Surflink Mobile for hearing aids Manual and data transmission over short distances between ......
Transcript of Surflink Mobile for hearing aids Manual and data transmission over short distances between ......
![Page 1: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/1.jpg)
O P E R AT I O N S M A N U A L
![Page 2: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/2.jpg)
2 3
Table of Contents
Introduction 4Terminology 5SurfLink Mobile Overview 6 Touch Screen Display 7 On/Off Button 8 Volume Up 8 Volume Down 9 Micro USB Port 9 SurfLink Mobile Microphone Ports 10 Accessories 10Getting Started / Setup 12 Syncing Hearing Devices with SurfLink Mobile 12 Pairing Mobile Phone with SurfLink Mobile 14Operation 18 Adjusting Your Hearing Devices 18 Streaming Phone Calls 20 Streaming Audio 24Settings 28 Bluetooth 28 Hearing Devices 28 Tools 29Required Information 44 FCC Information 46
For more information about SurfLink Mobile, please contact NewSound Hearing Aid Centers
1-877-55-SOUNDwww.newsoundhearing.com
![Page 3: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/3.jpg)
4 5
Introduction
The SurfLink Mobile device is designed to interface with your wireless hearing devices in multiple ways:• As a cell phone streaming device• As an audio streaming device from:
– Bluetooth devices– Wired input connected via the micro USB port– SurfLink Mobile directional or omnidirectional
microphones• As a remote control to make hearing device settings
adjustments
Terminology
Streaming/Audio Streaming – Sound is sent wirelessly from an audio device to the hearing devices via SurfLink Mobile.
Sync – To establish a connection between SurfLink Mobile and wireless hearing devices so that the hearing devices can receive streamed audio and settings changes from SurfLink Mobile.
Pair – To establish a connection between a Bluetooth device (e.g., mobile phone, MP3 player, laptop) and SurfLink Mobile for the purpose of streaming audio from the Bluetooth device to the hearing devices via SurfLink Mobile.
Assistive Listening Device – A device used to overcome listening challenges resulting from distance from a sound source, background noise or reverberation by sending the sound source directly to the listener.
Directional – A microphone designed to receive sound from a particular direction (in front of the microphone) and to reduce the level of sounds from other directions. Directional microphones are useful for listening to a single speaker in the presence of background noise.
Omnidirectional – A microphone which receives sounds from all directions. Omnidirectional microphones are useful for listening to multiple speakers in quiet environments.
Bluetooth – Wireless communication technology used for audio and data transmission over short distances between two paired devices.
![Page 4: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/4.jpg)
6 7
SurfLink Mobile
Overview
Surf
Link
Mob
ile
Ove
rvie
w
Touch Screen Display
The SurfLink Mobile device incorporates a full-color display with an innovative touch screen to control all features of the device. Press and release the Touch Screen display buttons to make selections via the Touch Screen.
The taskbar at the top of the display provides information about the SurfLink Mobile device battery status as well as indication of the Bluetooth antenna On state.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
When the SurfLink Mobile Bluetooth antenna is On,
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
will display on the left end of the taskbar. When the Bluetooth antenna is Off, no symbol will display.
Status of the SurfLink Mobile rechargeable battery will be provided as follows:
• Fully charged100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• 80% charged100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• 60% charged
100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• 40% charged
100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• 20% charged
100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• <20% charged
100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
• Charging
100%
80%
60%
40%
20%
Fully Charged
Charging @80%
Charging @60%
Charging @40%
Charging @20%
<20%
Battery Status
SurfLink Mobile Overview
1. On/Off Button
2. Volume Up/Down Buttons
3. Touch Screen
4. Micro USB Port
5. Built-In Microphone Ports
1
5
2
3
4
![Page 5: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/5.jpg)
8 9
SurfLink Mobile
Overview
Surf
Link
Mob
ile
Ove
rvie
w Volume Down
To decrease the volume of sounds coming through the wireless hearing device, press and release the Volume Down button on the side of the device. Continue to press and release until the desired volume is reached.
Micro USB Port
The Micro USB port is used for recharging the SurfLink Mobile rechargeable battery as well as for streaming audio from a wired input.
To recharge the SurfLink Mobile battery, connect the battery charging cable to the Micro USB port on the SurfLink Mobile device (Figure 1) and attach the USB connector of the charging cable to the wall charging adaptor (Figure 2). Plug the wall charging adaptor into a power outlet.
Note: Charging time from fully depleted to full charge is approximately three hours. It is important that the SurfLink Mobile battery be fully charged and fully depleted at least three times during initial use to calibrate the battery indicator shown on the device screen. Until this occurs, the battery indicator will not accurately reflect remaining battery life.
On/Off Button
To turn the SurfLink Mobile device On, press and hold the On/Off button until the touch screen display powers on.
