SUMMER OFF-THE-SHELF 2005 · 2015-11-02 · OFF-THE-SHELF 2 SUMMER 2005 VISIT US AT: OFF-THE-SHELF...
Transcript of SUMMER OFF-THE-SHELF 2005 · 2015-11-02 · OFF-THE-SHELF 2 SUMMER 2005 VISIT US AT: OFF-THE-SHELF...
Order Online at: www.hittite.com20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Boston • Istanbul • London • Munich • Seoul • Shanghai
NEW RF TO MILLIMETERWAVE IC PRODUCTS FROM HITTITE
SUMMER
2005OFF-THE-SHELF
Medium Power Amps
HMC383 & HMC451
• Covering 5 to 30 GHz • Gain: 16 to 22 dB • Saturated Output Power: +18 to +22 dBm
See Page 2
INSIDE.....
SPDT Switch Module
HMC-C011
• DC - 20 GHz • 50 dB Isolation • Fast Switching: 1 nS
See Page 3
24 GHz VCO w/ ÷16
HMC533LP4
• Output Power: +11 dBm • 100 kHz SSB Phase Noise: -95 dBc/Hz • Single +5V Supply
See Page 5
HITTITE STANDARD PRODUCTS ENABLE
ALL SMT MICROWAVE RADIO DESIGN Microwave and millimeterwave designers have traditionally used die components to satisfy demanding requirements for the transmit (Tx), receive (Rx), LO generation, and LO distribution sections of the radio. In order to reduce overall cost, high frequency designers are turning more often to surface mount (SMT) components and a PCB based approach, in order to leverage in-house automated pick and place and reflow
equipment. Within the past year, Hittite Microwave has released 42 new SMT products for the microwave radio and millimeterwave market, all of which are available in RoHS compliant packaging.
(Continued on page 6)
LOW NOISE PLO MMIC FOR 15 GHZ VSAT APPLICATIONS
Integrates VCO, Phase/Frequency Detector, Prescaler & Loop Amp.Building upon our extensive product line of MMIC VCOs, Hittite announces an InGaP HBT Phase Locked Oscillator (PLO) MMIC for VSAT subscriber equipment. The HMC535LP4 PLO MMIC provides a single ended RF output in the range of 14.6 to 15.4 GHz, while delivering high output power of +11 dBm, and extremely low single sideband phase noise of -110 dBc/Hz at 100 kHz offset. Output power and phase noise performance are excellent over temperature and shock due to the monolithic construction.
The PLO MMIC accepts a single-ended, or a differential reference oscillator input signal in the range of 228 to 240 MHz, with a power level between 0 and +10 dBm. The reference signal source may be fixed or swept.
Product Showcase
* 21 NEW PRODUCTS RELEASED!
BROADBAND HIGH DYNAMIC RANGE
LNA FOR WIRED & WIRELESS APPLICATIONS
GaAs pHEMT MMIC Combines Low Noise Figure & High IP3 from 0.3 to 3.0 GHzA new high linearity SMT LNA meets the needs of RF design engineers. The HMC374 LNA is well suited for applications within cellular /3G infrastructure, repeaters, WiMAX, broadband wireless access, and ISM frequency bands between 300 and 3000 MHz. Compared to discrete solutions, the HMC374 GaAs pHEMT MMIC LNA offers higher reliability, smaller PCB footprint and lower component count.
The HMC374 exhibits a low 1.8 dB Noise Figure, with +36 dBm output IP3, and 15 dB small signal gain. This self biased LNA is unconditionally stable & provides very consistent performance over temperature. The high output IP3 is particularly well suited in applications where the output of the LNA is fed directly into a high IP3 mixer, or applications where the LNA is succeeded by a high loss device such as a power splitter, or an attenuator.
The HMC374 is housed in a SOT26 package, and is offered in both standard (HMC374) and RoHS compliant (HMC374E) versions. Evaluation samples and production quantities are available from stock.
