Submittals Equipos GREENHECK

5/22/2018 Submittals Equipos GREENHECK

1/17

70

96.75

51.125

68.88

50.5

2.5

StaticPressure(in.wg)

0.0

0.4

0.8

1.2

1.6

2.0

2.4

BrakePowe

r(hp)

0

3

6

9

12

15

18

Volume (CFM) x 10,000

0 1 2 3 4 5 6 7

824FRPM

Do no

tope

rate

insh

aded

are

a

System

26/05/2Printed Date:PEPSICO - 22Job:

PROCESS OMark:

CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page


2/17

Sound Power by Octave BandSound

Data62.5 125 250 500 1000 2000 4000 8000 LwA dBA Sones

Inlet 99 94 89 87 83 79 75 70 89 77 30

26.88

66.5

1.75

62.63

45

61.25

Model: RBU-3L54-75

Propeller Upblast Belt Drive

DimensionalQuantity 6

Weight w/o Acc's (lb) 751

Weight w/ Acc's (lb) 809

Max T Motor Frame Size 254

Roof Opening (in.) 63 x 63

PerformanceRequested Volume (CFM) 43,000

Actual Volume (CFM) 43,000

External SP (in. wg) 0.1

Total SP (in. wg) 0.1

Fan RPM 494

Operating Power (hp) 6.58

Elevation (ft) 43

Airstream Temp.(F) 70

Air Density (ft3) 0.075

Drive Loss (%) 3.8

Tip Speed (ft/min) 6,986

Static Eff. (%) 11

Motor

Motor Mounted Yes

Size (hp) 7 1/2

V/C/P 460/60/3

Enclosure TEFC

Motor RPM 1725

Windings 1

NEC FLA* (Amps) 11

Notes:All dimensions shown are in units of in..

*FLA - based on tables 150 or 148 of National Electrical

Code 2002. Actual motor FLA may vary, for sizing thermal

overload, consult factory.

LwA - A weighted sound power level, based on ANSI S1.4

dBA - A weighted sound pressure level, based on 11.5 dB

attenuation per Octave band at 5 ft - dBA levels are not

licensed by AMCA International

Sones - calculated using AMCA 301 at 5 ft


FG WAREHOMark:



3/17

Model: RBU-3L54-75

Propeller Upblast Belt Drive

Standard Construction Features:

- Curb caps and drive frame assemblies of galv steel sizes 18 to 48, painted steelsizes 54 and 60 - Galvanized steel windband with built in damper stops - Butterfly

dampers - Fabricated steel propeller - Ball bearing motors - Adjustable motor

plate - Variable pitch motor pulley - Fan shaft mounted in pillow block bearings

with grease zerks - Static free belts - Corrosion resistant fasteners

Options & Accessories:NEMA Premium Efficient Motor - meets NEMA Table 12-12

UL/cUL 705 Listed - "Power Ventilators"

Roof Curb-Galv., GPI-66.5-G12, Under Sized 1.5 in. Total

Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan And Attached Acc

Galvanized Construction

Steel Propeller

Steel Butterfly Damper

Bearings with Grease Fittings

Unit Warranty: 1 Yr (Standard)


FG WAREHOMark:



4/17

52

72

35.25

49.63

37.5

2.5

StaticPressure(in.wg)

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

BrakePowe

r(hp)

0.0

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

Volume (CFM) x 1,000

0 2 4 6 8 10 12 14 16 18 20

506FR

PM

Do not

operate

in sh

aded

area

System


CORN CLMark:



5/17



Inlet 92 90 86 83 79 75 71 65 85 74 24

AIR FLOW

See the Assembly Drawing For

Selected Accessories

56

2

25

19

49.25

Model: SBE-2L48-50

Sidewall Belt Drive Exhaust Fan





Optional Damper (in.) 50 x 50

Wall Opening (in.) 57.75 x 57.75





Fan RPM 518


Elevation (ft) 43



Drive Loss (%) 4.1


Static Eff. (%) 39

Motor

Motor Mounted Yes

Size (hp) 5

V/C/P 460/60/3

Enclosure TEFC

Motor RPM 1725

Windings 1

NEC FLA* (Amps) 7.6











UTILITMark:



6/17

Model: SBE-2L48-50



- Galvanized steel fan panel - Die formed, galvanized steel drive frame assembly- Fabricated steel propeller for Levels 1 and 2, welded and painted steel for Level