When the SurfLink Mobile device is On, you can put the device into Sleep Mode by a short press and release of the On/Off button. In Sleep Mode, the device is still On, but the Touch Screen display is turned off. Sleep Mode can be used to prevent accidental input to the Touch Screen display as well as a way to preserve SurfLink Mobile battery life during use. SurfLink Mobile will automatically enter Sleep Mode to conserve power when no Touch Screen input is received for one minute. To wake the screen, press and release the On/Off button, then press the push to unlock button on the screen.
To turn the SurfLink Mobile device Off, press and hold the On/Off button until the Touch Screen displays the “Powering Down” message and the device turns off.
Volume Up
To increase the volume of sounds coming through the wireless hearing device, press and release the Volume Up button on the side of the device. Continue to press and release until the desired volume is reached.
SURF LINK
Fig. 1
Fig. 2
![Page 6: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/6.jpg)
10 11
SurfLink Mobile
Overview
Surf
Link
Mob
ile
Ove
rvie
w To interchange attachments, remove the base clip from SurfLink Mobile, then press down on the release tab (Figure 4) of the base clip to unlock and slide the attachment out of position toward the center of the base clip (Figure 5), where it can be removed (Figure 6). Insert the desired attachment into the center position of the base clip (Figure 7) and slide into position at one end of the base clip to lock the attachment into place (Figure 8).
The Audio Line-In Adaptor allows SurfLink Mobile to be connected to any audio device with a 3.5 mm audio jack. Simply connect the micro USB end of the adaptor to SurfLink Mobile (Figure 9) and connect the 3.5 mm jack to the headphone jack of the audio device. See page 24 for instructions on streaming audio to the hearing devices via SurfLink Mobile.
SurfLink Mobile Microphone Ports
SurfLink Mobile incorporates both a Directional microphone and Omnidirectional microphone for use in streaming audio as an assistive listening device. The Directional microphone is intended to focus primarily on a single speaker, whereas the Omnidirectional microphone can be used to pick up multiple speakers in a quiet environment. Selection of the microphones for streaming is done from the Streaming screen – see page 25 for more information.
Accessories
SurfLink Mobile comes with clip and lanyard accessories, which allow the device to be worn for hands-free use. The accessories include a base clip and interchangeable lanyard and clip attachments.
Slide the desired attachment option (lanyard or clip) onto the base clip, then attach the base clip to SurfLink Mobile by orienting the clip according to the shadowed outline of the base clip on the back of the device (Figure 3).
Base Clip Front/Back Belt Clip Attachment
Fig. 3
Fig. 4
Fig. 6
Fig. 5
Fig. 7
SURF LINK
Fig. 9Fig. 8
Lanyard Attachment
![Page 7: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/7.jpg)
12 13
Getting Started /
SetupG
etti
ng S
tart
ed /
Setu
p
3. Press the Sync New button to put the SurfLink Mobile device into syncing mode.
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
No devices
are synced
at this time
Sync New
Hearing Dev.
No devices
are synced
at this time
Sync New
Cancel
Open and close the battery
door of the hearing device(s)
you wish to Sync. Devices
will be automatically
detected and displayed.
Syncing
Select devices to sync
Play Tone Sync
Syncing Hearing Dev.
Synced Hearing Devices
0123456789
9876543210
Sync New
Hearing device
syncing is complete
Okay
Syncing
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Un-sync
0123456789
from device?
Un-Sync
Yes Cancel
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Settings > Hearing Devices Screens
Settings
Tools
Hearing Devices
Bluetooth
4. Follow the on-screen instructions to open and close the battery door of the hearing devices you wish to sync with SurfLink Mobile.
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
No devices
are synced
at this time
Sync New
Hearing Dev.
No devices
are synced
at this time
Sync New
Cancel
Open and close the battery
door of the hearing device(s)
you wish to Sync. Devices
will be automatically
detected and displayed.
Syncing
Select devices to sync
Play Tone Sync
Syncing Hearing Dev.
Synced Hearing Devices
0123456789
9876543210
Sync New
Hearing device
syncing is complete
Okay
Syncing
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Un-sync
0123456789
from device?
Un-Sync
Yes Cancel
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Settings > Hearing Devices Screens
Settings
Tools
Hearing Devices
Bluetooth
Getting Started / Setup
Syncing Hearing Devices with SurfLink Mobile
To use SurfLink Mobile with your wireless hearing devices, you must fi rst sync the hearing devices withSurfLink Mobile:
1. Navigate to the Settings screen using the navigation arrows at the bottom of the touch screen display.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
2. On the Settings screen, select Hearing Devices.
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
No devices
are synced
at this time
Sync New
Hearing Dev.
No devices
are synced
at this time
Sync New
Cancel
Open and close the battery
door of the hearing device(s)
you wish to Sync. Devices
will be automatically
detected and displayed.
Syncing
Select devices to sync
Play Tone Sync
Syncing Hearing Dev.
