SUBMERSIBLE PUMPS - Raimaber...SUBMERSIBLE PUMPS 2 3 PRORIL PRORIL was established in 1979, starting...
Transcript of SUBMERSIBLE PUMPS - Raimaber...SUBMERSIBLE PUMPS 2 3 PRORIL PRORIL was established in 1979, starting...
2 3
PRORIL
PRORIL was established in 1979, starting from a small
motor factory where it has transformed itself into a global
size submersible pump manufacturer. Its perseverance and
dedication of making high quality products and maintaining
a strong working etiquette are mere images of the founder’s
belief and philosophy that contribute to the success of
PRORIL.
PRORIL specializes in submersible pump manufacturing
service, and continues investing in the fluid dynamics
design, motor efficiency enhancement, and R&D of various
metal alloys. The integration of upstream and downstream
suppliers has completed the manufacturing chain that
PRORIL proudly offers to its customers. PRORIL goes
through stringent quality procedures where its quality
management system conforms to the global standards.
Today, PRORIL has developed a complete product line that
covers dewatering pumps, sewage pumps, slurry pumps,
and others. They are applicable in general drainage,
construction, industrial sites, wastewater treatment, sludge
removal, and so on. Furthermore, PRORIL’s professional
R&D team continuously improves the product performance
to meet various needs in tough dewatering applications.
PRORIL Pumps Europe is the European distributor for
the PRORIL range of submersible pumps. Based in the
Netherlands, we carry an extensive stock of pumps and
parts along with modern workshop and testing facilities.
This combined with decades of pump experience enables
us to provide you with the best service possible.
PRORIL Pumps Europe
4 5
CONTENTS
HANDY & RESIDUE PUMPS 32 - 41
STAINLESS STEEL PUMPS 42 - 45
ACCESSORIES 46 - 47
TECHNICAL INFORMATION 48 - 51
DEWATERING PUMPS 6 - 13TANK 215 315 9 222 322 422 9 237 337 437 10 355 455 10 475 675 10
3110 4110 6110 11 4150 6150 11 4220 6220 8220 11
TANK SLIM 230 330 12 380 12
TANK 6370 8370 13 6450 8450 13
SMART 400 750 35 1500 35SMART BASE 400 35
SMART LITE 400 36 750 36
SMART LITE BASE 400 37
SAVVY 150 39 300 600 40
SAVVY JUMBO 300 600 40
SAVVY BASE 300 600 40
X-SMART 400 750 45 215 315 45
X-VOX 208 215 45
PROTECTOR PLUGS 46FLOAT SWITCH 46 GUIDE RAIL SYSTEM 47
INSTALLATION 48FRICTION LOSS CALCULATION 49CONVERSION CHARTS 50IMPELLER TYPES 51
SLURRY & SAND PUMPS 14 - 19STORMY 337 437 17 355 455 17 475 18 4110 6110 18 6150 6150L 18 6220 8220 18
SEWAGE PUMPS 20 - 31GOCUT 208 24 215 315 24 322 337 437 24
GOMAX 337 437 26 455 655 26 475 675 26 4110 6110 27 4150 6150 27 4220 6220 27
GOVOX 204 28 208 315 28 322 337 437 28 455 475 29 322S 337S 29
GUIDE RAIL SYSTEM 30
6 7
DEWATERINGPUMPSOur dewatering pumps are engineered for professional use in tough
dewatering applications in construction, industrial sites, and mines. With
a compact, slim design and our patented ACrS technology, these wear-
resistant portable dewatering pumps provide economical solutions. We are
the source you will ever need to make your profits real.
6 7
8 9
100
80
60
40
20
00 20 40 60 80 100 120 140 160 180 200
0 2 4 6 8 10 12
30
25
20
15
m
gpm
L/sec
ft
TANK 215
TANK 315
0
5
10
0 5 10 15 20 25 30 35 40m3/hr
100
90
80
70
60
50
40
30
20
10
00 50 1000 150 200 250 300 350
0 2 6 84 10 12 14 16 18 20 22
30
24
27
21
9
12
15
18
m
gpm
L/sec
ft
TANK 222
TANK 322
TANK 422
0
3
6
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75m3/hr
TANK 215 315
Outlet 2" (50 mm) 3" (80 mm)
Rated Output 1.5 kW 1.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 9 mm 9 mm
Height 537 mm 526 mm
Diameter Ø 258 mm Ø 272 mm
Weight 33 kg 33 kg
TANK 215 315
TANK 222 322 422
Outlet 2" (50 mm) 3" (80 mm) 4" (100 mm)
Rated Output 2.2 kW 2.2 kW 2.2 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 9 mm 9 mm 9 mm
Height 567 mm 557 mm 607 mm
Diameter Ø 258 mm Ø 272 mm Ø 288 mm
Weight 35 kg 35 kg 43 kg
TANK 222 322 422
2
3
4
5
6
98
7
10
11
1
After years of testing and continuous improvement, PRORIL
proudly presents our patented technology, Advanced Chromium
Steel Tech, ACrS Tech. Designed for high wear resistance and
superb corrosion resistance, ACrS Tech is applied to all our
dewatering and slurry pump family to tackle tough challenging
applications. The advantages of ACrS Tech can easily and
dramatically reduce operational costs.
Advanced Chromium Steel Tech
TANK SERIESHIGH CHROME DEWATERING PUMP
Designed for continuous operations, excellent performance and easy maintenance, PRORIL Tank series
pumps have proven their reliability and durability in demanding areas like construction, mining, tunneling,
quarries, industries and rental applications.
1 Watertight Cable Entry The cable entry employs an anti-wicking block where
each conductor is stripped and encapsulated in epoxy.
This feature effectively prevents water from penetrating
the motor chamber when the cable end is submerged
or the cable sheath is damaged.
2 Multi-Direction Discharge Coupling Discharge can be converted between vertical and
horizontal directions. In pumps 5,5 kW and larger, a
vertical discharge connection is supplied as standard.
3 Motor Protector The motor incorporates a circle thermal protector which
protects against overheating and dry-run.
4 Top Discharge and Double Housing Design Designed to construct a water jacket that provides
maximum motor cooling effect for continuous operation
at low water level, this feature forms the cylindrical and
slim shape of the pump and enables the pump to be
installed in confined spaces.
5 Submersible Motor Air filled motor, housed in a watertight casing, conforms
to Class F insulation.
6 C3 Ball Bearings and Hardened SS Shaft High quality of C3 ball bearings and the well-balanced,
hardened stainless steel shaft enhance stability during
continuous pumping operations.7 Double Mechanical Seals Located in the oil chamber, the device is made of quality
materials with highly wear-resistant silicon carbide in lower side
that provides extra protection against leakage and dry-run.
8 Extra Protection for Mechanical Seals and Shaft Lip seals and shaft sleeves are utilized for additional protection
against wear.
9 High Chrome Iron Impeller PRORIL patent formula, ACrS Tech is applied to all high chrome
iron impellers. This technology increases wear resistance to
particle abrasion.
10 Durable Outer Jacket and Strainer Corrugated Outer Jacket and strainer made from 304 stainless
steel provide impact resistance to harsh handling and
conditions. In pumps 5,5 kW and larger, flat 304 stainless steel
outer casing is provided as standard.
