Steel Beam Finishing
-
Upload
altayeb-yassin -
Category
Documents
-
view
224 -
download
0
Transcript of Steel Beam Finishing
-
8/13/2019 Steel Beam Finishing
1/8
Long Carbon EuropeSections and Merchant Bars
Beam Finishing
-
8/13/2019 Steel Beam Finishing
2/8
2
Finished beams: the competitive solution to meet your needs
From a vision to the industrial application
The ArcelorMittal beam finishing centre C3P in collaboration with ArcelorMittal Commercial Sections TechnicalAdvisory enables to build up specific design based on our products for Taylor made solutions fulfilling our clients
needs. Moreover, our practical experience combined with the know-how from the Research Centre allows
developing innovative products creating our customers vision.
Large advantages for our clientsOur fabrication and finishing operations enable a significant time savings for our clients and reduce costs
substantially by:
shortening the production chain complementing the clients finishing capacity
using powerful tools on an integrated site where the widest range of structural steel sections in
Europe are rolled
customized fabrication and surface treatment services, suited to your requirements
providing high-performance capabilities and logistics, adapted to your constraints.
A true industrial partnershipArcelorMittal beam finishing centre offers complete range of fabrication and finishing operations to improve the
technical capabilities from our partners: steel fabricators and general contractors:
Cold sawing
Drilling
Cambering
Bending
Oxyacetylene cutting
Flame cutting
Robotic plasma cutting
-
8/13/2019 Steel Beam Finishing
3/8
3
Meet your deadlines with a strong partner
Drilling
Drilling of straight or cambered steelsections
Drilling up to 120mm diameters
Cold sawing Straight and slanting cuts up to a section height of 1100 mm
Reduced tolerances
Cambering Cambering according to
circular, parabolic or curvesdetermined by points.
Cambering along both
strong and weak axis.
Bending Bending to a small radius of curvature on a roll
bending machine.
Bending possibility along both axis of the section.
Bending possibilities for beams along the
strong axis
-
8/13/2019 Steel Beam Finishing
4/8
4
Your dreams meet our know-how
Flame cutting, Robotic plasma cutting
Butt weld preparation of jumbo beam
Fabrication of cellular beams:
Angelina and ACB
Fabrication by flame-cutting the web
and reconstitution by welding the two
halves.
Fabrication of hybrid steel sections, by
combining different sections sizes and/or
steel grades.
Fabrication of cellular beams with variable
depth.
Manufacturing of cambered cellular
beams.
Flame cutting of T-sections, profiling and welding preparation
Cutting out to manufacture cellular beams (Angelina, ACB
(Arcelor Mittal Cellular Beams))
Plasma cutting for thicknesses from 5 to 25 mm
Flame cutting for thicknesses from 8 to 125 mm
Steel section end preparations
Oxycutting Separation Assembling andWelding
-
8/13/2019 Steel Beam Finishing
5/8
5
Our commitment to fulfill your desires
Welding and Stud Welding
Automatic and manual welding
(stiffeners, top plates, bottom
plates, butt plates ...)
Welding of stud-connectors with
a diameter from 13 mm to 22 mm
(7/8)
Welding according to EN ISO 14555valid for bridges application
Surface treatment
Shot blasting to grades SA 2,5 and SA 3
Application of a paint system
(primer, under and top coats)
Hot dip galvanizing according to
EN ISO 1461
Metal spray galvanizing
Approved systems (ACQPA, DDE,
SNCF, DB-TL, ZTV-KOR, FS, ...)
Cross column
-
8/13/2019 Steel Beam Finishing
6/8
6
Applications: Light and transparent structures, sustainability.
INDUSTRIAL HALL
OFFICES
COMPOSITE BRIDGE
EXHIBITION HALL
ROAD BRIDGE
RAILWAY BRIDGE
EXHIBITION HALL
-
8/13/2019 Steel Beam Finishing
7/8
7
Let us build together innovative projects
EXHIBITION HALLINDUSTRIAL HALL
OPEN CAR PARK
ANGELINA INDUSTRIAL HALL
OPEN CAR PARK
ANGELINA INDUSTRIAL HALL
FOOD STORE
-
8/13/2019 Steel Beam Finishing
8/8
Technical advisory Finishing
Innovation &ConstructionDevelopment
We are happy to provide free technical
advice to optimise the use of our products
and solutions in your projects and to answer
your questions about the use of sections
and merchant bars. This technical advice
covers the design of structural elements,
construction details, surface protection, fire
safety, metallurgy and welding. Our specialists
are ready to support your initiatives anywhere
in the world. To facilitate the design of your
projects, we also offer software and technicaldocumentation that you can consult or
download from our website:
www.arcelormittal.com/sections
Contact:[email protected]@arcelormittal.com
As a complement to the technical capacities
of our partners, we are equipped with high-
performance finishing tools and offer a wide
range of services, such as:
drilling
flame cutting
T cut-outs
notching
cambering
curving straightening
cold sawing to exact length
welding and fitting of studs
shot blasting
surface treatment
At ArcelorMittal we also have a team of
multi-product professionals specialising in
the construction market: the Innovation &
Construction Development (ICD) division.
A complete range of products and solutions
dedicated to construction in all its forms:
structures, facades, roofing, etc. is available
from the website
www.constructalia.com
YOUR CONTACT
ArcelorMittalCommercial Sections SA.Eurostructures BeamFinishingZ.I. GadderscheierL-4984 SanemLuxembourg
T.: +352 5313-3057www.arcelormittal.com/sections
V
ersion
2010-1