Submerged Arc Welding Trade Name Spec Grade Current ...web.mit.edu/12.000/www/m2005/a2/8/SAW.pdf ·...

Submerged Arc Welding

Port OfficeCurrent PolarityGradeSpecTrade Name Sizes

ARGENTINA

Conarco Alambres Y Soldaduras S.A.

Buenos Aires4.0 mmDCEP2MABSConarco S1 / Esab OK Flux10.81

Buenos Aires4.0 mmDCEP3MABSConarco S2Si / Esab OKFlux 10.71

AUSTRALIA

Lincoln Electric Co. (Australia) Pty. Ltd.

Sydney2.4 - 4.8 mmDC3YMABSLincolnweld LS-3Wire/880M Flux

Sydney2.0 - 5.6 mmDCEP2T, 3MABSL60 Wire / 761 Flux

Sydney2.0 - 5.6 mmAC1T, 2MABSL60 Wire / 780 Flux

Sydney2.0 - 5.6 mmDCEP2T, 3MABSL60 Wire / 860 Flux

Sydney2.0 - 4.8 mmAC3YTMABSL61 Wire / 780 Flux

Sydney2.0 - 4.8 mmAC3YTMABSL61 Wire / 860 Flux

Welding Industries of Australia

Adelaide2.4 - 4.0 mmAC / DCEP3YMABSAusmatic SD3 / OP121TT

AUSTRIA

Bohler Schweisstechnik Austria GmbH

Essen2.0 - 4.0 mm

Recommended by mfr. for welding austneitic-ferritic steel (Duplex), UNS no. S31803 (and similar) & for welding these alloys toGrade AH36 (C-Mn Steel). Mfr's Guaranteed min., Grade UNS S31803 to AH36: T.S. 500 MPa; ISO-V at -20 °C, 47 J.

DCEPER2209AWS A5.9-93Bohler CN 22/9 N-UP / BB202

Munich2.0 - 5.0 mm

* Intended for use with low alloy high-temp. steels, subject to special approval with each application.

DCEP*Bohler EMS2 CrMo / BB25

Munich4.0 mm

Intended for multirun technique on Grade DH36. Test temp.: -60 °C

DCEPF48A6-EH12KAWS A5.17-97Bohler EMS3 / UV418TT

BRAZIL

Belgo Mineira Bekaert Trefilarias S/A

Sao Paulo3.97 mmDCEPF7A4-EM12K,F48A4-EM12K

AWS A5.17-97BMAS 122 / Flux DX

Sao Paulo3.97 mmDCEPF7A2-EM12K /F48A3-EM12K

AWS A5.17-97BMAS 122 / Flux 105


AWS A5.17-97BMAS 122 / Flux 108

Sao Paulo2.0 - 6.35 mmDCEP3YTMABSBMAS 122 / OK Flux 10.71

II - 129/Oct/2001 Approved Welding Consumables ABS



BRAZIL

CarboOx Resende Quimica Industria e Comercio Ltda.


AWS A5.19M-97BMAS 122 / Flux 105


AWS A5.17-97WM12K / Flux DX

Sao Paulo3.97 mmDCEPF7A2-EM12K /F48A3 -EM12K

AWS A5.17-97WM12K / Flux 105


AWS A5.17-97WM12K / Flux 108

Esab S.A. Industria e Comercio

Sao Paulo2.0 - 6.35 mmDCEP3YTMABSOK Flux 10.71/ OK Autrod12.20

Gerdau S/A Arames para Solda

Sao Paulo3.97 mmDCEPF7A0-EL12AWS A5.17-97Arc-EL12

Sao Paulo1.59 - 4.76mm

DCEP3YMABSOK Flux 10.71/ Gerdau-Arc

CANADA

Air Liquide Canada Inc.

Montreal4.0 mmDCEP2YMABSLA 12K / LA 23




Lincoln Electric Co. of Canada Ltd.

Cleveland0.035 - 5/32in.

F7A0-EM13KAWS A5.17-89L50/781


F7A2-EM13KAWS A5.17-89L50/960

Toronto4.0 mmDCEP3YM, 2YTABSL60 / 761

Cleveland5/64 - 7/32 in.F6A2-EL12AWS A5.17-89L60/760



Cleveland1/16" - 3/16"DCEPF7A2-EM12KAWS A5.17-97L61 / 761



Cleveland1/16" - 3/16"DCEP4M, 4YMABSL61 / 8500






CANADA

Lincoln Electric Co. of Canada Ltd.


CHINA, PEOPLES REPUBLIC OF

Atlantic China Welding Consumables (China Welding Electrode Plant)

Guangzhou4.0 - 5.8 mmAC / DCEP2T, 3MABSH08A / CHF43

Guangzhou4.0 - 5.8 mmAC / DCEP3YMABSH10Mn2 / CHF101

Changzhou Huatong Welding Wire Co., Ltd.

Shanghai2.0 - 5.0 mm

**Note: Wire HTM-10Mn2 to be used together with flux CHF101 manufactured by China Welding Electrode Plant.

DCEP3YMABSHTM-10Mn-2 / CHF101**

Dalian Jinguang Welding Wire Factory

Guangzhou4.0 - 4.8 mm

Maximum plate thickness 18 mm for two-run technique. **Flux manufactured by Longtou Welding Flux Factory approved by ABS

AC2TMABSBSH08A / LT431**

Guangzhou4.0-4.8 mm

Maximum plate thickness 18 mm for two-run technique.

AC2YTMABSBSH08MnA / LT350**

Guangxi Longtou Welding Flux Factory


For two-run technique, application for maximum plate thickness of 20mm.

AC / DC3TMABSJW-2 / LT431


For two-run technique, application for maximum plate thickness of 20mm. Wire JW-2, JW-3 were manufactured by JintaiWelding & Metal Co. Ltd., Jinzhou, PRC.

AC / DC2YTM, 2YMABSJW-3 / LT350

Jiangsu Universe Welding Consumables Group Co., Ltd.

Guangzhou2.0 - 5.0 mmAC / DC3MABSTHSJ201 / TH-08A

Jinzhou Jin Tai Welding & Metal Co. Ltd.

Guangzhou2.4 - 4.8 mmDCEP3YMABSJW-1 / LT350

Guangzhou2.4 - 4.8 mmDCEP3YMABSJW-1 / SJ101

Guangzhou2.4 - 4.8 mmDCEP3MABSJW-2 / LT431


Guangzhou2.4 - 4.8 mmDCEP3YMABSJW-3 / LT350


Shanghai Baogang Metallurgical Construction Corp.


**Wire BHM-1 to be used together with flux SH431 manufactured by Shanghai Welding Electrode Flux Co. Ltd.

AC3MABSBHM-1 (H08A)**


**Wires BHM-4 and BHM-5 to be used together with flux SH331 manufactured by Shanghai Welding Electrode Flux Co. Ltd.

AC2YMABSBHM-4 (H10Mn2)**




CHINA, PEOPLES REPUBLIC OF

Shanghai Baogang Metallurgical Construction Corp.

