of India

UNION BANKOF INDIAREGIONALOFFICE,JABALPURTELEPHONE- 0761-2450674

Sub: Furnishing 8r. Electrical Work for Nohta Branch,

Distt. Damoh (M.P)

Tender Issue Date Nov 17 2018

Last date of submission Dec 08, 2018 up to 14:00 hrs

(Tender will be opened in the presence of bidding firms or their representativePresent at the time of opening of tender)

FOREMPANELLEDVENDORS(UBI ONLY)

Place of submission

UNION BANKOF INDIAREGIONALOFFICE

Gurunanak Market, RusselChowkNapier Town, Jabalpur (M.P)

Architect

MIs Architect SyndicateJABALPUR

Ph - +91 9300107760

Nohta BranchDistrict - Damoh, Madhya Pradesh

Tender issued to: MIs ...

Appendix to conditions of contract

Defect liability period One year from date of payment of final bill

5th day from the date of issueof work orderDateof commencement

Periodof completion With in 40 days

LiquidatedDamages Rs.500/- per day

Periodof final measurement submissionof final bills

RetentionMoney 4% of the final bill for one year

Rateof interest for delayedPayment Nil

Validity of rates till the completion of work

Signatureof Contractor

Date

NOTICE INVITING TENDERS

MIs Dated:

Project : Furnishing, Electrical work - Nohta Branch,

Distt. Damoh

Dear Sir

1. Sealedtendersare herebyinvitedon behalfof DyGeneralManagerfor interior work at Nohta,Dist Damoh.2. The work are required to be completedwithin 40 days from the 5th day after the employer issueswritten

order to commencethe work or from the date of handingover of the site, whicheveris later.3. Tender documentconsistingof the drawings,specification,scheduleof items of the variousclassesof work

to be done, and the set of conditionsof contract to be compliedwith by the personwhose tender may beaccepted,which shall also be found in the form of tenders,can be taken from UnionBankof India, RegionalOffice,Jabalpur, (MP)or from our websitewww.unionbankofindia.com.onanyworkingdayfrom17.11.2018up to 12.08.2018betweenthe hrs of 10.30am to 17.30pm.

4. Tenders,whichmust alwaysbe placedin sealedcover,with the nameof the projectwritten on the envelopesshall be receivedby the Dy GeneralManager,UBI, up to 2 pm on 08.12.2018and shall be opened in theoffice at 16.00pm on the sameday.

5. The acceptanceof a tender shall rest with the employerwhich does not bind itself to accept the lowesttender and reserves to itself the authority to reject any or all of the tenders received without the aassignmentof a reason. All tenders in whom any of the prescribedconditions are not fulfilled or areincompletein any respectare liableto be rejected.

6. The bankdoesnot bind itself to acceptthe lowestor any tender and reservesto itself the right of acceptingthe wholeor any part of the tender and the tenderershall be boundto performthe sameat the rate quoted.

7. All ratesshouldbe includingof all taxes (excludingGST)GSTwill be paidextra as per applicablenorms.8. The tender for works shall remainopen for acceptancefor a periodof 90 days from the date of openingof

tenders. If any tenderer withdraws his tender before the said period, then the bank shall be at liberty toreject andabandonthe tender and forfeit earnestmoneypaidalongwith the tender.

9. It shall be obligatory on the part of the tenderer to sign tender documentsfor all the componentparts andthat, after the work is awardedhe shall haveto enter into a formal agreementwith bank in accordancewitharticle of agreement includingall componentsof tender document but his liability under the contract shallcommenceform the date of written order to commencework whether the formal agreementis drawnor not.

10. The tenders shall be evaluatedagainst standardrates of the architect for freak rate as per IBA guidelines.The higher freak rates shall be negotiatedto reduceto acceptablelimits and contractor shall be asked toexplainworkabilityof low rates. Tenderswith unworkablelow ratesare liableto be rejected.

11. The contractor shall take all the necessaryprecautionswhile working and to safeguardadjacent property,Bank'sproperty, Bank'semployees,and traffic persons.

12. All the ratesquoted are inclusiveof removalof rubbish/debriscollectedduring the progressof work, rejectedmaterialand clearanceof site beforeand after the work is completed. Notmore than one truck loadshall bestored that to for not more than 3 days. The contractor shall arrange to removethe same immediately. Ifthe contractor is failing to removethe sameand the expensesshall be recoveredfrom the contractorand hewill not disputefor the expense.

13. Contractor has to take care that value of work does not exceed the tender amount. If the bill of thecontractorexceedsthe tender amount, bankwill not be liableto makeextra payment.Contractorhasto takeprior approvalin writing from bankbeforedoing anywork whichexceedsthe tender amount.

CHIEF MANAGER

nltHON OJ. ovos NlltVJ

__ .-.._--'\"\\"\

..0-.8 X ..9-.6'~'rs

..6-.L X ..9-.1'..O-.ll X ..6-.1'1A880l 9NDINlt8

..0-.9 X ..9-.1' ..0-.6 X ..0-'>A\S NISV;)

0 ~~o

* ::r:§~ tTl<-.. l» o

\0 IlO ::l ~::l 0 tTl'0 c..;.. 0-.J:::: t::C00 -<Sf :;:0 0~ ~ ~::l E.

