Sunway Sunflex Catalog 1 Piece Type

CONTENTS

INDEX

SERIES DESCRIPTION PAGE

S001 BSP STRAIGHT FEMALE 30° SEAT ANGLE 3 6

S002 BSP STRAIGHT FEMALE FLAT SEAT 4

S003 SAE STRAIGHT FEMALE 45° SEAT ANGLE 5

S005 JIC STRAIGHT FEMALE 37° SEAT ANGLE 6 S006 '0' RING SEAL (ORS) FEMALE SWIVEL-STRAIGHT 7 S009 SAE 45° FLARE MALE 8 S012 BSPP MALE 9 S013 BSPP MALE FLAT FACE 10 S015 BSPT MALE 11 S016 NPT MALE 12 S018 JIC 37° FLARE MALE 13 S019 JIC BULKHEAD MALE 37° SEAT ANGLE 14 S020 UN 'O'-RING BOSS MALE 15 S023 SAE STRAIGHT FLANGE 16 S026 BSP FEMALE INVERTED CONE 30° SEAT ANGLE (ST) 17 S051 BSP 90° SWEPT ELBOW 18 S055 JIC 90° SWEPT ELBOW 37° SEAT ANGLE 19 S056 ORS FEMALE SWIVEL 90° ELBOW 20 S059 SAE 90° SWEPT ELBOW FLANGE 21 S060 BSP 45° SWEPT ELBOW 22

S062 SAE 22-1/2° SWEPT ELBOW FLANGE 23

S063 SAE 30° SWEPT ELBOW FLANGE 24

S064 JIC 45° SWEPT ELBOW 37° SEAT ANGLE 25

S066 SAE 60° SWEPT ELBOW FLANGE 26 S067 SAE 67-1/2° SWEPT ELBOW FLANGE 27

2

CONTENTS

INDEX

SERIES DESCRIPTION PAGE

S068 SAE 45° SWEPT ELBOW FLANGE 28

S094 BANJO FOR BSP BOLTS 29

S095 BANJO FOR METRIC BOLTS 30

S096 LIFESAVER 31 S097 PIPE STAND-LIGHT DUTY 32

S098 PIPE STAND-HEAVY DUTY 33

S099 PIPE STAND-FRENCH TYPE 34

S551 BSP COMPACT ELBOW 35

S555 JIC COMPACT ELBOW 36

S666 ‘ORS’ FEMALE SWIVEL 45° ELBOW 37

S801 METRIC FEMALE 60° SEAT ANGLE 38

S802 METRIC FEMALE-FLAT SEAT 39

S803 METRIC FEMALE-LIGHT DUTY 24° SEAT ANGLE 40

S804 METRIC FEMALE-HEAVY DUTY 24° SEAT ANGLE 41

S805 METRIC STRAIGHT FEMALE-FRENCH TYPE 42

S806 ‘O’-RING STRAIGHT FEMALE (DKO) HEAVY DUTY 43

S811 METRIC MALE 60° SEAT 44

S813 METRIC MALE 24° SEAT LIGHT DUTY TYPE (ST) 45

S814 METRIC MALE 24° SEAT HEAVY DUTY TYPE (ST) 46

S815 METRIC MALE-FRENCH TYPE (ST) 47

S818 JIS 30° FLARE MALE (ST) 48

S819 JIS BULKHEAD MALE 30° SEAT ANGLE (ST) 49

S851 METRIC 90° SWEPT ELBOW 60° CONE (ST) 50

S853 METRIC 90° SWEPT ELBOW-LIGHT DUTY 24° SEAT (ST) 51

S854 METRIC 90° SWEPT ELBOW-HEAVY DUTY 24° SEAT (ST) 52

S855 METRIC 90° SWEPT ELBOW-FRENCH TYPE 24° SEAT (ST) 53

S856 METRIC 90° 0-RING SWEPT ELBOW (DKO) (ST) 54

S861 METRIC 45° SWEPT ELBOW 60° SEAT (ST) 55 3

S863 METRIC 45° SWEPT ELBOW-LIGHT DUTY 24° SEAT (ST) 56 S864 METRIC 45° SWEPT ELBOW-HEAVY DUTY 24° SEAT (ST) 57 S865 METRIC 45° SWEPT ELBOW-FRENCH TYPE 24° SEAT (ST) 58 S866 METRIC 45° ‘0’ RING SWEPT ELBOW (DKO) (ST) 59 S870 JAPANESE METRIC FEMALE 30° SEAT (ST) 60 S880 METRIC MALE WITH ‘O’ RING GROOVE (ST) 61

3

SUNFLEX

ONE-PIECE FITTINGS

General Information

• The standard fittings shown in this catalogue are made from quality steel machined to close tolerances.

• We also produce special fittings and related turned parts of steel or other materials on request.

• Rainbow-zinc plating with passivation on standard fittings – other protective finishing could also be supplied on request.

• Screw threads are machined to internationally accepted standards such as:

BSP UN 1338 METRIC: ISO – 6H JIC/SAE Class 2 NPTF : ASA

Legend The legends following the part numbers indicate that: (S) Standard tail (R1 & R2) (L) Multispiral tail (V) Solid type (VS) Solid piece – standard tail (VL) Solid piece – multispiral tail Code 61 3000psi Code 62 6000psi • Thrust-Wire Nut Fittings L Long Nut or Long Leg Fittings or Long tube HD Heavy Duty Nut Fittings or Caterpillar® or 9000 series NH No hole SN Wire Braid Non Skive Hose (R1T & R2T) MS Multispiral Hose (R12) SH 4SH Hose SP 4SP Hose Box Sizes

Box 1 - 153mm(L) x 153mm(W) x 153mm(H) Box 2 - 254mm(L) x 153mm(W) x 153mm(H) Box 3 - 254mm(L) x 254mm(W) x 153mm(H)

Caterpillar® and Cat® are registered trademarks of Caterpillar Inc. All manufacturer’s names, numbers, symbols and descriptions are used for reference purposes only and do not imply that any part listed is a product of these manufacturers.

We reserve the right to alter the design, specifications, or to discontinue the production of any

items listed in this catalogue.

2

How to Order The fittings are required to match the hose to be used. EXAMPLE 1 1-1/16” JIC Straight Female To fit on ¾” Nominal Bore, Wire Braid Non Skive Hose (R1T & R2T). Part Number S005-17-12 (S)/SN EXAMPLE 2 If the hose for above is ¾” Nominal Bore, Multi-Spiral Hose (R12). Part Number S005-17-12 (L)/MS

3

Contents Page

S001 SERIES – BSP STRAIGHT FEMALE 30° SEAT ANGLE – STANDARD TAIL

HOSE BORE

THREAD DIMENSIONS mm PART

NUMBER I T A B C D E H L S001-04-04 (S)/SN S001-06-06 (S)/SN S001-08-06 (S)/SN S001-08-08 (S)/SN S001-10-08 (S)/SN S001-10-10 (S)/SN S001-12-12 (S)/SN S001-16-16 (S)/SN S001-20-16 (S)/SN S001-20-20 (S)/SN

1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1" 1-1/4"

1/4 – 19 3/8 – 19 1/2 – 14 1/2 – 14 5/8 – 14 5/8 – 14 3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11

22 24 26.5 27 31 31 31 40 59 46.5

18 19 20.5 21 24 24 25 31 47 35.5

19 22 26 26 29 29 32 38 50.8 50.8

S001 SERIES – BSP STRAIGHT FEMALE 30° SEAT ANGLE – MULTI SPIRAL TAIL

HOSE BORE THREAD DIMENSIONS mm PART

NUMBER I T A B C D E H L S001-12-12 (L)/MS S001-16-16 (L)/MS S001-20-16 (L)/MS S001-20-20 (L)/MS S001-20-20 (L)/SH S001-20-20 (L)/SP