Shanghai2.0-5.0 mm

**Wires BHM-4 and BHM-5 to be used together with flux SH331 manufactured by Shanghai Welding Electrode Flux Co. Ltd.

AC3YMABSBHM-5 (H10Mn2G)**

Shanghai Welding Equipt & Consumables, Shanghai Welding Elctd Factory

Shanghai3.2 - 5.0 mmAC / DC2YTM, 3YMABSH10 Mn2G / SH331

Shanghai3.0 - 5.0 mmAC / DC2TMABSSH. H8A / SH43

Swan Welding Consumable (Group) Co., Ltd.

Guangzhou4.0 mm

* Meets Mechanical Properties of AWS A5.17-97 F7A4-EH14

AC / DCEP*F7A4-EH 14AWS A5.17-97JH-SJ101 / H10Mn2 (JW-1)

Guangzhou4.0 mmAC / DCEP3YMABSJH-SJ101 / H10Mn2 (JW-1)

Guangzhou4.0 mm

* Meets Mechanical Properties of AWS A5.17-97 F7A0-EL8

AC / DCEP*F7A0-EL8AWS A5.17-97JH-SJ301 / HO8A (JW-2)

Guangzhou4.0 mmAC / DCEP3MABSJH-SJ301 / HO8A (JW-2)

Guangzhou4 mm

* Meets Mechanical Properties of AWS A5.17-97 F7A2-EL8

AC / DCEP*F7A2-EL8AWS A5.17-97JH-SJ501 / HO8A (JW-2)

Guangzhou4.0 mmAC / DCEP2YMABSJH-SJ501 / HO8A (JW-2)

Wuhan Marine Machinery Plant (Wuhan Marine Welding Consumables Factory)


**Wire H08A to be used together with flux HJ431 in accordance with PRC National Standard GB5293-85 and flux manufacturerto be approved by ABS.

AC / DC2MABSH08A**

Zhuzhou Welding Electrode Co., Ltd.


Note: Wire HO8A to be used with flux Brand HJ431 manufactured in accordance with China National Standard GB5293-85 andflux manufacturer to be approved by ABS

DCEP3MABSHO8A

COLOMBIA

Electromanufacturas S.A.

Cartagena1.5 - 4.0 mmDCEP1TMABSWA-60 / 780

Cartagena1.5 - 4.0 mmDCEP1TMABSWA-61 / 780

CZECH REPUBLIC

Esab Vamberk s.r.o.

Pilsen2.5 - 6.0 mmAC / DC2MABSOK Autrod 12.10 / OK Flux10.40

Pilsen2.5 - 6.0 mmAC / DC3M, 3YMABSOK Autrod 12.20 / OK Flux10.40




CZECH REPUBLIC

Esab Vamberk s.r.o.

Gothenburg1.6 - 5.0 mm

**For welding of Duplex stainless steels, Manufacturer's guaranteed min. properties Y.S. 480 N/mm2, T.S. 680 N/mm2, El. 25%,CVN > 47 J @ -20 °C

DCEP**OK Autrod 16.86 / OK Flux10.93

EGYPT

Egyptian Swedish Welding Electrodes Co.

Cairo4 mmAC2YMABSESWECO ES1M / PecoP140

Cairo4 mmAC3YMABSESWECO ES1M / P171

Cairo4 mmAC2MABSES1L / Peco Flux P140

Cairo4 mmAC1YTMES1L / Peco Flux P181

Cairo4 mmAC2YMES1M / Peco Flux P181

FRANCE

Lincoln Electric Company SA Europe

Le Havre4 mmAC / DC3YTMABSIMT9 / 780

Le Havre2.0 - 7.9 mmAC / DC3M, 3YMABSLNS129 / P230

Le Havre3.25 - 5.0 mm

**Manufacturer's guaranteed minimum CVN 47 J at -60 °C.

DCEP3Y400M**ABSLNS133U / P240


**For two run technique, maximum plate thickness of 16 mm.

DCEP3TM, 2YTM**ABSLNS135 / P230

Le Havre2.5 - 4.0 mmDCEP3YM-2YTABSLNS140A / P230

Le Havre2.5 - 5.0 mmAC / DC2YTMABSLNS140A / 761

Le Havre2.5 - 4 mmDCEP3YMABSLNS140A / 8500



DCEP3YM**ABSLNS160 / P230










Le Havre2 - 4 mm

**Mfr's guaranteed properties: Ultimate tensile strength >520 MPa, Yield strength >290 MPa, %Elongation >30, CVN Energy >34J @ -40 °C, Chemistry C <0.04, Mn 0.5-2.5, Si <1, Cr 22-27, Ni 11-14, Mo <0.5

DCEP**LNS309L / P2000S

Le Havre1.6 - 4 mm

**Manufacturer's guaranteed properties: Ultimate tensile strength >550 MPa, Yield strength >290 MPa, %Elongation >30, CVNEnergy >34 J @ -196 °C

DCEPER316L**AWS A5.9-93LNS316L / P2000

Le Havre2.5 - 5.0 mmAC / DC4Y400TABSL50M / 781

Le Havre3.25 - 5.0 mmDCEP3YTMABSL50M / 8500

Le Havre4.0 - 5.0 mmDCEP2T, 2YTMABSL60 / 780




FRANCE

Lincoln Electric Company SA Europe

Le Havre2.0 - 7.9 mmAC / DC3M, 3YMABSL61 / P230

Le Havre4.0 - 5.0 mmDCEP3YM-2YTABSL61 / 761

Le Havre4.0 - 5.0 mmDCEP3TM, 3YM-2YTABSL61 / 860

Le Havre2.5 - 5.0 mmAC / DC2YTMABSL70 / 761

Sauvageau Commercy Soudure

Mulhouse4.0 mmDCEP3YTMABSSP 1000 / CY 95

Mulhouse4.0 mmDCEP3YMABSSP1050 / CY20

Soudure Autogene Francaise

Mulhouse4 mmAC / DCEP3YMABSAS 36 / AS 80

Mulhouse2.4 - 5.0 mmAC / DCEP3YMABSAS 40A / AS 461

Mulhouse2.0 - 4.8 mmDCEP3YMABSAS 450 / AS 35

Mulhouse3.2 mm

**Manufacturer's guaranteed properties: 750-900 MPa tensile strength; 550 MPa min. yield strength; 24% min. elongation; CVN40 J min. at -30 °C. Typical properties: 820 MPa TS; 710 MPa YS; 26% El.; 60 J CVN @ -40 °C

AC / DC**Lexal S-22-9-3N / LexalF-500

GERMANY

Drahtwarenfabrik Drahtzug Stein GmbH & Co. KG

Essen1.6 - 4.0 mmDCEP3YMABSSDA S2 / ST55

Essen1.6 - 4.0 mmDCEP3YMABSTopcore 731 B / ST55

Essen4.0 mm

Maximum plate thickness of 20 mm for two-run technique

DCEN3YTMABSTopcore 735 B / 2D / SDA2 /ST55

Oerlikon Schweisstechnik GmbH

Venice2.4 - 5.0 mmDCEP3MABSFLUXOCORD 31 / OP121TT

Venice2.4 - 4.0 mm

For two-run technique maximum plate thickness 20 mm.

