOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption TBD WLens mount M42x1, F-Mount (C-Mount optional)Dimensions 60 x 60 x 38 mm³Mass 222 gConformity CE / RoHS / WEEESpecials Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.0.0

35

CMOS Camera

Features – Photonfocus A1024B CMOS image sensor – 1024 x 1024 pixel resolution – Real time image preprocessing on camera

FPGA – Dynamic range up to 120 dB via

LinLog®

– Up to 37 fps @ full resolution – Global shutter – Monochrome – CameraLink® interface – 12 bit greyscale resolution

MV-d1024e-PP01-40-CL-81 Megapixel camera with extended image preprocessing options

Advantages – Reduction of vision system computer CPU load – Removed reliance on specialised framegrabber or HW accelerators – Pixel Professor™ Lab a free GUI for easy graphical programming of the

camera FPGA – Common image preprocessing operators (e.g. Median, Convolver 3x3, …)

Pixel Professor™ Lab GUI

36

Cameras with Image Preprocessing

MV1-D1024E-PP01-40

MV-D1024E-PP01-40-CL-8

Image sensor

Image sensor Photonfocus A1024B (2. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (15.42 mm diagonal)Resolution 1024 x 1024 pixelsPixel size 10.6 µm x 10.6 µmActive optical area 10.9 mm x 10.9 mm (maximum)Dark current 2 fA/pixel @ 30°CFull well capacity ~200 ke¯Spectral range < 400 to 900 nmResponsivity 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1

(approximately 350 DN / (lux s) @ 610 nm / 8 Bit / gain = 1)Quantum Efficiency 45 % @ 550 nmOptical fill factor 35 % (geometrical)Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®, SkimmingShutter mode Global shutterRead out mode Sequential or simultaneous read out (read out during exposure)

CameraExposure time 10 µs … 0.41 s / 25 ns stepsFrame rate 37 fpsPixel clock 40 MHzCamera taps 1Greyscale resolution 8 bitFixed pattern noise (FPN) < 1 DN RMS @ 8 bit / gain = 1 / offset correction ONAnalogue gain 1Digital gain 1 / 2 / 4Configuration interface CL SERIAL (9600 Baud)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • 16 Multiple ROI (MROI) • Decimation X and Y • Image correction • Look-up table (LUT)

• Constant frame rate • Image information • Convolvers • Median Filters • Pixel arithmetic • Pipeline Processors • Extended trigger input and strobe output functionality

Interface CameraLink® BaseOperating temperature 0°C ... +60°CPower supply +12 V DC (±10%)Power consumption 2.6 WLens mount C-Mount (CS-Mount optional)Dimensions 55 x 55 x 40 mm³Mass 220 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PFRemote™ graphical user interface (GUI) and PFLib (SDK)Pixel Professor™ configuration Pixel Professor™ LabOS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.4

37

CMOS 3d Camera

Features – Photonfocus A1024B CMOS image sensor – 1024 x 1024 pixel resolution – Realtime laserline Peak Detection algorithm

on camera – Dynamic range up to 120 dB via

LinLog®

– Up to 2500 profiles/s @ 1024 x 32 pixel resolution

– Global shutter – Monochrome – CameraLink® interface – 12 bit greyscale resolution

MV-d1024e-3d01-160-CL-121 Megapixel 3d camera for laser triangulation applications

Advantages – No additional calculations on CPU – Reduction of vision system computer CPU load – PF 3D Suite a free GUI for an easy system set up and visualisation of 3D scans – Higher accuracy and robustness through new Peak Detection algorithm

Standard camerawith linear response (< 60 dB)

Photonfocus CMOS camera with LinLog® response (120 dB)

PF 3d Suite

COMPATIBLE WITH

LabVIEWNATIONAL INSTRUMENTS

Compatible with

42

3D Cameras

MV-D1024E-3D01-160

MV-D1024E-3D01-160-CL-12

Image sensor

Image sensor Photonfocus A1024B (2. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (15.42 mm diagonal)Resolution 1024 x 1024 pixelsPixel size 10.6 µm x 10.6 µmActive optical area 10.9 mm x 10.9 mm (maximum)Dark current 2 fA/pixel @ 30°CFull well capacity ~200 ke¯Spectral range < 400 to 900 nmResponsivity 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1