3 - Adjustable motor pulley - Ball bearing motors - Fan shaft mounted in ball

bearing pillow blocks - Static resistant belts - Corrosion resistant fasteners



Damper, WD-320-PB-50X50, Gravity Operated (Mounted), Coated

Short Wall Hsg, Flush Int., (2A-Exh), w/ OSHA Grd., Ctd with Hi-Pro Polyester,

Concrete Gray-RAL 7023

Galvanized Damper Guard

Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan & Attached Accessories




UTILITMark:



7/17

DAMPER TYP. SECTION VIEW

50

50

3.5

1.5

2.75


- Model WD-320 is a vertical mount exhaust damper and is constructed of 18 ga galvanized steel with pre-punched mount

holes and a flanged frame - Damper blades are 0.025 in. roll formed aluminum with vinyl seals on the closing edge - Steel

are 0.188 in. diameter zinc plated mounted steel in acetal bushings - Synthetic axle bearings

Notes: All dimensions shown are in units of in.

Width And height furnished approximately 0.125 in. undersize

Vertical Mount Exhaust Damper

Model: WD-320


UTILITMark:

CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1


8/17

56.38

3

56.38

44


- Galvanized steel construction - Heavy gauge mounting flanges - Pre-punched mounting holes - Insflanges allow damper to be mounted - Overlapping weatherhood flange keeps rain out - OSHA Prote

guard of welded steel wire completely protects the drive side of the wall housing.


Short Wall Housing


UTILITMark:



9/17



Inlet 91 89 85 82 78 74 70 64 84 73 22

AIR FLOW

See the Assembly Drawing For

Selected Accessories

56

2

25

19

49.25

Model: SBE-2L48-50






Optional Damper (in.) 50 x 50

Wall Opening (in.) 57.75 x 57.75





Fan RPM 495


Elevation (ft) 43



Drive Loss (%) 4.1


Static Eff. (%) 39

Motor

Motor Mounted Yes

Size (hp) 5

V/C/P 460/60/3

Enclosure TEFC

Motor RPM 1725

Windings 1

NEC FLA* (Amps) 7.6










26/05/2Printed Date:PEPSICO - 22Job:MECH ROOM 1Mark:



10/17

Model: SBE-2L48-50



- Galvanized steel fan panel - Die formed, galvanized steel drive frame assembly- Fabricated steel propeller for Levels 1 and 2, welded and painted steel for Level

3 - Adjustable motor pulley - Ball bearing motors - Fan shaft mounted in ball

bearing pillow blocks - Static resistant belts - Corrosion resistant fasteners



Damper, WD-320-PB-50X50, Gravity Operated (Mounted), Coated

Short Wall Hsg, Flush Int., (2A-Exh), w/ OSHA Grd., Ctd with Hi-Pro Polyester,

Concrete Gray-RAL 7023

Galvanized Damper Guard

Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan & Attached Accessories






11/17

DAMPER TYP. SECTION VIEW

50

50

3.5

1.5

2.75


- Model WD-320 is a vertical mount exhaust damper and is constructed of 18 ga galvanized steel with pre-punched mount

holes and a flanged frame - Damper blades are 0.025 in. roll formed aluminum with vinyl seals on the closing edge - Steel

are 0.188 in. diameter zinc plated mounted steel in acetal bushings - Synthetic axle bearings


Width And height furnished approximately 0.125 in. undersize

Vertical Mount Exhaust Damper

Model: WD-320




12/17

56.38

3

56.38

44


- Galvanized steel construction - Heavy gauge mounting flanges - Pre-punched mounting holes - Insflanges allow damper to be mounted - Overlapping weatherhood flange keeps rain out - OSHA Prote

guard of welded steel wire completely protects the drive side of the wall housing.


Short Wall Housing




13/17

Int er na l v iew

Width and Height furnished approximately 0.250 in. under size.

EACC-4014 in. Frame, Concealed Actuator

Appl ication & DesignEACC-401 is a combination louver/damper designed to protect air intake

exhaust openings in building exterior walls that, at times, require tight air soff. Design incorporates a drainable head member, drainable stationary blad

operable blades and a concealed actuator within the louver sill. When

operable blades are open, airflow is permitted through the louver, when

blades are closed, a tight seal is created to prevent the passage of air.