(Continued on page 6)
Figure 1. HMC535LP4 PLO
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com2
OF
F-T
HE
-SH
ELF
3 VISIT US AT: www.hittite.com SUMMER 2005
BROADBAND GAIN BLOCKS, DRIVERS & POWER AMPS
HMC474MP86 +5V SiGe Gain Block, DC - 6 GHz
Features
Gain: 15.5 dB
P1dB Output Power: +8 dBm
Output IP3: +22 dBm
Cascadable 50 Ohm I/Os
Single Supply: +3V to +10V
Available RoHS Compliant
Low Cost Gain Stage!The HMC474MP86 is a general purpose SiGe HBT Gain Block MMIC SMT Amplifier covering DC to 6 GHz. This Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage with up to +10 dBm output power. The HMC474MP86 offers 15.5 dB of gain with a +22 dBm output IP3 at 850 MHz while requiring only 25 mA from a single positive supply. The HMC474MP86 is an ideal buffer amplifier for Cellular / 3G, Broadband Cable, Fixed Wireless & IF applications.
HMC383 & HMC451 Medium Power Amplifiers Cover 5 to 30 GHz
Gain & Noise Figure
Features
Gain: 16 to 22 dB
Saturated Output Power: +18 to +22 dBm
Output IP3: +25 to +30 dBm
Single +5V Supply
50 Ohm Matched I/Os
Compact Size, Flat Output Power!The HMC383 and HMC451 are general purpose GaAs PHEMT MMIC Driver Amplifiers operating between 12 to 30 GHz & 5 to 20 GHz. These amplifiers provide 16 to 22 dB of gain and +18 to +22 dBm of saturated power from +5V supply voltages. Consistent gain and output power across each operating band make it possible to use a common driver/LO amplifier approach in multiple radio bands. Both the HMC383 and HMC451 amplifiers can easily be integrated into Multi-Chip-Modules (MCMs) due to their small size.
HMC383LC4 SMT Medium Power Amplifier, 12 - 30 GHz
Features
Gain: 15 dB
Saturated Output Power: +18 dBm
Single +5V Supply
50 Ohm Matched I/Os
RoHS Compliant 4 x 4 mm Package
Multi-Purpose; Easy to Use!The HMC383LC4 is a general purpose GaAs PHEMT MMIC Driver Amplifier housed in a leadless RoHS compliant SMT package. The amplifier provides 15 dB of gain and +18 dBm of saturated power from a +5.0 V supply voltage. Consistent gain and output power across the operating band make it possible to use a common driver/LO amplifier approach in multiple radio bands. The RF I/Os are DC blocked and matched to 50 Ohms for ease of use. The HMC383LC4 elimates the need for wire bonding, allowing use of surface mount manufacturing techniques.
�
�
�
�
�
��
��
��
��
��
��
� � � � � � �
������
��������
�
���������������
Broadband Gain
�
��
��
��
��
� �� �� �� �� ��
������
������
��������
�
���������������
Broadband Gain & Return Loss
���
���
���
��
�
�
��
��
��
� �� �� �� �� �� �� �� �� �� �� �� ��
���������
������������
�
���������������
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com2
OF
F-T
HE
-SH
ELF
3 VISIT US AT: www.hittite.com SUMMER 2005
BROADBAND, HIGH PERFORMANCE CONTROL DEVICES
HMC547LP3 Broadband High Isolation SPDT SMT Switch, DC - 20 GHz
Features
High Isolation: 50 dB @ 5 GHz 38 dB @ 20 GHz
Low Insertion Loss: 1.5 dB @ 5 GHz 2.0 dB @ 20 GHz
3 x 3 mm QFN SMT Package
Available RoHS Compliant
Ideal for Test Equipment!The HMC547LP3 is a broadband high isolation non-reflective GaAs MESFET SPDT switch in a leadless 3 x 3 mm QFN SMT plastic package. Covering DC to 20 GHz, the switch offers high isolation of 50 dB @ 5 GHz and 38 dB @ 20 GHz, with +48 dBm IP3 and very fast switching speed of 6 nS. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply.
