StringPin Pinsetter - Online Bowling Solutiononlinebowlingsolution.com/catalogues/CatSP.pdf ·...

1

StringPin Pinsetter

Service Parts Catalog

April 2012 / 55-900002-000

Ten Pin

2

StringPin Pinsetter Service Parts Catalog

© April 2012 by the Brunswick Bowling and Billiards Corporation. All rights reserved.

Reorder Part No. 55-900002-000

Notice: If available, updates to this catalog can be found on-line at www.brunswickbowling.com.

Confidential proprietary information. All information contained in this document is subject to change without notice.

Brunswick Bowling & Billiards Corporation525 West Laketon AvenueP.O. Box 329Muskegon, MI 49443-0329U.S.A.

231.725.3300

3

Contents

Section A Frame

Frame Assembly ..................................................................................................................................................2Central Frame Block ............................................................................................................................................4Clutch Jam Mechanism .......................................................................................................................................6Chain Drive Assembly .........................................................................................................................................8String Lever Assembly .......................................................................................................................................10Main Frame Assembly .......................................................................................................................................12Intentionally Blank Page ....................................................................................................................................14

Section B Pit

Section C Pin System

String Pin Controllers...........................................................................................................................................2Return Lever Assembly .......................................................................................................................................4Setting Platform Assembly...................................................................................................................................6

Section D Electronics

Switch Cluster......................................................................................................................................................2

4

Select Only Genuine Brunswick Replacement Parts for Brunswick Equipment

You purchased the best when you bought Brunswick equipment. Insist on the best in replacement parts. Buy Genuine Brunswick Replacement Parts to keep your equipment in top-notch working condition.

Here’s why you should insist on Brunswick Replacement Parts for your Brunswick equipment:

• OnlyBrunswickreplacementpartsareguaranteedtobethesame,topquality, heavy-dutypartsthatgointotheworld’sfinestequipmentbyBrunswick.

• Rigidqualitycontrolassuresmaximumprotectionagainstpartdefectorfailure.

• Full-timetestingofallequipmentandcontinualupdatingofpartsprovidesthelatestimprovements.

• Eachimprovedpartisdesignedtobeinterchangeablewiththepartitisreplacing.

• Efficientcostmethodsofproductionanddesign,reducethecostofparts.

ToplaceanordercontactyourcertifiedBrunswickpartsdistributororBrunswickat1-800-YES-BOWLor231-725-3300. Authorized Brunswick part distributors listings can be found on-line at www.brunswickbowling.com

For catalog comments or questions please e-mail: [email protected]

5

WARRANTY

• Warrantycoveragestartswithdateofpurchase.

• Thewarrantycoverageperiodis90daysonmaterials.

• RepairorreplacementpartsisattheoptionofBrunswick.

• CallyourauthorizedBrunswickPartsDistributorforpartswarrantytransactionprocess.

6

Intentionally Blank Page

April 2012 1A

Section A

Frame

2A April 2012

Index No. Part No. Description

1. 55-100782-000 Short Angle 2. 55-100787-000 Brace Assembly (right-hand) 3. 55-100787-000 Brace Assembly (left-hand) 4. 55-100788-000 Long Angle Support 5. 55-100789-000 CrossOverAngleSupport 6. 55-100790-000 Mount Bracket 7. 55-100791-000 Short Brace 8. 55-100792-000 Diagonal Brace (side frame) 9. 55-100793-000 Cross Tie Bracket 10. 55-100794-000 MountBracket(ElectricalBox) 11. 55-100795-000 Diagonal Brace (electronics mounting bracket) 12. 55-110847-002 ElevatorStringKickback(left-hand) 13. 55-110847-003 ElevatorStringKickback(right-hand) 14. 55-110848-000 CommonKickback 15. 11-051703-001 Standard Nut (10 mm) 16. 11-051771-001 Lockwasher (10 mm) 17. 11-051019-001 HexHd.CapScrew(10mmx25mm) 18. 11-051032-001 HexHd.CapScrew(8mmx55mm) 19. 11-051770-001 Lockwasher (8 mm) 20. 84-200073-000 Barrel Nut 21. 11-051038-001 HexCapScrew(8mmx16mm) 22. 11-051704-001 HexNut(8mm)