11 Food Grade Lubricant PRORIL adopts eco-friendly lubricant to minimize
environmental impacts.
FEATURESAnti-wicking
8
Also available in 230 Volt (S)
10 11
TANKTANK 3110 4110 6110237 337 437
TANKTANK 4150 6150355 455
TANK TANK475 675 4220 6220 8220
120
100
80
60
40
20
00 50 100 150 200 250 300 350 400
0 2 4 6 8 10 14 16 18 20 22 2412
36
32
28
24
20
16
12
m
gpm
L/sec
0 10 20 30 40 50 60m3/hr
ft
TANK 337
TANK 437TANK 237
0
4
8
70 80 90
120
100
80
60
40
20
00 50 100 150 200 250 300 350 400 450 500
0 5 10 15 20 25 30
36
3330272421
121518
9
m
gpm
L/sec
0 10 20 30 40 50 60m3/hr
ft
TANK 355
TANK 455
036
10070 80 90
160
140
120
100
80
60
40
20
00 100 200 300 400 500 600 700
0 5 10 15 20 25 30
45
40
35
30
25
20
15
m
gpm
L/sec
0 20 60 80 100 120 140m3/hr
ft
TANK 475
TANK 675
05
10
35 40
40
200
180
160
140
120
80
60
100
40
20
00 100 200 300 500400 600 700 800
0 5 10 15 20 25 30
605550
40
30
2520
m
gpm
L/sec
0 20 60 80 100 120 140m3/hr
ft
TANK 3110
TANK 4110
05
1510
45
35
35 40 45 50
40 160 180
TANK 6110
200
180
160
140
120
80
60
100
40
20
00 100 200 300 500400 600 700
0 5 10 15 20 25 30
605550
40
30
2520
m
gpm
L/sec
0 15 30 45 90 105 120 135 150m3/hr
ft
TANK 4150
TANK 6150
05
1510
45
35
35 40
7560
200220240
180160
140120
8060
100
4020
00 200 400 600 1000800 1200 16001400
0 20 3010 40 60
70
60
50
40
30
20
m
gpm
L/sec
0 30 60 90 180 210 240 270 300m3/hr
ft
TANK 4220
TANK 6220
0
10
70 908050 100
150120 330 360
TANK 8220
TANK 237 337 437
Outlet 2" (50 mm) 3" (80 mm) 4" (100 mm)
Rated Output 3.7 kW 3.7 kW 3.7 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 10 mm 10 mm 10 mm
Height 625 mm 578 mm 607 mm
Diameter Ø 283 mm Ø 273 mm Ø 288 mm
Weight 61 kg 42 kg 42 kg
TANK 355 455
Outlet 3" (80 mm) 4" (100 mm)
Rated Output 5.5 kW 5.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 10 mm 10 mm
Height 607 mm 636 mm
Diameter Ø 306 mm Ø 320 mm
Weight 60 kg 60 kg
TANK 475 675
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 7.5 kW 7.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 15 mm 15 mm
Height 796 mm 826 mm
Diameter Ø 317 mm Ø 317 mm
Weight 93 kg 97 kg
TANK 3110 4110 6110
Outlet 3" (80 mm) 4" (100 mm) 6" (150mm)
Rated Output 11 kW 11 kW 11 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 12 mm 15 mm 15 mm
Height 863 mm 859 mm 871 mm
Diameter Ø 354 mm Ø 354 mm Ø 354 mm
Weight 135 kg 135 kg 137 kg
TANK 4150 6150
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 15 kW 15 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 15 mm 15 mm
Height 889 mm 901 mm
Diameter Ø 354 mm Ø 354 mm
Weight 141 kg 142 kg
TANK 4220 6220 8220
Outlet 4" (100mm) 6" (150mm) 8" (200mm)
Rated Output 22 kW 22 kW 22 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 15 mm 20 mm 20 mm
Height 1083 mm 1097 mm 1152 mm
Diameter Ø 424 mm Ø 424 mm Ø 424 mm
Weight 256 kg 259 kg 264 kg
12 13
TANK SLIM
TANK SLIM
230 330
380
TANK
TANK
6370 8370
6450 8450
120
100
80
60
40
20
00 50 100 150 200 250 300
0 2 4 6 8 10 12 14 16 18
0 5 10 15 20 25 30 35
36
32
28
24
20
16
12
m ft
TANK SLIM 230
TANK SLIM 330
0
4
8
40 45 50 55
gpm
L/sec
m3/hr
300
250
200
150
100
50
00 200 400 600 800 1000 1200 1400 1600
0
0 40 80 120 160 200 240 280 320
10 20 30 40 50 60 70 80 90 100
90
80
70
60
50
40
30
m ft
TANK 6370
TANK 8370
0
10
20
gpm
L/sec
m3/hr
250
200
150
100
50
00 50 100 150 200 250 300 350
0 2 4 6 8 10 12 14 16 18 20
0 5 10 15 20 25 30 35
70
60
50
40
30
20
m ft
TANK SLIM 380
0
10
40 45 50 60 65 70 75
gpm
L/sec
m3/hr
300
250
200
150
100
50
00 200 400 600 800 1000 1200 1400 1600
0 10 20 30 40 50 60 70 80 90 100
90
80
70
60
50
40
30
m ft
TANK 6450
TANK 8450
0
10
20
0 50 100 150 200 250 300 350
gpm
L/sec
m3/hr
TANK SLIM 230 330
Outlet 2" (50 mm) 3" (80 mm)
Rated Output 3 kW 3 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 7 mm 7 mm
Height 659 mm 629 mm
Diameter Ø 188 mm Ø 188 mm
Weight 45 kg 38 kg
TANK 6370 8370
Outlet 6" (150 mm) 8" (200 mm)
Rated Output 37 kW 37 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 10 mm 20 mm
Height 1294 mm 1256 mm
Diameter Ø 532 mm Ø 532 mm
Weight 510 kg 510 kg
TANK 6450 8450
Outlet 6" (150 mm) 8" (200 mm)
Rated Output 45 kW 45 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 10 mm 20 mm
Height 1294 mm 1256 mm
Diameter Ø 532 mm Ø 532 mm
Weight 530 kg 530 kg
TANK SLIM 380
Outlet 3" (80 mm)
Rated Output 8 kW
Shaft Speed 2850 rpm
Solid Passage 8 mm
Height 798 mm
Diameter Ø 283 mm
Weight 92 kg
14 15
SLURRY & SANDPUMPSServing a wide range of slurry transport applications, PRORIL’s slurry
pumps are designed for long wear life, low energy consumption, excellent
performance, and easy maintenance. With our patented ACrS Tech and
rugged construction, these abrasion and corrosion resistant slurry pumps
provide economical solutions for challenging slurry transportation.
14 15
16 17
STORMY 337 437
2
3
10
11
4
9
8
6
5
7
1
STORMY SERIESOPEN STAND AND AGITATOR, STRAINER AND AGITATOR
Rugged, reliable and cost effective, the Stormy series pumps come complete with patented high chrome
impellers, agitators, and wear plates to withstand tough slurry transportation. STORMY pumps are designed
with two different types of pump stands, the open stand and the strainer. Our slurry pumps serve a wide range
of slurry transport applications like mining, quarrying, construction sites, and other demanding industries.