~90N t::C

-<CIlo;J>t"'"rn

.z_ Z0:;:0

5:l

)-~o::r:""'",...,

()-

~ trl~.::; n"," s:::~i:1 ~,...,

,.. ....;_~ 8 C/:))00 -<"'0 ~F:Jt' ::<' Z.,,~

~~~ 0- )0

~......

3 r- o'0 )0~"' )-())0 ,...,'"!" trl

1N

~

..£-.8 X ..,"01-.01ASSO'

..6-.L X .""01-A!I!lO'l

..0-" X .s·01'S'd'n

.s·OI-.OIX ..c-zzAlIVNOnVl.S

- - - - - -------------------------

SCHEDULE OFELECTRIFICATIONG Downlighter 26 watt

I?ZZ2I Distribution Boardc:8::I mpb.

12:t A.C.Tube light

o Spot light

STATIONARY22'-6" X 10'·10.5"

Bracket Fan

CFL 32 watt

Power Plug 5 amp

Power Plug 15 amp

Switch one way

Switch two way

Fan

TIT

GJ

Switch Board

Telephone

Exaust FanBell

STRONGROOM9'-7.5" X 9'-3"

LOBBY10'-10,5" X 8'-3"

D

D DBell Switch

Louvers

z:3a.....::::>oI>:3

....I«o~....oW....IW

TO DAMOH

------------1

tMAIN ROAD TO NOHATA

Chapter 06

B IEF S E I I I N

I L LI

i······ .i S.No

Il· 2

IL_ ...

I 3

I1I

i

6. BRIEF SPECIFICATIONOF MATERIAL..... -.-~--.--.- ---------.-- - - -~--

~,-,

4 TFiooiinginstore~UPS &i Battery Room, ParkingArea.

6.1 FLOORING & CLADDING. -.--- -----... -------.--.--- ..---..-..---i

SPECIFICATION

. Marbonite ~trascania-StainS'free shacIe or-equivalentof similar shade. Tiles'.' shall confirm to IS 1237· Edition 2.3, Variation in dimension not to exceed I±1.0MM. The equivalent brand of Nitco, Naveen, Bell, somany, Kajaria, HR iJhonson,Asian granite, Varmora etc. may be considered. .

brought to site, unless otherwise specified. Before starting the work the

contractor shall get the samples of slabs approved by the Engineer-in·Charge.

iVORVShide ffantfSkiCifrom-HRJ, Nitco;- Naveen, -Kajiirla;'Somany, Varmori;·'sunheart etc. or equivalent of similar shade. Tiles shall confirm to IS 1237-Edition 2.3, Variation in dimension not to exceed ±1.0MM.

21 I g e

. - ·····ifEM ·---------1- -STANDARif --------.-~--- -..- ..--.- - .

APPLICATIONL-.__ ....•.•..., _ _.__._ _.._..........•_•......_ _ ~_____L .I 1 i Flooring in Transaction, Vitrified TilesI I office, Customer Lounge, of size 2'X2'

, conference Room, SelfService Lobby & SOVAreas ..................................._._ __ _ _-_. __ 1. . _. .

, Flooring In Toilet. I Ceramic Tiles IVORYshade e anti Skid from HRJ, Nitco, Naveen, Kajaria, Somany, Varmora,. of size l'X1' sunheart etc. or equivalent of similar shade. Tiles shall confirm to IS 1237-.............................._ _.. . ._ _._..__ ._._ _ ~~~t_i()I"I.?'3, Variati0rl_i.1"I~j!!l_~~ion_fl_()!~()~~c::~~~}.9Jt#11 _ _ . _Flooring at Main Entrance GRANITE-Lakha i The thickness of the slab shall be 20mm. Tolerance of ±2 mm shall be allowed:& Wall Cladding at main Red or Ruby for the thickness. The slabs shall be of selected quality, hard, sound, dense andEntrance. Red homogeneous in texture free from cracks, decay, weathering and flaws. The

slabs shall have the top (exposed) face polished before being brought to site,unless otherwise specified. Before starting the work the contractor shall get the I

: samples of slabs approved by the Engineer-in-Charge. I

·-K~~~~~~~~E- i Thethfcknessof the Slibshiill be 2Smm. Toferance-oTiImmShaU-be allowed IMirror Polished [ for the thickness. The slabs shall be of selected quality, hard, sound, dense and!

! homogeneous in texture free from cracks, decay, weathering and flaws. They

shall be of the colour indicated in the drawings or as instructed by the Engineer­

in-Charge. The slabs shall have the top (exposed) face polished before being

Ii _.._._ _._ •._.._--+ . ._ __ .Wall Tiles in Toilet . Ceramic Tiles

of size 2'Xl'

S.No Item

Door, Window,Ventilators.

2 Toilet Door

6.2 JOINERYDETAILSStandard Application Specification

The Aluminum Section shall be powder coated with ivory colour. Door should be ofsame colour as of frame. The aluminum extruded sections shall conform to IS733 andIS1285for chemical composition and mechanical properties. The stainless steel screwsshall be of grade AISI 304. The permissible dimensional tolerances of the extrudedsections shall be as per IS 6477 and shall be such as not to impair the proper andsmooth functioning/operation and appearance of door and windows. Aluminum glazeddoors; windows etc. shall be of sizes, sections and details as shown in the drawings.The details shown in the drawingsmay be varied slightly to suit the standardsadoptedby the manufacturers of the aluminum work, with the approval of Engineer-in-Charge.Before proceeding with any fabrication work, the contractor shall prepare and submit,complete fabrication and installation drawings for each type of glazing doors, windows,ventilators and partition etc. for the approval of the Engineer in-Charge. PanelingMaterial: - Particle Board-Synthetic resin bonded flat pressedthree layers, multilayerand graded particle board defined in IS3087 having superfine surface shall be used forproduction of pre laminated particle board. For ECOMarksthe particleboard shall alsoconform to the requirements of ECOMark specified in IS3087. Float Glass- It shall beclear, float transparent and free from cracks. The float glassshall conform to the IS14900and 06MMthick.