Construction Features

Frame Depth (in.): 4 Frame Thickness (in.): 0.125 Louver Material: Alumin

Frame Type: Channel Sizing: Nominal Fixed Blade Thick. (in.): 0.0

Adj. Blade Thick. (in.): 0.081 Blade/Jamb Seals: Yes Axle Bearings: Synth

Axle Material: Steel

Options and Accessories

Finish

Louver Finish Type: Mill

ActuatorActuator Type: 120 VAC Actuator Mount: Internal Actuator Location: Left

Actuator Fail. Pos.: Closed Act. Operating Mode: Two Position Transformer: None

NEMA Enclosure: 1 Act. Access: Internal

Insect ScreenInsect Screen Location: Internal Insect Screen Type: Aluminum

FiltersFilter Material: Aluminum Filter Type: Permanent Filter Supplier: Greenheck

Filter Removal: Rear Filter Depth (in.): 2.000

WarrantyProduct Warranty: 1 Yr (Standard)

Summary

ID # Tag Qty. W (in.) H (in.)Free Area

(ft2)Drive. Actuator Model Sect. Wide

Sect.

High

Sect.

Ship

Actuato

Ship Sec

1-1 12 75.000 75.000 15.39 11-1FIL-0 MS4120F1006 2 1 24 1

PerformanceID # Application Volume (CFM) Press. Drop (in. wg) Free Area Velocity (ft/min) BPWP (ft/min)

1-1 Intake 7,667 0.028 481 1,192

**Calculated pressure drop does not include the effects of screens, filters or other accessories


LOUVER UTILITIES & MECH ROMark:



14/17

Larger openings may require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand windloads up to a maximum of 25

PSF (size and configuration dependent). Design, materials and installation of structural reinforcement required to adequately support large sections or multiple section assemblies within a large

opening are not provided by Greenheck. Unless specifically indicated, the following are NOT included in the quote provided: structural steel, installation hardware (anchors, angle clips,

continuous angles, shims, fasteners, inserts, backer rod and sealant), field measuring and/or installation, miscellaneous flashing, trim or enclosures, blank off panels, mullion covers or mullion

hardware, hinged frames or removable subframes, custom bird/insect screen, 3-coat, metallic and/or exotic paint finishes, bituminous paints for unlike metals, any applicable taxes, stamped and

sealed structural calculations seismic calculations or job specific engineered submittal drawings.





15/17

Louvers Product Limited Warranty

Thank you for purchasing Greenheck louvers. Greenheck warrants this equipment to be free from defect in material and workmanship for a period of

yearfrom the date of product shipment. Any units or parts, which prove defective during the warranty period, will be repaired or replaced at our optio

when returned to our factory, transportation prepaid. Unless agreed upon otherwise Greenheck will not be held responsible for costs associated with

removal or installation of product(s).

The legal remedies described in this Limited Warranty are the sole exclusive remedy of Customer. This limited warranty will be void if payment from

Customer is not received within a commercially reasonable time frame. GREENHECK MAKES NO OTHER WARRANTY, EITHER EXPRESS OR

IMPLIED, REGARDING ITS PRODUCTS, OR ITS SELECTION AND APPLICATION, INCLUDING, BUT NOT LIMITED TO, COMPLIANCE WITH

BUILDING CODES, SAFETY CODES, LAWS, MERCHANTABILITY OR FITNESS OR A PARTICULAR PURPOSE. This limited warranty is extende

solely to the Customer. It is nontransferable and non-assignable, and the Customer shall not permit or authorize its employees, agents, representativ

or customers to claim, represent or imply that this limited warranty extends or is available to anyone other than the Customer.

In the event of material breach by the Customer of any of the conditions of this warranty, Greenheck shall have no liability for and product failure clai

Failure to pay Greenheck in full for original services will automatically make this warranty null and void.

Greenheck will not be held liable for incidental or consequential damages of any kind. The limited warranty of product(s) replaced or repaired under

limited warranty shall be limited to the remainder of the original warranty period. Greenheck reserves the right to reasonable field access to diagnos

and repair any product alleged to be defective. This limited warranty may not be modified by anyone and may not be changed by such things as

purchase order forms or acceptance forms, unless otherwise agreed upon by Greenheck.

This limited warranty is provided in lieu of any other warranty requirements or obligations, including, but not limited to, those within project specificati

All notices and claims given under or pursuant to this agreement shall be in writing and sent by certified or registered mail, postage prepaid, return

receipt requested to: Greenheck, Attn: Louver Sales, 525 Western Road, Schofield, WI 54476.

By proceeding to use our products and services on your project, you accept the terms of these limited warranties.





16/17

Int er na l v iew

Width and Height furnished approximately 0.250 in. under size.