3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

31 40 59 46.5 46.546.5

25 31 47 35.5 35.5 35.5

32 38 50.8 50.8 50.850.8

4

Contents Page

S002 SERIES – BSP STRAIGHT FEMALE FLAT SEAT

HOSE BORE


NUMBER I T A B C D E H L S002-04-04 (S)/SN S002-06-06 (S)/SN S002-08-06 (S)/SN S002-06-08 (S)/SN S002-08-08 (S)/SN S002-12-08 (S)/SN S002-12-12 (S)/SN S002-16-16 (S)/SN

1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 1"

1/4 – 19 3/8 – 19 1/2 – 14 3/8 – 19 1/2 – 14 3/4 – 14 3/4 – 14 1" – 11

22 24.5 27 24.5 27.5 33 34 37.5

16 17 17.7 17 18 22.5 22.5 24.5

19 22 26 22 26 32 32 38

5

Contents Page

S003 SERIES – SAE STRAIGHT FEMALE 45° SEAT ANGLE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S003-17-12 (L)/MS

¾"

1-1/16 – 14

37

22.5

32

S003 SERIES – SAE STRAIGHT FEMALE 45° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H L S003-07-04 (S)/SN S003-08-04 (S)/SN S003-10-06 (S)/SN S003-12-08 (S)/SN S003-14-08 (S)/SN S003-14-10 (S)/SN S003-17-12 (S)/SN

1/4" 1/4" 3/8" 1/2" 1/2" 5/8" 3/4"

7/16 – 20 1/2 – 20 5/8 – 18 3/4 – 16 7/8 – 14 7/8 – 14 1-1/16 – 14

24.5 24.5 27 31 31 31.5 37

16 16 18 21 21 22.5 22.5

16 19 22 22 26 26 32

6

Contents Page

S005 SERIES – JIC STRAIGHT FEMALE 37° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H L S005-07-04 (S)/SN S005-08-04 (S)/SN S005-09-04 (S)/SN S005-09-06 (S)/SN S005-12-06 (S)/SN S005-14-06 (S)/SN S005-12-08 (S)/SN S005-14-08 (S)/SN S005-17-08 (S)/SN S005-14-10 (S)/SN S005-17-10 (S)/SN S005-17-12 (S)/SN S005-19-12 (S)/SN S005-21-12 (S)/SN S005-21-16 (S)/SN S005-26-20 (S)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1-1/4"

7/16 – 20 1/2 – 18 9/16 – 18 9/16 – 18 3/4 – 16 7/8 – 14 3/4 – 16 7/8 – 14 1-1/16 - 12 7/8 - 14 1-1/16 - 12 1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12

24.5 24.5 25 26.5 30.5 30 31.5 30.5 35.5 31.5 36 37 37 38 38 42

16 15 16 17.5 20 20.5 21.5 21 21 22.5 21.5 22.5 23 23 24 26

16 19 19 19 22 26 22 26 32 26 32 32 35 38 38 50.8

S005 SERIES – JIC STRAIGHT FEMALE 37° SEAT ANGLE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S005-17-12 (L)/MS S005-19-12 (L)/MS S005-21-12 (L)/MS S005-21-16 (L)/MS S005-26-20 (L)/MS S005-26-20 (L)/SH S005-26-20 (L)/SP

3/4" 3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

37 37 38 38 42 42 42

22.5 23 23 24 26 26 26

32 35 38 38 50.8 50.8 50.8

7

Contents Page

S006 SERIES – ‘0’ – RING SEAL (ORS) FEMALE SWIVEL-STRAIGHT – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S006-19-12 (L)/MS S006-23-16 (L)/MS S006-27-20 (L)/MS S006-27-20 (L)/SH S006-27-20 (L)/SP S006-32-24 (L)/MS

3/4" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/2"

1-3/16 – 12 1-7/16 – 12 1-11/16 – 12 1-11/16 – 12 1-11/16 – 12 2 – 12

58 63.5 70.5 70.5 70.5 68.5

45 49

55.5 55.5 55.5

55

35 44 48 48 48 57

S006 SERIES – ‘0’ – RING SEAL (ORS) FEMALE SWIVEL-STRAIGHT – STANDARD TAIL



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

9/16 – 18 11/16 – 16 13/16 – 16 1 – 14 1-3/16 – 12 1-7/16 – 12 1-11/16 – 12

37 40.5 47 54 58 63.5 70.5

28.5 31.5

36 41.5

45 49

55.5

19 22 26 32 35 44 48

8

Contents Page

S009 SERIES – SAE 45° FLARE MALE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S009-17-12 (L)/MS

3/4"

1-1/16 – 14

42

29

S009 SERIES – SAE 45° FLARE MALE – STANDARD SPIRAL


NUMBER I T A B C D E H L S009-07-04 (S)/SN S009-08-04 (S)/SN S009-10-06 (S)/SN S009-12-08 (S)/SN S009-14-10 (S)/SN S009-17-12 (S)/SN

1/4" 1/4" 3/8" 1/2" 5/8" 3/4"

7/16 – 20 1/2 – 20 5/8 – 18 3/4 – 16 7/8 – 14 1-1/16 – 14

27.5 27.5 28.5

32 34 42

12.7

16 19 22 26 29

9

Contents Page

S012 SERIES – BSPP MALE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S012-12-12 (L)/MS S012-16-16 (L)/MS S012-20-20 (L)/MS S012-20-20 (L)/SH S012-20-20 (L)/SP

3/4" 1" 1 1/4" 1 1/4" 1 1/4"

3/4 – 14 1" – 11 1 1/4" – 11 1 1/4" – 11 1 1/4" – 11

38 43 48 48 48

32 38 48 48 48

S012 SERIES – BSPP MALE – STANDARD TAIL



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4"

1/4 – 19 3/8 – 19 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11 1 1/4" – 11

25

28.5 31 33 38 43 48

19 22 26 29 32 38 48

10

Contents Page

S013 – BSPP MALE FLAT FACE – STANDARD TAIL



1/4" 1/4" 3/8" 1/2" 5/8" 3/4" 3/4" 1" 1" 1"

1/4 – 19 3/8 – 19 3/8 – 19 1/2 – 14 3/4 – 14 3/4 – 14 1" – 11 3/4 – 14 1 – 11 1-1/4 – 11

25 25 25.5 30 34.5 36 38 38 40 42.5

19 22 22 26 35 35 38 35 38 48

S013 – BSPP MALE FLAT FACE – MULTISPIRAL TAIL

HOSE BORE


NUMBER I T A B C D E H L S013-12-12 (L)/MS S013-16-12 (L)/MS S013-12-16 (L)/MS S013-16-16 (L)/MS S013-20-16 (L)/MS

3/4" 3/4" 1" 1" 1"

3/4 – 14 1" – 11 3/4 – 14 1 – 11 1-1/4 – 11

36 38 38 40 42.5

35 38 35 38 48

11

Contents Page

S015 SERIES – BSPT MALE – STANDARD TAIL HOSE BORE


NUMBER I T A B C D E H L S015-02-04 (S)/SN S015-04-04 (S)/SN S015-04-06 (S)/SN S015-06-04 (S)/SN S015-06-06 (S)/SN S015-06-08 (S)/SN S015-08-08 (S)/SN S015-10-10 (S)/SN S015-12-12 (S)/SN S015-16-16 (S)/SN S015-20-20 (S)/SN

1/4" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1-1/4"

1/8 – 28 1/4 – 19 1/4 – 19 3/8 – 19 3/8 – 19 3/8 – 19 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11 1-1/4 – 11

24 25.5 26 28.5 28.5 28.5 34 34 36 43.5 46.5

12.5 12.5 12.5 14 14 14 15 15 17 19.5 21.5

12.7 16 16 19 19 19 22 26 29 35 44

S015 SERIES – BSPT MALE – MULTISPIRAL TAIL

HOSE BORE



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

36 43.5 46.5 46.5 46.5

17 19.5 21.5 21.5 21.5

29 35 44 44 44

12

Contents Page

S016 SERIES – NPT MALE – STANDARD TAIL


NUMBER I T A B C D E H L S016-02-04 (S)/SN S016-04-04 (S)/SN S016-06-04 (S)/SN S016-04-06 (S)/SN S016-06-06 (S)/SN S016-08-06 (S)/SN S016-06-08 (S)/SN S016-08-08 (S)/SN S016-12-12 (S)/SN S016-16-12 (S)/SN S016-16-16 (S)/SN S016-20-20 (S)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 1" 1-1/4"

