Calculation of Weight of Product RD Group TECHNICAL SERVICES DEPT.

Material:

Carbon &

ferritic

stainless

steels

density: 7800

Sheet / plate Thickness (mm)Width (mm) Length (m)

flat bar 1 kg:

Thickness (mm)Width (mm)

Coil kg/m:

Round Diameter (mm) Length (m)

bar / wire 1 kg:

A/F (mm) Length (m)

Square bar 1 kg:

A/F (mm) Length (m)

Hex bar 1 kg:

A/F (mm) Length (m)

Oct bar 1 kg:

Thickness (mm)Leg 1 (mm) Leg 2 (mm) Length (m)

Angle bar 1 kg:

OD (mm) ID (mm) Length (m)

Hollow bar 1 kg:

Round OD (mm) WT (mm) Length (m)

tube / pipe 1 kg:

Square / rect Side 1 (mm) Side 2 (mm) WT (mm) Length (m)

tube / pipe 50 50 5 6 kg: 42.12

Note: All results are approximate. Refer to second sheet for calculation fomulas.

www.rdsteelgroup.com/

Insert dimensions for the required product shape in orange boxes, then read off the weight in the red boxes at right. Note - Densities shown in green boxes are typical. Add specific density under "others" for different materials.

TECHNICAL SERVICES DEPT.

Austenitic

stainless

steels

Copper

alloys

(Note)

Aluminium

alloys

(Note)

Others

(Note)

7900 8470 2700 5000

42.66 45.74 14.58 27.00