Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company...

6
22018 Gostick Place North Vancouver, BC, V7M 3G3 T 6049900546 | F 6049900583 www.horizoneng.ca Horizon Engineering Inc. Statement of Qualification (February 2017)

Transcript of Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company...

Page 1: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

220‐18 Gostick Place North Vancouver, BC, V7M 3G3 T 604‐990‐0546 | F 604‐990‐0583 www.horizoneng.ca 

Horizon Engineering Inc. 

Statement of Qualification (February 2017) 

Page 2: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

Statement of Qualification (February 2017) 

2  

Table of Contents 

1.  Company Overview ..........................................................................................................................................3 

1.1.  Our Goals and Values ...............................................................................................................................3 

1.2.  Diversity and Flexibility .............................................................................................................................3 

1.3.  Affiliation ..................................................................................................................................................4 

1.4.  Awards and Certifications .........................................................................................................................4 

2.  Our Services ......................................................................................................................................................4 

2.1.  Subsurface Investigation ..........................................................................................................................4 

2.2.  Engineering Analyses ................................................................................................................................4 

2.3.  Excavation Shoring Design ........................................................................................................................5 

2.4.  Construction Reviews & Quality Assurance .............................................................................................5 

3.  Our Clients ........................................................................................................................................................5 

4.  Our Team ..........................................................................................................................................................6 

4.1.  Company Partners ....................................................................................................................................6 

4.2.  Staff ...........................................................................................................................................................6 

 

 

 

 

 

 

 

 

 

   

Page 3: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

Statement of Qualification (February 2017) 

3  

1. Company Overview 

Since  establishment  in  1997,  we  have  provided 

geotechnical  engineering  services  for  over  4000 

projects.  Horizon  Engineering  is  a  geotechnical 

consulting company and member of the Association 

of  Consulting  Engineering  Companies  of  British 

Columbia  (ACEC‐BC)  and  provides  consulting 

services  for  new  construction  as  well  as 

renovations/retrofits.  Our  services  include 

geotechnical  assessments  comprising  subsurface 

investigation,  laboratory  testing  and  analyses 

followed  by  design,  report  and  specification 

preparation, and field reviews during construction.  

Our  approach  is  collaborative  and  flexible  with 

regard  to working with  clients,  other  consultants, 

and  contractors  in  order  to  develop  the  optimal 

solution for a particular design challenge.  

1.1. Our Goals and Values 

We hold quality to be paramount. Our dedication to 

excellence and commitment to client satisfaction is 

evident  in  our  4000+  projects.  Maintaining 

consistent, high quality standards is essential to our 

continued growth and long‐term involvement in the 

industry  and  in  our  communities.  Safety, 

environmental  compliance  and  quality  are  core 

focus  areas  for  every  employee  at  Horizon 

Engineering. Our technical team has participated in 

numerous seminars and technical presentations and 

has published several papers. We aim to: 

Provide personalized service  Be  responsive,  decisive,  practical,  flexible,  and collaborative 

Promote  corporate  systems  that  promote 

efficiency through quality and cost control 

Undertake responsible development of ourselves, 

our company, our profession, and our community, 

where  our  community  includes  our  customers’ 

projects 

Maintain  technical  review of our work,  including 

peer reviews and strategic alliances with specialist 

consultants, as required 

1.2. Diversity and Flexibility 

Horizon  Engineering  is  proud  to  have  a  diverse 

engineering team. We do business  in the following 

languages:  English,  Farsi,  Mandarin,  Cantonese, 

Russian, Spanish, and Afrikans. At Horizon, one‐third 

of our current engineering staff are women which is 

a goal of Engineers Canada. We value the individuals 

and their lifestyle choices, and therefore, staggered 

work  hours  and  telecommuting  enable  work‐life 

balance  for  professionals  pursuing  additional 

education and/or with family obligations.  

Page 4: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

Statement of Qualification (February 2017) 

4  

1.3. Affiliation 

We believe in undertaking responsible development 

of  our  profession  and  our  community.  Horizon 

engineers  are  involved  in  the  following 

organizations on a volunteer basis: 

Association  of  Professional  Engineers  and 

Geoscientists of B.C. (APEGBC) 

Division  for  Advancement  of  Women  in 

Engineering and Geoscience (DAWEG, a division of 

APEGBC) 

Consulting Engineers of British Columbia (ACEC) 

Vancouver Geotechnical Society (VGS)  International Society of Micropiles (ISM) 

Canada Dam Association (CDA 

1.4. Awards and Certifications 

2001  Consulting  Engineers  of  British  Columbia 

Award of Merit for Soft Engineering for the ‘Delta 

Shake  and  Shingle  Landfill  Fire  Emergency 

Earthworks  Geotechnical  Instrumentation  and 

Assessment’. 

Organizational  Quality  Management  (OQM) 

certification.  

2. Our Services We provide a  full range of geotechnical consulting 

services  to  our  clients.  Areas  of  expertise  include 

subsurface  investigation  and  characterization,  site 

specific  seismic  ground  response  assessment, 

liquefaction  potential  assessment,  foundation 

selection and design (e.g. soft soils, pile foundation, 

etc), slope hazard assessment, and slope retention 

design: 

2.1. Subsurface Investigation 

Backhoe / excavator test pitting  Shovel / hand auger test pitting  Auger drilling and sampling 

Mud‐rotary drilling and sampling 

Sonic drilling and sampling 

Odex drilling and sampling 

Becker  /  environmental  hammer  drilling  and 

testing 

Falling  Head  and  Constant  Head  percolation testing 

Standpipe piezometer / inclinometer installation 

Wildcat penetrometer testing 

DCPT and SPT testing  Down‐hole  seismic  shear  wave  velocity 

measurements 

Cone Penetration Testing (CPT) 

