SUPPORTING SYSTEMS AND PRODUCTS - ids Implants LLC...IMPLANT SYSTEMS idsimplants.com 866-277-5662 3...

I M P L A N T S Y S T E M S

SUPPORTING SYSTEMS AND PRODUCTS

ReflectAspire

Astra TechOsseoSpeedTM

TX

ReflectCertus

Biomet 3iTM

TaperedCertain®

ReflectRapid

Nobel Active®

ReflectRecover

Nobel Replace® Select CC

ReflectTapered Screw

Zimmer®

Tapered Screw Vent®

Compatibility with Direct Brands

AIRCLEANTM IMPLANT MAINTENANCE SYSTEM

SMART DENTIN GRINDERTM | LITETOUCHTM ALL-TISSUE LASER

CEMPLANTTM IMPLANT CEMENT

2 idsimplants.com 866-277-5662

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Reflect Implant Fixtures . . . . . . . . . . . . . . . . . . . . 7

Reflect Tapered Screw . . . . . . . . . . . . . . . . . . . . 8

Reflect Rapid/Recover . . . . . . . . . . . . . . . . . . . 13

Reflect Aspire . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Reflect Certus . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reflect Multi-Unit Abutment System . . . . . . . . . 28

Reflect Surgical Kits . . . . . . . . . . . . . . . . . . . . . 30

LiteTouch All-Tissue Laser . . . . . . . . . . . . . . . . . 36

AirClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

CemPlant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Smart Dentin Grinder . . . . . . . . . . . . . . . . . . . . 39

I M P L A N T S Y S T E M S


Reflect® Implant Systems offer surgical and prosthetic compatibility with “BIG” brands

but do so at a fraction of the cost – up to 80% less – while at the same time,

offering uncompromised quality and performance .

Compatible with “BIG” brands at up to 80% less.

ReflectAspire

Astra TechOsseoSpeedTM

TX

ReflectCertus

Biomet 3iTM

TaperedCertain®

ReflectRapid

Nobel Active®

ReflectRecover

Nobel Replace® Select CC

ReflectTapered Screw

Zimmer®

Tapered Screw Vent®

Compatibility with Direct Brands

Competitive products noted above are not registered trademarks of ids.

4 idsimplants.com 866-277-56624 idsimplants.com 866-277-5662

REFLECT IMPLANT SYSTEMS

Titanium packaging prevents contamination

4

Reflect Implant Systems offer surgical and prosthetic compatibility

with “BIG” brands but do so at a fraction of the cost – up to 80% less –

while at the same time, offering uncompromised quality and performance .

Reflect Implants have been tested in accordance with FDA Medical Device

Standards to demonstrate strength and their ability to withstand long-term

functional loading when compared to the original manufacturer, according to

ISO standards . These tests validate that Reflect Implants are comparable to

the original, assuring long-term reliability when placed under functional loading .

Reflect Implants are manufactured with a state-of-the-art S-L-A surface

treatment procedure that creates macro, micro, and nano surface structures

that enhance the bone to implant contact (BIC) . This surface treatment has

been established as the “gold standard” of the dental implant industry .

The sand-blasting, acid etching, and extensive cleaning of the Reflect

surface (S-L-A) achieve desired morphology for osseointegration . The

cleaning process also removes undesired residues derived from processing;

yielding clean surfaces that generate stable titanium-oxide layer enhancing

osseointegration .

You can incorporate Reflect Implants with a high degree of confidence .

You’ll know that you are providing your patients with one of the highest quality

precision-manufactured dental implant systems that is not only backed by a

no-nonsense warranty, but is sure to provide better outcomes for you and

your patients .

Reflect Implants Packaging

Reflect Implants’ multi-stage extensive cleaning process removes residues

and yields a contamination-free surface . That surface is then protected from

contamination by packaging the implant in a Titanium sleeve . Our packaging

ensures that the implant is only in contact with Titanium until you remove it

for surgical placement .

SEM demonstrates the intimate interface between implant and abutment.

SEM demonstrates the desired S-L-A texturing.

Documented better fit and seal

“BIG” brand abutment on Reflect Rapid Implant

“BIG” brand abutment on a “BIG” brand implant

Super-clean S-L-A surface treatment.

Straight 15º

Esthetic Abutments

Open Tray Scan Abutment

Scan Abutment

Open Tray Impression

Stock Abutment

Ti Blank, Ti Base or Plastic UCLA

Closed Tray

Closed Tray Impression

Implant Analogs

Custom Abutment

TemporaryCylinderEngaging

Healing Abutment Cover Screw

Implant

OR

5 idsimplants.com 866-277-5662 5 idsimplants.com 866-277-5662

SINGLE UNIT FLOW CHART


Implant

MUA Prosthetic Screw

MUA Abutment Analog

*MUA Abutment Screwincluded with Abutment

MUA Healing Cap

MUA Scan Body

Closed Tray

Open Tray

Scan

MUA Impression Copings

MULT-UNIT FLOW CHART

MUA Temporary Cylinder & Screw

MUA Abutments

One PieceStraight 17º 30º

MUA Abutment Screw*

RA3085C* RA3010C* RA3011C* RA3013C* RA3015C*

RA3585C RA3510C RA3511C RA3513C RA3515C




RT3708C RT3710C RT3711C RT3713C RT3716C



8 10 11.5 13 16

DIAM

ETER

3.7

4.1

4.7Compatible with Zimmer® Tapered Screw Vent®

FIXTURE LENGTH (MM)

