Subsystem rolling stock: freight wagons (UTP WAG) EU OTIF ...
Transcript of Subsystem rolling stock: freight wagons (UTP WAG) EU OTIF ...
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 1
Please note this document is a working document of OTIF’s Committee of Technical Experts working groups WG TECH. This document is presently available in English only and solely for information purposes. This document will be updated regularly, however to find the applicable law in force please consult the OTIF website, the Official Journal of the European Union and the relevant national law of OTIF Member States.
Subsystem rolling stock: freight wagons (UTP WAG) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Decision 2004/446
Decision 2004/446 specifies the basic parameters of the NOI, WAG and TAF TSIs.
- - - No
Repealed 29.1.2007
WAG TSI related provisions repealed by Decision 2006/861/EC
Decision 2006/861
Date of application 29.1.2007
WAG TSI for conventional TEN
- - - No
Date of application 1.7.2009
Amended by Decision 2009/107
Date of application 24.1.2013
Amended by Decision 2012/464
UTP WAG A 94-02/3.2011 version 1
EIF 1.12.2012 Adopted 24.05.2012 Notified 23.06.2012 Repealed 1.1.2014
Yes from 1.12.2012
Equivalent with EU Decision 2006/861 and its subsequent listed amendments and also with:
The provisions for the marking of freight wagons as set out in Appendix P of EU Commission Decision 2011/314/EU (OPE TSI)
Repealed 1.1.2014
Repealed by Regulation 321/2013
Yes until 1.1.2014
Equivalence ended with repeal of EU Decision 2006/861
Regulation 321/2013
Date of application 1.1.2014
WAG TSI for entire European Union’s rail system Amended by Regulation 1236/2013 (Annex Amendments)
UTP WAG A 94-02/2.2012 version 7
EIF 1.1.2014 Adopted 12.06.2013 Notified 10.07.2013 Repealed 1.1.2015
Yes, from 1.1.2014
Equivalent with Regulation 321/2013 as amended by Regulation 1236/2013 and also with:
The provisions for the marking of freight wagons as set out in EU Commission Decision 2012/757/EU (OPE TSI) and EU Commission Decision 2007/756/EC on
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 2
Subsystem rolling stock: freight wagons (UTP WAG) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
National Vehicle Registers as applicable from 1.1.2014.
Some provisions related to safety management of Decision 2012/757/EC as indicated in App. I of UTP WAG A 94-02/2.2012 version 7.
Interfaces with CCS as indicated in App. H.
UTP WAG 2015 EIF 1.1.2015 Minor amendments compared to previous version 7. Adopted 4.6.2014 Notified 18.7.2014 Repealed 1.4.2021
Yes Amendments:
Deletion of Appendix P (now contained in UTP Marking) and modification of related references.
Update of reference to list of approved composite brake blocks.
Minor editorial change to Appendix I.
Decision amending UTP WAG 2015
EIF 1.12.2015
Minor amendments compared to previous version. Adopted 10.6.2015 Notified 17.6.2015
Yes UTP amendment take into account the update of:
Appendix G: “List of fully approved composite brake blocks for international transport” and
technical document: ERA/TD/2012-04/INT version 1.3 of 02.12.2014 “Attachment devices for rear-end signals, clearance for draw hooks, space for shunting staff operation, footsteps and handrails”
As the equivalent EU documents are published by ERA on its website, there is no corresponding legal amendment on the EU side.
Date of application
Amended by COMMISSION REGULATION (EU) 2015/924
Decision amending UTP
EIF 1.12.2016
Adopted 07.06.2016
Yes
Main amendments:
The revision of Appendices F and G to
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 3
Subsystem rolling stock: freight wagons (UTP WAG) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
1.7.2015 of 8 June 2015
WAG 2015
Notified 23.6.2016
COTIF applicable as of 1 July 2015.
Amendments made to the WAG TSI, which concern in particular the amendments related to the introduction of the interoperability constituent: “Friction element for wheel tread brakes”, the assessment methods for this IC, the validity of its examination certificates and the transitional provisions related to the new IC.