I·Partially / FulTyglazecr-niTiber for aaor~-wTndow-an(rveniilators frames shall be af high quaHty SalWa-ad.-·AI T~ak Wood Door tolerance of ± 2 mm shall be permitted in the specified finished dimensions of timberI hmged & mounted on sections in frames. Paneled or glazed shutters for doors, windows, ventilators andi Salwood Frame. cupboardsshall be constructed in the form of timber frame work of stiles and rails with

panel inserts of timber, plywood, block board, veneered particle board, fiber boardwire gauzeor float glass.The shutters may be single or multi paneled, as shown in thedrawings or as directed by the Engineer-in-Charge.Timber for framework, material forpanel inserts and thicknessof shutters shall be as specified. Generally paneled glazedor paneled and glazed shutter shall conform to IS1003(Pt. 1& 2).

f LJPVCDoor··hinged& -111-edaarunit-shi)"ufdbe steeCreinfurced ., water-drainage does--not-pass-fhrou-gh-fhe·i Mounted on Heavy reinforcement chamber. The product should be free from all sharp edgesand blurs.i duty UPVCFrames.

Partially/Fully glazedAluminum Shutter,hinged & mounted onAluminum frame.

22 I P age

----,-- LIGHT ~Yx;l size LED light -PhiGps,Wipro, Bajaj,Crclmpton, Havells or equivalent etc:-to be fitted-Til-False cellmg-FIXTURES fixtures. with 2'X2' grid. LEDSpot light from Philips / Wipro, Bajaj, Crompton, Havells or

equivalent as per Architect instruction to be selected of appropriate make, flushmounted to be fitted in GypsumCeiling. In rural and semi- urban brancheswhere onlygypsumboard ceiling is provided and LEDfittings are not available there 2'X2'mirror

: i optic fixture with CFLLamps/ CFLSpotlights shall be provided.~2-- FALSECEILf~fGT co-iTil,Tnationof Heavy: 4"sunkfiiTs-e-celTing-equivcii"e-ntofArmstrong, Tridon, Conwed,Comceiletc. 600x600 /

I duty Commercial on 15mmdune supreme RH99 prima tiles with regular edge frame work as specified byI 2'X2'metallic frame with Armstrong,Tridon,Conwed, Comceil etc. company / equivalent, thus covering 40%ofi ceiling tiles and Gypsum area whereas the balance area to be covered with gypsumboard (152095-1982)falseI board false ceiling in ceiling about 60%area coverageand vertical sunk areas. Provisionof False ceiling atI ratio 40:60 as per RuraL& semi Urban Brancheswould be need based and as per decor required, withcoverage. specific-'.a,-"PLP_ro::_cv-=a:.::_L_::,of,:._.:_::RO::._:__'~" -r-r-

pAINTIN-{iO-F- walfs over PoP/ Putty 1 The plastered surface of structure walls-7-celting to be finished with two or moreWALL& base painted with i coats of putty over which finishing coat of Pop shall be applied to ensure smoothCEILING PLastic emulsion paint I surface. The finished surface is to be painted with two or more coats of Asian Royall

for internaL side and NeroLac feature touch/ Johnson & Nicholson/Shalimar/Berger Pearl finish orwith weather proof equivaLent for internal wall & two or more coats of Apex Ultima/ / DurashieLdoremuLsion paint on equivaLentfor ExternaLwall finish in Ivory or Broken white color.externaLwalls.-~~:":";":';_;;;;_:_;___"---"-------------------------_---"'--f-'----'-_---

. Detalils dasEPetr.draw~dngClassII Teakwood Batonsfixed at 2' Center to center coveredwith 6 mm commerciaLenc ose. x enor SI eLf" " t IS 303 Th teri rf t b f" h d ith L ' tPARTITION/ La' t f ' h d 6 Py con irrmng 0 • e ex enor su ace 0 e ims e WI amma e as

PANELING i MMmmaelm,s t 1o;~r d specified in drawing enclosed. For tow height partition & full height fully/ partiallyI ove~O~:~~Cl=n~ ~l~~:d glazed partition, t~e Glazing shall be done with 08 MMthick float gLassconfirming to, asper requirement. IS14900,enclosedm frame.ffiM thick of Shadesas The thickness of all Laminates-shall beuniform, wiihlna-tolerance of ± 5 per cent.specified in drawing & Corresponding Laminates on either side of the centre one shall be of the sameDetails enclosed. thicknessand species.Confirming to IS14616.

_. - --_._. ---~-----_--_--

S.No i

3 .

6.3 FALSE CELELING , WALL FINISH!NG,LlGHT FIXTURE,PANELlNG, PARTITIONItem Standard Application !

!Specification

I-----j

6 I LAMINATE,

23 I P age

6.4 LAMINATION DETAIL ,-;-:--:-=:----.._-_._----_ ..__.....SHADE & MAKECOL6i]R----~ - ---A~-~~~-~-~-~g~-I

! Base and on Table 1 1 sjgn,ifure--~-H5rMfNoberWhite, F()rmica - G324/1324 SuperWhite, Hentage-l01 so··i Counter Top ! Super white, Silicon - 101 MTWhite, Euro - 101 SF, Green lam - 101 White, Century--------.-------J .._____! 107 Snow White, NewMica - 3501 White, or equivalent of similar shade

REDLAMINATE11" Band on Bottom o(TS-jgnature - 231 SF DeepSpice, FormIca ~G 566/1566, Herjtage~1ij46AKRed-;-SlHc()n-.:-i 4" TOP & Bottom 176 SFVodafone red, or equivalent of similar shadeI Skirting