HMC346LC3B Wideband Analog SMT VVA, DC - 18 GHz
Features
30 dB Attenuation Range
Absorptive
Low Phase Shift vs. Attenuation
Simplified Voltage Control
RoHS Compliant 3 x 3 mm SMT Package
Stable Insertion Phase!The HMC346LC3B is an absorptive Voltage Variable Attenuator (VVA) in a leadless RoHS compliant 3 x 3 mm SMT package operating from DC - 18 GHz. It features an on-chip reference attenuator for use with an external op-amp to provide simple single voltage attenuation control, 0 to -3V. The device is ideal in designs where an analog DC control signal must control RF signal levels over a 30 dB amplitude range.
HMC-C011 High Isolation SPDT Switch Module, DC - 20 GHz
Features
Isolation: 50 dB
Insertion Loss: 2 dB
Fast Switching: 1 nS
CMOS Control
Low Video Transients: 20 mV pk-pk
Field Replacable SMA Connectors
Ideal for Test Equipment!The HMC-C011 is a high performance non-reflective SPDT switch in an hermetic connectorized housing with field replaceable SMA connectors. Covering DC to 20 GHz, the switch offers 2 dB of insertion loss, 35 to 65 dB isolation and +23 dBm of input P1dB. The switch includes a high speed CMOS driver providing extremely fast 1 nanosecond rise and fall times, low video transients and requires a single positive +5V bias.
Insertion Loss & Isolation
��
��
��
��
��
��
�
���
���
���
���
���
���
���
� � �� �� �� ��
��������������
��������������������
���
��
���
���
��
���
���
���
���
���
�����
���������������
Insertion Loss & Isolation
��
��
��
��
��
��
��
�
���
���
���
���
���
���
���
�
� � �� �� ��
���
��
���
���
��
���
���
���
���
���
�����
���������������
Relative Attenuation
���
���
���
���
���
���
���
��
�
� � � � � �� �� �� �� ��
��
��
��
��
���
����
�
���������������
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com4
OF
F-T
HE
-SH
ELF
5 VISIT US AT: www.hittite.com SUMMER 2005
INNOVATIVE, HIGH LINEARITY BROADBAND MIXERS
HMC214MS8 High IP3 SMT Mixer, 2.4 - 4.0 GHz
Features
Input IP3: +34 dBm
LO to RF Isolation: 28 dB
Input P1dB: +22 dBm
No External Components
Ultra Small MSOP8
Available RoHS Compliant
Ideal for WiMAX & Fixed Wireless!The HMC214MS8 is a high dynamic range passive MMIC mixer in an 8 lead plastic SMT package covering 2.4 to 4 GHz. Excellent input IP3 performance of +34 dBm for down-conversion and +31 dBm for up-conversion is provided for WiMAX and other 3.5 GHz Fixed Wireless applications at an LO drive of +17 dBm. With a 1 dB compression of +22 dBm, the RF port will accept a wide range of input signal levels. LO to RF & LO to IF isolations are maintained at 25 to 30 dB.
HMC129LC4 High Isolation Double-Balanced Passive Mixer, 4 - 8 GHz
Features
Conversion Loss: 7 dB
LO to RF & IF Isolation: 40 dB
Input IP3: +17 dBm
+9 to +15 dBm LO Range
RoHS Compliant 4x4 mm SMT Package
Low Conversion Loss!The HMC129LC4 is a double-balanced MMIC mixer housed in a leadless RoHS compliant SMT package which can be used as an upconverter or downconverter in the 4 to 8 GHz band. The HMC129LC4 is ideally suited for applications where small size, no DC bias, and consistent IC performance are required. This mixer can operate over a wide LO drive input of +9 to +15 dBm and wide IF bandwidth of DC - 3 GHz. It performs equally well as a Bi-Phase modulator or demodulator.
