Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced...
Transcript of Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced...
![Page 1: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/1.jpg)
Suorakerrostuksenmateriaalit
J. TuominenTampere University of TechnologyLaboratory of Materials Science
Laser Application Laboratory
![Page 2: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/2.jpg)
Outline• Directed energy deposition (DED) (definition)• DED methods• Feedstock types:
o Powdero Wireo Strip
• Type of metal alloys:o Propertieso Applications
• Summary
15.2.20173D Boosti ja Invest 2
![Page 3: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/3.jpg)
Directed energy deposition (DED)
15.2.20173D Boosti ja Invest 3
• ISO/ASTM 52900:2016 ”Additive manufac-turing – General principles – Terminology”oDED is AM process in which focused thermal
energy (laser, EB, plasma-arc) is used to fusematerials by melting as they are beingdeposited
o The build surface can be an existing part ontowhich material is added (repairing)
![Page 4: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/4.jpg)
Overview of AM processingprinciples for metallic materials
15.2.20173D Boosti ja Invest 4
ISO/ASTM 52900:2016 ”Additive manufacturing – General principles – Terminology”
Directed energydeposition
Powder bed fusion
![Page 5: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/5.jpg)
Directed energy deposition
15.2.20173D Boosti ja Invest 5
• ASTM F3187-16 ”Standard Guide for DirectedEnergy Deposition of Metals”o Applications, DED system set-up, machine operation,
documentation, work practices, system and processmonitoring
![Page 6: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/6.jpg)
DED methods
15.2.20173D Boosti ja Invest 6
Laser: coax-powder Laser: coax-wire (cold, hot),off-axis wire (cold, hot)
MIG/MAG, MIG/MAG pulsed,CMT
EB: coax-wire (xBeam)EB: off-axis wire (Sciaky)
TIG cold-, hot-wire Plasma-arc (powder, wire)
Others:• Additive friction stir welding• Strip cladding (SAW, ESW, laser)• Cold spraying
![Page 7: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/7.jpg)
Standards related to DED feedstock
15.2.20173D Boosti ja Invest 7
• ASTM F3049-14 Standard Guide for Characterizing Pro-perties of Metal Powders Used for Additive Manufac-turing Processes
• AWS: Specification for Filler Metal Standard Sizes,Packaking, and Physical Attributes
• AWS: Welding Consumables – Wire Electrodes, Wiresand Rods for Welding of Aluminum and Aluminum-Alloys
• AWS: Specification for Nickel and Nickel-Alloy BareWelding Electrodes and Rods
• AWS: Specification for Copper and Copper-Alloy BareWelding Rods and Electrodes
• AWS: Specification for Titanium and Titanium-AlloyWelding Electrodes and Rods
• Etc.
![Page 8: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/8.jpg)
Powders
15.2.20173D Boosti ja Invest 8
1. Sulatus2. Puhallus/atomisointi3. Jähmettyminen
• Produced by atomization:o Gases (Ar, He, N2) (spherical)o Plasma (spherical, smooth, high purity,
for reactive metals))o Water (irregular)o Centrifugal (spherical, smooth, for reactive metals)
• Production methods affect:o Shape (flowability, absorption)o Surface texture (moisture?)o Porosity (mechanical properties)o ’satellites’ (flowability)o Size (resolution, surface finish, flowability, efficiency)o Purity (S, P, O) (defects, inclusions, mechanical properties)
o Gas atomized PTA grade typically used (50-150µm)
![Page 9: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/9.jpg)
Wires
15.2.20173D Boosti ja Invest 9
Guest 2014, Canada
Seamless by electrical resistance welding =sähkövastushitsaus,Umpiputkimainen täytelankaPäittäisliitetty täytelankaLimiliitetty täytelanka