DCEP2YT, 3YMABSFLUXOCORD 31 / OP 180S

Essen3.2 - 5.0 mm

Two-wire tandem technique, limited to 25 mm plate thickness.

AC / DCEP3YTABSOE-A 105 / FLUXOCORD35.25-2D / OE-A 105 / OP122

Essen3.2 - 5.0 mm

Two-wire tandem technique, limited to 25 mm plate thickness.

AC / DCEP3YTABSOE-A 105 / FLUXOCORD35.25-2D / OE-A 105 / OP122 FB

Essen3.2 - 5.0 mm

Three-wire tandem technique. Two-run welding limited to 25 mm plate thickness.

AC / DCEP3YTMABSOE-A 105 / FLUXOCORD35.25-3D / OE-A 105 / OP122




GERMANY

Oerlikon Schweisstechnik GmbH

Essen3.2 - 5.0 mm

Three-wire tandem technique, limited to 25 mm plate thickness.

AC / DCEP3YTMABSOE-A 105 / FLUXOCORD35.25-3D / OE-A 105 / OP122 FB

Essen4.0 mmDCEP3YMABSOE-SD3 / OP 41TT

Essen2.0 - 6.0 mm

Multi-run technique recommended by manufacturer for low temperature service (-40 °C).

AC / DCEP3YMABSOE-SD3 / OP121TT

Essen4.0 - 5.0 mm

For Grade 2T, application for maximum plate thickness of 20 mm.

AC2TMABSOE-S1 / OP 180S

Essen2.0 - 6.0 mmAC / DCEP1T, 2YMABSOE-S1 / OP 181

Essen4.0 - 5.0 mmAC3YMABSOE-S2 / OP 120TT

Essen2.0 - 5.0 mmAC / DCEP3YTMABSOE-S2 / OP 122

Essen2.0 - 5.0 mmAC / DCEP3YTMABSOE-S2 / OP 122 FB

Essen4.0 - 5.0 mm

For Grade 2YT, application for maximum plate thickness of 20 mm.

AC2YT, 3YMABSOE-S2 / OP 180S

Essen2.0 - 5.0 mm

Two-wire tandem technique; two-run technique limited to 25 mm plate thickness.

AC / DCEP3YT, 3YMABSOE-S2 / OP181

Essen2.0 - 5.0 mm

Two-run technique up to 20 mm plate thickness. Multi-run technique recommended by manufacturer for low temperature service,CVN min. 28 J at -50 °C).

AC / DCEP3YM, 3YTABSOE-S2 Mo / OP121TT

Thyssen Schweisstechnik Deutschland GmbH

Essen2.0 - 4.0 mm

Recommended by mfr. for welding austneitic-ferritic steel (duplex), UNS no. S31803 (and similar) & for welding these alloys toGrade AH36 (C-Mn Steel). Mfr's guaranteed min., Grade UNS S31803 to AH36: T.S. 500 N/mm2; ISO-V @ -20 °C, 47 J.

DCEPER2209AWS A5.9-93Thermanit 22/09 / Marathon431

Essen2.0 - 5.0 mm

The Welding Consumable Manufacturer is qualified in accordance with ABS Quality Assurance Approval

AC / DCEP2M, 2YMABSUnion S2 / UV 306

Essen2.0 - 5.0 mm

Two-run technique limited to max. 20 mm plate thickness.

AC / DCEP3YTMABSUnion S2 / UV 400

Essen2.0 - 5.0 mmAC / DCEP3YT, 4YMABSUnion S2Mo / UV 400

Essen3.0 - 5.0 mmF7P10-ENi2-Ni2AWS A 5.23-97Union S2Ni2.5 / UV 421TT

Essen3.0 - 5.0 mmF8A10-ENi2-Ni2AWS A 5.23-97Union S2Ni2.5 / UV 421TT

HUNGARY

Esab Mor Kft.

Munich4.0 - 5.0 mmAC / DC3TM, 3YTMABSOK Autrod 12.10 / OK Flux10.70

Munich4.0 mmAC / DC3MABSOK Autrod 12.10 / OK Flux10.71

Munich2.5 - 5.0 mmAC / DC1T, 2M / 1YT,2YM

ABSOK Autrod 12.10 / OK Flux10.81

Munich1.6 - 5.0 mmAC / DCEP1YMABSOK Autrod 12.10 / OK Flux10.82




HUNGARY

Esab Mor Kft.

Munich4.0 - 5.0 mmAC / DCEP2T / 3M, 3YMABSOK Autrod 12.20 / OK Flux10.70

Munich4.0 - 5.0 mmAC / DC3M, 3YMABSOK Autrod 12.20 / OK Flux10.71



Munich2.5 - 5.0 mmAC / DC3M, 3YMABSOK Autrod 12.22 / OK Flux10.71


Munich1.6 - 5.0 mmDCEP3TM, 3YTMABSOK Autrod 12.24 / OK Flux10.61


Munich4.0 - 5.0 mmAC / DCEP3TM, 4YTMABSOK Autrod 12.34 / OK Flux10.71

INDIA

Advani Oerlikon Ltd. (Ahmednagar)

Mumbai0.8 - 4.0 mmDCEP2MABSAutomelt Grade A/AutomeltGrade II

Mumbai1.6 - 3.15 mmDCEP3YMABSAutomelt Grade C/AutomeltGrade IV

Esab India Ltd.(Mumbai)

Mumbai3.15 - 5.0mmDC/Positive2MOK Autrod 12.08/OK Flux10.81L

Mumbai2.5 - 5.0 mmDC/Positive3MOK Autrod 12.08L/OK Flux10.71L

Mumbai3.15 - 5.0 mmDC/Positive3YMOK Autrod 12.40L/OK Flux10.71L

INDONESIA

P.T. Karya Yasantara Cakti

Jakarta2.0 - 4.0 mmAC / DC3MABSOK Autrod 12.10 / OK Flux10.71

Jakarta2.5 - 6.0 mmAC / DCEP1T, 2MABSOK Autrod 12.10 / OK Flux10.80

Jakarta2.0 - 6.0 mmAC / DCEP3M, 3YMABSOK Autrod 12.20 / OK Flux10.71

Jakarta2.5 - 6.0 mmAC / DCEP2TM, 2YTMABSOK Autrod 12.20 / OK Flux10.80




INDONESIA

P.T. Karya Yasantara Cakti

Jakarta2.0 - 6.0 mmAC / DCEP3M, 3YMABSOK Autrod 12.22 / OK Flux10.71



ITALY

Esab Saldatura S.p.A.