HMC260 / 292 / 329LC3B Double-Balanced Mixers Covering 14 to 32 GHz
Features
Input IP3 to +20 dBm
LO/RF Isolation to 40 dB
Wide IF Bandwidth: DC - 8 GHz
Passive: No DC Bias Required
RoHS Compliant 3 x 3 mm SMT Package
No External Matching!The HMC260/292/329LC3B are passive double balanced mixers in leadless RoHS compliant SMT packages that can be used as upconverters or downconverters over 14 to 32 GHz. These mixers require no external components or matching circuitry. They provide excellent LO to RF and LO to IF suppression eliminating LO filtering. The mixers operate with LO drive levels from +9 to +15 dBm and are ideal for Microwave Radio, VSAT, Military & Test Equipment applications.
Conversion Gain vs. Temperature
Input IP3 vs. Temperature
��
��
��
��
��
��
��� ��� ��� ��� � ��� ��� ��� ��� � ���
����������������
���
��
����
����
��
�
������������������
���
���
��
�
� � � � � � �
��������������
������������������
�
���������������
Typical Performance
RF/LOFreq. (GHz)
14 - 26 20 - 30 24 - 32
IF Freq. (GHz) DC - 8 DC - 8 DC - 8
Conv. Gain (dB) -7.5 -8 -10
LO/RF Isol. (dB) 39 38 40
IIP3 (dBm) 20 19 19
HMC26
0LC3B
HMC29
2LC3B
HMC32
9LC3B
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com4
OF
F-T
HE
-SH
ELF
5 VISIT US AT: www.hittite.com SUMMER 2005
NEW PHASE SHIFTER & VCO PRODUCTS!
Features
Pout: +7 to +12 dBm
Phase Noise: -95 to -110dBc/Hz @100 KHz
No External Components
QFN Leadless SMT Packages
Available RoHS Compliant
Applications
VSAT Radio
Pt to Pt/Multi-pt Radios
Test Equipment & Industrial Controls
Military End-Use
HMC247 / 538LP4 / C010 Analog Phase Shifters Covering 6 to 21 GHz
Features
Wide Bandwidth
Continuously Variable
Stable Insertion Loss vs. Phase Shift
Alternative Packaging Options
Applications
Optical Communications
Instrumentation
Laboratory Test Sets
Test Equipment
Military & Space
New Product Line for Test Equipment, Telecom & Military / Space!
The HMC247 is a 9 to 21 GHz Analog Phase Shifter die. Phase shift is controlled via an analog DC voltage control from 0 to +10V, providing continuously variable insertion phase of 0 to 300 degrees at 9 GHz. Insertion loss is 5 dB, and is very consistent versus phase shift. The HMC247 is offered in bare die form and is compatible with standard wirebonding and epoxy and eutectic die attach techniques.
For SMT applications, the HMC538LP4 6 - 16 GHz Analog Phase Shifter is housed in a leadless surface mount QFN 4 x 4 mm package. This variable phase shifter accepts an analog control voltage from 0 to +5V, and provides continuously variable insertion phase from 0 to 800 degrees at 6 GHz, and 0 to 450 degrees at 16 GHz.
For test equipment and instrumentation applications, the HMC-C010 offers the same outstanding performance as the HMC538LP4, and is housed in a flanged module with field replacable SMA connectors.
These phase shifters are particularly useful for adjusting the phase of clocks in fiber optic systems and test equipment.
MMIC VCOs for Microwave, Military and Sensor Applications!
The HMC513LP5, HMC514LP5, HMC533LP4 are fully integrated GaAs InGaP HBT VCOs. These MMIC VCOs incorporate an integrated resonator, negative resistance device, and varactor diode, resulting in excellent phase noise performance over temperature, shock, and process due to the monolithic structure. These VCOs deliver high output power, operate from a single positive supply voltage, and allow the prescaler function to be disabled in order to reduce power consumption.
The HMC533LP4 is a 23.8 - 24.8 GHz MMIC VCO featuring +12 dBm output power, and a divide-by-16 output. The HMC533LP4 is housed in a leadless QFN 4 x 4 mm surface mount package, operates from a +5V supply, and exhibits -95 dBc/Hz SSB Phase Noise at 100 kHz offset.
