Support Handbook - LDA Audio Techsupport.lda-audiotech.com/sites/default/files/genericos/...' g"C43...

4
Support Handbook How to cut the capacitors in ONE500.

Transcript of Support Handbook - LDA Audio Techsupport.lda-audiotech.com/sites/default/files/genericos/...' g"C43...

  • Support HandbookHow to cut the capacitors in ONE500.

  • How to cut the capacitors in ONE500Support Handbook

    1 HOW TO CUT THE CAPACITORS.

    Step by Step.

    1. Make sure that ONE is disconnected from external current.

    2. Remove the cover and check the power switches “main” and “battery”, the both mustbe in “OFF”.

    3. Remove the power cables from the suply board, the order to conect it again isPOSITIVE, NEGATIVE (External suply) NEGATIVE, POSITIVE (BATTERY) from left to rigth.

    LDA Audio Tech - Severo Ochoa Nº 31- 29590 MÁLAGA, ESPAÑA. Tlf: +34 952028805

  • How to cut the capacitors in ONE500Support Handbook

    4. Wait 2 minutes for capacitors download.

    5. Unscrew and remove the metal cover that protects the power suply board.

    LDA Audio Tech - Severo Ochoa Nº 31- 29590 MÁLAGA, ESPAÑA. Tlf: +34 952028805

    Ilustración 1: Titled pictureexample

  • How to cut the capacitors in ONE500Support Handbook

    6. Carefully cut the ceramic part of the capacitors C-113 and C-114.

    7. Please, clean the remains of the operation.

    8. Please, replace the metal cover, connect the stwitches “main” and “battery” in “ON”mode, put on the surface cover and finally, conect ONE to the external current.

    For more information, please, contact with our Support Department at:

    [email protected]

    LDA Audio Tech - Severo Ochoa Nº 31- 29590 MÁLAGA, ESPAÑA. Tlf: +34 952028805

    mailto:[email protected]

    1 HOW TO CUT THE CAPACITORS.