• Thank you for purchasing this product.• Please read this Assembly and Instruction Manual prior to using this product.• File this manual in a safe place for future reference.

Storage Bed Small/Single/Semi-Double/Double

Assembly, Instruction Manual Retain for future reference

Caution

Read before Using This Product* Be careful not to damage floors or other furniture when assembling and installing this product.* This product requires two people for installation, moving.* Do not use electric power tools when installing fitting parts.

Completed View

Parts List

Assembly

Storage Bed

* This Assembly and Instruction Manual applies to all sizes of this product. Illustrations for assembly, instructions represent the Double Size version of this product.

* Several holes predrilled for ventilation

* Installation holes on back of crosspiece * Handles * No handles

Parts List

Drawer Unit/Left

* Several holes predrilled

for ventilation

Side Rail Drawer Unit Top Crosspiece

For Bottom Board/Open Space

For Bottom Board/Drawer Unit

Drawer Unit/Right

Head/Footboard A Head/Footboard B

* Installed on Connection Nut

* Installed on Connection Bolt *Installed on bolts

* Installed on bolts

*Installed on Drawer Units

(including two extra pieces)

Small X22Single/Semi-Double/Double X24 (including extra pieces)

Bolt/Short

Washer Stopper Felt Veneer Stickers

Allen Wrench/Large

Allen Wrench/Small

Bolt/Long Connection Bolt Connection Nut Spring Washer

Drawer

Remove

Lay out tarp/cloth (*not referenced in further steps)

First, lay out a tarp or cloth on the floor where you will assemble this product, and install the felt pieces securely to prevent damage to flooring. (Number of felt pieces differ according to product size/type) For details, refer to “Installing Felt” (separate).* For drawer units, first remove Drawer Unit before installing felt pieces in the step below.

Pull drawers slightly out from Drawer Units, and then remove Stoppers. After removing Stoppers, you can pull the drawers all the way out.

Use Connection Bolts, Connection Nuts, Spring Washers, and Washers in this step (four locations in total). Use Allen Wrench/Small to connect Drawer Units Left/Right.

Place Bottom Board for Open Space and Bottom Board for Drawer Units on top of the main unit.* Be sure the Bottom Board fits into the designed slots. The part with handles is

the Bottom Board for Open Space.

Next, pull drawers out, and install Stoppers.Cover the holes for the joint pins (for Head/Footboard expansion) with the Veneer Stickers to complete the bed.

Replace the drawers (removed in step ) in Drawer Units.

Use Bolt/Long, Spring Washer, and Washer in this step (eight locations total). Use the Allen Wrench/Large to attach (loosely) Head/Footboard A and B.

Use Bolt/Short, Spring Washer, and Washer in this step. Use Allen Wrench/Large to attach metal fittings, and install Side Rail.

At the top of the Drawer Unit, use the Allen Wrench/Large to gently tighten Bolt/Long, Spring Washer, and Washer on the Drawer Unit Top Crosspiece.Next, securely tighten Head/Footboard A and B to the Drawer Unit Top Crosspiece.

*Predrilled holes for ventilation

Washer

Spring Washer

Bolt/Long

Allen Wrench/Large

Head/Footboard B

Head/Footboard A

* Predrilled holes for ventilation

Spring Washer

Bolt/Short

Allen Wrench/Large

WasherMetal Fittings

Washer

Spring Washer

Bolt/Long

Allen Wrench/Large

Bottom Board for Open Space

Bottom Board for Drawer Unit

Handles

To prevent Bottom Boards from falling, install Bottom Boards so the handles face the interior of the unit.

• Bottom Board for Open Space will differ in size according to

the size of the bed.Caution

Caution

Joint pin holes

Stick on

InstallRemove

Stopper

Open Space

Drawer UnitBottom Board handles

Don’t install with handles facing the exterior of the unit.

* Read “Cautions” (separate) to ensure proper use of this product.

* The joint pin holes won’t be used unless you purchase an extension, sold separately.

VeneerStickers

Joint pin holes

Caution

Hold Connection Nut in place using the Allen Wrench/Small, and turn the Connection Bolt.

Drawer Unit Left and Right have different specifications. See the diagram below for proper installation and connection.

Allen Wrench /Small

Connection Bolt

Spring Washer

Washer

WasherSpring Washer

Connection Nut

Allen Wrench/Small

No gap Gap