Amendments requested by the OTIF Contracting States expressed at the standing working group technology (WG TECH) meetings to further align the UTP and TSI, in particular in the field of axle traceability.
Editorial improvements and updates to legal references.
Date of application 16 June 2019
Amended by Commission Implementing Regulation 2019/776 of 16 May 2019
UTP WAG 2021 EIF 1.4.2021
Adopted 30.9.2020 Notified 1.3.2021
Yes
Date of application 11 March 2020
Commission Implementing Regulation (EU) 2020/387 of 9 March 2020
Adopted 22.6.2021 Notified 23.7.2021
Pending Decision taken by CTE 13. Entry into force expected 1.1.2022. Main amendments:
Definition of rules to manage changes in both a vehicle or a vehicle type (basic design characteristics)
New rules applicable when ara of use is extended
Specific case for the Great Britain network of the United Kingdom of Great Britain and Northern Ireland to be listed.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 4
Subsystem rolling stock: Locomotives and passenger rolling stock (UTP LOC&PAS)
EU OTIF EQUIVALENCE Base legal act Status + date (Legal) reference Provisions Entry into
force Status Equivalence Comments
Decision 2002/735
RST TSI for high-speed TEN - - - No
Repealed 30.6.2008
Repealed by Decision 2008/232
Amended 24.1.2013
Amended and Repealed by Decision 2012/462
Decision 2008/232
Date of application 1.9.2008
RST TSI for high-speed TEN- revised
- - - No
Amended 24.1.2013
Amended by Decision 2012/464
Repealed 1 1.1.2015
Repealed by Regulation 1302/2014
Decision 2011/291
Date of application 1.6.2011
LOC&PAS TSI for conventional TEN
- - - No
Amended 25.7.2012
Amended by Decision 2012/88 (CCS TSI)
Amended 24.1.2013
Amended by Decision 2012/464
Repealed 1.1.2015
Repealed by Regulation 1302/2014
Regulation 1302/2014
Date of Application 1.1.2015
LOC&PAS TSI for high-speed and conventional TEN
UTP LOC&PAS 2015
EIF 1.1.2015 Adopted 4.6.2014 Notified 18.7.2014
Yes from 1.1.2015
Full equivalence. In addition the UTP contains provisions which are equivalent with:
Some provisions related to safety management of Decision 2012/757/EC as indicated in App. K of UTP LOC&PAS 2015 .
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 5
1 Decisions 2008/232/EC and 2011/291/EU are repealed with effect from 1 January 2015, they shall however continue to apply in accordance with Article 11 of Regulation 1302/2014.
Date of Application 16.6.2019
Amended by Commission Implementing Regulation 2019/776 of 16 May 2019
Adopted 22.6.2021 Notified 23.7.2021
Pending Decision taken by CTE 13. Entry into force expected 1.1.2022. Main amendments:
Clarification of technical scope
Closure of open points as regards specifications on aerodynamic effects, passive safety, variable gauge systems and eddy current track brake, on-
board energy measuring systems, ‘Route compatibility checks before the use of authorised vehicles’.
Definition of rules to manage changes in both a vehicle or a vehicle type (basic design characteristics)
Specific case for the Great Britain network of the United Kingdom of Great Britain and Northern Ireland to be listed.
Date of Application 11.3.2020
Amended by Commission Implementing Regulation (EU) 2020/387 of 9 March 2020
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 6
Subsystem rolling stock: noise (UTP NOI) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Decision 2004/446
Specifies basic parameters of the NOI, WAG and TAF TSIs.
- - - No
Repealed 24.6.2006
NOI TSI related provisions repealed by Decision 2006/66
Decision 2006/66 EIF 23.6.2006
Noise TSI for conventional TEN.
- - - No
Repealed 4.4.2011
Repealed by Decision 2011/229
Decision 2008/232
EIF 1.9.2008
High Speed RST TSI, containing noise specifications.
