Sticks & Stones Stock Catalog - Rapp Industrial
Transcript of Sticks & Stones Stock Catalog - Rapp Industrial
General CatalogAbrasive Products
Version: 2016.1
Quick IndexTable of Contents 1
Sharpening Stones 3
Tool Room & Die Files 9Polishing Stones 15
Machine Tool Stones 18Dressing Sticks 19Rubbing Bricks 20
Large Abrasive Files 21Jointer Stones 23
Honing Equipment 25Mounted Points 29
Terms & Conditions 35
Made in USA Abrasive Stone Solutions
Rapp Industrial Sales 724 789-7853 [email protected]
Table of Contents
1
Aren’t finding what you’re looking for? Call us and let us do the work for you.
Table of Contents
SHARPENING STONESAluminum Oxide Bench Sharpening Stones............Silicon Carbide Bench Sharpening Stones.............. Hard Arkansas Files.............................................. Arkansas Bench Sharpening Stones....................... Cutlery and Kitchen Sharpeners and Systems......... Axe Stones, Gouge Stone, and Finishing Sticks......
TOOL ROOM & DIE FINISHING STONESSquare Files........................................................Triangle Files.......................................................Round Files..........................................................Half Round Files...................................................Round Edge Slip Stones........................................Specialty Shape and Silversmiths’ Stones...............
POLISHING STONESPolishing and Finishing Stones ..............................
Includes EDM Stones, Moldmaker Stones, Diemakers Stones, Ruby Stones and General Polishers
Metal Polishing....................................................Cotton Fiber and Rubber Abrasive
MACHINE TOOL STONES.............................................Burr BreakersBoat Stones Machine Knife Stones
DRESSING STONES......................................................Silicon CarbideAluminum OxideBoron CarbideFor Diamond, CBN and Vitrified Grinding Wheels
345678
91011121314
15
17
18
19
Rapp Industrial Sales 724 789-7853 [email protected]
Table of Contents
2
Table of Contents
20
21
22
2324
25262728
2930-3132-34
35
RUBBING BRICKS........................................................Griddle BricksRubbing Bricks Rubbing Bricks with Handles
LARGE ABRASIVE FILESCore Files and Scythe Stones............................... Utility, General Purpose, Home & Garden and
Tradesmens’ Stone Files.............................
JOINTER STONESJointer Stones and Pattern Stones ........................ Stock Jointers and Pocket Jointer Stones...............
HONING TOOLS & EQUIPMENTASI Portable Hone Kits ½” to 3” .........................ASI Portable Hone Kits 3” to 21”.........................ASI Stone Sets and Accessories ..........................Flex-Hone Portable Tools ....................................
MOUNTED POINTS“A” Shape..........................................................“B” Shape..........................................................“W” Shape.........................................................
GENERAL INFORMATION ..........................................Includes Sticks and Stones Unl. Inc.’s Historyand Terms and Conditions
Rapp Industrial Sales 724 789-7853 [email protected]
Sharpening StonesAluminum Oxide Bench Stones
3
Sharpening Stones
Typical Applications:-Knives and chisels-Wood lathe cutters-Plane blades-Restoring cutting edge
Sin
gle
Gr
itC
om
bin
at
ion Size Grit Size Part # Norton # UPC #
730006Weight per
std pkgPackage
Qty
Minimum = 1-4
Standard= 5
1” Thick x 4 Dia.
Fine 320&
Coarse 120
AB-64 IB64 00004 7 lbs5/8 x 1¾ x 4 AB-134 IB134 00005 3 lbs3/4 x 2 x 5 AB-45 IB45 00003 4 lbs1 x 2 x 6 AB-6 IB6 00001 7 lbs1 x 2 x 8 AB-8 IB8 00002 8 lbs
Sharpening Oil - Meets U.S. Pharmacopia standards of purity for mineral oils
Size Part # Norton # UPC #730006
Weight per std pkg
4.5 oz XB-1 XB-1 00484 2 lbs1 Pint XB-5 XB-5 00486 5 lbs
1 Quart XB-2 XB-2 00485 10 lbs
Sharpening Stones
PackageQty
Minimum = 1-4
Standard= 5
Do you need Aluminum Oxide, or Silicon Carbide?
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Aluminum OxideSilicon Carbide is on the
following page.
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
1/4 x 1 x 4Fine AFB-14 FB14 00078
1 lbMedium AMB-14 MB14 00145Coarse ACB-14 CB14 00009
1/2 x 1 x 4Fine AFB-24 FB24 00079
2 lbsMedium AMB-24 MB24 00146Coarse ACB-24 CB24 00010
5/8 x 2 x 5Fine AFB-35 FB35 00080
4 lbsMedium AMB-35 MB35 00147
1 x 2 x 6Fine AFB-6 FB6 00076
7 lbsMedium AMB-6 MB6 00143Coarse ACB-6 CB6 00007
1 x 2 x 8Fine AFB-8 FB8 00077
Medium AMB-8 MB8 00144Coarse ACB-8 CB8 00008
8 lbs
Oil
Rapp Industrial Sales 724 789-7853 [email protected]
Silicon Carbide Bench Stones
Typical Applications:Knives and chisels- Wood lathe cutters-
Plane blades-Restoring cutting edge-
Don’t forget sharpening oil to enhance the stone’s performance (bottom pg3)
Co
mb
ina
tio
nS
ing
le G
rit
Size Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
1” Thick x 4 Dia.
Fine 320&
Coarse 120
SB-64 JB64 00450 7 lbs1½” Thick x 4 Dia.with Finger Groove SB-74 JB74 00451 6¼ lbs
5/8 x 1¾ x 4 SB-134 JB134 00453 3 lbs3/4 x 2 x 5 SB-45 JB45 00449 4 lbs1 x 2 x 6 SB-6 JB6 00446 7 lbs1 x 2 x 8 SB-8 JB8 00448 8 lbs
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
1/4 x 1 x 4Fine FSB-14 FJB14 00265
1 lbMedium MSB-14 MJB14 00380Coarse CSB-14 CJB14 00217
1/2 x 1 x 4Fine FSB-24 FJB24 00266
2 lbsMedium MSB-24 MJB24 00381Coarse CSB-24 CJB24 00218
5/8 x 2 x 5Fine FSB-35 FJB35 00267
4 lbsMedium MSB-35 MJB35 00382
3/4 x 2 x 8Fine FSB-48 FJB48 00268
5 lbs Medium MSB-48 MJB48 00383Coarse CSB-48 CJB48 00219
1 x 2 x 6Fine FSB-6 FJB6 00263
7 lbsMedium MSB-6 MJB6 00378Coarse CSB-6 CJB6 00215
1 x 2 x 8Fine FSB-8 FJB8 00264
8 lbsMedium MSB-8 MJB8 00379Coarse CSB-8 CJB8 00216
Sharpening Stones
4
Silicon Carbide Bench Stones
Sharpening Stones
Do you need Aluminum Oxide, or Silicon Carbide?
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon CarbideAluminum Oxide is on the
previous page.Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Rapp Industrial Sales 724 789-7853 [email protected]
5
Arkansas Stone
Carving Tools - Hard Arkansas only
Shape Size Part # Norton # UPC #730006
Weight per std pkg
3/16 x 7/8 x 2¼ HAS-22 HS22 00348 6 oz3/16 x 7/8 x 2¼ HAS-42 HS42 00350 4 oz
Package Qty
Minimum = 1-4Standard = 5
Specialty Shape Files - Hard Arkansas only
Shape Size Part # Norton # UPC #730006
Weight per std pkg
1/4 Rnd x 3-3½ HAF-813 HF813 00332 3 oz3/16 x 1/2 x 3-3½ HAF-823 HF823 00333 3 oz3/16 x 1/2 x 3-3½ HAF-833 HF833 00334 3 oz1/4 x 1/2 x 3-3½ HAF-843 HF843 00335 3 oz1/4 x 1/2 x 3-3½ HAF-853 HF853 00336 3 oz
1/4 to Point x 3-3½ HAF-863 HF863 00337 2 oz1/4 back x 1 x 3-4 HAF-873 HF873 00338 4 oz
Package QtyMinimum
= 1-4Standard
= 5
Arkansas Square and Triangle Files - Hard Arkansas only
Shape Size Part # Norton # UPC #730006
Weight per std pkg
1/4 Sq. x 3-3½ HAF-13 HF13 00326 2 oz3/8 Sq. x 3-3½ HAF-33 HF33 00327 5 oz1/2 Sq. x 3-3½ HAF-43 HF43 00328 7 oz1/4 Tri. x 3-3½ HAF-113 HF113 00329 2 oz3/8 Tri. x 3-3½ HAF-133 HF133 00330 3 oz1/2 Tri. x 3-3½ HAF-143 HF143 00331 4 oz
Package QtyMinimum
= 1-4Standard
= 5
Creates the ultimate, razor sharp, near mirror finish and long lasting edge.This stone does not require flattening and has the longest stone life. For useon a final edge after a fine grit oil stone or soft arkansas has shaped the edge.