Synced Hearing Devices
0123456789
9876543210
Sync New
Hearing device
syncing is complete
Okay
Syncing
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Un-sync
0123456789
from device?
Un-Sync
Yes Cancel
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Settings > Hearing Devices Screens
Settings
Tools
Hearing Devices
Bluetooth
![Page 8: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/8.jpg)
14 15
Getting Started /
SetupG
etti
ng S
tart
ed /
Setu
p
1. Navigate to the Settings screen using the navigation arrows at the bottom of the touch screen display.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
Input
Play
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Room O�
Play
Stop
Streaming Screen
Labels On
Streaming
Input
Play
Streaming Streaming
Input Input
Play Play
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
2. On the Settings screen, select Bluetooth.
Settings
Tools
Hearing Devices
Bluetooth
Settings
Tools
Hearing Devices
Settings
Bluetooth
Normal
Scrolling List screens
Pressed
Scrolling List
Label
Label
Label
Pressed
Scrolling List
Settings Screens
3. Ensure that the Bluetooth mobile phone is turned On with Bluetooth enabled and is within 10 meters/30 feet of the SurfLink Mobile device.
5. The hearing devices will be detected by SurfLink Mobile and the serial numbers will be shown on the display. If you wish, you can present a tone in the hearing devices to confi rm that the correct devices were detected by selecting the Play Tone button. Otherwise, press the Sync button to complete the syncing process.
Select devices to sync
0123456789
9876543210
Play Tone Sync
Syncing
Note: When syncing is successful, you will see a success message on the SurfLink Mobile display and you will hear a sustained success tone presented through the hearing instrument.
6. Your wireless hearing devices and SurfLink Mobile device will now work together as a wireless system.
Pairing Mobile Phone with SurfLink Mobile
To stream calls from a mobile phone using SurfLink Mobile, you must fi rst pair the mobile phone with SurfLink Mobile:
![Page 9: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/9.jpg)
16 17
Getting Started /
SetupG
etti
ng S
tart
ed /
Setu
p
7. Select a graphic icon to represent the mobile phone device by pressing the Choose Device Label button. The recommended graphic icon is the Cell Phone graphic. Use the up/down arrows as needed to page through the list of available graphic icons.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
8. Once the graphic icon has been selected, the Bluetooth Devices screen will appear and will show the newly paired mobile phone in the list of available paired Bluetooth devices.
4. Press the Pairing Mode button in the center of the screen. This button will remain active for the duration of the Bluetooth pairing process.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
5. Confi rm the Bluetooth pairing from the mobile phone. If you are unsure of how to get your mobile phone to recognize Bluetooth devices, consult the manufacturer of your phone.
6. Once the pairing process is complete, the Bluetooth Pairing Confi rmation screen will display on the SurfLink Mobile device.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
![Page 10: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/10.jpg)
18 19
OperationO
pera
tion
Volume Up / Down – make adjustments to overall volume of all sounds coming through the hearing devices.
Memory Change – cycle through the various memories that are programmed into the hearing devices.
Mute / Unmute – temporarily turn off all sound coming through the hearing devices by pressing this button. Unmute the hearing device by pressing the Mute button again.
Note: When the hearing devices are muted, pressing any button on the Remote screen will also unmute the hearing devices and perform the function of the button selected.
Favorite – select to activate the Favorite setting that is programmed into the hearing devices. Ask your hearing professional if your hearing device has a Favorite.
Home – reset the hearing devices to Memory 1 at the power-on volume level.
Operation
Adjusting Your Hearing Devices
To make hearing device adjustments via SurfLink Mobile, use the Remote screen:
1. The Remote screen is the default screen when you power on SurfLink Mobile. This screen is also accessible from the Streaming and Phone Call screens, allowing you to adjust your hearing devices while streaming audio.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
2. From the Remote screen, you can make the following hearing device adjustments:
Left / Binaural / Right Control – use these buttons to specify whether remote control adjustments will be made to a single hearing device or both hearing devices at the same time.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
![Page 11: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/11.jpg)
20 21
OperationO
pera
tion
Note: The call can also be declined via themobile phone itself.
A phone call is in progress:
1. When an outgoing call is made from the paired mobile phone or an incoming call is accepted, the Phone Call screen will display on the SurfLink Mobile Touch Screen display.