1/8 – 27 1/4 – 18 3/8 – 18 1/4 – 18 3/8 – 18 1/2 – 14 3/8 – 18 1/2 – 14 3/4 – 14 1" – 11-1/2 1" – 11-1/2 1-1/4 – 11-1/2

24 25 28 26 28.5 34 28.5 34 36 41 43.5 46.5

12.5 12.5 13.5 12.5 13.5 15 13.5 15 17 19 19 21.5

12.7 16 19 16 19 22 19 22 29 35 35 44

S016 SERIES – NPT MALE – MULTISPIRAL TAIL



3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11-1/2 1" – 11-1/2 1-1/4 – 11-1/2 1-1/4 – 11-1/2 1-1/4 – 11-1/2

36 41 43.5 46.5 46.5 46.5

17 19 19 21.5 21.5 21.5

29 35 35 44 44 44

13

Contents Page

S018 SERIES – JIC 37° FLARE MALE – STANDARD TAIL


NUMBER I T A B C D E H L S018-07-04 (S)/SN S018-08-04 (S)/SN S018-09-04 (S)/SN S018-09-06 (S)/SN S018-12-06 (S)/SN S018-14-06 (S)/SN S018-12-08 (S)/SN S018-14-08 (S)/SN S018-17-08 (S)/SN S018-14-10 (S)/SN S018-17-10 (S)/SN S018-17-12 (S)/SN S018-19-12 (S)/SN S018-21-12 (S)/SN S018-19-16 (S)/SN S018-21-16 (S)/SN S018-26-20 (S)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1" 1-1/4"

7/16 – 20 1/2 –20 9/16 – 18 9/16 – 18 3/4 – 16 7/8 – 14 3/4 – 16 7/8 – 14 1-1/16 – 12 7/8 – 14 1-1/16 – 12 1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/8 – 12

27.5 27.5 28.5 28.5 31.5 31.5 32 34 41 34 41 42 43 43 43 43.5 48.5

13.5 13.5 13.5 13.5 14.5 14.5 15 15 18 15 18 19 19 19 19.5 19.5 27.5

12.7 16 16 16 22 26 22 26 29 26 29 29 32 35 32 35 44

S018 SERIES – JIC 37° FLARE MALE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S018-17-12 (L)/MS S018-19-12 (L)/MS S018-21-12 (L)/MS S018-19-16 (L)/MS S018-21-16 (L)/MS S018-26-20 (L)/MS S018-26-20 (L)/SH S018-26-20 (L)/SP

3/4" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

42 43 43 43 43.5 48.5 48.5 48.5

19 19 19 19.5 19.5 27.5 27.5 27.5

29 32 35 32 35 44 44 44

14

Contents Page

S019 SERIES – JIC BULKHEAD MALE 37° SEAT ANGLE – STANDARD TAIL



1/4" 1/4" 1/4" 1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4"

7/16 – 20 1/2 – 20 9/16 – 18 5/8 – 18 5/8 – 18 3/4 – 16 1-1/16 – 12 1-1/16 – 12 1-1/16 – 12 1-5/16 – 12

48 48 48 48 47 50 61 61 61.5 61

14 14 14 14 15 15 18 18 19 19

12.7 16 16 19 19 22 29 29 29 35

S019 SERIES – JIC BULKHEAD MALE 37° SEAT ANGLE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S019-17-12 (L)/MS S019-21-12 (L)/MS

3/4" 3/4"

1-1/16 – 12 1-5/16 – 12

61.5 61

19 19

29 35

15

Contents Page

S020 SERIES – UN ‘0’ – RING BOSS MALE – STANDARD TAIL


NUMBER I T A B C D E H L S020-08-04 (S)/SN S020-08-06 (S)/SN S020-09-06 (S)/SN S020-12-06 (S)/SN S020-14-06 (S)/SN S020-12-08 (S)/SN S020-14-08 (S)/SN S020-17-08 (S)/SN S020-14-10 (S)/SN S020-17-10 (S)/SN S020-17-12 (S)/SN S020-19-12 (S)/SN S020-21-12 (S)/SN S020-21-16 (S)/SN S020-26-20 (S)/SN

1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1-1/4"

1/2 – 20 1/2 – 20 9/16 – 18 3/4 –16 7/8 – 14 3/4 – 16 7/8 – 14 1-1/16 – 12 7/8 – 14 1-1/16 – 12 1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12

22 22

23.5 26 28 26 28 31

29.5 30 32 32

32.5 32.5 36.5

12.5 12.5 13.5

15 15 15 15 16 15 16 16 17

17.5 17.5 17.5

16 16 19 22 26 22 26 32 26 32 32 35 38 38 48

S020 SERIES – UN ‘0’ – RING BOSS MALE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S020-17-12 (L)/MS S020-19-12 (L)/MS S020-21-12 (L)/MS S020-21-16 (L)/MS S020-26-20 (L)/MS S020-26-20 (L)/SH S020-26-20 (L)/SP

3/4" 3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

32 32

32.5 32.5 36.5 36.5 36.5

16 17

17.5 17.5 17.5 17.5 17.5

32 35 38 38 48

48 48

16

Contents Page

S023 SERIES – SAE STRAIGHT FLANGE SOLID PIECE – MULTISPIRAL TAIL

HOSE BORE FLANGE DIMENSIONS mm PART

NUMBER I F A B C D E H SAE J1518C CODE

S023-12-12 (VL)/MS S023-14-12 (VL)/MS S023-16-12 (VL)/MS S023-18-12 (VL)/MS S023-16-16 (VL)/MS S023-18-16 (VL)/MS S023-20-16 (VL)/MS S023-24-16 (VL)/MS S023-20-20 (VL)/MS S023-20-20 (VL)/SH S023-20-20 (VL)/SP S023-22-20 (VL)/MS S023-22-20 (VL)/SH S023-22-20 (VL)/SP S023-24-20 (VL)/MS S023-24-20 (VL)/SH S023-24-20 (VL)/SP

3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38 41.4 44 48 44 48 50.8 60 50.8 50.8 50.8 54.1 54.1 54.1 60 60 60

53 53 52 57 55 62 57 57 64 64 64 64 64 64 66 66 66

61 62 61 62 61 62 61 61 61 61 61 62 62 62 61 61 61

S023 SERIES – SAE STRAIGHT FLANGE SOLID PIECE – STANDARD TAIL



S023-08-08 (VS)/SN S023-10-08 (VS)/SN S023-10-10 (VS)/SN S023-12-08 (VS)/SN S023-12-10 (VS)/SN

1/2" 1/2" 5/8" 1/2" 5/8"

30 34 34 38 38

53 53 53 53 53

61 61 61 61 61

17

Contents Page

S026 SERIES – BSP FEMALE INVERTED CONE 30° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H1 H2 S026-02-04 (S)/SN S026-04-04 (S)/SN S026-06-04 (S)/SN S026-04-06 (S)/SN S026-06-06 (S)/SN S026-08-06 (S)/SN S026-08-08 (S)/SN S026-12-08 (S)/SN S026-12-12 (S)/SN S026-16-16 (S)/SN S026-20-20 (S)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1-1/4"

1/8 – 28 1/4 – 19 3/8 – 19 1/4 – 19 3/8 – 19 1/2 – 14 1/2 – 14 3/4 – 14 3/4 – 14 1" – 11 1-1/4 – 11

