SUSTAINING MEMBER LIST
27
December 2017 Sustaining Members List Abbey Metal Finishing Co Limited Unit 2, Dodwells Bridge Industrial Estate, Dodwells Road, Hinckley, LE10 3BZ Contact: Mr Paul Bennett-Managing Director Telephone: 01455 637284 Fax: 01455 899520 E-Mail: [email protected] Web: www.amfin.co.uk The company provides the following services and finishes :- NDT, hardness testing, conductivity, etch inspection, anodising (chromic, sulphuric, hard), chromate conversion coatings, magnesium chromating, phosphating, electroplating (copper, silver, cadmium, bronze, nickel, zinc, zinc nickel ), thermal spraying, stainless steel passivation. Adept Pure Water Ltd 36 Huxley Close, Park Farm South, Wellingborough, Northants NN8 6AB Contact: Giuseppe Frosi-Managing Director Telephone: 01933 677181 Fax : 01933 677847 E-Mail: [email protected] Web: www.adeptpwt.co.uk Full design, installation and commissioning of reverse osmosis systems, water softeners, semi and fully automatic DI plant, UV systems, cartridge filter systems and specialist systems to recycle water. Also service and repair all makes of water systems. AEM Limited 6 – 8 Wilton Road, Ramsgate, Kent. CT12 5HE Contact : Mr Vance Thomas Telephone: 01279 682535 Fax: 01279 682530 E-Mail: [email protected] Web: www.AEM.CO.UK Maintenance Repair and Overhaul provider for Aerospace and Military Industries, encompassing: machining, electro plating, non-destructive testing, surface paint applications, heat treatments and pressure testing. Aerotech Laboratories Ltd Unit 20 Mercia Business Village, Westwood Business Park, Coventry CV4 8HX Contact: Mr Mark Ricketts-Managing Director Telephone:02476 474474 Fax: 02476 474473 E-Mail:[email protected] Web:www.aerotechlabs.co.uk Laboratory analysis and test service to surface finishing including plating, etching, dye penetrant, wastewater, exposure monitoring and salt spray. We are UKAS and Nadcap accredited and hold approvals from many prime aerospace companies. A-GAS Electronic Materials Ltd Unit 3, iO Centre, Valley Drive, Swift Valley, Rugby CV21 1TW Contact: Mr J Sellars-Managing Director Telephone; 01788 537535 Fax: 01788 535835 E-Mail: [email protected] Web: www.chestech.co.uk Chestech are UK distributors for Dow Electronic Materials. Chestech are suppliers of processes for microfabrication, advanced packaging, electronic and printed circuit board
Transcript of SUSTAINING MEMBER LIST
December 2017
Sustaining Members List
Abbey Metal Finishing Co Limited
Unit 2, Dodwells Bridge Industrial Estate, Dodwells Road, Hinckley, LE10 3BZ
Contact: Mr Paul Bennett-Managing Director
Telephone: 01455 637284 Fax: 01455 899520
E-Mail: [email protected]
Web: www.amfin.co.uk
The company provides the following services and finishes :-
NDT, hardness testing, conductivity, etch inspection, anodising (chromic, sulphuric, hard),
chromate conversion coatings, magnesium chromating, phosphating, electroplating (copper,
silver, cadmium, bronze, nickel, zinc, zinc nickel ), thermal spraying, stainless steel
passivation.
Adept Pure Water Ltd
36 Huxley Close, Park Farm South, Wellingborough, Northants NN8 6AB
Contact: Giuseppe Frosi-Managing Director
Telephone: 01933 677181 Fax : 01933 677847
E-Mail: [email protected]
Web: www.adeptpwt.co.uk
Full design, installation and commissioning of reverse osmosis systems, water softeners, semi
and fully automatic DI plant, UV systems, cartridge filter systems and specialist systems to
recycle water. Also service and repair all makes of water systems.
AEM Limited
6 – 8 Wilton Road, Ramsgate, Kent. CT12 5HE
Contact : Mr Vance Thomas
Telephone: 01279 682535 Fax: 01279 682530
E-Mail: [email protected]
Web: www.AEM.CO.UK
Maintenance Repair and Overhaul provider for Aerospace and Military Industries,
encompassing: machining, electro plating, non-destructive testing, surface paint applications,
heat treatments and pressure testing.
Aerotech Laboratories Ltd
Unit 20 Mercia Business Village, Westwood Business Park, Coventry CV4 8HX
Contact: Mr Mark Ricketts-Managing Director
Telephone:02476 474474 Fax: 02476 474473
E-Mail:[email protected]
Web:www.aerotechlabs.co.uk
Laboratory analysis and test service to surface finishing including plating, etching, dye
penetrant, wastewater, exposure monitoring and salt spray. We are UKAS and Nadcap
accredited and hold approvals from many prime aerospace companies.
A-GAS Electronic Materials Ltd
Unit 3, iO Centre, Valley Drive, Swift Valley, Rugby CV21 1TW
Contact: Mr J Sellars-Managing Director
Telephone; 01788 537535 Fax: 01788 535835
E-Mail: [email protected]
Web: www.chestech.co.uk
Chestech are UK distributors for Dow Electronic Materials. Chestech are suppliers of
processes for microfabrication, advanced packaging, electronic and printed circuit board
December 2017
manufacture. Products include micro resists, dry film, bronze, copper, tin, nickel, chromium,
gold, silver, palladium, ruthenium, tin-nickel, palladium-nickel and nickel-phosphorous
plating. Ancillary products include cleaners, etches, activators, developers, post treatments
and stripping solutions.
Allenchrome Electroplating Ltd
Lancaster Road, Pocklington Industrial Estate, Pocklington, York, YO42 1NP
Contact: Mr Paul Allen-Managing Director
Telephone: 01759 303788 Fax: 01759 305776
E-Mail:[email protected]
Web www.allenchrome.co.uk
Metal polishing, bright nickel, bright chrome, all passivates, i.e. chromate, clear, olive drab
and lacquer. Finiguard. Acid zinc Vat/barrel specification work. Approvals by Britax PMG &
major hydraulic companies.
Almetron Ltd
Unit 24, Abenbury Way, Wrexham Industrial Estate, Wrexham, LLl3 9UZ
Contact: Mr Ian Rogers-Managing Director
Telephone: 01978 660297 Fax: 01978 661104
E-Mail:[email protected]
Almetron manufactures a large range of pre-treatment and process chemicals used in metal finishing, plus ancillary equipment for chemical dosing, work handling etc.
Aluminium Finishing Association
National Metalforming Centre, 47 Birmingham Road, West Bromwich, West Mids, B70 6PY
Contact: Mr Tom Siddle-Secretary
Telephone: 0121 601 6363 Fax: 0870 138 9714
E-Mail: [email protected]
Web: www.alfed.org.uk
The Aluminium Finishing Trade Association dealing with powder coating and architectural and strip anodizing.
Aluminium Surface Engineering
Bodmin Road, Wyken, Coventry, West Midlands CV2 5DX
Contact : Mr John Alksnitis – Managing Director
Telephone : 02476 611921 Fax: 02476 602196
E-Mail: ase4anodising.co.uk
Web: ase4anodising.co.uk
Established 1947. Specialists in hard, sulphuric, chromic and titanium anodising, also SurTec 650 and Alocrom 1200. Quality assured ISO 9001 and 14001, and major company standards, with in-house laboratories. Founding member International Hard
Anodizing Association. Access to new technologies and university research. No. 1 sub-contractor to the automotive, aerospace, catering, medical and defence industries. Free technical advice and samples.
December 2017
Arkema Ltd
420, rue d’Estienne d’Orves, 92705 Colombes Cedex-France
Contact: Mr Ken Griffiths-Global Key Account Manager-Kynar Telephone: 0788 4475387 Fax: 0121 329 1368
E-Mail:[email protected]
Web: www.arkema.com
Atofina manufactures and supplies a wide portfolio of plastic and chemical raw materials
worldwide. From the powder materials range, RILSAN® polyamide (nylon 11) offers high
performance coatings for metals with outstanding resistance to corrosion, abrasion and
impact, and KYNAR 500® PVDF is renowned for its excellent outdoor ageing properties. Also
available are chemicals for surface treatment and additives for paint and powder coating
formulations.