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
5557654321
Incoming Call Waitng
Incoming Call
5557654321
RemotePhone RemotePhone Phone Remote
Just Talk
SurfLink Mic
Just Talk
SurfLink Mic
Labels On
Phone Call Screens
Phone Call Screen
RemotePhone
Just Talk
Mute
RemotePhone
Just Talk
UnmuteMute
Phone Call Screen
RemotePhone
Just Talk
Mute
Swap Call
Phone Call Screen
RemotePhone
Just Talk
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming Call
5557654321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
2. JustTalk, which uses the Hearing Device Microphone
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
5557654321
Incoming Call Waitng
Incoming Call
5557654321
RemotePhone RemotePhone Phone Remote
Just Talk
SurfLink Mic
Just Talk
SurfLink Mic
Labels On
Phone Call Screens
Phone Call Screen
RemotePhone
Just Talk
Mute
RemotePhone
Just Talk
UnmuteMute
Phone Call Screen
RemotePhone
Just Talk
Mute
Swap Call
Phone Call Screen
RemotePhone
Just Talk
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming Call
5557654321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
, or the SurfLink Mobile Microphone
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
5557654321
Incoming Call Waitng
Incoming Call
5557654321
RemotePhone RemotePhone Phone Remote
Just Talk, which uses the Hearing Device Microphone SurfLink Mic
Just Talk
SurfLink Mic
Labels On
Phone Call Screens
Phone Call Screen
RemotePhone
Just Talk
Mute
RemotePhone
Just Talk
UnmuteMute
Phone Call Screen
RemotePhone
Just Talk
Mute
Swap Call
Phone Call Screen
RemotePhone
Just Talk
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming Call
5557654321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
can be used to pick up your voice for transmission to the person on the other end of the phone call. Toggle the Voice Pickup button to select the desired option.
Note: When using the SurfLink Mobile microphone, the SurfLink Mobile device should be worn within 12 inches of your mouth for optimal voice pickup. The lanyard accessory is designed to assist in this situation.
3. Use the side volume buttons to adjust the level of the mobile phone streamed audio signal.
Streaming Phone Calls
An incoming call is received by the pairedmobile phone:
1. When SurfLink Mobile is On and an incoming call is received by the paired mobile phone, the Incoming Call screen will appear on the SurfLink Mobile touch screen display.
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
Bob Caller555-765-4321
RemotePhone RemotePhone Phone Remote
Labels On
RemotePhone
Room O�
Room O�
Phone Call Screens
2. Answer the call via the SurfLink Mobile device by pressing the Answer button.
Note: The call can also be answered via the paired mobile phone. With some mobile phones, in order to use SurfLink Mobile to stream the call by default, you need to answer the call via SurfLink Mobile; answering on the phone will use the phone speaker and microphone by default.
3. To Decline the call, either press the Do Not Answer button OR press any of the switches on the case of the SurfLink Mobile device.
![Page 12: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/12.jpg)
22 23
OperationO
pera
tion
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
Bob Caller555-765-4321
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
RemotePhone RemotePhone Phone Remote
Labels On
Room O�
Phone Call Screens
Phone Call Screen
RemotePhone
Mute
RemotePhone
UnmuteMute
Phone Call Screen
RemotePhone
Mute
Swap Call
Phone Call Screen
RemotePhone
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
2. Press Do Not Answer
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
Bob Caller555-765-4321
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
RemotePhone RemotePhone Phone Remote
Labels On
Room O�
Phone Call Screens
Phone Call Screen
RemotePhone
Mute
RemotePhone
UnmuteMute
Phone Call Screen
RemotePhone
Mute
Swap Call
Phone Call Screen
RemotePhone
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
to ignore the second call and continue with the active call uninterrupted.
Press Hold Call + Answer
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
Bob Caller555-765-4321
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
RemotePhone RemotePhone Phone Remote
Labels On
Room O�
Phone Call Screens
Phone Call Screen
RemotePhone
Mute
RemotePhone
UnmuteMute
Phone Call Screen
RemotePhone
Mute
Swap Call
Phone Call Screen
RemotePhone
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer to put the active call
on Hold and Answer the second call.
Press End Call + Answer
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
Bob Caller555-765-4321
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
RemotePhone RemotePhone Phone Remote
Labels On
Room O�
Phone Call Screens
Phone Call Screen
RemotePhone
Mute
RemotePhone
UnmuteMute
Phone Call Screen
RemotePhone
Mute
Swap Call
Phone Call Screen
RemotePhone
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming CallBob Caller
555-765-4321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer to End the active call
and Answer the second call.
3. If the active call is put on Hold and the second call is Answered using the Hold Call + Answer button on the Call Waiting Incoming Call screen, the Call Waiting Phone Call screen will appear.
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
5557654321
Incoming Call Waitng
Incoming Call
5557654321
RemotePhone RemotePhone Phone Remote
Just Talk
SurfLink Mic
Just Talk
SurfLink Mic
Labels On
Phone Call Screens
Phone Call Screen
RemotePhone
Just Talk
Mute
RemotePhone
Just Talk
UnmuteMute
Phone Call Screen
RemotePhone
Just Talk
Mute
Swap Call
Phone Call Screen
RemotePhone
Just Talk
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming Call
5557654321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
4. Press the Swap Call button
Incoming Call Phone Call Screen Pressed Remote Tab
Incoming Call
5557654321
Incoming Call Waitng
Incoming Call
5557654321
RemotePhone RemotePhone Phone Remote
Just Talk
SurfLink Mic
Just Talk
SurfLink Mic
Labels On
Phone Call Screens
Phone Call Screen
RemotePhone
Just Talk
Mute
RemotePhone
Just Talk
UnmuteMute
Phone Call Screen
RemotePhone
Just Talk
Mute
Swap Call
Phone Call Screen
RemotePhone
Just Talk
Swap Call
Do Not Answer
Hold Call+ Answer
End Call+ Answer
Incoming Call Waitng
Incoming Call
5557654321
Phone Call Waiting Screen
RemotePhone
Do Not Answer
Hold Call+ Answer
End Call+ Answer
to switch between the two calls by putting the active call on Hold.
