SuggestedRetail PRICE LIST APRIL 1, 2010 Price list IW.pdf · 21/32, 23/32, 25/32, 27/32, 29/32,...
38
HYDRAULIC IRONWORKERS Suggested Retail PRICE LIST APRIL 1, 2010 Rev. #3 Prices And Specifications Are Subject To Change Without Notice. All Prices Are F.O.B. Philip, South Dakota. Minimum Order $ 25.00 (Net) SCOTCHMAN INDUSTRIES, INC. P.O. BOX 850 PHILIP, SOUTH DAKOTA 57567-0850 U.S.A. Web Site: www.scotchman.com E-Mail: [email protected] ¬ SPECIAL NOTICE ¬ Base Price Of All Ironworkers Includes An Angle Shear. PHONE: 1-800-843-8844 or 1-605-859-2542 FAX: 1-800-843-5545 or 1-605-859-2499
Transcript of SuggestedRetail PRICE LIST APRIL 1, 2010 Price list IW.pdf · 21/32, 23/32, 25/32, 27/32, 29/32,...
HYDRAULIC IRONWORKERSSuggested Retail
PRICE LIST
APRIL 1, 2010Rev. #3
Prices And Specifications Are Subject To Change Without Notice.
All Prices Are F.O.B. Philip, South Dakota.
Minimum Order $ 25.00 (Net)
SCOTCHMAN INDUSTRIES, INC.
P.O. BOX 850
PHILIP, SOUTH DAKOTA 57567-0850 U.S.A.
Web Site: www.scotchman.com
E-Mail: [email protected]
¬ SPECIAL NOTICE ¬
Base Price Of All Ironworkers Includes An Angle Shear.
PHONE: 1-800-843-8844 or 1-605-859-2542
FAX: 1-800-843-5545 or 1-605-859-2499
MODEL PORTA-FAB 45 $5,690.0045 TON PUNCH CAPACITY - PORTABLE - 110 VOLT
— STANDARD EQUIPMENT INCLUDES:
45 Ton Punch Station (1-1/8" in 1/2"), Keyed Punch Ram, 4-1/4" Throat Depth, 2" Die Holder, Jam Nut
w/Wrench & Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Electric Stroke Con-
trol w/Scale, 3 In 1 Combination Tool (Includes Angle Shear - 3" x 3" x 5/16", 6" Flat Bar Shear - 3/8" x 6" &
3/4" Rod Shear), Tool Table Work Area, Machine Stand w/Punch & Die & Tooling Storage Rack, 110 Volt
Electrics, All Guards Comply w/ANSI B 11-5 Standards, Three Year Warranty.
110 VOLT - DESIGNED FOR IN-HOUSE FABRICATING OR CAN BE TAKEN TO JOB LOCATION
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
PORTA-FAB (Less 3 in 1 Tool) $5,225.00
220 Volt 1 Phase 012303 $ 600.00
WORK LIGHT (110 VOLT) 090385 $ 95.00
PUNCH SLUG RECEPTACLE 012380 $ 80.00
6" BRAKE W/4-Way Lower V Die 001176 $ 295.00
8" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433003 $1,075.00
12" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433000 $1,250.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
BRAKE LENGTH GAUGE W/Scale & Squaring Arm 026800 $ 145.00
OPEN END BRAKE (Maximum ¼” x 3” Flat or Angle Iron) 001360-001365 $1,625.00
OPTIONAL BRAKE DIES AVAILABLE Call For Price & Delivery.
PIPE NOTCHER HOUSING
(Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
TOOL TABLE PUSHER For Pipe Notcher 012450 $ 50.00
RECTANGLE NOTCHER 2" x 1-3/4" x 1/4" 440000 $ 590.00
90 DEGREE V NOTCHER 6" x 6" x 1/8" or 3" x 3" x 1/4" 540160 $1,590.00
ROD SHEAR ( Up to 1" Round or 3/4" Square) 017400 $1,125.00
SQUARE TUBE SHEAR-Square (1/2" to 1" 14 Ga. Max.) 001350-016540 $1,095.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-001172-001175 $ 750.00
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
PAGE 2
2-5/8 DIE HOLDER 000687 $ 185.00
2-5/8 DIE HOLDER PUNCH TABLE 400727 $ 80.00
3 IN 1 COMBINATION TOOL (When ordered separately) 012351 $1,295.00
MATERIAL STOP for 3 IN 1 TOOL 076930 $ 95.00
ANGLE SHEAR (3" x 3" x 5/16") (When ordered separately) 430025 $1,125.00
ECONOMY FABRICATING PACKAGES:
#2505 INCLUDES: #20 Round Punch & Die Package 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
7/8, 15/16 & 1".
RETAIL PRICE: $390.00 SAVINGS: $90.00 PACKAGE PRICE: $300.00
#2507 INCLUDES: Deluxe #20 Punch & Die Package Rounds 9/32, 11/32, 13/32, 15/32, 17/32, 19/32,
21/32, 23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32, 1-1/8 & 1-1/4 Squares 3/8, 1/2, 5/8 & 3/4 Ovals 5/16 x
3/4, 7/16 x 3/4, 9/16 x 3/4, 5/16 x 1,7/16 x 1, 9/16 x 1, 5/16 x 1-1/4, 7/16 x 1-1/4 & 9/16 x 1-1/4.
RETAIL PRICE: $1,327.00 SAVINGS: $402.00 PACKAGE PRICE: $925.00
#2515 INCLUDES: 8" Brake, Brake Length Gauge w/Scale & Squaring Arm, Work Light (110 Volt) &
Two Punch Slug Receptacles.
RETAIL PRICE: $1,395.00 SAVINGS: $345.00 PACKAGE PRICE: $1,050.00
#2517 INCLUDES: 12" Brake, 12” Brake Table w/Scale & Squaring Arm, Brake Length Gauge w/Scale
& Squaring Arm, Work Light (110 Volt) & Two Punch Slug Receptacles.
RETAIL PRICE: $1,895.00 SAVINGS: $520.00 PACKAGE PRICE: $1,375.00
#2300 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe
Upper & Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies & Tool Table Pusher For Pipe
Notcher.