- BLUE· rJ"Band on Top of 4" lSlgnature - 24ir S(Royal Brue~F()rmiCa ~G457J7f45i5pectrum-Blue, Silico!1:-:ibo SFLAMINATE i TOP & Bottom I Blue, Euro - 192 SF, NewMica- 3590 Blue, or equivalent of similar shade

i Skirting

! ------WHITELAMINATE

BEIGE i For Table Top &LAMINATE I Counter Top

---TSignature:WfllteChedar Shade, Mould walnut(SF)- 567; Associate Laminates - White\ chedar W 2085 ST01, Amulya 2002 SF 1 Europa Beech or equivalent of similar shade.I

,..._._.__~~_._...._...__...L__.~_.. ~_._~...._..-..._. _ _._----------_. __ .._-_ .._

LAMINATE SAMPLE

//

WHITE LAMINATE REDLAMINATE BEIGELAMINATEBLUE LAMINATE

24 I P.a g e

Tender Estimate for Furnishing work of Nohta

Union Bank Of India, Dist-Damoh, M.P

No.S. Unit

2.06

5

Rate AmountItem and specification

1 FLOORING -Providing & Fixing premium quality polished vitrified tilesof size 600mm x 600mm ( min. thickness - 9 mm ) ofapproved shade and conforming to IS: 15622 of pure matfinish infinity series of H&R JOHNSON or equivalentquality in KAJARIA or NITCO .Fixing in cement mortar1:5, complete including material and labor.

Qty.

Smt. 116.82

2 PANTRYProviding and fixing 18mm thick gang saw cut mirrorpolished (premoulded and prepolished) machine cut forpantry, locations of required size of approved shade,colour and texture laid over 20mm thick base cementmortar 1:4 (1 cement: 4 sand) with joints treated withwhite cement, mixed with matching pigment, epoxy touchups, including rubbing, curing moulding and polishing toedge to give high gloss finish wherever required etc.complete at all levels. Granite of any colour and shade

Smt.

3 PANEL DOORS - Providing & applying 1"x1.5" teakwood frame for exsiting panel doors covered with 6mmcommercial ply Garnet, Kit, Guna, or equivalent finishedin lamination redlsilver . nos ..

4 Aircon PIF 6" powder coated aluminum louvers ofapproved colour. & make.

Smt. 25 FALSE CEILING ('E' BOARD)

PIF suspended 4mm th 'E' board of Eternite Everest ltd.false ceiling of approved pattern, with GI suspended fromRCC slab/beam as approved bankl Architect. Including GIparameter channels of size O.55th heaving on flange of20mm and another flange of 30mm and web of 27mmlong with parameter of ceiling, screw fixed, to the brickwalilpartition with the help of nylon sleeves and screws at600mm CIC, the suspended GI intermediate channels ofsize 45xO.9mm th with two flanges of 15mm each fromthe soffit at 1200mm CIC with GI cleats and steelexpansion fasteners. Ceiling section of O.55mm thheaving web of 51.5mm and two flanges of 26mm eachwith help of 10.5mm are then fixed to intermediatechannel with help of 10mm are then fixed to intermediatechannel with help of connecting and in direction SQMT. 69.67perpendicular to intermediate channel at 457mm CIC4mm 'E' board channel at 457mm CIC in both thedirection screwed fixed to the ceiling section with 25mmdry wall screws at 230mm CIC screw, fixing is donemechanically with drilling machine and suitableattachment. Finally the boards are to be jointed andfinished with jointing compound, paper tape and twocoats of top coat, suitable for 'E' board as recommendedfor light fittings in cut out etc are to be made with a frameof parameter channels of size 20x27x30xO.5mm THSupported suitably angle beads, edge bends, controljoints as required to be provided the quoted rates toinclude all the above item, ceiling to be painted withminimum two coats of plastic emulsion paint inducingbase preparation etc complete

--------------------------------------------

6 FULLHEIGHT PARTITION (glazed/semi glazed)

P/F at site full HT. Partition with G.I. Section frame of size50x50 mm placed 600mm c/c or per drawing. The frameis to be sandwiched with 12mm TH MR grade ply to befixed frame both sides the ply to be finished with 1.0mmTH. Approved colour laminate of approved make. Thepartition shall have 8.Omm TH plain glass as per dwg, tobe made to have skirting and pattern over the partitiondesign of approved different colour laminates as per the.Design. The partition shall have a pattern ofinlays/different colour band as per dwg and design, all theexposed edges to be properly covered with cedar woodmoldings, which are again to be melamine polished ofmatching shade, the cost shall include all materials,labours, accessories (excluding cost of door) butincluding cost of door fame as per the side condition etc.complete.

SQM. 24.96

6.09