4. You can mute your voice during a phone call by pressing the Mute button.
5. During any mobile phone call, use the Remote tab to make hearing device adjustments. The Favorite button
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
to make hearing device adjustments. The to make hearing device adjustments. The Left
Binaural
Right
Memory
Mute
Favorite
Home
provides an audio swap function during mobile phone calls, which allows the mobile call to be conducted on the mobile phone instead of streamed to the hearing devices via SurfLink Mobile. Press the Favorite button to disconnect the Bluetooth link between SurfLink Mobile and the mobile phone and conduct the call using the mobile itself. Press the Favorite button again to reestablish the Bluetooth connection between the mobile phone and SurfLink Mobile in order to stream the call to the hearing devices using SurfLink Mobile.
6. To end the call, press the End Call button.
Note: The SurfLink Mobile device should be kept within 1-2 meters/3-6 feet of the hearing devices during cell phone streaming.
A phone call is in progress and a second call is received from that phone (call waiting):
1. If an incoming call is received during an active mobile phone call, the Call Waiting Incoming Call screen will display:
![Page 13: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/13.jpg)
24 25
OperationO
pera
tion
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
iPod
The SurfLink Mobile directional microphone Focus
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
The SurfLink Mobile directional microphone Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
and omnidirectional microphone Surround
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
Input buttons are always available for selection.
The Wired Streaming Input button
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
will be available for selection when the wired Audio Line-In Adaptor is detected.
The Bluetooth Streaming Input button
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
will be available for selection when the Bluetooth antenna is On, at least one Bluetooth entertainment device has been paired with SurfLink Mobile and that entertainment device is On, within range of SurfLink Mobile and is playing audio. When multiple paired Bluetooth devices are available, the Bluetooth Streaming Input button will page through the list of available paired Bluetooth devices.
5. To end the active call, press the End Call button. The call on hold will become the active call.
Streaming Audio
The SurfLink Mobile device can be used to stream audio wirelessly:•FromaBluetoothentertainmentdevice•Viawiredinputfromanaudiodevice•FromtheSurfLinkMobiledevicemicrophones
To stream audio via SurfLink Mobile:
1. Navigate to the Streaming screen.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
2. Select the desired streaming input at the top of the screen by pressing the Input button.
![Page 14: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/14.jpg)
26 27
OperationO
pera
tion
4. Select Stop to end the audio streaming session.
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
StartStop
Streaming Screen
Note: The SurfLink Mobile device should be kept within 3-4 meters/9-12 feet of the hearing devices during audio streaming from the Streaming screen.
3. Select Start to begin streaming audio from theselected input.
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Start
Streaming
iPod
Start
Streaming Screen
Note: When you start a streaming session using the directional microphone Focus Input button
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
iPod
Start
Streaming
iPod
Start
Streaming
iPod
Start
Focus
Surround
Wired
Mobile
Phone
iPod
Laptop
Computer
Stereo
Car
Other
Start
Stop
Streaming
iPod
Start
Streaming Screen
and you select Start, a prompt will appear to remind you to point the SurfLink Mobile microphone toward the sounds that you want to hear. It is also important, especially in noisy environments, to move the SurfLink Mobile as close as possible tothe sound source.
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
Input
Room O�
Play
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Room O�
Play
Stop
Streaming Screen
![Page 15: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/15.jpg)