 

2.2. Engineering Analyses 

Shallow and deep foundation (pile) design, such as timber  piles,  steel  driven  piles,  drilled  shafts, 

micropiles, and helical piles 

Ground  improvement  design,  including  soil‐

cement mixing, stone columns, and pre‐loading 

Excavation  shoring  and  underpinning  design 

(temporary and permanent) 

Seismic  design,  including  preparation  of  site‐

specific ground response spectra, soil liquefaction 

analysis, and seismic anchor design 

Pile lateral response analysis  Stormwater management system design 

Slope hazard assessment, including slope stability 

and landslide runout analyses 

Retaining  wall  design,  including  global,  sliding, overturning  and  internal  stability  assessment  of 

segmental  (MSE),  concrete wall, permanent  tied 

back shoring, and geogrid‐reinforced solutions 

Erosion and sediment control (ESC) design 

Groundwater seepage analysis 

Page 5: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

Statement of Qualification (February 2017) 

5  

2.3. Excavation Shoring Design 

Excavation  shoring  is  typically  required  to  retain 

soils adjacent to deep excavations to either facilitate 

new  construction  or  other  earth  retention 

applications and to provide a safe work environment 

for  construction  crews.  Horizon  Engineering  has 

significant experience in the design and construction 

field  review  of  the  following  types  of  shoring 

systems which are the most common  in the Lower 

Mainland: 

Tie‐back  soil  anchors  with  shotcrete  panels 

(including  underpinning,  lift‐off  test,  proof  and 

performance testing) 

Lock Block retaining walls 

 

2.4. Quality Control Testing 

Horizon  Engineering  provides  quality  control  (QC) 

testing  services  for  construction  projects.  The 

following summarizes our services 

Wildcat Penetrometer (see brochure) Compaction 

Field Density Testing (see brochure)  Cone Penetration Testing (see brochure)  Standard and Modified Proctor Tests 

Atterberg Limits Testing 

Sieve Analysis (gradation testing)  Moisture Content Testing 

Vibration Monitoring  (e.g. during pile  installation 

or rock blasting) 

Settlement  Monitoring  (e.g.  for  structures  or 

preloading embankments) 

Monitoring  Structure  By  Installation  of  Tell‐Tale 

Monitors on Walls and Structural Elements 

2.5. Construction Reviews & Quality Assurance 

In  accordance  with  the  British  Columbia  Building 

Code  2012  Letters  of  Assurance  program,  the 

Geotechnical  Engineer  of  Record  is  obligated  to 

carry  out  field  reviews  in  order  to  verify  that 

construction is in general conformance with design 

and  actual  conditions  encountered  during 

construction  are  consistent  with  design 

assumptions.  

 

For  a  complete  list  of  our  engineering  services 

please visit our website.  

3. Our Clients We  serve  a  wide  variety  of  clients  and  have 

established  long  term  relationships  with  clients, 

consulting  firms,  developers,  and  municipalities. 

Our clients commonly include: 

Developers, Home Owners, Strata Corporations 

Design‐Build and P3 Contractors  General, Earthworks, Excavation and Pile Driving Contractors 

Architectural and Consulting Engineering Firms 

Municipalities, First Nations and Regional Districts 

Insurance  Companies,  Legal  Firms  and  Social 

Housing Organizations 

Page 6: Statement of Qualification - Horizon Eng...Statement of Qualification (February 2017) 3 1. Company Overview Since establishment in 1997, we have provided geotechnical engineering services

Statement of Qualification (February 2017) 

6  

4. Our Team  

4.1. Company Partners 

Horizon Engineering’s partners have more  than 50 

years  of  combined  experience  in  providing 

geotechnical consulting services and are supported 

by  engineers,  technical  staff  and  specialist  sub‐

consultants.  

Karen Savage, F.E.C., P.Eng. 

Karen has been providing geotechnical engineering 

services to the British Columbia building industry for 

three  decades,  with  emphasis  on  the  Lower 

Mainland.  Her  hands‐on  approach  and  strong 

knowledge  of  local  soil  conditions  has  been 

appreciated  by  stakeholders  in  residential 

developments, commercial developments, and civil 

infrastructure works. As well as providing traditional 

geotechnical  design  services  for  foundations, 

excavations, shoring systems, and pavements, Karen 

also provides insight into stormwater management, 

especially  as  it  relates  to  surface  and  sub‐surface 

drainage, stormwater infiltration, and sediment and 

erosion  control,  especially  for  LEED  projects. 

Between 2012 to 2014, Karen served as a Councillor 

of APEGBC.  

 

Karim Karimzadegan, M.A.Sc, P.Eng.  

Karim’s  past  16  years  with  Horizon  Engineering 

builds on his extensive and successful geotechnical 

engineering  career  experience  with  a  large 

engineering consultancy  in  Iran. His pragmatic and 

rigorous  approach  is  valued  by  his  clients  in  the 

residential,  development,  First Nations  and  public 

sectors. Karim provides geotechnical design services 

for  foundations,  excavations  and  infrastructure  as 

well  as  stormwater  management,  sediment  and 

erosion  control.  Karim  is  also  a  Registered 

Professional per the Health Act’s Sewerage System 

Regulation.  

4.2. Staff 

The  strength  of  our  team  comes  from  years  of 

experience  in  engineering  analyses,  construction 

field  review  and  material  testing  in  the  Lower 

Mainland. Each person on our engineering team has 

regular field responsibilities that keep us ‘grounded’ 

in the practicalities of construction.  

Horizon  Engineering  has  9  registered  professional 

engineers who are  supported by 11  technical and 

administrative support staff. Meet ‘the team’ on our 

website.  

 

Distribution of our 4000 projects in the Lower Mainland (open the online interactive map)