CASH COUNTER (SW) CONTINUOUS -Providing and fixing at cash counter (including cash cabinpartition) 1500mm wide with 3 nos. cash drawers on oneside & drawer and CPU Trolley on the left hand side, asper the design to be made up of 19mm MR ply make onlyand finished with 1.0mm laminated finish. Customer Topis to be made up of 25mm thick MR ply of approved makefinished with 1.0mm laminate of approved shade &colour. The drawer is to provide with sliding rail (Hettich).The counter shall have sliding key board to be fixed in it,the front of the counter shall have different colourlaminate in skirting and front design as per design to befollowed strictly with exposed edges to be finished withmelamine polish, or with the approved mica colour thecost shall include all materials, labour etc. complete.

R.M.

7 FRONT CASH SHOW WINDOW (SW)P/F front cash show window in 12mm TH Glass with acash hole and approved pattern "etching" over it in cashcabin partition to be fixed with help of SS finished Dbrackets, including rounding off all the exposed edgesincluding melamine polish over all the exposed edges, allmaterials, labour strictly as per the design and dwg etc.complete cabins.

RM. 5.93

8 ETCHING PATTERNExtra for making of itching pattern in glass area of all thedoors, partition and other glass area as per the approveddwg design and pattern.

SQM. 4.14

9 HALF HEIGHT STORAGE CABINETP/F at site half height storage cabinet 900x450x750mmhigh fully covered from all sides and 450mm deepincluding necessary shelves as per the design andspecifications with open able shutters made up of 19mmMR Grade ply. The rear is to be closed with 8.Omm thickply; h 8.Omm ply, The top shall have 19-25mm approvedshade Granite single piece stone with front Leveled edge.front of cabinet is to be finished with 1.0 mm thick SQM. 3.57laminate or approved colour and pattern. All exposedportion shall be finished with 4x19mm white cedarwooden beading, all wooden member shall be finishedwith melamine polish. All complete with handle, locks,hinges etc. The inside portion in to be finished withO.8mm the, laminate (white incisor).

10 FULL HEIGHT STORAGE CABINETProviding and fixing at site Half height storage cabinet2100 height full covered from all sides and 450mm deepincluding necessary shelves as per the design andspecifications with open able shutters made up of 19mmBWP ply/ board. The rear portion is to be closed with8.0mm ply, top shall have 19mm MR grade ply finished1.0 mm thick laminate. Front of the cabinet is to befinished with 1.0mm thick laminate with approved patternwith different colour laminated finish of approved shade & SQM. 25.69colour with proper teak wood molding, beadings, anddifferent colour laminate as per pattern in shutters and inskirting strictly as per the design, pattern, including allnecessary fittings, such as mort ice locks (Godrej) ,handles. The inside portion is to be properly painted withone coat of wooden primer and two coats of lusterfinished synthetic enamel. The cost shall include allmaterials, lab our accessories etc. complete.

11 LOW HEIGHT PARTITION

P/F low HT. Partition 4'-0" with 1mm th.G.1. partitionchannel frame of 50x50mm place c/c upto 3'-0" HT and12" high 12.0mm thick plain glass with etching pattern tobe fixed property over it with s.s. finished D-brackets. Thepartition shall be fixed properly with floor. The frame shall SQM 9.51be covered with 12mm BWP grade ply both side andfinished with 1.0mm BWP grade ply both side andfinished with 1.0mm thick laminated of approved colourand make. Exposed portion shall be covered with cedarwood molding/beading duly finished with melaminepolish.

12 BRANCH MANAGER TABLE.(With side credenza) Providing at site Branch ManagerTable of size 1800x750x750 mm (h) as per design to bemade up of 19mm BWP ply with laminated finish. WithSliding Keyboard tray and CPU trolley in inclined positionbeneath the table. Tabletop is to be made up of 25mmthick BWP ply with laminated finish, with 12mm plainglass top of 1800x750mm size. The table shall have 1No. 400mm wide cupboard with 1 No. Sliding tea tray andthree Nos. drawers on one side. The left side of the table NO. 1shall have side credenza 1500x450x715mm (h) cabinetwith space for keeping briefcase. The table/side table tofinished with 1.0mm thick on all exposed sides. The frontportion of table is to be finished with different colourlaminate as per the design. / All drawers are to beprovided with heavy duty sliding rails. The exposed edgesof ply are to be finished with 40mm half round cedar woodbeading/lapping. The cost of the table shall include allnecessary powder coated fittings. Material, labour etc.complete.

13 TABLES (with side credenza) NOS. 2'---

P/Fat site officers table as per different size as per designand shape to be made up 19mm BWP ply with 1No.storage cabinet at one hand and sliding drawer on theother hand with sliding keyboard as per design &specifications. The top of the table shall be of 19mm thickBWP ply with approved colour laminated finish with12mm glass of size 1200mmx450mm All exposed surfaceshould have melamine polish of matching shade with thelaminated finish. A CPU trolley is to be provided withcastor wheels to be placed below the table. The tableshall include the cost of side credenza of size1200x450x715mm as per design with front made up to19mm BWP open able shutters and drawers on slidingrails to be finish of approved shade. All exposed surfacesto be finish with 1.0mm laminated finish and 40mm halfround. T.w. lapping. The cost shall include allaccessories such as sliding rails, drawer locks etc.complete including all materials, labour etc. completestrictly as per drawings.Table 1500x450x750mm ht.