Sharpening StonesHard Arkansas Files
Benefits of Hard Arkansas
What is an Arkansas Stone
Typical Applications:-Jeweler’s stones-Watchmaker’s stones-Chamfering & radiusing-Dimensioning curves-Maintain cutting tools-Small space hand honing
“Arkansas stone” is a natural stone called Novaculite that is quarried in, you guessed it,the Arkansas area. We carry the highest quality premium grades of Hard and SoftArkansas stone. This natural stone color varies from transparent, white, and black.
Rapp Industrial Sales 724 789-7853 [email protected]
Arkansas Stone
6
Small Jewelers’ and Penknife Precision Benchstones
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
1/4 x 1 x 3 Soft Arkansas Extra Fine SAB-13 SB13 00438 ¾ lbsHard Arkansas Ultra Fine HAB-13 HB13 00321
1/4 x 1 x 4 Soft Arkansas Extra Fine SAB-14 SB14 00439 1 lbsHard Arkansas Ultra Fine HAB-14 HB14 003221/2 x 2 x 4 Hard Arkansas Ultra Fine *HAB-24 HB24 00323 2 lbs
Arkansas Bench Stones
All Arkansas Stone sizes are approximate due to the natural stone quarry process
Sharpening Stones
Typical Applications:Cutlery & kitchen knives-General tools & knives-
Wood lathe cutters-Jewelers stones-Planes & chisels-
Woodworking tools-
Large Arkansas Bench Stones
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
1 x 2 x 4 Soft Arkansas Extra Fine SAB-4 SB4 00435 3 lbsHard Arkansas Ultra Fine HAB-4 HB4 003181/2 x 2 x 6 Hard Arkansas Ultra Fine **HAB-62 n/a 04700 2¾ lbs
1 x 2 x 6Soft Arkansas Extra Fine SAB-6 SB6 00436
5¾ lbsHard Arkansas Ultra Fine HAB-6 HB6 00319Hard Arkansas Ultra Fine **HAM-6 HM6 00341
1/2 x 2 x 8 Hard Arkansas Ultra Fine **HAB-82 n/a 04701 3¼ lbs
1 x 2 x 8Soft Arkansas Extra Fine SAB-8 SB8 00437
6¼ lbsHard Arkansas Ultra Fine HAB-8 HB8 00320Hard Arkansas Ultra Fine **HAM-8 HM8 00443
all are available in a premium wood box upon request / **comes st andard in a premium wood box
Do you need Soft or Hard Arkansas?
Creates the ultimate, razor sharp, near mirror finishand long lasting edge. This stone does not requireflattening and has the longest stone life. For useon a final edge after a fine grit oil stone or softarkansas has shaped the edge.
More economical type of arkansas stone that pro-duces a very fine edge only surpassed by hardarkansas. Softer stone allows you to create a veryfine edge on your blade. Best results if used aftera standard fine grit oil stone like on page 3.
Benefits of Soft Arkansas Benefits of Hard Arkansas
Rapp Industrial Sales 724 789-7853 [email protected]
Cutlery & Kithchen
7
Sharpening Stones
Giant CutleryBench Stones
These giant stones allow long sweepingstrokes like the large systems but in theconvenience of one stone. They arecombination grit, fine and coarse forversatility. Silicon Carbide is best forsharpening quickly and aluminum oxideis best for longer lasting cutting edges.
Package Qty Part # Norton # Size Abrasive Type Grit UPC #730006
Standard = 1IM-2 IM2 1 x 2½ x 11½ Aluminum Oxide Fine
&Coarse
00358JUM-3 JUM3 Silicon Carbide 00371JUM-4 JUM4 1½ x 2½ x 12 Silicon Carbide 00372
JUM-3 &
JUM-4
IM-2
Cutlery & Kitchen Sharpeners
Sharpening SystemsMulti-Oilstone Units
These self contained systems are the choice ofprofessionals. These sharpening systems use aself contained oil bath system to keep the stoneslubricated and in top condition. These are great forprofessional chefs and butchers or even the hobbiestor cook at home. We have the system for any sizeknife, large or small. The S&S system is proudly made inthe USA. We also offer the very popular and industry standard, Norton line systems.
IM-313
System Replacement Stones
System Size Grit Part # Abrasive Type UPC #730006
S&S-3in1 &
IM-313½ X 2½ X 11½
Ultra Fine HR-115 Hard Arkansas 00351Fine IM-9 Aluminum Oxide 00359
Medium JM-6Silicon Carbide
00365Coarse JM-3 00364
Replacement stones for other systems also available. Just call and we’ll help you.
Size Part # Manufacture UPC #730006
11½” Stones S&S-3in1 Sticks & Stones 0036911½” Stones IM-313
Norton00363
8” Stones IM-200 008046” Stones IM-100 00362
IM-100IM-200
S&S-3in1
Rapp Industrial Sales 724 789-7853 [email protected]
Axe Stones & misc.
Sharpening Stones
Coarse
Fine
CoarseFine
large Axe StoneThis combination fine and coarse grit axe stone is also agreat tool for sharpening an axe or hatchet. The largersize and finger grooves make it the safest choice tosharpen any tool. Oil-Filled for lubrication.
Size Part # Norton # UPC #730006
3” Dia. x 5/8” thick SJT-3 JT3 00465
Small Axe StoneThis combination fine and coarse grit axe stone is a greattool for sharpening an axe or hatchet. The smaller sizemakes it easy to take with you. Oil-Filled for lubrication.
Axe Stones & Misc.
8Gouge Sharpening Stone
A gouge stone is used for sharpening tools of the artist, craftsman, andwood worker. Designed for curved edge tools like chisels. Oil-Filled.
Size Part # Norton # UPC #730006
4” Dia. x 1½” thick SB-74 JB74 00451
Size Grit Part # Norton # UPC #730006
(⅜-½) x (1”-2”) x 6 Fine AFS-76 FS76 00133
Finishing SticksThese finishing sticks are color coded for instantindentification of grit size. Used for finishing,sanding and deburring. Sold as individual toolswith one belt installed. Replacement belts soldseparately in packs of 10. Made in the USA.
1/4” Belt x 6” Stick
Grit StickColor
Tool UPC #
BeltsUPC #
40 Brown 02500 0251080 Gray 02501 02511
120 Red 02502 02512240 Blue 02503 02513320 Green 02504 02514400 Yellow 02505 02515600 Black 02506 02516
1/2” Belt x 8” Stick
Grit StickColor
Tool UPC #
BeltsUPC #
40 Brown 02600 0261080 Gray 02601 02611
120 Red 02602 02612240 Blue 02603 02613320 Green 02604 02614400 Yellow 02605 02615600 Black 02606 02616
3/4” Belt x 10” Stick
Grit StickColor
Tool UPC #
BeltsUPC #
40 Brown 02700 0271080 Gray 02701 02711
120 Red 02702 02712240 Blue 02703 02713320 Green 02704 02714400 Yellow 02705 02715600 Black 02706 02716
Rapp Industrial Sales 724 789-7853 [email protected]
Square Files
9
Square File Stones
Tool Room & Die Finishing Stones
Typical Applications:-Dimensioning keyways-Deburring-Small space hand honing-Router bit sharpening
Hard Arkansas - Natural•Creates the ultimate razorsharp edge & near mirror finish.
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
**HardArkansas isUltra Finedoes not
have a gritrating
1/4 Sq . x 4
Fine FSF-14 FJF14 00269
2 ozSilicon Carbide Medium MSF-14 MJF14 00384
Coarse CSF-14 CJF14 00485Fine AFF-14 FF14 00081
Aluminum Oxide Medium AMF-14 MF14 00148Coarse ACF-14 CF14 00011
3/8 Sq. x 4
Fine FSF-34 FJF34 00272
4 ozSilicon Carbide Medium MSF-34 MJF34 00387
Coarse CSF-34 CJF34 00223Fine AFF-34 FF34 00084
Aluminum Oxide Medium AMF-34 MF34 00151Coarse ACF-34 CF34 00014
1/2 Sq. x 4
Fine FSF-44 FJF44 00274
8 ozSilicon Carbide Medium MSF-44 MJF44 00389
Coarse CSF-44 CJF44 00225Fine AFF-44 FF44 00086
Aluminum Oxide Medium AMF-44 MF44 00153Coarse ACF-44 CF44 00016
1/2 Sq. x 6
Fine FSF-46 FJF46 00275
12 ozSilicon Carbide Medium MSF-46 MJF46 00390
Coarse CSF-46 CJF46 00226Fine AFF-46 FF46 00087
Aluminum Oxide Medium AMF-46 MF46 00154Coarse ACF-46 CF46 00017
5/8 Sq. x 6
Fine FSF-56 FJF56 00276
1¼ lbsSilicon Carbide Medium MSF-56 MJF56 00391
Coarse CSF-56 CJF56 00227Fine AFF-56 FF56 00088
Aluminum Oxide Medium AMF-56 MF56 00155Coarse ACF-56 CF56 00018
3/4 Sq. x 6
Fine FSF-66 FJF66 00277
1½ lbsSilicon Carbide Medium MSF-66 MJF66 00392
Coarse CSF-66 CJF66 00228Fine AFF-66 FF66 00089
Aluminum Oxide Medium AMF-66 MF66 00156Coarse ACF-66 CF66 00019
1” Sq. x 6
Fine FSF-76 FJF76 00278
3 lbsSilicon Carbide Medium MSF-76 MJF76 00393
Coarse CSF-76 CJF76 00229Fine AFF-76 FF76 00090
Aluminum Oxide Medium AMF-76 MF76 00157Coarse ACF-76 CF76 00020
1/4 Sq. x 3-3½Hard Arkansas **Ultra Fine
HAF-13 HF13 00326 2 oz3/8 Sq. x 3-3½ HAF-33 HF33 00327 5 oz1/2 Sq. x 3-3½ HAF-43 HF43 00328 7 oz
Do you need Aluminum Oxide, Silicon Carbide or Hard Arkansas?
