Stora Enso at Interpack 2011: Primeforma
-
Upload
stora-enso -
Category
Technology
-
view
1.183 -
download
6
description
Transcript of Stora Enso at Interpack 2011: Primeforma
8/8/2011
Today 30% of the world’s food goes to waste, part of this due to bad packaging
Stora Enso at Interpack 2011
8/8/2011
• Ecological
• Economical
• Convenient
• Easy to implement
New efficient packaging and raw material needed
Stora Enso at Interpack 2011
8/8/2011
Primeforma – sustainable formed tray
An new fibre based packaging material Stora Enso at Interpack 2011
8/8/2011
Recyclable board trays for sliced meat packaging.
• Developed for thermoformed food packaging.
• The formability of board and the coating methods have developed new opportunities for consumer packaging
• Recyclability depend on local community and legislation
Stora Enso at Interpack 2011
8/8/2011
Primeforma benefit: sustainable
• Stiffness from Fibres– Renewable– Low CO2 Footprint
• High Barr properties from multi-layer-polymer-coating– Minimum oil based raw
material– Less than 13 % polymer
Stora Enso at Interpack 2011
8/8/2011
Primeforma benefit: used on existing packaging lines
• Primeforma can be used on existing packaging lines which were previously used for plastic film
Sealpac, Oldenburg
Stora Enso at Interpack 2011
8/8/201111
• High barrier polymer coating provides excellent light, oxygen, humidity and even grease protection
• High barrier coating can be made with peel ability property
• Information can be printed directly onto the surface of the board
• In paper recycling plastic coatings are separated and recovered either as energy or material and fiber used for new paper and board
• Primeforma Board 278 gsm + EnsoBarr Peel 41 gsm: high share of the material is coming from renewable resource
Primeforma
Stora Enso at Interpack 2011
8/8/2011
Fibre based packaging material is part of a modern and sustainable lifestyle
Stora Enso at Interpack 2011