Frame Assembly

April 2012 3A

Frame Assembly

4A April 2012


1. *55-100384-001 String Pan Guard 2. 55-060209-003 Turn Cam (right-hand) 55-060210-003 Turn Cam (left-hand) 3. 47-084939-004 Cable Guard (plastic) 4. 55-010058-003 Cross Support (rear) 55-010068-003 Cross Support (front) 5. 55-050658-003 Spring Support 6. 55-010232-003 Spring Guard 7. 55-010444-002 String Pin Guard 8. 55-010186-003 Mounting Bracket 9. 55-010032-001 Side Frame (left-hand) 10. 55-010031-001 Side Frame (right-hand) 11. *55-010403-002 String Guide 12. 11-054900-001 Self Tapping Screw (4.8 mm 13 mm) 13. 11-051038-001 HexHd.CapScrew(8mmx16mm) 14. *11-051035-001 HexHd.CapScrew(6mmx16mm) 15. *11-052022-001 FlatWasher(6mm) 16. 11-051743-001 SelfLockingHexNut(6mm) 17. 11-052003-001 FlatWasher(8mm) 18. 11-051744-001 SelfLockingHexNut(8mm) 19. 11-051005-001 HexHd.CapScrew(10mmx20mm) 20. 11-052018-001 FlatWasher(10mm) 21. 11-051745-001 SelfLockingHexNut(10mm) 22. *11-082549-001 SelfTappingScrew(#8x1-1/2”) 23. **55-010553-004 StringShorteningShaftw/Bushings 24. ***55-010088-001 String Pan Guard Assembly

* Not sold Separately - order index number 24.

** Includes 2 each of required Bushings, Plugs, Screws and Washers.

*** Includes index nos. 1, 11, 14, 15, and 22.

Central Frame Block

April 2012 5A

Central Frame Block

6A April 2012

Clutch Jam Mechanism


1. 55-050638-004 Pivot Rod 2. 99-010123-004 Nylon Bushing 3. 55-050613-004 Clutch Jam Cam 4. 55-050636-004 Clutch Spring 5. 11-053580-000 Jam Switch 6. 55-050614-003 Clutch Cover 7. 11-054900-001 SelfTappingScrew(4.8mmx13mm) 8. 11-051028-001 HexHd.CapScrew(6mmx25mm) 9. 11-051702-001 StandardHexNut(6mm) 10. 11-052005-001 FlatWasher(5mm) 11. 11-052214-001 MachineScrew(3mmx20mm) 12. 11-051710-001 StandardHexNut(3mm) 13. 11-052008-001 FlatWasher(6mm) 14. 11-051743-001 SelfLockingHexNut(6mm) 15. 11-051746-001 SelfLockingHexNut(3mm) 16. 11-053625-001 Stop Collar 17. 11-053102-001 Set Screw

April 2012 7A

Clutch Jam Mechanism

8A April 2012

Chain Drive Assembly


1. *55-060208-003 Drive Gear 2. 55-060220-004 Drive Tension Spring 3. *55-060419-002 Drive Chain Guard 4. 55-010412-004 Guide Bracket Support 5. 55-010556-004 Guide Bracket 6. 55-010553-004 Guide Rod 7. 55-060520-003 Drive Gear Guard 8. 55-060463-002 Short Chain Guide 9. 55-060418-002 Long Chain Guide 10. 55-060207-003 Tension Bracket 11. *11-053483-001 Quick Lock 12. 11-051035-001 HexHd.CapScrew(6mmx16mm) 13. 11-051743-001 Self Locking Nut (6 mm) 14. *11-051745-001 Self Locking Nut (10 mm) 15. 11-051019-001 HexHd.CapScrew(10mmx25mm) 16. 11-051771-001 Lockwasher (10 mm) 17. 11-051028-001 HexHd.CapScrew(6mmx25mm) 18. 11-052022-001 FlatWasher(6mm) 19. 11-051702-001 StandardHexHd.CapScrew(6mm) 20. 11-052206-001 HexHd.CapScrew(4mmx25mm) 21. 11-052021-001 FlatWasher(4mm) 22. 11-051741-001 Self Locking Nut (4 mm) 23. **55-060492-009 Drive Chain Guard Assembly