• Solid wires (soft & ductile by drawing) (Ø0.8-3.2mm)– Low alloy grades often Cu coated
• Tubular wires (täytelanka) (Ø>1.2mm)– Metal sheath:
• Lubricant coated (graphite, MoS2)
– Internal powders:• Alloying elements (metals, carbides etc.)• Arc stabilizers• Fluxing agents• Slag formers• Shielding gas producers
1. Nauha2. Muotoilurullat (U-muoto)3. Jauhetäyte4. Sulkeminen
![Page 10: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/10.jpg)
Strips
15.2.20173D Boosti ja Invest 10
• Strips for SAW & ESW (w=15–120 mm, t=0.5mm)o Solid (rolling)o Sintered (from powders, Stellites for instance)o Flux-cored
• Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm)o Produced by rolling round wires or cutting from wider bandso To increase deposition rates, better surface qualityo Less penetrationo G3Si1, AlMg4.5Mn, AlSi5
Fronius International GmbH
![Page 11: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/11.jpg)
Materiaalit
15.2.20173D Boosti ja Invest 11
• Low alloy steels (G3Si1,4130, 4140, 300M)• Tool steels (P20, M4, H13, CPM 10V, X42Cr13)• Hadfield-steels (12-19%Mn, 1.1-1.4%C, 0-2.5%Cr)• Maraging steels (low C ultra high strength)• Invar steels (FeNi36)• Stainless steels (316L, 254SMO, 2205, 431, 17-4 PH)• Hardfacing alloys (Stellites, Norem, Nanosteel, Self-fluxing alloys)• Superalloys (Inconel, Hastelloy, Monel, CMSX-4, high-Cr NiCr)• Titanium alloys (Ti-6Al-4V, Ti6242, Ti grade 2)• Copper alloys (CuAl, CuNi, CuSn)• Aluminium alloys (AlSi5 (4043), AlSi10Mg, AlSi12, AlSi7Mg)• Magnesium alloys• Refractory metals (W, Mo, Ta)• MMCs (WC/W2C-NiBSi, VC-tool steel, SiC-Al, synthetic diamonds)• Solid lubricants (MoS2, WS2, CaF2, graphite)• Intermetallics (Cr13Ni5Si2, MoSi2, FeAl, , TiAl, NiTi)• Gradient layers (FGM) (metal matrix composites, monolithes)• High entropy alloys (development of new alloys)
![Page 12: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/12.jpg)
Low alloy steels
15.2.20173D Boosti ja Invest 12
Laser-DED powder: Hybrid (additive + subtractive)manufactured hinge (sarana, nivel) part from 4140
steel (Liou et al. 2007, USA)
Arc-DED wire: Crane hook (RAMLAB,Netherlands), ASTM A391, A973?
11mm
Arc-DED wire: Canal bridge (MX3D, Netherlands) Arc-DED wire: Cantilever beam, ulokepalkki (CranfieldUniversity, UK), topology optimized, 7m, 1500kg
![Page 13: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/13.jpg)
15.2.20173D Boosti ja Invest 13
Arc-DED wire: Mold manufacturing, hybrid (additive + subtractive, ER70S-6 (Akulaet al. 2006, India)
11mm
Hybrid manufactured(additive + subtractive) mildsteel 70S-6 (Song et al.2005, South Korea)
S355: Rm 510-680MPa
Arc-DED wire: 300M UHSS(Skiba et al. 2010)
Low alloy steels
![Page 14: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/14.jpg)
Tool steels
15.2.20173D Boosti ja Invest 14
Laser-DED powder: Graded build-up of laser clad gear teeth (Laser Cladding Venture, NV,Belgium)Wear resistant surface, tough core
• Strength• Fatigue• Wear• Cost
Hot-work tool steel
![Page 15: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/15.jpg)
Tool steels
15.2.20173D Boosti ja Invest 15
Laser-DED powder: Hybrid (additive + subtractive) manufactured bearing seat(laakerin istukka) part from H13 tool steel (Nagel et al. 2010, USA)
EB-DED wire: Build-up and repair oftooling & stamping dies (Sciaky Inc.,
USA)
11mm
Arc-DED wire: Austeniticmartensitic VC tool steel(~850HV1), crack-free (TUT)
Laser-DED powder: CPM 9V (Xue et al.2013, Canada)
Laser-DED powder: CPM 9V cuttingpatterns on rotary cutting die (Xue et
al. 2013, Canada)
![Page 16: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/16.jpg)
Tool steels
15.2.20173D Boosti ja Invest 16
