Suspended Ceiling System

8/10/2019 Suspended Ceiling System

1/12

T H E S T R E N G T H W I T H I N

SUSPENDED CEI LING SYSTEMS

MONTREAL TORONTO CALGARY EDMONTON VANCOUVER


2/12

S U S P E N D E D C E I L I N G S Y S T E M S

Bailey Metal Products Limited offers a complete range

of Suspended Ceiling Systems and Accessories for all your

building needs. With offices across the country, Bailey is the

leading manufacturer and supplier of a complete range of

wall and ceiling systems.

The comprehensive design of the Bailey Suspended Ceiling

Systems will accommodate all your ceiling installation require-

ments. These systems, manufactured in aluminum or steel,meet all ULC fire rating requirements. They are versati le and

easy to install.

Bailey Suspended Ceiling Systems incorporate features

such as superior strength, design flexibility, environmental

protection and multiple colour and profile choices for appealing

aesthetics. With easy installation and the wide variety of

products, sizes and accessories, Bailey is your best choice for

suspended ceilings.

Bailey Metal Products Limited has a reputation for

exceptional customer service and is proud to offer quality

building products through our plants across Canada for over

50 years. Should you have any questions about our ceiling

systems, or any other Bailey products please contact the officenear you. Thank you.

EXPOSED SYSTEMS

Lance-Lock System 1800 15/16 Exposed Tee System - Fire-Rated Page 3

Lance-Lock System 900

15/16 Exposed Tee System - Non-Rated Page 4

Shadowline System 800 9/16 Exposed Tee System - Non-Rated Page 5

Lance-Lock System 400 All Aluminum Exposed Tee System Page 6

ENVIRONMENTAL SYSTEMS

Lance-Lock 1400 15/16 Rated System Page 7

Lance-Lock 700 15/16 Class A System Page 7

Lance-Lock 600 916 Class A System Page 7

Accessories and Conversion Chart Page 8

Lance-Lock Punching Detailsand Relocatable System Page 9

Colours and Finishes Page 10

Bailey System Layouts Page 11

Specifications and Installation Requirements Page 12

Bailey offers a wide range of easy to install, low maintenance

and attractive suspended ceiling systems for all applications.

TABLE OF CONTENTS


3/12

L A N C E - L O C K S Y S T E M S

BAILEY LANCE-LOCK SYSTEM 1800 15/16 EXPOSED TEE SYSTEM FIRE-RATED

Bailey Lance-Lock System 1800 exposed tee fire-rated system

has been fully fire tested at Underwriters Laboratories of Canada

(ULC), UL in the U.S.A., and Warrington Fire Research Centrein the United Kingdom. The fire-rated main tee incorporates the

Bailey Patented Expansion Joint. Under fire conditions, this in-line

expansion joint expands linearly reducing the rotation effect on

the grid itself.

Baileys ULC fire-rating listings cover all building applications through

their 1 and 2 hour floor/ceiling and 1 hour roof/ceiling designs.

All fire-rated cross tees are of 1 1/2 high structural design with

fire-rated end joinery designed to expand through the main tee

slot under fire conditions.

In addition to meeting fire rating requirements, Bailey Lance-Lock

System 1800 delivers all installation, economy and durability

featured in the non-rated System 900.

U.L.C. Classified for fire resistance designs

Straight push-in joinery with stepped edge

for a crisp, clean main tee/cross tee intersection

ASTM C635 Intermediate Duty Rating

Rapid assembly for economical installation

Engineered for maximum design flexibility

with economy and durability

ADVANTAGES

15/16

1 1/2

1 1/2

15/16

15/16


4/12


BAILEY LANCE-LOCK SYSTEM 900 15/16 EXPOSED TEE SYSTEM NON-RATED

Bailey Lance-Lock System 900 exposed tee non-rated system

is a fully engineered, double web design. The main runners are

1 1/2 (38mm) high, available from stock in 10 (3000mm) and

12 (3600mm) lengths. Custom lengths up to 12 can easily be

manufactured and all main runners are available with either

conventional or basketweave end joinery.

The 1 standard and 1 1/2 structural cross tees have a straight

push-in locking design facilitating ease of installation and

removal. All cross tees are designed with a toboggan or

stepped end ensuring a crisp, clean appearance.