RETAIL PRICE: $1,440.00 SAVINGS: $295.00 PACKAGE PRICE: $1,145.00
PAGE 3
MODEL 50514-CM $8,190.0050 TON PUNCH CAPACITY - 6" THROAT - 14" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
50 Ton Punch Station (13/16" in 3/4"), Keyed Punch Ram, 6" Throat Depth, 2" Die Holder, Punch Nut
w/Wrench & Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Stroke Control, 4"
Angle Shear - 4" x 4" x 3/8", 14" Flat Bar Shear w/4-Way Reversible Blade - 3/4" x 4", 1/4" x 14", Rectangle
Notcher - 2-1/2” x 3” x 5/16” or 2-1/2” x 2-3/4” x 3/8”, Tool Table Work Area, Electrical Box w/Emergency
Palm Button & Lock-out Tag-out, 230 Or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5
Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
50514-CM (Less Angle Shear) $7,690.00
Optional UL Approval 005710 $ 125.00
SINGLE PHASE MOTOR, 5 Hp 220 Volt/60 Hz 311005 $ 345.00
WORK LIGHT (110 Volt) 090397.1 $ 95.00
WORK LIGHT (110 Volt) (Factory Installation) 090397 $ 95.00
LASER LIGHT For Bar Shear 033230 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033234 $ 750.00
TOOL TABLE EXTENSION 033216 $ 325.00
PUNCH GAUGING TABLE W/Fence & Scale 400730 $ 225.00
40"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029391 $ 720.00
Includes three vertical stop blocks material thickness 16 gauge to 3/4"
40"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029389 $ 720.00
Includes three vertical stop blocks material thickness 16 gauge to 3/4"
90"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029392 $1,050.00
Includes six vertical stop blocks material thickness 16 gauge to 3/4"
90"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029393 $1,050.00
Includes six vertical stop blocks material thickness 16 gauge to 3/4"
SHEAR TABLE W/Miter Fence 510045 $ 325.00
48" DELUXE BACK GAUGE 025603 $ 575.00
PUNCH SLUG RECEPTACLE 510062 $ 110.00
INFEED CONVEYOR (14" x 5' w/Support Arms) 026985 $1,950.00
6" BRAKE W/4-Way Lower V Die 540076 $ 345.00
8" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433003 $1,075.00
12" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433000 $1,250.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
OPEN END BRAKE (Maximum ¼” x 3” Flat or Angle Iron) 001360-001365 $1,625.00
OPTIONAL BRAKE DIES AVAILABLE Call For Price & Delivery.
PIPE NOTCHER HOUSING
(Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
PAGE 4
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
TOOL TABLE PUSHER For Pipe Notcher 012450 $ 50.00
PUNCH PUSHER 540100 $ 95.00
90 DEGREE V NOTCHER 6" x 6" x 1/8" or 3" x 3" x 1/4" 540160 $1,590.00
ROD SHEAR ( Up to 1" Round or 3/4" Square) 017400 $1,125.00
SQUARE TUBE SHEAR (1/2" to 1" 14 Gauge Max.) 001350-016540 $1,095.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-001172-001175 $ 750.00
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
2-5/8 DIE HOLDER 000687 $ 185.00
2-5/8 DIE HOLDER PUNCH TABLE 400727 $ 80.00
4 x 6 DIE HOLDER 500093 $ 225.00
ANGLE SHEAR 4" x 4" x 3/8" (When Ordered Separately) 343425 $ 890.00
ANGLE IRON MITER GUIDE (45 & 22 Degrees) 343442 $ 49.95
ECONOMY FABRICATING PACKAGES:
#2505 INCLUDES: #20 Round Punch & Die Package 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
7/8, 15/16 & 1".
RETAIL PRICE: $390.00 SAVINGS: $90.00 PACKAGE PRICE: $300.00
#2507 INCLUDES: Deluxe #20 Punch & Die Package Rounds 9/32, 11/32, 13/32, 15/32, 17/32, 19/32,
21/32, 23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32, 1-1/8 & 1-1/4 Squares 3/8, 1/2, 5/8 & 3/4 Ovals 5/16 x 3/4,
7/16 x 3/4, 9/16 x 3/4, 5/16 x 1, 7/16 x 1, 9/16 x 1, 5/16 x 1-1/4, 7/16 x 1-1/4 & 9/16 x 1-1/4.
RETAIL PRICE: $1,327.00 SAVINGS: $402.00 PACKAGE PRICE: $925.00
#2320 8” BRAKE PACKAGE INCLUDES: 8” Brake & Brake Length Gauge w/Scale.
RETAIL PRICE: $1,220.00 SAVINGS: $225.00 PACKAGE PRICE: $995.00
#2321 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,720.00 SAVINGS: $325.00 PACKAGE PRICE: $1,395.00
#2301 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Tool Table Pusher For Pipe Notcher & Punch
Pusher.
RETAIL PRICE: $1,535.00 SAVINGS: $340.00 PACKAGE PRICE: $1,195.00
#2340 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (14” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (110 Volt), Punch Gauging Table w/Fence & Scale, Punch Slug
Receptacle, 48” Deluxe Back Gauge & Shear Table w/Miter Fence.
RETAIL PRICE: $4,000.00 SAVINGS: $1,005.00 PACKAGE PRICE: $2,995.00
PAGE 5
MODEL 5014-TM $11,390.0050 TON 3-STATION TURRET - 4" THROAT - 14" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
50 Ton Punch Station w/3-Station Revolving Turret (1-1/4" in 1/2"), Keyed Punch Ram, 4" Throat Depth,
2" Die Holder, Punch Nuts w/Wrench & Strippers, One Round Punch & Die: Maximum Diameter 1", Ad-
justable Stroke Control, Angle Shear - 4" x 4" x 3/8", 14" Flat Bar Shear w/4-Way Reversible Blade (3/4" x
4", 1/4" x 14", Rectangle Notcher - 2-1/2" x 3" x 5/16"or 2-1/2" x 2-3/4" x 3/8", Tool Table Work Area, Elec-
trical Box w/Emergency Palm Button & Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards
Comply w/ANSI B 11-5 Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
5014TM (Less Angle Shear) $10,890.00
Optional UL Approval 005710 $ 125.00
SINGLE PHASE MOTOR, 5 Hp 220 Volt/60 Hz 311005 $ 345.00
WORK LIGHT (110 Volt) 090398.1 $ 95.00
WORK LIGHT (110 Volt) (Factory Installation) 090398 $ 95.00
LASER LIGHT For Bar Shear 033240 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033244 $ 750.00
TOOL TABLE EXTENSION 033216 $ 325.00
PUNCH GAUGING TABLE W/Fence & Scale 330050 $ 495.00
SHEAR TABLE W/Miter Fence 510045 $ 325.00
NOTCHER SLUG RECEPTACLE 341150 $ 80.00
48" DELUXE BACK GAUGE 025603 $ 575.00
INFEED CONVEYOR (14" x 5' W/Support Arms) 026985 $ 1,950.00
6" BRAKE W/4-Way Lower V Die 001176 $ 295.00
8" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433003 $ 1,075.00
12" BRAKE W/2" V Opening Dies Std. for 1/4" Material 433000 $ 1,250.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
OPEN END BRAKE (Maximum ¼” x 3” Flat or Angle Iron) 001360-001365 $1,625.00
OPTIONAL BRAKE DIES AVAILABLE Call For Price & Delivery.
PIPE NOTCHER HOUSING
(Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
TOOL TABLE PUSHER For Pipe Notcher 012450 $ 50.00
PAGE 6
90 DEGREE V NOTCHER (6 x 6 x 1/8 or 3 x 3 x 1/4) 540160 $ 1,590.00
SQUARE TUBE SHEAR (1/4" to 1" 14 Ga. Max.) 001350-016540 $1,095.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-001172-001175 $ 750.00
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
2-5/8 DIE HOLDER 000687 $ 185.00
2-5/8 DIE HOLDER PUNCH TABLE 400727 $ 80.00
ROD SHEAR (Up to 1" Round or 3/4" Square) 017400 $1,125.00
ANGLE SHEAR (4" x 4" x 3/8") (When Ordered Separately) 343425 $ 890.00
ANGLE IRON MITER GUIDE (45 & 22 Degrees) 343442 $ 49.95
ECONOMY FABRICATING PACKAGES:
#2505 INCLUDES: #20 Round Punch & Die Package 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
7/8, 15/16 & 1".
