StrengThin 100 System_Stainless_PB-E497 Rev E
-
Upload
graeme-simmers -
Category
Documents
-
view
40 -
download
1
Transcript of StrengThin 100 System_Stainless_PB-E497 Rev E
THE WORLD LEADER IN PIPE JOINING SOLUTIONS
STRENGTHIN™100SYSTEMFOR THIN WALL STAINLESS STEEL PIPE
• No need for a highly qualified welder or fire watch
• No need for pickling or passivating the joint
• No weakening of the stainless steel material
• Total installed cost savings
• Easier material handling
• Faster installation
Scan for INSTALLATION VIDEO
ELIMINATE THE CHALLENGES OF WELDING STAINLESS STEEL PIPE
LUBE IT PUSH IT JOIN IT TIGHTEN IT
2 PB-E497 REV E
StrengThin™ 100 System
FOR THIN WALL STAINLESS STEEL PIPEStyle E497 Rigid Coupling is rated up to 16 bar | 232 PSI for use on various wall thicknesses.
FEATURES • Installation-Ready™ technology• Available from DN50 – DN300 | 2" - 12"• Coupling available galvanized or thermoplastic coated • No torque requirements• Gasket materials
– Grade "EHP" EPDM – Grade "EW" EPDM – Grade "EF" EPDM – Grade "T" Nitrile
APPLICATIONS • Cooling, chilled and heating water• Air with oil vapors• Potable water• And other stainless steel applications
Grooved Installation Process
Welded Installation Process
Grooved joint is
complete
Stage grooved pipe and fittings
Groove pipe
Center gasket, seat housing in
grooves
Bolt couplings metal-to-metal
Put on safety gear
Set up machine
Prep weld areaClean metal
before weldingSet the joint
4.5
4.2
4
3.7
3
2.7
2
1.6
0
WA
LL T
HIC
KN
ES
S (
mm
)
0 50/2" 65/76,1mm 80/3" 100/4" 125/139,7mm 150/6" 200/8" 250/10" 300/12"
COUPLING SIZE
• Minimum Wall Thickness • Maximum Wall Thickness
Below 3mm: 10 bar | 145 PSI
rating
•
••
•••
••••
• • •• • • • •
victaulic.com 3 PB-E497 REV E
THE VICTAULIC STRENGTHIN™ 100 SYSTEM IS THE INDUSTRY’S FIRST GROOVED MECHANICAL PIPING SYSTEM SPECIFICALLY DESIGNED TO PERFORM UP TO 16 BAR ON THIN WALL 304/316 STAINLESS STEEL PIPE.
Set the jointRepeat until fully filled
Build up a weld pool
Start the weldFill bevel between
pipe endsClean the slagFinish weld
NO CHEMICAL PIPE TREATMENT REQUIRED• Clean and uniform joint quality• No need for pickling or passivating• No weakening of the pipe • No risk of overheating the pipe
REDUCE LABOR RISK AND ENHANCE SAFETY• Fewer steps to install• Consistently faster pipe joints• Optimize crew size • No flames or noxious fumes
Pickle and passivate the
weld
Allow metal to cool
Purge the weld
WELDING STAINLESS REQUIRES OVER 88% MORE MAN-HOURS ON AVERAGE
INCREASE INSTALLATION SPEED• Installation-Ready™ technology• No disassembly, no loose parts• Visual confirmation of a proper installation• Install in every weather condition• Less installation steps
StrengThin™ 100 System
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
MA
N H
OU
RS
PE
R J
OIN
T
0 50/2" 65/76,1mm 80/3" 100/4" 125/139,7mm 150/6" 200/8" 250/10" 300/12"
PIPE SIZE
Installation-ReadyTM Weld
WHY THIN WALL STAINLESS STEEL?
• Increase the life of the system • Eliminate the cost of pipe coating• Save on costs and time for flushing the system• Ease of material handling • Reduce system weight
victaulic.com
PB-E497 8491 REV E 04/2016Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.
© 2015 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
For more information about the StrengThinTM 100 system, visit www.StrengThin100.com
FASTER AND CLEANER JOINTS RESULT IN FASTER COMMISSIONING AND LOWER TOTAL INSTALLED COST
REDUCE TOTAL INSTALLED COST
• Optimize crew size• No cost for fire permit• No highly qualified welder required• Increase on-site efficiency
NEW UNIQUE GROOVE PROFILE
• No pipe flare possible• Increased coupling engagement• Tool rental package includes: – Tool and roll sets – Pipe cutter – Pipe stand – Go/No-Go pipe cable
400
350
300
250
200
150
100
50
0
WE
IGH
T (K
g)
0 50/2" 65/76,1mm 80/3" 100/4" 125/139,7mm 150/6" 200/8" 250/10" 300/12"
PIPE SIZE
StrengThin 100
Carbon Steel