Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing
description
Transcript of Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing
![Page 1: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/1.jpg)
Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing
Pacific Northwest Pollution Prevention Resource Centerpractical solutions for economic and environmental vitality
November 2010
![Page 2: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/2.jpg)
Sleuthing for Pollution Prevention Opportunities
Why?What and Where?
How?
Adding the Green to Lean
![Page 3: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/3.jpg)
Prevention and Avoidance Trumps (The Environmental Hierarchy)
BPEO = Best Practicable Environmental Option
![Page 4: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/4.jpg)
Why Look for Waste and Toxics? $$
Do you give a 2nd thought to the true cost of “wastes”? – What is the cost to pre-treat wastewater?
• permitting fees• buffering chemicals• energy • sampling & testing time and expense• disposing of any dewatered or filtered solids• filtration supplies• disposal of packaging from purchased supplies• maintenance of the pre-treatment system
– What is the annual cost of lighting and heating unused space?– What is the cost of discarding unusable packaging
• Really paying supplier• Pay for disposal ($200/ton in Seattle)
![Page 5: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/5.jpg)
Why Look for Waste and Toxics?
• Reduce Toxics – Human, Environmental, Business Benefits– Indoor air quality at the workplace– Effluent and emissions released to the environment – Exposure to employees and end users of products
containing potentially toxic materials (Phthalates in your shower curtain)
– Reduced liability – Reduced permitting or regulatory burden
![Page 6: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/6.jpg)
Where to Look for Waste and Toxics?
• Production• Facility • Grounds• Maintenance • Pollution control and waste management
systems• Office/administrative operations
![Page 7: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/7.jpg)
Where? In Production
– Waste process heat – Inefficient use or overuse of water, energy, compressed
air, materials– Overspray or over-applied coatings– Overprocessing (e.g., curing parts longer than necessary)– Scrap and rework– Inventory that is unusable or expired– Idle equipment – Other non-product output (filters, cutting fluids, tumbling
media, floor coverings, cleaning or processing solvents)
![Page 8: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/8.jpg)
Where? At the Facility (Inside and Out)
– Facility drains – Storm drains– Floors– Chemical and raw material inventory– Dumpsters, garbage cans, scrap piles– Material movement equipment (forklifts, cranes,
fleets)– Unnecessary lighting– Lush, green landscaping (pesticides, water use)
![Page 9: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/9.jpg)
Where? In Maintenance
– Lubricants– Hydraulics– Machine shop – Cleaning materials, chemicals and rags
![Page 10: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/10.jpg)
Where? In Pollution Control and Waste Management
– Bag house dust– Filtrates from stills, baths, wastewater treatment– Dewatered solids– Hazardous waste collection or accumulation area– Throughout production and chemical management
or storage areas
![Page 11: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/11.jpg)
Where? In Administration
– Paper and office supply use– Printing and copying “culture”– Employee cafeteria or food consumption (including
packaging)– Unused space heating and cooling– Employee commute
![Page 12: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/12.jpg)
How to Look for Wastes and Toxics? • P2 audit or checklist templates• VSM / Process mapping adding inputs/outputs• Invite the third party inquisition on a walkthrough
or assessment (Someone not familiar with day to day)
• Material balance• Scrap rates• Dumpster dive (and other solid waste
piles/collections)• Purchasing records and bills (materials, all utilities)• Senses: Smells, Sights, and Sounds• Publically available emissions or materials data
![Page 13: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/13.jpg)
Examples: Process Specific P2 Checklist Excerpt for Metal Finishing
Parts Cleaning: Mechanically pre-clean parts as much as possible first. Determine level of cleaning needed. Work with the supplier to use a corrosion inhibitor more easily removed or
compatible with the cleaning system used on site. Arrange for JIT delivery to reduce or eliminate need for corrosion protection. Use a lower vapor pressure cleaner. Use an aqueous cleaner.Reduce Drag Out Losses: Extend drip time; install drip racks. Install drainage boards between tanks to route drag out into the correct
process tank. Reduce workpiece withdrawal rate from the chemical bath. Install air knives or water misters to remove drag out. Lower the concentration of plating bath constituents, increase the plating
solution temperature. Both actions will reduce solution viscosity to enhance runoff.
Rack workpieces being plated so that cavities open downward to promote draining.
Use non-ionic wetting agents ….