Engineered and tested to ASTM C635

Intermediate and Heavy Duty Standards

Designed for installation in either conventional

or basketweave layouts

Straight push-in joinery with stepped edge

for a crisp, clean main tee/cross tee intersection

Sturdy double web design

Rapid assembly or disassembly for ease

of installation or removal for relocation

Engineered for maximum design

flexibility with economy and durability

ADVANTAGES

15/16

15/16

1 1/2

15/16

1


5/12

S H A D O W L I N E S Y S T E M S

SHADOWLINE SYSTEM 800 9/16 EXPOSED TEE SYSTEM NON-RATED

Shadowline System 800 9/16 narrow face exposed grid

system enhances the look of the ceiling by decreasing the

visibility of the suspension systems.

The Bailey Shadowline Suspended Ceiling System is a Class A

non-rated system. This system combines the engineered strength

of the Bailey Lance-Lock system, with the sleek look provided by

narrower exposed face.

In addition, Shadowline System 800 incorporates the Bailey

panel centering device, ensuring panels are always centered.

this feature adds rigidity to both main and cross tees.

Main tees are available in 10 and 12 lengths to meet any

layout demands. Custom lengths up to 144 are available by

special order.

All products use a 1 1/2 body for added strength

Double web design body

Straight push-in joinery with stepped edge for a

crisp, clean main tea/cross tee intersection

Engineered with the Bailey panel centering device

for rigidity and precise panel location

Rapid economical installation

Hanger holes in grid bulb and body for complete

installation flexibility

Finished in Tile White, an ideal match for today's

ceiling panels.

ADVANTAGES

9/16

9/16

1 1/2

9/16

1 1/2


6/12


BAILEY LANCE-LOCK SYSTEM 400 15/16 ALL ALUMINUM EXPOSED TEE SYSTEM

Bailey Lance-Lock System 400 15/16 Exposed Grid system is

manufactured from 100% aluminum, providing maximum

protection in higher humidity environments.

Available in white or natural aluminum finish, Bailey Lance-Lock

System 400 offers the versatility of conventional design. This allaluminum system meets the requirements of areas such as kitchens,

food processing operations, etc.

Main tees are available in 10 and 12 lengths to meet any layout

demands.

Cross tees are available in standard lengths of 1, 2, 4, and 5.

All products use a 1 1/2 body for added strength


Straight push-in joinery with stepped edge for

a crisp, clean main tee/cross tee intersection

White or natural aluminum finish design

Rapid economical installation

Hanger holes in grid bulb and body for complete

installation flexibility

Designed to provide maximum corrosion resistance

ADVANTAGES

15/16

15/16

1 1/2

15/16

1 1/2


7/12

L A N C E - L O C K E N V I R O N M E N T A L S Y S T E M S

BAILEY LANCE-LOCK SYSTEM 700 15/16 CLASS A SYSTEM

BAILEY LANCE-LOCK SYSTEM 1400 15/16 FIRE-RATED SYSTEM

BAILEY LANCE-LOCK SYSTEM 600 9/16 CLASS A SYSTEM

Lance-Lock 700 is designed for installationin hostile environments, where the ceiling

will be subjected to high humidity.

Lance-Lock 700 is manufactured fromhot dipped galvanized steel to provide

maximum protection in areas such as food

process plants, kitchens and health care

centers where regular washing of the

ceiling may be required.

At the same time, Lance-Lock 700incorporates the features and benefits

of the Lance-Lock 900 system, including

superior strength, ease of installation

and design flexibility.

Lance-Lock 1400 system not only suitsthe design needs of hostile environments,

but is also classified for ULC Fire Resistance

Designs.

As with Lance-Lock 700, hot dipped

galvanized steel provides the environmental

protection you need, while meeting your

ULC fire rating requirements at the same

time.

Lance-Lock 600 offers the same designfeatures and benefits as the 700 system,in a 9/16 profile.

Manufactured from hot dipped galvanized

steel, Lance-Lock 600 provides environ-mental protection with the aesthetics of

narrow grid in one system.