1 Watertight Cable Entry The cable entry employs an anti-wicking block where
each conductor is stripped and encapsulated in epoxy.
This feature effectively prevents water from penetrating
the motor chamber when the cable end is submerged
or the cable sheath is damaged.
2 Top Discharge and Side Flow Design Designed to cool the motor with pumped water even
at low water level, this feature forms the cylindrical and
slim shape of the pump and enables the pump to be
installed in confined spaces.
3 Motor Protector The motor incorporates a circle thermal protector which
protects against overheating and dry-run.
4 Submersible 4-Pole Motor Air filled motor, housed in a watertight casing, conforms
to Class F insulation. The 4-pole motor helps reducing
impeller wears.
5 C3 Ball Bearings and Hardened SS Shaft High quality of C3 ball bearings and the well-balanced,
hardened stainless steel shaft enhance stability during
continuous pumping operations.
6 Double Mechanical Seals Located in the oil chamber, the device is made of quality
materials with highly wear-resistant silicon carbide
in lower side that provides extra protection against
leakage and dry-run. 7 Extra Protection for Mechanical Seals and Shaft Lip seals and shaft sleeves are utilized for additional protection
against wear.
8 High Chrome Iron Impeller, Agitator, and Wear plate PRORIL patent formula, ACrS Tech is applied to all high chrome iron
components, including impellers, agitators, and wear plates. This
technology increases wear resistance to particle abrasion.
9 Hardened Pump Volute The pump volute is made from hardened cast ductile iron. This
technology enhances the hardness and wear life of the pump casing.
10 Rugged Cast Iron Construction The whole cast iron pump features a simple, robust structure that
provides durability and impact resistance to rough conditions.
11 Food Grade Lubricant PRORIL adopts eco-friendly lubricant to minimize
environmental impacts.
FEATURES
Anti-wicking
STORMY 355 455
6055504540353025201510
50
0 50 100 150 200 250 300 350 400 450 500
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
18
16
14
12
10
8
6
m ft
STORMY 337
STORMY 437
0
2
4
0 10 20 30 40 50 60 11070 80 90 100
gpm
L/sec
m3/hr
80
70
60
50
40
30
20
10
00 100 200 300 400 500 600 700
0 5 10 15 20 25 30 35 40
242220181614
8
m ft
STORMY 355 STORMY 455
0
46
1210
2
0 20 40 60 80 100 120 140
gpm
L/sec
m3/hr
STORMY 337 437
Outlet 3" (80 mm) 4" (100 mm)
Rated Output 3.7 kW 3.7 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 25 mm 25 mm
Height ⓅHeight Ⓢ
762 mm793 mm
783 mm814 mm
Diameter ⓅDiameter Ⓢ
Ø 385 mm Ø 382 mm
Ø 385 mmØ 382 mm
Weight ⓅWeight Ⓢ
110 kg115 kg
110 kg115 kgⓅ
Ⓟ
Ⓢ
Ⓢ
STORMY 355 455
Outlet 3" (80 mm) 4" (100 mm)
Rated Output 5.5 kW 5.5 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 25 mm 25 mm
Height ⓅHeight Ⓢ
806 mm806 mm
826 mm826 mm
Diameter ⓅDiameter Ⓢ
Ø 420 mm Ø 412 mm
Ø 420 mmØ 412 mm
Weight ⓅWeight Ⓢ
123 kg131 kg
124 kg132 kg
The rigid agitator delivers kinetic energy (energy of motion) to stir solids surroun-ding the pump intake, re-suspending them into a fluid state for easy pumping.
Conventional:The agitator is simply attached onto the end of the pump shaft. As the agitator is only fastened at a single point, the agitator can loosen itself or come off during use.
PRORIL Pump’s design:By using a prolonged pump shaft, the agitator is fastened at three separate points, ensuring that the agitator cannot loosen itself.
Agitator fasteningHow the agitator works
Ⓟ = open stand Ⓢ = strainer
Ⓟ = open stand Ⓢ = strainer
16
18 19
80
70
60
50
40
30
20
10
00 100 200 300 400 500 600 700
0 5 10 15 20 25 30 35 40
242220181614
8
m ft
STORMY 475
0
46
1210
2
0 20 40 60 80 100 120 140
gpm
L/sec
m3/hr
STORMY 475
80
90
70
60
50
40
30
20
10
00 100 200 300 400 500 600 700 800 900 1000
0 5 10 15 20 25 30 35 40
27
24
15
m ft
STORMY 4110
0
9
12
21
18
3
6
45 50 55 60
0 40 80 120 160 200
gpm
L/sec
m3/hr
STORMY 6110
STORMY 4110 6110
8090
100
110
70
60
5040
30
2010
00 300 600 1200 1500900 1800
0 10 20 30 40 50 60
33
24
15
m ft
STORMY 6150
0
9
12
30
27
21
18
36
70 80 90 100 110
0 40 80 120 120 120 160
gpm
L/sec
m3/hr
STORMY 6150L
STORMY 6150 6150L
8090
100
110
70
60
5040
30
2010
00 300 600 1200 1500900 1800
0 10 20 30 40 50 60
33
24
15
m ft
STORMY 6220
0
9
12
30
27
21
18
36
70 80 90 100 110
0 30 60 90 120 150 180 210 240 270 300 330 360 390
gpm
L/sec
m3/hr
STORMY 8220
STORMY 6220 8220
Ⓟ
Ⓟ
Ⓟ
Ⓟ
Ⓢ
Ⓢ
Ⓢ
Ⓢ
STORMY 475
Outlet 4" (100 mm)
Rated Output 7.5 kW
Shaft Speed 1450 rpm
Solid Passage 25 mm
Height ⓅHeight Ⓢ
826 mm826 mm
Diameter ⓅDiameter Ⓢ
Ø 420 mmØ 412 mm
Weight ⓅWeight Ⓢ
124 kg132 kg
STORMY 4110 6110
Outlet 4" (100mm) 6" (150mm)
Rated Output 11 kW 11 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 25 mm 35 mm
Height ⓅHeight Ⓢ
914 mm923 mm
926 mm935 mm
Diameter ⓅDiameter Ⓢ
Ø 479 mmØ 479 mm
Ø 479 mmØ 479 mm
Weight ⓅWeight Ⓢ
191 kg199 kg
192 kg200 kg
STORMY 6150 6150L
Outlet 6" (150 mm) 6" (150mm)
Rated Output 15 kW 15 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 35 mm 35 mm
Height ⓅHeight Ⓢ
926 mm935 mm
926 mm935 mm
Diameter ⓅDiameter Ⓢ
Ø 479 mmØ 479 mm
Ø 479 mmØ 479 mm
Weight ⓅWeight Ⓢ
201 kg208 kg
201 kg208 kg
STORMY 6220 8220
Outlet 6" (150mm) 8" (200mm)
Rated Output 22 kW 22 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 30 mm 40 mm
Height ⓅHeight Ⓢ
1204 mm1210 mm
1166 mm1172 mm
Diameter ⓅDiameter Ⓢ
Ø 592 mmØ 592 mm
Ø 592 mmØ 592 mm
Weight ⓅWeightⓈ
345 kg357 kg
355 kg367 kg
Ⓟ = open stand Ⓢ = strainer19
Ⓟ = open stand Ⓢ = strainer
Ⓟ = open stand Ⓢ = strainer
Ⓟ = open stand Ⓢ = strainer
20 21
SUBMERSIBLE SEWAGE PUMPS
CUTTER PUMPS
SINGLE CHANNEL PUMPS
VORTEX SEWAGE PUMPS
VORTEX & AGITATOR PUMPS
Robust Design, Real Quality
Designed for excellent performance, low energy consumption, and easy
maintenance, PRORIL submersible sewage pumps serve a wide range of
sewage transport applications. They are ideal for residential, commercial,
industrial sewage transferring, wastewater treatment plant, site drainage, etc.