Laser-DED powder: Conformal cooling channels incooling fan mold of H13 (InssTek, South Korea)Complex internal structures
(Griffith 2000)
(kiloponds per square inch = kilopaunaa per neliötuuma)
![Page 17: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/17.jpg)
Maraging steel
15.2.20173D Boosti ja Invest 17
Laser-DED wire: Maraging250 steel test block on
H13
Laser-DED wire: Die casting(painevalu) tool repaired
with Maraging 250
Kottman et al. JOM 67(3) 2015Pangsrivinij, M.Sc. Thesis 2016
![Page 18: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/18.jpg)
Stainless steels
15.2.20173D Boosti ja Invest 18
Laser-DED powder: AISI 431(Smurov 2007, France)
Laser-DED powder: Hybrid, turbiinin pesä,(DMG Mori)
Arc-DED wire: stainless steel (MX3D,Netherlands)
Arc-DED wire: Pelton runnersfor hydropower stations(Andritz Hydro, Switzerland)
![Page 19: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/19.jpg)
Stainless steels
15.2.20173D Boosti ja Invest 19
AISI 308L with GMAW-P (Uziel 2016)
Arc-DED wire: AISI 308L demonstrator part, 85% reduction inmaterial compared with machining (Uziel 2016)
![Page 20: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/20.jpg)
Stainless steels
15.2.20173D Boosti ja Invest 20
Laser-DED powder: elektroniikan kotelo/vaippa
![Page 21: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/21.jpg)
Stainless steels
15.2.20173D Boosti ja Invest 21
Arc-DED wire: Adding features to pressurevessels (Nuclear AMRC, UK)
Arc-DED wire: AISI 304 with CMT (Kapustka 2015,USA)
Arc-DED wire: Blade withCMT, duplex SS 2209(Posch, Fronius Int.GmbH)Instead of casting30 – 60 FNMechanical properities of 2209 (Posch,
Fronius Int. GmbH, AUT)
![Page 22: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/22.jpg)
15.2.20173D Boosti ja Invest 22
Lähde: IMTI National Research Council Canada
§ Complex thermal history (directional heat extraction, repeated melting & rapid solidification, repeated solidstate transformations)§ Reduced grain size due to high solidification rates§ Directionally solidified structures§ Anisotropic mechanical properties
Lähde: IMTI National Research Council Canada
Stainless steels
![Page 23: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/23.jpg)
Stainless steels
15.2.20173D Boosti ja Invest 23
Laser-DED powder: (Rombouts et al. 2012, Belgium)
Lying
Standing
![Page 24: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/24.jpg)
Ni-based superalloys
15.2.20173D Boosti ja Invest 24
Laser-DED powder: Combustion chamberpart (engine casing) IN-718 (TWI Ltd, UK)
Ø300mm, H100mm, t0.8mm2-3 months -> 6 hours
Laser-DED powder: Oil & gas flange In625(TWI Ltd, UK)
![Page 25: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/25.jpg)
Ni-based superalloys
15.2.20173D Boosti ja Invest 25
Arc-DED wire: IN718 (Baufeld 2012)
Arc-DED wire: IN718 (Fronius USA)
![Page 26: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/26.jpg)
Ni-based superalloys
15.2.20173D Boosti ja Invest 26
Laser-DED powder: SIFCO, Ireland
Airfoil (siipiprofiili)
Inconel 625
NRC-CNRC
Laser-DED powder
Laser-DED powder: IN-718 impeller (Xue et al.,2011, Canada)
Laser-DED powder: IN625 mold with coolingchannels (Xue et al., 2011, Canada)
Laser-DED powder: IN-718 honey comb tube(Xue et al., 2011, Canada)
![Page 27: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/27.jpg)
Ni-based superalloys
15.2.20173D Boosti ja Invest 27
Inconel 625 (Rombouts et al. 2012)
![Page 28: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/28.jpg)
15.2.20173D Boosti ja Invest 28
Lähde: IMTI National Research Council Canada
Microstructure of In625
Ni-based superalloys
![Page 29: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/29.jpg)