Milan2.4 - 6.0 mmDCEP3TM, 3YTMABSOK Flux 10.7I / OK Autorod12.24

Milan2.4 - 6.0 mmAC / DCEP3M, 3YMABSOK Flux 10.71 / OK Autorod12.20

Milan2.4 - 6.0 mmAC / DCEP2TM, 2YTMABSOK Flux 10.81 / OK Autorod12.20

ETC Elettrotermochimica S.r.l.

Milan4.8 mmAC / DCEP3YMABSETC FXA 27 SB / ETC AS 2

Milan4.8 mmAC / DC3YTM, 3YMFillet

ABSETC FXA 27 SB / ETC AS 2Mo

Venice2.4 - 6.0 mmDCEP3YMABSETC FX46R / ETC AS2

FRO SRL

Milan2.4 - 4.8 mmAC2T, 2YTABSAS 231 / AS 35

Milan2.4 - 4.8 mmAC3Y FilletABSAS 231 / AS 36

Milan2.4 - 4.8 mmAC / DCEP3YMABSAS 461 / AS 35

Milan2.4 - 4.8 mmAC2YTABSAS 461 / AS 35

Milan2.4 - 4.8 mmAC / DCEP3YMABSAS 461 / AS 40A

Milan2.4 - 4.8 mmAC / DCEP3YM FilletABSAS 461 / AS 40A

Milan2.4 - 4.8 mmAC3YTABSAS 461 / AS 40A

Milan2.4 - 4.8 mmAC3Y (One Side)ABSAS 461 / AS 67

Venice2.4 - 5.0 mmDCEP3MABSFluxocord 31 / OP 121 TT

Venice2.4 - 4.0 mm

For two-run technique maximum plate thickness 20 mm.

DCEP3YM, 2YTABSFluxocord 31 / OP 180 S

JAPAN

Kawasaki Steel Corp.

Yokohama4.0 - 6.4 mm

Manufacturer's guaranteed min. CVN 27 J at -60 °C

AC3YTABSKW-101B (X2) / KB-110


Manufacturer's guaranteed min. CVN 27 J at -60 °C

AC3TM, 3YTMABSKW-101B / KB-110




JAPAN

Kawasaki Steel Corp.

Yokohama2.4 - 6.4 mmAC3TMABSKW-43 / KB-14

Yokohama2.4 - 6.4 mmAC3TM, 3YTMABSKW-43 / KB-50

Yokohama2.4 - 6.4 mmAC2YTABSKW-43B / KB-155

Kobe Steel Ltd., Fukuchiyama Plant

Kobe3.2 - 6.4 mm

^ Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Approval subject to satisfactory procedure tests at user's plant.Plate thickness to be welded: Maximum 20 mm. Suitable for one side welding.

AC/AC orAC/DCEP

4Y400ÂBSUS-255 (X2) / PFI-50LT /Metal Powder RR-3

Kobe3.2 - 6.4 mm

^ Manufacturer's guaranteed CVN 3.5 Kgf-m -60 °C. Suitable for one-side welding with twin or triple wires.

AC / DCEP3^, 3YÂBSUS-255 / PFI-50LT

Kobe3.2 - 6.4 mm

^ Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Approval subject to satisfactory procedure tests at user's plant.Plate thickness to be welded: Maximum 16 mm. Suitable for one side welding.

AC4Y400ÂBSUS-255 / PFI-50LT / MetalPowder RR-3

Kobe4.0 - 6.4 mmAC2T, 2YTABSUS-36 (X2) / PFH-52

Kobe2.4 - 6.4 mm

**Manufacturer's guaranteed minimum CVN 34 J at -60 °C

AC/DCEP orAC/AC

4YM**ABSUS-36 (X2) / PFH-55LT

Kobe4.0 - 6.4 mmAC / DCEP3^, 3YÂBSUS-36 (X4) / PFI-55E

Kobe2.4 - 7.9 mmAC1TABSUS-36 / G-60

Kobe2.0 - 6.4 mmAC2MABSUS-36 / G-80

Kobe1.6 - 6.4 mmAC2T, 3M, 2YT,3YM

ABSUS-36 / MF-300

Kobe2.4 - 7.9 mmAC / DCEP2T, 3M, 2YT,3YM

ABSUS-36 / MF-38

Kobe2.4 - 7.9 mmAC / DCEP3*ABSUS-36 / MF-38 / MetalPowder RR-2

Kobe1.6 - 6.4 mmAC2T, 2YTABSUS-36 / MF-44

Kobe1.6 - 4.8 mm

For fillet welding only.

AC2T, 2YTABSUS-36 / MF-53

Kobe4.0 - 6.4 mmAC2T, 2YTABSUS-36 / PFH-52

Kobe2.0 - 6.4 mmAC3TM, 3YTM,3Y400TM

ABSUS-36 / PFH-55E

Kobe2.0 - 6.4 mm

**Manufacturer's guaranteed min. CVN 5.5 kgf-m at -60 °C.

AC3M, 3YM**ABSUS-36 / PFH-55LT

Kobe2.4 - 7.9 mm

For use with one-side single or tandem process.

AC3*, 3Y*ABSUS-36 / PFI-52E / MetalPowder RR-2

Kobe2.4 - 7.9 mmAC3*, 3Y*ABSUS-36 / PFI-52N / MetalPowder RR-2

Kobe2.4 - 7.9 mm

For use with one-side single or tandem process.

AC / DCEP3*, 3Y*ABSUS-36 / PFI-55E

Kobe2.4 - 7.9 mmAC / DC2^, 2YÂBSUS-36 / US-43 (X2) / PFI-50/ Metal Powder RR-5




JAPAN

Kobe Steel Ltd., Fukuchiyama Plant

Kobe4.8 - 6.4 mmAC / DCEP2^, 2YÂBSUS-36 / US-43 (X2) /PFI-50M / Metal PowderRR-2

Kobe3.2 - 4.8 mm

**Manufacurer's guaranteed minimum CVN 41J at -60 °C. Plate thickness to be welded: Maximum 20 mm

AC/AC orAC/DCEP

4Y400T**ABSUS-40 (X2) / PFH-55LT

Kobe3.2 - 4.8 mm

**Manufacturer's guaranteed minimum CVN 3.0 kgf-m (29 J) at -60 °C.

AC3T, 3YT**ABSUS-40 / MF-100N

Kobe2.4 - 4.8 mm

**Manufacturer's guaranteed multi-run technique weld metal minimum properties: T.S. 608-735 MPa, Y.P. 490 MPa, El. 20%,CVN 3.5 kgf-m (34 J) at -30 °C.