20 20 21 21 23 25 27 32 31 40 45

16 19 22 19 22 26 26 32 32 38 50.8

12.7 12.7 16 16 16 22 22 26 26 32 44

S026 SERIES – BSP FEMALE INVERTED CONE 30° SEAT ANGLE – MULTISPIRAL TAIL


NUMBER I T A B C D E H1 H2 S026-12-12 (L)/MS S026-16-16 (L)/MS S026-20-20 (L)/MS S026-20-20 (L)/SH S026-20-20 (L)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

31 40 45 45 45

32 38 50.8 50.8 50.8

26 32 44 44 44

18

Contents Page

S051 SERIES – BSP 90° SWEPT ELBOW (SOLID PIECE) – STANDARD TAIL

HOSE BORE THREAD PART

NUMBER I T A B C D E H L S051-04-04 (VS)/SN S051-06-06 (VS)/SN S051-08-06 (VS)/SN S051-08-08 (VS)/SN S051-10-10 (VS)/SN S051-12-12 (VS)/SN S051-16-16 (VS)/SN S051-20-20 (VS)/SN

1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

1/4 – 19 3/8 – 19 1/2 – 14 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11 1-1/4 – 11

27.5 32 32 39 44 50 63 69

38.5 44 44 53 61 64 80 92

19 22 26 26 29 32 38 50.8

S051 SERIES – BSP 90° SWEPT ELBOW (SOLID PIECE) – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S051-12-12 (VL)/MS S051-16-16 (VL)/MS S051-20-20 (VL)/MS S051-20-20 (VL)/SH S051-20-20 (VL)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

50 63 69 69 69

64 80 92 92 92

32 38 50.8 50.850.8

19

Contents Page

S055 SERIES – JIC 90° SWEPT ELBOW 37° SEAT ANGLE (SOLID PIECE) – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S055-17-12 (VL)/MS S055-19-12 (VL)/MS S055-21-12 (VL)/MS S055-21-16 (VL)/MS S055-26-20 (VL)/MS S055-26-20 (VL)/SH S055-26-20 (VL)/SP

3/4" 3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

51.5 51.5 51.5 63 65 65 65

65 67.5 74.5 83 89.5 89.5 89.5

32 35 38 38 50.8 50.850.8

S055 SERIES – JIC 90° SWEPT ELBOW 37° SEAT ANGLE (SOLID PIECE) – STANDARD TAIL


NUMBER I T A B C D E H L S055-07-04 (VS)/SN S055-08-04 (VS)/SN S055-09-04 (VS)/SN S055-09-06 (VS)/SN S055-12-06 (VS)/SN S055-12-08 (VS)/SN S055-14-08 (VS)/SN S055-17-08 (VS)/SN S055-14-10 (VS)/SN S055-17-10 (VS)/SN S055-17-12 (VS)/SN S055-19-12 (VS)/SN S055-21-12 (VS)/SN S055-21-16 (VS)/SN S055-26-20 (VS)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1-1/4"

7/16 – 20 1/2 – 20 9/16 – 18 9/16 – 18 3/4 – 16 3/4 – 16 7/8 – 14 1-1/16 – 12 7/8 – 14 1-1/16 – 12 1-1/16 – 12 1-3/16 – 12 1-5/16 – 12 1-5/16 – 12 1-5/8 – 12

27.5 27.5 27.5 31.5 31.5 39 39 39 44.5 44.5 51.5 51.5 51.5 63 65

41 42 42 44.5 47 54 54 52 58.5 64.5 65 67.5 74.5 83 89.5

16 19 19 19 22 22 26 32 26 32 32 35 38 38 50.8

20

Contents Page

S056 SERIES – ORS FEMALE SWIVEL 90° ELBOW (SOLID PIECE) – MULTISPIRAL TAIL

HOSE BOR

E THREAD DIMENSIONS mm PART

NUMBER I T A B C D E H L

S056-19-12 (VL)/MS S056-23-16 (VL)/MS S056-27-20 (VL)/MS S056-27-20 (VL)/SH S056-27-20 (VL)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

13/16 – 12 1-7/16 – 12 1-11/16 – 12 1-11/16 – 12 1-11/16 – 12

51 60 74 74 74

66 76 78 78 78

35 44 48 48 48

S056 SERIES – ORS FEMALE SWIVEL 90° ELBOW (SOLID PIECE) – STANDARD TAIL


NUMBER I T A B C D E H L S056-09-04 (VS)/SN S056-11-06 (VS)/SN S056-13-08 (VS)/SN S056-16-10 (VS)/SN S056-19-12 (VS)/SN S056-23-16 (VS)/SN S056-27-20 (VS)/SN

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

9/16 – 18 11/16 – 16 13/16 – 16 1 – 14 13/16 – 12 1-7/16 – 12 1-11/16 – 12

33 34

37.5 47

51 60 74

33

41.5 50.5 50.5

66 76 78

19 22 26 32 35 44 48

21

Contents Page

S059 SERIES – SAE 90° SWEPT ELBOW FLANGE (SOLID PIECE) – STANDARD TAIL



S059-08-08 (VS)/SN S059-10-08 (VS)/SN S059-12-08 (VS)/SN S059-10-10 (VS)/SN S059-12-10 (VS)/SN

1/2" 1/2" 1/2" 5/8" 5/8"

30 34 38 34 38

39 39 39 43 43

36 36 36 40 40

61 61 61 61 61

S059 SERIES – SAE 90° SWEPT ELBOW FLANGE (SOLID PIECE) – MULTISPIRAL TAIL



S059-12-12 (VL)/MS S059-14-12 (VL)/MS S059-16-12 (VL)/MS S059-18-12 (VL)/MS S059-16-16 (VL)/MS S059-18-16 (VL)/MS S059-20-16 (VL)/MS S059-20-20 (VL)/MS S059-20-20 (VL)/SH S059-20-20 (VL)/SP S059-22-20 (VL)/MS S059-22-20 (VL)/SH S059-22-20 (VL)/SP S059-24-20 (VL)/MS S059-24-20 (VL)/SH S059-24-20 (VL)/SP

3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38

41.4 44 48 44 48

50.8 50.8 50.8 50.8 54.1 54.1 54.1

60 60 60

51 51 46 43 61 61 65 65 65 65 65 65 65 65

65 65

43 43 52 54 57 64 57 60 60 60 60 60 60 68 68 68

61 62 61 62 61 62 61 61 61 61 62 62 62 61 61 61

22

Contents Page

S060 SERIES – BSP 45° SWEPT ELBOW (SOLID PIECE) – STANDARD TAIL



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

1/4 – 19 3/8 – 19 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11 1-1/4 – 11

45 46 60 63 67 79 92

18 23 29 32 41 48 51

19 22 26 29 32 38

50.8

S060 SERIES – BSP 45° SWEPT ELBOW (SOLID PIECE) – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

67 79 92 92 92

41 48 51 51 51

32 38 50.8 50.850.8

23

Contents Page

S062 SERIES – SAE 22-1/2° SWEPT ELBOW FLANGE (SOLID PIECE) – MULTISPIRAL TAIL


NUMBER I F A B C D E H SAE 518C CODE

S062-12-12 (VL)/MS S062-16-12 (VL)/MS S062-16-16 (VL)/MS S062-18-16 (VL)/MS S062-20-16 (VL)/MS S062-20-20 (VL)/MS S062-20-20 (VL)/SH S062-20-20 (VL)/SP S062-24-20 (VL)/MS S062-24-20 (VL)/SH S062-24-20 (VL)/SP

3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38 44 44 48

50.8 50.8 50.8 50.8 60 60 60

50 48 55 66 64 65 65 65 65 65 65

12 12 18 20 19 21 21 21 24 24 24

61 61 61 62 61 61 61 61 61 61 61

S062 SERIES – SAE 22-1/2° SWEPT ELBOW FLANGE (SOLID PIECE) – STANDARD TAIL



S062-08-08 (VS)/SN S062-12-08 (VS)/SN

1/2" 1/2"