Ni-based superalloys
15.2.20173D Boosti ja Invest 29
Numerical analysis of residual stresses in IN718 on IN718 (Mukherjee et al. 2017)
![Page 30: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/30.jpg)
Co-based alloys
15.2.20173D Boosti ja Investi 30
In-situ repair of turbine blades with Stellite 6 (TWI Ltd) Micro-cladding of Stellite (de Val et al. 2014, Spain)
Stellite 21 on AM355 mart. SSAbrasion resistance needed
![Page 31: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/31.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 31
Laser-DED powder: Hip implant (LENS,Optomec) Laser-DED powder:
Femoral component
Manufactured by DMDmethod
Laser-DED powder: (Fraunhofer IWS,Germany)
![Page 32: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/32.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 32
• Laser-DED powder manufacturedand post-machined airliner part
• Ti-6Al-4V
• Length approx. 600 mm
• Improves ’buy-to-fly’ ratio
• Airbus, for instance, spends £250million for conventionallymanufactured Ti componentsevery year -> huge savingpotential
Buy-to-fly ratio = the ratio of the amount of materialpurchased to the amount of material found in thefinal component (lower the better)
Large stair-stepping effect
Aeromet Corp.
![Page 33: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/33.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 33
A large 3D printed titanium part for J-20 or J-31 stealth fighter (China)
A 5 m long Ti central wing spar (siipisalko) forComac C-919 passenger plane (NPU, China)
Large titanium part for mainstructural component in aircraft,1730x250x230mm (Beihang,China)
![Page 34: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/34.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 34
Laser-DED powder: Fatigue strength of Ti-6Al-4V (Prabhu et al. 2015)Presence of unmelted particles affects fatigue lifeRepair condition means that deposited parts are joined to wrought part
Laser-DED powder: Bell helicopterExhaust duct Ti-6Al- 4V (LENS)
EB-DED: Ti6Al4V screw (Sciaky Inc.,USA)
EB-DED wire:Rear upper spars
for Airbus wing(Sciaky Inc.)
![Page 35: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/35.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 35
![Page 36: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/36.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 36
Ti-6Al-4V
Laser-DED wire:Kottman et al. JOM 67(3) 2015Pangsrivinij, M.Sc. Thesis 2016
Laser-DED wire: University West,Sweden
Laser-DED powder: Suspension mountingbracket, jousen kiinnitysteline Red Bull F1,Ti-6Al- 4V (LENS)-92% Material loss
Laser-DED powder: vetoakselin osa,LENS Laser-DED powder:Valves for racing motorcycle, Ti-6Al- 4V
(LENS)
![Page 37: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/37.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 37
Ard-DED wire: Ti6Al4V flap rib = siiventukikaari (Cranfield University)
Weight as design 1.43kgBillet weight 53kg
Weight as deposited with plate 9kg
Arc-DED wire: Ti alloy landing gear rib =laskutelineen runko (Cranfield University)
Weight as design 21kgBillet weight 240kg
Weight as deposited 24kg
![Page 38: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/38.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 38
’Eliminating 50-75% of thecosts when fabricating titaniumcomponents with arc-DED’
’1000 titanium parts in Boeing787 that can be printed’
’200-lb. needed for 20-lb. partby subtractive manufacturing,30-lb. needed by AM’
Norsk Titanium AS, plasma-arc
Ti6Al4V control arm demonstrator, hot-wire TIG,(EWI, Uziel 2016)
EB-DED wire: Ballast tank forsubmarine =
painelastivesisäiliö (SciakyInc.)