The HMC513LP5 10.43 - 11.46 GHz MMIC HBT VCO, and the HMC514LP5 11.17 - 12.02 GHz MMIC HBT VCO feature +7 dBm power output, as well as Fo/2 and divide-by-4 divided outputs. Both VCOs are housed in leadless QFN 5 x 5 mm surface mount packages, operate from a single +3V supply, and exhibits -110 dBc/Hz SSB Phase Noise at 100 kHz offset.
HMC513LP5 / 514LP5 / 533LP4 MMIC VCOs Covering Up to 24.8 GHz
Typical Performance
PartNumber
Frequency(GHz)
FunctionInsertionLoss (dB)
PhaseRange (Deg)
2nd HarmonicPin= 0 dBm (dBc)
Control Voltage
Range (Vdc)
HMC538LP4 6 - 16 Analog 8800˚ @ 6 GHz450˚ @ 16 GHz
10 0V to +5V
HMC-C010 6 - 16 Analog 8800˚ @ 6 GHz450˚ @ 16 GHz
10 0V to +5V
HMC247 9 - 21 Analog 5300˚ @ 9 GHz60˚ @ 21 GHz
50 0V to +10V
Typical Performance
PartNumber
Frequency(GHz)
FunctionOutputPower(dBm)
10kHz SSB Phase Noise
(dBc/Hz)
100kHz SSBPhase Noise
(dBc/Hz)
BiasSupply
HMC513LP510.43 - 11.46 /
5.21 - 5.73VCO w/ Fo/2 & ÷4 7 -85 -110 +3V @ 275mA
HMC514LP511.17 - 12.02 /
5.58 - 6.0VCO w/ Fo/2 & ÷4 7 -85 -110 +3V @ 275mA
HMC533LP4 23.8 - 24.8 VCO w/ ÷16 12 -70 -95 +5V @ 220mA
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com6
OF
F-T
HE
-SH
ELF
7 VISIT US AT: www.hittite.com SUMMER 2005
The 23 GHz Microwave Radio block diagram below shows how Hittite SMT components can reduce parts count, shorten design cycles and simplify manufacturing.
Hittite low noise VCOs are widely used to generate the fundamental LO signals for various radio designs. The HMC386LP4 VCO w/ Buffer Amp, the HMC439QS16G Phase/Frequency Detector, and the HMC365S8G Divide-by-4 Prescaler can be combined to quickly construct a 2.6 - 2.8 GHz LO signal with +5 dBm output power and very low phase noise.
Microwave radios frequently employ discrete multiplier chains in the LO distribution section which can be problematic to manufacture with consistency, in addition to the spurious issues that they can create. The HMC443LP4 X4 Active Multiplier can be used to generate a 10.4 to 11.2 GHz LO signal, with +4 dBm output power and better than 25 dBc sub-harmonic suppression.
In the transmit section of the radio, the HMC342LC4 LNA/Driver, and the HMC499LC4 Medium Power Amplifier can be used in cascade to create a driver amplifier or output stage.
The combination of these two GaAs pHEMT amplifiers will produce, +24 dBm output power and 37 dB Gain, while operating from a single +5V supply.
Hittite I/Q and IRM mixers are ideal for receive chain application which require high IP3 and high image rejection. The new HMC523LC4 offers wide IF bandwidth, high input IP3 and excellent RF to LO Isolation. Compared with a hybrid based implementation, this I/Q MMIC mixer offers significantly reduced PCB area, consistent performance, and excellent amplitude and phase balance as a result of its monolithic construction. When configured as an Image Reject Mixer using an external IF hybrid, the HMC523LC4 provides 25 dB of image rejection at midband. Such high levels of image rejection would be difficult if not impossible to achieve on a production basis using mixers, splitters and couplers in a hybrid MIC or PCB based approach, while this mixer acheives such high levels inherently.
All microwave product data sheets are available at www.hittite.com.
APPLICATION SOLUTIONS!