S&S-3in1
S&S-3in1
Rapp Industrial Sales 724 789-7853 [email protected]
Triangle Files
10
Triangle File Stones
Typical Applications:Cleaning tap threads-
Deburring-Small space hand honing-Chamfering and radiusing-
Tool Room & Die Finishing Stones
Do you need Aluminum Oxide, Silicon Carbide or Hard Arkansas?
Hard Arkansas - Natural•Creates the ultimate razorsharp edge & near mirror finish.
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
**HardArkansas isUltra Finedoes not
have a gritrating
1/4 Tri. x 4
Silicon Carbide Fine FSF-114 FJF114 00279
2 ozMedium MSF-114 MJF114 00394
Aluminum OxideFine AFF-114 FF114 00091
Medium AMF-114 MF114 00158Coarse ACF-114 CF114 00021
3/8 Tri. x 4
Silicon Carbide Fine FSF-134 FJF134 00281
3 ozMedium MSF-134 MJF134 00395
Aluminum OxideFine AFF-134 FF134 00092
Medium AMF-134 MF134 00160Coarse ACF-134 CF134 00022
1/2 Tri. x 4
Silicon CarbideFine FSF-144 FJF144 00283
4 oz
Medium MSF-144 MJF144 00396Coarse CSF-144 CJF144 00233
Aluminum OxideFine AFF-144 FF144 00094
Medium AMF-144 MF144 00162Coarse ACF-144 CF144 00024
1/2 Tri. x 6 Aluminum OxideFine AFF-146 FF146 00095
6 ozMedium AMF-146 MF146 00163Coarse ACF-146 CF146 00025
5/8 Tri. x 6 Aluminum Oxide Fine AFF-156 FF156 00096 9 ozMedium AMF-156 MF156 00164
3/4 Tri. x 6 Aluminum Oxide Fine AFF-166 FF166 00097 11 ozMedium AMF-166 MF166 00165
1” Tri. x 6 Aluminum Oxide Fine AFF-176 FF176 00098 14 ozMedium AMF-176 MF176 001661/4 Tri. x 3-3½
Hard Arkansas ** Ultra FineHAF-113 HF113 00329 2 oz
3/8 Tri. x 3-3½ HAF-133 HF133 00330 3 oz1/2 Tri. x 3-3½ HAF-143 HF143 00331 4 oz
Don’t forget sharpening oil to enhance the stone’s performance (bottom pg3)
S&S-3in1
S&S-3in1
Rapp Industrial Sales 724 789-7853 [email protected]
Round Files
11
Tool Room & Die Finishing StonesRound File Stones
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
1/4 Rnd x 4
Silicon Carbide Fine FSF-214 FJF214 00287
2 ozMedium MSF-214 MJF214 00399
Aluminum OxideFine AFF-214 FF214 00099
Medium AMF-214 MF214 00167Coarse ACF-214 CF214 00029
3/8 Rnd x 4
Silicon CarbideFine FSF-234 FJF234 00288
4 oz
Medium MSF-234 MJF234 00401Coarse CSF-234 CJF234 00240
Aluminum OxideFine AFF-234 FF234 00100
Medium AMF-234 MF234 00168Coarse ACF-234 CF234 00030
1/2 Rnd x 4
Silicon Carbide Fine FSF-244 FJF244 00290
6 ozMedium MSF-244 MJF244 00403
Aluminum OxideFine AFF-244 FF244 00102
Medium AMF-244 MF244 00170Coarse ACF-244 CF244 00032
3/8 Rnd x 6 Aluminum Oxide Fine AFF-236 FF236 00101 8 ozMedium AMF-236 MF236 00169
1/2 Rnd x 6Silicon Carbide Fine FSF-246 FJF246 00291
10 ozMedium MSF-246 MJF246 00404
Aluminum Oxide Fine AFF-246 FF246 00103Medium AMF-246 MF246 00171
3/4 Rnd x 6 Aluminum OxideFine AFF-266 FF266 00105
1¼ lbsMedium AMF-266 MF266 00173Coarse ACF-266 CF266 00035
1” Rnd x 6 Aluminum Oxide Fine AFF-276 FF276 00106 2¼ lbsMedium AMF-276 MF276 00174
Typical Applications:-Dimensioning curves-Deburring-Small space hand honing-Chamfering and radiusing
Don’t forget sharpening oil to enhance the stone’s performance (bottom pg3)
Do you need Aluminum Oxide, or Silicon Carbide?
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Rapp Industrial Sales 724 789-7853 [email protected]
Don’t forget sharpening oil to enhance the stone’s performance (bottom pg3)
Tool Room & Die Finishing StonesHalf Round File Stones
12
Typical Applications:Dimensioning curves-
Deburring-Small space hand honing-Chamfering and radiusing-
Aren’t finding what your looking for? Call us and let us do the work for you.
Half Round Files
Do you need Aluminum Oxide, or Silicon Carbide?
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
1/4 H.R. x 4 Aluminum OxideFine AFF-314 FF314 00107
2 ozMedium AMF-314 MF314 00175Coarse ACF-314 CF314 00037
3/8 H.R. x 4
Silicon CarbideFine FSF-334 FJF334 00296
2 oz
Medium MSF-334 MJF334 00410Coarse CSF-334 CJF344 00249
Aluminum OxideFine AFF-334 FF334 00109
Medium AMF-334 MF334 00177Coarse ACF-334 CF334 00039
1/2 H.R. x 4
Silicon CarbideFine FSF-344 FJF344 00298
3 oz
Medium MSF-344 MJF344 00412Coarse CSF-344 CJF344 00251
Aluminum OxideFine AFF-344 FF344 00111
Medium AMF-344 MF344 00178Coarse ACF-344 CF344 00041
1/2 H.R. x 6Silicon Carbide Fine FSF-346 FJF346 00299
5 ozMedium MSF-346 MJF346 00413
Aluminum Oxide Fine AFF-346 FF346 00112Medium AMF-346 MF346 00179
3/4 H.R. x 6 Aluminum Oxide Fine AFF-366 FF366 00114 12 ozMedium AMF-366 MF366 00181
1” H.R. x 6 Aluminum Oxide Fine AFF-376 FF376 00115 1¾ lbsMedium AMF-376 MF376 00182
Rapp Industrial Sales 724 789-7853 [email protected]
Slip Stones
13
Round Edge Slip Stones
Size Abrasive Type Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
**HardArkansas isUltra Finedoes not
have a gritrating
(1/8-3/8) x 1½ x 4 Hard Arkansas Ultra Fine HAS-14 HS14 00347 10 oz(1/8-3/8) x 2 x 3 Hard Arkansas Ultra Fine HAS-3 HS3 00344 12 oz
(3/16-1/2) x 2 x 4 Hard Arkansas Ultra Fine HAS-4 HS4 00345 1¾ lbs(3/16-1/2) x 2 x 4 Soft Arkansas Extra Fine SAS-4 SS4 00445 1 lb
The above Arkansas stone sizes are approximate due to the natural stone quarry process(1/8-3/16) x 1 x 4 Silicon Carbide Fine FSS-10 FJS10 00306 8 oz
(3/16-7/16) x 1 x 4Silicon Carbide Fine FSS-14 FJS14 00307
10 ozAluminum Oxide Fine AFS-14 FS14 00128Medium AMS-14 MS14 00196
(1/16-1/4) x 1¾ x 4½
Silicon CarbideFine FSS-24 FJS24 00308
12 oz
Medium MSS-24 MJS24 00423Coarse CSS-24 CJS 00258
Aluminum OxideFine AFS-24 FS24 00130
Medium AMS-24 MS24 00199Coarse ACS-24 CS24 00059
(1/8-3/8) x 1¾ x 4½ Aluminum OxideFine AFS-34 FS34 00131
8 ozMedium AMS-34 MS34 00201Coarse ACS-34 CS34 00060
(3/16-1/2) x 1¾ x 4½
Silicon CarbideFine FSS-44 FJS44 00311
1¼ lbs
Medium MSS-44 MJS44 00424Coarse CSS-44 CJS44 00259
Aluminum OxideFine AFS-44 FS44 00132
Medium AMS-44 MS44 00203Coarse ACS-44 CS44 00061
(5/16-5/8) x 2⅛ x 4½ Silicon Carbide Medium MSS-54 MJS54 00426 1⅞ lbs
(3/32-5/16) x 1 x 5 Aluminum Oxide Fine AFS-15 FS15 00129 12 ozMedium AMS-15 MS15 00197
(3/8-3/4) x 2¼ x 6 Silicon Carbide Fine FSS-66 FJS66 00313 2⅞ lbsMedium MSS-66 MJS66 00427
Typical Applications:-Dimensioning curves-Flat and round honing-Honing Bead planers-Chamfering and radiusing-Tool and die applications
Round Edge Slip Stones
Tool Room & Die Finishing Stones
Hard Arkansas - Natural•Creates the ultimate razorsharp edge & near mirror finish.