(approximately 350 DN / (lux s) @ 610 nm / 8 Bit / gain = 1)Quantum Efficiency 45 % @ 550 nmOptical fill factor 35 % (geometrical)Dynamic range 60 dB in linear mode; 120 dB with LinLog®

Colour format MonochromeCharacteristic curve Linear, LinLog®, SkimmingShutter mode Global shutterRead out mode Sequential or simultaneous read out (read out during exposure)

CameraExposure time 10 µs … 0.41 s / 25 ns stepsFrame rate 150 fps @ full resolution / 2500 fps @ 1024 x 32 resolution / 3900 fps @ 512 x 32 resolutionPixel clock 80 MHzCamera taps 2Greyscale resolution 8 bit / 10 bit / 12 bitFixed pattern noise (FPN) < 1 DN RMS @ 8 bit / gain = 1 / offset correction ONAnalogue gain 1Digital gain 1 / 2 / 4Configuration interface CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures • Region of Interest (ROI) • 16 Multiple ROI (MROI) • Decimation Y • Image correction • Look-up table (LUT)

• Constant frame rate • Image information • Peak Detector• Extended trigger input and strobe output functionality

Interface CameraLink® BaseOperating temperature 0°C ... +50°CPower supply +12 V DC (±10%)Power consumption 3.7 WLens mount C-Mount (CS-Mount optional)Dimensions 55 x 55 x 40 mm³Mass 210 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control PF 3D Suite graphical user interface (GUI) and PF3DLib (SDK)OS win2k; winxp; winvista; other OS (Linux, QNX, etc) on request

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.5

4343

CMOS Camera

Features – Photonfocus A1312 CMOS image sensor – 1312 x 1082 pixel resolution – Good NIR response – Uncooled CMOS camera – Designed for electroluminescence

applications – Global shutter – Monochrome – CameraLink® interface – 12 bit greyscale resolution

eL1-d1312-160-CL-12electroluminescence camera with nIR sensitive Photonfocus sensor

Sample image of solar cell inspection

44

Electroluminescence Cameras

EL1-D1312-160

EL1-D1312-160-CL-12

Image Sensor

Image sensor Photonfocus A1312 (3. Generation)Technology CMOS active pixel (APS)Scanning system Progressive scanOptical format / diagonal 1” (13.6 mm diagonal) maximum resolutionResolution 1312 x 1082 pixelsPixel size 8 µm x 8 µmActive optical area 10.48 mm x 8.64 mm (maximum)Dark current 0.65 fA/pixelFull well capacity ~100 ke¯ (nominal)Spectral range < 370 to 1000 nm (to 10 % of peak responsivity) Responsivity AdjustableQuantum Efficiency > 50 %Optical fill factor > 60 %Dynamic range TBDColour format MonochromeCharacteristic curve LinearShutter mode Global shutter

CameraExposure time 10 ms .... 1.6 s / 100 ns stepsFrame rate 5 fpsPixel clock 80 MHzCamera taps 2Greyscale resolution 12 bitConfiguration interface CL SERIAL (9600 or 57600 Baud, user selectable)Trigger modes • Free running (non triggered) • Interface trigger • External trigger inputFeatures Optimized for electroluminescence applicationsInterface CameraLink® BaseOperating temperature 0°C ... +40°CPower supply +12 V DC (±10%)Power consumption < 3.3 WLens mount C-Mount (CS-Mount optional)Dimensions 60 x 60 x 45 mm³Mass 265 gConformity CE / RoHS / WEEESpecials Adjustable backfocus; Opto-isolated I/Os

SoftwareCamera control Electroluminescence API (PfEL1Lib )OS win2k; winxp; winvista

All information provided in this flyer is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this flyer in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

Version 1.1.3

4545

Address Photonfocus AG Bahnhofplatz 10 8853 Lachen Schweiz

Telephone main office +41 (0)55 451 00 00 support +41 (0)55 451 01 37

Fax main office +41 (0)55 451 00 01

email general info@photonfocus.com sales sales@photonfocus.com support support@photonfocus.com

Internet website www.photonfocus.com

Version 2.1.0