Summary Datasheet AT-1008 Network Performance Element · 2016-10-04 · Summary Datasheet Summary...

3
Summary Datasheet Summary Datasheet • AT-1008 • 4Q 2016 Designed to meet requirements of carrier-grade Ethernet services, AT-1008 is an eight-port, highly resilient network interface device that delivers unparalleled timing/synchronization accuracy, and low-cost, easy operation. AT-1008 is a compact Carrier Ethernet 2.0 service demarcation device well-suited for both business Ethernet and mobile backhaul solutions. A temperature-hardened construction makes these Elements very durable and suitable for the most demanding environments, including high-salinity coastal and industrial installations. These versatile 8-port Performance Elements support: four 10 GB/s or 1 Gb/s and four 1 Gb/s interfaces as well as a variety of common resiliency methods and support all major synchronization standards. Cost-effective and easy-to-deploy, AT-1008 units are an excellent choice for all Carrier Ethernet applications. Key Applications Mobile backhaul and Business services and data center connectivity strategies are supported with the Accedian AT series, with integrated, standards-based Ethernet OAM and SLA performance monitoring. MEF Carrier Ethernet functionality combined with layer-2 and 3 traffic conditioning allow this low-cost element to support price-sensitive commercial offerings without compromise. The wide range of integrated synchronization standards—powered by dedicated hardware— allows the AT to meet the demanding timing requirements of LTE and LTE-Advanced (LTE- A) backhaul networks while seamlessly supporting OAM, aggregation and other critical access networking requirements. The Ethernet OAM feature suite built into AT series units provides link, service, network monitoring, and performance metrics. Embedded hardware-based testing methods enable remote diagnostics and testing, effectively reducing truck-roll costs while assuring best possible quality of experience (QoE) to the end customer. Resilient Sub-50 ms failover switching Standards-based Ethernet ring Link aggregation support Reliable & Efficient Low power consumption Versatile Timing & Sync 1588v2 Boundary Clock and Transparent Clock, SyncE, NTP Integrated Performance Assurance Service Activation Testing (RFC 2544 & Y.1564) Ethernet Service OAM Y.1731 Performance Monitoring Benefits AT-1008 Network Performance Element

Transcript of Summary Datasheet AT-1008 Network Performance Element · 2016-10-04 · Summary Datasheet Summary...

Page 1: Summary Datasheet AT-1008 Network Performance Element · 2016-10-04 · Summary Datasheet Summary Datasheet • AT-1008 • 4Q 2016 Designed to meet requirements of carrier-grade

Summary Datasheet

Summary Datasheet • AT-1008 • 4Q 2016

Designed to meet requirements of carrier-grade Ethernet services, AT-1008 is an eight-port, highly resilient network interface device that delivers unparalleled timing/synchronization accuracy, and low-cost, easy operation.

AT-1008 is a compact Carrier Ethernet 2.0 service demarcation device well-suited for both business Ethernet and mobile backhaul solutions. A temperature-hardened construction makes these Elements very durable and suitable for the most demanding environments, including high-salinity coastal and industrial installations.

These versatile 8-port Performance Elements support: four 10 GB/s or 1 Gb/s and four 1 Gb/s interfaces as well as a variety of common resiliency methods and support all major synchronization standards. Cost-effective and easy-to-deploy, AT-1008 units are an excellent choice for all Carrier Ethernet applications.

Key Applications Mobile backhaul and Business services and data center connectivity strategies are supported with the Accedian AT series, with integrated, standards-based Ethernet OAM and SLA performance monitoring. MEF Carrier Ethernet functionality combined with layer-2 and 3 traffic conditioning allow this low-cost element to support price-sensitive commercial offerings without compromise.

The wide range of integrated synchronization standards—powered by dedicated hardware—allows the AT to meet the demanding timing requirements of LTE and LTE-Advanced (LTE-A) backhaul networks while seamlessly supporting OAM, aggregation and other critical access networking requirements.