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Silicon Carbide - Oil filled•Fast cutting and loadresistant for mild tolerances.
Do you need Aluminum Oxide, Silicon Carbide or Hard Arkansas?
Rapp Industrial Sales 724 789-7853 [email protected]
14
Typical Applications:Silversmiths’ Stones-
Deburring-Small space hand honing-Chamfering and radiusing-
Tool Room & Die Finishing StonesSpecialty shape & Silversmiths’ stones
Specialty Shape Stones
Do you need Aluminum Oxide, or Hard Arkansas?
Hard Arkansas - Natural•Creates the ultimate razorsharp edge & near mirror finish.
Aluminum Oxide - Oil filled•Smooth Cutting for close tol-erances & a long lasting edge.
Shape Size Grit Size Part # Norton # UPC #730006
Weight per std pkg
PackageQty
Minimum = 1-4
Standard= 5
Grit Size
Fine = 320 Grit
Medium = 220 Grit
Coarse = 120 Grit
1/16 x 1/2 x 4Flat Rectangle
Fine AFF-444 FF444 00120 2 ozMedium AMF-444 MF444 00187(1/8-1/4) x (1/4-1/2) x 4
Flat Double Taper Fine AFF-474 FF474 001233 oz(1/8-1/4) x (1/4-1/2) x 4
Oval Double Taper Medium AMF-464 MF464 00189(1/16-1/4) x (1/4-3/8) x 4
Oval Double Taper Fine AFF-424 FF424 00117 2 oz
(1/4-1/2) x 4Tapered Round
Fine AFF-644 FF644 00125 4 ozMedium AMF-644 MF644 00192(1/4-1/2) x 4
Tapered Triangle Medium AMF-544 MF544 001913 oz3/16 x 9/16 x 4
DiamondFine AFT-134 FT134 00141
Medium AMT-134 MT-134 002125/16 Base x 3
Round Taper to PointFine AFF-723 FF723 00126 2 ozMedium AMF-723 MF723 00193
1/8 Back x 1 x 4Knife Shape
Fine AFF-724 FF724 001274 ozMedium AMF-724 MF724 00194
Coarse ACF-724 CF724 000573/16 Back x 7/8 x 2-1/4 Medium AMS-42 MS42 00202 2 oz
3/16 x 3/4 x 3-1/2 Fine AFT-123 FT123 00137 4 oz5/16 x 1 x 4-1/2Reamer Shape
Fine AFT-124 FT124 00138 11 ozMedium AMT-124 MT124 002093/16 x 1 x 5
Reamer ShapeFine AFT-125 FT125 00139 8 ozMedium AMT-125 MT125 00210
1/4 x 1 x 6 Medium AMT-126 MT126 00211 3 oz4” Auger Bit Shape Fine AFT-10 FT10 00134 3 oz
Shape Size Part # Norton # UPC #730006
Weight per std pkg
1/4 Rnd x 3-3½ HAF-813 HF813 00332 3 oz3/16 x 1/2 x 3-3½ HAF-823 HF823 00333 3 oz3/16 x 1/2 x 3-3½ HAF-833 HF833 00334 3 oz1/4 x 1/2 x 3-3½ HAF-843 HF843 00335 3 oz1/4 x 1/2 x 3-3½ HAF-853 HF853 00336 3 oz
1/4 to Point x 3-3½ HAF-863 HF863 00337 2 oz1/4 back x 1 x 3-4 HAF-873 HF873 00338 4 oz
Package QtyMinimum
= 1-4Standard
= 5
HardArkansasUltra Fine
Rapp Industrial Sales 724 789-7853 [email protected]
Polishing Stones
15
How to Choose & Order Stone
Polishing & Finishing Stones
Polishing/Finishing Stones Finish is everything. Don’t let inferior product ruin your finish. Our stones aremade in the USA with high quality abrasive. We expect the best, so should you.
Finish is Everything
These are only common sizes, other sizes areavailable upon request and all are non- stock,made per order.
1/4 x 1 x 63/8 x 3/8 x 61/2 x 1/2 x 61/2 x 1 x 63/4 x 3/4 x 61 x 1 x 61/4” Round x 63/8” Round x 61/2” Round x 6
Common Sizes:1/16 x 1/4 x 61/16 x 1/2 x 61/8 x 1/4 x 61/8 x 1/2 x 61/4 x 1/4 x 61/4 x 1/2 x 63/16 x 1/2 x 61/4 x 3/4 x 61/8 x 1 x 6
It’s as easy as 1, 2, 3Choose the stone size:
Example: 1/4 x 1/2 x 6
Choose the type of stone:Example: Mold Maker or M
Choose grit size:Example: 320
Example Stone Order: 1/4 x 1/2 x 6 M-320
Quantity1-11 Each1-4 Dozen5-9 Dozen10+ Dozen
Typically order in dozens but not limited to.Big Quantity Discounts:
DiscountNet
10% Off Net15% Off Net30% Off Net
We offer many types and grits formany different applications too numerous to be named here.
-====
Don’t see what youneed? Just call us!
You’reDone:
Rapp Industrial Sales 724 789-7853 [email protected]
Polishing Stones
16
Common grits: 100, 150, 220, 320, 400, 500, 600
Polishing & Finishing Stones
Diemaker - “D”
Polishing Stone Types
These are our most popular finishers. They are medium hard bond, which provides a balanced breakdown offast cutting and ability to hold shape. Made of aluminum oxide. Brown in color.
EDM - “EDM”Specifically designed for removing EDM scale. These hard, cool cutting stones hold shape extremely well andcut fast. Made of premium aluminum oxide. Orange in color.
General Polishing - “WT”These treated stones are a medium bond, and wax treated for load resistance for general polishing. Great stonefor many applications. Made of premium white aluminum oxide.
Hard Polishing - “OT”These treated stones are hard bond, lubricated (load resistant), and hold shape for detail work like ribs and slots.Made of premium white aluminum oxide. Off-white in color.
Ruby - “R”These stones are soft bond for fast stock removal and cool cutting. They are very aggressive and non-loadingwhich makes them great for softer metals. Made of premium aluminum oxide. Light pink in color.
Mold Maker - “M”These stones are medium bond, fast cutting, and non-loading for an even breakdown which conforms to the shapeof work surface. Made of silicon carbide. Black or green in color.
Hard Mold Maker - “HM”These stones are a hard bond which holds shape and lasts longer than the standard moldmaker, yet still fastcutting for general polishing. Made of silicon carbide. Black or green in color.
Resin Bond - “B”These stones are very hard for fine detail work and producing a fine finish while maintaining their shape longerthan most standard vitrified stones. Made of resin bond aluminum oxide. Brown in color.
Rough Out - “RO”These medium hardness stones are very aggressive, used for heavy stock removal or removing deep groovesand scratches without loading. Made of aluminum oxide. Brown or blue in color.
Super Fine - “SF”These stones are soft bond and conform to the shape of the work surface for superfinishing applications. Softhardness keeps them from loading. Made of calcined alumina. White in color.
Common grits: 100, 120, 150, 180, 220, 320, 400, 600
Common grits: 100, 150, 220, 320, 400, 500, 600, 800
Common grits: 100, 150, 220, 320, 400, 500, 600
Common grits: 46, 60, 80, 100, 150, 220
Common grits: 150, 220, 320, 400, 500, 600
Common grits: 150, 220, 320, 400, 500, 600
Common grits: 120, 180, 220, 320, 400
Common grits: 80, 100, 120, 150
Common grits: Only available in 1200
Rapp Industrial Sales 724 789-7853 [email protected]
Metal Polishing
17
Metal Polishing & Cleaning
Available in Square, Round, Triangle, Rectangle and Bias-cut sticks. Hardness isavailable in Soft, Medium and Hard from 54 to 220 Grit. All are custom mfg.
RubberAbrasive
Cotton FiberAbrasive
Flexible rubber sticks are excellenthand tools for cleaningelectric motors and polishing metalsurfaces, breaking edges, smoothingaway high spots, removing rust, heat marks, tarnish and stains.
1/4 x 1/4 x 43/8 x 3/8 x 41/2 x 1/2 x 41/2 x 1/2 x 6
Square
Common Sizes:
3/8” Triangle x 41/2” Triangle x 43/8” Round x 41/2” Round x 4
Triangle &Round
1/4 x 1 x 4 1/2 x 3/4 x 41/8 x 1 x 53/8 x 1/2 x 5
3/8 x 3/4 x 55/8 x 1 x 51 x 2 x 51/4 x 1/2 x 6
1/2 x 3/4 x 63/8 x 1 x 61/2 x 1 x 61 x 2 x 6
Rectangle
other sizes available
Rubber & Cotton Fiber sticks
Available in Square and Round sticks. Hardness is available in Soft, Medium & Hard from 54 to 320 Grit.
Cotton fiber sticks are cool cutting andexcellent hand tools for cleaning and polishingmetal surfaces, breaking edges, smoothing awayhigh spots, removing rust, heat marks, tarnish and stains.