Compatible with Nobel Active®

DIAM

ETER

3.0

3.5

4.3

5.0

5.5

PMS 200 m100 y80 k20

PMS 2995 C90 M11

FIXTURE LENGTH (MM) 8.5 10 11.5 13 15


RS3508C RS3509C RS3511C RS3513C RS3515C


RS4508C* RS4509C* RS4511C* RS4513C* RS4515C*

RS5008C* RS5009C RS5011C RS5013C RS5015C

8 9 11 13 15

DIAM

ETER

3.5

4.0

4.5

5.0Compatible withAstra Tech OsseoSpeedTM TX

RC3485C RC3410C RC3411C RC3413C RC3415C


RC5085C RC5010C RC5011C RC5013C

8.5 10 11.5 13 15

DIAM

ETER

3.4

4.1

5.0

RR3508C RR3510C RR3511C RR3513C RR3516C



8 10 11.5 13 16

DIAM

ETER

3.5

4.3

5.0

PMS 7637 c34 m100 y57 k29

PMS 5415 c56 m24 y11 k34

FIXTURE LENGTH (MM)

FIXTURE LENGTH (MM)

FIXTURE LENGTH (MM)

*Available April 2020

*MUA Abutment Screwincluded with Abutment

All fixtures include cover screw.

Compatible with Biomet 3iTM Tapered Certain®

Compatible with Nobel Replace® Select CC




8 10 11.5 13 16

DIAM

ETER

3.7

4.1

4.7Compatible with Zimmer® Tapered Screw Vent®

FIXTURE LENGTH (MM)

Compatible with: Zimmer® Tapered Screw-Vent®


RTHAS333 Reflect Tapered Healing Abutment 3.5 x 3.5 x 3 H

RTHAS335Reflect Tapered Healing Abutment 3.5 x 3.5 x 5 H

RTHAF343 Reflect Tapered Healing Abutment 3.5 x 4.7 x 3 H






Healing Abutments

RTCIC33 Reflect Tapered Transfer IC 3.5 x 3.5 D x 10 H

RTCIC34Reflect Tapered Transfer IC 3.5 x 4.7 D x 10 H



RTOIC33 Reflect Tapered Open-Tray3.5 x 3.5 D x 10 H

RTOIC34 Reflect Tapered Open-Tray 3.5 x 4.7 D x 10 H



(Open and Closed-Tray Transfers Include Guide Pin)

Open-Tray Transfers Closed-Tray Transfers

Refle

ct T

aper

ed S

crew


RTIA35 Reflect Tapered Implant Analog 3.5 Platform

RTIA45 Reflect Tapered Implant Analog 4.5 Platform

RTIA57Reflect Tapered Implant Analog 5.7 Platform

Implant Analog Scan Abutments

RTEN35 Reflect Tapered Temporary Abutment Engaging 3.5



RTNE35 Reflect Tapered Temporary Abutment Non-Engaging 3.5



Temporary Abutments

RTSAA3 Reflect Tapered Scan Abutment Anterior 3.5 mm

RTSAA4 Reflect Tapered Scan Abutment Anterior 4.5 mm

RTSAP3 Reflect Tapered Scan Abutment Posterior 3.5 mm

RTSAP4 Reflect Tapered Scan Abutment Posterior 4.5 mm

Scan Abutments

8 10 11.5 13 16

Refle

ct

TA

PE

RE

D S

CR

EW

IMP

LA

NT

SY

ST

EM



Refle

ct

TA

PE

RE

D S

CR

EW

IMP

LA

NT

SY

ST

EM


(Temporary Abutment include Titanium Screw and Guide Pin)