28 29
SettingsSett
ings
Tools
• Brightness – Adjust display brightness• Language – Select Language for text
• Screens – Set screen defaults and viewdevice information
Bluetooth
Turn the Bluetooth Antenna On/Off
1. Select Bluetooth from the Settings screen.
Settings
Tools
Hearing Devices
Bluetooth
Settings
Tools
Hearing Devices
Settings
Bluetooth
Normal
Scrolling List screens
Pressed
Scrolling List
Label
Label
Label
Pressed
Scrolling List
Settings Screens
2. To turn the Bluetooth antenna On, select the Bluetooth On button.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
Settings
To customize SurfLink Mobile settings, navigate to the Settings screen:
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Binaural Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
StreamingStreaming
Pressed Directional Mic. Graphic
Dir. Mic. Omni Mic. USB
Cell Phone Landline MP3 Player Computer
Television Stereo Automobile Other
Normal
Labels On
Streaming
Volume Graphic
Point device towardsound source
Streaming
Streaming
Input
Play
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Room O�
Play
Stop
Streaming Screen
Labels On
Streaming
Input
Play
Streaming Streaming
Input Input
Play Play
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
There are three main settings options to support the following functions:
Bluetooth
• Turn the Bluetooth antenna On/Off• Pair SurfLink Mobile with Bluetooth devices for
audio streaming• Manage paired Bluetooth entertainment devices
Hearing Devices
•SyncyourhearingdeviceswithSurfLink Mobile
![Page 16: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/16.jpg)
30 31
SettingsSett
ings
The Bluetooth antenna must be On to stream audio from your paired mobile phone or Bluetooth entertainment device.
3. To turn the Bluetooth antenna Off, select the Bluetooth Off button.
Bluetooth
Devices
Pairing Mode
The Bluetooth antenna should be Off if:
•Youdonotwishtostreamaudiofromyourpairedmobile phone or Bluetooth device
•YouwishtoconserveSurfLinkMobilebatterylife•Youaretravelingonanairplaneorareinanarea
in which wireless signals are not permitted
Pairing SurfLink Mobile with a Bluetooth entertainment device:
1. Select Bluetooth from the Settings screen.
Settings
Tools
Hearing Devices
Bluetooth
2. Ensure that the Bluetooth device with which you want to pair the SurfLink Mobile is turned On and is within 10 meters/30 feet of the SurfLink Mobile device.
3. Press the Pairing Mode button in the center of the screen. This button will remain active for the duration of the Bluetooth pairing process.
Bluetooth
Devices
Pairing Mode
![Page 17: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/17.jpg)
32 33
SettingsSett
ings
4. Confi rm pairing to SurfLink Mobile from the Bluetooth device. Some Bluetooth devices require that you enter the PIN of the device being paired; the SurfLink Mobile Bluetooth PIN is 0000.
5. Once the pairing process is complete, choose a graphic icon to label the device by pressing the Choose Device Label button.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
6. Once the graphic icon has been selected, the Bluetooth Devices screen will show the newly paired Bluetooth entertainment device in the list of paired Bluetooth devices.
Manage Paired Bluetooth Devices
1. Select Bluetooth from the Settings screen.
Settings
Tools
Hearing Devices
Bluetooth
2. Select the Devices button to view the list of paired Bluetooth devices.
Bluetooth
Devices
Pairing Mode
3. Select the device you want to manage to navigate to the screen for that device.
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
device_B
![Page 18: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/18.jpg)
34 35
SettingsSett
ings
4. Select the Change List Order button to move the device in the list using the up/down arrows.
5. Select the New Label button to choose a different graphic for the selected device. Once the label has been selected, the graphic will appear next to the device name in the list of paired devices.
6. Select the trash can button Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
Okay Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
to Delete the device pairing and remove the device fromthe list.
Bluetooth Connection Status
1. When a paired Bluetooth device is actively connected to SurfLink Mobile, the Bluetooth connectionsymbol
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
OK Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_BHandsfree + Media
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
will appear next to the device name onthe Bluetooth Devices screen.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
OK Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_BHandsfree + Media
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
2. To see detail regarding the type of Bluetooth connection in use between SurfLink Mobile and the Bluetooth device, select the button for the Bluetooth device to navigate to the screen for that device.
3. “Handsfree” will display when the devices are connected using the Bluetooth HandsFree Profi le (HFP), which is the type of connection required for mobile phone call streaming from the Phone screen. “Media” will display when the devices are connected using the Advanced Audio Distribution Bluetooth Profi le (A2DP), which is the type of connection required for audio streaming from a Bluetooth entertainment device from the Streaming screen.
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_B
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Settings
Tools
Hearing Devices
Bluetooth
Bluetooth
Devices
Pairing Mode
normal
normal pressed disabled
disabled
pressed
generic button - disabled
disabled
disabled text colorR71 G71 B71
normal pressed disabled
Computer
Phone
Stereo
Television
Automobile
MP3 Player
Other
Cell Phone
New Device
Choose Device Label
“device_C”
has been paired
successfully
Label
Phone
MP3 Player
Cell Phone
New Device
Retry Cancel
Bluetooth pairing
was unsuccessful
(error)
device_B
OK Cancel
device_B
Settings
Tools
Hearing Devices
Bluetooth
device_B
device_BHandsfree + Media
Change List Order
New Label
Devices
device_B
device_A
device_C
Bluetooth
Devices
Pairing Mode
Un-pair
Yes Cancel
Un-pair
device_B
from device?
Settings > Bluetooth Screens
![Page 19: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/19.jpg)
36 37
SettingsSett
ings
Hearing Devices
1. Select Hearing Devices from the Settings screen to view the serial numbers of the synced wireless hearing devices.
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
No devices
are synced
at this time
Sync New
Hearing Dev.