Armac Manufacturing
160 Dollman Street Birmingham B7 4RS
Contact Mr R McGrail – Production Manager
Telephone: 0121 359 2111
E-Mail: [email protected]
Web: www.armacmartin.co.uk
Armac Martin are Manufacturers of High Quality, hand finished solid brass kitchen hardware,
we also have a subcontract machining division, Brass turned parts.
Atkinson Associates
21 De Havilland Drive, Hazlemere, Bucks, HP15 7FP
Contact: Mr Michael Atkinson -Principal
Telephone: 01494 531974
E-Mail: [email protected]
Web: www.atkinson-associates.org
Consultancy on all aspects of the specification and supply of protective coatings for
architectural usage, especially anodising and powder coatings. Approved independent
inspection and testing. Failure investigation and expert witness.
BEP Surface Technologies Ltd
Eton Hill Road, Eton Hill Road, Radcliffe, Macnchester M26 2XT
Contact Mr Andrew McClusky
Telephone : 0161 724 9090 Fax 0161 725 9539
E-mail: [email protected]
Web: www.bep-st.com
Surface finishing company offering Copper, Nickle and Hexavalent Chrome plating, combined
with in-house blasting, turning, grinding, linishing, buffing, polishing and superfinishing
facilities of huge capacity.
Specialized in the manufacture and refurbishment of both small and large engineering
components including copper chill rolls and other process rolls, pump shafts, piston rods,
rotors, etc.
Certified to ISO 9001, ISO 14001, OHSAS 18001 and licensed through an IPPC permit.
Batten and Allen Ltd
Bridge End, Love Lane Trading Estate, Cirencester, Glos. GL7 1NQ
Contact: Mr John Bartle – Senior Plating Manager
December 2017
Telephone: 01285 655220 Fax: 01285 652650
E-Mail: [email protected]
Web: www.batten-allen.co.uk
Specialists in reel to reel and wire plating. Batten and Allen Ltd offer a complete package
from design, stamping and plating of connectors and lead frames.
Bellurgan Precision Engineering Ltd
Bellurgan Point, Dundalk, County Louth, Ireland
Contact: Mr Andrew Carroll
Telephone: 00 353 429371418 Fax: 00 353 429371761
E-Mail: Andrew [email protected]
Web: www.bellurgan.com
A manufacturer of precision machined parts for the medical device, aerospace and industrial
sectors.
E. Braude (London) Ltd
Liberta House, Scotland Hill, Sandhurst, Berkshire, GU47 8JR
Contact: Mr David Snoxhill-Managing Director
Telephone: 01252 876123 Fax: 01252 875281
E-Mail: [email protected]
Web: www.braude.co.uk
Manufacturers of Heating and cooling equipment for the highly corrosive solutions found in
Metal Finishing and Processing, including:
• POLARIS Modular and Popular electric immersion heaters
• NAUTILUS PTFE tank heaters and coolers
• JETSTREAM external heating and cooling systems
• THERMASTER non-corrodible thermostatic controllers
• LEVELMASTER liquid level controllers
• TANKMASTER DUAL temperature and Level controller
• FROGSPAWN thermal insulation spheres
• BRAUDE self priming chemical pumps
• Process and storage tanks
BRAUDE equipment will not corrode. Management systems certified to ISO BS EN 9001:2000
British Society for Coatings Technology
PolYnfo Associates Ltd, 30 Stonehill Way, Brixworth, Northants, NN6 9LW
Contact: Mr Keith Dobell-President
Telephone: 01604881513 Fax: 01384 400020
E-Mail: [email protected]
The British Society for Coatings Technology (BSCT) was founded in 1928 by a group of paint
technologists. Its mission is to promote education, research and communication within the
coatings industry, supporting its members in their professional development. It holds regular
technical meetings and events.
Frederick Cooper
44-45 Price Albert Street, Bordesley Green, Birmingham B9 5AZ
Contact: Mr Luke Allsopp – Commercial Manager
Telephone: 0121 772 4201 Fax: 0121 771 2472
E-Mail: [email protected]
Component Coating/Finishing Specialist in the world of powder Coating and Paint Straying.
Based in the midlands, serving nationwide.
December 2017
R A Chilton Ltd
Unit 5, Tarvin Sands Industries, Barrow Lane, Tarvin, Chester CH3 8JF
Contact: Wendy Chilton – Managing Director
Telephone: 01829 749224
E-Mail: [email protected]
Web: www.rachilton.com
Copper electroplating, specialist in electroplated copper rotors on steel shaft. Copper Coating
to fill grooves and other form with thick build up to allow machining of external form.
Clive Plant & Associates
23 Ironstone Hollow, Hook Norton, Oxfordshire, OX15 5NA
Contact: Mr Clive D Plant-Partner
Telephone: 01608 7305090
E-Mail: [email protected]
Web:www.cliveplant.co.uk
Approved independent inspection, testing and Consultancy services for polyester powder
coatings, anodic films, fluoropolymers and site applied architectural metalwork finishes. Specification writing. Arbitration services. Advice on remedial site applied finishes.
Coventya Ltd
Enterprise Drive, Station Road, Four Ashes, Wolverhampton, WV10 7DF
Contact: Mr Duncan Beckett-Director
Telephone: 01902 797990 Fax: 01902 798295
E-Mail: [email protected]
Web: www.coventya.com
Primary manufacturer of Molclear and Molfin cathodic electrocoat products for polished and
plated surfaces offering high hardness and chemical resistance. Integral and post dye
available in a wide colour range. We know offer electroplating products from the Coventya
range, including Electroless Nickel, Zinc, Zinc Alloys, Passivates and topcoats, many with
Automotive approvals.
Cynergy3 Components Ltd
7 Cobham Road, Ferndown Industrial Estate, Wimborne Dorset BH21 7PE
Contact:Mr Ben Stear
Telephone: 01202 897969
Email:
Web: www.cynergy3.com
A world leading manufacturer of Liquid Level and Flow Sensors, Pressure Transducers, High
Voltage and Radio Frequency Relays.
DDG Plating Ltd
7 Palm Street, New Basford Nottingham NG7 7HS
Contact: Miss Jana Tyralova
Telephone: 01159 787195 Fax: 0015 9420582
Email: [email protected]
Web: www.ddgplating.com
We pride ourselves on delivering great quality, fast turnaround and a friendly and efficient
service and speicalise in processes such as zinc, nickel, chrome, tin, silver anodizing,
electroless nickel and alocrom.
Paint or metal stripping and cleaning services also available.
Dublin Aerospace
Dublin International Airport, Dublin, Ireland
December 2017
Contact: Paul Carolan – Landing Gear Support Engineer
Telephone : +35318126300
E-Mail: [email protected]
Web: www.dublinaerospace.com
Landing gear overhaul facility with approval on BOEING 737 and AIRBUS A320 families.
Electroplating capabilities include: Hard Chrome, Sulphahate Nickel, LHE Cadmium, Bright
Cadmium Passivation and supporting processes.
Dyne Technology Ltd
Newton House, 5 Parkside Court, Greenhough Road, Lichfield, Staffs WS13 7FE
Contact: Mr Chris Lines – Managing Director
Telephone: 01543 411460 Fax: 01543 415140
E-Mail:[email protected]
Web:www.dynetechnology.co.uk
Dyne Technology Ltd specialise in the supply of affordable plasma surface treatment, corona
surface treatment and robotic automation solutions to companies manufacturing or
processing metal, composites, plastic and rubber components.
Ecoat Ireland Limited
Unit 13, Blaris Industrial Estate, Altona Road, Lisburn BT27 5QB
Contact : Mr Justin Rooney
Telephone : 028 92 604798 Fax: 028 92 604040
E-Mail: [email protected]
Web: www.ecoat.co.uk
Established 1994, we at Ecoat Ireland are experienced providers of electrophoretic coatings
and secondary operations to meet a varied range of customer requirements in the
automotive, industrial and aerospace sectors.
E C Williams Ltd
17-25 Spencer Street, Birmingham, B18 6DN
Contact: Mr H Skouby-Managing Director
Telephone: 0121 236 2524 Fax: 0121 233 4931
E-Mail: [email protected]
Web: www.ecwilliams.co.uk
Electroplating of zinc/nickel alloy, zinc, tin, copper, nickel, silver and brass. Blacking of
stainless steel. Work to BS and industry standards. Both jig and barrel facilities.