Straight Abutments

RTS350 Reflect Tapered Straight Abutment 3.5 Platform x 1.5 mm Cuff

RTS450 Reflect Tapered Straight Abutment4.5 Platform x 1.5 mm Cuff



RT4535 Reflect Tapered Ti Abutment 3.5 x 4.5 L

RT0635 Reflect Tapered Ti Abutment 3.5 x 6 L



RT0645 Reflect Tapered Ti Abutment 4.5 x 6 L

RT0657 Reflect Tapered Ti Abutment 6 x 5.7 L

Ti Abutments

RTTESP3 Reflect Tapered Esthetic Abutment Anterior Straight 3.5

RTTEAS4 Reflect Tapered Esthetic Abutment Anterior 4.5

RTTEAA3 Reflect Tapered Esthetic Abutment Anterior 15° 3.5

RTTEAA4 Reflect Tapered Esthetic Abutment Anterior 15° 4.5

RTTEPS4 Reflect Tapered Esthetic Abutment Posterior 4.5

RTTEPW4 Reflect Tapered Esthetic Abutment Posterior Wide 4.5

RTTEAP4 Reflect Tapered Esthetic Abutment Posterior 15° 4.5

Esthetic Abutments

RTLAEN35 Reflect Tapered Screw UCLA Plastic Abutment Engaging 3.5



RTLANE35 Reflect Tapered UCLA Plastic Abutment Non-Engaging 3.5



UCLA Plastic Abutments

Screw Included

Screw Included

Screw Included

RT173503 Reflect Tapered Screw 17° MUA 3.5 x 3 mmH







RT3501 Reflect Tapered Screw MUA 3.5 x 1 mmH






RT173502Reflect Tapered Screw 17° MUA 3.5 x 2 mmH

Multi-Unit Abutments

Screw Included

Refle

ct

RA

PID

IMP

LA

NT

SY

ST

EM


Refle

ct

TA

PE

RE

D S

CR

EW

IMP

LA

NT

SY

ST

EM



Titanium Blanks

RTTB35 Reflect Tapered Ti Abutment Blank 3.5 mm

RTTB45 Reflect Tapered Ti Abutment Blank 4.5 mm

Titanium Screws and Guide Pins

RTTS35 Reflect Tapered Titanium Screw 3.5 mm

RTGP50 Reflect Tapered Guide Pin

Screw included with 17 degree and 30 degree


Compatible with: Nobel Active®

and Nobel Replace® Select CC

Cover Screws


RACS30 Reflect Rapid/Recover Cover Screw 3.0

RACSNPReflect Rapid/Recover Cover Screw NP

RACSRPReflect Rapid/Recover Cover Screw RP

RACSWPReflect Rapid/Recover Cover Screw WP

All Reflect Rapid and Recover prosthetic components are compatible.






Refle

ct R

apid

Compatible with Nobel Active®

8.5 10 11.5 13 15

DIAM

ETER

3.0

3.5

4.3

5.0

5.5

FIXTURE LENGTH (MM)




Refle

ct R

ecov

er

8 10 11.5 13 16

DIAM

ETER

3.5

4.3

5.0Compatible withNobel Replace®

Select CC

FIXTURE LENGTH (MM)

*Available April 2020All fixtures include cover screw.