AC**ABSUS-40 / MF-38

Kobe3.2 - 4.8 mm

**Manufacturer's guaranteed minimum CVN 3.5 kgf-m at -60 °C. Maximum plate thickness 25 mm with single or tandemprocess.

AC3T, 3YT**ABSUS-40 / PFH-50LT

Kobe3.2 - 4.8 mm

**Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Plate thickness to be welded: Maximum 20 mm

AC4Y400T**ABSUS-40 / PFH-55LT

Kobe2.4 - 7.9 mm

For one-side tandem welding process.

AC / DCEP3^, 3YÂBSUS-43 (X2) / PFI-52 / MetalPowder RR-2

Kobe2.4 - 7.9 mmAC3TMABSUS-43 / PFH-45

Kobe2.4 - 7.9 mmAC / DCEP3TM, 3YTMABSUS-43 / PFH-60A

Kobe2.4 - 7.9 mmAC3TMABSUS-43 / PFI-45

Kobe2.4 - 7.9 mmAC / DC3ÂBSUS-43 / PFI-45 / MetalPowder RR-2

Kobe2.4 - 7.9 mmAC / DCEP3TM, 3YTMABSUS-43 / PFI-50

Kobe2.4 - 7.9 mmAC / DC3^, 3YÂBSUS-43 / PFI-50 / MetalPowder RR-2

Kobe2.4 - 6.4 mmAC3YTMABSUS-49 / MF-38

Kobe2.4 - 6.4 mm

^ Manufacturer's guaranteed CVN 3.5 Kgf-m at -30 °C. Suitable for one-side welding with multiple wire.

AC / DCEP3^, 3YÂBSUS-49 / PFH-55E

Kobe Steel Ltd., Ibaraki Plant

Kobe4.8 - 6.4 mm

^ One-side welding; approval subject to satisfactory procedure tests at user's plant

AC / DC3^, 3YÂBSUS-36 (X2) / PFH-55EM /PFI-50R

Kobe4.8 - 6.4 mm

^ One-side welding; approval subject to satisfactory procedure tests at user's plant

AC / DC3^, 3YÂBSUS-36 (X3) / PFH-55EM /PFI-50R

Nippon Steel Welding Products & Engineering Co., Ltd. Narashino Plant

^ Approval subject to satisfactory procedure tests at user's plant.

x


Consumable nozzle (8 - 12 mm size) electroslag welding of plates without intentionally added Nb.

AC / DCEP3^, 3YÂBSNittetsu NES-53 / NittetsuSES-15 / Nittetsu YF-15




JAPAN



Suitable for one side welding with tandem arc process

AC2^, 2YÂBSNittetsu Y-A (X2) / NittetsuNSH-50 / Nittetsu NSH-1R


^ Suitable for one side welding with tandem arc process

AC2^, 2YÂBSNittetsu Y-A (X3) / NittetsuNSH-50/1R


^ Suitable for use with multi-arc tandem one-side welding.

AC2^, 2YÂBSNittetsu Y-A (X4) / NittetsuNSH - 50/1R

Yokohama2.4 - 8.0 mmAC3TMABSNittetsu Y-A / NittetsuYB-100

Yokohama2.4 - 8.0 mmAC3TM, 3YTMABSNittetsu Y-A / NittetsuYB-150

Yokohama2.4 - 8.0 mmAC3TMABSNittetsu Y-B / Nittestu YF-15

Yokohama2.4 - 8.0 mmAC3TMABSNittetsu Y-C / Nittestu YF-15


^ Suitable for use with multi-arc tandem one-side welding

AC2^, 2YÂBSNittetsu Y-C/ Nittetsu Y-A/Nittetsu Y-A/ NittetsuNSH-50/1R


Consumable nozzle (8 - 12 mm) electroslag welding.

AC / DCEP2^, 2YÂBSNittetsu Y-CM / NittetsuSES-15 / Nittetsu YF-15

Yokohama2.4 - 8.0 mmAC3TM, 3YTMABSNittetsu Y-CM / NittetsuYF-15


Consumable nozzle (8 - 12 mm) electroslag welding.

AC / DCEP2ÂBSNittetsu Y-CS / NittetsuSES-15 / Nittetsu YF-15


Suitable for use with single or tandem wire automatic process.

AC3TM, 3YTMABSNittetsu Y-D / NittetsuNB-55E

Yokohama4.8 mm

**Manufacturer's guaranteed avg. CVN 40 J at -60 °C.

AC3M, 3YM**ABSNittetsu Y-D / NittetsuNB-55L


Maximum plate thickness of 20 mm for two-run technique.

AC3TM, 3YTMABSNittetsu Y-D / Nittetsu NF-1


Maximun plate thickness of 20 mm for two-run technique.

AC3TM, 3YTMABSNittetsu Y-D / NittetsuNF-310

Yokohama2.4 - 8.0 mmAC2T, 3M, 2YT,3YM

ABSNittetsu Y-D / Nittetsu YF-15

Yokohama1.2 - 8.0 mmAC2M, 2YMABSNittetsu Y-D / NittetsuYF-800

Yokohama2.4 - 6.4 mmAC3M, 3YMABSNittetsu Y-DL (X2) / NittestuYF-15

Yokohama2.4 - 6.4 mmAC3M, 3YMABSNittetsu Y-DL / NittestuYF-15

Yokohama2.4 - 4.8 mmAC3TM, 3YTMABSNittetsu Y-E / NittetsuNF-310




JAPAN



Manufacturer's guaranteed minimum properties, CVN 3.0 kgf-m at -60 °C. For two run technique, maximum plate thickness of 20mm.

AC3TM, 3YTMABSNittetsu Y-E / NittetsuNF-310


**Manufacturer's guaranteed multi-run technique weld metal minimum properties: T.S. 785 N/mm2, Y.S. 690 N/mm2, El. 16.0%,CVN 50 J at -60 °C

AC**Nittetsu Y-80M / NittetsuNB-250H

Nippon Welding Rod Co., Ltd. (Hamakita)

Yokohama4.0 mmACER316LAWS A5.9-93WEL SUB 316L / WEL SUBF-6

Sumikin Welding Industries, Ltd., Kashiwa Plant


**Mfr's guaranteed min. properties and chemical composition (%) of deposited metal: T.S 590 N/mm2, Y.S 320 N/mm2, EL.22%.

AC**#W-316L / #BS-29T


For grade 2T, applicable to a maximum plate thickness of 30 mm.

AC2TM, 2YTMABS#W-36 / #100

KOREA

Chosun Steel Wire Co., Ltd. (Ulsan)

Ulsan2.4 - 4.8 mmDCEPER308LAWS A5.9-93UC308L / PFS-1

Ulsan2.4 - 4.8 mmDCEPER316LAWS A5.9-93UC316L / PFS-1

Chosun Steel Wire Company

Ulsan2.4 - 6.4 mmAC / DCEPF7A(P)6-EM12KAWS A.5.17-97UC-12K / CA-526

Ulsan2.4 - 6.4 mmAC / DCEP3TM, 3YTMABSUC-12K / CA-526

Ulsan2.4 - 6.4 mmAC / DCEP3TM, 3YTMABSUC-36 / CA-502

Ulsan2.4 - 6.4 mmAC / DCEPF7A(P)2-EH14AWS A.5.17-97UC-36 / CA-502

Ulsan2.4 - 6.4 mmAC / DCEPF7A(P)8-EH14AWS A.5.17-97UC-36 / CA-508



Ulsan2.4 - 6.4 mmAC / DCEPF7A(P)4-EL8AWS A.5.17-97UC-43 / CA-514

Pusan2.4 - 6.4 mmAC / DCEP2TMABSUC36 / CF50

Pusan2.4 - 6.4 mmAC / DCEP3TM, 3YTMABSUC36 / MF-38

Hanswel Co., Ltd.