RETAIL PRICE: $390.00 SAVINGS: $90.00 PACKAGE PRICE: $300.00
#2507 INCLUDES: Deluxe #20 Punch & Die Package Rounds 9/32, 11/32, 13/32, 15/32, 17/32, 19/32,
21/32, 23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32, 1-1/8 & 1-1/4 Squares 3/8, 1/2, 5/8 & 3/4 Ovals 5/16 x 3/4,
7/16 x 3/4, 9/16 x 3/4, 5/16 x 1, 7/16 x 1, 9/16 x 1, 5/16 x 1-1/4, 7/16 x 1-1/4 & 9/16 x 1-1/4.
RETAIL PRICE: $1,327.00 SAVINGS: $402.00 PACKAGE PRICE: $925.00
#2320 8” BRAKE PACKAGE INCLUDES: 8” Brake & Brake Length Gauge w/Scale.
RETAIL PRICE: $1,220.00 SAVINGS: $225.00 PACKAGE PRICE: $995.00
#2321 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,720.00 SAVINGS: $325.00 PACKAGE PRICE: $1,395.00
#2302 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe
Upper & Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies & Tool Table Pusher For Pipe
Notcher.
RETAIL PRICE: $1,440.00 SAVINGS: $295.00 PACKAGE PRICE: $1,145.00
#2341 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (14” x 5’ w/Support Arms),
Laser Light For Bar Shear, Work Light (110 Volt), Punch Gauging Table w/Fence & Scale, Notcher
Slug Receptacle, 48” Deluxe Back Gauge & Shear Table w/Miter Fence.
RETAIL PRICE: $4,270.00 SAVINGS: $875.00 PACKAGE PRICE: $3,395.00
PAGE 7
MODEL 6509-24M $17,390.0065 TON PUNCH CAPACITY - 9" THROAT - 24" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
65 Ton Punch Station (1-1/16" in 3/4"), Keyed Punch Ram, 9" Throat Depth, Punch Gauging Table w/Fence & Scale,
Die Holder With 2" Insert, Punch Nut w/Wrench & Stripper, One Round Punch & Die: Maximum Diameter 1-1/4",
Electric Remote Foot Pedal, Punch Jog Control, Stroke Control w/Scale, Angle Shear - 6 x 6 x 3/8", 5 x 5 x 1/2", 24" Flat
Bar Shear w/4-Way Reversible Blade - 1" x 6", 1/4" x 24",Shear Table w/Miter Fence, Tool Table Work Area, Two
Stage Hydraulic Pump, Electrical Box w/Emergency Palm Button & Lock-out Tag-out, 230 or 440 Volt/3 Phase Elec-
trics, All Guards Comply w/ANSI B 11-5 Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
6509-24M (Less Angle Shear) $16,650.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 5 Hp 220 Volt/60 Hz 006915 $ 345.00
WORK LIGHT (Factory Installation) 090392 $ 210.00
WORK LIGHT (When ordered separate--includes transformer) 090395 $ 410.00
LASER LIGHT For Bar Shear 033250 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033254 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
PUNCH SLUG RECEPTACLE 341150 $ 80.00
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE 026600 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-for 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening Dies Std.-for 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001385 $ 1,625.00
OPTIONAL BRAKE DIES AVAILABLE 1" to 4" V Openings Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PAGE 8
PUNCH PUSHER For Pipe Notcher 001205 $ 120.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
RECTANGLE NOTCHER 2 x 2-1/2 x 3/8" 026000 $1,775.00
90 DEGREE V NOTCHER 6 x 6 x 5/16" 016600 $1,725.00
CHANNEL SHEAR (2"to 6"Adjustable) (Maximum 5" Std. Channel) 026372-016575 $3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-026247 $1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016590 $1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-016550 $ 750.00
* Mounts In The Punch Station Only
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32 to 1-9/16) 016096 $ 45.00
HEAVY DUTY RETAINING NUT 026500 $ 265.00
(Oversized Punching from 1-19/32" to 4")
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 028300 $ 325.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only- Max. 40 Ton 013186 $ 595.00
STRIPPER For Offset Die Holder (Includes Guard) 012127 $ 250.00
URETHANE STRIPPER ASSEMBLY 026040 $1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The
urethane stripper will NOT work with the offset die holder
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 3/8" or 5 x 5 x 1/2" (When Ordered Separate) 026727 $1,495.00
HYDRAULIC BAR SHEAR HOLD DOWN 017580 $1,895.00
* NOTE: Must be factory installed.
Ü ECONOMY FABRICATING PACKAGES ARE ON PAGE 10.
PAGE 9
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8 Ovals 9/32
x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 &
13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 savings: $520.00 PACKAGE PRICE $1,995.00
#2303 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,630.00 SAVINGS: $335.00 PACKAGE PRICE: $1,295.00
#2350 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) 5” Maximum,
Offset Die Holder (For Flange Punching) & Stripper For Offset Die Holder.
RETAIL PRICE: $4,040.00 SAVINGS: $545.00 PACKAGE PRICE: $3,495.00
#2342 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Deluxe Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $4,300.00 SAVINGS: $1,005.00 PACKAGE PRICE: $3,295.00
# 2343 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Electric Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $5,550.00 SAVINGS: $1,155.00 PACKAGE PRICE: $4,395.00
PAGE 10
MODEL 9012-24M $20,790.0090 TON PUNCH CAPACITY - 12" THROAT - 24" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
90 Ton Punch Station (1-1/8" in 1"), Keyed Punch Ram, 12" Throat Depth, Punch Gauging Table w/Fence & Scale, Die
Holder w/2" Insert, Punch Nut w/Wrench & Stripper, One Round Punch & Die: Maximum Diameter 1-1/4", Electric
Remote Foot Pedal, Punch Jog Control, Stroke Control w/Scale, Angle Shear - 6 x 6 x 1/2", 24" Flat Bar Shear
w/4-Way Reversible Blade - 1" x 8", 1/4" x 24", Shear Table w/Miter Fence, Tool Table Work Area, Two Stage Hy-
draulic Pump, Electrical Box w/Emergency Palm Button & Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All
Guards Comply w/ANSI B 11-5 Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
9012-24M (Less Angle Shear) $20,050.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 5 HP 220 Volt/60 HZ 006915 $ 345.00
WORK LIGHT (Factory Installation) 090392 $ 210.00
WORK LIGHT (When ordered separately--includes transformer) 090395 $ 410.00
LASER LIGHT For Bar Shear 033250 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033254 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
PUNCH SLUG RECEPTACLE 341150 $ 80.00
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE 026600 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V OPENING DIES STD. - FOR 1/4" MATERIAL 026300-016211 $ 1,425.00
24" BRAKE W/2" V OPENING DIES STD. - FOR 1/4" MATERIAL 026303-016211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001385 $ 1,625.00
OPTIONAL BRAKE DIES AVAILABLE 1" to 4" V Opening Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PAGE 11
PUNCH PUSHER For Pipe Notcher 001205 $ 120.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
RECTANGLE NOTCHER 2 x 2-1/2 x 3/8" 026000 $ 1,775.00
90 DEGREE V NOTCHER 6 x 6 x 5/16" 016610 $ 1,725.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016576 $ 3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-016247 $ 1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016590 $ 1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-016550 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 016096 $ 45.00
HEAVY DUTY RETAINING NUT (Punching from 1-19/32" to 4" ) 026500 $ 265.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 028300 $ 325.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
STRIPPER For Offset Die Holder (Includes Guard) 012127 $ 250.00
URETHANE STRIPPER ASSEMBLY 026060 $ 1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The urethane
stripper will NOT work with the offset die holder
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5 x 5 x 1/2" (When Ordered Separate) 026727 $ 1,495.00
HYDRAULIC BAR SHEAR HOLD DOWN 017580 $ 1,895.00
* NOTE: Must be factory installed.