- - - No
Repealed 1.1.2015
Noise provisions (points 4.2.6.5, 4.2.7.6 and 7.3.2.15) deleted by Regulation 1304/2014
Decision 2011/229
EIF 4.4.2011 Revised Noise TSI for conventional TEN.
UTP NOI A 94-04/2.2012 version 03
EIF 1.12.2012 Adopted 24.5.2012 Notified 27.6.2012 Repealed 1.12.2015
Yes from 1.12.2012
Amended 23.1.2013
Decision 2011/229 is amended by Decision 2012/464
Full equivalence as established on 1.12.2012 is not affected for vehicles.
Yes Amendment on OTIF side not necessary. The EU amendment 2012/464 concerns only the data to be registered in ERATV and does not affect the requirements at vehicle level. Equivalence for vehicle parameters is not affected.
Repealed 1.1.2015
Repealed and replaced by Regulation 1304/2014
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 7
Subsystem rolling stock: noise (UTP NOI) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 1304/2014
Date of Application 1.1.2015
Noise TSI for entire European Union’s Rail System
Yes (see comment)
2014 TSI NOI may be considered equivalent to 2012 UTP NOI for CR RST till 1.12.2015. Vehicles compliant with the new NOI TSI are deemed compliant (to be backwards- compatible) with the previous noise requirements. 2012 UTP NOI may be considered as equivalent to 2014 TSI NOI for CR RST till 1.12.2015. According to Regulation 1304/2014, Decision 2011/229 (NOI TSI) which is fully equivalent to 2012 UTP NOI may be used: - until 31/12/2021 for locomotives, EMUs, DMUs and coaches under the conditions of section 7.1.3 of Decision 2011/291 (LOC&PAS TSI) for cases where the latter decision was applied, or until 31 May 2017 for other cases. - until 13.4. 2016 for wagons as provided in the transitional periods in 2014 TSI NOI. Note: the period after 1.1.2016 is covered in the 2015 UTP NOI (see line below).
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 8
Subsystem rolling stock: noise (UTP NOI) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
UTP NOI 2015 EIF 1.12.2015 Revision of previous version. Adopted 10.6.2015 Notified 17.6.2015 Repealed 1.4.2021
Yes, with Regulation 1304/2014
The revision comprises the following changes:
Requirements cover not only conventional, but also high speed rolling stock
Applicable to all vehicles in the scope of the UTP WAG and UTP LOC&PAS
Additional limit values introduced for intermittent (main air compressor) and impulsive (air exhaust valve) noise
References to EN/ISO 3095, which replaces prEN content in the Appendix.
Amended: 16.6.2019
Amended by Commission Implementing Regulation 2019/776 of 16 May 2019
Yes, for vehicles
Vehicles compliant with the new NOI TSI are deemed compliant (to be backwards- compatible) with the previous noise requirements. Main amendments in TSI:
Introducing the concept of quieter routes on which wagons which do not comply with pass-by noise limits are not allowed to be operated.
UTP NOI 2021 EIF 1.4.2021
Adopted 30.9.2020 Notified 1.3.2021
Yes
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 9
Accessibility for PRM (UTP PRM) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Decision 2008/164
EIF 1.7.2008
PRM TSI for conventional and HS TEN.
- - - No
Amended 24.01.2013
Amended by Decision 2012/464
Repealed 1.1.2015
Repealed by Regulation 1300/2014
Regulation 1300/2014
Date of Application 1.1.2015
PRM TSI for entire European Union’s Rail System
UTP PRM 2015 EIF 1.1.2015 Adopted 4.6.2014 Notified 18.7.2014
Yes Full-equivalence will apply for rolling stock requirements. The requirements related to the infrastructure subsystem are voluntary in the UTP.
Date of Application 16.6.2019
Amended by Commission
Implementing Regulation 2019/772 of 16 May 2019
Yes, for vehicles
Main amendments in TSI:
Introduction of the minimum structure and content of data to be collected for the inventory of assets
19.7.2019: Consultation launched by ERA on its recommendation to modify the PRM TSI to take into account the objectives set out in Article 3 and in Article 10 of the Delegated Decision on TSIs. Consultation shared with OTIF CS.