E Williams Plating Limited
Unit 3, The Dean, New Alresford, Hampshire, S024 9BQ
Contact: Gavin Wyeth-Managing Director
Telephone: 01962 733199 Fax: 01962 735146
E-Mail:[email protected]
Bright nickel, electroless nickel, chromium, zinc (clear/colour/black passivates), alocrom,
silver, tin (rack and barrel), gold, sulphuric anodising, iridite NCP and our own XRF testing
facilities.
Fastener Engineering & Research Association
National Metalforming Centre,47 Birmingham Road, West Bromwich, B70 6PY
Contact: John Houseman-Director General
Telephone:0121 601 6350 Fax: 0121 601 6373
E-Mail: [email protected]
December 2017
Web:www.fera.org.uk
FERA is a pioneering professional association for engineers and designers involved in the
specification of fasteners, the installation of mechanical fasteners, the use of adhesives and
involvement in application joint design.
Fischer Instrumentation (GB) Ltd
Gordleton Industrial Park, Pennington, Lymington, Hants, S041 8JD
Contact: Mrs Claire Cave-Sales co-ordinator
Telephone: 01590 684100 Fax: 01590 684110
E-Mail:[email protected]
Web:www.fischergb.co.uk
This international company is a technical world leader in the supply of Coating Thickness
Measuring and Materials Testing Equipment. ' Fischerscope' products include low cost hand-
held instruments, Couloscopes, bench instruments, Beta Backscatter and X-Ray Fluorescence
Systems. Fischer X-Ray systems lead the world in their ability to measure triple coatings
simultaneously, as well as provide accurate measurements of electroless coatings and alloy
compositions.
Fraser Cleaning Technologies Ltd
24 Grange Road, Houstoun Industrial Estate, Livingston, EH54 5DE
Contact: Mr Graham Fraser-Managing Director
Telephone: 01506 443058 Fax: 01506 443161
E-Mail: [email protected]
Web: www.frasertech.co.uk
Supplier of cleaning equipment, chemicals, electronic soldering products, single and multi
stage ultrasonic and spray wash equipment, solvent and aqueous chemistries and waste
minimisation equipment.
Galvanizers Association
56 Victoria Road, Sutton Coldfield, West Midlands B72 1SY
Contact: Mr William Smith- Director
Telephone: 0121 355 8838 Fax: 0121 355 8727
E-Mail: [email protected]
Web: www.galvanizing.org.uk
The Galvanizers Association provides authoritative information and advice on hot dip
galvanizing to users and potential users. It has a technical team to answer queries about
Galvanizing. It also monitors regulations, takes a leading role in standards development and
oversees research projects to support and develop the Industry.
Gilbeyco Ltd
2 Pembroke Road, Aylesbury, Bucks HP20 1DB
Contact: Mr Cedric Clifford-Managing Director
Telephone:01296 414966 Fax: 01296 414969
E-Mail:[email protected]
Web:www.gilbeyco.com
UK Distributors and Stockists of MEFIAG Pumps and Filters, Filter Papers, Cloths, Cartridges,
Maxarea and Carbon Units; RGB Rectifiers, Transformers, Polarity Reversers; AH Meters, Dosing Controller Heaters, Thermostats, Barrels, Tanks and Plant in all Metals and Plastics.
Godrej & Boyce Mfg. Co. Ltd, Locks Division
Sourcing and Vendor Development, Purchase Department, Plant No.18A, Pirojshanagar,
Vikhroli, Mumbai 400079 , India
Contact: Mr Deepak J Desai-D G M, Sourcing and Vendor Development
Telephone: +91 22 67965814 Fax: +91 22 67961511 Mob: +91 9821452787
E-Mail: [email protected]
December 2017
Web: www.godrej.com
Most trusted brand and largest manufacturer of locks and architectural hardware in India,
known for its quality and durability
Greentree – Carplugs
Verton House, Alexandra Way, Tewkesbury, Gloucestershire GL20 8NB
Contact : Ms Tessa Abraham
Telephone: 01684 533800
E-Mail: [email protected]
Web: www.greentree-shercon.co.uk
Guyson International Ltd
Snaygill Industrial Estate, Keighley Road, Skipton, North Yorks, BD23 2QR
Contact: Mr Richard Standing-Int Bus Dev Manager
Telephone: 01756 799911 Fax: 01756 790213
E-Mail:[email protected]
Web:www.guyson.co.uk
Design and Manufacture of dry blast grit etching and shot peening equipment both manual
and automated; Kerry brand ultrasonic aqueous and solvent cleaning tanks, submersible
transducers and ultrasonic generators; and also spray wash equipment
H3P Technologies Ltd
Clifton House, High Street, Datchet Berkshire SL3 9EQ
Contact: Ronald Catton
Telephone: 01753 424209
Email: [email protected]
Web: www.hsptechnologies.com
H3P Technologies Ltd., supplies an extensive range of metal finishing chemicals for
manufacturing industry. All products are developed in-house to meet customer requirements
and full technical support is provided. Specialist consultancy work covering metal finishing
issues can be undertaken using the lastest surface analysis equipment.
All chemicals are manufactured in a facility with ISO 9001 and ISO 14001 accreditation.
HMG Paints Ltd
Riverside Works, Collyhurst Road Manchester M40 7RU
Contact: Mr Steve Crossman
Telephone: 0161 205 7631
Email: [email protected]
Web: www.hmgpaint.com
HMG are the UK’s largest Independent paint manufacturer and are proud to work alongside
customers to create the very best tailored solutions, supported by excellent service.
Hirtenberger Engineered Surfaces Gmbh
Viktor-Kaplan-Straße 2D, A-2700 Wiener Neustadt, Austria
Contact: Dr Wolfgang Hansal-Managing Director
Telephone: 0043 2622 23842 13 Fax : 0043 2622 23842 40
E-Mail: [email protected]
Web: www.happyplating.at
Happy Plating offers new, innovative process solutions in the field of electrochemical surface
finishing, and examines their compatibility with industrial process lines using precise
prototyping. These processes are successfully integrated into running production processes
for tailoring technical surfaces. Consequently, Happy Plating is a leading expert in transferring
DC plating lines towards pulse plating and offers traineeship, know-how transfer, as well as
December 2017
technical coaching and galvanic line construction. Computer modelling, test of feasibility and
production of (small) high-tech series, especially high performance coatings on aluminium,
completes the program of Happy Plating.
Hardide Coatings
Unit 11, Wedgewood Road, Bicester, Oxfordshire, OX26 4UL
Contact: Dr Yuri Zhuk - Technical Director
Telephone: 01869 353830 Fax: 01869 353831
E-Mail: [email protected]
Web: www.hardide.com
Hardide is a range of advanced tungsten/tungsten carbide coatings for metal parts which
provide exceptional wear and erosion resistance combined with toughness and ductility and
which can coat internal surfaces and complex geometries.
Hart Materials Limited
Carrier House, Carrier’s Fold,off Church Road, Wombourne, South Staffordshire WV5 9DH
Contact: Dr Tony Hart – Managing Director
Telephone: 01902 895446 Fax: 01902 897469
E-Mail:[email protected]
Web:www.hartmaterials.com
Hart Materials Limited is involved in supplying raw materials for varied applications within the
surface engineering market, particularly in the nickel electroforming sector. Other industries
prominent in the company’s activities include electronic interference shielding, battery
production, paint manufacture and powder metallurgy. These industries are serviced with a
range of specialised small particulate products, including nickel and other metal powders,
nickel-coated graphite and silver-coated glass. They individually selected to satisfy the
technological requirements of the individual customer on the basis of our company’s 30 years
of experience in these markets.
Hawking Electrotechnology Ltd
Unit B2, The Wallows Industrial Estate, Fens Pool Avenue, Brierley Hill, West Mids, DY5 1QA
Contact: Mr Jim Metaxas-Managing Director
Telephone: 0121 585 6263
E-Mail: [email protected]
Web: www.hawking.co.uk
Developers and manufacturers of high performance electrophoretic coatings sold and
marketed worldwide via a well established distribution network. Our processes provide
environmentally acceptable alternatives to plating, anodising and conventional lacquering.