![Page 14: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/14.jpg)
Examples (How)Pre-Assessment Baseline Metrics
Sales Revenue (Annual) Units Produced
Working Days / Year
Number of Shifts / Day
SITE & PROCESS EQUIPMENT DESCRIPTION OF USE / TYPE OF EQUIPMENT
QUANTITY
TOTAL VOLUME
Number of Buildings
Delivery Vehicles -
Fork Lifts -
Water Treatment
Nitrogen Assist spray equipment
Cure ovens
Other
INPUTS – ANNUAL QUANTITY U/M EXPENSE DESCRIBE USE / LISTConsumables (List metrics for any commodities you might want to look at)
Paint $
Degreaser
Other Solvents
Process Additives/Consumables $
Water Treatment Chemicals $
Abrasives & Polishes
Public Water Consumption
Water Source:
Gal $
Diesel Fuel - Gal $
Gasoline Fuel - Gal $
Propane Fuel - Gal $
Bio Fuels $
Etc. Etc. ,
(See Handout)
![Page 15: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/15.jpg)
Current State Value Stream Map (Unmodified)
Market Forecast
Total Lead Time = 10 days Value Added Time = 15 min
CustomerA
2 people
C/T = 4 minC/O = 3 hrUptime = 61%
Assembly &Inspection
2 people
Milling
C/T = 2 minC/O = 2 hrUptime = 74%
3 people
C/T = 7 minC/O = 4 hrUptime = 48%
Painting
I I I3 people
Shipping
7 min4 min2 min
1 day 2 days2 days 3 days
Production ControlAnnual Production Plan
Weekly delivery schedule
Wee
kly
sche
dule
Daily schedule
Daily scheduleWK
I
5 days
D ID
30 daysWK
Receiving
C/T = 2 minC/O = 30 minUptime = 93%
Welding
2 days
2 min
CustomerBSupplier
1Supplier
2
![Page 16: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/16.jpg)
Current State Value Stream Map (Modified with Materials)
Materials lines can be developed for any major material source used in processes and products
2 people2 people
Milling
II
Welding
EHS EHS
5 lbs8 lbs
10 lbs12 lbsMaterials Used = 22 lbs Materials Needed = 13 lbsMaterials Wasted = 8 lbs
Top line: Materials Used by Process
Bottom line: Materials Added to Product During the Process
![Page 17: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/17.jpg)
Current State Value Stream Map (Modified with Water & Materials)
1 person1 person
Surface Prep
II
Paint
EHS EHS
7 lbs2 lbs
10 lbs5 lbs
Materials Used = 15 lbs Materials Needed = 9 lbsMaterials Wasted = 6 lbs
Water Used
5 gal2 gal
Water Used = 14 gal Water Needed = 10 galWater Wasted = 4 gal
4 gal
1 personI
Purge Spray Line
EHS
Materials Used
Materials Needed
Water Needed
5 gal
N/A
0 lbs
3 gal
5 gal
![Page 18: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/18.jpg)
Solvent (with paint residuals)
Air leaks, GHGs
Current State with Inputs/Outputs(Akin to Process Mapping)
Surface Prep Paint Purge Spray Line
Grit & additives
EnergyWater
Compressed Air
Spent grit
Contaminated water
Fugitive dust
Greenhouse gases (GHG)
Paint & Solvent
Compressed Air/Energy
Filters, Nozzles, Masking,
Rags
Air leaksSpent
filters, masking tape and paper,
nozzles, rags
Air leaks, GHGs
Surplus paint &
solvent, & solvent-
laden rags
Overspray
SolventCompressed
Air/Energy
Hazardous/toxic Water Related Non-haz Waste Energy
Wastewater Pre-treat
Filters Buffer chemicals
EffluentSolids, filters
![Page 19: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/19.jpg)
Examples: Diagram Inputs/Outputs
![Page 20: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/20.jpg)
Super Sleuthing for Opportunities• PPRC or other facility walkthrough list (handout)
• Research the process beforehand, especially common wastes, emissions, effluent, etc.
• Research available emissions or waste data (TRI, Fire Marshal, state data)
• Research their permit status
• Identifying potential opportunities is not (usually) rocket science, moreso an inquisitive way of thinking about pollution and avoidance.
• There’s never a stupid question! Leave no stone unturned.– Even if a question or idea turns out to be infeasible, it spurs further thinking
and a possible trail to other opportunities or solutions
![Page 21: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/21.jpg)
Opportunities – Understand their Emissions
![Page 22: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/22.jpg)
Super Sleuthing for Potential Solutions
• Contact PPRC to help research • Contact material or equipment suppliers for feasibility and potential cost savings• Review MSDS or other product specs on chemicals of potential concern• Utilize free tools and services
• WSU Energy Extension• Energy Star Profile• Alternatives databases (EPA DfE, SAGE, Cleaner Solutions)
• Additional expertise may be necessary for more in-depth analysis or feasibility evaluation of findings and recommendations– energy auditing and analysis expertise, – wastewater engineering, – chemical engineering, – extruding equipment– Spray paint efficiency training
![Page 23: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/23.jpg)
www.cleanersolutions.org
![Page 24: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/24.jpg)
www.p2pays.org/ref/19/18161/index.cfm.htm
![Page 25: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/25.jpg)
www.pprc.org/hubs
![Page 26: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/26.jpg)
Maximize Paint Transfer EfficiencyFinding: Poor painting techniques and transfer efficiency
Solution: STAR Spray Efficiency Training
Results: Woodfold Mfg. in Oregon has shown a minimum savings of $34,000 in paint costs and $4,000 savings in reduced filter changes.