Adopted 22.6.2021 Notified 23.7.2021
Pending Decision taken by CTE 13. Entry into force expected 1.1.2022. Main amendments:
Clarification of technical scope Specific case for the Great Britain
network of the United Kingdom of Great Britain and Northern Ireland to be listed.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 10
Vehicle marking (UTP Marking) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Appendix P of Decision 2011/314/EU
EIF 1.1.2012
CR OPE TSI Appendix P: European Vehicle Number and linked alphabetical marking on the bodywork.
UTP WAG A 94- 02/2.2012 version 1 Appendix PP (repealed)
EIF 1.1.2012
Adopted 24.05.2012 Notified 23.06.2012
Partly from 1.12.2012
Full equivalence for freight wagons. No equivalence for other types of rolling stock.
Appendix P of Decision 2012/757/EU (OPE TSI) + Appendix 6 to 2007/756/EC (NVR)
App. P to 2012/757/EU: EIF 1.1.2014 Amended: 1.7.2015 Repealed: 16.6.2021 App.6 to 2007/756/EC: EIF: 23.11.2007 Amended: 15.11.2018 Repealed: 16.6.2021
Appendix to the OPE TSI: European Vehicle Number and linked alphabetical marking on the bodywork. Amended by Regulation (EU) 2015/995 and repealed/ replaced by Appendix H of Regulation (EU) 2019/773 Commission Implementing Decision (EU) 2018/1614 amends NVR Decision 2007/756/EC from 15.11.2018 and repeals it from 16 June 2021
UTP WAG A 94- 02/2.2012
version 7 Appendix PP
EIF 1.1.2014
Adopted 12.06.2013 Notified 10.07.2013
Partly, continued
UTP Marking brings together the requirements related to marking in two EU documents: - Appendix P of OPE TSI (Decision 2012/757) - Appendix 6, parts 0-13 to NVR Decision The tables associated with standard numerical markings of wagons, as described in section 14 of UTP Marking, are published on the ERA website. The tables and detailed information provided in sections 15 to 18 are equivalent to the documents which were published on the ERA website at the time of adoption of this specification.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 11
Vehicle marking (UTP Marking) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
UTP Marking 2015
EIF 1.1.2015
Amendment: Adopted 5.6.2014 Notified 18.7.2014 Repealed 1.4.2021
Yes Full equivalence for all types of rolling stock. UTP Marking brings together the requirements related to marking in EU documents:
Appendix P of OPE TSI (Decision 2012/757)
Appendix 6, parts 0-13 to NVR Decision 2007/756/EC
The tables associated with standard numerical markings of wagons, as described in section 14 of UTP Marking, are published on the ERA website.
The tables and detailed information provided in sections 15 to 18 are equivalent to the documents which were published on the ERA website at the time of adoption of this specification.
Appendix 6 to Commission Implementing Decision (EU) 2018/1614 + Appendix H to Regulation (EU) 2019/773
Date of Application 16.6.2021 Date of Application 16.6.2021
EVR decision: Sets out rules for the vehicle keeper marking (VKM) and the 12-digit number. OPE TSI: Repeals and replaces Appendix P of Decision 2012/757/EU concerning European Vehicle Number and linked alphabetical marking on the bodywork
UTP MARKING 2021
EIF 1.4.2021
Adopted 30.9.2020 Notified 1.3.2021
Yes, continued
Main amendments foreseen in EU texts: 16.6.2021: update of references related to the new vehicle authorization process under the Fourth Railway Package. The UTP does not have equivalent TSI. Its provisions are relfelcted in the TSIs concerning Operations and Traffic Management (OPE) and EU provisions concerning vehicle registers. Main amendments to UTP:
Clarification of the process of assigning a unique vehicle number (EVN)
Impvements to the requirements for Vehicle Keeper Marking (VKM)
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 12
Essential requirements (UTP GEN-A) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Annex III to Directive 2008/57/EC
EIF 19.7.2008 Definition of Essential Requirements
APTU Annex 1-A A 94-01A/1.2009
EIF 1.9.2009 Adopted 12.2.2009 Notified 27.2.2009
Yes from 1.9.2009
UTP GEN-A A 94-01A/1.2011 version 5
EIF 1.5.2012 Adopted 15.9.2011 Notified 30.11.2011 Repealed 1.12.2015
Yes continued
OTIF document renamed only.