20 21
22 23
GOCUT SERIES CUTTER PUMPS
Discharge Bore : 50 - 100 mm
Motor : 0.4 ~ 3.7 kW, 2-Pole Motor
Impeller Type : Semi-Open Channel Cutter impeller
Features : Utilizing a cutter mechanism and tungsten carbide alloy to
cut fibrous matters and to prevent clogging.1 Watertight Cable Entry The cable entry employs an anti-wicking block where
each conductor is stripped and encapsulated in epoxy.
This feature effectively prevents water from penetrating
the motor chamber when the cable end is submerged
or the cable sheath is damaged.
2 Motor Protector The motor incorporates a motor protection device which
protects against overheating and dry-run.
Pumps with a capacitor-run or direct-on line starting
motor are equipped with a circle thermal protector.
Pumps with a start-delta starting motor are equipped
with miniature thermal protectors in each phase.
3 Submersible Motor Air filled motor, housed in a watertight casing, conforms
to Class F insulation.
4 C3 Ball Bearings and Hardened SS Shaft High quality of C3 ball bearings and the well-balanced,
hardened stainless steel shaft enhance stability during
continuous pumping operations.
COMMON FEATURES
4
7
5
2
3
8
6
9
1
Anti-wicking
SEWAGE PUMPS
5 Double Mechanical Seals Located in the oil chamber, the device is made of quality
materials with highly wear-resistant silicon carbide in lower side
that provides extra protection against leakage and dry-run.
6 Extra Protection for Mechanical Seals and Shaft Lip seals and shaft sleeves are utilized for additional protection
against wear.
7 Rugged Cast Iron Design The whole cast iron pump features a simple, robust structure
that provides durability and impact resistance to
rough conditions.
8 Food Grade Lubricant PRORIL adopts eco-friendly lubricant to minimize
environmental impacts.
9 Impellers and Volutes Types of impellers and volutes are varied with pump
models, cultivated through years of experience in the pump
manufacturing industry.
They include singe channel impellers, vortex impellers, semi-
open impellers, grinders, and agitators.
GOMAX SERIES SINGLE CHANNEL PUMPS
Discharge Bore : 80 - 150 mm
Motor : 3.7 ~ 22 kW, 4-Pole Motor
Impeller Type : Single Channel impeller
Features : Passing 76mm diameter solids without clogging.
GOVOX SERIES VORTEX PUMPS
Discharge Bore : 50 - 100 mm
Motor : 0.4 ~ 7.5 kW, 2-Pole Motor
Impeller Type : Vortex impeller
Features : A whirling action enables large solids and fibrous
matters to be pumped out without obstruction.
GOVOX-S SERIES VORTEX & AGITATOR PUMPS
Discharge Bore : 80 - 100 mm
Motor : 2.2 ~ 3.7 kW, 2-Pole Motor
Impeller Type : Vortex impeller
Features : Coupled with an agitator, which significantly and efficiently
improves solids handling.
22
24 25
GOCUT SERIES CUTTER PUMPS
● GOCUT Series pumps are designed for handling raw sewages and various wastewater treatments. ● The cutting mechanism shreds fibrous materials into small pieces to prevent from clogging that would
happen on a common pump.● The cutting mechanism consists of a chopper plate and a tungsten carbide alloy tipped onto each vane
of the semi-open channel impeller.● Guide rail fittings are available on request.
GOCUT 208
35
40
30
25
20
15
10
5
00 10 70 80 90 100 110 12020 40 5030 60
0 1 2 3 4 5
10
12m ft
GOCUT 208
0
6
8
2
4
6 7
0 4 8 12 16 20 24
gpm
L/sec
m3/hr
GOCUT 208
Outlet 2" (50 mm)
Rated Output 0.75 kW
Shaft Speed 2850 rpm
Solid Passage 26 mm
Height 434 mm
Diameter Ø 301 mm
Weight 21.5 kg
GOCUT 215 315
60
50
40
30
20
10
00 20 40 80 100 120 140 16060 180
0 1 2 3 4 5 6
16
m ft
GOCUT 215
0
12
14
18
2
4
10
8
6
7 8 9 10 11
0 4 8 12 16 20 24 28 32 36 40
gpm
L/sec
m3/hr
GOCUT 315
GOCUT 215 315
Outlet 2" (50 mm) 3" (80 mm)
Rated Output 1.5 kW 1.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 27 mm 27 mm
Height 463 mm 463 mm
Diameter Ø 301 mm Ø 301 mm
Weight 26.5 kg 26.5 kg
GOCUT 322 337 437
50
60
70
40
30
20
10
00 50 100 150 250200 300 400350
0 4 62 8 12
20
18
16
14
12
10
8
64
2
m
gpm
L/sec
0 10 20 30 40 50 60 70 80m3/hr
ft
GOCUT 322
GOCUT 437
0
14 181610 2420 22
GOCUT 337
GOCUT 322 337 437
Outlet 3" (80 mm) 3" (80 mm) 4" (100 mm)
Rated Output 2.2 kW 3.7 kW 3.7 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 27 mm 37 mm 37 mm
Height 642 mm 642 mm 642 mm
Diameter Ø 482 mm Ø 482 mm Ø 482 mm
Weight 55 kg 59.5 kg 59.5 kg
Also available in 230 Volt (S)
25
Also available with float switch (A).
26 27
GOMAX SERIES SINGLE CHANNEL PUMPS
● Designed for passing 76mm diameter solids without clogging, GOMAX series employ a single-channel enclosed impeller to efficiently and reliably transfer raw sewage.
● GOMAX series featured high efficiency, non-clogging, long life, and energy saving.● The design of air release valve in pump casing prevents air lock.● GOMAX series are suitable for commercial and industrial wastewater applications.● Guide rail fittings are available on request.
