Sustainability in the Aluminum Industry in North America Presentation for NAM Marshall Jinlong Wang...
-
Upload
reese-collen -
Category
Documents
-
view
214 -
download
0
Transcript of Sustainability in the Aluminum Industry in North America Presentation for NAM Marshall Jinlong Wang...
Sustainability in the Aluminum Industry in North America
Presentation for NAM Marshall Jinlong Wang
July 2013
Contents
• Aluminum Association and Aluminum Products
• Approach to Sustainability• Actions to Sustainability• Future Opportunities
The Aluminum Association
98 Member Companies: 51 aluminum producers and semi-fabricators and 47 technology and service providers
Representing the majority of aluminum product’s value chain including resource extraction, material production and product fabrication
Membership highly diversified with multinational companies, regional players and local small businesses
Goal is to promote the production and use of aluminum as the sustainable material of choice
Characteristics of Aluminum and Products
Strong and light weight Versatile - Can be made into any shapes, sizes, and
gauges to serve any designated functions Rust & corrosion resistance Great thermal and electrical conductor Infinitely recyclable Serving hundreds of millions of people in their daily
life from food and accommodation to mobility and entertainment
Life Cycle of Aluminum
Approach to Sustainability
Triple-Bottom-LineLife-Cycle-Thinking
Sustainability – Step IResearch and Support
Analyzing the industry – quantitative approach Identify trends, challenges and opportunities Lay foundations for benchmarking and future goal
setting Analysis included product analysis and industry
analysis Extensive data survey and information compiling:
life cycle assessment survey, industry sustainability management survey, product use phase survey, recycling survey, etc. – a very slow and painful process
Sustainability – Step IIBenchmark and Continuous Improvement
Set long-term goals and sustainability pathways – voluntary programs Reduce GHG Emissions and other environmental footprints Document and Improve Use Phase Benefits Increase Material Recovery
Promote and monitor progress Keep the material for future generations
Step I Findings
Tremendous progress has been achieved during the past two decades in increasing efficiency and reducing environmental footprints during the production stage. from 1990 to 2010, primary energy demand associated with primary aluminum production
has been reduced 26%. Primary energy demand for aluminum recycling has been reduced 52%
Aluminum applications help society save energy and reduce environmental footprints. Our research found that the energy savings of our products help achieved during the use
phase offset the energy demand during the production phase, making aluminum an energy neutral industry
Aluminum recycling not only help save critical natural resources but also significantly save energy and reduce environmental footprints. Recycling aluminum can save up to 95% of energy demanded for producing aluminum from
bauxite ore. End-of-life aluminum recycling in North America helps save at least 406 trillion
Btu of energy each year
Step I Findings – Continued
Industry voluntary sustainability programs have had significant contributions to the society in reducing the environmental footprint. from 1990, the North American aluminum industry has voluntarily reduced
its PFC (a greenhouse gas) emission intensity of primary aluminum production by 85%.
This is the equivalent of a total of 200 million tons of CO2e elimination over two decades
Leader in using renewable energy among material industries: the share of renewable energy use for aluminum products is the highest among most other common materials – more than 30% in terms of accumulative primary energy demand 75% during the aluminum smelting process
Future Opportunities
Recycling – limited understanding and consistent metal loss during the end-of-
life of some products – estimated at least one million tons of metal loss each year
Product use phase – very limited understanding in terms of what’s exactly happening
during the use time due to the extremely diversified applications as well as the very long life time in use
How can we do better – Constant efficiency improvement versus law of physics– Limited influence for small businesses on their supply chain– Technological breakthrough process takes time
Appendix: Footprints of the Industry
Appendix: Current Voluntary Programs
For more information, please visit:
www.aluminum.org/SustainabilityReport
Questions?
Thank You!