Amended 1.4.2013
Amended by Directive 2013/9/EU introducing ‘Accessibility’ as an Essential Requirement.
Partly from 1.4.2013
The Essential Requirement ‘Accessibility’ is not defined in UTP GEN-A. This limited equivalence has no effect on the requirements applicable to subsystems (e.g. vehicles).
Amended 31.3.2014
Amended by Directive 2014/38/EU modifying the Essential Requirement ‘Noise’.
Partly from 31.3.2014
The essential requirement ‘Noise’ is not equivalently defined. This limited equivalence has no effect on the requirements applicable to subsystems (e.g. vehicles).
UTP GEN-A 2015
EIF 1.1.2015 Adopted 5.6.2014 Notified 18.7.2014 Repealed 1.12.2017
Yes from 1.1.2015
Amendment updating the OTIF regulation in accordance with all previous EU amendments.
Repealed 16.6.2020
Repealed by Directive (EU) 2016/797
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 13
Annex III to Directive (EU) 2016/797
EIF 16.6.2016 Recast of the Directive and at the same way Reintroduction of Annex III
UTP GEN-A 2017 EIF 1.12.2017
Amendment: Adopted 13.6.2017 Notified 26.6.2017
Yes from 1.12.2017
The UTP GEN-A has been amended to ensure continued equivalence with the provisions applicable in the European Union. The existing version has been harmonised with the provisions of Directive (EU) 2016/797, which will repeal by 16.6.2020. In addition to the purely editorial modifications, the essential requirements set out in UTP GEN-A is made clearer in terms of passenger information and safety of passengers when boarding and alighting from trains.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 14
Subsystems (UTP GEN-B) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Annex II to Directive 2008/57/EC
EIF 19.7.2008 Definition of Subsystems APTU Annex 1-B A 94-01B/1.2009
EIF 1.9.2009
Adopted 12.2.2009 Notified 27.2.2009
Yes from 1.9.2009
Amended 22.3.2011
Amended by Directive 2011/18/EC
The EU modifications concerning CCS or electricity consumptions measuring are not in the scope of COTIF
UTP GEN-B A 94- 01B/1.2012 Version 6
EIF 1.5.2012
Adopted 15.9.2011 Notified 30.11.2011 Repealed 1.12.2017
OTIF document renamed only
Repealed 16.6.2020
Amended by Directive (EU) 2016/797
Annex II to Directive (EU) 2016/797
EIF 16.6.2016 Recast of the Directive and at the same way Reintroduction of Annex II
UTP GEN-B 2017 EIF 1.06.2019.
Adopted 13.6.2017 Notified 30.11.2017 Amended 1.6.2019
Yes from 1.12.2017
The UTP GEN-B has been amended to ensure continued equivalence with the provisions applicable in the European Union. The UTP GEN-B has been harmonised with the provisions of Directive (EU) 2016/797. In addition to the purely editorial modifications, the reference to ‘other railway material’ is deleted; as such references have also been deleted from APTU and ATMF.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 15
Technical File (UTP GEN-C) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Annex VI and Art. 18(3) of Directive 2008/57/EC
EIF 19.7.2008 Requirements related to technical file in Article 18(3) and point 4 of Annex VI.
APTU Annex 1-C A 94- 01C/1.2009
EIF 1.9.2009
Adopted 12.2.2009 Notified 27.2.2009
Yes from 1.9.2009 until 21.3.2011
Amended 22.3.2011
Amended by Directive 2011/18/EC.