Refle

ct

RA

PID

/RE

CO

VE

R IM

PL

AN

T S

YS

TE

MS




RAHAS3N Reflect Rapid Healing Abutment NP3.5 x 3 H

RAHAS5N Reflect Rapid Healing Abutment NP 3.5 x 5 H

RAHAS3R Reflect Rapid Healing Abutment RP4.3 x 3 H

RAHAS5R Reflect Rapid Healing Abutment RP4.3 x 5 H

RAIANPReflect Rapid Implant Analog NP

RAHAF3N Reflect Rapid Healing Abutment NP4.7 x 3 H

RAHAF5N Reflect Rapid Healing Abutment NP4.7 x 5 H

RAHAF3R Reflect Rapid Healing Abutment RP5.7 x 3 H

RAHAF5R Reflect Rapid Healing Abutment RP5.7 x 5 H

RAIARP Reflect Rapid Implant Analog RP

Healing Abutments

Implant Analogs

RAOICSN Reflect Rapid Open-Tray Transfer 3.5 mm NP

RAOICSR Reflect Rapid Open-Tray Transfer 4.3 mm RP

RAOICFN Reflect Rapid Open-Tray Transfer 4.7 mm NP

RAOICFR Reflect Rapid Open-Tray Transfer 5.7 mm RP

RACICSN Reflect Rapid Closed-Tray Transfer 3.5 D NP

RACICSR Reflect Rapid Closed-Tray Transfer 4.3 D RP

RACICFN Reflect Rapid Closed-Tray Transfer 4.7 D NP

RACICFR Reflect Rapid Closed-Tray Transfer 5.7 D RP







RABVCENP Reflect Rapid Temporary AbutmentEngaging NP

RABVCERP Reflect Rapid Temporary AbutmentEngaging RP

RABVNENP Reflect Rapid Temporary Abutment Non-Engaging NP

RABVNERP Reflect Rapid Temporary AbutmentNon-Engaging RP

Temporary Abutments

RRLSANP Reflect Rapid Scan Abutment (3-pack) NP

RRLSARP Reflect Rapid Scan Abutment (3-pack) RP

RRSAANP Reflect Rapid Scan Abutment Anterior NP

RRSAARP Reflect Rapid Scan Abutment Anterior RP

RRSAPNP Reflect Rapid Scan Abutment Posterior NP

RRSAPRP Reflect Rapid Scan Abutment Posterior RP

Scan Abutments

Screw Included

Screw Included

RATESANP Reflect Rapid Esthetic Abutment 3mm Anterior Straight NP

RATESARP Reflect Rapid Esthetic Abutment 3mm Anterior Straight RP

RATESPRP Reflect Rapid Esthetic Abutment 3mm PosteriorStraight RP

RATE15NP Reflect Rapid Esthetic Abutment 3mm Anterior 15° NP

RATE1ARP Reflect Rapid Esthetic Abutment 3mm Anterior 15° RP

RATE1PRP Reflect Rapid Esthetic Abutment 3mm Posterior 15° RP

Esthetic Abutments


Screw Included


Refle

ct

RA

PID

/RE

CO

VE

R IM

PL

AN

T S

YS

TE

MS



RATA30NP Reflect Rapid Ti Abutment NP3.0 mmH

RATA30RP Reflect Rapid Ti Abutment RP3.0 mmH

RATA45NP Reflect Rapid Ti Abutment NP4.5 mmH

RATA45RP Reflect Rapid Ti Abutment RP4.5 mmH

RATA60NP Reflect Rapid Ti Abutment NP6 mmH

RATA60RP Reflect Rapid Ti Abutment RP6 mmH

Ti Abutments

Ti Blanks

RAUCENNP Reflect Rapid UCLA Plastic Abutment Engaging NP

RAUCENRP Reflect Rapid UCLA Plastic Abutment Engaging RP

RAUCNENP Reflect Rapid UCLA Plastic Abutment Non-Engaging NP

RAUCNERP Reflect Rapid UCLA Plastic Abutment Non-Engaging RP


Screw Included

Screw Included

RATBNP Reflect Rapid Ti Abutment NPBlank

RATBRP Reflect Rapid Ti Abutment RPBlank

RAGP20NP Reflect Rapid Guide Pin Implant Lvl 20 mm NP-5 Pack

RAGP20RP Reflect Rapid Guide Pin Implant Lvl 20 mm RP-5 Pack

Guide Pins





RMURASNP Reflect Rapid Angled Multi-Unit Abutment Screw NP

RMURASRP Reflect Rapid Angled Multi-Unit Abutment Screw RP

RMURPSUD Reflect Rapid Multi-Unit Prosthetic Screw

RAMU15NP Reflect Rapid MUA 1.5 mmH NPNon-Engaging

RAMU15RP Reflect Rapid MUA 1.5 mmH RP Non-Engaging

RAMU25NP Reflect Rapid MUA 2.5 mmH NPNon-Engaging

RAMU25RP Reflect Rapid MUA 2.5 mmH RPNon-Engaging

RAMU35NP Reflect Rapid MUA 3.5 mmH NP Non-Engaging



RA1725NP Reflect Rapid 17° MUA 2.5 mmH NP Engaging

RA1725RP Reflect Rapid 17° MUA 2.5 mmH RPEngaging

RA1735NP Reflect Rapid 17° MUA 3.5 mmH NPEngaging


RA3035NP Reflect Rapid 30° MUA 3.5 mmH NPEngaging


RA3045NP Reflect Rapid 30° MUA 4.5 mmH NP Engaging

RA3045RP Reflect Rapid 30° MUA 4.5 mmH RP Engaging


Multi-Unit Abutment Screws



Refle

ct A

spire

8 9 11 13 15

DIAM

ETER

3.5

4.0

4.5

5.0


Refle

ct

AS

PIR

E IM

PL

AN

T S

YS

TE

M

Compatible with: Astra Tech OsseoSpeedTM TX

RSHA342 Reflect Aspire 3.5/4.0 Healing Abutment 4.0 D x 2 H







RSHA452Reflect Aspire 4.5/5.0 Healing Abutment 5.5 D x 2 H






Healing Abutments

Compatible withAstra Tech OsseoSpeedTM TX

FIXTURE LENGTH (MM)



