SWEP AB427 – AHRI Certified · SWEP A is our AHRI Certified ... 410 430 450 PSI-320.8 68 122 212...
-
Upload
truongdang -
Category
Documents
-
view
219 -
download
2
Transcript of SWEP AB427 – AHRI Certified · SWEP A is our AHRI Certified ... 410 430 450 PSI-320.8 68 122 212...
Externally threaded
Connections*
Victaulic
*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.
Internally threaded
Soldering FlangesDIN/DNC
Pressure classesL Low. S Standard, evaluated per EN 13345.
Size Height of plate pack Total weight
SC S 4+(2,24×NoP) mm 21,9+(0,59×NoP) kg
0.157+(0.088×NoP) in 43.3+(1.301×NoP) lb
SC L 12+(2,24×NoP) mm 8,74+(0,59×NoP) kg
0.472+(0.088×NoP) in 19.27+(1.301×NoP) lb
Materials Channel plate Brazing
SC Stainless steel Copper
SWEP A is our AHRI Certified® range of Brazed Plate Heat Exchangers. If you are looking for the additional security of third-party verified performance for your HVAC systems, this is the choice.
The efficient AB427 has four different plate types, making it easy to adapt for a wide variety of heating and industrial applications. With 4″ connections it handles up to 156 m³/h (686 gpm) water flow.
SWEP AB427 – AHRI Certified®
Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
Y
F1 F2
F3 F4
694 (
27.32
)
567 (
22.32
)
304 (11.97)
179 (7.05)
280 100 mm (3.937 in) 100 mm (3.937 in) 100 mm (3.937 in) 100 mm (3.937 in) 155,5 m³/h (684.2 gpm)
0,405 dm3
0.0143 ft3
Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.
The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.
Cover platePlate package
Connections
Cover plateChannel plates
Zero hole channel plate
SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.
Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.
SWEP AB427 – AHRI Certified®
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
Y
SC-SASME / KHK
SC-SUL
SC-SPED
SC-LPED
242526272829303132
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED Circuit 1&2
350
370
390
410
430
450
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
355375395415435455475
-320.8 400
(PSI)
(°F)
UL
27
28
29
30
31
32
-196 204
(bar)
(°C)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
ASME KHK
S pressure
0123456789
101112
-196 225
(bar)
(°C)
PED
020406080
100120140160
(PSI)
-320.8 437 (°F)
0123456789
101112
-196 225
(bar)
(°C)
PED
020406080
100120140160
(PSI)
-320.8 437 (°F)
0123456789
101112
-196 225
(bar)
(°C)
PED
020406080
100120140160
(PSI)
-320.8 437 (°F)
242526272829303132
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED Circuit 1&2
350
370
390
410
430
450
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
355375395415435455475
-320.8 400
(PSI)
(°F)
UL
27
28
29
30
31
32
-196 204
(bar)
(°C)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
ASME KHK
S pressure
242526272829303132
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED Circuit 1&2
350
370
390
410
430
450
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
355375395415435455475
-320.8 400
(PSI)
(°F)
UL
27
28
29
30
31
32
-196 204
(bar)
(°C)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
ASME KHK
S pressure