Ü ECONOMY FABRICATING PACKAGES ARE ON PAGE 13.
PAGE 12
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8 Ovals 9/32
x 3/4, 5/16 x ¾, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 & 13/16
x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2323 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake length Gauge w/Scale & 12” Brake Table
W/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2332 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS: $520.00 PACKAGE PRICE: $1,995.00
#2303 PIPE NOTCHER PACKAGE INCLUDES; Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,630.00 SAVINGS: $335.00 PACKAGE PRICE: $1,295.00
#2351 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable), Offset Die
Holder For Flange Punching & Stripper For Offset Die Holder.
RETAIL PRICE: $4,040.00 SAVINGS: $545.00 PACKAGE PRICE: $3,495.00
#2342 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Deluxe Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $4,300.00 SAVINGS: $1,005.00 PACKAGE PRICE: $3,295.00
#2343 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Electric Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $5,550.00 SAVINGS: $1,155.00 PACKAGE PRICE: $4,395.00
PAGE 13
MODEL 12012-24M $24,290.00120 TON PUNCH CAPACITY - 12" THROAT - 24" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
120 Ton Punch Station (1-1/2" in 1"), Keyed Punch Ram, 12" Throat Depth, Punch Gauging Table w/Fence & Scale, Die
Holder w/2" & 2-1/2" Inserts, #40 & #45 Punch Nut w/Wrench & Stripper, One Round Punch & Die: Maximum Diam-
eter 1-1/4", Electric Remote Foot Pedal, Punch Jog Control, Stroke Control w/Scale, Angle Shear - 6 x 6 x 1/2", 24" Flat
Bar Shear w/4-Way Reversible Blade - 1" x 12", 1/2" x 24", Shear Table w/Miter Fence, Tool Table Work Area, Two
Stage Hydraulic Pump, Electrical Box w/Emergency Palm Button & Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics,
All Guards Comply w/ANSI B 11-5 Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
12012-24M (Less Angle Shear) $23,550.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 5 HP 220 VOLT/60 HZ 006915 $ 345.00
WORK LIGHT (Factory Installation) 090392 $ 210.00
WORK LIGHT (When Ordered Separately--Includes Transformer) 090395 $ 410.00
LASER LIGHT For Bar Shear 033250 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033254 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
PUNCH SLUG RECEPTACLE 341150 $ 80.00
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE 026600 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V OPENING DIES STD.-FOR 1/4" MATERIAL 026300-016211 $ 1,425.00
24" BRAKE W/2" V OPENING DIES STD.-FOR 1/4" MATERIAL 026303-016211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL BRAKE DIES AVAILABLE 1" to 4" V Opening. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4"Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2"Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PAGE 14
PUNCH PUSHER For Pipe Notcher 081205-340025 $ 135.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
RECTANGLE NOTCHER 2 x 2-1/2 x 3/8" 026000-080831 $ 1,830.00
90 DEGREE V NOTCHER 6 x 6 x 5/16 016615 $ 1,725.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016575 $ 3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-016247 $ 1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Maximum) 026350-016590 $ 1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-080835-001163 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 080220 $ 69.00
#49 RETAINING NUT (Punching from 1-5/8" to 2-1/16") 037020 $ 100.00
HEAVY DUTY RETAINING NUT (Punching from 1-19/32" to 4") 080895 $ 325.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026070 $ 1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The urethane
stripper will NOT work with the offset die holder
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5 x 5 x 1/2" (When Ordered Separate) 026727 $ 1,495.00
HYDRAULIC BAR SHEAR HOLD DOWN 017580 $ 1,895.00
*NOTE: Must be factory installed.
Ü ECONOMY FABRICATING PACKAGES ARE ON PAGE 16.
PAGE 15
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32,27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16,
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8 Ovals
9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 &
13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2323 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake length Gauge w/Scale & 12” Brake Table
W/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2332 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS: $520.00 PACKAGE PRICE: $1,995.00
#2305 PIPE NOTCHER PACKAGE INCLUDES; Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
&Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,645.00 SAVINGS: $350.00 PACKAGE PRICE: $1,295.00
#2352 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2342 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Deluxe Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $4,300.00 SAVINGS: $1,005.00 PACKAGE PRICE: $3,295.00
#2343 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor (24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
48” Electric Back Gauge & Tool Table Extension w/Punch & Die Storage Rack.
RETAIL PRICE: $5,550.00 SAVINGS: $1,155.00 PACKAGE PRICE: $4,395.00
PAGE 16
MODEL F.I. 8510-20M $24,290.00
FULLY INTEGRATED W/FIVE FIXED TOOL STATIONS85 TON PUNCH CAPACITY - 10" THROAT - 20" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
85 Ton Punch Station (1-1/16" in 1"), Keyed Punch Ram, 10" Throat Depth, Punch Gauging Table w/Fence
& Scale, Die Holder w/2" Insert, Punch Nut w/Wrench, Adjustable Swing-Away Stripper, One Round
Punch & Die: Maximum Diameter 1-1/4", Electric Remote Foot Pedal, Punch Jog Control, Stroke Control
w/Scale, Angle Shear - 6 x 6 x 1/2", 20" Flat Bar Shear w/4-Way Reversible Low Rake Blade - 1" x 12", 3/4" x
20", Rod Shear - 1-3/8" Round & 1-1/4" Square, Shear Table W/Miter Fence, Rectangle Notcher - 3" x 5" x
1/2", Notcher Table w/Scale &Guides, Shear Table w/Miter Fence, Two Stage Hydraulic Pump, Electrical
Box w/Emergency Palm Button & Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply
w/ANSI B 11-5 Standards, Forklift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 5 HP 220 Volt/ 60 HZ 006915 $ 345.00
WORK LIGHT (Factory Installation) 090392 $ 210.00
WORK LIGHT (When Ordered Separately--Includes Transformer) 090395 $ 410.00
LASER LIGHT For Bar Shear 033270 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033274 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
PUNCH SLUG RECEPTACLE 300020 $ 50.00
NOTCHER SLUG RECEPTACLE 300020 $ 50.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE 026600 $1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026997 $1,995.00
12" BRAKE W/2" V OPENING DIES STD. FOR 1/4" MATERIAL 027320 $1,425.00
24" BRAKE W/2" V OPENING DIES STD. FOR 1/4" MATERIAL 027325 $1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/SCALE 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $1,625.00
OPTIONAL BRAKE DIES AVAILABLE 1" to 4" V Opening. Call For Price And Delivery.
PAGE 17
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4"Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2"Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 015205-340025 $ 150.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016585 $3,195.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 001350-016560 $1,095.00
ANGLE SHEAR (6" x 6" x 3/8" or 5" x 5" x 1/2") 026727-016552 $1,495.00
(When Ordered Separately.)