Ulsan2.0 - 6.0 mm

For two-run technique, maximum plate thickness of 20 mm.

AC / DCEP2TM, 2YTMABSSW-H14 / FA-77HS




KOREA

Hyundai Welding Co., Ltd.

Ulsan1.2 - 3.2 mmAC / DCEP3YMABSH-14 (X2) / S-777 MXH

Ulsan2.0 - 6.4 mm

**For one-side welding technique

AC / DCEP2, 2Y**ABSH-14 / S-705.EF / IRN /S-22

Ulsan2.0 - 6.4 mmAC / DCEP3TM, 3YTMABSH-14 / S-707 TP

Ulsan2.0 - 6.4 mm

**Manufacturer's guaranteed minimum CVN 3.5 kgf-m at -62 °C.

AC / DCEP3M, 3YM**ABSH-14 / S-717 ULT

Ulsan1.6 - 6.4 mmAC / DCEP2M, 2YMABSH-14 / S-777 MX

Ulsan1.6 - 6.4 mmAC / DCEPF7AZ-EH-14AWS A5.17-97H-14 / S-777 MX

Ulsan1.2 - 6.4 mmAC / DCEP2T, 2YT, 3M,3YM

ABSH-14 / S-777 MXH

Ulsan2.0 - 6.4 mm

**Manufacturer's Guaranteed Min. CVN 3.5 Kgf-m at -62 °C. Suitable for Tandem Arc Welding.

AC / DCEP3T, 3YTM, 3M,3YM**

ABSH-14 / S-787 TB

Ulsan1.6 - 6.4 mmAC / DCEP3M, 4YMABSH-14 / Superflux 787

Ulsan1.6 - 6.4 mmAC / DCEPF7A8-EH14,F7P8-EH14

AWS A5.17-97H-14 / Superflux 787

Ulsan1.6 - 6.4 mmAC / DCEP3M, 4YMABSH-14L / Superflux 787

Ulsan1.6 - 6.4 mmAC / DCEPF7A8-EG-GAWS A5.23-97H-14L / Superflux 787

Ulsan2.0 - 6.4 mmAC / DCEP3M, 3YMABSH14 / S-737

Ulsan1.6 - 6.4 mmAC / DCEPF7A0-EL8,F7P0-EL8

AWS A5.17-97L-8 / Superflux 70H

Ulsan1.6 - 6.4 mmAC / DCEPF7A2-EL12AWS A5.17-97L12 / S-727

Ulsan1.6 - 6.4 mm

**Two-run technique: Max. 5.0 mm dia.

AC / DCEP2TM, 2YTM**ABSL12 / S-727

Ulsan1.6 - 6.4 mmAC / DCF7P4-EL8,F7A4-EL8

AWS A5.17-89L8 / S-707

Ulsan1.6 - 6.4 mmAC / DC3TM, 3YTMABSL8 / S-707

Ulsan2.4 - 6.4 mm

**For one-side welding technique.

AC / DCEP2, 2Y**ABSL8 / S-707 / IRN / S-22

Ulsan2.4 - 6.4 mmAC / DCEP2TM, 2YTMABSL8 / S-727

Ulsan2.4 - 6.4 mmAC / DCEPF7P6-EM12K,F7A6-EM12K

AWS A5.17-97M-12K / S-717

Ulsan2.4 - 6.4 mmAC / DCEP3TM, 3YTMABSM-12K / S-717

Ulsan1.6 - 5.0 mm

**Mfr's guaranteed min. properties and chem. (W.M) CVN 34 J at -60 °C, TS>490 (N/mm2), EL.>30%, C 0.040 max, Mn0.5~2.5, P 0.040 max, S 0.030 max, Si 1.0 max, Cr 17.0~20.0, Ni 11.0~16.0, Mo2.0~3.0

AC / DCEPER316L(Wire)**

AWS A5.9-93YS-316L / Superflux 300S

Kiswel Ltd.

Pusan2.0 - 6.0 mmAC / DCEP3TM, 3YTMABSKD-40 / EF-200

Pusan2.0 - 6.0 mmAC / DCEP3TM, 3YTMABSKD-42 / EF-200K

Pusan2.0 - 6.0 mmAC / DCEP3TM, 3YTMABSKD-50 / EF-100




MEXICO

Lincoln Electric Mexicana S.A. de C.V.

Cleveland5/64 - 3/16 in.DCF7A2-EM12KAWS A5.17-89Lincoln Mexicana L-61/Lincoln Cleveland 860

Cleveland5/64 - 3/16 in.DCF7A6-EM12KAWS A5.17-89Lincoln Mexicana L-61/Lincoln Cleveland 882

NETHERLANDS

Hilarius Haarlem Holland B.V.

Rotterdam4.0 mmAC3YMABSHilco H100 / HW 530

Rotterdam4.8 mmAC2YTABSHilco H100 / HW 530

Lincoln Electric B.V.

Rotterdam2.8 mmDCEP4Y400MABSLNS T55 / 8500

PERU

Exsa S.A.

Callao4 - 5 mmDCEP1T, 3MABSPS-1 / POP-100

Callao4 - 5 mmDCEP1T, 2MABSPS-1 / POP-185

Callao4 - 5 mmDCEP1YT, 3YMABSPS-2 / POP-100

Callao4 - 5 mmDCEP1YT, 2YMABSPS-2 / POP-185

PHILIPPINES

Welding Industries of the Philippines

Manila2.5 - 5.0 mmDCEP3TMABSWipweld EMSI / WipweldOP 181

POLAND

Ema Brzezie Sp. z o.o.

Gdynia5.0 mmAC / DCEP3MABSIMT7 / TA.St.3

Gdynia5.0 mmAC / DCEP3YMABSIMT8 / TA.St.1

Esab Sp. z o.o.

Gdynia2.0 - 6.0 mmAC / DCEP3TM, 3YTMABSIMT 7F / FF 75

Gdynia2.0 - 6.0 mmAC / DCEP3TM, 3YTMABSOK Autrod 12.10 / OK Flux10.76

Gdynia2.0 - 6.0 mmAC / DCEP3M, 3YMABSOK Autrod 12.20 / OK Flux10.71




POLAND

Esab Sp. z o.o.