ALL SMT MICROWAVE RADIO DESIGN... (continued from page 1)
LOW NOISE PLO MMIC... (continued from page 1)
The fully integrated HMC535LP4 incorporates a VCO, phase frequency-detector (PFD), fixed modulus prescaler, and loop amplifier. The reference oscillator input and a sample of the divided VCO output are fed to the phase frequency detector and the loop amplifier. In closed loop mode, the integrated phase frequency detector tunes the VCO until phase lock
is achieved. A digital Lock Detect (LD) output is provided to confirm the status of the loop. Compared to discrete PLO approaches, the HMC535LP4 will significantly reduces the component count, and the board space required to produce a low phase noise Local Oscillator signal as required by high symbol rate digital radios.
The HMC535LP4 requires +5V and +12V supply voltages, consumes less than 2W of power and is housed in a 4 x 4 mm SMT leadless QFN package. Both standard (HMC535LP4) and RoHS compliant (HMC535LP4E) versions are available. Sample and production quantities are available from stock and may be ordered on-line.
Custom PLO products can be designed for customers’ application specific requirements. Contact [email protected].
���� ������
����
� ��
���� �
� ��������� ���
���������� ���
������� ���
��������� ���
���� ������
Figure 2. HMC535LP4 PLO Functional Diagram
� �
� �
� �
��������� � ������� �� �� �� � ���� ���������
� ��
���
���
���
HMC517LC4Low Noise Amp• 17 - 26 GHz• 19 dB Gain• 2.5 dB NF
HMC264LC3BSub-Harmonic Mixer
• 21 - 31 GHz RF• 10.5 - 15.5 GHz LO
HMC213MS8DBL-BAL Mixer
• 1.5 - 4.5 GHz RF• DC - 1.5 GHz IF
• Hi-Isolation
HMC342LC4LNA / Driver• 13 - 25 GHz• 22 dB Gain• +10 dBm Pout
HMC499LC4Med. Power Amp• 21 - 32 GHz• +24 dBm P1dB• 15 dB Gain
HMC311ST89SiGe Gain Block
• DC - 6 GHz• 15 dB Gain
• +15 dBm P1dB
HMC365S8GDivide-By-4
• DC - 13 GHz Input• Low Phase Noise
• ÷2, ÷3, ÷5, ÷8 Available
HMC386LP4VCO w/ Buffer Amp
• 2.6 - 2.8 GHz Fo• Low Phase Noise
-115 dBc/Hz @ 100 kHz
HMC443LP4x4 Active Multiplier• 9.8 - 11.2 GHz Fo
• +3 dBm Pout• Very Low Phase Noise
HMC441LC3BMedium PA• 6 - 18 GHz
• 17 dB Gain• +20 dBm P1dB
HMC442LC3BMedium PA
• 17.5 - 25.5 GHz• 13 dB Gain
• +21 dBm P1dB
HMC523LC4I/Q Mixer / IRM
• 15 - 23.6 GHz RF/LO• 25 dB Image Rejection
• +25 dBm Input IP3• DC - 8 GHz IF
HMC331LC3BPassive Freq. Doubler
• 12 - 18 GHz Fin
• 50 dB 1, 3, 4 Fo Isolation
HMC478MP86SiGe Gain Block
• DC - 4 GHz• 22 dB Gain
• +18 dBm P1dB
HMC439QS16GPhase-Freq. Detector
• 10 - 1300 MHz• Low Phase Noise,
-153 dBc/Hz@ 100 kHz
Typical All SMT Microwave Radio Block Diagram
NEW!
