STARLINE TRACK BUSWAY IN THE DATA CENTER POWER WHERE YOU NEED IT

SUSTAINABLE DATA CENTRE DISTRIBUTION POWER DESIGN ADVANTAGES - STARLINE INTRO BY EDWARD HAHN, JPE, SINGAPORE

STARLINE TRACK BUSWAY

• This selection of photos and information discusses the advantages of Starline in the Data Centre.

• The impact is great in the advancement of electrical distribution and the affects and effects of the operation the Data Centre, impacting both Electric and Air services.

• Flexibility: add/remove circuits in minutes

• LIVE PLUG INLIVE PLUG IN: add/remove circuits without de-energizing load

• Remove under floor cable air dams & reduces bypass

airflow problems of cable access holes (brushes, grommets' etc)

• Eliminates many problems associated with power and Air distribution

Benefits of Track Busway

BOTTOM LINE - ELECTRICAL• Safe to use, Hot swappable (plug & play) Adjust your equipment on “live”

system with the maintenance-free Starline designs

• Speeds up distribution changes from one setup to the next. Significant Cost Savings to:- Material and labor (Huge advantage during actual usage)

• No bolted joints, does not loosen even if shaken. Maintenance-free.

• Greatly increases the security for your data center. Starline decreases the need for outsiders to enter your secure data center for “routine” upgrades.

JPE

• Flexibility that will virtually eliminate costly changes and delays for new arrangements

• Huge benefit of system design. Can adapt to temperature changes, moderate vibrations and not require maintenance. Patented conductor design eliminates the loosening of joints.

• Housing conductor joints and plug-in electrical connections can not loosen.

• Green [Scalable, Reusable]

Bottom Line - Electrical

BOTTOM LINE – AIR FLOW AND COOLING

• Starline provides a stable and consistent operation platform for the HVAC platform - Whether overhead are under the raised floor, no abandoned wires to create future

blockages to your air flow

• Designed for 40 degree C operation, Starline can be mounted in the hot or cold aisle of containment designs, overhead or underfloor.

• Stable air flow to your servers because the space utilized is known upfront and the airflow design will not be impacted with the changes to the plug-in arrangements

• Following the initial AC deployment, the impact of heat exchange efficiency loss is not impacted by Starline.

- The 15 to 25% efficiency loss of this heat transfer capability of the DX, Chiller and CRAC units over time, must be forecast in the initial sizing of the units. Starline helps eliminate

some of the random variables affecting the future cooling circulation requirements.

JPE

• Structured Power. All products have strengths and weaknesses. Of Starline’s many strengths – The most important is the reliability of the Joint construction. Starline has never had a loose joint on this system.

• Connections Heat Rise tested and rated for 40 deg. C continuous duty cycle.

• Starline Track Busway and all components are easy to:

• Install

• Expand

• Relocate

• Reconfigure

• Sustainable

These unique features make Starline Track Busway one of today’s most “Green” electrical products

ABOUT STARLINE TRACK BUSWAY• Continuous Access, Finger-Safe Aluminum Housing, Copper

Conductors

• 40A up to 800A, 600V - IEC and UL Listed

Typical Configuration

JPE

U-Shaped busbars

Extruded Aluminum Housing

Insulators that surround the busbars and provide a UL Listed “finger safe” product.

Continuous open bottom

About the Track Busway

225A Version Shown

JPE

STARLINE CRITICAL POWER MONITORING

End feed unitMonitoring

unitPlug-in unit(no display)

Plug-in unit(with display)

Calibration for accuracy within 1% to meet ANSI Revenue Grade Standards

ModBus, Ethernet or Wireless connectivity

Metering

• Wireless communications

• Large color touchscreen

• SNMP communications

• Flexible Utilities – the ability to change, adjust by reusing the existing system for future changes

• Production Power, clean, consistent, available where and when required

•Mission Critical Power for Clean, Consistent, Maintenance-free Operation of your equipment.

• Modern electrical system designs

Flexible Utilities

JPE

Metering

• Wireless communications

• Large color touchscreen

• SNMP communications

Plug-In Tap-Off Units with IEC 60309 Outlets Plus Integrated CPM

Modbus RTU Communication Applications

T5E40 Series Enclosure with Lockable Finger Shroud and M20

CPM

T5E40 Series Enclosure with Lockable Finger Shroud and M20

CPM

E28 Series Enclosure and M22 CPM

E28 Series Enclosure and M22 CPM

E25 Series Enclosure and M22 CPM

E25 Series Enclosure and M22 CPM

Plug-In Tap-Off Unit with Drop Cord Plus Integrated CPM

Wireless Mesh Network Communication Applications

T5E41 Enclosure with Phase Selector Switch, Lockable Finger Shroud, IEC 60309 Drop Cord and integrated M25 Wireless CPM – 1

Phase

T5E41 Enclosure with Phase Selector Switch, Lockable Finger Shroud, IEC 60309 Drop Cord and integrated M25 Wireless CPM – 1

Phase

T5E41 Enclosure with Lockable Finger Shroud, IEC 60309 Drop

Cord and integrated M25 Wireless CPM – 3 Phase

T5E41 Enclosure with Lockable Finger Shroud, IEC 60309 Drop

Cord and integrated M25 Wireless CPM – 3 Phase

COMPARISONS TO OTHER BUSWAY

SYSTEMS

STARLINE

FEW PARTS

EASY ASSEMBLY

NEVER LOOSEN

Fast installation with few parts and reliable connections

Housing Coupler

Housing Section

Rigid blade that connects to conductors

Installation Tool

• No bolts through the conductors with Starline.

• The conductor clamping is eliminated with Starline

• Conductors are connected into a preformed U shaped channel and rigid copper blade that functions like a knife switch design

• Starline conductors will never loosen

• The plug-in unit attaches the same way. A rigid blade turning into the U-shaped conductor.

• Housing coupler provides structural strength to connect two housings together.

STARLINE BUSWAY SIMPLY STAB-IN JPE

• Abutt the two housing ends. • Offset for the copper and use the

installation tool to install the copper into the conductor, by rotating the handle

• Then slide the housing coupler across the joint and tighten into place.

Mechanical Spring Pressure Connection Principal

• Flexible , Reliable, Modular, Ease of installation and Promotes better operational performance

• Creates a maintenance-free connection.

Stab on Plug-In Paddle or Male end of busbar

U-Shaped Copper Conductor throughout busway length

Starline Track Busway

• Improving the Design and Performance of the Infrastructure

• The ability to accelerate the changes without creating errors has huge advantages

• Introducing systems that have beneficial performance and eliminate the maintenance difficulties and warranty issues.

To Be or Not To Be . . . Do decisions create honey or do you get stung?

JPE

Starline is a fabulous electrical system.

• The savings, realized by the user, comes in having an electrical system capable of continuous improvements that lowers the operating costs. It is adaptable to the ever changing electrical requirements of the user.

•Try it you’ll like it.

JPE

Available through Internationally Approved Resellers For Information on Starline please contact:

JPE Jelph Power Equipment Co. Pte Ltd, 11th Floor, Wisma Atria, 435 Orchard Road, Singapore 238877Contact: Edward Hahn65-9005-8214ed.hahn@jelphpowerequipment.com

Thank-You !