Surge Protector - Installation Instruction Type-PS Orange Series (
of 2
Transcript of Surge Protector - Installation Instruction Type-PS Orange Series (
-
7/27/2019 Surge Protector - Installation Instruction Type-PS Orange Series (http://shop.acdc-dcac.eu/)
1/2
Sur e ProtectionG
Installation and Operating Instruction
ACDC Surge Protectors Type - PS (11; 137; 146)-M Orange SeriesEIGHT (8) STAGES 1/1SERIES PROTECTOR
Cascade bi-directional EMI-RFI filtering of phase (L) and neutral (N) wire
CLASSCLASSI+II+IIII+II+III 200 homeome telecomelecom industryndustrycenterenterITT
IPIP3300 11 22
LPZLPZ
Single Phase CLASS I+II+III
Plug n nstallation - SCHUKO PLUGi I
Type - PS (11; 137; 146)-M Orange Series
Indication for bed grounding
www.acdc-dcac.euACDC DCAC Dane Kr apcev no .2/1 , 1000-Sko pj e, Mac edo ni a Phon e: 389 2 3216 988; Fax: 389 2 3216 993
Metal Enclos ures
Schuko plugF-type
Surur eMULTI-STAGE SURGE PROTECTION
-
7/27/2019 Surge Protector - Installation Instruction Type-PS Orange Series (http://shop.acdc-dcac.eu/)
2/2
Installation of ACDC Surge Protectors
The ACDC Surge Protectors - Orange Series which completely eliminates
frequency nois e and power pollution generated in power network supply. The protection device have high grade cascade bi-directi onalEMI/RFI filtering of phase (L) and neutral (N) wire and special diagnostic for condition of ground.
To reduce the risk of fire, connec t only to a circuit provided with 63A (amperes ) maximum branch circuit over current
protection. Do not connect equipment that may overload the surge protector (grater than 25A)
Type (11; 137; 146)-M present eight (8) stages surge protector
The protectors
The surge Protector of type ACDC Surge Protector - Orange Series is compact stand alone unit and it is install quickly and
easily on princip PLUG and PLAY. The option for connectors is wide and refer to Shouko plug, terminal block or other option
according customer requirements.
of for
up to
are tracking AC waveform eliminating so-called pollution in power AC supply.
The units could be use for protect ion of one elect ronic device or group elect ronic devices thought power strip load
25A per phase.
Setup Instruction:
lug the protector an earthen/grounded outlet (that meets national and local electrical safety guidelines).
Plug the input cord form ACDC Surge Protector to the wall outlet.
Plug the output cord to electric device or th ough power strip to group of electric devices.
1. For p i ng choose
2.
a r
Do not attempt to service any parts inside the protector. Failure to adhere to this could cause pers onal injur y or equipment
malfunction.
During the installation please check:
Condition for Installations:
1. The voltage of the ACDC Surge Protector matches actual system voltage.
2. All conductors are in accordance with the appropriate installation drawings.
CORRECT INSTALLATION - THE LIGHTS GREEN AND YELLOW ARE LIT
ROTATE THE PLUG CONNEC TOR. IF THE RED LED IS STILL
BLINKING OF THE WALL OUTLET
TROUBLESHOOTING - IF THE RED LED IS BLINKING
THE GROUND WIRE IS NOT CONNEC TED OR THE GROUND OF THE POWER GRID SYSTEM IN NOT WELL
PERFORMED
:
- rovides adequate safety protection
- Prevents the ingress of moisture and water
p
Installation Instruction
DANGER
CAUTION
CAUTION
!
!
OPTION!
!
DANGER!
!
!
GREENREEN REDEDREDED
YELLOWELLOWYELLOWELLOW
[email protected] Integrated Multi-Stage Protection
Surur e MULTI-STAGE SURGE PROTECTION