The Ethernet OAM feature suite built into AT series units provides link, service, network monitoring, and performance metrics. Embedded hardware-based testing methods enable remote diagnostics and testing, effectively reducing truck-roll costs while assuring best possible quality of experience (QoE) to the end customer.

Resilient • Sub-50 ms failover switching

• Standards-based Ethernet ring

• Link aggregation support

Reliable & Efficient

Low power consumption

Versatile Timing & Sync • 1588v2 Boundary Clock and

Transparent Clock, SyncE, NTP

Integrated Performance Assurance • Service Activation Testing

(RFC 2544 & Y.1564)

• Ethernet Service OAM

• Y.1731 Performance Monitoring

Benefits

AT-1008

Network Performance Element

Page 2: Summary Datasheet AT-1008 Network Performance Element · 2016-10-04 · Summary Datasheet Summary Datasheet • AT-1008 • 4Q 2016 Designed to meet requirements of carrier-grade

Summary Datasheet • AT-1008 • 4Q 2016

• Multicast VLAN Registration (MVR) and profile

• Broadcast/Multicast Storm Control • Unknown Multicast Filtering • Well-known Protocol Forwarding

Security • Network Access Server

• Port-based IEEE 802.1X • Single and Multiple IEEE

802.1X • MAC-based Authentication • VLAN and QoS Assignment • Guest VLAN

• RADIUS • TACACS+ • Web and CLI Authentication • Authorization (15 user levels) • ACLs for Filtering, Policing, and

Port Copy • IP Source Guard • IP MAC Binding • IP MAC Binding Dynamic to Static

Management • Web Access through HTTP and

HTTPS • CLI –Console Port, Telnet and

SSHv2 • Management Access Filtering • IPv6 Management • System Syslog • Software Upgrade • SNMP v1, v2c, v3 • RMON Group 1, 2, 3, and 9 • IEEE 802.1AB LLDP • TIA 1057 LLDP-MED • Cisco Discovery Filtering, CDP • sFlow • Loop Detection Restore to Default • DNS Client, Proxy • DHCP Server and DHCP Client • Standard CLI and configuration • Flat file configuration import/export • Multiple SNMP Trap Destinations

Port Control • Port Speed, Duplex Mode, Flow

Control • Port Frame Size (Jumbo Frames) • Port State (Administrative Status) • Port Status (Linking Monitoring) • Port Statistics (MIB Counters) • Cable Diagnostics • On-the-Fly SFP Detection

Ethernet Layer 2 Switching • IEEE 802.1D Bridge • IEEE 802.1Q VLAN • VLAN Translation • Private Static VLAN • Port Isolation (static) • MAC-based and Protocol-based

VLAN • Multiple Registration Protocol

(MRP) • Multiple VLAN Registration

Protocol (MVRP) • GARP VLAN Registration

(GVRP) • IEEE 802.1ad Provider Bridge

(Native or Translated VLAN) • IEEE 802.1w Rapid Spanning

Tree Protocol (RSTP) • IEEE 802.1s Multiple Spanning

Tree Protocol (MSTP) • Loop Guard • Bridge Protocol Data Unit (BPDU)

• Guard and Restricted Role • Transparency and Forwarding

• Voice VLAN & Auto VoIP • VLAN Trunking • DHCP Snooping • ARP Inspection • Port and Flow Mirroring • Protocol-based and IP subnet-

based VLAN • Error Disable Recovery • Classification of Layer-3 Flow

Advanced Layer 3 Features • DHCP Option 82 Relay • Universal Plug and Play (UPnP) • IPv4 Unicast Static Routing

Multicast Management • IGMPv2 and IGMPv3 Snooping • MLDv1 and MLDv2 Snooping • IP Multicast (IPMC) Throttling,

Filtering, Fast Leave and Leave Proxy

Carrier Ethernet Services • E-LINE, E-LAN, E-TREE

Ethernet Virtual Connections (EVCs)

• Provider Bridging and MPLS-TP Network (Future)