NOS.

14 WOODEN PANELLING TO COLOUMNP/F at site wooden paneling with 1.5mm th.G.1. Squarepipe of 40x40mm to wall/column @ 600mm c/c bothways. It shall have 9mm thick BWP Grade ply, which shall SQM. 4.6be fixed to G.I. frame with nails and fevicol and finishedwith 1.0mm thick laminate by approved colour and shade.All complete as per drawing and speciflcatlon,

15 WRITING LEDGEP/F writing ledge with glass top 12mm thick edge polishsupported by 100 mm thick boxing ply finished with 1mm NOS. 1thick laminate of approved shade. All complete withnecessary hardware, fittings, fixtures etc.

16 CHEQUE DROP BOX;-Providing and fixing at site drop box of size 300x450 to bemade up of 1st class teak wood frame of size 25x50wooden sections in front 5.0mm plain glass. The boxesshall have 19.0mm ply with approved shade of laminate.And lockable shutter (mortise lock (Godrej) as per thedesign & drawing etc. complete.

17 ALUMINIUM MAIN GLAZED DOORP/F Fully Glazed pivoted doors of sizes mentioned indrawings Tufin glass 12mm thick of approved make to befixed on (2300X2100mm) aluminum section all edges ofthe glass shall be machine polished. Rate shall include SQM. 5.2approved locking system, 1 pair or S.S. handles, floorsprings, etc. The opening of the door shall be providedwith(101.6x45x3mm) frame duly finished with colouranodized. including E-Lobby glazed door with doubleaction hydraulic floor spring of approved brand

18 ALLUMINIUM COMPOSITE PANNEL:-Fabrication work for porch construction providing &making porch comprising of 50x50x6 ISA framedstructure. Finished with A.C.P Sheet standred com. Makered color measurement shall be of angle used for SQM. 6.35making the porch.

19 PAINTINGTwo or more coat Plastic Emulsion paint to falseceiling/walls. The rate shall include scrapping, leveling

SQM. 350and repairing the surface. Primer coat + Emulsion paint ofthe approved shade and make shall be applied as pervitrified tiles of approved make and shade specification.

TOTAL FOR INTERIOR WORK RS

SPECIFICATION OF RATES OF (ELECTRICAL WORK) FOR UNION BANK OF INDIA,BRANCH AT NOHATA DAMOH M.P.

S.NoDescription of Items Qty. Rate Amount

A. ELECTRICALITEMSApproved Makes of Copper Multistrands wiresFinolex, Havels, RR Cable, And Modular SwitchlSockets accessories MOS, Crabtree, Anchor ,L&Tonly

The rates for the point wiring shall include providing andfixing of following:

a. Wiring of the point of any length from switch board topoint outlet including p.v.c conduit with 1.5 sqmmStranded copper conductor PVC Insulated.

b. Earthing of all switch box and all outlet boxes fitting,fans,

c. Modular Switch/ Sockets of Standard make withnecessary modular series cover plate and M.S boxes.

d. Embedding all conduits in walls laying in slabs, falseceiling or in floors including all accessories as reqd,cutting and refilling the chases with cement mortar.

Providing, fixing switches, sockets, M.S. boxes (1.6mm. thick) draw boxes, G.I. Pull wires (where required), brass• screws, ceiling rosel connector etc.

f. Adopting separate and independent system of wiring forlighting, power (normal and essential supply). Wiring forfollowing points using PVC insulated copper conductorwires of 650V/1100 V grade in 16 SWG M.S. conduitconcealed / exposed including switches & sockets asabove.

g. Providing wiring (supply, fixing testing & commissioningetc) for light point/ fan point/ exhaust fan point/ call bellpoint etc. with 1.5 sq.mm stranded copper conductorPVC insulated in recessed/ surface p.v.c conduit withaccessories, modular switches, ceiling rose, bulb holdersetc. fitted in standard concealed sheet steel boxesincluding 1.5 Sqmm PVC insulated copper earth wire etc.complete as required. (Wire colours: red, black, green)

Providing and fixing one or three light point controlled by 87 Nosone switch bell point and 6A plug point.

1.2 Providing and fixing Celing fan point with regulater.. 3.00

2 Providing, fixing, testing & commissioning of UPSpoint 11.00 Noscomprising of 2 no. 6A switch and 3 no. 6 pin PIN 6Amp. Socket (modular type) on separate board fitted inconcealed sheet steel boxes. (For UPS output)

3 Providing & fixing of 6/16 Amp Power Point with modular 7.00 Nosswitch socket combination i/c all labour, materials, etc.complete.

4 Supply & fixing of 20 Amp Metal socket with 20 Amp 5.00 NosSPMCB incl. all labour, materials, etc. complete. Thisitem include 20 A SPN (DP) MCB near busbar in seprateencloser.