RS4508C* RS4509C* RS4511C* RS4513C* RS4515C*

RS5008C* RS5009C RS5011C RS5013C RS5015C

*Available April 2020

RMURPSUD Reflect Rapid Multi-Unit Prosthetic Screw




RSIA3540 Reflect Aspire Implant Analog 3.5/4.0

RSGP3540 Reflect Aspire Guide Pin 3.5/4.0

RSIA4550 Reflect Aspire Implant Analog 4.5/5.0

RSGP4550 Reflect Aspire Guide Pin 4.5/5.0

Implant Analogs

Guide Pins

RSICO40S Reflect Aspire Open-Tray Transfer 3.5/4.0 x 4.0 D x 10 H

RSICO40F Reflect Aspire Open-Tray Transfer 3.5/4.0 x 5.0 D x 10 H

RSICO50S Reflect Aspire Open-Tray Transfer 4.5/50 x 5.0 D x 10 H

RSICO50F Reflect Aspire Open-Tray Transfer 4.5/50 x 6.0 D x 10 H


RSICC40S Reflect Aspire Closed-Tray Transfer 3.5/4.0 x 4.0 D x 10 H

RSICC40F Reflect Aspire Closed-Tray Transfer 3.5/4.0 x 5.0 D x 10 H

RSICC50S Reflect Aspire Closed-Tray Transfer 4.5/5.0 x 5.0 D x 10 H

RSICC50F Reflect Aspire Closed-Tray Transfer 4.5/5.0 x 6.0 D x 10 H

RSSA3540 Reflect Aspire Scan Abutment, Anterior 3.5/4.0

RSSA4550 Reflect Aspire Scan Abutment, Anterior 4.5/5.0

RSSL3540 Reflect Aspire Scan Abutment (3-pack) 3.5/4.0

RSSL4550 Reflect Aspire Scan Abutment (3-pack) 4.5/5.0

RSSP3540 Reflect Aspire Scan Abutment, Posterior, 3.5/4.0

RSSP4550 Reflect Aspire Scan Abutment, Posterior, 4.5/5.0

Scan Abutments



Refle

ct

AS

PIR

E IM

PL

AN

T S

YS

TE

M



Temporary Abutments

RSUC3540 Reflect Aspire UCLA Plastic Abutment Engaging 3.5/4.0

RSUC4550 Reflect Aspire UCLA Plastic Abutment Engaging 4.5/5.0

RSUCN3540 Reflect Aspire UCLA Plastic Abutment Non-Engaging 3.5/4.0

RSUCN4550 Reflect Aspire UCLA Plastic Abutment Non-Engaging 4.5/5.0

RSBV3540 Reflect Aspire Temporary Abutment 3.5/4.0 Engaging

RSBV4550 Reflect Aspire Temporary Abutment 4.5/5.0 Engaging

RSBVN3540 Reflect Aspire Temporary Abutment 3.5/4.0 Non-Engaging

RSBVN4550 Reflect Aspire Temporary Abutment 4.5/5.0 Non-Engaging

RSTA3540 Reflect Aspire Ti Abutment3.5/4.0

RSTA4550 Reflect Aspire Ti Abutment 4.5/5.0

RSTA43540 Reflect Aspire Ti Abutment 4.5 mmH 3.5/4.0

RSTA44550 Reflect Aspire Ti Abutment 4.5 mmH 4.5/5.0

RSTA63540 Reflect Aspire Ti Abutment 6 mmH 3.5/4.0

RSTA64550 Reflect Aspire Ti Abutment 6 mmH 4.5/5.0

RSTAN43540 Reflect Aspire Ti Abutment 4.5 mmH Non-Engaging 3.5/4.0

RSTAN44550 Reflect Aspire Ti Abutment 4.5 mmH Non-Engaging 4.5/5.0

Ti Abutments

Screw Included

Screw Included

Screw Included



RSTS3540 Reflect Aspire Ti Screw3.5/4.0

RSTS4550 Reflect Aspire Ti Screw4.5/5.0

RSEA153540 Reflect Aspire 15° Ti Esthetic Abutment Anterior3.5/4.0 C3/4.3

RSEA154550 Reflect Aspire 15° Ti Esthetic Abutment Anterior 4.5/5.0 C3/4.3

RSEA3540 Reflect Aspire Ti Esthetic Abutment Anterior3.5/4.0 C3/4.3

RSEA4550 Reflect Aspire Ti Esthetic Abutment Anterior4.5/5.0 C3/4.3

RSEP153540 Reflect Aspire 15° Ti Esthetic Abutment 3.5/4.0 C1.5/2.8

RSEP154550 Reflect Aspire 15° Ti Esthetic Abutment4.5/5.0 C1.5/2.8

RSEP3540 Reflect Aspire Ti Esthetic Abutment 3.5/4.0 C1.5/2.8

RSEP4550 Reflect Aspire Ti Esthetic Abutment4.5/5.0 C1.5/2.8

Ti Esthetic Abutments

Ti Screws

Screw Included


Refle

ct

AS

PIR

E IM

PL

AN

T S

YS

TE

M



RSMU13540 Reflect Aspire MUA 1.5 mmH 3.5/4.0 Non-Engaging







RSM1723540 Reflect Aspire 17° MUA 2.5 mmH 3.5/4.0 Engaging









RSMS4550 Reflect Aspire Angled MUA Screw 4.5/5.0

RSMUS3540 Reflect Aspire Angled MUA Screw 3.5/4.0




Compatible with: Biomet 3iTM Tapered Certain®

PMS 5415 c56 m24 y11 k34

Refle

ct C

ertu

s

Compatible withBiomet 3iTM

Tapered Certain®



RC5085C RC5010C RC5011C RC5013C

8.5 10 11.5 13 15

DIAM

ETER

3.4

4.1

5.0

FIXTURE LENGTH (MM)

RCHA3382 Reflect Certus 3.4 Healing Abutment3.4 D x 2 H

RCHA3383 Reflect Certus 3.4 Healing Abutment 3.4 D x 3 H


RCHA3386Reflect Certus 3.4 Healing Abutment 3.4 D x 6 H

RCHA4412 Reflect Certus 4.1 Healing Abutment4.1 D x 2 H



RCHA4416Reflect Certus 4.1 Healing Abutment 4.1 D x 6 H

RCHA4502 Reflect Certus 4.1 Healing Abutment5 D x 2 H

Healing Abutments

RCHA4503 Reflect Certus 4.1 Healing Abutment 5 D x 3 H


RCHA4602 Reflect Certus 4.1 Healing Abutment 6 mm x 2 H

RCHA4603 Reflect Certus 4.1 Healing Abutment6 D x 3 H







Refle

ct

CE

RT

US

IMP

LA

NT

SY

ST

EM

PMS 5415 c56 m24 y11 k34


RCIA34 Reflect Certus Implant Analog (Single) 3.4 mm



Implant Analogs


RCICC34S Reflect Certus Closed-Tray Transfer 3.4 x 3.4 D x 10 H

RCICC34F Reflect Certus Closed-Tray Transfer 3.4 x 4.0 D x 10 H

RCICC41S Reflect Certus Closed-Tray Transfer 4.1 x 4.1 D x 10 H


RCICC50S Reflect Certus Closed-Tray Transfer 5.0 x 5.0 D x 10H


RCICO34S Reflect Certus Open-Tray Transfer 3.4 x 3.4 D x 10 H

RCICO34F Reflect Certus Open-Tray Transfer 3.4 x 4.0 D x 10 H





RCGS20 Reflect Certus Guide Pin (5)