30 38

41 43

9 9

61 61

24

Contents Page




S063-08-08 (VS)/SN S063-12-08 (VS)/SN

1/2" 1/2"

30 38

41 43

12 12

61 61





3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38 44 44 48

50.8 50.8 50.8 50.8 60 60 60

52 52 60 68 63 71 71 71 71 71 71

15 15 21 23 22 24 24 24 28 28 28

61 61 61 62 61 61 61 61 61 61 61

25

Contents Page

S064 SERIES – JIC 45° SWEPT ELBOW 37° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H L S064-07-04 (VS)/SN S064-08-04 (VS)/SN S064-09-04 (VS)/SN S064-09-06 (VS)/SN S064-12-06 (VS)/SN S064-12-08 (VS)/SN S064-14-08 (VS)/SN S064-17-08 (VS)/SN S064-17-10 (VS)/SN S064-17-12 (VS)/SN S064-21-16 (VS)/SN S064-26-20 (VS)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" 1" 1-1/4"

7/16 – 20 1/2 – 20 9/16 – 18 9/16 – 18 3/4 – 16 3/4 – 16 7/8 – 14 1-1/16 – 12 1-1/16 – 12 1-1/16 – 12 1-5/16 – 12 1-5/8 – 12

43 43 43 48 48

49.5 51 53 58

66.5 85.5 94.5

16

17.5 19

23.5 25 26

27.5 29 35 45 55 51

16 19 19 19 22 22 26 32 32 32 38

50.8

S064 SERIES – JIC 45° SWEPT ELBOW 37° SEAT ANGLE – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

66.5 85.5 94.5 94.5 94.5

45 55 51 51 51

32 38

50.8 50.8 50.8

26

Contents Page




S066-08-08 (VS)/SN S066-12-08 (VS)/SN

1/2" 1/2"

30 38

43 44

26 27

61 61

S066 SERIES – SAE 60° SWEPT ELBOW FLANGE (SOLID PIECE) – MULTIPIRAL TAIL




3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38 44 44 48

50.8 50.8 50.8 50.8

60 60 60

57 54 67 70 67 74 74 74 76 76 76

35 33 36

40.5 37 37 37 37 37 37 37

61 61 61 62 61 61 61 61 61 61 61

27

Contents Page

S067 SERIES – SAE 67-1/2° SWEPT ELBOW FLANGE (SOLID PIECE) – STANDARD TAIL



S067-08-08 (VS)/SN S067-12-08 (VS)/SN

1/2" 1/2"

30 38

43 45

21 22

61 61

S067 SERIES – SAE 67-1/2° SWEPT ELBOW FLANGE (SOLID PIECE) – MULTISPIRAL TAIL




3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38 44 44 48

50.8 50.8 50.8 50.8 60 60 60

53 53 64 67 64 68 68 68 68 68 68

29 29 49

53.5 66 44 44 44 44 44 44

61 61 61 62 61 61 61 61 61 61 61

28

Contents Page




S068-12-12 (VL)/MS S068-14-12 (VL)/MS S068-16-12 (VL)/MS S068-18-12 (VL)/MS S068-16-16 (VL)/MS S068-18-16 (VL)/MS S068-20-16 (VL)/MS S068-20-20 (VL)/MS S068-20-20 (VL)/SH S068-20-20 (VL)/SP S068-22-20 (VL)/MS S068-22-20 (VL)/SH S068-22-20 (VL)/SP S068-24-20 (VL)/MS S068-24-20 (VL)/SH S068-24-20 (VL)/SP

3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

38

41.4 44 48 44 48

50.8 50.8 50.8 50.8 54.1 54.1 54.1

60 60 60

55 55 55 58 63 73 68 75 75 75 75 75 75 88 88 88

19 19 19 25 26 32 23 31 31 31 31 31 31 25 25 25

61 62 61 62 61 62 61 61 61 61 62 62 62 61 61 61




S068-08-08 (VS)/SN S068-12-08 (VS)/SN S068-10-10 (VS)/SN

1/2" 1/2" 5/8"

30 38 34

42 43 54

13 15 18

61 61 61

29

Contents Page

S094 SERIES – BANJO FOR BSP BOLTS – STANDARD TAIL

HOSE BORE

BOLT THREAD DIMENSIONS mm PART


1/4" 3/8" 1/2" 5/8" 3/4" 1"

1/4 – 19 3/8 – 19 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11

33 37 44 50 59

71

13.3 16.8

21 23

26.5 33.5

13

16 25 25 30

36

S094 SERIES – BANJO FOR BSP BOLT – MULTISPIRAL TAIL HOSE BORE



3/4" 1"

3/4 – 14 1" – 11

59

71

26.5 33.5

30

36

30

Contents Page

S095 SERIES – BANJO FOR METRIC BOLTS – STANDARD TAIL

HOSE BORE


NUMBER I T A B C D E H L S095-10-04 (S)/SN S095-12-04 (S)/SN S095-14-04 (S)/SN S095-14-06 (S)/SN S095-16-06 (S)/SN S095-18-08 (S)/SN S095-22-10 (S)/SN S095-26-12 (S)/SN S095-30-16 (S)/SN

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1"

10 x 1.5 12 x 1.5 14 x 1.5 14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5

31

33 35 35 36 38 50 59

71

10.3 12.3 14.3 14.3 16.3 18.3 22.3 26.3 30.3

10 12 14 14 16 20 25 30

36

S095 SERIES – BANJO FOR METRIC BOLTS - MULISPIRAL TAIL

HOSE BORE



3/4" 1"

26 x 1.5 30 x 1.5

59

71

26.3 30.3

30

36

31

Contents Page

S096 SERIES – LIFESAVER – MULTISPIRAL TAIL



S096-00-12 (L)/MS S096-00-16 (L)/MS S096-00-20 (L)/MS S096-00-20 (L)/SH S096-00-20 (L)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

18 20 24 24 24

26 32 44

44 44

S096 SERIES – LIFESAVER – STANDARD TAIL



S096-00-04 (S)/SN S096-00-06 (S)/SN S096-00-08 (S)/SN S096-00-10 (S)/SN S096-00-12 (S)/SN S096-00-16 (S)/SN S096-00-20 (S)/SN

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

13

14.5 15

16.5 18 20 24

12.7

16 19 23 26 32 44

32

Contents Page

S097 SERIES – STANDPIPE – LIGHT DUTY – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S097-20-12 (L)/MS S097-22-12 (L)/MS S097-25-16 (L)/MS S097-28-16 (L)/MS

3/4" 3/4" 1" 1"

42 40 45 47

36 34 38 40

20 22 25 28

15 18 20 23

S097 SERIES – STANDPIPE – LIGHT DUTY – STANDARD TAIL



1/4" 3/8" 3/8" 1/2" 1/2" 5/8"

29 35 35 35 35 41

25 30 30 30 30 36

8 10 12 14 15 18

5.5

7 9

9.5 12

14.5

S098 SERIES – STANDPIPE – HEAVY DUTY – STANDARD TAIL


NUMBER I T A B C D E H S098-10-04 (S)/SN S098-12-04 (S)/SN S098-14-06 (S)/SN S098-16-08 (S)/SN S098-18-08 (S)/SN S098-20-10 (S)/SN S098-22-10 (S)/SN S098-25-12 (S)/SN S098-30-16 (S)/SN

1/4" 1/4" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 1"

29 34 35 39 41 41 39 44 47

25 30 30 34 36 36 34 38 40

10 12 14 16 18 20 22 25 30

5.5

9 9

12 14.5 14.5

18 18 23

33

Contents Page

S098 SERIES – STANDPIPE – HEAVY DUTY – MULTISPIRAL TAIL


NUMBER I T A B C D E H S098-25-12 (L)/MS S098-30-16 (L)/MS

3/4" 1"

44 47

38 40

25 30

18 23

S099 SERIES – STANDPIPE – FRENCH TYPE – STANDARD TYPE



3/8" 1/2" 1/2" 5/8" 3/4" 1"

