5S Implementation - The first step to continuous improvement
Step by step guide for insulation implementation
Transcript of Step by step guide for insulation implementation
Step By Step Guide For Insulation Implementation
Attic Insulation
• Insulation is the process of covering the house some specialized materials in order to prevent the air let out and let in to the particular extent.
• Thus thereby makes the climatic condition inside the house very moderate despite any kind of conditions prevailing outdoor.
• This insulation is done for both hot climate and cold climatic condition.
Purpose Of Insulation
• The insulation implementation in house serves for many purposes like
• Pest and rodent controller• Noise retarder• Energy saver• Reduction in usage of non-renewable energy• Reduces the utility bills.
Insulation Implementation• This is one of the home improvement methods which are
purely done by the contractors to give the accurate efficiency.
• This process is not one time investment, they should be maintained and changed periodically, when subjected with single flaws.
• The maintenance process doesn’t need the professionals, they can done even by the individuals (https://storify.com/kimtan/maintenance-tips-for-attic-insulationinstallation )
Process #1
• Energy inspection: this is done by the professional energy inspectors.
• They are equipped with the thermo scan which shows the variations in the climatic condition very clearly.
• Then the energy inspectors decides for the type of insulations and portion to be insulated from the incurred results.
Process #2• After the energy inspection process, the main thing to
consider for is the selection of the materials.
• Such things are suggested by the professionals, though further clarifications should be done about the materials as all the types of insulations have several pitfalls (http://ezinearticles.com/?Pitfalls-of-Attic-Insulation-Types&id=9175739)
• The insulation types should be selected considering the health factors of the habitats of the house
Process #3• It is very important to prepare the home for
insulations, before the start of the process. • The gas and water supplies in that particular areas
should be blocked in order to get rid of electric sparks.
• It is wise to keep the children away from the insulation process because they catch up with the disease, as the immunity is in developing stage.
• Look some of the safety precautions - http://athoins.blogspot.com/2015/12/7-safety-precautions-to-be-followed-for.html
Process #4
• The insulation implementation has started at this stage. During this process, the professionals should be kept with more comfort by providing them with the enough of the insulation equipment.
• Periodical checking of the insulated places is must along with the implementation process.
• This will help to recover the problem instantly once the defect is found.
Process #5
• As a final stage, the insulated house should be checked for the air leaks and defects with the help of the energy inspectors.
• The defect found any, should be instantly informed to the contractors, thus the corrections are made as soon as the flaw is found.
• Above are the process of insulation implementation. As this process involves more some of the amount as initial investment, the implementation should be done with care.
• After the insulating the house, there comes the responsibility of the folks in maintaining periodically.
• Aesofutah (http://aesofutah.com) is one of the attic insulation contractors in the area of Utah providing efficient insulation implementation service with the experienced energy inspectors.
• They provide insulations with all type of materials and for all kind of architecture.
• https://www.facebook.com/Insulation-511640412323346
• https://plus.google.com/u/0/b/104097230335631761122/
• http://athoins.blogspot.com/