No devices
are synced
at this time
Sync New
Cancel
Open and close the battery
door of the hearing device(s)
you wish to Sync. Devices
will be automatically
detected and displayed.
Syncing
Select devices to sync
0123456789
9876543210
Play Tone Sync
Syncing Hearing Dev.
Synced Hearing Devices
0123456789
9876543210
Sync New
Hearing device
syncing is complete
Okay
Syncing
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Un-sync
0123456789
from device?
Un-Sync
Yes Cancel
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Settings > Hearing Devices Screens
Settings
Tools
Hearing Devices
Bluetooth
2. To Delete a synced hearing device, select the device serial number then press the trash can button
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
No devices
are synced
at this time
Sync New
Hearing Dev.
No devices
are synced
at this time
Sync New
Cancel
Open and close the battery
door of the hearing device(s)
you wish to Sync. Devices
will be automatically
detected and displayed.
Syncing
Select devices to sync
Play Tone Sync
Syncing Hearing Dev.
Synced Hearing Devices
0123456789
9876543210
Sync New
Hearing device
syncing is complete
Okay
Syncing
Settings
Tools
Hearing Devices
Bluetooth
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Un-sync
0123456789
from device?
Un-Sync
Yes Cancel
Hearing Dev.
Synced Hearing Devices
0123456789
Sync New
Settings > Hearing Devices Screens
Settings
Tools
Hearing Devices
Bluetooth
.
3. To sync SurfLink Mobile with new hearing devices and overwrite existing hearing device syncing, select the Sync New button to put the SurfLink Mobile device into syncing mode.
Note: SurfLink Mobile can be paired with one right and one left hearing device at a time.
4. Open and close the battery door of the hearing device you wish to sync with SurfLink Mobile.
5. The hearing devices will be detected by SurfLink Mobile. Select the hearing device serial numbers and press the Sync button to complete the syncing process.
Select devices to sync
5678901234
4321098765
Play Tone Sync
Syncing
6. The wireless hearing devices and SurfLink Mobile device will now work together as a wireless system.
![Page 20: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/20.jpg)
38 39
SettingsSett
ings
Tools
Brightness
1. Select Brightness from the Settings screen to adjust the touch screen display brightness.
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
2. Select the
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
or
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
buttons to adjust the display brightness.
3. Select OK to accept Touch Screen display brightness adjustments.
4. Select Cancel to reject adjustments and continue with previous brightness settings.
Language
1. Select Language from the Settings screen
2. Choose the desired language version from the list of available language translations.
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
English
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Settings > Tools Screens
3. Select OK to accept the new language selection.
4. Select Cancel to reject the change and continue with the previous language selection.
Screens
Device Options
1. Select either the Remote or Streaming screen as the Default screen when the SurfLink Mobile device is powered On.
![Page 21: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/21.jpg)
40 41
SettingsSett
ings
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
OK Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Default Screen:
Remote Streaming
Button Labels:
On O�
HideShow
Streaming Screen:
Screens
Stream Phone Ring:
O�
Hide
Just Talk Mode:
Screens
Select style of Remote:
Intermediate
Basic
Firmware version:
Serial number:
Settings > Tools Screens
Tools
Screens
Brightness
2. The selected default screen will show as active/highlighted in blue. SurfLink Mobile comes with the Remote screen set as the default screen.
3. Select Button Labels to be On or Off. SurfLink Mobile comes with the Button Labelsdefaulted On.
4. Select either Hide or Show to have the Streaming screen included in the screen navigation or not. SurfLink Mobile comes with the StreamingScreen shown.
Phone Options
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
OK Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Device Options
Phone Options
Remote Options
About
Screens
Default Screen:
Streaming
Button Labels:
O�
Hide
Streaming Screen:
Screens
Stream Phone Ring:
On O�
HideShow
Just Talk Mode:
Screens
Select style of Remote:
Intermediate
Basic
Firmware version:
Serial number:
Settings > Tools Screens
Tools
Screens
Brightness
1. Select Stream Phone Ring to be On or Off. SurfLink Mobile defaults to phone ring streaming Off. If this feature is turned On, the mobile phone ring tone will be streamed via SurfLink Mobile to the hearing devices for any incoing call.
2. Select Show or Hide to have JustTalk mode as an available option for Voice Pickup on the Phone Call screen. SurfLink Mobile comes set with Show as the default.
Note: Hiding JustTalk mode will extend hearingaid battery life while streaming mobilephone calls.
![Page 22: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/22.jpg)
42 43
SettingsSett
ings
Remote Options
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Screen Defaults
Show/Hide Streaming
Voice Pickup Options
Remote Options
Screens
Set as default screen:
Streaming
Button Labels:
O�
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Advanced
Intermediate
Basic
Settings > Tools Screens
Choose Advanced, Intermediate or Basic functions for the Remote screen by selecting the appropriate button. SurfLink Mobile comes set with Advanced as the default.
