Step impulse
2
PROGRAM:-3 AIM: Program for the generation of unit impulse signal. TOOLS REQUIRED: P.C , matlab 7.0 PROGRAM: t=-2:1:2; >> y=[zeros(1,2),ones(1,1),zeros(1,2)]; >> stem(t,y); >> ylabel('amplitude'); >>xlabel(‘n’) OBSERVATION: RESULT: Desired waveform has been obtained. PRECAUTION:
-
Upload
ashok-singh -
Category
Technology
-
view
46 -
download
0
Transcript of Step impulse
PROGRAM:-3AIM:Program for the generation of unit impulse signal.
TOOLS REQUIRED:P.C , matlab 7.0
PROGRAM:t=-2:1:2;>> y=[zeros(1,2),ones(1,1),zeros(1,2)];>> stem(t,y);>> ylabel('amplitude');>>xlabel(‘n’)
OBSERVATION:
RESULT:Desired waveform has been obtained.
PRECAUTION:1. Observe the waveform carefully.2. Take the value of constant keeping care of all constraint.