Hendor – PE UK Ltd
Carrington Business Park, Manchester Road, Carrington, Manchester, M31 4DD
Contact: Mr Darrell Astbury- sales
Telephone: 0161 776 4331 Fax: 0161 776 4334
E-Mail: [email protected]
Web: www.hendor-pe.co.uk
Hendor-pe UK Ltd are suppliers of Magnetic and Vertical sealless Pumps and Filters, DC
December 2017
Switch Mode and Pulse Reverse Power Supplies and UK distributor for Scandymet Immersion
Heaters
Henkel Technologies
Technology House, Wood End Lane, Hemel Hempstead, HP2 4RQ
Contact: Mr Andy Rabbetts-Technical Manager
Telephone: 01442 278000 Fax: 01442 216721
E-Mail:[email protected]
Web:www.henkel.com
Henkel Metal Chemicals product range includes the Parker+Amchem range of phosphate
(Granodine®) and chromate (Alocrom®) conversion coatings, Almeco® and Almecolour®
aluminium treatment, Suncorite® self phosphating conversion coatings, Armourbond heat
resistant coatings, Suncorite Aqua water based anti corrosive coatings, Autophoretic coatings,
neutral and alkali spray and immersion cleaners. Paint strippers, derusters, paint spray booth
treatment chemicals, dewatering oils temporary preservation products, machine tool lubricants, aviation, railway and vehicle cleaners.
Hong Kong Electro-plating Merchants Association
Unit 10, 21/F, Mega Trade Centre, 1-6 Mei Wan Street, Tsuen Wan, Hong Kong
Contact: Mr Dennis Kwok On Ng-Chairman
Telephone:(001)852 2776 8282-3 Fax: (001) 852 27883137
E-Mail:[email protected]
Web:www.hkelectro-plating.com
The Hong Kong Electro-plating Merchants Association was founded in December 1948. The
Association is aiming for providing benefits to the electro-plating industry, facilitating industry
networking, protecting the legal rights and interests, promoting market development,
enhancing surface treatment technology and cultivating talented people in the industry.
The Association's functions include introducing the latest electro-plating technology, pollution
and sewage treatment solution through industrial exhibition, technical seminars, workshops
and publications. By organising overseas visit tours, we facilitate the technological exchange
with the industrial bodies worldwide. In addition to the active collaboration with the mainland
and international electro-plating industrialists, regular meetings provide opportunities for
technological and marketing exchange.
Hong Kong Surface Finishing Society
LG1 HKPC Building,78 Tat Chee Avenue, Kowlown Tong, Hong Kong
Contact: Mr Sam Chong-Chairman
Telephone:00852 81200323 Fax: 00852 81200325
E-Mail: [email protected]
Web:www.hksfs.org.hk
Indestructible Paint Ltd
19-25 Pentos Drive, Sparkhill, Birmingham, B11 3TA
Contact: Mr John Bourke-Technical Sales Manager
Telephone: 0121 702 2485 Fax : 0121 778 4338
E-Mail: [email protected]
Web: www.indestructible.co.uk
Manufacturers of specialist coatings for a wide range of markets, including aero engine and
airframe; high temperature, chemical and corrosion resistance; thermal barrier requirements;
MOD approved and high performance industrial use.
December 2017
Inflite Engineering Services Ltd
Units 1 & 2 Farrow Road, Chelmsford Industrial Park, Chelmsford Essex CM1 3TH
Contact : Mr Adrian Yeo – Laboratory Manager
Telephone: 01279 681 681
Email: [email protected]
Website: www.inflite.co.uk
Inflite are prime suppliers to the aerospace market. Our business is based around four
Divisions - each possessing knowledge and expertise that are second to none in their
respective sectors.
Institute of Corrosion
The Newton Building, St George’s Avenue, Northampton, NN2 6JB
Contact: Dr Jane Lomas-Honorary Secretary
Telephone: 01928 734996
E-Mail: [email protected]
Web site: www.icorr.org
ICorr is one of the world's leading organisations concerned with the prevention of industrial
corrosion and the development of technology for corrosion control. The Institute organises
course seminars, training sessions, technical meetings and specialists conferences. ICorr
enjoys a good relationship with Government departments and other official bodies concerned
with corrosion control and advise the Department of Trade and Industry on ii corrosion
publications. It provides education and training in corrosion science and engineering theory
and practice for members and non-members. Meetings are held locally and at national level
via branches and divisions. The Institute also operates a Corrosion Expertise Database, as a
first line of contact between enquirers and specialist consultants.
Interplex PMP Ltd
Elliot Industrial Estate , Arbroath, Dundee, Scotland, DD11 2NN
Contact: Dr William Waugh – Plating Department Manager
Telephone: 01241 873867 Fax: 01241 879597
E-Mail: [email protected]
Web: www.interplex.com
Interplex PMP manufactures precision components including stamped and plated parts, plastic
mouldings (including insert and in-line moulding), assemblies and tape and reel packaging for
the automotive, medical and electronics industries.
Ionotec Ltd
14 Berkeley Court, Manor Park, Runcorn, Cheshire WA7 1TQ
Contact: Dr John S Blackburn-Managing Director
Telephone: 01928 579668 Fax: 01928 579627
E-Mail: [email protected]
Web: www. Ionotec.com
Ionotec is a world leader in coating of metals using electrophoretic deposition (EPD).
Examples of coatings supplied include alumina, zirconia and glasses. We also design and
provide prototype EPD facilities.
K P D Midlands Ltd
Unit 1, Angel Works, St Andrews Street, Birmingham B9 4JT
Contact: Kevin Jackson-Managing Director
Telephone:0121 766 8226 Fax: 0121 771 2064
E-Mail: [email protected]
K P D are a surface treatment engineering company who supply electroplating jigs, anodising
December 2017
jigs, tanks and vats, vat heaters, cooling coils, baskets, pvc coating and also provide a repair
service.
KraftPowercon UK Ltd
Unit 17 Fairway Business Centre, Airport Service Road, Portsmouth, P03 5NU
Contact: Mr Robin Eastley-Manager
Telephone: 023 92 629900 Fax: 023 92 629901
E-Mail:[email protected]
Web: www.kraftpowercon.com
KraftPowercon UK Ltd manufactures a range of pulse rectifiers. Of particular note are the
range of reverse pulse rectifiers for improving the productivity and quality of the through hole plating of printed circuit boards.
Linnhoff & Partners Galvanotechnik Gmbh
Luenkerhohl 32A,58644 Iserlohn 1,Germany
Contact: Mr Frank Kissmer-Managing Director
Telephone:0049 2371 15750 Fax: 0049 2371 157529
E-Mail: [email protected]
Web:www.linnhoff-partner.com
A manufacturer with over 30 years experience manufacturing electroplating barrels and
aggregates, made from PP and PE1000 plus spare parts such as contact cables, vat
perimeter, sieve plugs, cog wheels etc.
Loadlok UK
Unit b, Abercanaid Industrial Estate, Merthyr Tydfil, CF48 1YF
Contact: Mr Gareth Phillips - Operations Director
Telephone: 01685 354500 Fax: 01685 354515
E-Mail: [email protected]
Web: www.loadlok.com
Loadlok is Europe’s specialist provider of cargo control systems. Serving transport companies,
trailer/bodybuilders, Original Equipment Manufacturers, distributors and retailers. Our
solutions can help you increase load volume, simplify handling and protect your valuable
shipments in road, rail, sea and air transport.
Loughborough Surface Analysis Ltd
Pegasus House, Prince William Road, Loughborough, Leicestershire, LE11 5GU
Contact: Mr Mike Petty-Director
Telephone 01509 260779 Fax : 01509 230719
E-mail: [email protected]
Web: www.LSALtd.co.uk
LSA provides a surface-analysis and depth-profiling service to help with issues such as:
surface cleanliness; surface chemistry; surface composition; delamination; impurities;
dewetting; particulates; and failure analysis. We are flexible and responsive, offering a rapid
turn-around.
Lufthansa Technik Landing Gear Services Ltd
Unit 3, Dawley Park, Kestrel Way, Hayes, Middlesex UB3 1HP
Contact: Luke Saxby - Foreman, Plating Shop
Telephone:0208 589 1900 Fax: 0208 589 1901
Email :[email protected]
Web: www.ltlgs.com
Lufthansa Technik Landing Gear Services Ltd provides independent overhaul and repair
services for Aerospace Landing Gear and components to airlines and repair agencies
December 2017
worldwide.