5 -t-:CiRCUIT wiRiNG5.1 Providing and fixing circuit wiring of 2 x 1.5 (p &n)+ 4 8.00 Nos

sqmm E of stranded copper wire p.v.c insulated inms/pvc pipe of upto 35 meter length.

5.2 Providing and fixing circuit wiring of 2 x 2.5 (p &n)+ 4 6.00 Nossqmm E of stranded copper wire p.v.c insulated inms/pvc pipe of upto 35 meter length.

5.3 Providing and fixing circuit wiring of 2 x 4.0 (p &n)+ 4 4.00 Nossqmm E of stranded copper wire p.v.c insulated inms/pvc pipe of upto 35 meter length .

..........--_.,... . ...._....... --6 ; MAIN BOARD PANEL & DISTRIBUTION SYSTEMS

Approved Makes of MCB'S, Distribution Board's areHavels, Standard, L&T Only

6.1 MAIN ELECTRICAL PANELSupplying and fixing of following 16 ways, three pole andneutral sheet steel loading MCB distribution board, 415volts & 100 A three phase switch, on surface/ recess,complete with tinned copper bus bar, neutral bar, earthbar, din bar, data cable plate, inter connections, includingpainting, earthing etc. as per required. with followingfittings.

1.00 set

DPMCB-20 Amp 6 Nos.TPMCB 63 Amp.1 No.SPMCB 3 Nos.Set of Indicator lights

1.00 Set

II MCB-32 Amp.1 No.III SPMCB-6-20 Amp. 10 Nos.7 UPS DISTRIBUTION BOARD

Supply.lnstaliation,Testing and comrmssmq of the 1.00 setfollowing way MCB direct on wall including the followingaccessories

a. 1No. TPN DB 16Wayb. 2.No. TPMCB 63 Amp.c. 2 No. TPMCB 40 Amp.d. 6Nos. MCB 10 to 32 Amp.8 POWER CABLE

Supply, laying, testing and comrrussrorunq of thefollowing 1100 Volt grade L.T. A.I. Conductor armouredcable inner and outer sheathed, alongwith the two tun ofG.I. Earth wire etc. I/c termination at both ends.

a 3.5Cx50 sqmm (with 08 swg G.I Wire)b 3.5C )(35sqmm ALAR (DG Cabl~) 40.00 Mc 4Cx16 sqmm (with 08 swg G.I Wire) 55.00 . M

'SUB HEAD :TELEPH6NE' WiRiNGI Approved Make. Finolex,Havels,D-Link, MDS

9 . TEL.EPHONEPoiNT'Supplyand"'laYing"ofFourpairUTPCAT6i ..AN cables '2:00 Nosin PVC Casing of PRESION/MODI/SHRINATH makeonly including modular typeincluding modular typeTelephone Outlets (RJ - 11) with suitable size M.S.lPVCmodular boxes complete as required.alongwith doubleoutlet with shutter.

SUB HEAD STRUCTURE CABLING WORK(COMPUTERS NETWORKING).(Avg.Length 35 M)

10 Supply and laying of Four Pair UTP CAT 6 LAN cables 9.00 Nosin PVC Casing of PRESION/MODI/SHRINATH makeonly including modular type Information outlets box RJ-45 CAT-6 with suitable size M.S/PVC modular boxcomplete with insulation displacement connectet oneport (D-link)

11 Supply,drawing,Testing and commissing of UTP CAT-6 1.00 SetLAN cable Networking including the followingaccessories

24 port D-Link1No.Patch Panel CAT-6

fabricated patchsconnectors and boots on

a one meter length

b two meter length

c Testing of Nodes.13 SUBHEAD FITTINGS:

MIRROR OPTICS FITTINGS:Approved Make Bajaj,glomore, philips only

6.00 Nos

6.00 Nos

1.00 job

a Providing & fixing Philips make Green Square LED 15.00 Nos600x600 mm(36watts)2950 lumens designed for ceiling mounting system makePhilips,hevells,bajaj cromption model complete in allrespect (All lSI mark& complete in all respect)

lights 18 watt Downlighter88S170 ~pelamp. Make of lighting fixtures toPhilips,bajaj,hevells,cromption.Complete in all respects)

c Supply, fixing, testing and commissioning of 9 watt down 5.0lighter of standard make(havells,phenolex,anchor) withcfllamp. attachments available ,complete as required

e Supply, fixing, testing and cornrmssrorunq of wall 5.0mountain fan 14" size with regulator etc.complete asrequired 8AJAJ Cat NO. 8W -04 or equivalent

Nos

testing and commissioningetc.complete complete

f. Supply, fixing, testing and commissioning48" size with stepted regulator etc.complete

Providing & fixing two No. Ton 3 starVoltas/Carrier/blue star or any standard make with Timer& stabilizer

Supply, fixing testing and comrmssmq of 28 watts T5 9.00light fitting of standard make complete with fittings

1517 EARTHING 2.00 Nos

Prepration earth station.excavation earth and backfilling with black cotton soil for the earth station,the earthpit size is 1000x1000x2500mm deep.S/F of copperplate of size 600x600x3.0mm S/F OF 25X5MM 3mtrs.Copper strip from copper plate to earth terminal,S/L inposition 15mm,2mtr. G.I.'8' class pipe for watering,S/L of75 kg.charcoal 50 kg salt,S/L of 6 SWG hot dip G.I wirefrom earth terminal at earth station to earth busbar/poleetc.

..TOTAL Ei"ECTRicAL WORK TOTALRs/-

ABSTRACT FOR PROVISION OF INTERIOR AND FURNISHINGOF UNION BANK OF INDIA - A.T.M. AT NOHATA DAMOH M.P.

SCHEDULEOF RATESSr.No.

Description Unit Quantity Rate Amount

FURNISHING1 P& F24"x24 vitrified tiled flooring with 4" Smt

skirting of Johnson's ( Parlieto) make.Fixing in cement mortar 1:5, completewith cutting and points filling (OuterStairs area)

4.83