* Not sold separately - order index number 23.

** Includes index nos. 1, 3, 11, and 14.

April 2012 9A

Chain Drive Assembly

10A April 2012

String Lever Assembly


1. 55-050658-003 Spring Support 2. *55-050639-004 Spring Hook 3. 55-050635-004 Tension Spring 4. *55-050621-003 Reel Support Bracket (left-hand) 5. *55-050634-004 Torsion Spring 6. *55-050633-003 Reel 7. *55-050637-004 Reel Shaft 8. *55-050622-003 Reel Support Bracket (right-hand) 9. 55-050607-003 Support Arm 10. 55-050994-004 Rod Support Cover 11. 55-050652-004 String Lever Shaft 12. 55-050375-004 Reel Support Rod 13. *11-051083-001 Screw(6mmx60mm) 14. *11-051743-001 Nut (6 mm) 15. *11-053478-001 Quick Lock 16. 11-053616-001 Stop Collar 17. 11-053104-001 Set Screw 18. 11-051005-001 HexHd.CapScrew(10mmx20mm) 19. 11-051771-001 Lockwasher (10 mm) 20. 11-052018-001 FlatWasher(10mm) 21. 11-051745-001 Self Locking Nut (10 mm) 22. 11-051038-001 HexHd.CapScrew(8mmx16mm) 23. 11-052003-001 FlatWasher(8mm) 24. 11-051744-001 Self Locking Nut (8 mm) 25. 75-110012-000 Roll of String (55 m) 26. **55-050620-002 String Lever Reel Assembly


** Includes index nos. 2, 4, 5, 6, 7, 8, 13, 14, and 15.

April 2012 11A

String Lever Assembly

12A April 2012

Main Frame Assembly


1. 99-040115-002 DriveMotor(1/2HP) 2. 55-010186-003 Inside Cover 3. 11-053908-000 V-Belt 4. 55-010183-004 Motor Pulley 5. 99-070162-002 Drive Pulley 6. 55-020385-003 1:1 Gear 7. 55-010187-001 OutsideDriveCover 8. Motor Support Rod 9. 55-060237-004 Cross Shaft 10. *55-020415-003 Cam Shaft Housing 11. 55-060218-004 Cam 12. 11-053619-001 Stop Collar 13. 55-060207-003 Tension Bracket 14. *55-020308-004 Spur Gear 15. *11-430007-000 Bearing 16. **55-020395-003 BearingBracket(notsoldseparately,seebelow) 17. **55-020393-003 BearingRetainer(notsoldseparately,seebelow) 18. **55-020405-003 DriveGear(notsoldseparately,seebelow) 19. *11-053506-000 Key(5x5x75mm) 20. Support Rod 21. Bracket (left-hand) 22. Stop Collar 23. **55-020400-002 PinionGear(left-hand)(notsoldseparately,see

below) 24. **55-020401-004 PinionGear(right-hand)(notsoldseparately,see

below) 25. 55-010184-004 Motor Mount Bracket 26. *11-053504-000 Key(5x5x45mm)(notsoldseperately,see