LVH Coatings Ltd
Chelmsley Works, Station Road, Coleshill, Birmingham, B46 1HT
Contact: Mr Peter Hope-Technical Director
Telephone: 01675 466888 Fax: 01675 466260
E-Mail: [email protected]
Web:www.lvh-coatings.co.uk
Manufacturer and supplier of electrophoretic paint products and processes from decorative
lacquers to high performance coatings including photoresists, low friction, nanocomposite hard coatings etc. Consultancy and customised systems are our speciality.
MacDermid Ltd
198 Golden Hillock Road, Small Heath, Birmingham, B11 2PN
Contact: Mr Paul Bray
Telephone: 0770814050 Fax: 0121 606 8300
E-Mail: [email protected]
Web: www.macdermid.co.uk
MacDermid is the UK subsidiary of Macdermid Inc and was formed by the merger of
MacDermid GB and W M Canning. The MacDermid group of companies is now the largest
supplier of electrochemistry in the world with a vast customer base that includes many of the
worlds leading companies. MacDermid supplies speciality chemicals and processes for
decorative and functional plating, mechanical plating, plating on plastics, lacquering, and jig
coating, vibratory finishing and pretreatment. The entire MacDermid group is renowned for its
expertise and leading edge technology products supplied into the printed circuit industry
worldwide and the UK is no exception. The MacDermid philosophy of providing a complete
proactive technical after - sales service and to supplying the most cost effective
technologically advanced processes available continues to be one of the basic concepts within the company.
Magnesium Elektron Ltd
Rake Lane, Swinton, Manchester, M27 8BF
Contact: Mr Martyn Alderman-Director of Technology
Telephone:0161 911 1281 Fax : 0161 911 1030
E-Mail: [email protected]
Web: www.magnesium-elektron.com
Magnesium Elektron is a dedicated service organisation specialising in the development,
manufacture and supply of Magnesium products and services to technology industries
worldwide. Products include: sheet, plate, extrusions, bar, powders.
The Manufacturing Technologies Association
62 Bayswater Road, London, W2 3PS
Contact: Mr Adrian Sell - Business & Events Manager
Telephone: 0207 298 6400 Fax: 0207 298 6430
E-Mail: [email protected]
Web: www.mta.org.uk
The MTA is a trade body for companies working in the engineering manufacturing sector.
Member companies are mainly involved in manufacturing or supply of engineering
technology. The MTA delivers the iconic exhibition focused on manufacturing Technology –
MACH (see www.machexhibition.com)
December 2017
Meggitt Control Systems
C3 Swallow Road, Coventry, CV6 4QY
Contact : Mr Daniel Irwin
Telephone : 024 76294 215
E- Mail: [email protected]
Web: www.dunlop.equipment.com
Metal Finishing Association Nasik
F-33/34 MIDC – Ambad, Nasik, India, 422010
Contact: Dr Ashish Kulkarni
Telephone: +91 253 2382134
E-mail: [email protected]
Professional Institute in India
Metallics Ltd
Unit 7, Sparkbrook Street Workshops, Sparkbrook Street, Coventry, West MidlandsCV1 5ST
Contact: Mr David Meacham-Director
Telephone:02476 633229 Fax: 02476 252200
E-Mail: [email protected]
Metallics provide electroplating for Aerospace, Defence and Formula 1. Quality approvals
include AS/EN 9100 & BS EN ISO 9001:2000. Processes include Silver, Copper, Nickel,
Electroless Nickel, Tin Plating & passivation of Stainless Steel.
Metalor Technologies (UK) Ltd
74, Warstone Lane, Birmingham, B18 6NG
Contact: Mr Mark Parkhurst
Telephone: 0121 262 3088 Fax: 01212363568
E-Mail:[email protected]
Web:www.metalor.com
Metalor Technologies UK Ltd supplies a complete range of processes for precious metal
plating to satisfy the exacting requirements of both the electronics and decorative industries.
In electronics, leading edge technology in the form of the Metgold 2000 series of acid gold
electrolytes provides enhanced distribution characteristics and higher deposition speeds
resulting in significantly lower operating costs. For decorative, there are products designed to
fulfill every conceivable application for precious metal deposition. A wide spectrum of colour
gold’s in the Crownclad 2000 Series and Palladium 2000B, both designed to meet the
requirements for Nickel Free costume jewellery.
December 2017
Mila Hardware
1 Brunel Close, Drayton Fields Ind Est Daventry NN11 8RB
Tel:01327 312 400 Fax: 01327 872 575
Contacts: Paul Pearson - Product Design Manager
Email: [email protected]
Web: www.mila.co.uk
Mila is the UK’s leading distributer of hardware to the fenestration sector. It Supplies
innovative Mila branded products, designed and developed in-house with a focus on British
Standards, sustainable and responsible sourcing or materials, whilst reducing waste of
packaging and going our bit to work towards a carbon neutral future.
More than 10,000 product lines are held in stock at the company’s Northamptonshire HQ for
next day delivery. Mila provides a comprehensive range of support services to customers
including sales and marketing advice, technical support and an in house product Test Centre.
Established in the UK in 1980, Mila also operate in Ireland, Scandinavia and the Baltic States.
It is part of Arran Isle Ltd, which in October 2014 was named as one the UK’s fastest growing
companies in the Sunday Times’ Top Track 250 list.
Moss Metal Finishing Ltd
Units 9 & 14, Brow Mills Industrial Estate, Brighouse Road, Hipperholme, Halifax, West
Yorkshire, HX3 8EF
Contact: Mr Philip Hopkins-Managing Director
Telephone: 01422 203527 Fax: 01422 205857
E-Mail:[email protected]
Web:www.moss-metal-finishing.co.uk
Anodising, colours. Anodising, hard. Chemical Blacking of steel. De-embrittling. Zinc
plating, clear or colour passivation
Nicholsons Sealing Technologies Ltd
Amos Drive, Green Croft Industrial Park, Stanley, County Durham, DH9 7YE
Contact: Mr Nicholas Green - Managing Director
Telephone: 01207 523 010 Fax: 01207 523 011
E-Mail: [email protected]
Web: www.nicholsons.co.uk
Nicholsons produce precision metal seals and components for aerospace, automotive and
nuclear OEM’s. Accredited to ISO9001/AS9100/TS16949 and NADCAP(heat treatment, non-
conventional machining, welding & plating) –they electroplate silver, zinc & nickel .
embrittling. Vibratory finishing trough or bowl machine.
NMB – Minebea UK Ltd
Doddington Road, Lincoln, LN6 3RA
Contact: Mr Jason Woodhouse Laboratory Manager
Telephone:01522 500933 Fax: 01522 500976
E-Mail: [email protected]
Web: www.nmb-minebea.com
NMB lead the market place for landing gear bearings, suspension bearings and tram coupling
bearings worldwide. NMB are supplying programmes including Airbus A380, A350 and Boeing
787.
Oil & Colour Coatings Association
The Oval, 14 West Walk, Leicester, LE1 7NA
December 2017
Contact: Mr Keith Dobell - President
Telephone: 0116 257 5488 Fax: 0116 257 5499
E-Mail: [email protected]
Web: www.occa.org.uk
A technical and professional members association comprising individual, qualified persons
employed in, or associated with, the world-wide surface coatings industries.
PEXA Ltd
Springwood Business Park, Burrwood Way, Holywell Green, West Yorkshire HX4 9BJ
Contact: Mr Jim Rowbotham- Managing Director
Telephone: 01422 314400 Fax: 01422 314401
E-Mail: [email protected]
Web: www.pexa.co.uk
PEXA is a supplier of high technology materials to the aerospace and defence industries.
These products include surface finishing materials, aircraft maintenance products, application
equipment and unique packaging solutions.
Phoenix County Metals Ltd
Great Central Way, Woodford Halse, Daventry, Northants, NN 11 3PZ.
Contact: Mr Paul Johnson-Managing Director
Telephone: 01327 260581 Fax: 01327 261682
E-Mail:[email protected]
Web:www.pcm-ltd.
Precious Metal Reclaimers to the Electroplating, Electronic, Printed Circuit, Jewellery and Chemical Industries. Fully licensed, ISO 9001 & 14001. In house processing and analysis.
Photofrabrication Ltd
14 Cromwell Road, St Neots, Cambridgeshire PE19 2HP
Contact : Mr Tom Pounds – Technical Director
Telephone: 01480 222261 Fax : 01480 222261
E-Mail: [email protected]
Web: www.photofab.co.uk
Manufactures of bespoke metal components through photochemical etching/milling, metal
finishing and forming. Our finishing services currently include electroplating, chemical
blackening, electrophoretic painting and various types of spray coating.