![Page 27: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/27.jpg)
Maximize Transfer EfficiencyFinding: Variability in application of fiberglass and less than optimal transfer efficiency Results: Reduced overspray and variability in material thickness
![Page 28: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/28.jpg)
Material Use
Minimum Fill Line for Gun Operation
Before After
• Finding: Waste of about 1 gallon of paint with each custom color mix
• Solution: Alternative container
• Result: Reduced overproduction of custom color paints by 48 gallons/year
![Page 29: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/29.jpg)
Material Consumption (and Time)Canyon Creek Cabinet Company-Wood Waste (Washington)
Before: Lots of waste wood 368 sheets/day cut @ 120 sec/sheet = >12 hours
Solution: 3 new crosscut saws• Results: 219 cuts @ 21 sec/cut = 1 hour 17 minutes-----------------------------------------------------------------------• Reduction in time: 90% = $31,000• Reduction in sheets required: $194,000/year• Reduction in waste removal: 580,000 lbs/year
and $58,000/year
![Page 30: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/30.jpg)
Finding: Poor visibility and ergonomics resulted in inadequate detection of defects to repair prior to coating.
Solution: Hang panels in-line, better lighting, stand inspect
Results: Changes reduced cost of rework by $208,000/year, improved ergonomics, reduced material travel and handling.
Scrap and Rework (Lean Waste)Before After
After
![Page 31: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/31.jpg)
Scrap and ReworkPlastic Food Package Manufacturer
• Finding: 30% finished-product scrap rate and a “culture” that this is OK because they just regrind and put it back into the process. After all, it’s “recycling”!
We demonstrated the cost of this practice: “Back of envelope” calculation including material handling, grinding time, energy to re-extrude, grind, grinder maintenance, material: >$600k /year
A “lightbulb” moment
• Solution: Just communicating this cost to staff and the expectation to minimize this “scrap culture”, is expected to achieve 5% scrap reduction. They are working on optimizing downstream processes to maximize quality of the finished product and reduce the amount of rework.
![Page 32: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/32.jpg)
Water Use at a Food Processor
Finding: Use of heated water, with high-volume hoses and nozzles to clean up residual food processing waste from vessels and floor. (Especially intensive water use before processing Kosher foods).
Solutions: • Manual pre-cleaning• Some mechanical vessel cleaning• Switch to low-volume-high-pressure hoses and nozzles•Harder employee access to hoses; easier access to brooms/squeegies• Changed standard operating procedure.
![Page 33: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/33.jpg)
Water Use at a Food Processor
Results:
Found local composter to take all recovered solids – diverting at least 50% of previous volume from landfill
Projected reduction of heated water, and wastewater generation by 30%. This also reduces the amount of pre-treatment, treatment chemicals, water sampling and testing, and energy to heat cleaning water and run the pre-treatment system.
Wastewater savings are projected at 6 gallons/minute and $15,000 per year.
![Page 34: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/34.jpg)
Water Reuse
Nature’s Path (Washington project) -Finding: Trucked collected oven condensate to wastewater treatment facility over 100 miles away. -Solution: Condensate recapture system for reuse onsite as makeup water. -Result: Savings of >$12,000 per year in wastewater treatment costs (plus reduced time and expense of trucking the water)
Columbia Paint (Washington Project)Finding: Vessel wash water containing white pigment discharged to wastewaterSolution: Collection of white and off-white wash water to use for tank cleaningResults: Avoid annual use of 36,900 gallons of city water
![Page 35: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/35.jpg)
Toxics & Emissions Reduction
Canyon Creek Cabinet Company
Finding: >150,000 pounds volatile organic compound (VOC) emissions per year – pushing close to Title V air permit limits. One high VOC source was topcoat material for finished cabinets, which was applied twice to each panel.
Solution: Alternatives assessment and evaluation for substitute product. Identified a one-coat product that resulted in less overall VOC content for their coatings
Results: Reduced VOC emissions by 114,535 pounds/year. Now will not need to file for Title V air permit even with a 70% increase in production.