35 39 41 41 44 47

30 34 36 36 38 40

13.25 16.75 21.25 21.25 26.75 33.5

9

12 14.5 14.5

20 25

34

Contents Page

S099 SERIES – STANDPIPE – FRENCH TYPE – MULTISPIRAL TAIL

HOSE BORE



3/4" 1"

44 47

38 40

26.75 33.5

20 25

S551 SERIES – BSP COMPACT ELBOW – STANDARD TAIL


NUMBER I T A B C D E H1 H2 L S551-04-04 (S)/SN S551-06-06 (S)/SN S551-08-08 (S)/SN S551-10-10 (S)/SN S551-12-12 (S)/SN S551-16-16 (S)/SN S551-20-20 (S)/SN

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

1/4 – 19 3/8 – 19 1/2 – 14 5/8 – 14 3/4 – 14 1" – 11 1-1/4 – 11

24 27 31 34 37 42 49

24 32 35 40 46 54 61

16 19 29 32 38 44 57

19 22 26 29 32 38

50.8

35

Contents Page

S551 SERIES – BSP COMPACT ELBOW – MULTISPIRAL TAIL


NUMBER I T A B C D E H1 H2 L S551-12-12 (L)/MS S551-16-16 (L)/MS S551-20-20 (L)/MS S551-20-20 (L)/SH S551-20-20 (L)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

3/4 – 14 1" – 11 1-1/4 – 11 1-1/4 – 11 1-1/4 – 11

37 42 49 49 49

46 54 61 61 61

38 44 57 57 57

32 38

50.8 50.8 50.8

36

Contents Page

S555 SERIES – JIC COMPACT ELBOW – MULTISPIRAL TAIL


NUMBER I T A B C D E H1 H2 S555-17-12 (L)/MS S555-21-16 (L)/MS S555-26-20 (L)/MS S555-26-20 (L)/SH S555-26-20 (L)/SP

3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-1/16 – 12 1-5/16 – 12 1-5/8 – 12 1-5/8 – 12 1-5/8 – 12

35 37 44 44 44

47 54 61 61 61

38 44 48 48 48

32 38

50.8 50.8 50.8

S555 SERIES – JIC COMPACT ELBOW – STANDARD TAIL


NUMBER I T A B C D E H1 H2 S555-07-04 (S)/SN S555-08-04 (S)/SN S555-09-04 (S)/SN S555-09-06 (S)/SN S555-12-08 (S)/SN S555-14-10 (S)/SN S555-17-12 (S)/SN S555-21-16 (S)/SN S555-26-20 (S)/SN

1/4" 1/4" 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

7/16 – 20 1/2 – 20 9/16 – 18 9/16 – 18 3/4 – 16 7/8 – 14 1-1/16 – 12 1-5/16 – 12 1-5/8 – 12

24 24 24 26 29 32 35 37 44

27 27 30 30 44 44 47 54 61

19 22 22 22 29 32 38 44 48

16 19 19 19 22 26 32 38

50.8

37

Contents Page

S666 SERIES – ‘ORS’ FEMALE SWIVEL 45° ELBOW – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

1-3/16 – 12 1-7/16 – 12 1-11/16 – 12 1-11/16 – 12 1-11/16 – 12

60 72 73 73 73

32 29 38 38 38

35 41 48 48 48

S666 SERIES – ‘ORS’ FEMALE SWIVEL 45° ELBOW – STANDARD TAIL



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

9/16 – 18 11/16 – 16 13/16 – 16 1 – 14 1-3/16 – 12 1-7/16 – 12 1-11/16 – 12

46 49 58 52 60 72 73

13

22.5 15 22 32 29 38

19 22 26 32 35 41 48

38

Contents Page

S801 SERIES – METRIC FEMALE 60° SEAT ANGLE – STANDARD TAIL



1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

12 x 1.5 14 x 1.5 16 x 1.5 14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5 38 x 1.5 45 x 1.5

20 20 20 20 23 23 24 24 25 27 31 36

16 19 22 19 22 22 26 26 32 35 44 57

S801 SERIES – METRIC FEMALE 60° SEAT ANGLE – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 38 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

27 31 36 36 36

35 44 57 57 57

39

Contents Page

S802 SERIES – METRIC FEMALE – FLAT SEAT – STANDARD TAIL



S802-18-06 (S)/SN S802-20-06 (S)/SN S802-20-08 (S)/SN S802-22-08 (S)/SN

3/8" 3/8" 1/2" 1/2"

18 x 1.5 20 x 1.5 20 x 1.5 22 x 1.5

26 26 33 33

22 26 26 26

40

Contents Page

S803 SERIES – METRIC FEMALE – LIGHT DUTY TYPE 24° SEAT ANGLE – STANDARD TAIL



1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1-1/4"

12 x 1.5 14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 26 x 1.5 30 x 2 36 x 2 45 x 2

19 19 23 24 24 27 27 28 31 41

16 19 22 22 26 32 32 35 44 57

S803 SERIES – METRIC FEMALE – LIGHT DUTY TYPE 24° SEAT ANGLE – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 2 36 x 2 45 x 2 45 x 2 45 x 2

28 31 41 41 41

35 44 57 57 57

41

Contents Page

S804 SERIES – METRIC FEMALE – HEAVY DUTY 24° SEAT ANGLE – MULTISPIRAL TAIL



3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2 52 x 2

31 39 43 43 43 43

44 48 60 606060

S804 SERIES – METRIC FEMALE – HEAVY DUTY 24° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H L S804-16-04 (S)/SN S804-18-04 (S)/SN S804-22-06 (S)/SN S804-24-08 (S)/SN S804-30-10 (S)/SN S804-36-12 (S)/SN S804-42-16 (S)/ΣΝ S804-52-16 (S)/SN S804-52-20 (S)/SN

1/4" 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1" 1-1/4"

16 x 1.5 18 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2 52 x 2

22 23 25 26 28 31 39 43 43

22 22 26 29 35 44 48 60 60

42

Contents Page

S805 SERIES – METRIC STRAIGHT FEMALE – FRENCH TYPE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S805-30-12 (L)/MS S805-34-12 (L)/MS S805-36-12 (L)/MS S805-45-16 (L)/MS

3/4" 3/4" 3/4" 1"

30 x 1.5 34 x 1.5 36 x 1.5 45 x 1.5

33 33 39 37

35 44 44 57

S805 SERIES – METRIC STRAIGHT FEMALE – FRENCH TYPE – STANDARD TAIL



3/8" 1/2" 5/8" 3/4" 3/4" 3/4" 1"

20 x 1.5 24 x 1.5 30 x 1.5 30 x 1.5 34 x 1.5 36 x 1.5 45 x 1.5

25 27 30 33 33 39 37

26 29 35 35 44 44 57

S806 SERIES – ‘0’-RING STRAIGHT FEMALE(DKO) HEAVY DUTY TYPE– STANDARD TYPE


NUMBER I T A B C D E H L S806-20-06 (S)/SN S806-22-06 (S)/SN S806-24-08 (S)/SN S806-30-10 (S)/SN S806-36-12 (S)/SN S806-42-16 (S)/SN S806-52-16 (S)/SN S806-52-20 (S)/SN

3/8" 3/8" 1/2" 5/8" 3/4" 1" 1" 1-1/4"

20 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2 52 x 2

36 37 39 46 47 52 56 56

26 26 29 35 44 48 63 63

43

Contents Page

S806 SERIES – ‘0’-RING STRAIGHT FEMALE(DKO) HEAVY DUTY TYPE – MULTISPIRAL TAIL



3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2 52 x 2

47 52 56 56 56 56

44 48 63 636363

S811 SERIES – METRIC MALE 60° SEAT – STANDARD TAIL



1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1-1/4"

12 x 1.5 14 x 1.5 16 x 1.5 14 x 15 16 x 1.5 18 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5 38 x 1.5 45 x 1.5

