Surface Mining Product Guide - Komatsu
Transcript of Surface Mining Product Guide - Komatsu
Form no: ZESB094000
Australia 1300 566 287 | komatsu.com.au Komatsu Mining 1300 367 569 | mining.komatsu
New Zealand 0800 566 2878 | komatsu.co.nz New Caledonia 43 53 06
Surface Mining Product Guide
2650CXPayload of 59 mtBucket capacity 31.1 m3
ELECTRIC ROPE SHOVELS
DUMP TRUCKS WHEEL DOZERS
MOTOR GRADERHYDRAULIC EXCAVATORSDOZERS
WHEEL LOADERS
HYBRID SHOVEL
SURFACE MINING
SFB-29Up to 2,000 tonnes (2,200 tons) p/h, Pick force up to 150,000 lbs.
SFB-38Up to 4,000 tonnes (4,400 tons) p/h,Pick force up to 350,000 lbs
SFB-40Up to 3,000 tonnes (3,300 tons) p/h,Pick force up to 300,000 lbs
SFB-41Up to 2,500 tonnes (2,750 tons) p/h,Pick force up to 200,000 lbs
SFB-42Up to 4,000 tonnes (4,400 tons) p/h,Pick force up to 200,000 lbs
SFB-43Up to 5,000 tonnes (5,500 tons) p/hPick force up to 350,000 lbs
SFB-44Up to 5,000 tonnes (5,500 tons) p/hPick force up to 300,000 lbs
FEEDER-BREAKERS
ELECTRIC WHEEL LOADERS
DRAGLINES
CONVEYOR PULLEYS
SFB44
JOY
44XTPull Down Force 4,538kgs
77XRMaximum bit loading 34,925 kg
44XT
77XR
L-135040,823 kg (90,000 lbs.) operating capacityPayload ratings ranging from 200 to 260 tons
L-185054,431 kg (120,000 lbs.) operating capacityPayload ratings ranging from 240 to 360 tons
L-235072,574 kg (160,000 lbs.) operating capacityPayload ratings ranging from 320 to 400+ tons
SOFT ROCK HARD ROCK CONSTRUCTION & UTILITY, QUARRY
SURFACE & OVERLAND CONVEYOR SYSTEMS & TERMINALS
Winch
2800XPCPayload of 59 mtDipper capacity of 26.8 to 33.6 m3
4100CPayload of 81.6 mtDipper capacity of 45.9 m3
4100CBOSSPayload of 90.7 mtDipper capacity of 44.3 m3
4100XPCPayload of 108.9 mtDipper capacity of 52.8 to 61.2 m3
4100XPC-AC-90Payload of 73 to 82 mtDipper capacity of 42 to 49 m3
4800XPCPayload of 122.5 mtDipper capacity of 65.7 to 70.3 m3
D375A-8FH 610 HP (455 kW)WT 72 tonnes
D475A-5E0664 kW / 890 HP WT 110 tonnes
D475ASD-5E0664 kW / 890 HPWT 116 tonnes
PC1250SP-8RWT 110.0 tonnes
PC2000-8WT 195 - 204 tonnes
PC3000-6WT 252 - 265 tonnes
PC4000-11 WT 388 - 399 tonnes
PC5500-6WT 533 - 552 tonnes
PC8000-6WT 752 - 777 tonnes
PC7000-11WT 677 - 691 tonnes
ALL Available in BACKHOE or FRONT SHOVEL configuration
WA800-3E0603 kW / 808 HPCAP 10.0 - 14.0 m³
WA900-3E0 638 kW / 856 HPCAP 11.5 - 13.0 m³
WA1200-61,316 kW / 1,765 HPCAP 18.0 - 35.0 m³
HD785-7 895 kW / 1,200 HPMPL 91 tonnes (100 tons)
HD1500-81,175 kW / 1,576 HP MPL 142 tonnes (156 tons)
730E-8 1,492 kW / 2,000 HPMPL 181 tonnes (200 tons)
830E-51,865 kW / 2,500 HPMPL 235 tonnes (259 tons)
930E-52,014 kW / 2,700 HPMPL 304 tonnes (335 tons)
930E-4SE2,610 kW / 3,500 HPMPL 290 tonnes (320 tons)
980E-52,610kW / 3,500 HPMPL 363 tonnes (400 tons)
WD600-6FH 527 HP (393 kW)WT 48.1 tonnes
WD900-3FH 853 HP (637 kW)WT 100.0 tonnes
GD825A-2FH 280 HP (209 kW)WT 29.3 tonnes
Conveyor starter Winch controller Carry Return Impact Flat Garland
CONVEYOR IDLERS
BLASTHOLE DRILL
HAC Systems20° to 90° vertical liftUphill or Downhill600mm to 3200mm wide belts
Gravity take-up
SFB-32Up to 3,000 tonnes (3,300 tons) p/h,Pick force up to 150,000 lbs
285XPCMaximum bit loading 53,524 kg
320XPCMaximum bit loading 68,038 kg
250XPCMaximum bit loading 40,823 kg
9010C42 to 60 m3 bucket capacity range84 to 107 m boom length range
9020C55 to 93m3 bucket capacity range90 to 125 m boom length range
9020XPC85 to 122 m3 bucket capacity range100 to 130 m boom length range
RECLAIM FEEDERS
RF-5Up to 2,000 tonnes (2,200 tons) p/hour
RF-7Up to 3,600 tonnes (4,000 tons) p/hour
RF-27Up to 2,000 tonnes (2,200 tons) p/hour
Transfer Tower (JIB)Elevated conveyor Ground Modules Drive frame Impact loading station Tail frame
Drive pulleys (Ceramic & FRAS Rubber lagged)
Non-Drive pulleys (Ceramic & FRAS Rubber lagged)
Steel roller & Aluminium roller
Run Red Poly Roller
Impact Roller Rubber disc return
600mm to 3200mm wide belts
600mm to 3200mm wide belts 600mm to 3200mm wide belts
600mm to 3200mm wide belts
CONVEYOR IDLERS
HAC SYSTEMS
SIZERS
iXRS/XRS 600Up to 1800 MTPH, 0-800mm feed size150/200 (mm) Standard Product Size
XRS/DRX 800Up to 3000 MTPH, 0-100mm feed size150/200/250 (mm) Standard Product Size
JOY
DRS1000
DRX 1000Up to 5000 MTPH, 0-1200mm feed size200/250/300 (mm) Standard Product Size
MVT-II 600Up to 1000 MTPH @ -50mm, 0-250 (mm) feed size 25/38/50 (mm) Standard Product Size
MVT-II 800Up to 0-1800 MTPH @ -50mm, 0-350 (mm) feed size 50/100 (mm) Standard Product Size