Gdynia2.0 - 6.0 mmAC / DC3TM, 3YTMABSOK Autrod 12.24 / OK Flux10.71

SLOVENIA

Elektrode Jesenice d.o.o.

Croatia2.0 - 5.0 mmAC / DCEP2TMABSEPP2 / AB100

Croatia2.0 - 5.0 mmAC / DCEP2YTMABSEPP2 / AR D1

Croatia2.0 - 5.0 mm


AC / DCEP2YTMABSEPP2 / AR 18.1

Croatia2.0 - 5.0 mmAC / DCEP2TMABSEPP2 / AR18.5

Croatia2.0 - 5.0 mm

Mfr's guaranteed minimum CVN 30 J at -40 °C.

AC / DCEP3MABSEPP2 / FBTT

Croatia2.0 - 5.0 mmAC / DCEP3YMABSEPP2Mo / FBTT

Croatia2.0 - 5.0 mmAC / DCEP4YMABSEPP2Ni / FBTT

Croatia2.0 - 5.0 mm


AC / DCEP2YTMABSEPP3 / AB100

Croatia2.0 - 5.0 mmAC / DCEP2YT, 3YMABSEPP3 / FB 12.2

Croatia2.0 - 5.0 mmAC / DCEP3YMABSEPP3 / FBTT

SOUTH AFRICA

Afrox Ltd.

Durban4 mm

Intended for local market

DCEP2YMABSAfrox Sub70-2 / Duracor B

SPAIN

Union Iberica de Soldadura, S.A.

Gijon2.38 - 6.0 mmDCEP2TMABSHB10/H700

Gijon1.6 - 6.0 mmAC / DC3YTMABSHB20 / AS60

Gijon2.38 - 6.0 mmDCEP3YTMABSHB20 / H700

SWEDEN

Esab AB

Gothenburg2.0 - 6.0 mmAC2YTABSOK Autrod 12.10 / OK Flux10.30

Gothenburg4.0 - 6.0 mmAC / DCEP3TM, 3YMABSOK Autrod 12.10 / OK Flux10.70

Gothenburg2.0 - 4.0 mmAC / DCEP3MABSOK Autrod 12.10 / OK Flux10.71




SWEDEN

Esab AB

Gothenburg2.5 - 6.0 mmAC / DCEP2TM, 2YTMABSOK Autrod 12.10 / OK Flux10.80

Gothenburg4.0 - 6.0 mmAC / DCEP2T, 3M, 3YMABSOK Autrod 12.20 / OK Flux10.70

Gothenburg2.0 - 6.0 mmAC / DCEP3M, 3YTMABSOK Autrod 12.20 / OK Flux10.71

Gothenburg2.5 - 6.0 mmAC / DCEP1T, 2MABSOK Autrod 12.20 / OK Flux10.80

Gothenburg2.5 - 6.0 mmAC / DCEP3M, 3YMABSOK Autrod 12.22 / OK Flux10.62



Gothenburg2.0 - 6.0 mmAC / DC3TM, 3YTMABSOK Autrod 12.24 / OK Flux10.71


Gothenburg4.0 mmAC / DCEP3M, 3YMABSOK Autrod 12.34 / OK Flux10.62

Gothenburg4.0 - 6.0 mmAC / DCEP3TM, 3YTMABSOK Autrod 12.34 / OK Flux10.71

Gothenburg3.0 - 4.0 mmAC / DCEP3YMABSOK Autrod 13.27 / OK Flux10.62

TAIWAN R.O.C.

Tien Tai Electrode Co., Ltd.

Kaohsiung2.4 - 4.8 mmDC3T, 3YTABSTSW-12KM / TF-385

Kaohsiung2.4 - 4.8 mmDC3M, 3YMABSTSW-12KM / TF-565

Kaohsiung2.4 - 4.8 mmAC / DCEPF7A2-EH14AWS A5.17-97TSW-14H / TF-560

Kaohsiung2.4 - 4.8 mmDC3M, 3YMABSTSW-14H / TF-565

Kaohsiung2.4 - 4.8 mmAC / DCEPF8A4-EG-GAWS A5.23-97TSW-60G / TF-560

TURKEY

Arctech Kaynak Elektrodlari Ve Tel San.A.S.

Istanbul2.0 - 5.0 mmDCEP3MABSArctech S1 / Subtech 10

Istanbul2.0 - 4.0 mmDCEP3YMABSArctech S2 / Subtech 10

Istanbul2.0 - 4.0 mmDCEP3MABSS1 / Subtech AB 18

Istanbul2.0 - 4.0 mmDCEP3YMABSS2 / Subtech AB 18




TURKEY

AS Kaynak, Kaynak Teknigi San. ve Tic. A.S.

Istanbul2.4 - 4.0 mmDCEP3MABSAS-S1 Wire / Lincoln 860Flux

Istanbul2.0 - 4.0 mmDCEP3M, 3YMABSAS-S2 / L-780

Istanbul2.4 - 4.0 mmDCEP3M, 3YMABSAS-S2 Wire / Lincoln 860Flux

Gedik Kaynak Sanayi Ve Ticaret A.S.

Istanbul2.0 - 5.0 mmDCEP2TABSGeka S1 / Eliflux BAR

Istanbul2.0 - 5.0 mmDCEN3YMABSGeka S2 / Eliflux BFB

Oerlikon Kaynak Elektrodlari Ve Sanayi A.S.

Istanbul2.4 - 4.0 mmDCEPF7A2-EL12AWS A5.17-89OE-S1 / F-261

Istanbul2.4 - 4.0 mmDCEP3YMABSOE-S1 / F-261

Istanbul2.4 - 4.0 mmDCEPF6A2-EL12AWS A5.17-89OE-S1 / OP1100

Istanbul2.4 - 4.0 mmDCEP3MABSOE-S1 / OP1100

Istanbul2.4 - 4.0mmDC(R)3MOE-S1/OS1150

Istanbul2.4 - 4.0 mmDC (R)F6A2-EL12,AWS A5.17-89

OE-S1/OS1150

Istanbul2.4 - 4.0 mmDCEP3YMABSOE-S2 / F-261

Istanbul2.4 - 4.0 mmDCEPF7A4-EM12AWS A5.17-89OE-S2 / F-261

Istanbul2.4 - 4.0 mmDCEP3YMABSOE-S2 / OP1100

Istanbul2.4 - 4.0 mmDCEPF7A4-EM12AWS A5.17-89OE-S2 / OP1100

Istanbul2.4 - 4.0mmDC(R)3YMOE-S2/OP1100 MO

Istanbul2.4 - 4.0mmDC (R)F7A4-EM12K-A2,AWS A5.23-90

OE-S2/OP1100 MO

Istanbul2.4 - 4.0mmDC(R)3YMOE-S2/OS1150

Istanbul2.4 - 4.0mmDC (R)F7A4-EM12K,AWS A5.17-89

OE-S2/OS1150

UNITED KINGDOM

Esab Group (UK) Ltd. - Esab

London2.4 - 4.0 mmAC / DCEP3M, 3YMABSOK Tubrod 14.00S / OKFlux 10.71

London2.4 - 4.0 mmAC / DCEP3M, 3YMABSOK Tubrod 15.00S / OKFlux 10.71

London3.0 - 4.0 mmDCEP4Y400ABSOK Tubrod 15.25S / OKFlux 10.62

Oerlikon Welding Ltd.