Hot dipped galvanized steel

For Installation in high

humidity environments


Heavy and intermediate Duty

ASTAM C635 classifications

Available in all standard

colours

ADVANTAGES

Provides a ULC Fire Rated

Environmental System

Heavy and Intermediate

ASTM C635 classification

Double web, hot dipped

galvanized components

Lance-Lock straight lock-in

end joinery

ADVANTAGES

1 1/2 double web design

Narrow grid design

Hot dipped galvanized steel

Designed for protection in

hostile environments

ADVANTAGES

15/16

1 1/2

15/16

1

15/16

1 1/2

15/16

1 1/2

9/16

1 1/2

9/16

1 1/2


8/12

Dimension

Variable

Angle Mould BMF F Mould BMX32 Flex Wall MouldBMX32 Flex Wall Mould

1/2 or 5/8 Board

AFS-10

Panel/Tile Width/Length

12 x 12 = 300mm x 300mm

12 x 24 = 300mm x 600mm

24 x 24 = 600mm x 600mm

24 x 48 = 600mm x 1200mm

24 x 60 = 600mm x 1500mm

20 x 60 = 500mm x 1500mm

30 x 60 = 750mm x 1500mm

Grid Width/Length

9/16 = 14mm

15/16 = 24mm

1 = 300mm

2 = 600mm

4 = 1200mm

5 = 1500mm

8 = 2400mm

10 = 3000mm

12 = 3600mm

1/2 = 13mm

5/8 = 16mm

3/4 = 19mm

1 = 25mm

.012 = .31mm

.015 = .38mm

.018 = .46mm

.020 = .51mm

.033 = .84mm

10.76 sq.ft. = 1 sq. metre

2.205 lbs = 1kg

3.94 = 100mm

Panel/Tile Thickness Imperial/Metric Conversion

L A N C E - L O C K S U S P E N D E D C E I L I N G A C C E S S O R I E S

BAILEY WALL ANGLES

BAILEY COLUMN RINGS

CORNER CAPS

BAILEY ARCHITECTURAL FLAT STRAP

MISCELLANEOUS

Bailey flat strap is available in various

widths and finishes to match your ceilingor custom colour requirements.

Architectural flat straps are ideal for curved

and illuminated kitchen type ceilings.-10 lengths.

BA 21 Hold Down ClipFor use with 1 1/2 ceiling grid over

5/8, 1/2, 3/4 panels to resist

upward wind loading on tiles.

BA 53 installation ClampA multipurpose clamp, often used to hold

your line to the wall angle when laying

out and levelling your ceiling.

Paired Tee ClipProvides a simple method of introducing

a double main tee into your ceiling system.

The space between the double main tees

allows for air return or air handling

through linear diffusers.

Available for both square

or round (bullnose) corners.

Available in steel or aluminum with baked enamel

paint finish to match the grid. Custom made to specific

dimensions. Post painted to match any design.

Bailey provides a wide variety

of mouldings produced in

steel, offering various colours

and finishes to meet most

design needs.

METRIC MODULE CONVERSION CHART (All dimensions indicate nominal size)

Product NumberOpening

DimensionCenter to Center

Dimension

B134 1 3/4 3/4

B200 2 1

B214 2 1/4 1 1/4

B212 2 1/2 1 1/2

B300 3 2

3/4

3/4

1/2

Conventional Reveal

BA 35 BA 36 BA 37 Bullnose

3/4 1 3/4

PAIRED TEE

CLIP

Main RunnerOpening


9/12

3 6 6 3

75mm

BSC-3 Clip

Main Runners

Locating Lance

1 1/2 Cross Tee

L A N C E - L O C K S Y S T E M D E T A I L S

The Bailey Relocatable Clip is designed to allow a cross tee

to main tee connection within non-compatible systems and non-

modular layouts.

Existing ceilings may be changed or added to using Bailey grid,

irrespective of the original ceiling system. In ceilings requiring

the installation of custom size fixtures, diffusers, speakers, etc.,

additional cross tees can easily be locked in place, even after

ceiling completion.

Standard BSC-3 Clip Installation

NOTE: Stocked cross tees less than 48 (1200mm) long are produced without holes. Custom punching to suit any layout is easily accommodated.

Lance-Lock System 900 = Be Non-Rated Assemblies Lance-Lock System 1800 = Bef Fire-Rated Assemblies

Location and Locking Lances Removed

BSC-3

BAILEY LANCE-LOCK IMPERIAL/METRIC PUNCHING DETAILS

BAILEY RELOCATABLE CLIP/REMOVABLE CROSS TEE SYSTEM

MAIN RUNNERS Web Height 1 1/2 (38mm)

CROSS TEES Web Height 1 (25mm)

75mm 150mm 150mm

Be/Bef 144 24 Slots @ 6 o.c. Be/Bef 3600 24 Slots @ 150mm o.c

5 10 10 5

125mm 250mm 250mm 125mmBe 120 12 Slots @ 10 o.c. Be 3000 12 Slots @ 250mm o.c

12 12 12 12

300mm 300mm 300mm 300mm

Be 48 3 Slots as shown Be 1200 3 Slots as shown

12 12

300mm 300mm

Be 24 1 Slot @ mid-point Be 600 1 Slot @ mid-point

CROSS TEES Web Height 1 1/2 (38mm)

20 20 20 20

500mm 500mm 500mm

20 20

500mm 500mm 500mm

Bef 120 5 Slots @ 20 o.c. Bef 3000 5 Slots @ 500mm o.c.