UTP GEN-C A 94-01C/1.2011 Version 5
EIF 1.5.2012
Adopted 15.9.2011 Notified 30.11.2011 Repealed 1.01.2015
OTIF document renamed only
UTP GEN-C 2015 EIF 1.1.2015
Adopted 4.6.2014 Notified 18.7.2014 Repealed 1.12.2017
Yes from 1.1.2015
Repealed 16.6.2020
Repealed by Directive (EU) 2016/797
Annex IV and Art. 15 of Directive (EU) 2016/797
EIF 16.6.2016 Recast of the Directive and at the same way the former Annex VI and Article were replaced
UTP GEN-C 2017 EIF 1.12.2017
Amendment: Adopted 13.6.2017 Notified 26.6.2017
Yes from 1.12.2017
The UTP GEN-C has been amended to ensure continued equivalence with the provisions applicable in the European Union. The UTP GEN-C has been harmonised with the provisions of Directive (EU) 2016/797. In addition to the purely editorial modifications the required content of the technical file is defined more precisely.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 16
Assessment methods/modules (UTP GEN-D) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Decision 2010/713
Date of application 1.1.2011
Modules for assessment of conformity, suitability for use and EC verification
UTP GEN-D A 94- 01D/3.2011 version 1
1.10.2012 Adopted 23.9.2012 Notified 20.4.2012
Yes from 1.10.2012
In addition to the provisions of Decision 2010/713, the UTP GEN-D includes provisions which are equivalent to certain provisions in:
Directive 2008/57/EC, Art.15(1) and Annexes IV, V and VI as amended by Directive 2011/18/EC
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 17
Assessing entity – qualifications and independence (UTP GEN-E) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Annex VIII to Directive 2008/57/EC
EIF 19.7.2008 Minimum criteria which must be taken into account by the member states when notifying Bodies
APTU Annex 1-E A 94-01E/1.2009
EIF 1.9.2009
Adopted 12.2.2009 Notified 27.2.2009
Yes from 1.9.2009
UTP GEN-E A 94-01E/1.2011 version 5
EIF 1.5.2012
Adopted 15.9.2011 Notified 30.11.2011
Yes OTIF document renamed only.
ERA-ADV-2014-15 “The establishment of an accreditation scheme for NoBos”
No The ERA advice was elaborated for a possible establishment of an accreditation scheme for railways NoBos. It consists of a sectoral scheme for the accreditation of the conformity assessment bodies for the purpose of notification.
Repealed 16.6.2020
Repealed by Directive (EU) 2016/797
Article 30, 31 and 32 of Directive (EU) 2016/797
EIF 16.6.2016 Recast of the Directive and at the same way the former Annex VIII was replaced
The impact on the equivalence to be analysed.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 18
Common safety methods (CSM) on risk evaluation and assessment (UTP GEN-G) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 352/2009
Date of application 1.7.2012 19.7.2010 2
First set of CSM on RA UTP GEN-G A 94- 01G/1.2012
version 01
EIF 1.5.2012 Adopted 12.06.2013 Notified 10.07.2013 Repealed 21.5.2015
Yes from 1.5.2012
Repealed 21.5.2015
Repealed by Regulation 402/2013
Regulation 402/2013
Date of application 21.5.2015
UTP GEN-G A 94- 01G/1.2012 Version 3
EIF 1.1.2014 Adopted 12.6.2013 Applies from 21.05.2015 Amended 01.12.2016
Yes This amendment on both EU and OTIF sides introduce ‘CSM Assessment Bodies’ and how they are recognised or accredited.
Amended in order to distinguish the acceptance of risks associated with technical systems from the acceptance of operational risks and of the overall risk at the level of the railway system, the term ‘risk acceptance criteria’ with respect to technical systems into ‘harmonised design targets’ for such technical systems.
Specific definitions apply in reference to the harmonised quantitative design targets of technical systems.
