Steel guard presentation
description
Transcript of Steel guard presentation
Steel Guard “nanocoat” Antirust Compound
Our EndeavourA Rust Free Environment
What is Steel Guard “nanocoat” ?
It is a unique , ready to use , water based rust preventing compound.
Based on Nanotechnology , it acts at the molecular level of the steel surface and completely restores it to rust free condition.
It also increases the Bonding Strength of the applied material with Cement, Paint , Enamel, Epoxy etc by more than 100%
Technical Data Sheet (TDS) : Appearance : Light Yellow & Green
Odor : Mild to Light
Specific Gravity: 1.30 gm / cm.
Viscosity: 1.035 (approx)
Film Thickness: 0.2 microns.
pH Dispersion: 1.5 to 3.5 pH units
Flash Point: Applicable
Solid Content: 50% (+- 5%) (weight % usage)
Temperature Test: Tested under – 196 C to + 300 C
Application: Brushing , Spraying & Dipping Method
Treatment Time: 3 to 5 Seconds
Drying Time: 30 Min (Max) 24 Hrs. curing time.
Coverage Area : Minimum 400 Sq.ft. – 1000 Sq.ft / Ltr.
Minimum Life : 44,000 hrs. or 5 Years.
How to Apply :
The surface to be applied should be clean & free from any dust , dirt , grease , oil & old paint.
It can be applied by either Spraying , Brushing , Dipping or any other method.
When applied , the colour gradually changes to blue/ black with white spots (because of rust) indicating that the reaction has taken place.
Should be applied preferably between the temperatures ranging from 5 C to 45 C for excellent results.
The drying time is 30 min and curing time is 24 hrs. which can be reduced further using blower fans , heat lamps etc.
Any skilled or unskilled worker can apply it .
Precautions:
Pour / Unload Steel Guard only in a Plastic / PVC container and no other metallic container.
Wear proper hand gloves, industrial masks, eye goggles for extra safety.
Incase of body contact , please wash off with soapy water first and than plain water.
Safe & Eco Friendly Product : Complies to RoHS (Reduction of Hazardous
Substance directive 2002/95/EC) norms.
Is an Inorganic, Non – Inflammable , Non evaporative , Non – toxicant Fire Retardant liquid having no Polar formation and Electro Static Effect on Steel.
Benefits of Steel Guard “nanocoat”: Unique , one of its kind water based rust preventer & remover which
makes the applied surface rust free for 44,000 hrs or 5 Years minimum.
A very thin layer 0.02 microns is formed making it resistant to Scratch & corrosion.
Bonding & Adhesion strength of the applied surface increases by more than 100% with Cement , Enamel , Paint , Epoxy etc.
Since is water based (Viscosity of 1.035) , it gives a much higher coverage area as compared to other conventional primers.
Avoids repetitive painting & repainting of structures and gives a longer , durable life avoiding huge maintenance & replacement cost of expensive machinery.
Can be applied by any skilled & unskilled labour and is a an Eco – friendly & Non – hazardous product.
How Does Steel Guard Work ? Steel Guard forms a protective layer consisting of
millions of nuclei on the principles of nanotechnology.
Penentrates into very fine cracks & pores of the steel surface and creates a dense forest of micro crystals which acts as a barrier between the surface & atmosphere.
Vertical & Peripheral Crystallization takes place which results in an arrangement being generated within the surface and not above it.
The micro crystals formed creates their own space within the molecular gap of steel and stops the conversion of Fe2 & Fe3 ions into hydroxy carbonates i.e. Rust.
The arrangement formed is so closely interlinked & interwoven , it does not allow gas & water to penetrate inside iron, thus stopping it from corroding.
Some FAQ’s
Doesn’t water in Steel Guard cause Rust ?No , the water in steel guard contains a rust inhibitor which prevents it from happening.
Will Steel Guard wash off in Rains ?No . Once applied properly , dried & cured for 24 hrs. rain cannot remove the coating.
Can Steel Guard protect from Acid & Acidic Fumes ?Yes , in such applications it acts as a base primer on which any other enamel , epoxy , paint can be applied .
Can Steel Guard be removed after coating ?Yes . Heat the treated metal upto 600 C to loosen the grip of Steel Guard and than brush it off.
How Does Steel Guard improve the Bonding Strength of Steel ?
Dense forest of micro crystals are formed which has great affinity towards cement & steel becoming inseparable up to 600 C.
Each crystal nucleus of Steel Guard nanocoat has power to attract other cement & paint molecules by virtue of crystal forces and forms a TRAP for molecules of paint / cement which do not have sufficient energy to escape.
Chemisorptions takes place where the molecules are held by a strong chemical bond formed between molecules of Steel Guard & Steel.
Each crystal of Steel Guard nanocoat is cubic shaped ( diamond shaped – 3 & 4 axes) which helps in increasing the adherence of steel / paint with substrate.
Steel Guard “nanocoat” – A Definitive edge over others …..
First water based , eco friendly rust preventer cum rust remover.
No extra layer is formed(0.02 microns) i.e. resistant to scratch .
Penetrates inside the pores of the steel and removes any existent rust & restores to rust free condition.
Increases the bonding strength by more than 100 % whereas other such products reduce the bonding with concrete , paint etc.
Effective in highly corrosive areas like chemical plants , Petroleum & refinery units , leather plants , saline environment as a base primer.
Highly economical & cost effective with much better coverage area as compared to others.
Easy to apply with minimum surface preparation. Can be dipped , brushed , sprayed or any other method by any skilled & unskilled labour .
Usages :
Iron & Steel Industry
Fabrication Industry
Construction Industry
Chemical Industry
Railways
Oil & Gas Industry
Maritime & Ship Building Industry
Automobile Industry
Industrial & Domestic Machinery Mfgs.
Industrial & Domestic Hardware Mfgs.
Unlimited Uses.
Some of our Esteemed & Potential Customers
Tata Steel , Jamshedpur
Rajuri Steel , Jalna
Steel Authority of India , Kolkata
Steel Authority of India , Ghaziabad
G.P.Ispat , Raipur
Himadri Chemicals , Kolkata
Maharashtra State Electricity Board
Godrej & Boyce Mfg. Co. Ltd.
DMRC
Indian Road Congress , New Delhi
Sole Distributor For Tamilnadu :Sreelakshmi Traders,45A, Sreenivasa Reddy Street, T Nagar, Chennai – 600 017Tel +91 44 24343343 / 24347397/ Fax +91 44 24348442Mobile +91 9840985952 E-mail [email protected]
Lets start a revolution in saving our national wealth ……….
Thank you