![Page 39: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/39.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 39
Arc-DED wire: Ti6Al4V tensile & fatiguestrength (Cranfield University)
![Page 40: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/40.jpg)
Ti alloys
15.2.20173D Boosti ja Invest 40
Arc-DED wire: Ti6Al4V, high-pressure cold-rolling (Cranfield University)Isotropic mechanical properties + diminished residual stresses
![Page 41: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/41.jpg)
Al alloys
15.2.20173D Boosti ja Invest 41
Arc-DED wire: Stiffened Al panels(Cranfield University) Arc-DED wire: Wing rib = siipikaari
(Cranfield University)
150 layers 40 mm3/s
Hypoeutectic AlSi5(4043) by robot-guidedCMT process, 50 HV0.05
Ra 3.0µmArc-DED wire: tukiseinä/laipio (Cranfield
University)
![Page 42: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/42.jpg)
Al alloys
15.2.20173D Boosti ja Invest 42
Arc-DED wire: Tensile performances of Al alloys (Martina 2015,Cranfield University)
Porosity problemin Al alloys
Rolling helps toremove porosity
![Page 43: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/43.jpg)
Cu alloys
15.2.20173D Boost ja Invest 43
Arc-DED wire: Brass (Posch, Fronius Int.GmbH, Austria)
Arc-DED wire: Brass sculpture (MX3D, Netherlands)
Laser-DED powder: Drawing die (vetomatriisi) with cooling channels,CuAl10Fe1 (aluminium bronze) (Freisse et al., 2015, Germany)
![Page 44: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/44.jpg)
Mg alloys
15.2.20173D Boosti ja Invest 44
Laser-DED powder: Elektron™ MAP 43 Mg (T. Palmer, PennState, USA)
![Page 45: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/45.jpg)
Refractory metals
15.2.20173D Boosti ja Invest 45
Arc-DED wire: (Williams 2016, Cranfield Unversity, UK)
![Page 46: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/46.jpg)
Intermetallics
15.2.20173D Boosti ja Invest 46
Laser-DED powder. TiAl (Fraunhofer ILT,Germany)
Laser-DED powder:TiAl (Fraunhofer IWS,Germany)
![Page 47: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/47.jpg)
Multi-material
15.2.20173D Boosti ja Invest 47
Laser-DED powder: Nickel/Copper, hybrid (additive +subtractive) (Kerschbaumer et al., 2004)
Arc-DED wire: Steel/Bronze (CuSi3)(Cranfield University)
![Page 48: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/48.jpg)
Multi-material
15.2.20173D Boosti ja Invest 48
Laser-DED powder
![Page 49: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/49.jpg)
FGM
15.2.20173D Boosti ja Invest 49
Laser-DED powder: Graded stainless steel 316L / Stellite 6 (Smurov 2007)
Laser-DED powder: In690/TiC FGM (Wilson et al., 2012)Laser-DED powder: NiBSi/WC,NiBSi/CrC FGM, cutting-edge of circularknife (Theiler et al., BIAS Bremen)
![Page 50: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/50.jpg)
FGM
15.2.20173D Boosti ja Invest 50
Laser-DED powder: Graded structure (Smurov 2007)
Laser-DED powder: 304L/Invar (Hofmann et al., 2014)
![Page 51: Suorakerrostuksen materiaalit...o Flux-cored • Strip-wires (w=4.0-4.5mm, t=0.5-0.6mm) o Produced by rolling round wires or cutting from wider bands o To increase deposition rates,](https://reader035.fdocuments.net/reader035/viewer/2022071405/60fa46adec19b3633845d170/html5/thumbnails/51.jpg)
Yhteenveto• Suorakerrostuksessa lähtöaineet voivat olla jauheen lisäksi
myös lankoja ja nauhoja• Useita materiaalivaihtoehtoja: teräkset, Ni-pohjaiset super-seokset, alumiini, titaani jne.• Myös monimateriaalit, gradienttirakenteet, metallimatriisi-
komposiitit• Hauraat ja kovat materiaalit haasteellisimpia• Kiderakenteet suuntautuneesti jähmettyneitä -> anisotroop-
piset mekaaniset ominaisuudet• Mekaaniset ominaisuudet heikkenee, jos
prosessiparametreistä tai lisäaineen laadusta johtuvia virhei-tä
15.2.20173D Boosti ja Invest 51
KIITOS!