Amended Date of application 3.8.2015
Amended by Regulation 2015/1136 of 13 July 2015
Decision amending A 94- 01G/1.2012 v03
EIF 1.12.2016
Adopted 07.6.2016 Notified 23.6.2016
Yes from 1.12.2016
2 The Regulation applies from 1 July 2012. However, it applies from 19 July 2010: (a) to all significant technical changes affecting vehicles as defined in Article 2(c) of Directive 2008/57/EC
and to all significant changes concerning structural subsystems, where required by Article 15(1) of Directive 2008/57/EC or by a TSI.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 19
Infrastructure (UTP INF) EU OTIF Equivalence
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 1299/2014
Date of Application
18.11.2014
Repealed by Regulation 2019/776
- - -
Regulation 2019/776
Date of Application 16.5.2019
Adopted 22.6.2021 Notified 23.7.2021
Pending Decision taken by CTE 13. Entry into force expected 1.1.2022.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 20
Telematics application for freight services (UTP TAF) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 1305/2014
Date of application 1.7.2012
TAF TSI and Change Control management
UTP TAF 2017 EIF 1.12.2017 Adopted 13.06.2017 Notified 26.06.2017
Yes from 1.12.2017
The purpose TAF TSI is to ensure the efficient interchange of information by setting the technical framework, to achieve a transport process that is as economically viable as possible. It covers the applications for freight services and the management of connections with other modes of transport. The UTP TAF represents the minimum legal requirements of the international information exchange for international freight services The UTP TAF refers to the appendices that are published and regularly updated on the website of the European Union Agency for Railways (ERA).
There is no deadline for non-EU Member States to complete implementation of the UTP TAF. Nevertheless, Contracting States have to ensure that any IT investments and developments in the scope of the UTP TAF comply with the UTP.
The UTP Version has some small differences from the EU TAF TSI, particularly in points 2.3.2 and 4.2.1.1, in order to ensure consistency with Appendix B to COTIF (CIM).
Date of Application 16.3.2018
Annex to Regulation 1305/2014 amended by Implementing Regulation 2018/278 of 23 February 2018 as regard to structure of the messages, data and message model, Wagon and
Decision amending UTP TAF 2017
EIF 1.6.2019
Adopted 17.12.2018 Notified 27.5.2019
Update refers to amended technical documents Appendix I of UTP TAF. Adopted by Written procedure.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 21
Intermodal Unit Operating Database, and to adopt an IT standard for the communication layer of the Common Interface
Date of application 16.6.2019
Amended by Commission Implementing Regulation (EU) 2019/778 of 16 May 2019 as regards to Change Control Management
Decision amending UTP TAF 2017
EIF 1.6.2020
Adopted 30.11.2019 Notified 30.4.2020
Yes Amendment to Appendix I of the UTP TAF.
Adopted 22.6.2021 Notified 23.7.2021
Yes Amendment to Appendix I of the UTP TAF 2017. Decisiontaken at CTE 13. Entry into force expected 1.1.2022.
Date of application 26.3.2021
Amended by Commission Implementing Regulation (EU) 2021/541 of 26 March 2021 as regard the simplification and improvement of data calculation and exchange and the update of the Change Control Management process
pending Draft proposals for modification of the UTP TAF reviewed at WG TECH 43 and 44.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 22
Train Composition and Route Compatibility Checks (UTP TCRC) EU OTIF Equivalence
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 2019/773 + Regulation 2019/777
Date of Application 16.5.2019 Date of Application 16.5.2019
Adopted 22.6.2021 Notified 23.7.2021
Pending Decision taken by CTE 13. Entry into force expected 1.1. 2022. The proposed UTP does not have one equivalent TSI. Instead, it combines the following:
a select number of parameters from Technical Specifications for Interoperability concerning operation and traffic management (OPE TSI): Route compatibility and train composition; train braking; ensuring that the train is running order.
the Annex C of specifications for the register of infrastructure (RINF).