Stock Cotton Fiber Sticks
Size Hardness Grit Abrasive Specification UPC #730006
1/2 x 1/2 x 6 Soft120 A120-GFX 06807180 A180-GFX 06806320 A320-GFX 06811
other sizes available
Rapp Industrial Sales 724 789-7853 [email protected]
18
Machine Tool Stones
Boat stones are used for breaking seams and edges ondies, machined parts or magnetic chucks. The shapemakes it easy to hold and use. Available in a varietyof specifications. A few stock items listed below.
Burr Removers & Boat Stones
Machine Tool Stones
For removing burrs on magneticchucks or scouring a flat surface.
Made in USA
Blanchard Burr Busters
“Gold”
“Green”
Norton Burr RemoverS&S Bu
rr Breaker
S&S Burr Breaker is economically priced and made in the USA by Sticks & Stones. We also carry the popular Pacific Blanchard and the Norton Burr Remover.
boat Stones
Size Part # Manufacture Abrasive Type Metal Use UPC #730006
1⅝ x 4 x 4 S&S Burr BreakerSticks & Stones Silicon Carbide All
030301⅝ x 4 x 6 S&S Burr Breaker 6 03029
1-1/2 x 4⅜ x 6Burr Buster - Gold
PacificAluminum Oxide Ferrous 00524
Burr Buster - Green Silicon Carbide Non Ferrous 005211⅝ x 4¼ x 7¼ Burr Remover Norton Silicon Carbide All 00540
Size Abrasive Specification
AbrasiveType
UPC #730006
1½ X 2½ X 9
38A60-IVBE AluminumOxide
00523Dark Pink 46 03032
C80-HV Silicon Carbide
03031C36-JV 03009
Size Part # Norton # UPC #730006
4” Dia. x 1½” thick SB-74 JB74 00451
Machine Knife StoneThis combination grit fine and coarse stone is used forsharpening paper, cloth, veneer knives while on machine.The finger groove provides protection of fingers and thereis no need to remove knives from machine.
Coarse
Fine
Burr Removers
Rapp Industrial Sales 724 789-7853 [email protected]
Dressing Stones
19
Dressing Stones
Typical Applications:- For dressing, cleaning andtruing vitrified bond, resinbond, diamond and CBNgrinding wheels. Dressingwheels keeps them workingefficiently and safely.
Dressing sticks & Stones
Dressing sticks for Diamond and CBN Wheels
Size Sticks & StonesSpecification
NortonSpecification
UPC #730006
1/2 x 1/2 x 6 ALW150-IV 38A150-IVBE 00525ALW220-IV 38A220-IVBE 00527
3/4 x 3/4 x 4 ALW150-IV 38A150-IVBE 00526ALW220-IV 38A220-IVBE 00528
1 x 1 x 6 ALW150-IV 38A150-IVBE 00529ALW220-IV 38A220-IVBE 00530
TIP: Choose a grit size around the same grit size or finer than the abrasive wheel.
Dressing sticks for Vitrified Wheels
Size StonesSpecification
Part #(If applicable)
UPC #730006
1/2 x 1/2 x 6
C24-RV
n/a 004871/2” Round x 6 ST-246 00470
1 x 1 x 6 n/a 004891 x 1 x 8 n/a 004901 x 2 x 6 SHR-211 005021 x 2 x 8 SHR-222 005072 x 2 x 8 SHR-225 005081 x 1 x 6 C46-RV n/a 004921 x 1 x 8 n/a 00493
We can make a variety of different specs, grits and sizes to dial in exactly what you need.
Size Part # Norton # UPC #730006
3/16 x 1/2 x 3 B-1 Norbide Stick 00538
Boron CarbideDressing Stick
These hot pressed boron carbide sticksare for truing and dressing medium orsoft vitrified grinding wheels. BoronCarbide is by far the hardest dressingstick you can buy.
B-1
Rapp Industrial Sales 724 789-7853 [email protected]
Rubbing Bricks
Rubbing Bricks & Rubs
Rubbing Bricks & Floor Rubs
Griddle Bricks
Rubbing Brick with Handle
Part # Industry # Norton # Size Grit UPC #730006
Weight per Stone
SHR-250 HR-250 235 1½ X 3½ X 8 Extra Coarse
00516 3½ lbsSHR-252 HR-252 BFH6 1 X 3 X 6 00517 1½ lbs
Hand rubs with plastic handles make quickwork of removing mold marks, rubbing downgreen concrete and are ideal for floor, over-head and wall work. Concrete workers andmasons appreciate the handle.
Rubbing Bricks
For cleaning and scouring griddles andcooking plates. Faster, easier, cleanerand less expensive than other methods.Round edges for a comfortable grip.
20
Part # Norton # Size Grit UPC #730006
Weight per Stone
AIT-4 IT4 2 x 3 x 4½ Medium 00142 1¾ lbs
These rubbing bricks are available in 3 types: PLAIN FACE - for dressing grinding wheels andcleaning and scouring castings.WAFFLE FACE - can be used the same as plainface but has a more aggresive face pattern. FLUTED FACE - used in concrete applications forrubbing down green concrete and removingmold marks.
Size Face Type Part # Industry # UPC #730006
Weight per Stone
1 x 2 x 4 Plain SHR-201 HR-201 00498 ¾ lb2 x 2 x 4 Plain SHR-202 HR-202 00499 1⅓ lbs
1 x 2 x 6Plain SHR-211 HR-211 00502
1 lbWaffle SHR-211W n/a 00497
2 x 2 x 6Plain SHR-213 HR-213 00503 2¼ lbsFluted SHR-241 HR-241 00512 2 lbs
1 x 2 x 8Plain SHR-222 HR-222 00507
1¾ lbsWaffle SHR-222W n/a 00496
2 x 2 x 8Plain SHR-225 HR-225 00508 2¾ lbsFluted SHR-242 HR-242 00513 2½ lbs
FLUTEDWAFFLE
PLAIN
Rapp Industrial Sales 724 789-7853 [email protected]
Large Abrasive Files
21
Large Abrasive Files
Abrasive Files
Flat Plain Core Files
Flat core files are a resin bond silicon carbide abrasivein a very coarse grit to aggressively file sand cores andmetal. Reinforcement of fiberglass in the center preventsbreakage. They are custom made in any size desired.
1/8 x 1/2 x 81/8 x 1 x 91/8 x 1 x 12
1/4 x 1 x 91/4 x 1 x 121/4 x 2 x 12
1/2 x 1 x 91/2 x 1 x 121/2 x 2 x 12
Standard Sizes:
OverallLength
AbrasiveLength Part # UPC #
73000611” 8” #26 0237113” 10” #27 02372
Half Round FoundryCore Files
The versatile, tapered half-roundshape allows them to be used as flator round files. They are extremelycoarse and do not dull like metal files,quickly shaping sand castings.
Scythe Stones
These stones produce a fast cuttingedge quickly and are used for scythes,sickles and mowing machines.
Part # Norton # Size Abrasive Type Grit UPC #730006
Weight per std pkg
ATD-1 TD1 3/4 X 1¼ X 10 Aluminum Oxide Coarse 00214 8 lbsTS-3 TJ3 Silicon Carbide 00481
Package Qty
Minimum = 1Standard = 10
ATD-1
TS-3
Rapp Industrial Sales 724 789-7853 [email protected]
22
Utility Files
These silicon carbide files are long andhave a wedge shape for quick sharp-ening of edges like garden tool edgesand will not dull like metal files.
Part # Norton # OverallLength Grit UPC #
730006Weight per
std pkgSD-2 JD2 14” Coarse 00454 12½ lbsSD-3 JD3 14” Coarse/ Fine 00455
Package Qty
Minimum = 1Standard = 10
Tradesmen’ StoneFor sharpening of knives used in trimmingleather, rubber, plastic and carpet. Thecombination grit allows for sharpeningthe dullest blade to the finest edge.
Part # Norton # OverallLength Grit UPC #
730006Weight per
std pkgST-930 JT930 15” Coarse/ Fine 00475 9 lbs
Package QtyMinimum = 1
Standard = 10
Large Abrasive Files
General Purpose File
This green silicon carbide file is theright size and shape for your homeand garden tools. Flat and curvededges make it very versatile.
Part # Norton # Size Grit UPC #730006
Weight per std pkg
ST-911 JT911 1/2 x 1⅜ x 9½ Medium 00473 5 lbs
Package QtyMinimum = 1
Standard = 10
Large Abrasive Files
Abrasive Files
Home & GardenSharpener File
This file is flat on one side, convex onthe other, for versatility and use on allgarden tools, such as mower blades,tree shears, and even axes.
Part # Norton # Overall Length Grit UPC #730006
Weight per std pkg
SJT-8 JT8 10½” Medium 00466 2½ lbs
Package QtyMinimum = 1Standard = 5
Rapp Industrial Sales 724 789-7853 [email protected]
23
Jointer Stones
We custom manufacture right here in the USA,jointer and pattern stones to strict tolerancesfor all applications. You can pick your exactspecification of stone or we can recommendone for you. We can make almost any size,
abrasive type, grit size and hardness you need. Made to order just for you in large or smallquantities. Standard lead times are an industry leading 1-3 weeks on most orders. We are oneof the few companies that can make stones as fine as 1200 grit and we carry the widest selectionof abrasive specifications to keep up to date with current machines and new technology.