90 DEGREE V NOTCHER 6 X 6 X 5/16 016617 $1,725.00
PICKET TOOL HOUSING (-Separate Dies Required For Each Size) 001293-015205-001163 $ 750.00
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 016096 $ 45.00
HEAVY DUTY RETAINING NUT (Punching from 1-19/32" to 4" ) 026500 $ 265.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026050 $1,695.00
* NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The ure-
thane stripper will NOT work with the offset die holder.
HYDRAULIC BAR SHEAR HOLD DOWN 017580 $1,895.00
* NOTE: Must be factory installed.
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 18
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8
Ovals 9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4,
11/16 x 1-1/4 & 13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2325 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $500.00 PACKAGE PRICE: $1,395.00
#2333 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $620.00 PACKAGE PRICE: $1,895.00
#2306 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies & Punch Pusher.
RETAIL PRICE: $1,540.00 SAVINGS: $295.00 PACKAGE PRICE: $1,245.00
#2353 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2344 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
Notcher Slug Receptacle & 48” Deluxe Back Gauge.
RETAIL PRICE: $3,925.00 SAVINGS: $730.00 PACKAGE PRICE: $3,195.00
#2345 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Punch Slug Receptacle,
Notcher Slug Receptacle & 48” Electric Back Gauge.
RETAIL PRICE: $5,175.00 SAVINGS: $980.00 PACKAGE PRICE: $4,195.00
PAGE 19
MODEL D.O. 8514-20M (DUAL OPERATOR) $32,990.00
DUAL OPERATOR, FULLY INTEGRATED W/FIVE FIXED TOOL STATIONSDUALOPERATOR - 85 TON PUNCH CAPACITY - 14" THROAT - 20" BAR SHEAR
— STANDARD EQUIPMENT INCLUDES:
Dual Operator allows for Two Operators to Work at the Same Time, 85 Ton Punch Station (1-1/16" in 1"),
Keyed Punch Ram, 14" Throat Depth, Punch Gauging Table w/Fence & Scale, Die Holder w/2" Insert,
Punch Nut w/Wrench, Adjustable Swing-Away Stripper, One Round Punch & Die: Maximum Diameter
1-1/4", Two Electric Remote Foot Pedals, Punch Jog Control, Stroke Control w/Scales, Slug-less Angle
Shear - 6 x 6 x 1/2", Rectangle Notcher - 2" x 4" x 1/2", 20" Flat Bar Shear w/Low Rake Angle 4-Way Revers-
ible Blade - 1" x 16", 3/4" x 20", Shear Table w/Miter Fence, Rod Shear - 1/2", 3/4", 1", 1-1/2" Round &
1-1/2" Square, Slug Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button
& Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Fork-
lift Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/ 60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to ¾”
48" DELUXE BACK GAUGE 025603 $ 575.00
48" DELUXE ELECTRIC BACK GAUGE 025600 $1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026995 $1,995.00
6" OPEN END BRAKE For Notcher Station 025360 $1,175.00
OPEN END BRAKE For Punch Station 001360-001365 $1,625.00
(Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron)
12" BRAKE W/2" V OPENING DIES STD. FOR 1/4" MATERIAL 027320 $1,425.00
24" BRAKE W/2" V OPENING DIES STD. FOR 1/4" MATERIAL 027325 $1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
OPTIONAL BRAKE DIES AVAILABLE 1" to 4" V Opening. Call For Price And Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size)001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4"Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
PAGE 20
1-1/2"Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 025205 $ 135.00
90 DEGREE V NOTCHER (6 x 6 x 5/16") Punch Station Only 016617 $1,725.00
90 DEGREE V NOTCHER (3 x 3 x 1/2") Notcher Station Only 025490 $1,525.00
CHANNEL SHEAR BLADES Only
2" - Includes Fixed Blade, Movable Blade & Hold Down 025420 (2” x 1” x 3/16’) $1,100.00
3" - Includes Fixed Blade, Movable Blade & Hold Down 025425 (4.1 lbs. per ft.) $1,100.00
4" - Includes Fixed Blade, Movable Blade & Hold Down 025430 (5.4 lbs. per ft.) $1,100.00
5" - Includes Fixed Blade, Movable Blade & Hold Down 025435 (6.7 lbs. per ft.) $1,100.00
6" - Includes Fixed Blade, Movable Blade & Hold Down 025440 (8.2 lbs. per ft.) $1,100.00
SQUARE TUBE SHEAR (1/2" to 2"14 Gauge Max.) Notcher Station Only 001350-016555 $1,095.00
SQUARE TUBE SHEAR(1/2" to 2" 14 Gauge Max.)Punch Station Only 001350-016560 $1,095.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-016605 $ 750.00
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 PUNCH RETAINING NUT (Punching from 1-9/32" to 1-9/16") 016096 $ 45.00
HEAVY DUTY RETAINING NUT (Punching from 1-9/32" to 4") 026500 $ 265.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 28300-80841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER For Punch End Only 025475 $ 975.00
PUNCH ASSEMBLY For Notcher Station 025485 $1,675.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 21
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16,
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8
Ovals 9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4,
11/16 x 1-1/4 & 13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2326 12” BRAKE PACKAGE INCLUDES: 12” Brake & 12” Brake Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,750.00 SAVINGS: $355.00 PACKAGE PRICE: $1,395.00
#2334 24” BRAKE PACKAGE INCLUDES: 24” Brake & 24” Brake Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,370.00 SAVINGS; $475.00 PACKAGE PRICE: $1,895.00
#2307 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies & Punch Pusher.
RETAIL PRICE: $1,525.00 SAVINGS: $280.00 PACKAGE PRICE: $1,245.00
#2354 CHANNEL SHEAR PACKAGE INCLUDES: 3” Fixed Blade, Moveable Blade & Hold Down, 4”
Fixed Blade, Moveable Blade & Hold Down & Offset Die Holder.
RETAIL PRICE: $2,795.00 SAVINGS: $450.00 PACKAGE PRICE: $2,345.00
#2346 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Work
Light (Factory Installation), Punch Table Extension & 48” Deluxe Back Gauge.
RETAIL PRICE: $2,960.00 SAVINGS: $665.00 PACKAGE PRICE: $2,295.00
#2347 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Work
Light (Factory Installation), Punch Table Extension & 48” Electric Back Gauge.
RETAIL PRICE: $4,210.00 SAVINGS: $1,215.00 PACKAGE PRICE: $2,995.00
PAGE 22
MODEL D.O. 70/ 110-24M $24,290.00
DUALOPERATOR - 70 TON PUNCH CAPACITY - 110 TON 24" BAR SHEAR
Dual Operator allows for Two Operators to Work at the Same Time, 70 Ton Punch Station (1-1/8" in 3/4"),
Keyed Punch Ram, 9" Throat Depth, Punch Gauging Table w/Fence & Scale, Die Holder w/2" Inserts,
Punch Nut w/Wrench, Adjustable Swing-Away Stripper, One Round Punch & Die: Maximum Diameter
1-1/4", Two Electric Remote Foot Pedals, Punch Jog Control, Stroke Control w/Scales, Angle Shear - 6 x 6 x
1/2", Rectangle Notcher - 3" x 5" x 3/8"or 3" x 4" x 1/2", Notcher Table w/Guides, 110 Ton 24" Flat Bar
Shear w/Low Rake Angle Saber Blade - 1" x 6", 3/8" x 24", Shear Table w/Miter Fence, Tool Table Work
Area, Slug Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button &
Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Forklift
Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
D.O.70/110-24M (Less Angle Shear) $23,550.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
LASER LIGHT For Bar Shear 033260 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033264 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE Shear Station Only 026610 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening DieS Std.-For 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL DIES AVAILABLE 1" to 4" V Openings. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size.) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
PAGE 23
1-1/4"Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2"Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 016629 $ 145.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
90 DEGREE V NOTCHER 6 x 6 x 5/16 016628 $ 1,725.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016576 $ 3,195.00
ROD SHEAR (Up To 1" Square Or 1-1/4" Round) 026774-026247 $ 1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016595 $ 1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size.) 001293-001163-001205 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY.