below) 27. *55-020392-004 CamShaftBearingRetainer(notsoldseparately,

see below) 28. *55-020414-003 CamShaft(notsoldseparately,seebelow) 29. 99-020163-004 Motor Tension Spring 30. 11-053616-001 Stop Collar 31. 11-053104-001 Set Screw 32. 11-053101-001 Set Screw 33. 55-010182-004 Motor Tension Strap 34. 11-054900-001 SelfTappingScrew(4.8mmx13mm) 35. 11-051743-001 Self Locking Nut (6 mm) 36. 11-052008-001 FlatWasher(6mm) 37. 11-051018-001 HexHd.CapScrew(6mmx20mm) 38. 11-051005-001 HexHd.CapScrew(10mmx20mm) 39. 11-051771-001 Lockwasher (10 mm) 40. 11-051028-001 HexHd.CapScrew(6mmx25mm) 41. 11-051702-001 Standard Nut (6 mm)

* To order these items, use part number 55-020316-009 Cam Shaft Assembly Complete

** To order these items, use part number 55-020321-009 for left-hand Bearing Assembly or 55-020320-009 for a right-hand Bearing Assembly

April 2012 13A

Mani Frame Assembly

14A April 2012


April 2012 1B

Section B

PitInformation regarding Pit End Service Parts will be available soon.

Check the web site, www.BrunswickBowling.com, for future revisions.

2B April 2012


April 2012 1C

Section C

Pin System

2C April 2012

String Pin Controllers


1. 99-050126-003 Reed Switch Assembly 2. 55-040443-004 Solenoid Bracket 3. 55-040439-004 Solenoid Bracket 4. 55-040438-004 Pin Controller Solenoid 5. 55-040440-004 Plunger Bracket 6. 55-040437-004 Plunger 7. 55-040436-004 Solenoid Link 8. 55-040431-004 String Holder Cam 9. 55-040432-004 Switch Gear 10. 99-020164-004 Compression Spring 11. 11-053477-001 Starlock Speed Nut (7 mm) 12. 55-040427-001 Inside Pin Controller Housing 13. 11-050201-001 Washer(8.4x17x8mm) 14. 55-040130-004 String Pulley 15. 11-054004-001 RollPin(8mmx45mm) 16. 55-040428-001 OutsideControllerHousing 17. 55-040433-004 String Adjustment Gear 18. 55-040434-004 Switch Activator 19. 11-053481-001 Starlock (5 mm) 20. 11-051005-001 HexHeadCapScrew(10mmx20mm) 21. 11-051745-001 Self Lock Nut (10 mm) 22. KepsNut 23. 55-040426-001 Single Controller Assembly 55-040448-009 Controller Assemblies (set of 10 single Controller

Assemblies)

April 2012 3C

String Pin Controllers

4C April 2012


1. 55-030235-003 Pull Shaft 2. *55-030195-004 Spacer 3. *55-030708-003 Lever (right-hand) *55-030709-003 Lever (left-hand) 4. *55-030197-003 Common Lever 5. *55-030198-004 Spacer 6. *55-030200-004 Roller 7. *55-030199-004 Spacer 8. **55-030196-003 Return Lever Housing 9. **55-030408-004 String Pulley 10. **55-030404-004 String Pulley 11. **11-051742-001 Nut (5 mm) 12. *11-052451-001 Screw(6mmx25mm) 13. *11-051743-001 Nut (6 mm) 14. **11-052217-001 Screw(5mmx25mm) 15. 55-060240-001 Chain Assembly Complete 16. 55-060212-003 Special Link 17. 11-600500-000 Master Link 18. 55-030202-009 ReturnLeverHousingAssembly(includesindex

nos.8,9,10,11,and14) 19. 55-030204-009 LeverAssemblyComplete(right-hand,includes

indexnos.2,3,4,5,6,and7) 55-030205-009 LeverAssembly(left-hand,includesindexnos.2,

3,4,5,6,7,12,and13) 20. 11-053101-001 Screw,(special) 21. 55-030193-004 Pin

* Not sold separately - order item #19.