Replacement of existing provisions under UTP WAG and UTP LOC&PAS
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 23
Vehicle Register Specifications EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Decision 2007/756
Published 23.11.2007
Common specification of NVR
A 94-20/1.2009 EIF 1.9.2009 Adopted 12.2.2009 Notified 27.2.2009
Yes from 1.9.2009
Amended Amended by Decision 2011/107
NVR UR A 94-20/2.2012
EIF 1.3.2013 Version 1: Adopted 23.5.2012 Notified 27.9.2012
Yes from 1.3.2013
Amended 1.7.2013
Amended by Regulation 519/2013 (accession of Croatia to the EU)
Amended 1.1.2014
Amended by Decision 2012/757
NVR 2015 EIF 1.1.2015 Adopted 5.6.2014 Notified 18.7.2014
Yes OTIF amendment compared to previous version: Parts 0-13 of Appendix 6 to NVR Decision are transposed in sections 7-18 of UTP Marking. Amendment does not affect equivalence.
Amended 14.11.2018
Amended by Commission Implementing Decision (EU) 2018/1614
NVR 2020 EIF 1.6.2020 Adopted 30.11.2019 (written procedure) Notified 30.4.2020 Repealed 16.6.2021
Yes
Repealed 16.6.2021
Repealed by Commission Implementing Decision (EU) 2018/1614
Commission Implementing Decision (EU) 2018/1614
Date of application 16.6.2021
Amending and Repealing Decision 2007/756 with effect
OTIF Specifications for Vehicle Registers 2021
EIF 1.4.2021
Adopted 30.9.2020 Notified 1.3.2021
Yes, parlty The EU Decision establishes the specifications for a centralised European Vehicle Register (EVR) to replace the NVR. The EVR shall be operational from 16.06.2021 and all EU member states must use the centralised registration function from 16.06.2024.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 24
Certification of entities in charge of maintenance (ECM) for freight wagons (ATMF Annex A) EU OTIF EQUIVALENCE
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Regulation 445/2011
EIF 31.5.2011 Certification of entities in charge of maintenance for freight wagons Repealed by Commission Implementing Regulation (EU) 2019/779 of 16 May 2019
Annex A to ATMF A 94-30/1.2012 Version 1
EIF 1.5.2012 Adopted 15.9.2011 Notified 30.11.2011 Repealed 1.12.2015
Yes from 1.5.2012
ATMF-Annex A 2015
EIF 1.12.2015
Adopted 10.6.2015 Notified 17.6.2015 Repealed 1.4.2021
The Maintenance Certificate which was missing in the 2012 version document has been added.
Commission Implementing Regulation (EU) 2019/779
EIF 16.6.2020
ATMF-Annex A 2021 Certification and Auditing of Entities in Charge of Maintenance
EIF 1.4.2021
Adopted 30.9.2020 Notified 1.3.2021
Yes Scope extention to ECMs of all types of vehicles.
Equivalence table EU/OTIF regulations [TECH-18024-WGT45-9] Last update: 05.10.2021
EIF - Entry into force / Date of Application/ Amended/ Repealed 25
Derogations (ATMF Annex B) EU OTIF Equivalence
Base legal act Status + date (Legal) reference Provisions Entry into force
Status Equivalence Comments
Article 9 and Annex IX of Directive 2008/57/EC
EIF 19.7.2008 Rules, conditions and processes for EU Member States to derogate from the use of TSIs.
Annex B to ATMF A 94-40/3.2012 version 4
EIF 1.1.2014
Adopted 12.6.2013 Notified 10.7.2013
Yes from 1.1.2014
Requirements and procedure for derogations from application of UTP(s) related to a structural or functional subsystem for use in international traffic.
Repealed 16.6.2020
By Directive (EU) 2016/797
Article 7 of Directive (EU) 2016/797
EIF 16.6.2016 Recast of the Directive and at the same way the former Article 9 and the Annex IX were replaced. Legally the annex IX of directive 2008/57 remains in force until the adoption of an implementing act.
The impact on the equivalence to be analysed. WG TECH 43 (2020) and 44 (2021) started discussing the need to modify Annex B to ATMF.