6 14 10 6

150mm 350mm 250mm

10 14

250mm 350mm 150mm

Bef 60 5 Slots as shown Bef 1500 5 Slots as shown

12 12 12 12

300mm 300mm 300mm 300mm

Bef 48 3 Slots as shown Bef 1200 3 Slots as shown

12 12

300mm 300mm

Bef 24 1 Slot @ mid-point Bef 600 1 Slot @ mid-point


10/12

C O L O U R A N D F I N I S H E S

THE BAILEY COLOUR GUIDE

THE BAILEY COLOUR GUIDE

The Baileys Lance-Lock System introduces a collection of colours

designed to compliment current interiors and those of the future.

From standard white to metallic finishes, Bailey offers a full

colour spectrum.

Baileys Lance-Lock series are available in these standard colours.

Ask your dealer or sales representative for information on any

custom colours you may require.

*For special colours, please consult your sales representativeNOTE: The colours shown have been reproduced with all the fidelity possible with commercial printing processes. A specific colour may appear different from one class of

product to another. For assurance, ask for an actual sample to see the true colour of the product you select.

STANDARD

METALLICS

White Black Platinum Parchment Haze Manilla Sandstone Taupe

Chrome Brass Aluminum


11/12

CONVENTIONAL LAYOUT. BASKETWEAVE LAYOUT

(System utilizing 120 cross tees as main memberS)

5 x 5 or 1500mm x 1500mm Module

20 X 60 or 500mm x 1500mm Sub-Module


20 X 60 or 500mm x 1500mm Sub-Module


2 x 2 or 600mm x 600mm Sub-Module


2 x 4 or 600mm x 1200mm Sub-Module

600 60075

NOTE: For fixture loads with specified material thickness, hanger spacing and selected cross tee height, please contact Bailey Metal Products Limited for allowable loads

for your specific application.

NOTES:

MT = 1 1/2 Main Tee 12 Foot (3600mm)

CT = 1 or 1 1/2 Cross Tee 48 Inch (1200mm)

NOTES

MT = 1 1/2 Main Tee 12 Foot (3600mm)

CT1 = 1 or 1 1/2 Cross Tee 48 Inch (1200mm)

CT2 = 1 or 1 1/2 Cross Tee 24 Inch (600mm)

24 243

1200

Fixture Location

Where Crossed

Splice Location

Typical

Hanger Location

Typical

Fixtures @ 8 - 0 O.C.

Fixtures @ 6 - 0 O.C.

4-

0

600

600

Hanger Location

Typical

600 60075Splice Location

Typical

24

24

24 243

Fixture Location

Where Crossed

15 20205375 500500125

Splice Location

Typical

1500

5-

0

Fixture Location

Where Crossed

NOTES:

MT = 1 1/2 Main Tee 10 Foot (3 metre)

CT = 1 1/2 Cross Tee 60 Inch (1500mm)

NOTES:

CT 1 = 1 1/2 Cross Tee 120 Inch (3000mm)

CT 2 = 1 1/2 Cross Tee 60 Inch (1500mm)

5-

0

1500

= 1500

3 @ 500

= 5 - 0

3 @ 20Fixture Location

Where Crossed

Hanger

Location

Typical

Any Fixture

May Be

Absent or

Rotated 90

Without

Requiring

Additional

Hangers

Any Fixture

May Be Absent

B A I L E Y S Y S T E M L A YO U T S

CONVENTIONAL LAYOUT. CONVENTIONAL LAYOUT.