![Page 36: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/36.jpg)
Energy Efficiency
Paint CuringFinding: Neanderthal 60’ gas convection oven running 24/7Potential Solution: Replace with infrared or halogen curing system that can potentially save the energy cost per part by 20 %.
Utility Pole – Kiln DryingFinding: Inadequate kiln drying resulted in running poles through kilns twice because pole surface areas facing inward to the log stack were not drying.
Potential Solution: Optimize fans and air flow, add additional spacers between logs in the stack, to optimize drying around the entire circumference of the pole. (Unconfirmed if implemented or amount of energy reduced).
![Page 37: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/37.jpg)
ReuseFinding:
- Company purchase $18,000/yr. in biodegradable peanuts to ship products out, and -$Paid 280/month for two containers for recycling cardboard
Solution: - Shred cardboard and use in place of peanuts
Results: -Eliminated one recycling container- Annual savings $19,680 (after paying for the cardboard shredder)
Source: ConnStep Manufacturing Resource - Connecticut MEP)
![Page 38: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/38.jpg)
Reuse
![Page 39: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/39.jpg)
• Booty recycling at ON• Multiple lab refrigerators in a
refrigerated room – adding heat • Record storage in an unused building heated in
winter (in Idaho) for no other purpose than to keep fire sprinkler lines fluid in event of fire. (Suggestions? Transfer to e-data storage, or move records to another room in a building that requires heat anyway and has sprinklers).
Other Examples
![Page 40: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/40.jpg)
What to do with All The Great Ideas?
Low hanging fruit or Low-tech solutions?- JUST DO IT!!!! - Schedule a mini-kaizen event – internal or with
TechHelp to assist and facilitate- Have company establish an internal Green
Team to work on opportunities over time- PPRC’s rapid response service for potential
solutions
![Page 41: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/41.jpg)
Potential Metrics
Energy Metrics:
Environment Metrics:
Economic Metrics:
• Environmental savings identified• Lean savings identified• Other cost savings• One time potential cost savings
identified• Individuals trained• Jobs created• Jobs retained• Total annual potential impact identified• Number of small businesses engaged• Percentage of small businesses engaged• Number and value of SBA loans granted • Capital infusion dollars invested• Hours of counseling provided
• Air emissions reduced (lbs)• Solid waste reduced (lbs)• Material intensity per unit of production• Hazardous waste reduced (lbs)• Hazardous materials reduced (lbs)• Water pollution reduced (lbs)• Water used/conserved (gal)• Water intensity per unit of production
• Energy conserved (MM BTU/kWh)• Energy intensity per unit of production• Carbon reductions (tons)• Carbon intensity per unit of production
![Page 42: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/42.jpg)
Environment Metrics & Some Suggestions for Data Sources (Baseline):
• Air emissions (lbs)• Air permit – monitoring, reporting
• Solid waste (lbs)• # of dumpsters (density conversion)• Garbage can /dumpster dive
inspections• Rejected product• Recycling or composting bills
• Material intensity per unit of production• Hazardous waste (lbs)
• Waste manifests• TRI Data• Logs
• Hazardous materials (lbs)• MSDS• Purchasing records• Inventory records
• Water pollution (lbs) or wastewater (gal)• Storm water
• NPDES Permit• Wastewater
• Pretreatment Permit• Sewer Records
• Water consumed (gal)• Point of use or flow meters (if
available)• Utility Records
• Water intensity per unit of production
• Energy consumed (MM BTU/kWh)Defer to NEEA
• Energy intensity per unit of production
![Page 43: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/43.jpg)
Resources – Where to Get Help
• UW Industrial Assessment Center• Northwest Energy Efficiency Alliance • PPRC (Michelle)• Utilities• SBDC – Environmental Assistance Coordinator• City Public Works Staff• County
![Page 44: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/44.jpg)
Breakout Exercise
MetalTek (A “fabricated” metal fabrication and coating company)
Exercise: Review description of company, baseline metrics, and current state VSM
1) What obvious and potential opportunities do you see?
2) What questions would you ask the company?
![Page 45: Strategies for Identifying Pollution Prevention Opportunities via Lean Manufacturing](https://reader036.fdocuments.net/reader036/viewer/2022062408/56814374550346895daff225/html5/thumbnails/45.jpg)
Thanks for your Time
Contact PPRC at:
1402 Third Ave, Suite 1420 | Seattle, WA 98101T 206.352.2050 | F 206.352.2049| www.pprc.org
Michelle Gaither | Environmental Engineer | [email protected]
Pacific Northwest Pollution Prevention Resource Centerpractical solutions for economic and environmental vitality