FSJ-4024 in. Frame, J Blade

Appl ication & DesignFSJ-402 is fabricated stationary louver designed to protect air intake

exhaust openings in building exterior walls. Design incorporates stationastyle blades. The FSJ-402 is an extremely efficient louver with AM

LICENSED PERFORMANCE DATA enabling designers to select and apply w

confidence.

Construction Features

Frame Depth (in.): 4 Frame Thickness (ga): 18 Louver Material: 304

Frame Type: Channel Sizing: Nominal Fixed Blade Thick. (ga):

Shape: Rectangular Welded Construction: Yes

Options and Accessories

FinishLouver Finish Type: Mill

Insect ScreenInsect Screen Location: Internal Insect Screen Type: Stainless

FiltersFilter Material: Aluminum Filter Type: Permanent Filter Supplier: GreenheckFilter Removal: Rear Filter Depth (in.): 2.000

WarrantyProduct Warranty: 1 Yr (Standard)

Summary

ID # Tag Qty. W (in.) H (in.) Free Area (ft2) Sect. Wide Sect. High Sect. Ship

3-1 24 132.000 66.000 30.13 3 1 72

PerformanceID # Application Volume (CFM) Press. Drop (in. wg) Free Area Velocity (ft/min) BPWP (ft/min)

3-1 Intake 25,000 0.096 798 834

**Calculated pressure drop does not include the effects of screens, filters or other accessories

Larger openings may require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand windloads up to a maximum of 25

PSF (size and configuration dependent). Design, materials and installation of structural reinforcement required to adequately support large sections or multiple section assemblies within a large

opening are not provided by Greenheck. Unless specifically indicated, the following are NOT included in the quote provided: structural steel, installation hardware (anchors, angle clips,

continuous angles, shims, fasteners, inserts, backer rod and sealant), field measuring and/or installation, miscellaneous flashing, trim or enclosures, blank off panels, mullion covers or mullion

hardware, hinged frames or removable subframes, custom bird/insect screen, 3-coat, metallic and/or exotic paint finishes, bituminous paints for unlike metals, any applicable taxes, stamped and

sealed structural calculations seismic calculations or job specific engineered submittal drawings.


LOUVERS PROCMark:



17/17

Louvers Product Limited Warranty

Thank you for purchasing Greenheck louvers. Greenheck warrants this equipment to be free from defect in material and workmanship for a period of

yearfrom the date of product shipment. Any units or parts, which prove defective during the warranty period, will be repaired or replaced at our optio

when returned to our factory, transportation prepaid. Unless agreed upon otherwise Greenheck will not be held responsible for costs associated with

removal or installation of product(s).

The legal remedies described in this Limited Warranty are the sole exclusive remedy of Customer. This limited warranty will be void if payment from

Customer is not received within a commercially reasonable time frame. GREENHECK MAKES NO OTHER WARRANTY, EITHER EXPRESS OR

IMPLIED, REGARDING ITS PRODUCTS, OR ITS SELECTION AND APPLICATION, INCLUDING, BUT NOT LIMITED TO, COMPLIANCE WITH

BUILDING CODES, SAFETY CODES, LAWS, MERCHANTABILITY OR FITNESS OR A PARTICULAR PURPOSE. This limited warranty is extende

solely to the Customer. It is nontransferable and non-assignable, and the Customer shall not permit or authorize its employees, agents, representativ

or customers to claim, represent or imply that this limited warranty extends or is available to anyone other than the Customer.

In the event of material breach by the Customer of any of the conditions of this warranty, Greenheck shall have no liability for and product failure clai

Failure to pay Greenheck in full for original services will automatically make this warranty null and void.

Greenheck will not be held liable for incidental or consequential damages of any kind. The limited warranty of product(s) replaced or repaired under

limited warranty shall be limited to the remainder of the original warranty period. Greenheck reserves the right to reasonable field access to diagnos

and repair any product alleged to be defective. This limited warranty may not be modified by anyone and may not be changed by such things as

purchase order forms or acceptance forms, unless otherwise agreed upon by Greenheck.

This limited warranty is provided in lieu of any other warranty requirements or obligations, including, but not limited to, those within project specificati

All notices and claims given under or pursuant to this agreement shall be in writing and sent by certified or registered mail, postage prepaid, return

receipt requested to: Greenheck, Attn: Louver Sales, 525 Western Road, Schofield, WI 54476.

By proceeding to use our products and services on your project, you accept the terms of these limited warranties.


LOUVERS PROCMark:


Submittals Equipos GREENHECK

Documents

Transcript of Submittals Equipos GREENHECK