PMD (UK) Ltd
Broad Lane, Coventry, CV5 7AY
Contact: Mr Christopher Durrant-Director of Business Development
Telephone: 02476 466691 Fax : 02476 473034
E-Mail : [email protected]
Web: www.pmdgroup.co.uk
One of the UK’s longest established companies specialising in the supply of chemical systems
December 2017
and plating services to the metal finishing, electronics and pcb industry. Offering both
precious, gold & silver, and non-precious electroplating services along with proprietary
chemical processes.
Poeton Industries Limited
Head Office: Eastern Avenue, Gloucester, GL4 3DN
Contact: Dr John Archer
Telephone: 01452 300500 Fax: 01452 500400
E-Mail:[email protected]
Web:www.poeton.co.uk
Our two UK plants offer over 80 different treatments with expertise in nickel, hard chrome,
hard anodising, thermal spray and our own unique Apticote range of advanced plating
processes and coating technology. Aerospace, Defence, Nadcap, AS9100C and BSI approvals
are complimented by full approval to process for some of the worlds most renowned
companies. We have comprehensive R & D facilities at all sites including chemistry,
metallurgy, microscopy, wear and corrosion testing. Poeton also have a JV treatment
business in Singapore and Malaysia called ATC Poeton that offers a similar wide range of
coatings to the South East Asia region and is Nadcap approved.
Posh Totty Design
Unit E Level 7, New England House, New England Road, Brighton. BN1 4GH
Contact: Alice Rivers-Cripps
Telephone: 01273 202044
E-Mail: [email protected]
Web: www.poshtottydesigns.com
The original hand-stamped jewellery company, Posh Totty Designs specialise in personalised
jewellery. Lovingly hand-crafted in silver with options for gold plating, each piece is truly
unique to its wearer
PRA Ltd
14 Castle Mews, High Street, Hampton, Middlesex TW12 2NP
Contact: Peter Collins-Technical Director
Telephone: 0208 4870800 Fax: 0208 4870801
E-Mail:[email protected]
Web:www.pra-world.com
PRA is one of the world's leading research and technology service providers for the coatings
industry. Our well equipped and UKAS accredited laboratories offer an independent and
impartial testing and analytical service. Experienced consultants can advise on re-coating,
paint failure and environmental problems. We run an extensive training course programme
and hold several international conferences each year.
Pre-Treatment Solutions Ltd
11 Central Avenue, Coventry, CV2 4DN
Contact: Mr Barry Clements-Director
Telephone: 02476 452299 Fax: 02476 650311
E-Mail: [email protected]
Web: www.pretreatmentsolutionsltd.com
Pre-treatment solutions ltd is a manufacturer of unique chemistry for industrial and
agricultural applications. Phosprep 971T multimetal pretreatment and Phosprep 920 dry in
place chrome free technology are established approved systems for use in pretreatment
December 2017
powder coating systems.
Pre-Treatment Technologies Ltd
The South Bank, Stubbing Wharf, Hebden Bridge. HX7 6LU
Contact: Graeme Reid - Director
Telephone: 01422 847671 Fax: 01422 843854
E-mail: [email protected]
Web: www.pretreat.co.uk
Our company is dedicated to the supply of specialty chemicals for manufacturing industry.
Products are produced within a facility which is ISO 9001-2000 approved. We formulate and
technically support our chemical systems.
Protech Finishing Ltd
97-98 Bunting Road, Northampton, NN2 6EE
Contact: Mrs Mandy Daley-Director
Telephone:01604 792163 Fax: 01604 718558
E-Mail: [email protected]
Web: www.protechfinishing.co.uk
A specialist anodiser and electroplater offering hard, sulphuric and chromic anodising, in a full
range of colours, Alocrom, gold, silver, zinc, nickel, tin, copper and electroless nickel plating.
RAMP SURFACE COATINGS LTD
20 Garrett Road, Lynx Trading Est, Yeovil, Somerset BA20 2TJ
Contact: Mr Alex Evans – Head of Metal Finishing
Telephone : 01935 847308
E- Mail : [email protected]
Web: www.rampsurfacecoatings.co.uk
We have our own in house Paintshop, Anodise, non Hexavalant and Hexavalant chemical
conversion coating facility, accredited to NAPCAP and AS9100 standard supporting the
aerospace and defence industry.
RAPRA Ltd
Business & Technology Centre, Priorslee Campus, University of Wolverhampton, Telford,
TF2 9FT
Contact: Mr Steve Shaw - Executive Director
Technical enquiries: 0845 094 1919 Direct: 01952 288366
E-Mail: [email protected]
Web: www.rapralimited.org
RAPRA fosters Global Polymer Innovation by promoting and assisting with Rubber, Plastics
and any other natural or synthetic Polymer Research and Development. Using links to
government agencies, universities, technical service providers and training organisations, the
Association acts as a single high quality focal point for those looking to improve existing
products, or develop and commercialise innovative new ones that incorporate polymers.
Established in 1919, RAPRA is a not-for-profit organisation that has a duty and responsibility
to provide independent and impartial services to help member companies succeed.
Riley Industries Ltd
A trading name of Riley Industries Ltd
December 2017
Redhouse Industrial Estate, Middlemore Lane West, Aldridge, West Midlands, WS9 8BG,
Contact: Mr Michael Riley-Managing Director
Telephone: +44 (0) 1922 458000 Fax: +44 (0) 1922 458001
E-Mail: [email protected]
Web: www.rileysurfaceworld.co.uk
Quality used and reconditioned equipment. No long delivery dates. Extensive stocks available
in our showroom and warehouses. Ultrasonic Cleaners: Degreasers: Dust/Fume Extractors:
Ovens: Chillers: Polishing: Vibratory Finishing: Rectifiers: etc.
Russell Laboratories Ltd
Austin House Units A-C, Wotton Road, Kingsnorth Ind Estate, Ashford, Kent, TN23 6LN
Contact: John Tolliday – Works Manager
Telephone: 01233 635241 Fax: 01233 61960
E-mail: [email protected]
Web: www.russell-labs.co.uk
Technical surface engineering, including Electroless nickel, Sulphamate Nickel, Zinc Nickel,
Zinc Cobalt, Cadmium, Silver, Gold, Rhodium and Copper. ISO9001 2008
AS9100 Rev C. Technical Enquiries Welcome.
Safran Landing Sytems UK Ltd
Cheltenham Road East, Gloucester, GL2 9QL
Contact: Joanne Dunford – Environmental & Process Chemist
Telephone:01452 716612 Fax: 01452 716610
E-Mail: [email protected]
Web: www.safranmbd.com
A dedicated "one stop shop" sized to handle Airbus and Boeing landing gear components.
Processes include cadmium, nickel sulphate and hard chrome plating and passivation of
stainless steel. Complies with ISO 14001 standards.
SAMFA
PostNet Suite 39, Private Bag X3,Plumstead, 7801, South Africa
Contact: Tony van der Spuy
Telephone: 0027 21 761 8537
E-mail: [email protected]
Web: www.samfa.org.za
SAMFA is an association for metal finishing companies in South Africa. Our mission is simply
"To provide a forum for the promotion and advancement of the metal finishing industry in
South Africa"
Schloetter Company Ltd
Abbey Works, New Road, Pershore, Worcs, WR10 1BY
Contact: Mr Paul Griffiths –Sales & Technical Director
Telephone: 01386 552331
E-Mail: [email protected]
Web:www.schloetter.co.uk
With a network of manufacturing and distribution companies in Europe and in the Far East,
plus long established agencies throughout the world, Schloetter has pioneered the
development of high technology plating processes, automatic plating plant and computerised control equipment for use in the finishing industry.
December 2017
Seagate Technology
1 Disc Drive, Springtown Industrial Estate, Londonderry, Northern IrelandBT48 0BF
Contact:
Telephone:02871274508
E-Mail: [email protected]
Web:www.seagate.com
Seagate is the world wide leader in design, manufacture and marketing of hard disc drives,
providing products for a wide range of Enterprise, Desktop, Mobile Computing and Consumer
Electronic Applications. At Seagate's Springtown facility , state-of-the-art plating techniques
are used in the development and manufacture of recording heads-the drive component that
writes information onto and reads information from the recording disc.