• MEF-Compliant Dual-Rate Policing

• Traffic Shaping

Carrier Ethernet OAM • IEEE 802.1ag Connection Fault

Management (CFM) • IEEE 802.3ah Ethernet in the

First Mile (EFM) • IETF RFC 2544 Performance

Benchmarking Test • ITU-T Y.1564 Service Activation

Test • ITU-T Y.1731 Performance

Monitoring

Timing and Synchronization • IEEE 1588v2 Precision Time

Protocol (PTP) with One-/Two-Step Clock • Peer-to-Peer and End-to-End-

Transparent Clock • Boundary Clock • Redundant Masters and

Multiple Timing Domains • IETF RFC 5905 NTPv4 Client • ITU-T G.8262 Synchronous

Ethernet with SSM

Protection • IEEE 802.3ad Link Aggregation

Control Protocol (LACP) • ITU-T G.8031 Ethernet Linear

Protection Switching (ELPS) • ITU-T G.8032 v1/v2 Ethernet

Ring Protection Switching (ERPS)

• IEEE 802.3ad Link Aggregation; Static & LACP

Quality of Service • Per-EVC QoS, Policing and

Shaping for Service Isolation and Traffic Engineering

• Strict Priority and Deficit Weighted Round-Robin (DWRR) Scheduling

• Per-Port/VLAN/ToS/DSCP Classification

• Per-Port/VLAN/Flow Rate Limiting

Features Summary

Page 3: Summary Datasheet AT-1008 Network Performance Element · 2016-10-04 · Summary Datasheet Summary Datasheet • AT-1008 • 4Q 2016 Designed to meet requirements of carrier-grade

Summary Datasheet • AT-1008 • 4Q 2016

Model Copper

Interfaces (RJ-45)

Optical Interfaces

(SFP) Temperature

Hardened GPS SyncE Part Number

AT-1008 H DC (note 1) 4 4 (2) • 7B0-120 AT-1008 H AC (note 1) 4 4 (2) • 7B0-140 AT-1008 YH DC 4 4 (2) • • 7B0-520 AT-1008 YH AC 4 4 (2) • • 7B0-540 AT-1008 H DC (note 1) 0 8 (2) • 7B1-120 AT-1008 H AC (note 1) 0 8 (2) • 7B1-140 AT-1008 YH DC 0 8 (2) • • 7B1-520 AT-108 YH AC 0 8 (2) • • 7B1-540

Description Part Number

19” Rackmount 1U Horizontal Mounting Bracket, Fits 1 AT-1008 Unit 705-060 23” Rackmount 1U Horizontal Mounting Bracket, Fits 1 AT-1008 Unit 705-061 Recessed 19” Rackmount 1U Horizontal Mount Bracket, Fits 1 AT-1008 Unit 705-070 Recessed 23” Rackmount 1U Horizontal Mount Bracket, Fits 1 AT-1008 Unit 705-071 DC A/B Power Connection Terminal Block Adapter 720-009 DC A/B Cable (10 feet) 720-00S AC/DC Power Supply Adapter with C6 Connector (No Power Cord) 720-0PR AC Power Cord (North America) 721-020 AC Power Cord (Europe/Russia) 721-021 AC Power Cord (UK) 721-022 AC Power Cord (Japan) 721-023 AC Power Cord (Australia/New Zealand) 721-026

IEC 60950-1 / UL 60950-1 / CSA C22.2 No 60950-1

FCC Part 15 Class A, Industry Canada ICES-003, VCCI – Class A

CE Marking and RoHS Compliant NEBS

Specifications Models

*Notes: (1) Available Day 1 (2) 4 ports SFP/SFP+

Power Options and Accessories

© 2016 Accedian Networks Inc. All rights reserved.

Accedian Networks, the Accedian Networks logo, SkyLIGHT, SkyLIGHT Director, , SkyLIGHT Director Vision Module, FlowBROKER, Nano, ant , Vision EMS, Vision Suite, VisionMETRIX, Vision Collect, Vision Flow, Vision SP, V-NID, Plug & Go, R-FLO, Network State+, Traffic-Meter, FlowMETER & airMODULE are trademarks or registered trademarks of Accedian Networks Inc.