GOMAX 337 437 GOMAX 4110 6110
GOMAX 455 655 GOMAX 4150 6150
50
60
70
80
40
30
20
10
00 100 200 400300 500 700 800 900 1000600
0
202224
1816141210
8642
m
gpm
L/sec
0
5 10 15 20 25 30 35 40
m3/hr
ft
GOMAX 455
GOMAX 655
0
20 40 60 80 100 120 140 160 180 200
45 50 55 60
60
80
100
120
40
20
00 200 400 800 1000 1400 16001200600
0
m
gpm
L/sec
0m3/hr
ft
GOMAX 4150
GOMAX 6150
0
5
10
15
20
25
30
35
10 20 30 40 50 60 70 80 90 100
40 80 120 160 200 240 280 320 360
50
60
70
80
90
40
30
20
10
00 200 400 800 1000 1200600
0
2022
26
1816141210
8642
m
gpm
L/sec
0m3/hr
ft
GOMAX 475
GOMAX 675
0
24
10 20 30 40 50 60 70
20 40 60 80 100 120 140 160 180 200 220 240
60
80
100
120
140
160
40
20
00 200 400 800 1000 1400 16001200600
0
m
gpm
L/sec
0m3/hr
ft
GOMAX 4220
GOMAX 6220
0
5
15
10
20
25
30
35
40
45
10 20 30 40 50 60 70 80 90 100
40 80 120 160 200 240 280 320 360
50
60
70
80
40
30
20
10
00 100 200 400300 500 700600
0
202224
18161412108642
m
gpm
L/sec
0
5 10 15 20 25 30 35 40
m3/hr
ft
GOMAX 337GOMAX 437
0
20 40 60 80 100 120 140
60
80
100
120
40
20
00 200 400 800 1000 14001200600
0
m
gpm
L/sec
0m3/hr
ft
GOMAX 4110
GOMAX 6110
0
5
10
15
20
25
30
35
10 20 30 40 50 60 70 80
30 60 90 120 150 180 210 240 270
GOMAX 455 655
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 5.5 kW 5.5 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 810 mm 810 mm
Diameter Ø 693 mm Ø 752 mm
Weight 132 kg 138 kg
GOMAX 4150 6150
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 15 kW 15 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 803 mm 803 mm
Diameter Ø 753 mm Ø 813 mm
Weight 178 kg 186 kg
GOMAX 475 675
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 7.5 kW 7.5 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 810 mm 810 mm
Diameter Ø 693 mm Ø 752 mm
Weight 142 kg 148 kg
GOMAX 4220 6220
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 22 kW 22 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 1007 mm 1007 mm
Diameter Ø 808 mm Ø 867 mm
Weight 256 kg 262 kg
GOMAX 337 437
Outlet 3" (80 mm) 4" (100 mm)
Rated Output 3.7 kW 3.7 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 673 mm 673 mm
Diameter Ø 580 mm Ø 589 mm
Weight 94 kg 97 kg
GOMAX 4110 6110
Outlet 4" (100 mm) 6" (150 mm)
Rated Output 11 kW 11 kW
Shaft Speed 1450 rpm 1450 rpm
Solid Passage 76 mm 76 mm
Height 803 mm 803 mm
Diameter Ø 753 mm Ø 813 mm
Weight 167 kg 175 kg
GOMAX 475 675 GOMAX 4220 6220
28 29
GOVOX SERIES VORTEX SEWAGE PUMPS
● GOVOX series features its vortex impeller coupled with a wide pump casing. The rotation of the impeller produces a whirling, centrifugal action between the impeller and pump casing. The action enables large solids and fibrous matters to be pumped out without obstruction, leading to less impeller wear and longer pump life.
● Guide rail fittings are available on request.
GOVOX-S SERIES VORTEX & AGITATOR PUMPS
● GOVOX-S series pumps are equipped with an agitator, which forcibly agitates the fluid for easy and efficient transmission of sludge, sand, mud, and debris.
● The agitator prevents air lock that tends to take place on vortex pumps.
GOVOX 204
10
15
20
25
30
5
00 10 20 40 50 70 806030
0
m
gpm
L/sec
0m3/hr
ft
GOVOX 204
0
1
6
5
7
8
9
2
3
4
1 2 3 4 5
4 8 12 16
GOVOX 204
Outlet 2" (50 mm)
Rated Output 0.4 kW
Shaft Speed 2850 rpm
Solid Passage 32 mm
Height 396 mm
Diameter Ø 243 mm
Weight 13.5 kg
GOVOX-G 455 475
GOVOX-U 322 337
GOVOX-U 455 475
100
120
80
60
40
20
00 50 100 150 200 250 300 350 450400 500
0 10 155 20
14
12
10
8
6
4
2
m
gpm
L/sec
0 20 40 60 100m3/hr
ft
GOVOX-G 455
GOVOX-G 475
0
3025
80
60
50
40
30
20
10
00 50 100 150 200 250 300 350
0 2 4 6 8 10 12 14 16 18 20 22
18
16
14
12
10
8
6
m ft
GOVOX-U 322
GOVOX-U 337
0
2
4
0 10 20 40 50 60 70 8030
gpm
L/sec
m3/hr
106
79
92
66
53
40
26
13
00 47 95 142 190 237 284 332 380 427 474
0 3 6 9 12 15 18 21 24 27 30
24
28
32
20
16
12
8
m ft
GOVOX-U 455
GOVOX-U 475
0
4
gpm
L/sec
m3/hr 0 20 60 10040 80
GOVOX 208 315
25
30
35
40
45
50
20
15
10
5
00 20 40 60 100 120 140 16080 180
0 2 31 4 6
10
8
6
4
2
2
m
gpm
L/sec
0 5 10 15 25 30m3/hr
ft
GOVOX 208
GOVOX 315
0
14
7 118 9 105
20
GOVOX-G 322 337 437
50
60
70
80
40
30
20
10
00 50 100 150 250200 300
0 4 62 8 12
20
1816
1412108642
m
gpm
L/sec
0 10 20 30 40 50 60 70m3/hr
ft
GOVOX-G 322
GOVOX-G 437
0
2224
14 181610
GOVOX-G 337
GOVOX-G 322 337 437
Outlet 3" (80 mm) 3" (80 mm) 4" (100 mm)
Rated Output 2.2 kW 3.7 kW 3.7 kW
Shaft Speed 2850 rpm 2850 rpm 2850 rpm
Solid Passage 47 mm 52 mm 52 mm
Height 643 mm 643 mm 643 mm
Diameter Ø 464 mm Ø 464 mm Ø 464 mm
Weight 59.5 kg 64 kg 64 kg
GOVOX 208 315
Outlet 2" (50 mm) 3" (80 mm)
Rated Output 0.75 kW 1.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 37 mm 50 mm
Height 474 mm 502 mm
Diameter Ø 243 mm Ø 302 mm
Weight 19.5 kg 24 kg
GOVOX-S 322 337
60
70
80
50
40
30
20
10
00 50 100 150 200 250 300
24
16182022
141210
86
m ft
GOVOX-S 322
GOVOX-S 337
024
0 10 20 30 40 50 60 70
0 2 4 8 10 12 14 166 18
gpm
L/sec
m3/hr
GOVOX-G 455 475
Outlet 4" (100 mm) 4" (100 mm)
Rated Output 5.5 kW 7.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 52 mm 52 mm
Height 695 mm 717 mm
Diameter Ø 464 mm Ø 464 mm
Weight 72.5 kg 75 kg
GOVOX-U 455 475
Outlet 4" (100 mm) 4" (100 mm)
Rated Output 5.5 kW 7.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 55 mm 55 mm
Height 720 mm 754 mm
Diameter Ø 255 mm Ø 255 mm
Weight 60 kg 67 kg
GOVOX-U 322 337
Outlet 3" (80 mm) 3" (80 mm)
Rated Output 2.2 kW 3,7 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 55 mm 55 mm
Height 655 mm 712 mm
Diameter Ø 255 mm Ø 255 mm
Weight 40 kg 49 kg
GOVOX-S 322 337
Outlet 3" (80mm) 3" (80mm)
Rated Output 2.2kW 3.7kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 13mm 13mm
Height 600mm 657mm
Diameter Ø373mm Ø383mm
Weight 43kg 53kg
GOVOX 315 also available in 230 Volt (S).Also available with float switch (A).