OFF
-TH
E-S
HE
LF
SUMMER 2005 VISIT US AT: www.hittite.com6
OF
F-T
HE
-SH
ELF
7 VISIT US AT: www.hittite.com SUMMER 2005
FOR MORE INFORMATION...Hittite Microwave CorporationUSA Corporate Headquarters Phone: 978-250-3343 Fax: 978-250-3373 [email protected]
Hittite Microwave CorporationEastern N. American Sales Office Phone: (610) 998-1470 Fax: (610) 998-1473 [email protected]
Hittite MikrodalgaSanayi ve Ticaret Ltd. Sti [email protected]
Hittite Microwave Europe Limited Phone: +44 1256-817000 Fax: +44 1256-817111 [email protected]
Hittite Microwave Deutschland GmbH Phone: +49 8031-97654 Fax: +49 8031-98883 [email protected]
Hittite Microwave Asia Co., Limited Phone: (82-2) 559-0638 Fax: (82-2) 559-0639 [email protected]
Hittite Microwave Co., LimitedShangHai Office Phone: (86-21) 62376717 Fax: (86-21) 62376716 [email protected]
Beijing Office Phone: (86-10) 87756717 Fax: (86-10) 87756899 [email protected]
Shenzhen Office Phone: (86) 755-8350-5422 Fax: (86) 755-8350-5258 [email protected]
NORTH AMERICACANADA; Ottawa & Montreal: Repwave-Scientech +613-270-9811
Toronto: Repwave-Scientech +905-465-1584
USA North East & Mid-Atlantic;
CT, MA, ME, NH, RI & VT: dBm Technical Sales 978-256-7100
So. CT, Metro NY/LI & No. NJ: Comp Tech 201-288-7400
E. PA, So. NJ & Upstate NY: Brooks Associates 732-873-1900
DC, DE, MD, VA & WV: Vincent Pirro Electronics 410-489-9554
USA Mid-West;
IA, MN & E. OH: DyTec, Inc. 800-872-5746
IN, KS, KY, MI, MO, NE W. OH, So. IL & WI: HMC East 610-998-1470
No. IL: TK Technologies Inc. 847-991-7160
USA South East;
FL: Spartech South 321-727-8045
GA, NC, SC, TN, AL & MS: HMC East 610-998-1470
USA South West;
TX, OK, LA & AR: N & W Sales, Inc. 817-461-4443
AZ & NM: Saguaro Technical Sales, Inc. 480-947-3724
USA West;
No. CA & NV: Custom & Wireless Sales 408-371-0222
So. CA: Acetec 858-784-0900
OR & WA: Sea-Port Technical Sales 425-702-8300
CO & UT: W. Howard Associates, Inc. 303-766-5755
EUROPE, MID-EAST & AFRICABenelux: Datron BV +31-35-6246649
Czech Republic,Poland & Slovak Republic: Hittite Microwave Europe Limited +44 1256-817000
Finland: Hittite Microwave Europe Limited +44 1256-817000
France: Salies SA +33-1-69-02-2570
Germany, Austria, & Switzerland: Hittite Microwave Deutschland GmbH +49 8031-97654
Germany, Austria, Denmark & Switzerland: MRC Components OHG +49 8161-9848-0
Israel: Starlight Technologies, Inc. +972-3-9410555
Italy: Special-Ind SPA +39-02-6074741
Norway: Bredengen AS +47-2100-9100
Spain & Portugal: Altaix Electronica S.A.L +34-91-636-39-39Sweden: Amtele AB +46-8-556-466-00
South Africa: RF Design Laboratory CC +27-21-762-5365
United Kingdom & Ireland: Link Microtek Ltd +44 1256-355-771
ASIA & SOUTH PACIFICAustralia: ASD Technology Pty Ltd +61-2-9884-7486
China & Hong Kong: Secom Telecom Co., LTD. +86-755-25155888
Wai Tat Electronics Ltd. +852-2799-7393
India: Syratron +91-80-5591107/5531031
Indonesia, Malaysia,Philippines & Singapore MEDs Technologies, Pte., Ltd. +65-6453-8313
Japan: Saint Technology +81-3-5330-6411
Seki Technotron Corp. +81-33820-1711 +81-6-6386-1232
Korea: ENS Engineering +82-2-562-9819
New Zealand: ASD Technology Pty Ltd +61-2-9884-7486
Taiwan R.O.C.: Bandtek International Co., Ltd. +886-2-2657-2615
NORTH AMERICA DISTRIBUTION:Future Electronics800-Future-1Ext. 2754, Americaswww.FutureElectronics.com/rf
NEWS FROM HITTITE!