** Not sold separately - order item #18.

Return Lever Assembly

April 2012 5C

Return Lever Assembly

6C April 2012


1. 55-082630-001 Setting Platform 2. 55-080383-004 Vibration Mount 3. 55-082531-004 SquareWasher 4. 11-052618-001 CarriageBolt(10mmx50mm) 5. 55-082134-001 Lower Centering Guide Housing 6. *55-082136-004 Centering Guide Ring 7. *55-082135-003 Centering Guide 8. 11-052616-001 Screw(8mmx65mm) 9. *55-082608-004 SquareWasher 10. Centering Guide Mount Plate 11. **55-082609-004 Pin Head Stop Support 12. **55-082606-004 Pin Head Stop 13. **55-082280-004 Pin Head Mounting Plate 14. 11-051005-001 Bolt(10mmx20mm) 15. **55-082281-004 Pin Head Nut Plate 16. **11-051171-001 Washer(8mm) 17. **11-051704-001 Nut (8 mm) 18. **55-082279-003 String Pulley Housing 19. **55-030408-004 String Idler Pulley 20. **55-082081-001 Upper Centering Guide Housing 21. 55-081000-002 Platform Support Brace 22. 55-081031-001 Right Side Frame 23. 55-080239-003 Cross Support Brace 24. 11-051010-001 Screw(8mmx20) 25. 11-051038-001 Screw(8mmx20) 26. 11-051745-001 Nut (10 mm) 27. 11-051703-001 Nut (10 mm) 28. ***55-082031-004 Idler Pulley Shaft 29. ***55-080713-004 Screw(2mmx40mm) 30. 11-051744-001 Self Locking Nut (8 mm) 31. ***11-051743-001 Self Locking Nut (6 mm) 32. ***11-052008-001 FlatWasher(6mm) 33. 55-082270-009 String Pulley Housing Assembly Complete (in-

cludesindexnos.18,28,29,31,and32) 34. 55-082085-009 Upper Centering Guide Housing for pins #2 - #10

(includesindexnos.9,11,12,13,15,16,17,19,and 20)

55-082088-009 Upper Centering Guide Housing for pin #1 (includesindexnos.9,11,12,13,15,16,17,19,and 20)

35. 55-082138-009 CenteringGuideRingAssembly(includesindexnos. 6 and 7)

36. 63-860143-000 MaxPin(modified,10pinstringmachine)

* Not sold separately - order index number 35. ** Not sold separately - order index number 34. *** Not sold separately - order index number 33.

Setting Platform Assembly

April 2012 7C

Setting Platform Assembly

8C April 2012


April 2012 1D

Section D

ElectronicsInformation regarding addional elctronic Service Parts will be available soon.

Check the web site, www.BrunswickBowling.com, for future revisions.

2D April 2012


1. 99-050126-003 Cam Switch (Reed) 2. 55-070482-002 Cluster Cover 3. *55-070481-002 Cluster Housing 4. *55-070484-003 Cluster Gear 5. *11-053478-001 Starlock (8 mm) 6. *99-050181-004 Switch Holder 7. *99-050157-002 Amphenol Housing 8. 11-054900-001 SelfTappingScrew(4.8mmx13mm) 9. *11-052025-001 FlatWasher(4.3mmx9.8mm) 10. *11-053203-001 PanHd.Screw(4.2x16mm) 11. *11-053206-001 PanHd.Screw(2.9mmx19mm) 12. 11-052005-001 FlatWasher(5.3mmx10mmx1mm) 13. *11-051035-001 HexHd.CapScrew(6mmx16mm) 14. *11-052022-001 FlatWasher(6mm) 15. *99-050160-004 Switch Holder 16. 55-070473-002 Cluster Housing Assembly Complete (includes all

indexnos.except2,8,and12)


Switch Cluster

April 2012 3D

Switch Cluster

4D April 2012


StringPin Pinsetter - Online Bowling Solutiononlinebowlingsolution.com/catalogues/CatSP.pdf ·...

Documents

Transcript of StringPin Pinsetter - Online Bowling Solutiononlinebowlingsolution.com/catalogues/CatSP.pdf ·...