Serfilco International Ltd
Siemens Road, Northbank Industrial Estate, Manchester, M44 5AH
Contact: Mr Rob Sawyer
Telephone: 0161 775 1910 Fax: 0161 775 3696
E-Mail:[email protected]
Web:www.serfilco.com
SERFILCO® International is a global supplier of liquid handling equipment for chemical,
surface finishing and other wet process applications. Headquartered in Manchester since its
inception in 1972, SERFILCO® has developed an enviable worldwide reputation for quality
and innovation. SERFILCO® are specialists in the design, manufacture and distribution of
corrosion resistant pumps, filters, filter media and agitation systems. The company
continues to bring products to the market place to enable chemical processors to improve
quality, save money, achieve operator compliance and protect the environment. With
facilities in the UK, US , Canada, Germany, France and China SERFILCO® is committed to
live up to its mantra to offer:-“GLOBAL PRODUCTS, LOCAL SERVICE AND ADVICE YOU
CAN RELY ON”
Shanghai Electroplating Association
No 960 Xhong Xing Road, Shanghai, China200070
Contact: Wang Guo Xiang
Telephone:86-21-56323290
E-Mail: [email protected], [email protected]
Web: www.shea.cn
The Shanghai Electroplating Association acts as a linkage between Government and the
plating industry members supporting them in order to obtain legitimate approval and
communicate with each other.
Siebec UK Ltd
Unit 3, St Albans Business Park, St Albans Road, Stafford, ST16 3DR
Contact: Mr Neal Davies – General Manager
Telephone: 01785 227700 Fax: 01785 246006
E-mail: [email protected]
Web: www.siebec.com
A leading manufacturer of PUMPS and FILTERS to the Electroplating & Metal Finishing
industries worldwide, with filters for the smallest 30 litre plating tanks up to the very
largest. SIEBEC is the original developer of the Air-Less™ Pumped Agitation System as the
effective alternative to air agitation and the now universal PUSH-PULL™ technique initially
developed for the largest tanks. SIEBEC UK also offer the low cost Aquafiltre® range of
filtration & treatment equipment. ISO9001 approved.
December 2017
Silchrome Plating Ltd
Barras Garth Road, Leeds, LS12 4JW
Contact: Mr Austen Thwaite-Managing Director
Telephone: 0113 263 7808 Fax: 0113 263 2382
E-Mail: [email protected]
Web: www.silchrome.co.uk
Silchrome Plating provides a comprehensive range of finishes-full details are on website.
ISO9001:2008 and ISO14001:2004 approved, services include chrome, nickel, zinc, copper
and silver as well as other processes.
Singapore Surface Engineering Association
c/o 190 Middle Road, # 19-05 Fortune Centre, Singapore, 188979 Contact: Mr Stewart J Hemsley-Global Research and Development Manager (Plating), Metalor
Technologies Pte Ltd (Singapore) Telephone:0065 6897 8920 Fax: 0065 6863 0102
E-Mail: [email protected]
Web:www.aseansurfin.org
The Singapore Metal Finishing Society was founded in November 1981 with the mission to
promote the development of the local electroplating industry. It was renamed the Singapore
Surface Finishing Society (SSFS) in 1992. In 1994, we included PCB manufacturing as an
integral part of our activity and admitted PCB manufacturers as members. Today, the Society
represents the interests of some 100 companies in the surface finishing community. It counts
contract platers, surface finishers, suppliers of chemicals/equipment/technology, academics
and PCB manufacturers as its members. To meet members’ various needs, the Society
organizes a wide spectrum of activities every year. These range from specialised courses,
conferences, seminars and dialogues with government agencies to overseas business
missions. The Society is currently a member of the International Union of Surface Finishing
(IUSF) and a Sustaining Member of the Institute of Metal Finishing, UK. The Society has a
Memorandum of Understanding (MOU) with the Association of Electronics Industries in
Singapore (AEIS) and is an Association Member of the Singapore Manufacturers Federation
(SMa). It changed its name in 2009 to Singapore Surface Engineering Association (SSEA).
SKF (UK) Ltd
Aerospace Division, Strode Road, Clevedon, North Somerset,BS21 6QQ
Contact: Richard Reynolds-Quality Engineer
Telephone:01275 876021 Fax :01275 878480
E-Mail: [email protected]
Web:www.skf.co.uk
SKF manufacture high performance self-lubricating plain bearings. Applications include fixed
wing aircraft and helicopters, airframe and flight control systems, racing cars, mass transit
vehicles and many other markets.
Society of Motor Manufacturers and Traders Ltd
71, Great Peter Street, London, SW1P 2BN
Contact: Mrs Premila Glover_ Automotive Components Section Manager
Telephone: 0207 235 7000
Fax : 0207 235 7112
E-Mail : [email protected]
December 2017
Web: www.smmt.co.uk
The Society of Motor Manufacturers and Traders Ltd (SMMT) is the trade association for the
UK automotive industry. It supports and promotes the interests of the UK automotive
industry at home and abroad.
Stainless Plating Ltd
24 Don Road, Sheffield, S9 2UB
Contact: Mr Lee Grant-Commercial Director
Telephone: 0114 242 2000 Fax: 0114 243 2630
E-Mail:[email protected]
Electro-platers and metal finishing. ISO9002, CAA, BAe and others. Chromic and sulphuric
anodising, copper, nickel, chrome, silver, cadmium, zinc, tin, stainless steel, chemical
blacking and passivating, phosphate, chromate, blasting.
Surface Engineering Association
Federation House, 10 Vyse Street, Birmingham, B18 6LT
Contact: Mr David Elliott-Chief Executive
Telephone: 0121 237 1123 Fax: 0121 237 1124
E-mail: [email protected]
Web:www.sea.org.uk
The SEA represents over 450 companies with a combined T/O in excess of £1billion and
employing more than 10,000 people. The scope of the membership within the constituted
group of Trade Associations under the umbrella of the SEA covers an enormous range of
surface engineering technologies and processes. The SEA functions as the industry forum
where issues of health, safety. the environment, training, best practice initiatives and
marketing can be debated and acted upon. The SEA also acts as the focal point for contact for the industry on matters of legislation and Government support for all sponsored activities.
Surface Technology Coventry
Godiva Place, Coventry CV1 5PN
Contact: Andrew Courtney-Director- Surface Technology Coventry
Telephone: 02476 229373 Fax: 02476 633411
E-mail: [email protected]
Web: www.surfacetechnology.co.uk
Norman Hay plc is a global chemicals, sealants, surface coatings and engineering group with
over 60 years’ trading history. Headquartered in the UK, the group operates four main
divisions: Ultraseal, the market leader in impregnation chemicals and process equipment;
Surface Technology, specialists in the development and application of surface treatments
with well-known brands including Armourcote, TriCem and ACI; SIFCO ASC, global leaders in
selective plating; NHE, manufacturers of bespoke process plant and equipment.
We specialise in providing engineered surface coatings for industry that provide corrosion
protection, wear resistance and low friction properties and have the technical knowledge and
expertise to develop coating solutions to our customers’ individual requirements. Our services
also include the design, build, supply and management of process plant worldwide.
December 2017
SWMF EIC Finishing Services
Alphinbrook Road, Marsh Barton, Exeter EX2 8TJ
Contact: Mr Kevin Baker - Director
Telephone : 01392 258234
E-Mail : [email protected]
Web: eicgroup.co.uk
T E Connectivity
Faraday Road, Dorcan, Swindon, Wiltshire, SN3 5HH
Contact: Mr Matthew Stubbs – Industrial Engineer
Telephone: 01793 572185 Fax: 01793 572209
E-Mail: [email protected]
Web: www.te.com
Aerospace raceways for commercial aircraft
Technetix Ltd
Communications House, Edward Way, Burgess Hill, West Sussex, RH15 9TZ
Contact: Mr Paul Chapman-R & D Manager
Telephone: 01444 251200
E-Mail: [email protected]
Web: www.technetix.com
Technetix has developed a unique perspective on broadband technologies and the plated and
painted finishes on our equipment are integral to their performance.
We focus on becoming a technology partner to our customers, providing each with solutions
designed to evolve the performance of their network while driving down costs.
Teer Coatings Ltd, Miba Coating Group
West Stone House, Berry Hill Industrial Estate, Droitwich, WR9 9AS
Contact: Sue Field-Senior Researcher
Telephone: 01905 827550 Fax : 01905 827551
E-Mail: [email protected]
Web: www.teercoatings.co.uk
Teer Coatings offer PVD coatings and deposition equipment. Coatings include TiN, CrN and
the low friction, wear resistant coatings MoSTTM , Graphit-iC TM and Dymon-iC (DLC). Bespoke
coatings can also be developed.