Jointer Stones
Custom Made for You
Abrasive Types:
Jointer Stone 1/4 x 3/4 x 45/16 x 3/4 x 43/8 x 3/4 x 41/2 x 3/4 x 43/4 x 3/4 x 43/4 x 2 x 4
Pattern Stone3/4 x 2 x 6 3/4 x 2 x 8.590 x 2 x 6.590 x 2¼ x 6.590 x 2 x 8.590 x 2¼ x 8
Common Sizes:
Call or E-mail us and we’ll help you with how to order
We can also make large sizes such as:3/4 x 3 x 8 OR 3/4 x 4 x 6
or GO BIG WITH THE NEW 3/4 x 3 x 13
Jointer Stone Applications:Premium Aluminum Oxide
White: Premium grain, cool cuttingOrange: Premium grain more durable bondBlue: Premium grain, longest life and still
cuts cool and fast
Pattern Stone Applications: Silicon CarbideCuts fast and cool
Green: Premium Silicon CarbideBlack: Standard Silicon Carbide
Typical Applications:-Quickly restore, sharpen, andremove deposits caused from thewood cutting process and maintainthe cutting edges of mechanical jointingdevices, automatic planers, high speedsteel knives and carbide knives.
Custom Jointer & Pattern Stones
Rapp Industrial Sales 724 789-7853 [email protected]
Jointer Stones
24
Jointer Stones
Typical Applications:-Quickly restore, sharpen, and removedeposits caused from the wood cutting
process and maintain the cuttingedges of mechanical jointing devices, automatic planers,
and carbide knives.
Stock Jointers
Size Abrasive Type Part # Norton # UPC #730006
Weight per std pkg
1/4 x 3/4 x 4 Silicon Carbide SE-54 JE-54 00456 1 lbAluminum Oxide AE-54 IE-54 00071
5/16 x 3/4 x 4 Silicon Carbide SE-64 JE-64 00457 1 lbAluminum Oxide AE-64 IE-64 00072
3/8 x 3/4 x 4 Silicon Carbide SE-74 JE-74 00458 1½ lbsAluminum Oxide AE-74 IE-74 00073
1/2 x 3/4 x 4 Silicon Carbide SE-84 JE-84 00459 1½ lbsAluminum Oxide AE-84 IE-84 00074
3/4 x 3/4 x 4 Silicon Carbide SE-104 JE-104 00460 2⅛ lbsAluminum Oxide AE-104 IE-104 00075
Package QtyBroken = 1-4Minimum = 5
Standard = 10
Stock Jointer Stones
Pocket Stones, Pocket Jointers & Hand Hones
Package Qty Size Abrasive Type Grit Part # UPC #730006
Weight per std pkg
Minimum = 1Standard = 50
3/8 x 3/4 x 4 Premium Green Silicon Carbide
220 GSHH-13 0031550 =
7½ lbs320 GSHH-14 00316400 GSHH-15 00317
3/8 x 1 x 4 Silicon Carbide 320 C320-K8V32 03014 n/aMin=1 Std=5 3/8 x 7/8 x 3 Silicon Carbide Medium SJP-13 00463 ¾ lbs
Minimum = 1Standard = 5 1/2 x 3/4 x 3½
Silicon CarbideFine FST-63 00314
8 ozMedium MST-63 00428Coarse CST-63 00262
Set of F,M,C-63’s F, M, C S-63 00434 1½ lbs
S-63 SET GSHHSERIES
Used for hand honing,sharpening and dressingcarbide blades and edges.
Custom specs and sizes are our main business. Tell us what you need and we’ll make it
Rapp Industrial Sales 724 789-7853 [email protected]
25
Portable Hone Kits
ASI Small Portable Hone Kits
Honing Tools & Equipment
The ASI Portable Hone Kits aregreat for a wide variety ofhoning applications from½” to 3” bore. Madedurable right here in theUSA. These kits are easyto use and allow precisionadjustment and reliability. Allkits come with everything you need to honeright out of the box. Stones are easily replaced. Bore Size:
½” to 3”
ASI-B Kit
Part # Range UPC #730006
Hone Kit ASI-B KIT ¾” - 1¼” 01950Replacement
StonesASI-A1B ¾” - 1” 01911ASI-A2B 1”- 1¼” 01912
Bore Size:¾” to 1¼”
ASI-C Kit
Part # Range UPC #730006
Hone Kit ASI-C KIT 1”- 2” 01951
ReplacementStones
ASI-A1CD 1”- 1¼” 01913ASI-A2CD 1¼” - 1½” 01914ASI-A3CD 1½” - 1¾” 01915ASI-A4CD 1¾” - 2” 01916
Bore Size:1” to 2”
ASI-D Kit
Part # Range UPC #730006
Hone Kit ASI-D KIT 1½” - 2½” 01952
ReplacementStones
ASI-A1CD 1½” - 1¾” 01913ASI-A2CD 1¾” - 2” 01914ASI-A3CD 2”- 2¼” 01915ASI-A4CD 2¼” - 2½” 01916
Expand kit to 3”with these two sets
*ASI-A5CD 2½” - 2¾” 01917*ASI-A6CD 2¾” - 3” 01918
Bore Size:1½” to 2½”
ASI-BCD Kit
Part # Range UPC #730006
Hone Kit ASI-BCD KIT ¾” - 2½” 01953
Bore Size:¾” to 2½”
LARGEST RANGE & most popular kit. Includes B, C,and D kit all in one, for a great price. Expands to 3”with ASI-A5CD & ASI-A6CD.
*not standard in ASI-D Kit but available seperately
Expandable to 3”
Expandable to 3”
All kits come with everything you need tohone that range bore. Replacements areavailable separately. Order replacementstone sets by size bore you need to hone relative to kit purchased. Call for help.
Fits in any standard hand drill or drill press.
ASI-A Kit
Part # Range UPC #730006
Hone Kit ASI-A KIT ½” - ¾” 01949Replacement
StonesASI-A1A ½” - ⅝” n/aASI-A2A ⅝” - ¾” n/a
Bore Size:½” to ¾”
Replacement StoneSet
General Kit Information:
Rapp Industrial Sales 724 789-7853 [email protected]
Bore Size:3” to 15”
Expandable to 21”
Easily expandable to 21” byadding stone holders and boxsupports. Above 15” we rec-ommend double stone masterholders only. Accessories areon the following page.
26
Portable Hone Kits
Fits in any ½” or larger chuck hand drill or drill press.
Honing Tools & Equipment
Bore Size:3” to 21”
ASI-218 KitBore Size:3” to 5”
Contents:•Honing body with yoke and pinion shaft•One set of ASI-400 stone holders (installed)•One set of honing stones - ASI-5 220 grit
Part # UPC #730006
ASI-218 KIT 01954
Contents:•Honing body with yoke and pinion shaft•Two stone holder sets (ASI-400 and ASI-500)•Six sets of honing stones - 2 sets ASI-1 80 grit,
2 sets ASI-2 150 grit, 2 sets ASI-5 220 grit•Metal storage box
Part # UPC #730006
ASI-E KIT 01956
Contents:•Honing body with yoke and pinion shaft•Five stone holder sets (ASI-400 to ASI-800)•Three holder support boxes (ASI-A62 to ASI-A92)•Six sets of honing stones - 2 sets ASI-1 80 grit,
2 sets ASI-2 150 grit, 2 sets ASI-5 220 grit•Metal storage box
Part # UPC #730006
ASI-E KIT 01957
ExpandableOur most popular kit includeseverything you need to getstarted. Accessories are onthe following page.
Bore Size:3” to 6½”Expandable
Easily expandable to 9” byadding a stone holder ASI-600and a holder support box ASI-A62. Accessories are onthe following page.
ASI-E Kit
ASI-F Kit
Accessories for these items, including expanding kits’ hone size, are on following page
Honing Oil available in 5 gallon pales or 55 gallon drums
The ASI Heavy Duty Portable HoneKits are great for a wide variety of honing applications from 3”to 21” bore. Made right here in theUSA. These kits are strong, easy touse and allow precision adjustment.All kits come with everything you needto hone right out the box and are ex-pandable. We stock a variety of stonesets that are easily replaced.
ASI-218
ASI Large Portable Hone Kits
Rapp Industrial Sales 724 789-7853 [email protected]
27
Honing Tools & Equipment
Replacement Stone Sets
2 Stone / 2 Felt Set
•Single masterholders requireone set.•Double masterholders requiretwo sets.
For Use OnMaterial Grit Size 2 Stone
/ 2 FeltsUPC #730006
4 StonesOnly Set
UPC #730006
Cast Iron
Coarse C80 ASI-1 01976 ASI-1S 01981Medium C150 ASI-2 01977 ASI-2S 01982
Medium-Fine C220 ASI-5 01978 ASI-5S 01983Fine C280 ASI-3 01979 ASI-3S 01984
Extra Fine C400 ASI-4 01980 ASI-4S 01985All Metals Super Fine C600 ASI-6 non-stock ASI-6S non-stock
HardenedSteel Sleeves
Coarse A80 ASI-7
non-stock
ASI-7S
non-stockMedium A150 ASI-8 ASI-8SMedium-Fine A220 ASI-9 ASI-9S
Fine A280 ASI-10 ASI-10S
Steel
Coarse A80 ASI-11
non-stock
ASI-11S
non-stockMedium A150 ASI-12 ASI-12SMedium-Fine A220 ASI-13 ASI-13S
Fine A280 ASI-14 ASI-14S
Available in: 2 Stones with2 Felt Wipers
-OR-4 Stones Only Set
Important:
*Recommend Double Stone Master Holder only for above15” bore.