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32' to 1-9/16") 016096 $ 45.00
HEAVY DUTY RETAINING NUT (Punching from 1-19/32" to 4") 026500 $ 265.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026050 $ 1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The urethane
stripper will NOT work with the offset die holder
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5" x 5" x 1/2"(When Ordered Separately) 026727 $ 1,495.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 24
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package ROUNDS 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES:Deluxe #40 & #82 Punch & Die Package ROUNDS 1/4, 9/32, 5/16, 3/8, 13/32, 7/16,
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. SQUARES 1/2, 3/4 & 7/8.
OVALS 9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4,
11/16 x 1-1/4 & 13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake Ta-
ble w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake Ta-
ble w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $520.00 PACKAGE PRICE: $1,995.00
#2308 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,655.00 SAVINGS: $360.00 PACKAGE PRICE: $1,295.00
#2355 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear, (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2348 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Deluxe Back Gauge.
RETAIL PRICE: $4,105.00 SAVINGS: $810.00 PACKAGE PRICE: $3,295.00
#2349 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Electric Back Gauge.
RETAIL PRICE: $5,355.00 SAVINGS: $960.00 PACKAGE PRICE: $4,395.00
PAGE 25
MODEL D.O. 95/ 140-24M $25,990.00
DUALOPERATOR - 95 TON PUNCH CAPACITY - 140 TON 24" BAR SHEAR
Dual Operator allows for Two Operators to Work at the Same Time, 95 Ton Punch Station (1-3/16" in 1"),
Keyed Punch Ram, 9" Throat Depth, Punch Gauging Table w/Fence & Scale, Die Holder w/2" Inserts,
Punch Nut w/Wrench, Adjustable Swing-Away Stripper, One Round Punch & Die: Maximum Diameter
1-1/4", Two Electric Remote Foot Pedals, Punch Jog Control, Stroke Control w/Scales, Angle Shear - 6 x 6 x
1/2", Rectangle Notcher - 3" x 5" x 3/8"or 3" x 4" x 1/2", Notcher Table w/Guides, 140 Ton 24" Flat Bar
Shear w/Low Rake Angle Saber Blade - 1" x 8", 3/8" x 24", Shear Table w/Miter Fence, Tool Table Work
Area, Slug Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button &
Lock-out Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Forklift
Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
D.O.95/140-24M (Less Angle Shear) $25,250.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
LASER LIGHT For Bar Shear 033260 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033264 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
Both of the above include three vertical stop blocks material thickness 16 gauge to 3/4"
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
Both of the above include six vertical stop blocks material thickness 16 gauge to 3/4"
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE Shear Station Only 026610 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening DieS Std.-For 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL DIES AVAILABLE 1" to 4" V Openings. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size.) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
PAGE 26
1-1/4"Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2"Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 016629 $ 145.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
90 DEGREE V NOTCHER 6 x 6 x 5/16 016628 $ 1,725.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016576 $ 3,195.00
ROD SHEAR (Up To 1" Square Or 1-1/4" Round) 026774-026247 $ 1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016595 $ 1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size.) 001293-001163-001205 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY.
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32' to 1-9/16") 016096 $ 45.00
HEAVY DUTY RETAINING NUT (Punching from 1-19/32" to 4") 026500 $ 265.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026050 $ 1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”. The urethane
stripper will NOT work with the offset die holder.
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5" x 5" x 1/2"(When Ordered Separately) 026727 $ 1,495.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 27
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package ROUNDS 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES:Deluxe #40 & #82 Punch & Die Package ROUNDS 1/4, 9/32, 5/16, 3/8, 13/32, 7/16,
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. SQUARES 1/2, 3/4 & 7/8.
OVALS 9/32 x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4,
11/16 x 1-1/4 & 13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake Ta-
ble w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake Ta-
ble w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $520.00 PACKAGE PRICE: $1,995.00
#2308 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,655.00 SAVINGS: $360.00 PACKAGE PRICE: $1,295.00
#2355 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2348 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Deluxe Back Gauge.
RETAIL PRICE: $4,105.00 SAVINGS: $810.00 PACKAGE PRICE: $3,295.00
#2349 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Electric Back Gauge.
RETAIL PRICE: $5,355.00 SAVINGS: $960.00 PACKAGE PRICE: $4,395.00
PAGE 28
MODEL DO 120/200-24M $32,490.00DUAL OPERATOR - 120 TON PUNCH CAPACITY - 200 TON 24" BAR SHEAR
� STANDARD EQUIPMENT INCLUDES: Dual Operator allows for Two Operators to Work at the
Same Time, 120 Ton Punch Station (1-1/2" in 1"), Keyed Punch Ram, 12" Throat Depth, Punch
Gauging Table w/Fence & Scale, Die Holder w/2" & 2-1/2" Inserts, Punch Nut w/Wrench, Adjustable
Swing-Away Stripper, One Round Punch & Die: Maximum Diameter 1-1/4", Two Electric Remote
Foot Pedals, Punch Jog Control, Two Stroke Controls w/Scales, Angle Shear - 6 x 6 x 1/2", Rectangle
Notcher - 3" x 5-3/4" x 1/2", Notcher Table w/Guides, 200 Ton 24" Flat Bar Shear w/Low Rake Angle
Saber Blade - 1" x 12", 1/2" x 24", Shear Table w/Miter Fence, Tool Table Work Area, Slug
Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button & Lock-out
Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Forklift
Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART# PRICE
D.O.120/200-24M (Less Angle Shear) $31,750.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
LASER LIGHT For Bar Shear 033260 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033264 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
The four items above include six vertical stop blocks material thickness 16 gauge to 3/4".
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE Shear Station Only 026610 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL DIES AVAILABLE 1" to 4" V Openings. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size.) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
PAGE 29
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 081205-340025 $ 135.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
90 DEGREE V NOTCHER 6 x 6 x 5/16" 016635 $ 1,745.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016575 $3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-026247 $1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016590 $1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-080835-001163 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY.
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 080220 $ 69.00
#49 RETAINING NUT (Punching from 1-5/8" to 2-1/16") 037020 $ 100.00
HEAVY DUTY RETAINING NUT (Oversized Punching From 1-19/32" To 4") 080895 $ 325.00
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE INSERT For 2-1/2" O.D. Dies 006252 $ 150.00
DIE INSERT For 3" O.D. Dies 006302 $ 150.00
DIE HOLDER For 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026070 $1,695.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”and will NOT work with the offset die holder.