PMS 5415 c56 m24 y11 k34

RCCSA34 Reflect Certus Scan Abutment Anterior 3.4 mm



RCCSP34 Reflect Certus Scan Abutment Posterior 3.4 mm


Scan Abutments


RCLSA34 Reflect Certus Lab Scan Abutment (3-pack) 3.4 mm



RCBVE34 Reflect Certus Temporary CylinderEngaging 3.4 mm



Temporary Abutments

RCBVN34 Reflect Certus Temporary CylinderNon-Engaging 3.4 mm

RCBVN41Reflect Certus Temporary CylinderNon-Engaging 4.1 mm

RCBVN50 Reflect Certus Temporary CylinderNon-Engaging 5.0 mm

Screw Included

Screw Included


Refle

ct

CE

RT

US

IMP

LA

NT

SY

ST

EM

PMS 5415 c56 m24 y11 k34


RCPUC34 Reflect Certus UCLA Plastic Abutment 3.4 mm, Engaging



RC4534 Reflect Certus Ti Abutment3.4 mm x 4.5 mmH

RC6034 Reflect Certus Ti Abutment3.4 mm x 6 mmH

RC6041 Reflect Certus Ti Abutment 4.1 mm x 4.5 mmH

RC4541 Reflect Certus Ti Abutment 4.1 mm x 6 mmH

RC4550 Reflect Certus Ti Abutment 5.0 mm x 4.5 mmH


Ti Abutments

RCPUN34 Reflect Certus UCLA Plastic Abutment3.4 mm, Non-Engaging



RC6050 Reflect Certus Ti Abutment 5.0 mm x 6 mmH

RCN4534 Reflect Certus Ti Abutment 4.5 mmHNon-Engaging 3.4 mm



Screw Included

Screw Included



PMS 5415 c56 m24 y11 k34

RCTA34 Reflect Certus Ti Blank3.4 mm

RCTA41 Reflect Certus Ti Blank 4.1 mm


RCEA1534 Reflect Certus 15° Ti Esthetic Abutment, Anterior 3.4 mm x 3 H

RCEA1541 Reflect Certus 15° Ti Esthetic Abutment, Anterior 4.1 mm x 3 H

RCEA1550 Reflect Certus 15° Ti Esthetic Abutment, Anterior 5.0 mm x 3H

RCEA34 Reflect Certus Ti Esthetic Abutment, Anterior 3.4 mm x 3 H



RCEP1541 Reflect Certus 15° Ti Esthetic Abutment, Posterior4.1 mm x1 H

RCEP1550 Reflect Certus 15° Ti Esthetic Abutment, Posterior 5.0 mm x 0.5 H

RCEP41 Reflect Certus Ti Esthetic Abutment, Posterior 4.1 mm x 1 H

RCEP50 Reflect Certus Ti Esthetic Abutment, Posterior 5.0 mm x 0.5 H

Ti Esthetic Abutments

Ti Blanks

Ti Screws

RCTS00 Reflect Certus Ti Screw 3.4/4.1/5.0/6.0 mm

Screw Included

Screw Included


Refle

ct

CE

RT

US

IMP

LA

NT

SY

ST

EM

PMS 5415 c56 m24 y11 k34


RCMU134 Reflect Certus MUA 1 mmH 3.4 mm, Non-engaging

RCMU141 Reflect Certus MUA 1 mmH 4.1 mm, Non-Engaging










RCM17234 Reflect Certus 17° MUA 2 mmH 3.4 mm, Engaging








RCMUPS Reflect Certus MUA Screw .048” Hex

RCMUTS Reflect Certus Angled MUA Screw






Common restorative components The Reflect Multi-Unit Abutment System has common restorative components across all Reflect Implant Systems . The components below can be used with all Reflect Implant Multi-Unit abutments . No matter if there are different Reflect implants in an arch, the Reflect Multi-Unit Abutment System universalizes the restorative platform . The Reflect Multi-Unit abutments come packaged with the abutment screw that matches the system screw . The prosthetic screw is not included and needs to be ordered separately . The Reflect Multi-Unit Scan abutment, Ti Temporary Abutment and Multi-Unit Healing cap require .050 hex driver .