Liverpool4.0 mmDCEP4YMABSSD3 / OP 121TT; alsoRE3N / OP 121TT




UNITED KINGDOM

Oerlikon Welding Ltd.

Liverpool4.0 mmDCEP4YMABSSD3 / OP192

Liverpool4.0 mmDCEP4YQ550MABSSD3 1Ni 1/2 Mo / OP121TT

Liverpool2.4 - 4.0 mmDCEP4YQ460MABSSD3 1Ni 1/4 Mo / OP121TT

Liverpool4.0 mmDCEP4YQ690MABSSD3-2-1/2 Ni, 1/2 Cr, 1/2 Mo/ OP121TT

Liverpool4.0 mmDCEP4YMABSS2 / OP121TT

Liverpool2.4 - 4.0 mmDCEP3YMABSS2 / OP192

Liverpool4.0 mmDCEP3YMABSTibor 22 / OP 192 (Singlewire)

Liverpool4.0 mmDCEP3YTABSTibor 22 / OP 192 (Singlewire)

Liverpool3.2 - 4.0 mmDCEP3YTABSTibor 22 / OP 192 (Tandem)

Liverpool3.2 - 4.0 mmDCEP3YMABSTibor 22 / OP 192 (Tandem)

UNITED STATES

Esab Group, Inc. / L-Tec Welding and Cutting Systems

Cleveland1/16 - 3/16 in.F8A4-ENi4-Ni4(H8)

AWS A5.23-97Spoolarc ENi4 / Unionmelt429

Cleveland1/16 - 3/16 in.F8A8-ENi4-Ni4AWS A5.23-97Spoolarc ENi4 / Unionmelt651VF

Cleveland1/16 - 3/16 in.F8A4-ENi4-Ni4(H8)

AWS A5.23-97Spoolarc ENi4 / Unionmelt709-5

Cleveland1/16 - 3/16 in.F11A4-EF5-F5AWS A5.23-97Spoolarc 100 / Unionmelt709-5

Cleveland1/16 - 3/16 in.DCEP3M, 3YMABSSpoolarc 29S / Unionmelt651VF

Cleveland1/16 - 3/16 in.F7A2-EH14AWS A5.17-97Spoolarc 36 / Unionmelt 124



Cleveland1/16 - 3/16 inF7A2-EH14AWS A5.17-97Spoolarc 36 / Unionmelt 80

Cleveland1/16 - 3/16 in.F7A2-EM12KAWS A5.17-97Spoolarc 81 /Unionmelt651VF

Cleveland1/16 - 3/16 in.F7A2-EM12KAWS A5.17-97Spoolarc 81/ Unionmelt 231


Cleveland1/16 - 3/16 in.F7A2-EM12KAWS A5.17-97Spoolarc 81/ Unionmelt350M



ITW Hobart Brothers/Hobart Brothers

Cleveland1/16 - 3/16 inAWS A5.17-89,F7A4-EM12K

Hobart 121/EM12K




UNITED STATES

ITW Hobart Brothers/Hobart Brothers

Cleveland1/16 -3/16 inAWS A5.17-89,F7A6-EM13K

Hobart 121/EM13K

Cleveland1/16 - 3/16 inAWS A5.17-89,F7A6-EM13K

Hobart 121/SD3

ITW Hobart Brothers/McKay

Cleveland1/16 - 5/32 in

Man. guaranteed chem. (WM) & min properties:C 0.04 max, Mn 1-2.5, P.03 max, Si 1.0 max, Cr 19.5-22, Ni 9-11, Mo .75 max,Cu .75 max Y.P. 55ksi, T.S. 80ksi, El 30%

DC(R)*McKay In-Flux 308LGS/Lincoln ST100

Cleveland1/16 - 5/32 in

Man. guaranteed chem. (WM) & min properties:C 0.04 max, Mn 1-2.5, P.03 max, S .03 max, Si 1.0 max, Cr 23-25, Ni 12-14, Mo.75 max, Cu .75 max Y.P. 55ksi, T.S. 80ksi, El 30%

DC(R)*McKay In-Flux 309LGS/Lincoln ST100

Lincoln Electric Co. (Mentor Plant)

Cleveland1/16 - 3/16 in.F7A6-EM12KAWS A5.17-97L-61 / 882

Cleveland1/16 - 3/16 in.F7A2-EM12KAWS A5.17-97L-61 / 960

Cleveland5/64 - 3/16 in.F9A2-EA3K-A3AWS A5.23-97LA-90 / 8500

Cleveland3/32 - 5/32 in.F11A6-ECM2-M2AWS A5.23-97LAC-M2 / 880

Cleveland3/32 - 5/32 in.F7P10-ECNi2-Ni2AWS A5.23-97LAC-Ni2 / 880

Cleveland3/32 - 5/32 in.DCEP4M, 4YMABSLS3 / 8500


F7A0-EM13KAWS A5.17-97L50 / 781


DCEP3M, 3YMABSL50 / 880M


F7A2-EM13KAWS A5.17-97L50 / 960


DCEP3M, 3YMABSL56 / 880M

Cleveland5/64 - 7/32 in.F6A2-EL12AWS A5.17-97L60 / 760




Cleveland1/16 - 3/16 in.F7A2-EM12KAWS A5.17-97L61 / 761



Cleveland5/32 in.DCEP4M, 4YMABSL61 / 8500


Cleveland5/64 - 3/16 in.AC / DC3M, 3YMABSL70 / 761

Cleveland5/64 - 3/16 in.AC / DC3YTMABSL70 / 761




UNITED STATES

Sandvik Steel Co.

Philadelphia0.5 mm

Depostited weld metal meets AWS A5.4-92, E308L chemistry.

Sandvik 308L / 34SF

Philadelphia1/8 - 3/16 in.


Sandvik 308L / 35WF

Philadelphia0.5 mm


Sandvik 309L / 34SF



Sandvik 309L / 35WF

Philadelphia0.5 mm


Sandvik 316L / 34SF



Sandvik 316L / 35WF

Washington Alloy Company

Seattle2.4mmDC(R)ER 308LRW 308L

Seattle3/32inDC(R)AWS 5.17ST 100


Submerged Arc Welding Trade Name Spec Grade Current ...web.mit.edu/12.000/www/m2005/a2/8/SAW.pdf ·...

Documents

Transcript of Submerged Arc Welding Trade Name Spec Grade Current ...web.mit.edu/12.000/www/m2005/a2/8/SAW.pdf ·...