Box Support:(if needed)
Match Master Holders: Single OR Double
Choose Bore Size:
Bore Size: Single StoneMaster Holder
UPC #730006
Double StoneMaster Holder
UPC #730006 Box Support UPC #
7300063” to 4¾” ASI-400 01922 Not Available Not Needed for Bore Size
3¾” to 6½” ASI-500 01923 Not Available Not Needed for Bore Size6” to 9” ASI-600 01924 ASI-568 01932 ASI-A62 01940
8” to 12” ASI-700 01925 ASI-578 01933 ASI-A82 0194111” to 15” ASI-800* 01926 ASI-588 01934 ASI-A92 0194214” to 18” ASI-900* 01927 ASI-598 01935 ASI-A43 0194317” to 21” ASI-140* non-stock ASI-541 non-stock ASI-A54 non-stock
Box Support
Single StoneMaster HolderDouble Stone
Master Holder
Expanding Your Kit’s Bore Range is as easy as 1, 2, 3
ASI Large Hone Kit AccesoriesPortable Hone Kits
Rapp Industrial Sales 724 789-7853 [email protected]
Flex-Hone Tools
28
Honing Tools & Equipment
Stock Hones 180 Grit S/CSize inInches
Size inmm Part # UPC #
730006.157 4 BC-4mm 180 S/C 02035.197 5 BC-5mm 180 S/C 02045.217 5.5 BC-5.5mm 180 S/C 020431/4 6.4 BC-1/4 180 S/C 02047
.276 7 BC-7mm 180 S/C 02048
.315 8 BC-8mm 180 S/C 02051
.354 9 BC-9mm 180 S/C 020493/8 9.5 BC-3/8 180 S/C 02050
.394 10 BC-10mm 180 S/C 02053
.433 11 BC-11mm 180 S/C 02044
.472 12 BC-12mm 180 S/C 020551/2 12.7 BC-1/2 180 S/C 02056
.552 14 BC-14mm 180 S/C 020545/8 16 BC-5/8 180 S/C 02062
.709 18 BC-18mm 180 S/C 020593/4 19 BC-3/4 180 S/C 02064
.787 20 BC-20mm 180 S/C 020607/8 22 BC-7/8 180 S/C 020661 25.4 BC-1 180 S/C 02070
1⅛ 29 BC-1⅛ 180 S/C 020771¼ 31.8 BC-1¼ 180 S/C 020801⅜ 35 BC-1⅜ 180 S/C 020821½ 38 BC-1½ 180 S/C 020841⅝ 41 BC-1⅝ 180 S/C 020881¾ 45 BC-1¾ 180 S/C 020862 51 BC-2 180 S/C 02090
2¼ 57 BC-2¼ 180 S/C 020732½ 64 BC-2½ 180 S/C 020982¾ 70 BC-2¾ 180 S/C 021003 76 BC-3 180 S/C 02102
The Flex-Hone Tool is theperfect solution to many ofyour finishing, deburring,and edge-bending needs.Available in a wide varietyof sizes, abrasives, and grits to meet yourspecific requirements. Commonly used onBrake Cylinders, Hydraulics, Valve Guides,Disc Brakes, Engine Block Cylinders and Gun Barrels.
Fit in any standard hand drill or drill press.
From 4mm to 36”Stock most from 4mm - 3½”
Sizes:
Abrasive Type:
Silicon Carbide (most common) Aluminum OxideBoron CarbideTungsten CarbideLevigated Alumina
GRIT SIZE:
180 Grit (by far most common) Also common: 120, 240, 320Available from 20-800 Grit
Ho
ne
Op
tio
ns
:
Flex-Hone Tools
Rapp Industrial Sales 724 789-7853 [email protected]
Mounted Points
29
“A” Shapes
Mounted Points
A1 A2 A3 A4
A5 A6 A11
Mounted points remain one of the most versatileabrasive tools on the market. We stock a wideselection of mounted points and are able to supplyspecial items quickly as well. Standard “A” shapemounted points are an orange-red in color andhave an ⅛”or ¼” dia. x 1½“ long spindle.Made in the USA
Shape Abrasive Dia. x Length
UPC #730006
Max*RPM Spindle Grit
SizeA1 ¾” 2½” 04001 19,800
¼” MediumGrit
A2 1” 1¼” 04005 38,200A3 1” 2¾” 04007 16,100A4 1¼” 1¼” 04011 30,560A5 ¾” 1⅛” 04016 45,000A6 ¾” 1⅛” 04020 39,000A11 ⅞” 2” 04026 19,860A12 1¼” 04031 48,000A13 1⅛” 1⅛” 04035 33,950A14 ⅞” 04037 55,560A15 ¼” 04040 72,750A21 1” 1” 04043 34,500A22 ¾” ⅝” 04045 50,930A23 ¾” 1” 04047 39,370A24 ¼” ¾” 04050 76,500A25 1” n/a 04053 35,620A26 ⅝” n/a 04055 61,120A31 1⅜” 1” 04060 27,780A32 1” ⅝” 04063 38,200A33 1” ½” 04065 38,200A34 1½” ⅜” 04067 25,470A35 1” ⅜” 04070 38,200A36 1⅝” ⅜” 04073 23,520A37 1¼” ¼” 04075 30,560A38 1” 1” 04077 34,500A39 ¾” ¾” 04080 47,250A40 ¾” n/a 04083 47,250
A15
A12
A13 A14 A21
A22 A23 A25
A26
A24
A31 A32 A33
A34 A35 A36
A37 A38 A39 A40
“A” Shape
*Maximum Operating speed based on 1/2” overhang
Rapp Industrial Sales 724 789-7853 [email protected]
Mounted Points
30
“B” Shapes
Mounted Points
“B” Shape
*Maximum Operating speed based on 1/2” overhang
Shape Abrasive Dia. x Length Spindle UPC #
730006Max
*RPMGrit Size
B41 ⅝” ⅝” ⅛” 04100 33,750
MediumGrit
¼” 04101 61,120
B42 ½” ¾” ⅛” 04105 33,750¼” 04106 61,120
B43 ¼”
⅛”
04110 81,370B44 ⅜” 04113 68,400B45 04115 104,250B46 ⅛” 04117 105,000B47 ⅛” 04120 105,000B51 ¾” 04125 45,370
B52 ⅜” ¾” ⅛” 04128 45,370¼” 04127 81,000
B53 ⅝”⅛”
04140 60,000B54 ¼” ½” 04150 60,000B55 ⅛” ¼” 04155 105,000
B61 ¾” ⅛” 04157 38,250¼” 04158 50,930
B62 ½” ⅜”
⅛”
04160 41,020B63 ¼” 04162 92,400B64 ¼” 04164 105,000B65 ⅛” ⅛” 04166 105,000B70 ¾” ⅛” 04168 50,930B71 ⅝” 04170 61,120B72 ½” ⅛” 04172 73,500B73 ½” 04174 73,500B74 04176 105,000B81 ¾” 04178 50,930B82 ½” ¼” 04180 76,390B83 ⅜” 04182 87,600B84 04184 105,000B90 ½” ½” 04186 34,500
B91 ½” ⅝” ⅛” 04188 34,500¼” 04189 61,500
B41 B42
B43 B44
B45 B46B47
B51
B52 B53 B54
B55
B61 B62
B70
B63B64
B65 B72
B73 B74
B83 B84B90 B91
B71
B82B81
Made in the USA
Standard “B” shape mounted points arean orange-red in color and have an⅛”or ¼” dia. x 1½“ long spindle.
Other grit sizes are available.“B” shapes continued on next page
Rapp Industrial Sales 724 789-7853 [email protected]
“B” Shape - Continued
Shape Abrasive Dia. x Length Spindle UPC #
730006Max
*RPMGrit Size
B92 ¼” ¼”
⅛”
04192 81,370
MediumGrit
B93 04194 105,000B94 04196 105,000B95 ⅛” 04198 105,000B96 ⅛” ¼” 04201 105,000B97 ⅛” ⅜” 04205 105,000B98 ¼” 04207 105,000
B101 ⅝” ⅛” 04210 33,750¼” 04211 61,120
B102 ⅝” ½”
⅛”
04215 45,370B103 ⅝” 04217 61,120B104 ⅜” 04220 68,400B105 ¼” ¼” 04222 104,250B106 ⅛” 04224 105,000
B111 ⅛” 04226 33,750¼” 04227 66,000
B112 ⅜” ½”
⅛”
04230 45,370B113 ¼” ¼” 04232 81,370B114 ⅜” 04234 68,400B115 ⅛” 04236 105,000
B121 ½” n/a ⅛” 04240 45,370¼” 04241 76,390
B122 ⅜” n/a⅛”
04245 61,650B123 n/a 04250 104,250B124 ⅛” n/a 04255 105,000
B131 ½” ½” ⅛” 04258 34,500¼” 04259 61,500
B132 ⅜” ½”
⅛”
04263 45,370B133 ⅜” ⅜” 04265 54,000B134 ⅜” 04267 61,650B135 ¼” ½” 04269 60,000B136 ¼” 04275 77,250
Made in the USA
Mounted Points
31
*Maximum Operating speed based on 1/2” overhang
B96B97
B98B101
B102 B103B104
B105
B106 B111 B112B113
B114B115 B121 B122
B123 B124 B131 B132
B136
“B” Shapes - Continued
Mounted Points
Standard “B” shape mounted pointsare an orange-red in color and havean ⅛”or ¼” dia. x 1½“ long spindle. Other grit sizes are available.
