Surface Conveyor - go.sonnysdirect.com
2
Conveyor Conveyor Features: Easy maintenance through access doors. New log chain case hardened sprocket for maximum durability. Heco direct drive gear box with hydraulic motor. Driver-side guide rail covered with UHMW plastic to protect rims. Surface Conveyor Sonny’s heavy-duty Surface Conveyor requires only a small pit at the entrance and exit and is the ideal solution for existing buildings or where other constraints call for a limited amount of concrete work. Specifications Tire Clearance Required 12-1/2in Vehicle Clearance Required 4-1/2in Hydraulic Required Varies, based on length Air Required 2CFM @ 120PSI Floor Plate 5/16in Finish Painted Steel Features • 14ft roller spacing with reliable air-over-oil chain tensioning system provides consistent tension and easily collapses for faster servicing with less downtime. • Features a 5/16in base plate and 5/8in steel log chain for incredible strength, reliability, and life expectancy. • 3in x 3in x 1/2in UHMW guide rail is installed on the driver side to provide wheel rim protection. Front Wheel Pull on Demand Includes: • Entrance Box • Entrance Section • Roller-Up Section, FWP • Filler Section, FWP only • Exit Section • Exit Drive Box Rear Wheel Push on Demand Includes: • Entrance Box • Entrance Section • Roller-Up Section, RWP • Filler Section, RWP only • Exit Section • Exit Drive Box
Transcript of Surface Conveyor - go.sonnysdirect.com
Conveyor
Conveyor Features:
Easy maintenance through access doors.
New log chain case hardened sprocket for maximum durability.
Heco direct drive gear box with hydraulic motor.
Driver-side guide rail covered with UHMW plastic to protect rims.
Surface Conveyor
Sonny’s heavy-duty Surface Conveyor requires only a small pit at the entrance and exit and is the ideal solution for existing buildings or where other constraints call for a limited amount of concrete work.
SpecificationsTire Clearance Required 12-1/2in
Vehicle Clearance Required 4-1/2in
Hydraulic Required Varies, based on length
Air Required 2CFM @ 120PSI
Floor Plate 5/16in
Finish Painted Steel
Features• 14ft roller spacing with reliable air-over-oil chain tensioning system provides consistent tension and easily collapses for faster servicing with less downtime.• Features a 5/16in base plate and 5/8in steel log chain for incredible strength, reliability, and life expectancy.• 3in x 3in x 1/2in UHMW guide rail is installed on the driver side to provide wheel rim protection.
Front Wheel Pull on Demand Includes:• Entrance Box • Entrance Section• Roller-Up Section, FWP • Filler Section, FWP only • Exit Section• Exit Drive Box
Rear Wheel Push on Demand Includes:• Entrance Box • Entrance Section • Roller-Up Section, RWP• Filler Section, RWP only • Exit Section • Exit Drive Box
© 2020 SONNY’S Enterprises, LLC. All prices & availability subject to change without notice.
www.SonnysDirect.com 1-800-327-8723
SYSTEMS
VA
CU
UM
SSU
PP
OR
TC
ON
TRO
LSSIG
NA
GE
WASH MORE CARSEQ
UIP
MEN
T
CONVEYOR LENGTH ALL ROLLER-UP FRONT WHEEL PULL
ON DEMANDREAR WHEEL PUSH
ON DEMAND
45ft $28,746.00 $31,026.00 $34,814.00
50ft $30,687.00 $32,967.00 $36,758.00
55ft $31,726.00 $34,002.00 $37,794.00
60ft $33,667.00 $35,942.00 $39,735.00
65ft $34,964.00 $37,253.00 $41,043.00
70ft $36,906.00 $39,194.00 $42,986.00
75ft $37,953.00 $40,228.00 $44,026.00
80ft $40,176.00 $42,175.00 $45,967.00
85ft $41,193.00 $43,479.00 $47,272.00
90ft $43,145.00 $45,426.00 $49,371.00
95ft $44,180.00 $46,461.00 $50,253.00
100ft $46,126.00 $48,402.00 $52,194.00
105ft $47,431.00 $49,707.00 $53,499.00
110ft $49,372.00 $51,648.00 $55,446.00
115ft $50,412.00 $52,687.00 $56,479.00
120ft $52,354.00 $54,629.00 $58,421.00
125ft $53,387.00 $55,694.00 $59,456.00
130ft $55,329.00 $57,610.00 $61,402.00
Material ID: CONV_SUR
*Requires 1/4in x 2-1/4in hammer-set anchor every 12in
Surface Conveyor Configuration Options:
All Roller-Up: Simple and reliable, Sonny’s All Roller-Up Conveyor provides an affordable option for low-volume or hand wash tunnels to utilize a conveyor where building constraints call for a limited amount of concrete work.
Front Wheel Pull: Vehicle is driven onto the surface conveyor until the front wheel of that vehicle passes the roller-up opening in the conveyor. The automated roller-up cylinder sends a roller to pull the front driver-side wheel and send the vehicle through the wash process.
Rear Wheel Push: A specialized section allows the roller to surface further along the conveyor path. Once the vehicle is placed over the conveyor, the automated roller-up cylinder sends a roller to push the back driver side wheel and send the vehicle through the wash process.
60in
Sonny’s Conveyor Kick Off PlateGuides vehicle tire off the exit end of the conveyor for a smoother transition and to prevent roller jams• 5/16in thick steel construction• Pre-drilled anchoring holes for easy installation• Recommended for front wheel and surface conveyor
Sonny’s Conveyor Tracking PadReduce the potential for vehicles to jump the conveyor when pulled by the front wheel. Sonny’s Conveyor Tracking Pad fine tunes vehicle alignment on an ultra-low friction surface to prevent damage to rims and conveyor rails. Material is HDPE Black and Pad Thickness .250in. Recommended for front wheel and surface conveyor.
OPTION 1
OPTION 2
OPTION 3
ITEM NO. DESCRIPTION PRICE
20003743 Kick off Plate, 5ft Conveyor $543.73
ITEM NO. DESCRIPTION PRICE
10013240 Conveyor, Tracking Pad 130ft Roll $2,598.96
10013084 Conveyor, Tracking Pad 100ft Roll $2,078.96
10013083* Conveyor,Tracking Pad UHMW Retainer 10ft $103.95
10013265 Conveyor Tracking Pad Anchors Box 100 $30.55