Also available with float switch (A).
30 31
GUIDE RAIL FITTING SYSTEMS
The guide rail fitting system connects the pump to and from the piping simply just by lowering and elevating the pump. The mechanism allows easy maintenance and inspection without the need to enter the sump.
Pump models used in combination with the guide rail fitting system can be identified by the following index and reference.
31
Guide Rail Type Applicable Models
GRL-02GOVOX 204/208
X-VOX 208/215
GRL-02F GOCUT 208/215
GRL-03FGOCUT 315
GOVOX 315
GRF-03GOCUT 322/337
GOVOX-G 322/337
GRF-04GOCUT 437
GOVOX-G 437/455/475
GRN-03 GOMAX 322/337/437
GRN-04
GOMAX 455/655/475/675
GOMAX 475/675
GOMAX 4110/6110
GOMAX 4150/6150
GOMAX 4220/6220
Guide rail system includes:• Stainless steel upper holder.• 5 meter stainless steel chain.• Required fixtures.
32 33
HANDY & RESIDUEPUMPSSimple Structure, Real Quality
Designed for light weight, excellent performance, low energy consumption,
and easy maintenance, PRORIL’s submersible handy and residue pumps
serve a wide range of pumping applications on utility, construction, industrial,
and municipal job sites.
32 33
34 35
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100 110 120 130
16
18
14
12
10
8
6
m ft
SMART 1500
02
4
20
0 4 8 16 20 2412 28
0 1 3 4 52 6 7 8
gpm
L/sec
m3/hr
40
30
35
25
20
15
10
5
00 10 20 30 40 50 60 70
12
10
8
6
m ft
SMART BASE 400 (2")
SMART BASE 400 (1")
0
2
4
0 4 8 1612
0 1 3 42
gpm
L/sec
m3/hr
SMART 1500
Outlet 2" (50 mm)
Rated Output 1.5 kW
Shaft Speed 2850 rpm
Solid Passage 9 mm
Height 432 mm
Diameter Ø 225 mm
Weight 23.5 kg
SMART BASE 400
Outlet 1" (25 mm) 2" (50 mm)
Rated Output 0.4 kW
Shaft Speed 2850 rpm
Solid Passage 2 mm
Height 337 mm
Diameter Ø 206 mm
Weight 14 kg
SMART BASE 400
2
3
84
7
8
9
5
6
1
1 Watertight Cable Entry The cable entry employs an anti-wicking block where
each conductor is stripped and encapsulated in epoxy.
This feature effectively prevents water from penetrating
the motor chamber when the cable end is submerged
or the cable sheath is damaged.
2 Top Discharge and Double Housing Design Designed to construct a water jacket that provides
maximum motor cooling effect for continuous operation
at low water level, this feature forms the cylindrical and
slim shape of the pump and enables the pump to be
installed in confined spaces.
3 Motor Protector The motor incorporates a circle thermal protector which
protects against overheating and dry-run.
4 Submersible Motor Air filled motor, housed in a watertight casing, conforms
to Class F insulation.
5 C3 Ball Bearings and Hardened SS Shaft High quality of C3 ball bearings and the well-balanced, hardened
stainless steel shaft enhance stability during continuous pumping
operations.
6 Double Mechanical Seals Located in the oil chamber, the device is made of quality
materials with highly wear-resistant silicon carbide in lower side
that provides extra protection against leakage and dry-run.
7 Extra Protection for Mechanical Seals and Shaft Lip seals and shaft sleeves are utilized for additional protection
against wear.
8 Durable Outer Jacket and Strainer The outer housing and strainer made of 304 stainless steel
provide impact resistant to harsh handling and conditions.
9 Food Grade Lubricant PRORIL adopts eco-friendly lubricant to minimize environmental
impacts.
FEATURESAnti-wicking
SMART 400 750
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
16
18
14
12
10
8
6
m ft
SMART 400
SMART 750
0
2
4
0 2 4 6 12 14 168 10 18
0 1 3 4 52 6
20 22
gpm
L/sec
m3/hr
SMART 400 750
Outlet 2" (50 mm) 2" (50 mm)
Rated Output 0.4 kW 0.75 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 5.5 mm 7 mm
Height 329 mm 356 mm
Diameter Ø 184 mm Ø 184 mm
Weight 12.5 kg 14 kg
SMART 1500
SMART SERIESHANDY & RESIDUE PUMPS
Compact, lightweight and easy to use, the SMART series pumps deliver high performance for their size.
These small but effective dewatering pumps are easily maintained and perfect for a variety of applications,
such as small construction sites, rental industries, and municipal jobs.
34
Also available with float switch (A).
Also available in 230 Volt (S).
36 37
SMART LITE 400
SMART LITE BASE 400
40
30
35
25
20
15
10
5
00 10 20 30 40 50 60 70
12
10
8
6
m ft
SMART LITE 400
0
2
4
0 4 8 1612
0 1 3 42
gpm
L/sec
m3/hr
40
30
35
25
20
15
10
5
00 10 20 30 40 50 60 70 80
0 1 2 3 4 5
12
1011
89
67
45
m ft
SMART LITEBASE 400 (2")
SMART LITEBASE 400 (1")
0123
0 2 8 10 12 164 6 14
gpm
L/sec
m3/hr
50
60
40
30
20
10
00 10 20 30 40 50 60 70 80 90
12
14
16
18
10
8
6
m ft
SMART LITE 750
0
2
4
0 2 10 184 6 8 12 14 16
0 1 3 52 4
gpm
L/sec
m3/hr
SMART LITE
Small, lightweight and cost-effective, the SMART LITE pumps perform an excellent job for their size. These
small but effective dewatering pumps are easily maintained and perfect for a variety of applications, such as
small construction sites, rental industries, and municipal jobs.
FEATURES● Watertight cable entry prevents water incursion from the capillary wicking.
● Multi-Direction Discharge can be changed between vertical and horizontal ways.
● Slim line design allows access into limited space.
● Double housing forms a water jacket to greatly cool the motor.
● A thermal protector is used on the motor to protect against overheating and dry-run.
● Air filled motor, housed in a watertight casing, conforms to Class F insulation.
● C3 Ball Bearings and Hardened SS Shaft enhance stability during operation.
● Mechanical Sic Seal in lower side provides extra protection against leakage and dry-run.
● A Lip Seal works as an extra protection for mechanical seal from wear.
● PU Impeller is adopted for easy maintenance.
● Food Grade Lubricant helps minimizing environmental impacts.
