Tampere University, Tampere (Finland) arXiv:1908.11590v1 ...
Structural engineering research in TUT · TAMPERE UNIVERSITY OF TECHNOLOGY Faculty of business and...
14
TAMPERE UNIVERSITY OF TECHNOLOGY Faculty of business and built environment, Department of Civil Engineering Research Centre of Metal Structures, Seinäjoki, Tampere METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 1 Structural engineering research in TUT Markku Heinisuo Professor of Metal Structures Tampere University of Technology Seinäjoki, Tampere, Finland
Transcript of Structural engineering research in TUT · TAMPERE UNIVERSITY OF TECHNOLOGY Faculty of business and...
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 1
Structural engineering research in TUT
Markku HeinisuoProfessor of Metal Structures
Tampere University of TechnologySeinäjoki, Tampere, Finland
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 2
Tampere, the third largest city in FinlandLargest non-costal city in Scandinavia
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 3
• Established in 1965• Started operating in the form of a foundation in 2010• 9,200 students (2014)• Collaborates with 230 universities around the world• Quality assurance system audited by The Finnish
Higher Education Evaluation Council in 2014
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 4
TUT in numbers in 2014
Degrees BSc 687MSc (Tech/Arch) 812Licentiate and Doctor 99
Students in total 9,163Undergraduate 7,927Postgraduate 1,236
Total funding, EUR million 167 Budget funding 82Supplementary funding 85
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 5
Undergraduate students of technology in Finland in 2014
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 6
Organization Chart of TUT
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 7
Department of Civil Engineering
Four units of department:
Earth and foundation structures
Structural engineering
Construction management and economics
Sustainable design and developement
www.tut.fi/rak/en
Head of Department, prof. Matti PenttiVice Head of the Department, prof. Kalle KähkönenDevelopment Manager, Pertti Iso-Mustajärvi
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 8
STRUCTURAL ENGINEERING:
Research areas: – Building Physics – Renovation– Structures– Fire Resistance of Structures– Mechanics of Structures– Research Centre of Metal Structures
Professors:Markku HeinisuoAnssi LaaksonenJari MäkinenMatti Pentti, Head of DepartmentJuha VinhaMikko Malaska
Personnel about 40
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 9
Research Centre of Metal Structures– Established 2004 – Staff: about 10– www.metallirakentaminen.fi
On going projects– 3 industrial projects – RFCS project RUOSTE, final report up to March 2016– National FIMECC/MANU/DIGIMAP project (Industry + Tekes)– National TUTL project Sorvi (Tekes). New business from optimization– Own basic studies
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 10
FIMECC/MANU/DIGIMAP– FIMECC= Finnish Metals and Engineering Competence Cluster– Our scope: Optimization platform for HSS structures– 2 PhD theses going on: Teemu & Pekka– Industrial application: Design Tool for Ruukki– Co-operation with Ruukki, Oulu University, HAMK, St Petersburgh
and KU Leuven– Integration of design and fabrication, feature based cost models,
automatization et al– First structures including S500 & S700 steel have been delivered to
sites!
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 11
3D component method in normal and fire conditions– Two PhD theses near final, Henri & Hilkka– One PhD thesis just started, Jolanta– One PhD thesis going on, Juha– Aluminium joints, Jari
Henri: End plate joint in biaxial bending in normal conditionsHilkka: End plate joint in biaxial bending in fire conditionsExperiments, theory: FEM + component method
Jolanta: Tubular joints in fireExperiments, theory: FEM + component method
Juha: Torsion in component methodExperiments, theory: FEM + component methodUniversal joint, End plate joint
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 12
Moment-rotation relationship of welded tubular HSS joints– Co-operation with Hämeenlinna: Tavastia, HAMK, PhD thesis
Jarmo– Co-operation with Peter the Great St. Petersburg Polytechnic
University, PhD thesis Marsel– Research questions:
• Effect of weld size to stiffness and resistance of joints• HSS joints, welds• Different welding technologies (manual, robot)• Welding durations, measured, theory• Effect of axial load (of chord or column) to stiffness and
resistance of joints
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 13
Moment-rotation relationship of welded tubular HSS joints– Results so far:
• A lot of FEM simulations• Effect to buckling• Surrogate models => next step optimization• Tests in HAMK welding in Tavastia =>
– Interesting new way in co-operation at three levels!
TAMPERE UNIVERSITY OF TECHNOLOGYFaculty of business and built environment, Department of Civil Engineering
Research Centre of Metal Structures, Seinäjoki, Tampere
METNET Workshop 9-10.2.2016 Tampere, Markku Heinisuo 14
Moment-rotation relationship of welded tubular HSS joints– Results so far: (cont)