23 23 27 25 28 28 28 31 33 37 40 42

16 16 19 16 19 19 19 26 29 32 44 48

44

Contents Page

S811 SERIES – METRIC MALE 60° SEAT – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 38 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

37 40 42 42 42

32 44 48 48 48

45

Contents Page

S813 SERIES – METRIC MALE 24° SEAT LIGHT DUTY TYPE – MULTISPIRAL TAIL



3/4" 3/4" 3/4" 1-1/4" 1-1/4" 1-1/4"

26 x 1.5 30 x 2 36 x 2 45 x 2 45 x 2 45 x 2

31 33 36 40 40 40

18 22 28 35 35 35

29 32 38 48 48 48

S813 SERIES – METRIC MALE 24° SEAT LIGHT DUTY TYPE – STANDARD TAIL


NUMBER I T A B C D E H L S813-12-04 (S)/SN S813-14-04 (S)/SN S813-16-06 (S)/SN S813-18-06 (S)/SN S813-22-08 (S)/SN S813-26-08 (S)/SN S813-26-10 (S)/SN S813-26-12 (S)/SN S813-30-12 (S)/SN S813-36-12 (S)/SN S813-45-20 (S)/SN

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 1-1/4"

12 x 1.5 14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 26 x 1.5 26 x 1.5 30 x 2 36 x 2 45 x 2

22 22 25 25 28 28 28 31 33 36 40

6 8

10 12 15 18 18 18 22 28 35

16 16 19 22 26 29 29 29 32 38 48

46

Contents Page

S814 SERIES – METRIC MALE 24° SEAT HEAVY DUTY TYPE – MULTISPIRAL TAIL


NUMBER I T A B C D E H L S814-30-12 (L)/MS S814-36-12 (L)/MS S814-36-16 (L)/MS S814-42-16 (L)/MS S814-52-16 (L)/MS S814-42-20 (L)/MS S814-42-20 (L)/SH S814-42-20 (L)/SP S814-52-20 (L)/MS S814-52-20 (L)/SH S814-52-20 (L)/SP

3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

30 x 2 36 x 2 36 x 2 42 x 2 52 x 2 42 x 2 42 x 2 42 x 2 52 x 2 52 x 2 52 x 2

35 37 40 42 44 44 44 44 46 46 46

20 25 25 30 38 30 30 30 38 38 38

32 38 38 44 57 48 48 48 57 57 57

S814 SERIES – METRIC MALE 24° SEAT HEAVY DUTY TYPE – STANDARD TAIL


NUMBER I T A B C D E H L S814-16-04 (S)/SN S814-18-04 (S)/SN S814-18-06 (S)/SN S814-20-06 (S)/SN S814-22-06 (S)/SN S814-24-08 (S)/SN S814-30-10 (S)/SN S814-30-12 (S)/SN S814-36-12 (S)/SN S814-36-16 (S)/SN S814-42-16 (S)/SN S814-52-16 (S)/SN S814-42-20 (S)/SN S814-52-20 (S)/SN

1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 5/8" 3/4" 3/4" 1" 1" 1" 1-1/4" 1-1/4"

16 x 1.5 18 x 1.5 18 x 1.5 20 x 1.5 22 x 1.5 24 x 1.5 30 x 2 30 x 2 36 x 2 36 x 2 42 x 2 52 x 2 42 x 2 52 x 2

25 25 27 27 29 30 32 35 37 40 42 44 44 46

10 10 10 12 14 16 20 20 25 25 30 38 30 38

19 22 22 22 26 26 32 32 38 38 44 57 48 57

S815 SERIES – METRIC MALE – FRENCH TYPE – STANDARD TAIL



3/8" 1/2" 5/8" 3/4" 3/4" 1" 1-1/4"

20 x 1.5 24 x 1.5 30 x 1.5 30 x 1.5 36 x 1.5 45 x 1.5 45 x 1.5

26 28 30 31 31 36 37

13.25 16.75 21.25

22 26.75 33.5 33.5

22 26 32 32 38 48 48

47

Contents Page

S815 SERIES – METRIC MALE – FRENCH TYPE – MULTISPIRAL TAIL



3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 36 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

31 31 36 37 37 37

22

26.75 33.5 33.5 33.5 33.5

32 38 48 484848

S818 JIS 30° FLARE MALE – STANDARD TAIL


NUMBER I T A B C D E H L S818-10-04 (1.0)(S)/SN S818-12-04 (1.0)(S)/SN S818-12-04 (1.5)(S)/SN S818-12-06 (1.5)(S)/SN S818-14-04 (S)/SN S818-14-06 (S)/SN S818-16-06 (S)/SN S818-22-08 (S)/SN

1/4" 1/4" 1/4" 3/8" 1/4" 3/8" 3/8" 1/2"

1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5

27.7 28.2 28.2 28.5 28.7 31 32 38

12.7 12.7 12.7 13 12.7 15 15 17

12.7 16 16 16 16 16 19 26

48

Contents Page

49

Contents Page

S819 JIS BULKHEAD MALE 30° SEAT ANGLE – STANDARD TAIL


NUMBER I T A B C D E H L S819-10-04 (1.0) (S)/SN S819-10-04 (1.25) (S)/SN S819-10-04 (1.5) (S)/SN S819-12-04 (1.0) (S)/SN S819-12-04 (1.5) (S)/SN S819-12-06 (1.5) (S)/SN S819-14-04 (S)/SN S819-14-06 (S)/SN S819-16-06 (S)/SN S819-18-06 (S)/SN S819-20-06 (S)/SN S819-16-08 (S)/SN S819-20-08 (S)/SN S819-22-08 (S)/SN

1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

1.0 1.25 1.5 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

39.7 39.7 39.7 44.7 44.7 43.2 44.7 43.2 44.2 45.2 49.7 44.5 50 50

12.2 12.2 12.2 12.7 12.7 11.2 12.7 11.2 13.2 13.2 15.2 13.5 15.5 15.5

12.7 12.7 12.7 16 16 16 16 16 19 19 22 19 22 26

50

Contents Page

S851 SERIES – METRIC 90° SWEPT ELBOW 60° CONE (SOLID PIECE) – STANDARD TAIL



1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5 38 x 1.5 45 x 1.5

28 33 33 39 44 50 62 69

39 47 48 55 65 67 79 82

19 22 22 26 32 35 44 57

S851 SERIES – METRIC 90° SWEPT ELBOW 60° CONE (SOLID PIECE) – MULTISPIRAL TAIL



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 38 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

50 62 69 69 69

67 79 82 82 82

35 44 57 57 57

51

Contents Page

S853 SERIES – METRIC 90° SWEPT ELBOW – LIGHT DUTY 24° SEAT -STANDARD TAIL (SOLID PIECE)



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

14 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 30 x 2 36 x 2 45 x 2

28 33 39 44 50 63 69

40 48 55 65 67 79 82

19 22 26 32 35 44 57

S853 SERIES – METRIC 90° SWEPT ELBOW – LIGHT DUTY 24° SEAT – MULTISPIRAL TAIL (SOLID PIECE)



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 2 36 x 2 45 x 2 45 x 2 45 x 2

50 63 69 69 69

67 79 82 82 82

35 44 57 5757

52

Contents Page

S854 SERIES – METRIC 90° SWEPT ELBOW – HEAVY DUTY 24° SEAT – STANDARD TAIL (SOLID PIECE)



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

18 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2

28 32 39 44 50 63 69

41 46 53 58 66 75 84

22 26 29 35 44 48 57

S854 SERIES – METRIC 90° SWEPT ELBOW – HEAVY DUTY 24° SEAT – MULTISPIRAL TAIL (SOLID PIECE)



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2

50 63 69 69 69

66 75 84 84 84

44 48 575757

S855 SERIES – METRIC 90° SWEPT ELBOW – FRENCH TYPE 24° SEAT – STANDARD TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S855-20-06 (VS)/SN S855-24-08 (VS)/SN S855-30-10 (VS)/SN S855-36-12 (VS)/SN S855-45-16 (VS)/SN