Splice Location

Typical

Any Fixture

May Be Absent

Any Fixture

May Be Absent

Any Fixture

May Be Absent


12/12

MONTREALLES PRODUITS METALLIQUES BAILEY LTEE

525 Avenue Edward VIIDorval QC H9P 1E7Tel: (514) 735 3455

(800) 263 3455

F (514) 735 5052

TORONTO

One Caldari RoadConcord ON L4K 3Z9Tel: (905) 738 9267

(800) 668 2154Fax: (905) 738 5712

BAILEY METAL PRODUCTS LIMITED

CALGARY

3924 27th Street NECalgary AB T1Y 5K7Tel: (403) 248 3536

(800) 665 2013Fax: (403) 248 0288

EDMONTON

5710 Roper Road N.W., Suite 101Edmonton AB T6B 3G7

Tel: (780) 462 5757(800) 563 1751

Fax: (780) 465 3791

CODES AND S TANDARDS (A r ch i t e c t u ra l Spec i f i ca t i on s )

Characteristics, properties or performance of materials or

systems manufactured by Bailey Metal Products Limited

herein described are derived from data obtained under

controlled test conditions. Bailey makes no warranties,

express or implied, as to their characteristics, properties or

performance under any variations from such conditions in

actual construction. Bailey Metal Products Limited assumes

no responsibility for the effects of structural movement.

NOTICE: The Information in this document is subject tochange without notice. Bailey assumes no responsibility

for any errors that may appear in this document.

See Bailey Acoustical Ceiling Systems literature

for product details, recommended uses and

application instructions.

VANCOUVER

7715 Anvil WaySurrey BC V3W 6A2Tel: (604) 590 5100

(800) 818 2666Fax: (604) 599 5371 4

874-0709-2500

CODES AND STANDARDS

The Bailey exposed grid suspended

ceiling systems are manufactured

to the following standards:

ASTM C635

Grade of Steel:

ASTM A 366/A 366M or better

Steel Coating: ASTM C635 or better

LANCE-LOCK FIRE RESISTANCE RATINGS

Canada

Lance-Lock is fire-rated for the requirementsof both 1 and 2 hour roof/ceiling and

floor/ceiling designs. All testing was carried

out at Underwriters Laboratories of Canada

(ULC) in accordance with CAN 4 S101M

Guide Item 40U 18.18.

ULC Time Rated Designs

C 204, D 203, D 205, G 208, G 218, I 210,

I 211, I 214, I 215, L 201, R 222, R 224.

United States

Bailey is UL Classified for the requirements

of both 1 and 2 hour roof/ceiling and

floor/ceiling fire rated designs. All testing

was conducted in accordance with

ANSI/UL 263 (ASTM E 119 AND NFPA 251).

Please contact our office for specific

design numbers.

United Kingdom

All fire testing was completed at theWarrington Fire Research Center. The

Bailey Lance-Lock System is fire-rated for

1 hour as required under British Standard

476 Part 23 1987.

Metric Installations:

All components are manufactured in

both Metric and Imperial as referenced.

ARCHITECTURAL SPECIFICATIONS

1. General:

The 15/16, 9/16 exposed grid

suspension systems are manufactured

by Bailey Metal Products Limited.

2. Materials:

2.1 Lance-Lock System.

The 15/16 (Fire-Rated), double-web

design, Lance-Lock Exposed Grid System,

shall conform to the requirements of the

Intermediate Duty and Heavy Duty

classification of ASTM C635.

2.2 Shadowline System.

9/16 Shadowline Exposed Grid System

of double-web design, incorporates the

Bailey tile-centering device.

2.3 All materials are cold rolled steel

with protective coating to ASTM C635,

or better. Pre-painted baked-on capping

Global White Tile.

3. Installation:

3.1 The Bailey Exposed Grid Suspension

System shall be installed in accordance

with the requirements of ASTM C636.

Deflection of any component shall not

exceed 1/360 of the span.

3.2 Main Runners to be installed 24, 36

48, or 60 on centre or as specified on

drawings, and directly suspended by wire

not less than 12 gauge in thickness.

Suspension wire to be spaced at 48 or

60 on centre as required.

3.3 Cross Tees to be interconnected tomain runners at 20, 24, 36, 48, or 60

on centre, or as required.

3.4 Wall mouldings (BM5 Angle), (BMR10

Reveal Mould) to be installed wherever

ceiling meets vertical surfaces.

3.5 Install supplemental hangers where

the weight of light fixtures or other ceiling

apparatus, cause the deflection of the

ceiling grid to exceed 1/360, as specified

in ASTM C636.

NOTE: All hanger wire to be tightly

wrapped with a minimum of three

full turns.

Suspended Ceiling System

Documents

Transcript of Suspended Ceiling System