Texturing Technology Ltd
PO Box 22, Port Talbot, SA13 2YJ Contact: Mr Paul Burke-General Manager
Telephone: 01639 872197 Fax: 01639 872196
E-Mail: [email protected]
Texturing Technology Ltd provides hard chromium plating and state of the art electro
discharge texturing (EDT) surface technologies to the reduction rolling industry.
The Royal Mint
Llantrisant, Pontyclun, Mid Glamorgan, CF7 48J
Contact: Mr Mathew James-Process Manager
Telephone: 01443 222111 Fax: 01443 623499
E-Mail: [email protected]
Web:www.royalmint.com
December 2017
The Royal Mint is responsible for the production of coins for the United Kingdom and
Overseas customers. It also produces military and civilian decorations, commemorative medals and Royal and official seals.
The Wheel Specialist
205 Tyburn Road, Erdington, Birmingham B24 8NB
Contact: Ginny Murphy
Telephone: 01564 785 826 Fax: 01564 783 167
E-Mail: [email protected]
Web: www.thewheelspecialist.co.uk
Having started life in Birmingham 1955, we offer a range of wheel based services for motor
vehicles including alloy wheel refurbishment and customization including powder coating and
cosmetic repairs.
Thomas Keating Limited
Daux Road, Billingshurst, West Sussex, RH14 9SH
Contact: Mr Simon Paul Croucher
Telephone: 01403 782045 Fax: 01403 785464
E-Mail: [email protected]
Web: www.terahertz.co.uk
A Queen’s Award winner, Thomas Keating Ltd provides an electroforming service in Copper
and Nickel for the microwave and physics industry, making waveguides and RF screening
devices from 2 to 1000 GHZ. Support services include gold and silver plating, metal finishing, full CNC machining facility and HFSS analysis, to ISO9001:2008 Part 1 Standards.
TSSEA
38, Lawford Lane, Bilton, Rugby CV22 7JP
Contact: Dr Andrew Cole-Secretary
Tel: 08448 046898 Fax: 08448 046899
E-Mail: [email protected]
Web: www.tssea.org
Promotion of the use and development of Thermal Spraying and other Surface Technologies.
Provision of a Technical Service, conferences and publications. Encouragement of education
and CPD within industry sector. Involvement in Euro / International Standards on topics
relating to Thermal Spraying.
Turbex Ltd
Unit 1, Riverwey Industrial Park, Newman Lane, Alton, Hants, GU34 2QL
Contact: Mr John Huntingdon - Managing Director
Telephone: 01420 544909
E-Mail: [email protected]
December 2017
Web:www.turbex.co.uk
Turbex offers the widest range of aqueous cleaning technology including spray wash,
ultrasonic and precision cleaning with rotation, together with all the necessary ancillary items.
They will advise on the optimum process to suit any application.
Finishing Magazine published by:- Turret Group Ltd
173, High Street, Rickmansworth, Herts, WD3 1AY
Contact: Mr John Hatcher
Telephone: 01923 692660 Fax: 01923 692679
E-Mail:[email protected]
Web:www.turretgroup.com
Finishing is the bi-monthly magazine for surface engineering professionals in Trade Finishing
houses and Manufacturing companies.
For almost thirty years, Finishing has kept readers in touch with trends and developments in
all aspects of surface engineering including pretreatments, all deposited coatings and paint.
It is the only independent Finishing magazine in the UK backed by an international media
group. The Turret Group Ltd portfolio includes market leading trade magazines, directories
and exhibitions.
Twickenham Plating Group Ltd
7-9, Edwin Road, Twickenham, Middlesex TW1 4JJ
Contact: Jonathan Hill-Managing Director
Telephone: 0208 744 1800 Fax: 0208 744 2001
E-Mail: [email protected]
Web:www.twickenham.co.uk
Twickenham Plating provides specialist plating services (including gold, silver, palladium,
palladium nickel, nickel, high and mid phosphorous electroless nickel, tin, zinc cobalt, zinc
nickel and chromate conversions) for the electronic, automotive and aerospace industries,
world wide. Hitech R2R technology and loose piece selective plating machines are developed in house. ISO 9001:2008 & ISO14001:2004 registered.
Tyco Electronics UK Ltd
4 Stanier Road, Castleham Industrial Estate, St Leonards-on-Sea TN38 9RF
Contact : Mr Philip Holman – Plating Shop Manager
Telephone: 01424 857113
E-Mail: [email protected]
Web: www.te.com
Deutsch UK manufacturers interconnection solutions products and are well proven in the Civil
Aerospace, Defence, Industrial, Transportation and Autosport markets, being used in
numerous applications from Formula 1 racing cars to military aircraft. Deutsch UK has
ISO4001 accreditation and within the scope of their manufacturing operations has a large
variety of processes in their plating department.
Vilnius Centre for Physical Sciences & Technology
Gostauto 9, Vilnius, Lithuania, LT-01108
Contact: Rimantas Ramanauskas - Deputy Director
Telephone: +3705 264 8844 Fax: +3705 264 9774
E-Mail: [email protected]
December 2017
Web: www.ftmc.lt
The State Budget Institution carrying out investigations of electrochemical, catalytic and
sorption processes in solutions, materials science and metal corrosion, environmental
chemistry, synthesis and research of organic compounds.
Walton Plating Ltd
Sir Richards Bridge, 118 Ashley Road, Walton-on-Thames, Surrey, KTl2 1HN
Contact: Mr Mike Koskela-Managing Director
Telephone: 01932 221206 Fax: 01932 246699
E-Mail:[email protected]
Web:www.waltonplating.co.uk
A NADCAP approved specialist surface treatments Company offering NDT, Electroplating,
Anodising and wet paint finishes. Treatments include; Magnetic and Penetrant Flaw Detection,
Hard Chrome, Cadmium, Nickel, Copper, Silver, Chromic & Sulphuric Anodising, Hard
Anodising, Chromate Conversion, Epoxy, Polyurethane and dry film lubricants.
Waveform (Electroforming) Ltd
26 Meteor Close, Airport Industrial Estate, Norwich, Norfolk, NR6 6HR
Contact: Mr John Dye-Managing Director
Telephone: 01 603 418691 Fax: 01 603 418691
E-Mail: [email protected]
Web:www.electroform.co.uk
Manufacturers of custom designed electroformed waveguide and RF screening devices.
Support services include precious metal finishing and full machining facility.
Wedge Group Galvanizing Ltd
Stafford Street, Willenhall, West Midlands, WV13 1RZ
Contact: Mr Bob Duxbury - Technical Director
Tel 01902 630311 Fax: 01902 603173
E-Mail:[email protected]
Web:www.wedge-galv.co.uk
Wedge Group Galvanizing is the UK’s largest galvanizing company. With 14 plants across the
UK we offer a truly national service. We can process anything from a 1.5mm thick plain
washer to 29m structural beams. Our plants are designed and equipped to set industry-
leading standards for sustainability and low environmental impact.
Wheelabrator Group Ltd
107-109 Whitby Road, Slough, Berks, SL1 3DR
Telephone: 01753 215 673 Fax: 01753 215 670
Contacts: Chris Pallot-Business Development Manager
E-Mail: [email protected]
Web: www.wheelabratorgroup.com
Global provider of surface preparation machines and specialist sub contract controlled shot
peening and glassbead finishing, correction, forming and saturation fatigue enhancement
shot peening.
Wychwood Water Systems Ltd
Unit K, Country Park, Avenue Two, Station Lane, Witney, Oxford, OX28 4YD
Contact: - Mr Peter Wood - Director
Telephone: 01993 892211 Fax: 01993 892212
E-Mail: [email protected]
Web: www.wychwood-water.com
December 2017
We manufacture a complete range of Ionmaster deionisers, reverse osmosis and exchange
deionising and media cylinders. We undertake complete turn-key projects to provide
deionised water and rinse water recycling.
Wymark
Runnings Road Industrial Estate, Cheltenham, Gloucestershire GL51 9NQ
Contact: Melvyn Dane
Telephone: 01342 520 966
E-Mail: [email protected]
Web: www.wymark.co.uk