Reflect™

Multi-Unit A B U T M E N T S Y S T E M


Reflect™ Multi-Unit A B U T M E N T S Y S T E M

RMUAA Reflect Multi-Unit Abutment Analog

RMUGP50 Reflect Multi-Unit Guide Pin .050” Hex

RMUICC Reflect Multi-Unit Impression Coping, Closed-Tray

RMUICO Reflect Multi-Unit Impression Coping, Open-Tray

RMUPS50 Reflect Multi-Unit Prosthetic Screw .050” Hex

RMUSA Reflect Multi-Unit Scan Abutment

RMUTT Reflect Multi-Unit Titanium Temporary

RMUHC Reflect Multi-Unit Temporary Healing Cap

RMUAD Reflect Multi-Unit Abutment Driver


Reflect Tapered Screw Surgical Kit

Item No. Description

DT094 Reflect Tapered Step Drill 2.3/2.0





DTPDT Reflect Pilot Drill

DT100 Reflect Tapered Drill Ext. with Internal Irrig

DT101 Ratchet Wrench with Square Head

DT102 Direction Indicator 1.8/2.3

RTLDL Reflect Tapered Latch .050 Driver Long

RTLDS Reflect Tapered Latch .050 Driver Short

RTSCL Reflect Tapered Square .050 Connector Long

RTSCS Reflect Tapered Square .050 Connector Short


HCRTNPL Handpiece Connector

HCRTNPS Handpiece Connector

HCRTRPL Handpiece Connector

RCRTNPL Ratchet Connector

RCRTNPS Ratchet Connector

HCRTRPS Handpiece Connector

RCRTRPL Ratchet Connector

RCRTRPS Ratchet Connector

MDE150 Drill Extension

TTAR100 Torque Wrench Adapter

MGD100L Lance Drill

TEEL200M Linderman Drill

DTPDT Reflect Pilot Drill



DT006 Rapid Step Drill Ø2.0mm

DT007 Rapid Step Drill Ø2.4/2.8mm






RALDL Reflect Rapid Latch Driver Long

RALDS Reflect Rapid Latch Driver Short

RASCS Reflect Rapid Square Connector Omnigrip Short

RASCL Reflect Rapid Square Connector Omnigrip Long





HCRRNPL Handpiece Connector

RCRRRPS Ratchet Connector

HCRRNPS Handpiece Connector

RCRRNPL Ratchet Connector

RCRRNPS Ratchet Connector

HCRRRPL Handpiece Connector

HCRRRPS Handpiece Connector

MGD100L Lance Drill

TEEL200M Linderman Drill

DT102 Direction Indicator 1.8/2.3

RCRRRPL Ratchet Connector

Reflect Rapid Surgical Kit


Reflect Aspire Surgical Kit



RSPP20 Reflect Aspire Parallel Pin 2.0/2.7

RSPP28 Reflect Aspire Parallel Pin 3.2/3.7

RSLD17 Reflect Aspire Lance Drill 1.7

RSHCL Reflect Aspire Handpiece Connector Long

RSHCS Reflect Aspire Handpiece Connector Short

RSHCL4 Reflect Aspire Handpiece Connector Long 4.5/5.0

RSHCS4 Reflect Aspire Handpiece Connector Short 4.5/5.0

RSTD20 Reflect Aspire Twist Drill Ø 2.0, 8-13






RSCD27 Reflect Aspire Corticle Drill Ø 2.7/3.0







RSRCL Reflect Aspire Ratchet Connector Long

RSRCS Reflect Aspire Ratchet Connector Short


RTLDL Reflect Tapered Latch .050 Driver Long

RTLDS Reflect Tapered Latch .050 Driver Short

RTSCL Reflect Tapered Square .050 Connector Long

RTSCS Reflect Tapered Square .050 Connector Short

RSRCL4 Reflect Aspire Ratchet Connector Long 4.5/5.0

RSRCS4 Reflect Aspire Ratchet Connector Short 4.5/5.0

MDG200 Depth Gauge


Reflect Certus Surgical Kit




MGD100L Lance Drill

RCDP004 Reflect Certus Pilot Drill 2.0

RCDP005 Reflect Certus 3.2-8.5 Drill

RCDP006 Reflect Certus Twist Drill Ø3.2-11

RCDP007 Reflect Certus Twist Drill Ø4.0-8.5


RCDP009 Reflect Certus Twist Drill Ø5.0-8.5


RCDP011 Reflect Certus Countersink

RCDT077 Reflect Certus Countersink Drill 3.4



RCDT074 Reflect Certus Bone Tap Ø 3.4




RCHCL Reflect Certus Handpiece Connector Long 3.4/4.1

RCHCS Reflect Certus Handpiece Connector Short 3.4/4.1

RCDP020 Reflect Certus Ratchet Connector Long 3.4/4.1

RCDP021 Reflect Certus Ratchet Connector Short 3.4/4.1

RCDP022 Reflect Certus Handpiece Connector Long 5.0

RCDP023 Reflect Certus Handpiece Connector Short 5.0

RCDP024 Reflect Certus Ratchet Connector Long 5.0

RCDP025 Reflect Certus Ratchet Connector Short 5.0

RCHPDL Reflect Certus Handpiece Connector Long

RCHPDS Reflect Certus Handpiece Connector Short

RCHDL Reflect Certus Hand Driver Long

RCHDS Reflect Certus Hand Driver Short


MDG200 Depth Gauge



RCRRNPL Reflect Rapid Ratchet Connector Narrow Plat Long

RCRRNPS Reflect Rapid Ratchet Connector Narrow Short

HCRRRPL Reflect Rapid Handpiece Connector Reg Long

HCRRRPS Reflect Rapid Handpiece Connector Reg Short

RCRRRPL Reflect Rapid Ratchet Connector Reg Long

RRCT049 Reflect Recover Cortical Drill 3.5



RRBT052 Reflect Recover Bone Tap 3.5



MDG200 Depth Gauge

RRPP20 Reflect Recover Parallel Pin 2.0/2.4

RRPP28 Reflect Recover Parallel Pin 2.8/3.2

Reflect Recover Surgical Kit


ids guarantees that if any Reflect product fails as a result of a defect of the material strength and stability during the lifetime of the patient, ids will replace the product with the same or equivalent product as long as the following guidelines are followed:

• A complete Return Merchandise Authorization Form is submitted no later than 30 days after the product issue arises .

• Product is returned in sterilized condition, if appropriate or as indicated in the instructions for use .

• Compliance with and application of product instructions valid at the time of treatment, as well as recognized dental procedures, during and after the treatment .

• Good oral hygiene of the patient as monitored by the user .

• Failure was not due to damage resulting from an accident, a trauma or other damage caused by the patient or a third party .

ids manufacturing design, tolerances and quality control exceed all international quality standards . We build them better, so we back them better and make it easy for you .

Simple No Nonsense Lifetime Warranty

Tapered Screw Vent is a registered trademark of Zimmer Dental Inc. NobelActive and Nobel Replace Select CC are registered trademarks of Nobel Biocare Inc. Tapered Certain is a registered trademark of Biomet 3i.OsseoSpeed is a registered trademark of AstraTech.


Unique Technology The LiteTouch is the only laser in the world with patented laser-in-handpiece (L-I-H™) technology . This unique delivery system eliminates fragile fiber optic lines and large articulating arms . The lightweight ergonomic handpiece provides accurate and easy access to all intraoral areas .

Exclusive In-Office TrainingYou’ll be confident using LiteTouch from day one thanks to our exclusive in-office training and education for you and your entire team . Our dedicated laser specialists are there on an ongoing basis with support that ensures you fully integrate the LiteTouch throughout your practice .