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
Basic
Remote Screen
Intermediate Advanced Pressed
Remote
Labels On
Remote Remote Remote
RemoteRemote RemoteRemote
Volume Graphic “Pressed” State
Graphic appears WHITE DURINGeach button press
Volume Graphic “Released” State
Graphic appears BLUE for 1/2 (?) secondAFTER each button press
Remote
Home
Favorite
Mute
Memory
Left Right
Left
Binaural
Right
Memory
Mute
Favorite
Home
About
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Normal Pressed
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Brightness
Okay Cancel
Brightness
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
Language
Bulgarian
Danish
Language
Yes Cancel
Set language
to English?
Settings
Tools
Hearing Devices
Bluetooth
Tools
Screens
Language
Brightness
ScreensScreens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set Default Screen
Show/Hide Streaming
Voice Pickup Options
Remote Options
About
Screens
Set as default screen:
Streaming
Button Labels:
Screens
Hide
Hide Streaming
Screen?
Screens
Hide
Hide Hearing Aid
Microphone from
Voice Pickup
options?
Screens
Select style of Remote
Intermediate
Basic
Screens
Firmware version:0.1.7.0
Serial number:0051276089
Settings > Tools Screens
The About screen provides device information.
![Page 23: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/23.jpg)
44 45
Waste from electronic equipment must be handled according to local regulations.
Instructions for Disposal of Old Electronics
Paradigm encourages, and your local community laws may require, that your SurfLink Mobile device be disposed of via your local electronics recycling/disposal process.
The below instructions are provided for the benefit of disposal/recycling personnel. Please include this manual with your device when disposing of your SurfLink Mobile device.
For Disposal/Recycling Personnel Only
This product contains a lithium Ion Polymer battery. To remove this battery:
• Removethetwoscrewsonthebackofthedevice
• Slidethebottomplateupslightlytoseparatethetopfrom the bottom
• Unplugthebatteryandtapetheconnectorendtopreventaccidental shorting
• Prythebatteryawayfromthebackplateusingawideflatblade
SurfLink Mobile is designed to comply with the most stringent Standards of International Electromagnetic Compatibility. However, it is still possible that you may experience interference caused by power line disturbances, airport metal detectors, electromagnetic fields from other medical devices, radio signals and electrostatic discharges.
If you use other medical devices or wear implantable medical devices such as defibrillators or pacemakers and are concerned that your SurfLink Mobile might cause interference with your medical device, please contact your physician or the manufacturer of your medical device for information about the risk of disturbance.
SurfLink Mobile should not be used during an MRI procedure.
Use on Aircrafts SurfLink Mobile should not be used on aircrafts unless specifically permittedbytheflightpersonnel.
International Use SurfLink Mobile is approved to operate at a radio frequency that is specific to your country or region and might not be approved for use outside your country or region. Be aware that operation during international travel may cause interference with other electronic devices, or other electronic devices may cause interference with your SurfLink Mobile.
The battery in your SurfLink Mobile is not replaceable. Do not attempt to replace the battery.
Required Information
![Page 24: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/24.jpg)
46 47
FCC ID: EOA-CPED IC: 6903A-CPED
Bluetooth Qualified Design Listing: B019453 FCC Notice This device complies with part 15 of the FCC rules and with RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Note FCC Cet appareil est conforme avec la partie15 des règles de la FCC et du RSS-210. L’utilisation est assujettie à deux conditions: (1) Cet appareil ne doit pas causer d’interférence nuisible et (2) ce dispositif doit accepter l’interférence reçue incluant l’interférence qui pourrait causer des opérations indésirables pour l’appareil.
Note: Le manufacturier n’est pas responsable de l’interférence créée par la modification de cet équipement lors de l’écoute du téléviseur ou de la radio. De telles modifications pourraient entrainer la révocation de l’autorité de l’utilisateur à opérer cet équipement.
Hereby, Paradigm declares that the SurfLink Mobile is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be obtained from the addresses below.
Paradigm, Inc. 6600 Washington Ave. South Eden Prairie, MN 55344 USA
Paradigm, Inc. European Headquarters Wm. F. Austin House, Bramhall Technology Park Pepper Road, Hazel Grove, Stockport SK7 5BX United Kingdom
FCC Information
![Page 25: Surflink Mobile for hearing aids Manual and data transmission over short distances between ... wireless hearing device, ... and slide the attachment out of](https://reader034.fdocuments.net/reader034/viewer/2022051800/5ad4be447f8b9a1a028c39af/html5/thumbnails/25.jpg)
© 2012 Paradigm, Inc. All Rights Reserved. 84934-007 8/12 BKLT0248-01-EE-XX Rev. B
Provided by: NewSound Hearing Aid Centers
1-877-55-SOUNDwww.newsoundhearing.com