B92 B93 B94 B95
B133 B134B135
Rapp Industrial Sales 724 789-7853 [email protected]
Mounted Points
32
“W” Shapes
Mounted Points
“W” Shape
*Maximum Operating speed based on 1/2” overhang
Shape Abrasive Dia. x Length Spindle UPC #
730006Max
*RPMGrit Size
W141 ⅛” 04300 105,000
MediumGrit
W142 ¼” 04304 105,000W143 ⅛” ⅛”
⅛”
04306 105,000W144 ⅛” ¼” 04310 105,000W145 ⅛” ⅜” 04313 105,000W146 ⅛” ½” 04317 105,000W149 ¼”
⅛”
04320 105,000W151 ⅛” 04322 105,000W152 ¼” 04325 105,000W153 ⅜” 04327 80,850W154 ½” 04330 70,500W157 ¼”
⅛”
04332 123,000W158 ¼” ⅛” 04335 105,000W159 ¼” 04337 92,400W160 ¼” ¼” 04340 81,370W161 ¼” 04343 77,250W162 ¼” ⅜” 04345 68,400W163 ¼” ½” 04347 60,000W164 ¼” ¾” 04350 45,900W165
⅛”
04352 107,400W166 ⅛” 04355 96,970W167 ¼” 04357 75,000W168 04360 68,400W169 ⅜” 04363 61,650W170 ½” 04365 52,500W171 ¾” 04367 37,120W172 ⅜”
⅛”
04370 99,370W173 ⅜” ⅛” 04373 87,600W174 ⅜” ¼” 04375 69,000W175 ⅜” ⅜” 04377 54,000W176 ⅜” ½” 04380 45,370W177 ⅜” ¾” 04383 33,750W178 ⅜” 1” 04385 26,250W179 ⅜” 1¼” 04387 18,750
“W” Shapes
Made in the USA
Standard “W” shape mounted points are an orange-red in color andhave an ⅛”or ¼” dia. x 1½“ long spindle and 3/8” x 2” long spindle.
Other grit sizes are available.
“W” shapes continued on next page
Rapp Industrial Sales 724 789-7853 [email protected]
Mounted Points
33
“W” Shapes - Continued
Mounted Points
“W” Shape - Continued
*Maximum Operating speed based on 1/2” overhang
Shape Abrasive Dia. x Length Spindle UPC #
730006Max
*RPMGrit Size
W181 ½”
⅛”
04390 73,390
MediumGrit
W182 ½” ⅛” 04393 73,500W183 ½” ¼” 04395 51,750W184 ½” ⅜” 04397 41,020
W185 ½” ½” ⅛” 04400 34,500¼” 04401 61,500
W186 ½” ¾” ⅛” 04406 26,250¼” 04407 51,000
W187 ½” 1” ⅛” 04410 20,620W188 ½” 1½” ¼” 04412 30,370W189 ½” 2” ¼” 04415 24,000W190 ⅝”
⅛”
04417 61,120W191 ⅝” ⅛” 04420 58,870W192 ⅝” ¼” 04423 43,120W193 ⅝” ⅜” 04425 32,250
W194 ⅝” ½” ⅛” 04427 29,400¼” 04428 56,400
W195 ⅝” ¾” ⅛” 04430 22,120W196 ⅝” 1” ¼” 04433 35,250W197 ⅝” 2” ¼” 04435 21,000W198 ⅝” 2½” ¼” 04437 16,500W199 ¾”
⅛”
04440 50,930W200 ¾” ⅛” 04443 50,930W201 ¾” ¼” 04447 38,250W202 ¾” ⅜” 04450 30,600
W203 ¾” ½” ⅛” 04453 25,500¼” 04454 50,930
W204 ¾” ¾”
¼”
04457 18,900W205 ¾” 1” 04460 34,500W206 ¾” 1¼” 04463 28,720W207 ¾” 1½” 04465 24,000W208 ¾” 2” 04467 18,750W209 ¾” 2½” 04469 15,000
“W” Shapes
Made in the USA
Standard “W” shape mounted points are an orange-red in color andhave an ⅛”or ¼” dia. x 1½“ long spindle and 3/8” x 2” long spindle.Other grit sizes are available. “W” shapes continued on next page
Rapp Industrial Sales 724 789-7853 [email protected]
Mounted Points
34
“W” Shapes - Continued
Mounted Points
“W” Shapes
“W” Shape - Continued
*Maximum Operating speed based on 1/2” overhang
Shape Abrasive Dia. x Length Spindle UPC #
730006Max
*RPMGrit Size
W210 ⅞”
⅛”
04472 43,650
MediumGrit
W211 ⅞” ⅛” 04475 43,650W212 ⅞” ¼” 04477 33,750W213 ⅞” ⅜” 04480 27,000W214 ¼” 04483 32,600W215 1” ⅛” 04485 38,200
W216 1” ¼” ⅛” 04491 30,520¼” 04492 38,200
W217 1” ⅜”
¼”
04495 38,200W218 1” ½” 04498 38,200W219 1” ¾” 04500 35,100W220 1” 1” 04502 25,500W221 1” 1½” 04505 19,120W222 1” 2” 04509 15,900W223 1” 2½” 04512 12,370W224 1” 3” 04515 10,605W225 1¼” ¼” 04517 30,560W226 1¼” ⅜” 04520 30,560W227 1¼” ½” 04523 30,560W228 1¼” ¾” 04525 30,520W229 1¼” 1” 04527 24,000W230 1¼” 1¼” 04530 20,400W231 1¼” 1½” 04533 17,620W232 1¼” 2” 04535 14,250W233 1¼” 2½” 04537 10,880W234 1¼” 3” ⅜” 04540 24,380W235 1½” ¼”
¼”
04543 25,470W236 1½” ½” 04545 25,470W237 1½” 1” 04547 22,500W238 1½” 1½” 04550 15,600W239 1½” 2” 04553 12,750W240 1½” 2½” ⅜” 04555 21,000W241 1½” 3” 04557 18,000W242 2” 1” ¼” 04560 19,100W243 2” 1½”
⅜”
04563 19,100W244 2” 2” 04565 19,100W245 2” 2½” 04567 19,100W246 2” 3” 04570 16,500
Made in the USA
Standard “W” shape mounted points are an orange-red in color andhave an ⅛”or ¼” dia. x 1½“ long spindle and 3/8” x 2” long spindle.
Other grit sizes are available.
Rapp Industrial Sales 724 789-7853 [email protected]
Terms and Conditions
General Information
35
General Information
Lead times:Time is important to you. When a product is used in production orin daily processes you can’t wait 6 or more weeks like our competi-tors offer. We offer same day shipping on most stock items if orderedbefore noon and an industry best of 1-3 week normal delivery on specialmanufacture items. Call us today.
HistorySticks & Stones Unlimited, Inc. was established in 1973 by Jack andJerry Brewer, to supply a niche market in the abrasive industry. Thisfather and son team set out to fill a need by supplying dressing andhoning sticks to users in the Texas area. We have grown from a garage start up to a large manufac-turing facility in Arlington, Texas. We are centered in between Dallas and Fort Worth near the DFWAirport. 40+ years later, still family owned and operated we have expanded to serve domestic andinternational clientele focusing on specialized abrasive solutions in industrial applications. We proudlymanufacture made in the USA abrasive products focusing on quality and customer service. Our abra-sive product line has also grown to encompass many more products used in the industrial, honing,sharpening and MRO markets. We are able to supply the small job house or the largest warehousedistributors. We have the experience matched with the right abrasive to fit every application.
Minimum Order:
Transportation:
Weights:
Returned Goods:
Damaged Goods:
Pricing:
ManufacturedAllowance:
All orders are subjet to a minimum charge of $20.00 plus shipping. Anyorder entered having a net invoice value of less than minumum may be in-voiced at $20.00 plus shipping.
All orders are shipped by an approved courier collect or prepaid andadded to the invoice.
All catalog weights are approximate and are for guidance only.
Goods may not be returned without approval. Any return must be accompanied by a Returned Goods Authorization number (RGA #) furnished by sales dept.
Damage must be reported immediately to carrier and claim filed at the dis-tributor end. Hidden damage must be reported to us within five workingdays of receipt of goods.
Prices Are Subject To Change Without Notice
All manufactured or special order items are subject to plus or minus 10%allowance.
Rapp Industrial Sales 724 789-7853 [email protected]