3/8" 1/2" 5/8" 3/4" 1"

20 x 1.5 24 x 1.5 30 x 1.5 36 x 1.5 45 x 1.5

33 39 44 50 63

48 56 64 65 77

26 29 35 44 57

53

Contents Page

S855 SERIES – METRIC 90° SWEPT ELBOW – FRENCH TYPE 24° SEAT – MLTISPIRAL TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S855-36-12 (VL)/MS S855-45-16 (VL)/MS

3/4" 1"

36 x 1.5 45 x 1.5

50 63

65 77

44 57

54

Contents Page

S856 SERIES – METRIC 90° ‘O’-RING SWEPT ELBOW (DKO) – STANDARD TAIL (SOLID PIECE)



3/8" 3/8" 1/2" 5/8" 3/4" 1" 1" 1-1/4"

20 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2 52 x 2

32 32 39 44 50 63 63 69

44 47 53 58 64 76 86 86

26 26 29 35 44 48 65 65

S856 SERIES – METRIC 90° ‘O’-RING SWEPT ELBOW (DKO) – MULTISPIRAL TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S856-36-12 (VL)/MS S856-42-16 (VL)/MS S856-52-16 (VL)/MS S856-52-20 (VL)/MS S856-52-20 (VL)/SH S856-52-20 (VL)/SP

3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2 52 x 2

50 63 63 69 69 69

64 76 86 86 86 86

44 48 65 65 65 65

55

Contents Page

S861 SERIES – METRIC 45° SWEPT ELBOW 60° SEAT – STANDARD TAIL (SOLID PIECE)



1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5 38 x 1.5 45 x 1.5

40 44 45 45 57 57 69 77

25 26 26 30 35 36 41 45

19 22 22 26 32 35 44 57

S861 SERIES – METRIC 45° SWEPT ELBOW 60° SEAT – MULTISPIRAL TAIL (SOLID PIECE)



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 38 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

57 69 77 77 77

36 41 45 45 45

35 44 575757

S863 SERIES – METRIC 45° SWEPT ELBOW – LIGHT DUTY 24° SEAT – STANDARD TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S863-14-04 (VS)/SN S863-18-06 (VS)/SN

1/4" 3/8"

14 x 1.5 18 x 1 5

37 43

21 26

19 22

56

Contents Page

S863 SERIES – METRIC 45° SWEPT ELBOW – LIGHT DUTY 24° SEAT – MULTISPIRAL TAIL (SOLID PIECE)



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

30 x 2 36 x 2 45 x 2 45 x 2 45 x 2

57 69 81 81 81

36 41 45 45 45

35 44 57 5757

57

Contents Page

S864 SERIES – METRIC 45° SWEPT ELBOW – HEAVY DUTY 24° SEAT – STANDARD TAIL (SOLID PIECE)



1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"

18 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2

39 42 46 53 59 68 80

26 30 34 36 41 44 45

22 26 29 35 44 48 57

S864 SERIES – METRIC 45° SWEPT ELBOW – HEAVY DUTY 24° SEAT – MULTISPIRAL TAIL (SOLID PIECE)



3/4" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2

59 68 80 80 80

41 44 45 45 45

44 48 575757

58

Contents Page

S865 SERIES – METRIC 45° SWEPT ELBOW – FRENCH TYPE 24° SEAT – STANDARD TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S865-20-06 (VS)/SN S865-24-08 (VS)/SN S865-30-10 (VS)/SN S865-36-12 (VS)/SN S865-45-16 (VS)/SN

3/8" 1/2" 5/8" 3/4" 1"

20 x 1.5 24 x 1.5 30 x 1.5 36 x 1.5 45 x 1.5

49 56 56 62 82

27 31 31 35 42

26 29 35 44 57

S865 SERIES – METRIC 45° SWEPT ELBOW – FRENCH TYPE 24° SEAT – MULTISPIRAL TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S865-36-12 (VL)/MS S865-45-16 (VL)/MS

3/4" 1"

36 x 1.5 45 x 1.5

62 82

35 42

44 57

S866 SERIES – METRIC 45° ‘0’ – RING SWEPT ELBOW (DKO) – STANDARD TAIL (SOLID PIECE)



3/8" 3/8" 1/2" 5/8" 3/4" 1" 1" 1-1/4"

20 x 1.5 22 x 1.5 24 x 1.5 30 x 2 36 x 2 42 x 2 52 x 2 52 x 2

46 48 50 58 62 71 90 90

24 26 29 32 34 40 49 49

26 26 29 35 44 48 57 57

59

Contents Page

S866 SERIES – METRIC 45° ‘0’ – RING SWEPT ELBOW (DKO) – MULTISPIRAL TAIL (SOLID PIECE)


NUMBER I T A B C D E H L S866-36-12 (VL)/MS S866-42-16 (VL)/MS S866-52-16 (VL)/MS S866-52-20 (VL)/MS S866-52-20 (VL)/SH S866-52-20 (VL)/SP

3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4"

36 x 2 42 x 2 52 x 2 52 x 2 52 x 2 52 x 2

62 71 90 90 90 90

34 40 49 49 49 49

44 48 57 575757

60

Contents Page

S870 SERIES – JAPANESE METRIC FEMALE 30° SEAT – MULTISPIRAL TAIL


NUMBER I T A B C D E H1 H2 S870-30-12 (L)/MS S870-33-12 (L)/MS S870-33-16 (L)/MS S870-36-16 (L)/MS S870-36-20 (L)/MS S870-36-20 (L)/SH S870-36-20 (L)/SP S870-42-20 (L)/MS S870-42-20 (L)/SH S870-42-20 (L)/SP

3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"

30 x 1.5 33 x 1.5 33 x 1.5 36 x 1.5 36 x 1.5 36 x 1.5 36 x 1.5 42 x 1.5 42 x 1.5 42 x 1.5

36.5 37.5 37.5

40 45 45 45 48 48 48

23.5 22.5 22.5

26 26 26 26 28 28 28

35 38 38 44 44 44 44 48 48 48

29 32 32

S870 SERIES – JAPANESE METRIC FEMALE 30° SEAT – STANDARD TAIL


NUMBER I T A B C D E H1 H2 S870-14-04 (S)/SN S870-16-06 (S)/SN S870-18-06 (S)/SN S870-22-08 (S)/SN S870-24-08 (S)/SN S870-24-10 (S)/SN S870-30-12 (S)/SN S870-33-12 (S)/SN S870-33-16 (S)/SN S870-36-16 (S)/SN S870-36-20 (S)/SN S870-42-20 (S)/SN

1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4"

14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 24 x 1.5 24 x 1.5 30 x 1.5 33 x 1.5 33 x 1.5 36 x 1.5 36 x 1.5 42 x 1.5

22 24 26 33 33.5 36.5 36.5 37.5 37.5 40 45 48

16.5 17 17 21 20.5 23.5 23.5 22.5 22.5 26 26 28

19 22 22 26 29 29 35 38 38 44 44 48

16 16 19 22 26 26 29 32 32

61

Contents Page

S880 SERIES – METRIC MALE WITH ‘0’ RING GROOVE – MULTISPIRAL TAIL



3/4" 1" 1-1/4 1-1/4 1-1/4

32 x 1.5 40 x 1.5 45 x 1.5 45 x 1.5 45 x 1.5

32 38

40.5 40.5 40.5

35 44 48 48 48

62

Manufacturer & Exporter SUNWAY HYDRAULICS INDUSTRIES SDN BHD (103260-H) Factory: No. 1-4, Jalan SR 4/20, Serdang Raya, 43300 Seri Kembangan, Selangor Darul Ehsan, Malaysia. Tel: (60)3 89482622 Fax: (60)3 89482637 Website:www.sunway.com.my/sunflex E-mail: [email protected]

Sunway Sunflex Catalog 1 Piece Type

Documents

Transcript of Sunway Sunflex Catalog 1 Piece Type