SMART LITE 750
SMART LITE 400
Outlet 2" (50 mm)
Rated Output 0.4 kW
Shaft Speed 2850 rpm
Solid Passage 5.5 mm
Height 308 mm
Diameter Ø 205 mm
Weight 7.5 kg
SMART LITE BASE 400
Outlet 1" (25 mm) 2" (50 mm)
Rated Output 0.4 kW
Shaft Speed 2850 rpm
Solid Passage 2 mm
Height 304 mm
Diameter Ø 206 mm
Weight 10,5 kg
SMART LITE 750
Outlet 2" (50 mm)
Rated Output 0.75 kW
Shaft Speed 2850 rpm
Solid Passage 7 mm
Height 348 mm
Diameter Ø 205 mm
Weight 12.5 kg
37
Also available with float switch (A).
Also available with float switch (A).
38 39
3
5
6
7
2
4
9
8
1
1 Watertight Cable Entry
Watertight cable entry prevents water incursion from
the capillary wicking.
2 Durable Outer Housing
The outer housing made of 304 stainless steel provides
impact resistant to harsh handling and conditions.
3 Motor Protector
The motor incorporates a miniature thermal protector
which protects against overheating and dry-run.
4 Submersible Motor
Air filled motor, housed in a watertight casing, conforms
to Class F insulation.
5 Stainless Steel 304 Motor Housing
The material provides superior corrosion resistance.
6 C3 Ball Bearings and Hardened SS Shaft
High quality of C3 ball bearings and the well-balanced, hardened
stainless steel shaft enhance stability during continuous pumping
operations.
7 Mechanical Seal
The premium mechanical seal provides extra protection against
leakage and longer life span.
8 Impact-resistant Nylon pump casing and
suction grid
Lightweight design and corrosion-resistance.
9 Food Grade Lubricant
PRORIL adopts eco-friendly lubricant to minimize
environmental impacts.
FEATURES
SAVVY SERIESHANDY & RESIDUE PUMPS
The SAVVY series pumps are suitable for a variety of domestic applications, including draining basements
and garages, emptying swimming pool and fountains, gardening, and hobby applications in general.
SAVVY 150
25
20
10
15
5
00 2 4 6 8 10 12 14 16 18 20
0 0,2 0,4 0,6 0,8 1 1,2
6
7
4
5
m ft
SAVVY 150
0
1
2
3
gpm
L/sec
m3/hr 0 0,5 1 1,5 3 42 2,5 3,5
SAVVY 150
FEATURES
● Compact, lightweight, and easy-to-use design● SAVVY 150 : Aluminum alloy outer case with lightweight top cover, impeller, and suction grids.● Air filled motor with Class F insulation.● Thermal protection on motor.● Built-in high torque capacitor.● Triple seals design. ● Removable filter screen for easy maintenance.
SAVVY 150
Outlet 1" (25 mm)
Rated Output 0.15 kW
Shaft Speed 2850 rpm
Solid Passage 6 mm
Height 273 mm
Diameter Ø 132 mm
Weight 3.2 kg
38
Also available with float switch (A).
40 41
SAVVY 300 600
30
35
40
25
20
15
10
5
00 10 20 30 40 50 60 70 80
12
10
8
m ft
SAVVY 300
SAVVY 600
0
2
4
6
0 2 4 6 12 148 10 16 18
0 1 3 42 5
gpm
L/sec
m3/hr
30
35
25
20
15
10
5
00 10 20 30 40 50 60 70 80
10
8
9
7
5
3
1
m ft
SAVVY JUMBO 300
SAVVY JUMBO 600
0
2
4
6
0 2 4 6 12 148 10 16 18
0 1 3 42 5
gpm
L/sec
m3/hr
30
35
40
25
20
15
10
5
00 10 20 30 40 50 60 70 80
10
6
2
m ft
SAVVY BASE 300
SAVVY BASE 600
0
4
8
12
0 2 4 6 128 10
0 1 3 42 5
gpm
L/sec
m3/hr
SAVVY 300 600
Outlet 2" (50 mm) 2" (50 mm)
Rated Output 0.25 kW 0.55 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 6 mm 6 mm
Height 307 mm 341 mm
Diameter Ø 244 mm Ø 244 mm
Weight 4 kg 6 kg
SAVVY JUMBO 300 600
Outlet 2" (50 mm) 2" (50 mm)
Rated Output 0.25 kW 0.55 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 35 mm 35 mm
Height 338 mm 372 mm
Diameter Ø 245 mm Ø 245 mm
Weight 4.2 kg 6 kg
SAVVY BASE 300 600
Outlet 1" (25 mm) 2" (50 mm)
Rated Output 0.25 kW 0.55 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 2 mm 5 mm
Height 305 mm 357 mm
Diameter Ø 244 mm Ø 244 mm
Weight 4 kg 6 kg
SAVVY JUMBO 300 600
SAVVY BASE 300 600
41
Also available with float switch (A).
Also available with float switch (A).
Also available with float switch (A).
42 43
PRORIL stainless steel pumps consist of four dewatering pumps and two
sewage pumps. All components in contact with the liquid are made of 304
stainless steel.
STAINLESS STEELPUMPS
42 43
44 45
30
40
50
60
70
20
10
00 20 40 60 80 100 120 140 160 180 200 220
10
6
2
m ft
X-SMART 215
X-SMART 315
0
4
8
12
14
16
18
20
0 4 8 16 3612 20 322824 40 44
0 1 3 42 5 6 7 8 9 10 11 12 13
gpm
L/sec
m3/hr
X-VOX 208 215
2
3
4
6
7
5
8
1
Anti-wicking
X-SMART 400 750
303540
45505560
2520151050
0 10 20 30 40 50 60 70 80 90 100
10
6
2
m ft
X-SMART 400
X-SMART 750
0
4
8
12
14
16
18
0 2 4 6 128 10 14 16 18
0 1 3 42 5 6
gpm
L/sec
m3/hr
30
40
50
60
20
10
00 20 40 60 80 100 120 140
10
6
2
m ft
X-VOX 208
X-VOX 215
0
4
8
12
14
16
18
0 2 6 12 244 8 10 14 16 222018 26 28
0 1 3 42 5 6 7 8
gpm
L/sec
m3/hr
X-SMART 400 750
Outlet 2" (50 mm) 2" (50 mm)
Rated Output 0.4 kW 0.75 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 5.5 mm 7 mm
Height 329 mm 356 mm
Diameter Ø 180 mm Ø 180 mm
Weight 13 kg 14 kg
X-VOX 208 215
Outlet 2" (50 mm) 2" (50 mm)
Rated Output 0.75 kW 1.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 40 mm 37 mm
Height 415 mm 445 mm
Diameter Ø 233 mm Ø 233 mm
Weight 12 kg 15 kg
X-SMART 215 315
Outlet 2" (50 mm) 3" (80 mm)
Rated Output 1.5 kW 1.5 kW
Shaft Speed 2850 rpm 2850 rpm
Solid Passage 7 mm 7 mm
Height 449 mm 449 mm
Diameter Ø 187 mm Ø 187 mm
Weight 19 kg 19 kg
STAINLESS STEEL PUMPSDEWATERING & SEWAGE VORTEX
PRORIL stainless steel pumps consist of four dewatering pumps and two sewage pumps. All components
in contact with the liquid are made of 304 stainless steel.
These pumps are designed for handling clean water or screened wastewater, also applicable to the
aquaculture industry with the use of the food-grade lubricant.
FEATURES
1 Watertight Cable Entry The cable entry employs an anti-wicking block where
each conductor is stripped and encapsulated in epoxy.