2 P& FZypsum in standard G.I. section Smtincluding fixing the same with G.I. wireand metallic nchore fasteners. The costshell include all the material, labourcontingency etc. complete.

4.22

3 Wall Paneling - Providing & applying Smt1"xl.5" allumium section frame workcovered with ACP red on rear wall ofATM machine and side wall of silvercolour.

11.2

4 Aircon P/F 6" powder coated aluminum Smtlouvers of approved colour. & make.

1.00

5 MAIN DOOR -Providing & fixing to thenew premises the Main door withcustomized handle. Door size, Approx3'x7' (Material & Labour) providing &Fixing glass door comprising ofapproximate 4" x 1.5" vertical & topmembers 5" x 1.5" middle and bottommemberas, approximate door closure ofHyper 151 approved make with 8 mm clearglass of Modifloat, Saint Gobain, make

Smt. 1.95

Sr.No.

Description Unit Quantity

1

Rate Amount

6 Providing & fixing to the new premisesthe External fixed glazing (Material &Labour) - comprising of 8 mm Modifloat,Saint Gobin, 5"x 1.5" alluminum sectioframe finishid with requmined colour &maica covered with 4mm ply above 7'-0" .regular teek wood partition finished insilver laminate

7

8

9

10

11

Fabrication work for porch construction Smtproviding & making porch comprising of50x50x6 ISA framed structure. Finishedwith A.C.PSheet stand red com. Make redcolor measurement shall be of angle usedfor making the porch.

Card Access Pillar - Providing & Fixingcard access pillar of size 61x6" (out-out)dimension with ACP redq. Colour accessunit with wiring& fitting.

Supply & fixing new premises theWooden flush door 2'Olx6'9" P&Fwoodenply door frame, 30-32mm thick solid coreflush door (front side finishid with ACPredcolour), hot pressed, grade with teakwoodlapping patties, SS hinges -3 nos. Onedead lock, finished with red ACP costinclusive

P&F aluminum sheet on top of the porch.This sheet to be covered with Bitumen orBitumen sheet. Proper sealing of bitumensheet with the existing structure/Plaster.

P& F Black granite slab of 18-20 mm.thickfixed entrance door & glazed partitionperiphery walls and outer stairs area.Fixing in CM 1:4, Complete round moldingto the edges and joints filling.

TOTAL

Smt

PerJob

PerJob

Smt

Smt

3.41

2.90

1.67

2.90

1

Say Rs.

Sr.No.

Description Quantity

4

Rate Amount

ELECTRICAL12.

13.

14.

Providing & fixing to the new premises 1 nothe Signage new wiring of 3x4mm &copper flexible wire & PVCconducting ofISl,Havells,or Finolex make complete withall accessories like saddles, bends etc.

Providing & fixing Recess mounteddecorative luminaire with new wiring ofCFL lamp recessedlx18w(300x300x80mmfixture with lamps of make Philips,Crompton, or Bajaj make.

Nos

Providing & fixing the new premises the Nos.recessed mounting luminaries with newwiring and approximate size 600x600mirror optics with 2x36w fluorescentlamps, fixture make Philips, Crompton,Bajaj Flourescent Lamp of Bajaj,Crompton, Philips make. The size of thefixture as per the manufacturer'sstandards, Copper ballast.

Per job

15. Earthing station - Approximate600x600xsmm copper plate earthingstations with earthing resistance less that3 ohm including watering GI pipe withfunnel excavation in soft murrum andbackfilling salt and coal filling layers,10"xl0" masonry chamber with sand

Per 1plaster, RCC or cast iron lid, earthingconnectivity to be in 10SWB copper wire No.

in PVCconduit from bottom of the pit tothe existing ground level, complete.

16. Providing & fixing two No. one Ton 3star .A.C. of Voltas/L.G. standard makewith Timer & stabilizer Per No 2

17. Providing & fixing to the new premises Per No 1with the new wiring of Electrical with UPScabling (Material + labor + Wastage) P& FCrab Tree Havells, MK, CPLAnchor makeswitches / sockets, wires of Finolex, ,Polycab or Crabtree Havells make, 5/15

1

Sr.No.

Description Quantity Rate Amount

18

19

socket with 16A switch 9 points

5

No

comprising as ATM-2 nos. NIU-2 nos., oneeach for monitor, camera, text interface,card access and spare power point, 2 nos.metal clad with 20A MCB for Aircons, 2nos. metal clad with 20A MCB for UPSinput and output 6 nos. light pointscomprising of 6A Single switch for tubelights, spotlights, signage, internalearthing with 1/18 earthing, spotlights,signage, internal earthing with 1/18earthing wire 4 sqmm - 3 core cable foraircons, and 1.5 sqmm wire for lightpoints, 3 phase 4 way distribution box ofCrabtree Havells, MDS or indoorsequivalent make with 4 Pole ELCB63A300ma appropriate nos. of 20-30 A SPMCBs,40A 2 Pole MCB 1 nos, all the wiring to bein PVC conduit with proper saddling andbends wherever necessary. For UPS P&FSPNDBwith appropriate MCBs 2 nos. 15Acable tops cables for input and output toand from UPS

Providing and fixing Data cable for A.T.M. MMachine.

Providing and fixing 1.0. Box.

GRAND TOTAL(Furnishing + Electrical) Say

1

Total Furnishing + electrical + ATM

Discount If Any

Final Total