HITTITE ADDS NEW
MANUFACTURERS REPRESENTATIVES
Comp-Tech Sales to Cover Metro NY/NJComp-Tech Sales, headquartered in New Jersey represents a broad line of electronic components with an emphasis on RF/Microwave devices. Their office in Hasbrouck Heights, NJ offers full support to customers in Metro New York, Long Island, Northern New Jersey & Connecticut (Fairfield county). Comp-Tech Sales can be contacted via telephone at 201-288-7400, via fax at 201-288-7583 or email at [email protected]. Visit their website at www.comp-techsales.com.
Brooks Associates to Cover So. NJ, PA & No. NYBrooks Associates specializes in RF/Microwave sales to the military, space and consumer electronics industries. Their offices in New Jersey and Pennsylvania offer full support to customers in the Southern New Jersey, upstate New York and eastern Pennsylvania. Brooks can be contacted via telephone at 732-873-1900, via fax at (732)-873-9009 or email at [email protected].
Sea-Port Technical Sales to Cover WA & ORSea-Port Technical Sales established in 1989, offers a suite of high end RF, Microwave, and Fiber Optic products. Headquartered in Bellevue, Washington, Sea-Port offers full support to Oregon and Washington state. Sea-Port can be contacted via telephone at 425-702-8300, via fax at 425-702-8388 or email at [email protected]. Visit their website at www.seaporttech.com.
NEW SUMMER 2005SELECTION GUIDE RELEASED!HMC is pleased to announce the availability of the Sum-mer 2005 Product Selection Guide which summarizes over 340 products. The se-lection guide features include organization by product line as well as by market applica-tions including: Automotive, Broadband, Cellular/PCS/3G, Fiber Optic, Microwave & mmWave Communica-tions, Test & Measurement, Military and Space.
This new Selection Guide contains over 52 products not found in the Autumn 2004 Selection Guide and 22 prod-ucts not found in the 2005 Designer’s Guide Catalog.
Request your copy of the new Summer 2005 Selection Guide at www.hittite.com by selecting the “SUBMIT IN-QUIRY” left hand navigation button. New product data sheets can be found on-line.
© 2005, Hittite Microwave Corporation, All Rights Reserved.20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Boston • Istanbul • London • Munich • Seoul • Shanghai
SUMMER
2005
What We Do
Hittite Microwave Corporation is an innovative designer and manufacturer of analog and mixed-signal ICs, MIC modules and sub-assemblies for RF, microwave and millimeter-wave applications covering DC to 110 GHz. Our RFIC/MMIC products are developed using state-of-the-art GaAs, InGaP/GaAs, InP, SOI and SiGe semiconductor processes utilizing MESFET, pHEMT, mHEMT and HBT devices. Our products include;
Power Amplifiers Attenuators Mixers VCOs Gain Blocks Phase Shifters Converters Dividers/Detectors Driver Amplifiers Switches IRMs Multipliers LNAs Transceivers Modulators PLOs / PLLs
We also design and supply highly integrated custom ICs, MCMs and sub-systems that combine multiple functions for specific requirements. We select the most appropriate semiconductor and package technologies, uniquely balancing digital and RF integration techniques, to produce a product that is easy and cost effective for our customers to use.
Our custom and standard products support a wide range of wireless / wired communica-tions and radar applications including those listed below:
Automotive Telematics & Sensors
Broadband CATV, DBS, WiMAX, WLAN, Fixed Wireless & UWB
Cellular / PCS / 3G Handset / Handheld, PLMR & Infrastructure
Fiber Optic OC-48 to OC-192
Microwave / mmWave Communications Pt to Pt / Multi-Pt Radios & VSAT
Test & Measurement Commercial / Industrial Sensors & Test Equipment
Military C3I, ECM & EW
Space Payload Electronics
Every component is backed by Hittite Microwave’s commitment to total quality. HMC is ISO 9001:2000 certified, and every Hittite employee and subcontractor is responsible for maintaining the highest level of quality. We are constantly working towards im-provement of our procedures and processes, thus providing our customers with products that meet or exceed all requirements, are delivered on-time and function reliably throughout their useful life.