This feature effectively prevents water from penetrating
the motor chamber when the cable end is submerged
or the cable sheath is damaged.
2 Top Discharge and Double Housing Design Designed to construct a water jacket that provides
maximum motor cooling effect for continuous operation
at low water level, this feature forms the cylindrical and
slim shape of the pump and enables the pump to be
installed in confined spaces.
3 Motor Protector The motor incorporates a circle thermal protector which
protects against overheating and dry-run.
4 Submersible Motor Air filled motor, housed in a watertight casing, conforms
to Class F insulation.
5 C3 Ball Bearings and Hardened SS Shaft High quality of C3 ball bearings and the well-balanced,
hardened stainless steel shaft enhance stability during
continuous pumping operations.
6 Double Mechanical Seals Located in the oil chamber, the device is made of quality
materials with highly wear-resistant silicon carbide in lower side
that provides extra protection against leakage and dry-run.
7 Extra Protection for Mechanical Seals and Shaft Lip seals and shaft sleeves are utilized for additional protection
against wear.
8 Food Grade Lubricant PRORIL adopts eco-friendly lubricant to minimize
environmental impacts.
X-SMART 215 315
44
Also available with float switch (A).
Also available in 230 Volt (S).
X-Vox 208 also available with float switch (A).X-Vox 215 also available in 230 Volt (S).
46 47
Article number MPP code 28 Setting range Volt Type plug - 32 A
AFMPP03-32 28 2,5 A - 4,0 A 400 CEE 32 A - 5 pole
AFMPP05-32 29 4,0 A - 6,3 A 400 CEE 32 A - 5 pole
AFMPP07-32 30 6,3 A - 10,0 A 400 CEE 32 A - 5 pole
AFMPP09-32 31 10,0 A - 16,0 A 400 CEE 32 A - 5 pole
AFMPP11-32 32 16,0 A - 20,0 A 400 CEE 32 A - 5 pole
AFMPP13-32 33 20,0 A - 25,0 A 400 CEE 32 A - 5 pole
AFMPP15-32 34 25,0 A - 32,0 A 400 CEE 32 A - 5 pole
Article number Max. kW Setting range Volt Type plug - 32 A
AFMPPCWF01-32 7,5 1,6 A - 2,4 A 400 CEE 32 A - 5 pole
AFMPPCWF02-32 7,5 2,4 A - 4,0 A 400 CEE 32 A - 5 pole
AFMPPCWF03-32 7,5 4,0 A - 6,0 A 400 CEE 32 A - 5 pole
AFMPPCWF04-32 7,5 6,0 A - 10,0 A 400 CEE 32 A - 5 pole
AFMPPCWF05-32 7,5 9,0 A - 12,0 A 400 CEE 32 A - 5 pole
AFMPPCWF06-32 7,5 12,0 A - 16,0 A 400 CEE 32 A - 5 pole
AFMPPCWF07-32 15 16,0 A - 20,0 A 400 CEE 32 A - 5 pole
AFMPPCWF08-32 15 20,0 A - 25,0 A 400 CEE 32 A - 5 pole
AFMPPCWF09-32 15 25,0 A - 32,0 A 400 CEE 32 A - 5 pole
Article number No. wire Length mtr. Volt
5600070 2 10 230
5600090 2 20 230
THERMAL AND CURRENT OVERLOAD MOTOR PROTECTOR PLUGS
Standard with phase inverter and sequence indicator.
FLOAT SWITCH SOLUTION FOR 400 VOLT PUMPS TOGETHER WITH THERMAL AND CURRENT
OVERLOAD PROTECTION
To be used in combination with the floatswitches. Auto - 0 - Manual.
FLOAT SWITCH TO BE USED IN COMBINATION WITH MPPCWF PLUGS
ACCESSORIES
PROTECTOR PLUGS
FLOAT SWITCH
GUIDE RAIL FITTING SYSTEMS
The guide rail fitting system connects the pump to and from the piping simply just by lowering and elevating the pump. The mechanism allows easy maintenance and inspection without the need to enter the sump.
Pump models used in combination with the guide rail fitting system can be identified by the following index and reference.
Guide rail system includes:• Stainless steel upper holder.• 5 meter stainless steel chain.• Required fixtures.
Guide Rail Type Applicable Models
GRL-02GOVOX 204/208
X-VOX 208/215
GRL-02F GOCUT 208/215
GRL-03FGOCUT 315
GOVOX 315
GRF-03GOCUT 322/337
GOVOX-G 322/337
GRF-04GOCUT 437
GOVOX-G 437/455/475
GRN-03 GOMAX 322/337/437
GRN-04
GOMAX 455/655/475/675
GOMAX 475/675
GOMAX 4110/6110
GOMAX 4150/6150
GOMAX 4220/6220
48 49
CORRECT INSTALLATION OF THE PUMPS
Although installing PRORIL submersible pumps is fairly straightforward, there are a few basic things that need to
be taken into consideration to ensure optimal performance and to prevent excessive wear and/or damages.
Firstly, it is paramount that the pump is prevented from digging itself into the soil, which is particularly common
on sites with sandy- or clay type soils. This can be achieved by suspending the pump above the bottom of the
casing using a rope/chain in case of deepwell applications, or by placing the pump on a base of some sort
(e.g. wooden plank or coarse gravel) in case of open sump pumping.
Secondly you should prevent tight bends and kinks in the discharge hose at all times. When bent strongly, the
maximum flow capacity of the hose is reduced and it will create additional friction losses and will reduce the
overall flow performance of the pump.
TECHNICAL INFORMATION TECHNICAL INFORMATION
INSTALLATION CHART FOR CALCULATING FRICTION LOSSES IN HOSES
50 51
SEMI-OPEN IMPELLER
An impeller that has no bottom shroud. Liquid which passes through the impeller
is deflected, forming a plain perpendicular to the spindle. Most of submersible
contractors’ pumps employ this type of impeller.
VORTEX IMPELLER
An indented impeller produces a whirling, centrifugal action which allows long
and fibrous material, solid materials, etc. to be pumped without contacting the
impeller.
PERIPHERAL IMPELLER
The impeller has a number of slots on its periphery, and the rotation gives energy
to the liquid. Low volume and high head, and widely used in shallow pumps.
CLOSED IMPELLER
The impeller vanes are enclosed in a unified contruction. Suited for high-head
pumping.
SEMI-OPEN CHANNEL IMPELLER
This type of impeller is designed with single or twin circular shaped vanes.
This construction is effective in the prevention of blockage by solid matters.
AGITATOR
The rigid agitator delivers kinetic energy (energy of motion) to stir solids
surrounding the pump intake, re-suspending them into a fluid state for easy
pumping.
TECHNICAL INFORMATION TECHNICAL INFORMATION
CONVERSION CHARTS TYPE OF IMPELLER
52
PRORIL Pumps Europe BV
Edisonstraat 12a
7006 RD Doetinchem
The Netherlands
P.O. Box 384
7000 AJ Doetinchem
The Netherlands
+31 (0) 314 625 125
www.prorilpumpseurope.com
PRORIL PUMPS COORPORATION
60 Lana 251, Zhongzheng Rd.
Dashe Dist. Kaohsiung 815
Taiwan (R.O.C.)