HYDRAULIC BAR SHEAR HOLD DOWN 017585 $1,895.00
NOTE: Must be factory installed.
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5 x 5 x 1/2" (When Ordered Separately) 026727 $1,495.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 30
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8, Ovals 9/32
x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 &
13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $520.00 PACKAGE PRICE: $1,995.00
#2305 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,645.00 SAVINGS: $350.00 PACKAGE PRICE: $1,295.00
#2352 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2348 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Deluxe Back Gauge.
RETAIL PRICE: $4,105.00 SAVINGS: $810.00 PACKAGE PRICE: $3,295.00
#2349 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Electric Back Gauge.
RETAIL PRICE: $5,355.00 SAVINGS: $960.00 PACKAGE PRICE: $4,395.00
PAGE 31
MODEL DO 135/220-24M $34,990.00DUAL OPERATOR - 135 TON PUNCH CAPACITY - 220 TON 24" BAR SHEAR
� STANDARD EQUIPMENT INCLUDES: Dual Operator allows for Two Operators to Work at the
Same Time, 135 Ton Punch Station (1-11/16" in 1"), Keyed Punch Ram, 12" Throat Depth, Punch
Gauging Table w/Fence & Scale, 2", 2-1/2" & 3" Die Holders, Punch Nut w/Wrench, Adjustable
Swing-Away Stripper, One Round Punch & Die: Maximum Diameter 1-1/4", Two Electric Remote
Foot Pedals, Punch Jog Control, Two Stroke Controls w/Scales, Angle Shear - 6 x 6 x 1/2", Rectangle
Notcher - 3" x 5-3/4" x 1/2", Notcher Table w/Guides, 220 Ton 24" Flat Bar Shear w/Low Rake Angle
Saber Blade - 1" x 12", 1/2" x 24", Shear Table w/Miter Fence, Tool Table Work Area, Slug
Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button & Lock-out
Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Forklift
Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART# PRICE
D.O.135/220-24M (Less Angle Shear) $34,250.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
LASER LIGHT For Bar Shear 033260 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033264 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
The four items above include six vertical stop blocks material thickness 16 gauge to 3/4".
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE Shear Station Only 026610 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL DIES AVAILABLE 1" to 4" V Openings. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size.) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
PAGE 32
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 081205-340025 $ 135.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
90 DEGREE V NOTCHER 6 x 6 x 5/16" 016635 $ 1,745.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016575 $3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-026247 $1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016590 $1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-080835-001163 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY.
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 080220 $ 69.00
#49 RETAINING NUT (Punching from 1-5/8" to 2-1/16") 037020 $ 100.00
HEAVY DUTY RETAINING NUT 080895 $ 325.00
(Oversized Punching From 1-19/32" To 4")
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE HOLDER For 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026080 $1,795.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4”and will NOT work with the offset die holder.
HYDRAULIC BAR SHEAR HOLD DOWN 017585 $1,895.00
NOTE: Must be factory installed.
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5 x 5 x 1/2" (When Ordered Separately) 026727 $1,495.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 33
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Round Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32,
23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8.Ovals 9/32
x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 &
13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $520.00 PACKAGE PRICE: $1,995.00
#2305 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,645.00 SAVINGS: $350.00 PACKAGE PRICE: $1,295.00
#2352 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2348 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Deluxe Back Gauge.
RETAIL PRICE: $4,105.00 SAVINGS: $810.00 PACKAGE PRICE: $3,295.00
#2349 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Electric Back Gauge.
RETAIL PRICE: $5,355.00 SAVINGS: $960.00 PACKAGE PRICE: $4,395.00
PAGE 34
MODEL DO 150/240-24M $37,490.00DUAL OPERATOR - 150 TON PUNCH CAPACITY - 240 TON 24" BAR SHEAR
� STANDARD EQUIPMENT INCLUDES: Dual Operator allows for Two Operators to Work at the
Same Time, 150 Ton Punch Station (1-7/8" in 1"), Keyed Punch Ram, 12" Throat Depth, Punch
Gauging Table w/Fence & Scale, 2", 2-1/2" & 3" Die Holders, Punch Nut w/Wrench, Adjustable
Swing-Away Stripper, One Round Punch & Die: Maximum Diameter 1-1/4", Two Electric Remote
Foot Pedals, Punch Jog Control, Two Stroke Controls w/Scales, Angle Shear - 6 x 6 x 1/2", Rectangle
Notcher - 3" x 5-3/4" x 1/2", Notcher Table w/Guides, 240 Ton 24" Flat Bar Shear w/Low Rake Angle
Saber Blade - 1" x 14", 3/4" x 24", Shear Table w/Miter Fence, Tool Table Work Area, Slug
Receptacles, 2-Two Stage Hydraulic Pumps, Electrical Box w/Emergency Palm Button & Lock-out
Tag-out, 230 or 440 Volt/3 Phase Electrics, All Guards Comply w/ANSI B 11-5 Standards, Forklift
Accommodations, Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART# PRICE
D.O.150/240-24M (Less Angle Shear) $36,750.00
OPTIONAL UL APPROVAL 005710 $ 125.00
SINGLE PHASE MOTOR, 10 HP 220 Volt/60 HZ 013500 $ 890.00
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installation) 090396 $ 95.00
LASER LIGHT For Bar Shear 033260 $ 750.00
LASER LIGHT For Bar Shear (Factory Installation) 033264 $ 750.00
PUNCH TABLE EXTENSION 026765 $ 295.00
36"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029291 $ 495.00
36"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029289 $ 495.00
85"PUNCH GAUGING EXTENSION (Left Hand Multi-Loc) 029292 $ 825.00
85"PUNCH GAUGING EXTENSION (Right Hand Multi-Loc)029293 $ 825.00
The above four items include six vertical stop blocks material thickness 16 gauge to 3/4".
TOOL TABLE EXTENSION W/Punch & Die Storage Rack 026695 $ 395.00
48" DELUXE BACK GAUGE 025603 $ 575.00
48" ELECTRIC BACK GAUGE Shear Station Only 026610 $ 1,825.00
INFEED CONVEYOR (24" x 5' W/Support Arms) 026980 $ 1,995.00
12" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026300-026211 $ 1,425.00
24" BRAKE W/2" V Opening Dies Std.-For 1/4" Material 026303-026211 $ 1,975.00
12" BRAKE TABLE W/Scale & Squaring Arm 026865 $ 325.00
24" BRAKE TABLE W/Scale & Squaring Arm 026880 $ 395.00
BRAKE LENGTH GAUGE W/Scale 026800 $ 145.00
OPEN END BRAKE (Maximum 1/4" x 6" Flat or 1/4" x 6" Angle Iron) 001360-001365 $ 1,625.00
OPTIONAL DIES AVAILABLE 1" to 4" V Openings. Call For Price & Delivery.