Your Patients Will Love LiteTouchLiteTouch is far less invasive than traditional dentistry, eliminates the sound of the handpiece, and in most cases the need for injections . Patients have less discomfort, shorter chair time, and faster healing, resulting in a better patient experience .

The Most Compact All-Tissue Laser in the World Its size and portability allows LiteTouch to be easily used in every dental operatory .

Proven Performance Light Instruments is the world’s leading provider of next generation dental laser technologies . LiteTouch is the most used all-tissue laser in the world .

Wide Assortment of TipsLiteTouch offers a wide variety of tips . There are numerous sizes available for every procedure and application . Visit lightinstruments .com for a complete listing of tips .

More for You, More for Your PatientsOur exclusive training, improved production, and a better patient experience will result in more patients saying yes . The fully loaded LiteTouch laser is available from your dental dealer up to 50% less than other all-tissue lasers .

At a glance, the LiteTouch™ All-Tissue Laser is similar to your dental handpiece in size

and weight, but this game-changing Laser-in-Handpiece (L-I-H™) technology allows

you to treat more patients, more efficiently than ever before. Most LiteTouch procedures

do not require injections, so patients will be free of the pain and anxiety associated with

traditional dentistry. Thanks to a better patient experience, you will see greatly improved

case acceptance with your new and existing patients.

Why is the LiteTouch All-Tissue Laser a better alternative to traditional instrumentation?

A better way of performing everyday dentistry...every day.


14.56” 18.50” 18.50”

17.91”

31.10” 25.19”

User-friendly, touch-screen LCD display

Compact footprint

360˚ swivel

120°

120˚ rotation

Unlike other all-tissue lasers, the LiteTouch (L-I-HTM) handpiece houses all critical laser components.

THE ALL-TISSUE LASER


I M P L A N T C E M E N T

CemPlant is designed for permanent and long-term provisional cementation of implant abutment retained crowns or bridges . Its controlled expansion formulation protects with a shock-absorbing final set that minimizes excess force transfer to the implant . The material’s unique chemistry provides strong retention and seal, yet allows for easy removal for inspection . The result is a more comfortable experience for the patient during a critical stage in treatment .

Physical and mechanical propertiesCemPlant is a luting cement ideal for applications where the bond between restoration and abutment is based on mechanical retention . Therefore, the controlled slight expansion ensures a safe fixation of the restoration with an optimum seal and marginal fit .

Features

• Eugenol free

• Dual cure

• Antibacterial Zinc formula

• Radiopaque

• Controlled expansion setting provides excellent seal and retention

• Long 2:00 minute working time

Benefits

• Gel setting stage peels off in one piece for easy clean-up around margins reducing the risk for peri-implantitis

• Shock-absorbing set characteristic minimizes excess force transfer to implant

• Strong retention yet easy to remove for inspection

• Greater comfort for the patient

• Easy to use

REF CP400

CemPlant Implant Cement - 1x5ml Automix Syringe, 10 Mixing Tips

The best way to treat and prevent peri-implantitis.The AirClean glycine formulation is the most effective way to treat and prevent biofilm related infections like peri-implantitis; a leading cause of implant failure . The AirClean adapter easily attaches to the existing handpiece line and delivers 30-micron glycine unit-dose powder evenly and accurately . The clinically proven glycine powder is powerful on biofilm yet safe for all implant surfaces, and ideal for use with all implant patients .

• Easily removes biofilm resulting in a healthier peri-implant environment

• Ideal for use as a preventative treatment for all implant patients

• Safe on tissue, titanium implant surfaces, and restorations

• Unit dose design provides precise delivery in hard to reach places

• Easily connects to existing handpiece line


SmartD E N T I N G R I N D E R ™

Before implant placement. Ready for implants 10 weeks after extraction and grafting.

12 weeks after implant placement.

The Smart Dentin GrinderTM turns extracted teeth into the highest quality and most cost-effective autogenous graft.

With the revolutionary Smart Dentin Grinder from ids, you can now use extracted teeth as autogenous bone graft . Human dentin is the “gold standard” for grafting because it has the same properties as bone .* Dentin bone graft also contains growth factors, stem cells, is mineralized and osseoinductive . Additionally, the use of dentin graft eliminates the need for a secondary surgical site . And, since the graft is made from the patient’s own teeth, there is no risk of disease transmission .

Extract Grind Graft

*Binderman et al., Journal of Interdisciplinary Medicine and Dental Science 2014, 2.6

REF CP400

CemPlant Implant Cement - 1x5ml Automix Syringe, 10 Mixing Tips

idsimplants.com 145 Cedar Lane, Englewood, NJ 07631 866-277-5662 • 201-676-2456

CONTINUING EDUCATION TO ENHANCE YOUR SKILLS AND PRACTICE

REF102519, R0

ids prides itself on being a valuable education resource, offering a high level of implant education in a clear and concise manner to clinicians at every skill level. This is provided through our education resource Advanced Implant Education. Their programs are uniquely designed for clinicians looking to enhance their implant knowledge and expertise. Our nationally and internationally recognized educators instruct on a wide array of courses encompassing didactic, hands-on, and live surgery.

To see available courses please visit idsimplants.com/education.

SUPPORTING SYSTEMS AND PRODUCTS - ids Implants LLC...IMPLANT SYSTEMS idsimplants.com 866-277-5662 3...

Documents

Transcript of SUPPORTING SYSTEMS AND PRODUCTS - ids Implants LLC...IMPLANT SYSTEMS idsimplants.com 866-277-5662 3...