PIPE NOTCHER HOUSING (Separate Dies Required For Each Size.) 001195 $ 220.00
3/4" Schedule 40 Pipe UPPER & LOWER DIES 001220 Set $ 525.00
1" Schedule 40 Pipe UPPER & LOWER DIES 001222 Set $ 550.00
1-1/4" Schedule 40 Pipe UPPER & LOWER DIES 001224 Set $ 575.00
1-1/2" Schedule 40 Pipe UPPER & LOWER DIES 001226 Set $ 595.00
PAGE 35
2" Schedule 40 Pipe UPPER & LOWER DIES 001228 Set $ 625.00
PUNCH PUSHER For Pipe Notcher 081205-340025 $ 135.00
TOOL TABLE PUSHER For Pipe Notcher 001207 $ 120.00
90 DEGREE V NOTCHER 6 x 6 x 5/16" 016635 $ 1,745.00
CHANNEL SHEAR (2" to 6" Adjustable) 026372-016575 $ 3,195.00
ROD SHEAR (Up to 1" Square or 1-1/4" Round) 026774-026247 $ 1,575.00
SQUARE TUBE SHEAR (1/2" to 2" 14 Gauge Max.) 026350-016590 $ 1,250.00
PICKET TOOL HOUSING (Separate Dies Required For Each Size) 001293-080835-001163 $ 750.00
* MOUNTS IN THE PUNCH STATION ONLY.
1/2" 14 Gauge Max. UPPER & LOWER DIES 001150-001249 $ 295.00
3/4" 14 Gauge Max. UPPER & LOWER DIES 001190-001292 $ 295.00
1" 14 Gauge Max. UPPER & LOWER DIES 001162-001264 $ 295.00
#45 RETAINING NUT (Punching from 1-9/32" to 1-9/16") 080220 $ 69.00
#49 RETAINING NUT (Punching from 1-5/8" to 2-1/16") 037020 $ 100.00
HEAVY DUTY RETAINING NUT 080895 $ 325.00
(Oversized Punching From 2-3/32" To 4")
WRENCH For Heavy Duty Retaining Nut 018507 $ 28.00
DIE HOLDER For 6" x 6" Dies 028300-080841 $ 475.00
OFFSET DIE HOLDER For Flange Punching -2" O.D. Dies Only-Max. 40 Ton 013186 $ 595.00
URETHANE STRIPPER ASSEMBLY 026080 $ 1,795.00
NOTE: The urethane stripper works with the #40 tooling only-maximum diameter 1-1/4” and will NOT work with the offset die holder.
HYDRAULIC BAR SHEAR HOLD DOWN 017585 $ 1,895.00
NOTE: Must be factory installed.
UNEQUAL LEG ANGLE SHEAR BLADES
66 DEGREE (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2") 016238 $ 425.00
70 DEGREE (4" x 3", 2-1/2" x 2", 2" x 1-1/2") 016239 $ 425.00
74 DEGREE (6" x 4", 5" x 3-1/2", 3" x 2") 016240 $ 425.00
80 DEGREE (6" x 3-1/2", 5" x 3") 016241 $ 425.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE 026708 $ 295.00
ANGLE SHEAR 6 x 6 x 1/2" or 5 x 5 x 1/2" (When Ordered Separately) 026727 $ 1,495.00
Ü ECONOMY FABRICATING PACKAGES ARE ON THE FOLLOWING PAGE.
PAGE 36
ECONOMY FABRICATING PACKAGES:
#2545 INCLUDES: #40 & #82 Punch & Die Package Rounds 11/32, 15/32, 17/32, 19/32, 21/32, 23/32,
25/32, 27/32, 29/32, 31/32, 1-1/32 & 1-3/16.
RETAIL PRICE: $396.00 SAVINGS: $96.00 PACKAGE PRICE: $300.00
#2855 INCLUDES: Deluxe #40 & #82 Punch & Die Package Rounds 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16 & 1-1/4. Squares 1/2, 3/4 & 7/8, Ovals 9/32
x 3/4, 5/16 x 3/4, 9/32 x 1, 5/16 x 1, 13/32 x 1, 7/16 x 1, 17/32 x 1, 9/16 x 1, 9/16 x 1-1/4, 11/16 x 1-1/4 &
13/16 x 1-1/4.
RETAIL PRICE: $1,486.00 SAVINGS: $461.00 PACKAGE PRICE: $1,025.00
#2322 12” BRAKE PACKAGE INCLUDES: 12” Brake, Brake Length Gauge w/Scale & 12” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $1,895.00 SAVINGS: $400.00 PACKAGE PRICE: $1,495.00
#2330 24” BRAKE PACKAGE INCLUDES: 24” Brake, Brake Length Gauge w/Scale & 24” Brake
Table w/Scale & Squaring Arm.
RETAIL PRICE: $2,515.00 SAVINGS; $520.00 PACKAGE PRICE: $1,995.00
#2305 PIPE NOTCHER PACKAGE INCLUDES: Pipe Notcher Housing, 1-1/4” Schedule 40 Pipe Upper
& Lower Dies, 1-1/2” Schedule 40 Pipe Upper & Lower Dies, Punch Pusher & Tool Table Pusher.
RETAIL PRICE: $1,645.00 SAVINGS: $350.00 PACKAGE PRICE: $1,295.00
#2352 CHANNEL SHEAR PACKAGE INCLUDES: Channel Shear (2” to 6” Adjustable) & Offset Die
Holder.
RETAIL PRICE: $3,790.00 SAVINGS: $395.00 PACKAGE PRICE: $3,395.00
#2348 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Deluxe Back Gauge.
RETAIL PRICE: $4,105.00 SAVINGS: $810.00 PACKAGE PRICE: $3,295.00
#2349 PRODUCTIVITY PACKAGE INCLUDES: Infeed Conveyor ( 24” x 5’ w/Support Arms), Laser
Light For Bar Shear, Work Light (Factory Installation), Punch Table Extension, Tool Table Extension
w/Punch & Die Storage Rack & 48” Electric Back Gauge.
RETAIL PRICE: $5,355.00 SAVINGS: $960.00 PACKAGE PRICE: $4,395.00
PAGE 37
MODEL ShearMaster 610 $19,690.0024" Bar Shear
— STANDARD EQUIPMENT INCLUDES:
One set 24" Four Way Reversible Bar Blades, Electric Stroke Control, Electric Remote Foot Pedal, Shear
Table With Miter Fence, Hydraulic Hold Down, Electric Back Gauge, Two Stage Hydraulic Pump,
Electrical Box With Emergency Palm Button & Lock-Out, Tag-Out, 230 Or 440 Volt/3 Phase Electrics,
All Guards Comply With Ansi B11-5 Standards, Fork Lift Accommodations, & Three Year Warranty.
OPTIONAL EQUIPMENT AVAILABLE: PART # PRICE
WORK LIGHT 090385 $ 95.00
WORK LIGHT (Factory Installed) 090396 $ 95.00
Optional UL Approval 005710 $ 125.00
Single Phase Motor (10hp, 220 Volt) 013500 $ 890.00
Infeed Conveyor (24" x 5') 026976 $ 750.00
Advanced Feed System Call For Pricing.
PAGE 38
![1$32/ …o3ldqr7ulhqqdohghoo2iihuwd)rupdwlydghoodvfxrod(/(1$35 1& 3(66$' 1$32/ ªvwdwrhoderudwrgdofroohjlrghlgrfhqwlqhoodvhgxwdgho vxoodedvhghoodwwrgllqglul]]rghogluljhqwhsurw gho](https://static.fdocuments.net/doc/165x107/5e81295081c3420eb26e3d42/132-o3ldqr7ulhqqdohghoo2iihuwdrupdwlydghoodvfxrod135-1-366-132.jpg)
